instructions ftv manual samengevoe… · comme au crépuscule les jours d'été,...
TRANSCRIPT
INSTRUCTIONS
Safety instructions
· Keep the product and its accessories out reach of children.
·The product can only be used indoors.
· The product must not be operated in humid environments.
· Do not look directly into the LEDs. The LED lights are very bright and do harm to your eyes.
· Do not try to take the product apart or repairing it by yourself!
· If there is something wrong with the product, you can contact service center or other suitable
specialist workshop.
Functions
The product is intended to simulate the lighting conditions of a color television set, and only for
private use, not for industrial or commercial use.
Device View
1) LED Panel
2) Bottom shell
3) EU plug
4) Dusk sensor
5) Functional switch
Installing Device
The location for the device should meet the following requirements:
· Rooms with exterior Windows, so the dusk sensor is exposed to darkness then it can be
activated.
· The dusk sensor can also activated in Flash street lights or car headlights on busy road.
· The device may be not visible from the outside.
The projected light of the device must be visible on the walls and ceiling from outside.
Operation
Switch on / off
The function switch can be found on the back of the unit. There are four positions available.
Switch ON
Slide the function switch to the ON position to turn on the TV Simulator.
INSTRUCTIONS
Switch on after 4 or 7 hours by dusk sensor
Such as at dusk in summer days, the device switches itself on and simulates a color television set
flickering light for 4 hours.
When exposed to light, the TV Simulator won’t switch off before the 4 or 7 hours have lapsed.
· Slide the function to the switch + 4 position to activate this function.
Two blue LEDs will illuminate to indicate that the device in this mode is available.
· Slide the function switch to the + 7 position to activate this function.
Three green LEDs will illuminate to indicate that the device in this mode is available.
Switch Off
Slide the function switch to the OFF position to turn off the TV Simulator.
Technical data
Wattage 2 Watt
Input Voltage 100 – 240 V~/ 50 – 60 Hz
Disposal
APPLIANCES
Do not throw your device in the normal household waste at the end of its useful life.
Check with your Local Authority or retailer for recycling advice.
Imported by:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
KBO-nr: BE0897.991.257
Veiligheidsinstructies
INSTRUCTIONS
· Houd het product en de accessoires buiten het bereik van kinderen.
· Het product kan alleen binnenshuis worden gebruikt.
· Het product mag niet worden gebruikt in een vochtige omgeving.
· Niet rechtstreeks in de LED's kijken. De LED-lampjes zijn bijzonder fel en brengen schade toe aan
uw ogen.
· Probeer het product niet zelf uit elkaar te halen of te repareren!
· Als er iets mis is met het product dan kunt u contact opnemen met het servicecentrum of een
andere gespecialiseerde reparatiedienst.
Functies
Het product is bestemd om de lichtomstandigheden van een kleurentelevisie te simuleren, en
alleen voor privégebruik, niet voor industrieel of commercieel gebruik..
Apparaatoverzicht
6) LED Paneel
7) Onderste laag
8) EU stekker
9) Schemersensor
10) Functieschakelaar
Apparaat Installeren
De plaatsing van het apparaat moet aan de volgende eisen voldoen:
· Kamers met buitenramen zodat de schemersensor wordt blootgesteld aan de duisternis en zo
kan worden geactiveerd.
· De schemersensor kan ook in flits straatverlichting geactiveerd worden of bij autokoplampen op
drukke wegen.
· Het apparaat mag van buitenaf niet gezien worden.
Het geprojecteerde licht van het apparaat moet van buitenaf zichtbaar zijn op de wanden en het
plafond.
Werking
Aan/uitschakelen
De functieschakelaar bevindt zich op de achterkant van het apparaat. Er zijn een viertal
keuzemogelijkheden.
Aanzetten
Schuif de functieschakelaar naar de stand AAN om de TV-simulator aan te zetten.
INSTRUCTIONS
Schakel in na 4 of 7 uur via de schemersensor
Bij schemering in de zomer schakelt het apparaat zichzelf aan en simuleert gedurende 4 uur een
flikkerend kleurentelevisie.
