RPS75i Intelligent Flow Technology

Adjusting Distance While Simultaneously Adjusting Flow Rate

RPS75i Intelligent Flow Technology

The traditional approach is to use the Break-up Screw to reduce the Radius

for Head to Head Coverage

While using the Break-up Screw does reduce Radius it does not reduce Flow

causing overwatering to the reduced area

The Screw also disrupts Nozzle Spray Uniformity causing uneven watering

RPS75i Intelligent Flow Technology

*

The Solution

K-Rain’s Patented Intelligent Flow TechnologyAllows You To Reduce Both

Distance And Flow Rate

RPS75i Intelligent Flow Technology

At the Same Time

*

Total Design Flexibility

Infinitely Adjustable Through All Radius and Flow Rates

Proportionately and Simultaneously

RPS75i Intelligent Flow Technology

Typical Design using Break-up Screw60’ X 60’ @40PSI

#1.5 Nozzle 38’#3 Nozzle 38’#6 Nozzle 43’Total Flow = 20.1 GPM

#1.5

#3 #6

*

(23% water savings)

Typical Design using 60’ X 60’ @ 40PSI

#1.5

#3 #6

#1.5 Nozzle 38’#3 Nozzle 38’#6 Nozzle 43’Total Flow = 20.1 GPM

#1.5 Nozzle 30’#3 Nozzle 30’#6 Nozzle 30’Total Flow = 15.4 GPM

*

Intelligent Flow Technology?

• Reduces both spray distance & water flow unlike the “Break-up Screw” which only reduces distance.

• It does so both simultaneously & proportionately.

• Zero disruption of nozzle discharge.

• Limitless reduction within nozzle performance range.

Critical placement at the nozzle Maintains water velocity and pressure which ensures nozzle performance while maintaining a uniform discharge pattern

Nozzle

Radius & Flow are reduced

simultaneously and

proportionately

4 gpm

3 gpm

40’

30’25% Reduction Example

• Zero education or buy-in because adjustment is done exactly the same as the break-up screw

• Helps maintain match precipitation

• Prevents added run times (SC) used to compensate for poor nozzle spray uniformity associated with the break-up screw

*

THANK YOU