instruction 5 - new bedhead · insert connector pins (part f) into holes located on the top of...

NEW AIM PTY LTD

Made in China

BBed-JM01JM-01

P.1

Safety Precaution

WARNING: TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND ARE

NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9

WARNING: THE UPPER BUNK MUST BE MORE THAN 2 M FROM ANY

CEILING FAN.

Falls from elevated beds can be fatal and deaths have occurred

where children have fallen from elevated beds. This is relevant for

all ages. The risk is greater for younger children.

The risk of injury or death from a fall from an elevated bed

compared to a non-elevated bed is:

10 x greater for 7-8 year olds



!

!

P.2

Safety Precaution

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED

SAFETY WARNINGS AND GENERAL INSTRUCTIONS

Follow the instruction on the WARNING labels on top bunk and the package.

DO NOT REMOVE THE LABELS FROM THE BED

Always use the recommended size mattress, mattress support, or both, to prevent

the likelihood of entrapment or falls

The top surface of the mattress must be at least 5 inches below the upper edge of

the guardrails

Weight Capacity on top bunk is 65kg

DO NOT allow horseplay on the bunk bed. Always PROHIBIT jumping on the bed

Children SHOULD BE discouraged from playing on the bunk bed

Periodically check and ensure that the guardrail, access device and other

components are maintained in the correct position and state of repair and that all

connectors are tight

DO NOT use any substitute parts. Contact the manufacturer or dealer for

replacement parts

STRANGULATION HAZARD - Never attach or hang items to any part of the bunk

that are not designed for use with the bed, but not limited to hooks, belts,

or jump ropes

Keep these instructions in a safe place for future reference

Part List

P.3

Nut

Allen Key

Wood dowel

Wheel

A

B

C

D

E

K

G

H

F

M

N

O

P

Q

64

24

24

1

56

2

26

6

4

8

8

8

16

Tools required

O1O1 :12

K1 K2

O2 O2 :12Lay out all the parts and check the quantity

Bunk Bed Part List

P.4

E

E

E

EE

E

E

E

E EE

E

E

E

E

E

E

E

5

1

3

2

46

7

22

22

18

18

23

10

10

22

11

11

11

21

21

20

20

17

17

14

14

11

11

16

16

15

9

9

9

18

23

10

9

9

8

x2

E

E

23 x2

x2 x2

x4x4

Inserts the wooden connectors (Part E) into the boards (Part 09, 10, 11, 14, 17, 18, 20, 21, 22,23) (as illustration)

!

Drawer Part List

P.5

1

2

2

3

5

3

3

6

4

4

Instructions

P.6

Step 1:

B

B

B

B

G

GG

G

G

G

GG

B

GG

B

GG

B

GG

B

G

G

C

C

C

C

C

C

C

C

1

2

4

3

18

23

10

9

9

22

5

6

7

8

18

23

10

9

9

22

Headboard and Footboard

Headboard

Footboard

Insert bolts (Part B & G) into the posts (01 & 02). Place the nuts (Part C) on each end of headboards (09). Screw the bolts through the posts and headboards securely. Insert bolts (Part B & G) into the posts (03 & 04). Place the nuts (Part C) on each end of headboards (09). Screw the bolts through the posts and headboards securely.

Insert bolts (Part B & G) into the posts (05 & 06). Place the nuts (Part C) on each end of footboards (09). Screw the bolts through the posts and footboard securely.Insert bolts (Part B & G) into the posts (07 & 08). Place the nuts (Part C) on each end of footboards (09). Screw the bolts through the posts and footboard securely.

Instructions

P.7

Step 2:

c

c

c

c

B

B

B

B

BB

B

Bcc

cc11

11

D

Note: Side rail with hole for the ladder side!

c

c

Lower Bunk

Use bolts and nuts (Part B and C) to secure the side rails (Part 11) with the assembled headboard and footboard, forming 2 bed frames (as illustration).

Hand tighten all bolts with allen wrench

Instructions

P.8

Step 3:

11

11

G

G

GG

c

c

c

B

B

B

B

BB

B

Bc

cc

c

c

20

14

21

17

D

Note: Side rail with hole for the ladder side!

Upper Bunk


Use bolts and nuts (Part B, C, and G) to �rmly secure side boards (14, 20, 17, and 21) with the assembled bed frame in step 2 .

F

F

F

F

Instructions

P.9

Step 4: Connecting the upper bunk with the lower bunk

Insert connector pins (Part F) into holes located on the top of lower bunk foot and headboard. Place top bunk over pins and onto lower bunk

Instructions

P.10

Step 5:

D

K1

K2

G

G

A

A

A

A

H

H

H

H

15 16

16HH

HH

Secure the upper bunk bed with the lower one with Screws (Part A).

Secure the upper bunk bed and ladder


Ladder

Use Screws (Part G, H, and K) to secure the side rail in the upper bunk with vertical ladder support (Part 15), and the horizontal ladder support (Part 16) with both vertical ladder supports (Part 15) and post.

Instructions

P.11

Step 6:

A x28

x14

x14

Mattress Support Slat Set

Insert the slats into the slots in the mattress side rails. Ensure there is a slat in every slot.Secure each of the slats in the slots with screws (Part A) to the assembled frame in step 5.

Instructions

P.12

Step 7:

O1

O21

2

2

M

O1M

Drawers

Use the wooden connectors (Part M) and bolts (Part O) to combine the side (Part 2) with the front board of the drawers (Part 1).

Phillips-head (Crosshead) screwdriver is required.

Instructions

P.13

Step 8:

1

2

2

6

O2

O1E

Use the wooden connectors (Part E) and bolts (Part O) to secure the underneath support (Part 6) with the front board of the drawer (Part 1).

1

26

4

4

Instructions

P.14

Step 9:

3

3

3

2

As the illustrated direction, slide the parts (Part 3 & 4) into the assembled parts in step 2.

The order is Part 3, Part 4, Part 3, Part 4 and lastly Part 3.

1

2

3

3

3

4

4

P

P

P

P

1

2

Instructions

P.15

Step 10:

5

5

O2

O1E

56

2

3

3

3

4

4

2

Combine the end part of the drawer (Part 5) to the assembled drawer in step 9 with screws (Part O & P) and wooden connectors (Part E)

Instructions

P.16

Step 11:

25

6

QQ

N

QQ

N

QQ

N

QQ

N

Screw the wheels (Part N) into the all corners of drawer with Part Q.

Instructions

P.17

Step 12:

Repeat the steps above to assemble the other drawer and put both drawers underneath the bunk bed.

Your bunk bed assembly is now complete. Please review all safety instructions.

Finish

instruction 5 - new bedhead · insert connector pins (part f) into holes located on the top of...

Documents