Bij blootstelling aan licht schakelt de TV-simulator niet uit voordat de 4 of 7 uur zijn verstreken.
· Schuif de functieschakelaar naar de + 4 positie om deze functie te activeren.
Twee blauwe LED's zullen oplichten om aan te geven dat het apparaat in deze modus
beschikbaar is.
· Schuif de functieschakelaar naar de + 7 positie om deze functie te activeren.
Drie groene LED's zullen oplichten om aan te geven dat het apparaat in deze modus beschikbaar
is.
Uitzetten
Schuif de functieschakelaar naar de stand UIT om de TV-simulator uit te zetten.
Technische informatie
Vermogen 2 Watt
Ingangsspanning 100 – 240 V~/ 50 – 60 Hz
Afvalverwijdering
APPARATEN
Gooi uw apparaat niet aan het einde van zijn levensduur bij het normale huisvuil. Neem
contact op met uw gemeente of detailhandelaar voor recyclingadvies.
Geïmporteerd door:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
KBO-nr: BE0897.991.257
Consignes de sécurité
INSTRUCTIONS
· Maintenez le produit et ses accessoires hors de portée des enfants.
· Le produit ne peut être utilisé qu’à l’intérieur.
· Le produit ne peut être utilisé en environnement humide.
· Ne regardez pas directement en direction des DELs. Leur lumière est très brillante et peut
endommager vos yeux.
· N’essayez pas de démonter ou réparer le produit par vous-même !
· En cas de problème avec le produit, vous pouvez contacter le centre de service ou un autre
atelier spécialisé.
Fonctions
Le produit est conçu pour simuler les conditions d’éclairage d’un téléviseur couleur, et est conçu
uniquement pour un usage privé, et non pour un usage industriel ou commercial.
Vue de l’appareil
11) Panneau DEL
12) Boitier inférieur
13) Prise UE
14) Capteur d’obscurité
15) Interrupteur
Installation de l’appareil
L’emplacement de l’appareil doit remplir les conditions suivantes :
· Pièces avec fenêtres sur l’extérieur, afin que le capteur soit exposé à l’obscurité et puisse être
activé.
· Le capteur d’obscurité peut également être activé par les réverbères de la rue ou les phares de
voiture sur une route très fréquentée.
· L’appareil peut ne pas être visible depuis l’extérieur.
La lumière projetée de l'appareil doit être visible de l'extérieur sur les murs et le plafond.
Utilisation
Interrupteur
L’interrupteur est situé à l’arrière de l’appareil. Quatre positions sont possibles.
Position allumée (ON)
INSTRUCTIONS
Faites glisser l’interrupteur sur ON pour allumer le simulateur de télévision.
Allumage après 4 ou 7 heures grâce au capteur d’obscurité
Comme au crépuscule les jours d'été, l'appareil s'allume et simule la lumière scintillante d'un
téléviseur couleur pendant 4 heures.
Lorsqu'il est exposé à la lumière, le simulateur de télévision ne s’éteint pas avant 4 ou 7 heures.
· Faites glisser l’interrupteur sur la position + 4 pour activer cette fonction.
Deux voyants bleus s'allument pour indiquer que le périphérique fonctionne sur ce mode.
· Faites glisser l’interrupteur sur la position + 7 pour activer cette fonction.
Trois voyants verts s'allument pour indiquer que le périphérique fonctionne sur ce mode..
Position éteinte (OFF)
Faites glisser l’interrupteur sur OFF pour éteindre le simulateur de télévision.
Données techniques
Puissance 2 Watt
Tension d’entrée 100 – 240 V~/ 50 – 60 Hz
Mise au rebut
Appareils
Ne jetez pas votre appareil avec les ordures ménagères normales à la fin de sa vie.
Renseignez-vous auprès de votre autorité locale ou de votre détaillant pour obtenir des conseils
sur le recyclage.
Importé par :
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
Num. KBO : BE0897.991.257
Sicherheitshinweise
INSTRUCTIONS
· Bewahren Sie das Produkt und das Zubehör außerhalb der Reichweite von Kindern auf.
· Das Produkt kann nur in Innenräumen verwendet werden.
