installation & operation guide - home and office safeshoneywellsafes.com/userfiles/manuals/hw...

Models 8732001, 8732101, 8732301, 8732401

Read this manual carefully before installing and operating!

Installation & Operation Guide

Electronic Entry Lock with Knob

ENGLISH

IndexINSTALLATION INSTRUCTIONS

Package Contents / Tools Required...........................................................Page 1

Prepare Door and Jamb...............................................................................Page 2

Adjusting Latch / Installing Latch...............................................................Page 3

Installing Exterior Assembly........................................................................Page 4

Installing Interior Assembly........................................................................Page 5-6

OPERATION INSTRUCTIONS

Exterior Assembly Overview......................................................................Page 7

Locking and Unlocking / Changing Programming Code / Adding User Codes......................................................................................Page 8

Deleting User Codes / Automatic Lock Function / Temporarily Disable Auto Lock..................................................................Page 9 Vacation Mode / Secure Lock-out Period / Sound ON and Off Restore Factory Settings / Low Battery Warning.....................................Page 10

Consumer Friendly Message Guide / Installation Trouble Shooting......Page 11

Consumer Assistance.................................................................................Page 12

Programming Record..................................................................................Page 13-14

Template.......................................................................................................Page 15-16

Limited Warranty.........................................................................................Page 17

INSTALLATION INSTRUCTIONS

Package Contents

Tools Required

Tools Required for Installation on Pre-drilled Doors:•PhillipsScrewdriver

Tools Required for Installation on Doors That Require Drilling:•Drill•TapeMeasure•Pencil•2-1/8”(54mm)DrillHoleSaw•1”(25mm)Drill•1/16”(2mm)Drill•Chisel•Hammer•PhillipsScrewdriver

DONOTRETURNTOSTORE!Ifanypartsaremissingordamaged,pleasecallCustomerServicetollfreeat1-877-354-5457(M-F7am–5pmPST)

Strike Plate

Latch(Adjustable)2-3/8”(60mm)to2-3/4”(70mm)

5/16”(8mm)Screws-2ea.


InteriorAssembly Mounting Plate

ExteriorAssembly

Entrykeys(2ea.)


1”(25mm)Screw-1ea.

NOTE: For installation on doors with pre-drilled holes skip to 4e.

1. TEMPLATE a.Cutouttemplateprintedonpage15ofthisManual (Figure1a).

b. Foldtemplateandplaceondoor36”(915mm)from thegroundasmarked(Figure1b).

2. MARK THE DOOR FOR DRILLING b. Mark center hole on door edge through guide on templatefor1”(25mm)latchbolt(Figure2a). a. Mark center hole on door face through guide on templatefor2-3/8”(60mm)or2-3/4”(70mm) backset(Figure2b).

3. DRILL AND CHISEL DOOR a.Drill2-1/8”(54mm)holethroughdoorfaceasmarked forlockset(Figure3a). b.Drill1”(25mm)holeincenterofdooredgefor Latch(Figure3b). c. Insert Latch in hole keeping it parallel to faceofdoor.MarkoutlineandremoveLatch (Figure3c). d.Chisel1/8”(3mm)deeporuntillatchfaceisflush withdooredge(Figure3d).

4. MARK AND DRILL DOOR JAMB a. MarkcenterholeonedgeofjambevenwiththecenteroftheLatchBoltondoor edge.(Figure4a).

b.Drill1”(25mm)hole1-3/16”(30mm)deepindoorjamboncentermark (Figure4b).

c.OutlineoutsideedgesofStrikePlate(Figure4c). d.Chisel1/8”(3mm)deepforStrikePlateoruntilflush(Figure4d). e.InstallStrikePlateusingtwo3/4”(19mm)screwsprovided(Figure4e).

PREPAREDOORANDJAMB

Figure4a Figure4b Figure4c Figure4eFigure4d

NOTE: For Drive in Latch, drill hole size indicated on template and press until it is flush with door edge.

