installation topfix / recessfix [r1] model 2402/52 2412/62 ......installation and user manual: 72...
TRANSCRIPT
72Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x
x x y
max.35 cm
max. 35 cm
z
X= 5 cm
Z=10 cm
y
B
A
C
CA
B
AB C
A
B
B
A
The adjustable Side-Brackets can be bend to the actual incline.
1 Clip installation (high rail)
2
3 Clip installation (bottom rail)
4 Installation sequence
5 Tensioning/slackening the steel wire
6 Operation
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
Removal
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
3 var 2 1 var var 2 4
4 var 2 1 var var 2 4
5 var 2 1 var var 2 4
0 - 80 cm
81 - 115 cm
116 - 150 cm
Product width Number of parts
21-0
3-20
14
2402/522412/62
[R1]
73Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x
x
x x
max.35 cm
max. 35 cm
X=5 cm
B
A
C
CA
B
4 BedieningA
B C
A
B
3 var var var 1 var var var 2
4 var var var 1 var var var 2
5 var var var 1 var var var 2
0 - 80 cm
81 - 115 cm
116 - 150 cm
1
2
4 Fitting the covers
5 Installation sequence
6 Tensioning/slackening the steel wire
5-A1 5-A2
5-B/C1 5-B/C2
Rail installation sequence on Clips
Removal 7 Operation
1A Cover strip
3
Installation bottom rail / Installation higher rail
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
Number of parts Product width
21-0
3-20
14
2402/522412/62
[F1]
74Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
x x y
y
z
z
max. 35 cm
X = 5 cm
Z=5 - 10 cmmax. 35 cm
max. 35 cm
B
A
C
CA
B
Removal
4 BedieningA
B C
1 1 Clip installation
2 Clip installation (bottom rail)
3 Installation sequence
4 Tensioning/slackening the steel wire
3-A1 3-A2
3-B/C1 3-B/C2
Rail installation sequence on Clips
5 Operation
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
3 var 1
4 var 1
5 var 1
0 - 80 cm
81 - 115 cm
116 - 150 cm
var
var
var
Product width Number of parts
21-0
3-20
14
2602/522612/62
[R1]
75Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
x x
x
x
max. 35 cm
max. 35 cm
max. 35 cmX = 5 cm
B
A
C
CA
B
Removal
4 BedieningA
B C
0 - 80 cm
81 - 115 cm
116 - 150 cm
3
4
5
var
var
var
var
var
var
var
var
var
1
1
1
var
var
var
var
var
var
1 FaceFix installation (top rail)
2 Clip installation (bottom rail)
3 Fitting the lower covers
4 Installation sequence
5 Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
6 Operation
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
Number of parts Product width
21-0
3-20
14
2602/522612/62
[F1]
76Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
X=5 cm
Z=10 cm
x z
z
ymax. 35 cm
z
max. 35 cm
y
B
C
A
B
A
The adjustable SideBrackets can be bend to the actual incline.
1 Clip installation (high rail)
2
3 Clip installation (bottom rail)
5 Tensioning/slackening the steel wire
CA
B
AB C
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
Removal
4 Installation sequence
6 Operation
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
2 var 2 1 2 var var 4
3 var 2 1 2 var var 4
4 var 2 1 2 var var 4
0 - 80 cm
81 - 115 cm
116 - 150 cm
Product width Number of parts
21-0
3-20
14
2702/522712/62
[R1]
77Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
X=5 cm
x x
x
x
max. 35 cm
max. 35 cm
0 - 80 cm
81 - 115 cm
116 - 150 cm
3 1 2 2var var var var var
4 1 2 2var var var var var
5 1 2 2var var var var var
B
C
A
1 4 Fitting the covers
5 Installation sequence
6 Tensioning/slackening the steel wire
CA
B
AB C
5-A1 5-A2
5-B/C1 5-B/C2
Rail installation sequence on Clips
Removal 7 Operation
2
1A Cover strip
3
Installation bottom rail / Installation higher rail
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
Number of parts Product width
21-0
3-20
14
2702/522712/62
[F1]
78Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
x x ymax. 35 cm
max. 35 cm
x
x
max.35 cm
X = 5 cm
y
C
B
A
A
B
2 Clip installation (bottom rail)
1 Clip installation (high rail)
3 Installation sequence
3-A1 3-A2
3-B/C1 3-B/C2
Rail installation sequence on Clips
4 Tensioning/slackening the steel wire
CA
B
AB C
Removal 5 Operation
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
0 - 80 cm
81 - 115 cm
116 - 150 cm
3
4
5
var
var
var
1
1
1
var
var
var
Product width Number of parts
21-0
3-20
14
2802/522812/62
[R1]
79Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
x xmax. 35 cm
max. 35 cm
x
x
max.35 cm
X = 5 cm
C
B
A
A
B
3 var var var 1 var var
4 var var var 1 var var
5 var var var 1 var var
0 - 80 cm
81 - 115 cm
116 - 150 cm
1 Clip installation (toprail)
2 Clip installation (bottom rail)
3 Fitting the covers
4 Installation sequence
5 Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
CA
B
AB C
Removal 6 Operation
Note: if necessary, before clicking the rail into place, slacken the steel wire. After clicking, place cover on the bottom clips.