· Das Produkt darf nicht in feuchter Umgebung betrieben werden.
· Schauen Sie nicht direkt in die LED-Beleuchtung. Die LED-Leuchten sind sehr hell und schädigen
Ihre Augen.
· Versuchen Sie nicht, das Produkt zu zerlegen oder selbst zu reparieren!
· Wenn etwas mit dem Produkt nicht stimmt, können Sie sich an das Service Center oder eine
andere geeignete Fachwerkstatt wenden.
Funktionen
Das Produkt soll die Lichtverhältnisse eines Farbfernsehgeräts simulieren und ist nur für den
privaten Gebrauch gedacht, nicht für den industriellen oder kommerziellen Gebrauch.
Geräteansicht
16) LED-Anzeige
17) Untere Schale
18) EU-Stecker
19) Dämmerungssensor
20) Funktionsschalter
Gerät installieren
Der Standort des Geräts sollte die folgenden Anforderungen erfüllen:
· Räume mit Außenfenstern, damit der Dämmerungssensor der Dunkelheit ausgesetzt ist, dann
kann er aktiviert werden.
· Der Dämmerungssensor kann auch bei Blitzlicht oder Autoscheinwerfern auf stark befahrenen
Straßen aktiviert werden.
· Das Gerät ist möglicherweise von außen nicht sichtbar.
Das projizierte Licht des Geräts muss von außen an den Wänden und an der Decke sichtbar sein.
Betrieb
Ein-/ Ausschalten
Der Funktionsschalter befindet sich auf der Rückseite des Geräts. Es stehen vier Positionen zur
Verfügung.
Einschalten
Schieben Sie den Funktionsschalter in die Position ON, um den TV-Simulator einzuschalten.
INSTRUCTIONS
Einschalten nach 4 oder 7 Stunden durch Dämmerungssensor
Wie in der Dämmerung an Sommertagen schaltet sich das Gerät ein und simuliert für 4 Stunden
ein flackerndes Farbfernsehlicht.
Bei Belichtung schaltet sich der TV-Simulator erst nach 4 oder 7 Stunden aus.
· Schieben Sie die Funktion in die Position Schalter + 4, um diese Funktion zu aktivieren.
Zwei blaue LEDs leuchten, um anzuzeigen, dass das Gerät in diesem Modus verfügbar ist.
· Schieben Sie den Funktionsschalter auf die Position + 7, um diese Funktion zu aktivieren.
Drei grüne LEDs leuchten, um anzuzeigen, dass das Gerät in diesem Modus verfügbar ist.
Ausschalten
Schieben Sie den Funktionsschalter auf OFF, um den TV-Simulator auszuschalten.
Technische Daten
Wattleistung 2 Watt
Eingangsspannung 100 – 240 V~/ 50 – 60 Hz
Beseitigung
Geräte
Werfen Sie Ihr Gerät am Ende seiner Lebensdauer nicht in den normalen Hausmüll.
Wenden Sie sich an Ihre örtliche Behörde oder Ihren Händler, um Informationen zum Recycling
zu erhalten.
Importiert von:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
KBO-nr: BE0897.991.257
Instrucciones de seguridad
· Guarde este producto y sus accesorios fuera del alcance de los niños.
INSTRUCTIONS
· El producto solo puede usarse en interiores.
· El producto no debe activarse en ambientes húmedos.
· No mire directamente las luces LED. Estas luces son muy brillantes pueden causar daños en sus
ojos.
· No intente desarmar o reparar el producto por su cuenta.
· Si algo anda mal con el producto, puede contactar el centro de servicio u otro taller especialista
adecuado.
Utilidad
El producto está destinado a similar las condiciones de iluminación de un televisor a color, y es
solo para uso privado, no para uso industrial o comercial.
Vista del dispositivo
21) Panel LED
22) Carcasa inferior
23) Clavija EU
24) Sensor de oscuridad
25) Interruptor de función
Instalación del dispositivo
La ubicación del dispositivo debe cumplir los siguientes requisitos:
· Habitaciones con ventanas exteriores, por lo que el sensor de oscuridad está expuesto a la
oscuridad y se pueda activar.
