DHIGH BAY

ORDERING INFO

Series Lumens Distribution Lens Voltage Color temperature

PTN 6000L 6,000 lumens1

12000L 12,000 lumens1

18000L 18,000 lumens1, 14

FD Focus

ND Narrow

MD Medium

WD Wide

(blank) Semi-diff use acrylic

HD125 Highly diff use acrylic

(blank) MVOLT

120 120V

208 208V

277 277V

347 347V2, 3

480 480V2, 3

LP740 67 CRI, 4000K CCT

LP750 67 CRI, 5000K CCT

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

Notes1 Nominal design lumens. Refer to

IES fi les for exact lumens based on

LM79 testing.

2 Step-down transformer utilizing

BACKPACK™. No pendant monopoint

or emergency battery pack.

3 Pending CSA Certifi cations for

18000L.

4 Available with 12,000 and 18,000

lumen packages only.

5 All cord sets are 18/3, 6’ white and

voltage specifi c. Specify voltage.

Other confi gurations available.

Consult factory.

Example: PTN 12000L ND LP750

Finish Options

(blank) Textured dark gray with aluminum accents

DBLB Textured black with aluminum accents

DWH Gloss white with aluminum accents

DLC Meets Design Lights Consortium (DLC) requirements for high bay lighting4

CS1W Straight plug, 120V5

CS3W Twist-lock, 120V5

CS11W Twist-lock, 277V5

CS93W 600V SO white cord, no plug (no voltage required)

L/SP Less surge protector

GLR Internal fast-blow fuse

BSL722 Bodine® emergency LED battery pack for 0°C and up3, 6, 7, 16

BSL722C Bodine® emergency LED battery pack for -20°C and up3, 6, 7, 16

IMP Integrated modular plug8, 9

OUTCTR Wiring leads pulled through back center of fi xture

MSE360 360° motion sensor, embedded, high bay10, 15, 17

MSE360LB 360° motion sensor, embedded, low bay10, 15, 17

MSI Aisle motion sensor, pre-wired11, 17

MSI360 360° motion sensor, pre-wired10, 16

MSI360LT 360° motion sensor, low temp. Operates down to -40°F (-40°C)11, 17

MSID Aisle motion sensor, pre-wired, high/low dimming control11, 17

MSI360D 360° motion sensor, pre-wired, high/low dimming control11, 17

NMSI nLight, aisle motion sensor, pre-wired3, 11, 17

NMSI360 nLight enabled, 360° motion sensor, pre-wired3, 11, 17

MSIPED Aisle motion sensor, photocell, pre-wired10, 17

MSI360PED 360° motion sensor, photocell, pre-wired10, 17

Accessories: Order as separate catalog number.

Mounting:12

PTNSMB DNA Surface mount bracket, natural aluminum fi nish

IBAC120 M20 10' adjustable aircraft cable; two clips; Y hanger (one pair)

IBAC240 M20 20' adjustable aircraft cable; two clips; Y hanger (one pair)

IBZPMP DNA Pendant monopoint splice box, includes side covers, natural aluminum (DNA) fi nish

IBZPMPHB DNA Pendant monopoint splice box, includes side covers (3/4" threaded hub), natural aluminum (DNA) fi nish

Cord sets and sensors for IMP option:

CS1WIMP Straight plug, 120V5

CS3WIMP Twist-lock, 120V5

CS7WIMP Straight plug, 277V5

CS11WIMP Twist-lock, 277V5

CS93WIMP 600V SO white cord, no plug (no voltage required)

MSIIMPF Aisle motion sensor9, 13

MSI360IMPF 360° motion sensor9, 13

Miscellaneous:

WGPTN12 DNA Wire guard for 6000L and 12000L, natural aluminum fi nish

WGPTN18 DNA Wire guard for 18000L, natural aluminum fi nish

INDUSTRIAL | One Lithonia Way | Conyers, GA 30012 | Phone: 800.315.4963 | www.lithonia.com ©2011-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/12 IR7330 Form No. 160.13

OTHER INDUSTRIAL PRODUCTS

I-BEAM® LED Z SERIES

LED

OTHERSOURCES

FLUORESCENT I-BEAM® IBZ

FLUORESCENT FAL

CERAMIC METAL HALIDERHMC/RHPG

INDUCTIONFIB

INTELLIGENT

ARCHWAYTM PASSAGETM

6 Requires BACKPACK™. No pendant

monopoint or 347V-480V.