Figure1a

Figure2a Figure2b

Figure3a

Figure3c

Figure1b

Figure3b

Figure3d

5. INSTALLING THE LATCH (need phillips head screwdriver) a.Makesurethefaceplatesitsflushwiththedoor.Donotforce thelatchintothemortiseflush.Chiseloutexcessmaterialif

necessaryforaflushfit(Figure5a). b.Usingtwo3/4”(19mm).screwsprovided,screwthelatchintothe doorwithahandheldscrewdriver.DONOTOVERTIGHTEN (Figure5b).

ADJUSTINGLATCH

NOTE: Latch is shipped with the backset set at 2-3/8” (60mm)Measurethebackset(backsetisdistancebetweenedgeofthedoorandthecenterofLock).

TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET

TO CONVERT FROM 2-3/4” (70mm) BACKSET TO 2-3/8” (60mm) BACKSET

2-3/8"(60mm )

PULL

2-3/4"(70mm)

PUSH

NOTE: Curved part of Latch always faces curved portion of Strike Plate

INSTALLINGLATCH

Figure5a

Figure5b

NOTE: Tailpiece must be positioned vertically

INSTALLINGEXTERIORASSEMBLY

7. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR a.Fromthesidemarked“Thissideagainstdoor”, route the Control Wire through the rectangular slotintheMountingPlate(Figure7a). b.PlaceMountingPlateagainstdoorwithtailpiecepassing throughthecenterholeinthethreeholeset(Figure7b). c.SecuretheMountingPlatetotheExteriorAssemblyusing two7/8”(22mm)Screws(Figure7c). d.HandtightenwithaPhillipsScrewdriverleavingloosely connected(Figure7d).

e.CheckthattheRubberGasketisproperlyalignedandcorrectasnecessary(Figure7e). f.Checkverticalalignmentofthelock(Figure7f). g.TightensecurelywithahandheldPhillipsScrewdriver.DO NOT OVER TIGHTEN

8. OPTIONAL INSTALLATION a.Usinga1/16”(2mm)drillbit,drillapilotholeinyourdoor usingtheMountingPlateupperholeasaguide(Figure8a). b. Insert one 3/4”(19mm)screwandtighten.

Mounting Plate

3/4”(19mm)screw(OptionalInstallation)

7/8”(22mm)screws

Control Wire

Figure8a

Figure7a-7f

NOTE: Rotate knob to ensure the latch is opening and closing easily.

6. INSTALLING THE EXTERIOR ASSEMBLY Note: WorkwiththeDoorOpenforeasyaccess.Toaccessthemountingplate,unpacktheInteriorAssemblyandremovethebatterycoverbyslidingthecoverupward.LocatethescrewsholdingtheMountingPlatetotheInteriorAssembly.RemovethescrewstoreleasetheMountingPlatefromtheInteriorAssembly.

a.UnpacktheExteriorAssembly.Usecaretonotscratchthegreencircuitboard during handling and installation.

b.CheckthattheRubberGasketisproperlyseatedontheExteriorAssembly (Figure6a-b).

c.InserttheExteriorAssemblyontothedoorwiththetailpiecegoingthroughthe Latch spindle in the VERTICAL POSITION. Route the Control Wire through

thedoorovertheLatch(Figure6c).

Rubber Gasket

Control Wire

Tailpiece(Vertical)

Latch Hole

Figure6a-b Figure6c

INSTALLINGINTERIORASSEMBLY

9. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY a.UsecaretoattachtheControlWiremaleplugtotheInteriorAssemblyfemale socketconnector(Figure9a). b.DonotforcetheControlWiremaleplugintotheInteriorAssemblyfemale socketconnector(Figure9b). c.TheControlWiremaleplughastwoalignmenttabsonthesmoothsideofthe plugwhichisthetopoftheplug(Figure9c). d.TheControlWiremaleplugisinsertedwiththesmoothsideupintotheInterior Assemblyfemalesocketconnector(Figure9d).

