instruction smartturbo
TRANSCRIPT
-
8/18/2019 Instruction SmartTurbo
1/3
Piasiniengineering [email protected] - http://www.piasiniengineering.it
Tel: +390342489060 - Fax: +390342488298
ECU : Smart 1.1 Turbo
Pin out - Front view :
Plug B:
Power Supply (+12 V) - Pin 80
Ignition (+12 V) - Pin 65
Ground - Pin 59
K Line - Pin 79
-
8/18/2019 Instruction SmartTurbo
2/3
Enable's Pin:
You have to put a resistor(680 Ohm) between the 2 pins in the picture.
Piasiniengineering [email protected] - http://www.piasiniengineering.it
Tel: +390342489060 - Fax: +390342488298
-
8/18/2019 Instruction SmartTurbo
3/3
Piasiniengineering [email protected] - http://www.piasiniengineering.it
Tel: +390342489060 - Fax: +390342488298
Bootstrap's Pin:
This is the Bootstrap's pin you have to
connect to the blue wire of Serial Suite, for
qualify the reading and writting of ECU