7 Specify 120 or 277 only.

8 Must be factory-installed.

9 Must have “IMP”power cord to

power fi xture and/or sensor. Specify

voltage.

10 Specify voltage;120, 277 or 347 only.

11 Specify voltage; 120, 208, 277 or 480.

12 Chain mounting not recommended.

13 120V or 277V only.

14 CSA Certifi ed for 120V or 277V only.

15 Not available with 347V.

16 CSA Listed to 40°C max.

17 CSA Listed to 45°C max.

Warehouse/Manufacturing /Cold storageIndustrial Applica ons:

3

Large Indoor Spaces: Gymnasium/Conven on center/Mul -purpose

Our legacy, reputa on and commitment to innova on say it all.

Lithonia Lighting, the leader in industrial lighting, has delivered high-quality, reliable lighting

solutions for 65 years. These solutions include high intensity discharge (HID), fl uorescent, induction

and now LED sources. When properly designed, LED systems offer improved optical control, energy

effi ciency and maintenance cycles over conventional technologies.

Lithonia Ligh ng has set the new standard in high bay ligh ng with the PROTEON™ LED luminaire.

SAVES ENERGY. 50% more effi cient than HID solutions. Occupancy sensors, photocells and digital controls (nLight®) provide additional energy savings.

REDUCES MAINTENANCE COSTS. Long-life LEDs and electronics offer a predicted useful life of more than 100,000 hours (L70).

SUPPORTS MULTIPLE APPLICATIONS. Capable of effectively lighting open areas and aisles with high mounting heights and a wide range of ambient temperatures.

2

Reliable Effi cient Versa le

LED light engine provides unprecedented performance and reliability. A dedicated LED board and driver combination was engineered specifi cally for demanding high bay applications.(pgs. 8-9)

5

Additional Features:

CONTROLS FRIENDLY occupancy sensors, photocells and nLight available

THREE LUMEN PACKAGES6000, 12,000 and 18,000

FOUR OPTICAL DISTRIBUTIONS focus, narrow, medium and wide

TWO COLOR TEMPERATURES4000K and 5000K

FOUR PAINT FINISHEStextured dark gray, textured black, gloss white and gloss natural aluminum

MOUNTINGsurface, aircraft cable or pendant

PROFESSIONAL-GRADEPERFORMANCE & RELIABILITY

NAL-GRADE

Superior thermal management.Extends fi xture life and improves the performance of electrical components. (pgs. 6-7)

Highly effi cient op cal system.Minimizes glare and wasted light. Multiple refl ector and lens options optimize the light on task creating a safer, more productive environment.(pgs. 10-11)

4

Aluminum conducts heat three times

greater than steel making it the ideal

heat sink material. The PROTEON

LED fi xture uses an aluminum-

extruded housing weighing 22 lbs.

with more than 2500 square inches

of surface area. This robust heat

sink reduces the temperature of

electrical components and thermal

stress caused by frequent switching

that is common with occupancy

sensors. In addition, slots in the side

of the luminaire allow cooler air to

enter as warmer air escapes through

vents in the top of the luminaire.

THROUGH CONDUCTION AND CONVECTION heat is transferred away from temperature-sensitive components.

76

PROTEON is reliable. . . THERMAL MANAGEMENT is critically important to achieve the reliability expected from LED lighting.