· El sensor de anochecer también se puede activar con las luces de la calle o con los faros de los
automóviles en carreteras con mucho tránsito.
· El dispositivo no puede ser visible desde el exterior.
La luz proyectada del dispositivo debe ser visible en las paredes y el techo desde el exterior.
Funcionamiento
Encendido / apagado
El interruptor de función se puede encontrar en la parte posterior de la unidad. Hay cuatro
posiciones disponibles.
Encendido
Deslice el interruptor de función a la posición ON (encendido) para encender el simulador de TV.
INSTRUCTIONS
Encender después de 4 o 7 horas con el sensor de oscuridad
Tal como al anochecer en los días de verano, el dispositivo se enciende y simula una luz
parpadeante de un televisor a color durante 4 horas.
Cuando se expone a la luz, el simulador de TV no se apaga antes de que hayan transcurrido las 4
o 7 horas.
· Deslice el interruptor de función a la posición + 4 para activar esta función.
Se iluminarán dos LED azules para indicar que el dispositivo está disponible en este modo.
· Deslice el interruptor de función a la posición + 7 para activar esta función.
Se iluminarán tres LED verdes para indicar que el dispositivo está disponible en este modo.
Apagado
Deslice el interruptor de función a la posición OFF (apagado) para apagar el simulador de TV.
Información técnica
Vataje: 2 Watt
Voltaje de entrada: 100 – 240 V~/ 50 – 60 Hz
Eliminación
ELECTRODOMÉSTICOS
No arroje el dispositivo a la basura doméstica normal, al final de su vida útil. Consulte
con su autoridad local o minorista para obtener consejos de reciclaje.
Importado por:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
KBO-nr: BE0897.991.257
Istruzioni di sicurezza
INSTRUCTIONS
- Mantenere il prodotto e i suoi accessori fuori dalla portata dei bambini.
- Il prodotto può essere utilizzato esclusivamente all’interno.
- Non utilizzare in ambienti umidi.
- Non fissare direttamente le luci a LED. Le luci a LED sono estremamente luminose e possono
danneggiare gli occhi.
- Non disassemblare il prodotto e non tentare di ripararlo da soli!
- In caso di malfunzionamenti del prodotto contattare il servizio di assistenza o un negozio
specializzato.
Funzioni
Questo prodotto ha lo scopo di simulare le condizioni di illuminazione fornite da un televisore a
colori ed è da intendersi solo per uso privato e non per usi industriali o commerciali.
Diagramma del dispositivo
26) Pannello a LED
27) Parte inferiore dell’involucro
28) Spina a norma UE
29) Sensore di oscurità
30) Selettore di funzioni
Installazione del dispositivo
Il dispositivo deve essere installato in un ambiente che rispetta i seguenti requisiti:
- una stanza dotata di finestre esterne in modo che il sensore di oscurità possa essere attivato
correttamente una volta raggiunto il giusto livello di oscurità.
- Il funzionamento del sensore di oscurità può essere influenzato dall’illuminazione stradale o dai
fari delle macchine su strade trafficate.
- Il dispositivo non dovrebbe essere visibile dall’esterno.
- La luce proiettata dal dispositivo deve essere visibile, su muri e soffitti, dall'esterno.
Utilizzo
Interruttore di accensione/spegnimento
L’interruttore di accensione/spegnimento si trova sulla parte posteriore dell’unità. Sono presenti
quatto impostazioni.
Interruttore su ON
Far scorrere l’interruttore nella posizione ON per accendere il simulatore della televisione.
INSTRUCTIONS
Accensione per 4 o 7 ore tramite sensore di oscurità
In questa modalità il dispositivo si accende al tramonto, simulando l’illuminazione fornita da una
televisione accesa per 4 o 7 ore.
Anche se esposto alla luce il simulatore di illuminazione fornita dalla TV non si spegne prima che
siano trascorse 4 o 7 ore.
- Far scorrere l’interruttore nella posizione +4 per attivare il funzionamento dal tramonto per 4
ore.
