insyabs full duplex technology for wirelessly tethered vr gear
TRANSCRIPT
Product Overview
Full-Duplex Wirelessly Tethered Communications for Virtual Reality Gear
Ahmed Bader, [email protected]
+96 654 531 6774 | +96 279 555 8008
©2016
Virtues of Wireless VR
Eliminates wires! Combines the uncontended power of tethered host-based processing with wireless mobility freedom. Allows for a fully-immersive end-user experience.
Insyab Wireless | © 20162
Pictures courtesy www.fipp.com
What is really the challenge?
Latency, latency, latency!Classical wireless communications technologies may well support high bandwidth requirement … however they suffer from inacceptable latencies that end up making users dizzy!
Insyab Wireless | © 20163
StandaloneCompact, stand-alone, fully mobile … but with compromise on VR experience due to limited processing power of the VR headset.
TetheredVR headset tethered to a powerful PC so as to tap into its processing power. However, a cable is a must so as to control latency.
Currently, the VR industry offers one of two options:
Insyab’s differentiated wireless design
• Frequency-separated full-duplex• Switching latency of less than 100µs• Channel bandwidth up to 40 MHz• RF parameters configurable over the air • Support for 2.4 and 5 GHz spectrum bands.• Full-duplex throughput up to 2x120 Mbps• Up to 20 dBm RF transmit power • 50 meters of reach indoors• Turbo decoder offers 5 – 7 dB boost in
receiver sensitivity • Low complexity design: utilizes 50 KLE
FPGA with embedded MCU
Insyab Wireless | © 20164
Supports a circular antenna array. Employs an onboard RF switching circuitry for optimized Rx-to-TX path gains.
More than 7X lower energy consumption factor (nJ/bps/Hz) compared to standards-based gear.
About Insyab
• Based in Dubai – UAE • Positioning: licensor and developer of field-proven technologies for
mission-critical and mission-specific wireless networks • Past and ongoing project:
1. Development of a smartphone add-on wireless networking module for public safety personnel.
2. Development of a battery-powered tri-band wireless M2M access point. Features a full-duplex high-speed backhaul capability.
3. A wireless mobile full-duplex repeater for coverage extension in mission-critical applications.
Insyab Wireless | © 20165
Value Proposition• Shorter time-to-market.• Competitive pricing and flexible costing models.• One-stop shop for the whole project thus eliminating risk and further reducing
NRE costs.
Team
Insyab Wireless | © 20166
Mohamed Tlich
Télécom ParisTech (PhD)
Experience: Orange R&D
Mohamed-Slim AlouiniCaltech (PhD), Georgia-Tech (MS)Faculty positions: KAUST, Texas A&M, Uni. of Minnesota
Co-Founder
Slim Souissi
Georgia-Tech (PhD)
Past: COO, Novatel Wireless
Advisor
Dev. Partner
Advisor
Zaid MasriOxford (MBA)
Experience: Capital Bank, Arab Bank Invest
Co-Founder, Managing Director
Ahmed Bader
Télécom ParisTech (PhD), OSU (MS)
Experience: Emerson (UAE),
Siemens (Germany)
Wireless technology that matters
PO Box 1961 Deira Dubai – UAE
www.Insyab-Wireless.com
Insyab Wireless | © 20167