Extreme temperatures, both hot and cold, are common in high bay environments and can have a negative

impact on the performance of electrical components. Using the most advanced computer modeling available,

our engineers incorporated metal only where it is most effi cient. They also used electronics that actively

respond to the environment providing optimal light output without sacrifi cing life. This fi xture intelligence

allows the PROTEON LED high bay to operate in a wide spectrum of temperatures ranging from -13°F (-25°C)

to 131°F (55°C), ensuring years of trouble-free operation.

. . . and accessible

Electrical components are securely mounted to a removable,

maintenance-friendly tray. Using pluggable connectors, this

sliding electrical tray can be disconnected from the LED

boards for quick removal.

Driver and surge protector are securely mounted to removable electrical tray.

Harnesses used extensively to connect drivers, LED boards, surge protector, sensor and primary power connection.

Dimming and emergency lighting leads located directly beneath access plate for easy location of auxiliary wires during installation.

9

LED BOARDS: High-brightness LEDs are driven at a conservative drive current (.35 max rating)

to achieve the highest lumens per watt with the least amount of heat possible.

Dynamic temperature-sensing feature continuously monitors board temperature and drive current to ensure LEDs and board components do not exceed rated temperature.

Optional emergency battery pack provides a minimum of 90 minutes of light during primary power failure.

Conformal-coated board protects electrical components from humidity and condensation.

LEEDD BBOARDS:HHHigigii h-brightness LEDs araree drivveen at a conserrvavative ddriveve current (.35 max rating) toto achieve the highest lumumens per watt with the leasst t ammount of heat possible.

DDDyynamic temperature-sensing feature continuously moonin totors board temperature andd dddrd ive current to ensure LEDs and board components do nnotot exceed rated temperrataturure.e.

OOOOptional emergency battery pack provides a minimum of 90 minutes of light ddururininggprpp imary power failure.

CConononfofoformal-coaoaaated board protects electrical components from humididityty anndd ccondensation.

PROTEON is effi cient . . .

To achieve optimal performance and reliability,

the PROTEON LED fi xture uses a custom light

engine specifi cally designed for the high-lumen

requirements of high bay lighting.

8

LED DRIVERS: Each LED driver operates with one LED board. This

allows the LED board to send signals to its unique driver to achieve peak performance.

Drivers operate from 120-277 volts standard. 347V and 480V options are available.

0-10V dimming leads are standard on each LED driver. Variable dimming range performs from 100% to 10%.

. . . and precise

ADVANCED OPTICS AND LED TECHNOLOGY produce unprecedented control of light distribution. Through the use of custom, highly effi cient refl ectors, the PROTEON LED fi xture delivers light precisely on task.

Four optical choices accommodate aisles or open spaces with mounting heights ranging from 15 to 40 feet.

Each refl ector is die-formed to ensure precise and consistent light distribution.

Refl ectors are made from premium Alanod® MIRO-SILVER®, specular aluminum with a minimum total refl ectance of 97%.

Distributions vary slightly by lumen package.

FOCUS

NARROW

MEDIUM

WIDE11

PROTEON is safe . . .

GLARE CONTROL should be considered in any lighting design to ensure the safety of those occupying the space. It is especially important in high bay applications where forklift operators or athletes must look toward the ceiling. The PROTEON LED fi xture comes standard with a semi-diffuse lens to reduce glare and LED image. For additional glare control, a highly diffuse lens is available.

10

13

. . . and increases return on

INVESTMENT

PHOTOCELL CONTROL in AREAS WITH SKYLIGHTS Take advantage of natural daylight. Using preset light levels,

photocells can step down the light level of the PROTEON fi xture or turn it off entirely. Photocells are available

standalone or integrated into the occupany sensor.

12

INTEGRATED MODULAR PLUG (IMP)

Plug-and-play functionality of the IMP option allows external

sensors and photocells to be quickly added or removed

from a PROTEON LED high bay equipped with the optional

IMP receptacle.

EMBEDDED SENSORS 360° sensor shipped integrated into PROTEON LED high bay housing. No installation necessary.