Due luci a LED di colore blu si accendono per indicare che il dispositivo è in questa modalità.
- Far scorrere l’interruttore nella posizione +7 per attivare il funzionamento dal tramonto per 7
ore.
Due luci a LED di colore verde si accendono per indicare che il dispositivo è in questa modalità.
Interruttore su OFF
Far scorrere l’interruttore nella posizione OFF per spegnere il simulatore della televisione.
Parametri tecnici
Potenza 2 Watt
Tensione di Ingresso 100 – 240 V~/ 50 – 60 Hz
Smaltimento
dispositivo
Al termine della sua vita operativa non smaltire questo prodotto insieme ai normali rifiuti
domestici. Contattare le autorità locali o un rivenditore per le informazioni sulle modalità di
riciclo.
Importato da:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
Codice KBO: BE0897.991.257
Instrukcje bezpieczeństwa
INSTRUCTIONS
· Przechowuj produkt i jego akcesoria poza zasięgiem dzieci.
· Produkt nadaje się do użytku jedynie w pomieszczeniach.
· Nie używaj produktu w wilgotnych warunkach.
· Nie spoglądaj bezpośrednio na diody LED. Światła LED są bardzo jasne i szkodzą oczom.
· Nie próbuj rozbierać produktu na części ani samodzielnie go naprawiać!
· Jeśli produkt nie działa prawidłowo, zawsze możesz skontaktować się z centrum serwisowym lub
innym odpowiednim ośrodkiem naprawczym.
Funkcje
Ten produkt ma na celu symulację warunków oświetleniowych zestawu kolorowego telewizora.
Jest przeznaczony wyłącznie do użytku prywatnego, a nie do użytku przemysłowego lub
komercyjnego.
Budowa urządzenia
31) Panel LED
32) Dolna obudowa
33) Wtyczka EU
34) Czujnik zmierzchowy
35) Przełącznik funkcjonalny
Instalacja urządzenia
Lokalizacja urządzenia powinna spełniać poniższe wymagani:
· Urządzenie powinno znajdować się wyłącznie w pomieszczeniu z zewnętrznymi oknami, aby
czujnik zmierzchowy wykrywał ciemność, umożliwiając aktywację urządzenia.
· Czujnik zmierzchowy możesz również włączyć w lampach ulicznych lub reflektorach
samochodowych na ruchliwej drodze.
· Urządzenie może być niewidoczne z zewnątrz.
Rzutowane światło urządzenia musi być widoczne na ścianach i suficie z zewnątrz.
Działanie
Włączanie/wyłączanie: Przełącznik funkcji znajduj się z tyłu jednostki. Dostępne są cztery pozycje.
Włączanie
Przesuń przełącznik do pozycji ON, aby włączyć Symulator TV.
INSTRUCTIONS
Włączenie po 4 lub 7 godzinach przez czujnik zmierzchowy
Urządzenie może samo się włączyć i symulować migające światło kolorowego telewizora przez 4
godziny.
Mając kontakt ze światłem, Symulator TV nie wyłączy się przed upływem 4 lub 7 godzin.
· Przesuń przełącznik do pozycji +4, aby aktywować tę funkcję.
Dwie niebieskie diody LED zaświecą się, co będzie wskazywać na tryb dostępności urządzenia.
· Przesuń przełącznik do pozycji +7, aby aktywować tę funkcję.
Trzy zielone diody LED zaświecą się, co będzie wskazywać na tryb dostępności urządzenia.
Wyłączenie
Przesuń przełącznik do pozycji OFF, aby wyłączyć Symulator TV.
Dante techniczne
Moc 2 Watt
Napięcie wejściowe 100 – 240 V~/ 50 – 60 Hz
Utylizacja
URZĄDZENIA
Nie wyrzucaj urządzenia wraz ze standardowymi odpadkami gospodarstwa domowego.
Skontaktuj się z lokalnymi władzami lub sprzedawcom, aby poznać zalecenia dotyczące
recyklingu.
Firma importowa:
Confinity NV
Dorp 16
9830 Sint-Martens-Latem
+32(0)28808755
Nr KBO: BE0897.991.257