10. ATTACH THE INTERIOR ASSEMBLY TO DOOR a.PositiontheInteriorAssemblyoverthetailpieceandpushtheInteriorAssembly againstthedoor(Figure10a).

b.Usingtwo5/16”(8mm)screws and one 1”(25mm)screw, attach theInteriorAssemblytotheMountingPlate.DO NOT OVER TIGHTEN SCREWS

(Figure10b).

5/16”(8mm)screws

1”(25mm)screw

NOTE: Lock and unlock using Interior Knob to see if the latch is opening and closing easily.

Figure10a-b

Figure9a-dInterior Wire Connector Plug

11. Installing Batteries a.Insert4AAhighqualityAlkalinebatteriesintotheBatteryCompartmentinthe directionnoted+/-ontheCompartment.TheLockwillbeep2times,thekeypad willilluminateblue,andtheHoneywellbuttonwillflashgreentwicetosignifythat ithasreceivedpower(Figure11a).

b.SlidetheBatteryCoverdownintothetrackontheInteriorAssemblytocoverthebatteries(Figure11b).

12. Testing Lock WiththeDoorOpen a.TesttheLockusingtheInteriorKnob.TheLatchshouldmovesmoothly. b.TestthelockusingtheKeypad.Tolockpressandthenpress“1234” to unlock.

INSTALLINGINTERIORASSEMBLY(CONT.)

OverrideAccessKey

Exterior Assembly

Interior Assembly

Interior Knob

BatteryCover

Light Indicator

Keypad

NOTE: Do not touch the Keypad until the blue light turns off.Do not use rechargeable batteries or non-alkaline batteries.

Figure11a-b

INSTALLATION OVERVIEW

Strike Plate

BatteryCover

InteriorAssembly

Keys Exterior Assembly

Rubber Gasket

Tailpiece

Mounting Plate

Latch

5/16”(8mm)screwsOptional3/4”(19mm)screw

3/4”(19mm)screws

7/8”(22mm)screws

1”(25mm)Screw

OPERATION INSTRUCTIONS

ExteriorAssemblyOverview

Indicator light

Green •IndicatesSuccessfulProgrammingStep•IndicatesUnlockingisSuccessfulRed •IndicatesFailedProgrammingStep•IndicatesLockingisSuccessful

Electronic lock requires (4) High Quality AA Alkaline batteries. When all 4 batteries are installed in the correct position, hear 2 beeps and the keypad will illuminate blue. DO NOT TOUCH the keypad until the keypad stops illuminating.

Lock-UsedtolockdoorClear -Usedtoclearwrongkeypadentries

Unlock-UsedtounlockdoorProgramming -Usedinprogrammingsteps

5 Seconds -Completealltheprogrammingstepsintheprogrammingmodewithin5seconds.

Clear -Usethekeytoclearentriesincaseawrongbuttonispushed.

Lock button

Unlockbutton

FactorySettings

The lock comes factory preset with a:

Please change the ProgrammingCode and the User Codeas soon as possible after installation to insure security.

Programming code - 123456

User code - 1234

User ID - 01ID

PC

PC

UC

UC

Batteries(notincluded)

Programming Symbols

Lock / Clear

Unlock / Programming

Programming Code

User Code (4-8 digits)

User ID (01-50, 2 digits) ID

PC

UC

Programming Tips

TOUNLOCKTHELOCKUsingKeypad:EnteravalidUserCode(defaultcodeis1234)andpressandhear1 beep and lights green.

TOLOCKTHELOCKUsingKeypad:Pressandthenhear2beepsandlightsred.

CHANGECURRENTORPRESETPROGRAMINGCODEFactorydefaultProgrammingCode=123456,thisisthemasterpasswordforyourlock.Allprogrammingfunctionsrequirethiscode.FollowthebelowsequencetochangetheProgrammingCodetoyourcustom6digitcombination.