ush rmly to the right left to tension slacken the steel wire
Number of parts Product width
21-0
3-20
14
2802/522812/62
[F1]
42Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
X = 5 cm
x
x
xx max. 70 cm
max
. 70
cmC
A
B
4-A1 4-A2
4 Bediening4-C1 4-C2
4 Bediening
AB C
AB C
1
1 Cover installation
4 Rail installation sequence on Clips
Removal 5 Positioning the fastening hook(s)
- Click the pleated blind into place with the lower rail and unfold it all the way - Mark the hole positions on the frame, in line with the eyes in the fabric - Remove the pleated blind, drill the holes, install the screw hooks - Install the rails and the blind as shown in ure
2 Clip installation (toprail)
3 Clip installation (bottom rail)
Rail installation sequence on Clips
4 4
6 6
4
6
0 - 80 cm
81 - 120 cm
var
var
Product width Number of parts
21-0
3-20
14
3507/573517/67
[R1]
43Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x
x
xx max. 70 cm
max
. 70
cm
X = 5 cm
4 Bediening
4 Bediening
4
6
8
12
var
var
0 - 80 cm
81 - 120 cm
4 Positioning the fastening hook(s)
2
1 Clip installation (toprail)
C
A
B
3 Rail installation sequence on Clips
Clip installation (bottom rail)
3-A1 3-A2
3-C1 3-C2
Rail installation sequence on Clips
AB C
AB C
Removal
- Click the pleated blind into place with the lower rail and unfold it all the way - Mark the hole positions on the frame, in line with the eyes in the fabric - Remove the pleated blind, drill the holes, install the screw hooks - Install the rails and the blind as shown in ure
Number of parts Product width
21-0
3-20
14
3507/573517/67
[F1]
34Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x
x
x x x y
x y
max.70 cm
X=5 cm
max. 70 cm
max. 70 cm
C
B
A
4 Bediening
A
B
4 Bediening
1
After clicking, place cover on the top clips.
5 Staaldraad spanning
steel wire
1 Cover installation
2 Clip installation (toprail)
3 Clip installation (bottom rail)
4 Installation sequence
5 Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
6 Operation
CA
B
AB C
Removal
On smaller widthdifferences there is no cord in the rectangular part and there is also no sloping Fixrail.
2 2 var var 1 var
3 3 var var 1 var
0 - 80 cm
81 - 150 cm
Product width Number of parts
21-0
3-20
14
38023852
[R1]
35Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x
x
x x x
x
max.70 cm
X=5 cm
max. 70 cm
max. 70 cm
C
B
A
A
B
0 - 80 cm
81 - 150 cm
var var 2
var
var
var var
var
var 3
var
var
var
var
1
1
4 Bediening
1 FaceFix installation (top rail)
2 FaceFix installation (bottom rail)
3 Fitting the top covers
4 Installation sequence
5 Staaldraad spanning
steel wireOn smaller widthdifferences there is no cord in the rectangular part and there is also no sloping Fixrail.
5 Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
CA
B
AB C
Removal 6 Operation
After clicking, place cover on the top clips.
Number of parts Product width
21-0
3-20
14
38023852
[F1]
36Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
Installation TopFix / RecessFix [R1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
xx
x x
xx
y
max
. 70
cm
max. 70 cm
max. 70 cm
max. 70 cm
X=5 cm
y
CD
A
B
4 Bediening
A
B
4 Bediening
After clicking, place cover on the top clips.
4 Bediening1
1 Cover installation
2 Clip installation (bigger rail)
3 Clip installation (bottom rail)
4-A1 4-A2
4-B/C/D1 4-B/C/D2
Rail installation sequence on Clips
CA
B
AB C
Removal 6 Operation 5 Staaldraad spanning
steel wireOn smaller widthdifferences there is no cord in the rectangular part and there is also no sloping Fixrail.
5 Tensioning/slackening the steel wire
4 Installation sequence
2 2 var var 1 var
3 3 var var 1 var
0 - 80 cm
81 - 150 cm
Product width Number of parts
21-0
3-20
14
38123862
[R1]
37Installation and User manual:
Model
Instal
lation
and U
ser’s
man
ual P
B - G
B
Subject to technical changes
FaceFix installation to a window frame / wall [F1]Do not damage the product when using a sharp knife to open the packaging! Fitting screws: Use a size-2 screwdriver (PO-ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning from using too thick screw heads!
x x
xx
x x
xx
max
. 70
cm
max. 70 cm
max. 70 cm
max. 70 cm
X=5 cm
CD
A
B
4 Bediening
After clicking, place cover on the top clips.
A
B
0 - 80 cm
81 - 150 cm
var var 2
var
var
var var
var
var 3
var
var
var
var
1
1
1 FaceFix installation (small clip)
3 Fitting the covers
2 Clip installation (bigger rail)
4 Installation sequence
5 Staaldraad spanning
steel wireOn smaller widthdifferences there is no cord in the rectangular part and there is also no sloping Fixrail.
5 Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C/D1 4-B/C/D2
Rail installation sequence on Clips
CA
B
AB C
Removal 6 Operation
Number of parts Product width
21-0
3-20
14
38123862
[F1]