TOADDANEWUSERCODE(youcanaddupto50newusercodes)TheUserCodemustbea4-8digitcombination.EachUserCodeisthenlinkedtoaUserID(whichisanynumberbetween01-50)toidentifyanindividualUserCode.(UserID1-9shouldbeenteredas01-09sotheyare2digits).

Hear 1 beep and Light Indicator illuminates green.RecordNewandChangedCodesonProgrammingRecordlocatedonPage17.

Hear 1 beep and Light Indicator illuminates green.

NOTE:WhenaNEWUSERCODEisset,thedefaultfactorycode(1234)isdeletedfor safety.

RecordNewandChangedCodesonProgrammingRecordlocatedonPage17.

123456 08 56785678

Forexample:toaddtheUserID-08toUserCode-5678,enterthefollowing:

4newRe-enter

1Re-enter

LockingandUnlocking

Changing Programming Code

AddingUserCodes

ID

ID

ID

UC UC

UC UC

UC

PC

PC

PC PC

PC

PC

PC

DELETE ONE EXISTING OR PRESET USER CODETheunitcomeswithafactoryUserID=01forUserCode=1234.IMPORTANT:Todelete1UserCode,thelockmusthavemorethan1UserCodein its database.

SET OR CANCEL AUTO LOCK Youcansetthelocktoautomaticallycloseaftereachtimethelockisopened.Timevaluerange=20-900seconds,enterthefollowing:

DELETE ALL USER CODESIMPORTANT:thiswilldeletetheusercodesbutnottheprogrammingcode,enterthefollowing.


SetAutoLock:


To cancel Auto Lock set the time to 00, enter the following:

CancelTimeValueAutoLock:



2Existing re-enter

5TimeValue

500

3re-enter

DeletingUserCodes

AutomaticLockFunction

PC

PC

PC

PC PC

ID UC

UCUC

ID ID

DISABLE: WhileinAuto-Lockmode,unlockdoorusing,within10secondsyoumustturnthelockingknobbyhandtothelockedposition,waitmorethan2secondsthenturnthelockingknobbacktotheunlockposition.TheAuto-Lockmodeisnowdisabled.

RESTORE:TorestoretheAuto-Lockfuntion,youcanturnthelockingknobbyhandtothelockedposition,waitmorethan2secondsorpressthe Lock button on the keypad.

TemporarilyDisableAuto-Lock

PC

NOTE: If you only press the for more than 3 seconds but do not input PC , the system will remain in Vacation Mode.

WarningsoundsandLEDflashesredafter4incorrectcodeattempts:Keypadshutsdownfor30seconds.

To reset the lock to the original factory settings including the Programming Code andallUserCodesremoveonebatteryfor10seconds.Reinsertthebatteryandwaitforalongandshortbeep.Press3timeswithin3seconds.Thelockwillbeepandthelightindicatorwillturngreen.

BeepsandLEDflashesredfor5seconds.Replacewithgoodqualityalkalinebatteries.Note:RemovingbatteriesdoesnoteraseactiveProgrammingorUserCodes.

WithVacationModeenabled,thesystementersintolow-powercomsumptionmode.Duringthismode,allbuttonsandfunctionsincludingtheremotecontrollwillbeinvaliduntiltheyarere-enabled(seestepsbelow).

ENABLE:

DISABLE:TodisabletheVacationMode,youmustpressandholdformorethan3seconds,theninputtounlockthedoor.VacationModeisnowdisabled.

SecureLock-outPeriod

RestoreFactorySettings

LowBatteryWarning

VacationMode

UC

PC

Hear 1 beep and Light Indicator illuminates green then lock door

10 1 PC

PC

Youcan“mute”orturnthe“soundon”onyourlockbyenteringthefollowing.(Factorysettingissoundon).

SoundOff(1)-LightIndicatorilluminatesgreen.SoundOn(2)-Hear1beepandLightIndicatorilluminatesgreen.

61or2

SoundOnandOff

PC

1=SoundOff2=SoundOn

NOTE:Whenbatteryisunderlowvoltage,thelockwillgivethe(LowBatteryWarning:BeepsandLEDflashesredfor5seconds).Duringthistimeyourlockcanstillwork.Howeveroncethevoltageislowerthan4.3V(calledSuper-LowVoltage),theoperationofthelockingandunlockingwillnotwork,usermustreplacebatteriesimmediately.

Unlock/Validprogramming: 1longbeepandLEDilluminatesgreen

Lock: 2shortbeepsandLEDilluminatesred

InvalidProgramming: 2shortbeepsandLEDflashesredtwice

LowVoltage: Beepsfor5seconds(7/9timesdependsonoperationisunlock/lock)

SuperLowVoltage: 4shortbeepsandLEDflashesredfourtimes

4Incorrectcodeentryattempts: 2shortbeepsandLEDilluminatesredeachattempt

Poweron: 1longbeepand1shortbeepandLEDilluminatesgreen

ChipReset: 1longbeepand1shortbeepandLEDilluminatesgreen(mayoccurseveraltimesoronceinawhile)

LockError: 3longbeepsLEDflashesredthreetimes

RepeatoperationafterLockError: 2shortbeepsthreetimesLEDflashesredsixtimes

CONSUMERFRIENDLYMESSAGEGUIDE

INSTALLATIONTROUBLESHOOTING

Issue Solution

Lockwillnotfunctionelectronically

• Check that all batteries are fresh high quality Alkaline Batteries

• Check for proper polarity (+ -) of all batteries• Check that the Control Wire is attached to the

Interior Assembly

Latch is sticking. Installation screws of the lock may be too tight and have to be loosened• Remove Interior Assembly• Slightly loosen the Mounting Plate Screws• Lock and unlock using the Key• Reattach Control Wire and Interior Assembly

NOTE: If you only press the for more than 3 seconds but do not input PC , the system will remain in Vacation Mode.

EMAIL:[email protected]

WEBSITE:www.honeywellsafes.com

ADDRESS:ConsumerAssistanceDept.LHLicensedProducts,Inc.,860EastSandhillAvenueCarson,CA90746USA

TELEPHONE:US/Canada1-877-354-5457(TollFree)

Mexico01-800-288-2872AfterEnglishvoicerecordingstopsyoumustthenenter800-860-1677tocompleteyourcall.(TollFree)

Australia0011-800-5325-7000(TollFree)

Germany/NewZealand00-800-5325-7000(TollFree)

OtherCountriesXX*-310-323-5722(TollChargesApply)XX*-DialU.S.CountryCodefirst

CALLCENTERHOURS:US/Canada7am–5pm(Pacific**)Mon–Fri(Subjecttochange)CALLBACKHOURS:OtherCountries7am–8pm(Pacific**)Mon–Fri(Subjecttochange)Pacific**-LocaltimeinLosAngeles,CA,USA

*InsertcorrectCountryCode**LocalTimebasedonLosAngelesCaliforniaUSA INTERNATIONALCALLBACKHOURS:IfyouneedtospeakwithaconsumerassistantandcannotcontactusduringtheCallCenterhoursabove,pleasesendanemailorleaveatelephonemessage,includingyourName,TelephoneNumberandthebesttimeforustocontactyouduringtheCallBackhoursaboveandwewillmakeoureveryefforttocontactyouandhelpansweranyofyour questions or concerns.

CONSUMERASSISTANCE

My Codes: Date Created

ProgrammingCode (6digits)//

UserCode01 (4-8digits)//

























Programming Record

My Codes: Date Created


























Programming Record Continued

2-3/

8” (6

0mm

) BA

CK

SET

2-3/

4” (7

0mm

) BA

CK

SET

THENDRILL1”(25mm)HOLE

INCENTERDOOROFEDGE

2”(50mm)INDEPTH

MARK

FOR1-3/4”

(45mm)

DOOR

DRILL

2-1/8”(54mm)

HOLE

MARK

FOR1-3/8”

(35mm)

DOOR

IMPO

RTANT!

PLACETEMPLATE

ONHIGHEDGEOF

DOORBEVEL

PLACETOP

36”(915mm)

ABOVEFLOOR

BACK OF TEMPLATE

Limited Lifetime Mechanical and Finish Warranty / 1 Year Limited Electronics Warranty

Thisproductcomeswithalimitedlifetimemechanicalandfinishwarrantyandaoneyearlimitedelectronicswarrantytotheoriginalresidentialconsumeragainstdefectsinmaterialandworkmanshipundernormaluseaslongastheoriginalresidentialpurchaseroccupiestheresidentialpremisesuponwhichtheproductwasoriginallyinstalled.

ORIGINALRESIDENTIALCONSUMERThiswarrantyisnottransferable,andappliestotheoriginalpurchaseronly,aslongastheoriginalpurchaseroccupiestheresidentialpremisesuponwhichtheproduct(s)wasoriginallyinstalled.Proofofpurchase(originalsalesreceipt)andownershipmustaccompanyallwarrantyclaims.Allnon-homeownerpurchasers(includingpurchasersforindustrial,commercialandbusinessuse)arenotcoveredunderthetermsofthiswarranty.

WHATISNOTCOVEREDThiswarrantyisnullandvoidiftheproductwasusedforpurposesforwhichitwasnotdesigned.ThiswarrantyDOESNOTCOVERnormalwearandtearofpartsordamageresultingfromanyofthefollowing:negligentuse,misuseorabuseoftheproduct,orusecontrarytoorinviolationofwritteninstructionsprovidedbyLHLicensedProducts,Inc.Further,thiswarrantydoesnotcoverActsofGod,suchasfire,flood,hurricanesandtornadoes.ThiswarrantyDOESNOTCOVERscratches,abrasions,deteriorationduetotheuseofpaints,solventsoruseofcleanerscontainingabrasives,alcoholorothersolvents,whetherperformedbyacontractor,servicecompany,oryourself.ThiswarrantyDOESNOTCOVERproduct(s)usedincommercialapplications, used in common area applications, disassembly, repair or alteration by anyone other than LH Licensed Products, Inc., improper installation or exposure to extremes of heat or humidity. ThiswarrantyDOESNOTCOVERanylosses,injuriestopersonsorlossofproperty,generaldamagesorcosts,andshippingandfreightexpensesrequiredtoreturnproduct(s)toLH Licensed Products, Inc. LH Licensed Products, Inc. shall not be liable for any indirect, incidental or consequential damages of any nature relating to this lock. LH Licensed Products, Inc. isalsonotresponsibleforcostsassociatedwithremovingorreinstallingtheproduct.

ADDITIONALTERMSLH Licensed Products, Inc. does not authorize any person to create for it any obligation or liabilityinconnectionwiththeProduct.LHLicensedProducts,Inc.’smaximumliabilityhereunder is limited to the original purchase price of the Product. No action arising out of any claimed breachofthiswarrantybyLHLicensedProducts,Inc.maybebroughtbytheoriginalresidentialpurchasermorethanone(1)yearafterthecauseofactionhasarisen.

TheHoneywellTrademarkisusedunderlicensefromHoneywellInternationalInc.HoneywellInternationalInc.makesnorepresentationsorwarrantieswithrespecttothisproduct.

MEELKPKE-20160518www.honeywellsafes.com

Manufacturedby:LH Licensed Products, Inc. 860EastSandhillAvenueCarson,CA90746

installation & operation guide - home and office safeshoneywellsafes.com/userfiles/manuals/hw...

Documents