Optional factory-installed controls offer additional energy savings and can extend the life of the PROTEON LED high bay. Fixture-level controls are reliable and ship from the factory to eliminate costly fi eld installation.

PROTEON is in control . . .

ZONAL NETWORK CONTROL OVER WORK AREAS USING nLight®

PROTEON LED is available with nLight enabled controls which facilitate remote confi gurability

of the fi xture over a CAT5 wired or WIFI wireless network. Grouping fi xtures, adjusting

dim levels, scheduling operation and monitoring status are just some of the advanced features

provided with nLight enabled fi xtures.

OCCUPANCY CONTROL PER FIXTURE in AISLEWAYSOccupancy sensors commonly reduce power consumption by more than 50% in a warehouse application. PROTEON LED offers several operational sequences once vacancy is detected:

Light turns off completely

Light dims to a fi xed low level

Light initially dims then completely turns off after an additional period of vacancy

. . . and increases re

PHOTOCELL CONTROLTake advantage of natural d

photocells can step dowfi xture or turn it off

standalone or inte

nto PROTEON ation necessary.

ls offer additional energy of the PROTEON LED high liable and ship from the nstallation.

control . . .

ZONAL W

PROTEON LEcontrols whic

of the fiwireless netw

dim levels, schstatus are jus

prov

R

uce n

Legend

SkylightPROTEON fi xture with occupancy sensor and photocell

Save more than 50% in energy when compared to HID.

ENERGY SAVINGS

Design considera ons . . .

Every application is uniquely different. That is why Lithonia Lighting engineers applied their years of application knowledge to create an extremely versatile fi xture capable of serving most every application with high ceilings. To get the most from your lighting, keep in mind the following design considerations. Consult your Lithonia Lighting representative for additional assistance in choosing the right PROTEON LED fi xture for your space.

15

Notes: 1 Not recommended without the use of skylights. 2 5000K CCT recommended with skylights. 3 Recommended in gymnasiums.

Aisle occupancy sensors (bi-directional)

Photocells1

Emergency back-up

Focus distribution for aisles less than 7’ wide

Narrow distribution for aisles 7-10’ wide

Medium distribution for aisles greater than 10’ wide

4000K or 5000K CCT2

360° occupancy sensors

Photocells1

Emergency back-up

Focus or narrow distribution at mounting heights greater than 30’

Wide distribution at mounting heights less than 30’

4000K or 5000K CCT2

Embedded sensors

Wire guard3

Emergency back-up

Highly diffuse lens

Narrow distribution at mounting heights greater than 30’

Medium or wide distribution at mounting heights less than 30’

4000K CCT

Warehouse/Manufacturing/Cold Storage

Aisles Open Area

Gymnasium/Conven on Center/Large Indoor Space

FOOTCANDLE COMPARISONS

Applica on15’ high x 15’ spacing 20’ high x 20’ spacing 30’ high x 30’ spacing

175W MH PTN 6000L 250W MH PTN 12000L 400W MH PTN 18000L

Open/Multi-purpose 30 27 25 30 21 20

Aisle/Rack Storage 14 (10) 16 (8) 12 (11) 22 (11) 15 (8) 16 (8)

Assump ons: Footcandle estimates calculated are on horizontal (vertical) plane. Based on maintained lumens which refl ect average output at 40% of the useful rated lamp or LED life. Typical light industrial building refl ectances and light loss factors included in calculation.

Input Wa�s

Cost of ownership . . .

PROTEON LED high bay has a lower total

cost of ownership compared to conventional

HID high bays. The PROTEON fi xture uses less

energy to operate and is virtually maintenance

free so you can achieve a payback in only 2-4

years. This far outweighs the initial purchase

price of the fi xture. Add controls to maximize

your savings. The following charts illustrate

this payback based off of 24/7 operation and

$.10/Kwh. Maintenance costs have also been

included in the calculations at $80 per metal

halide lamp replacement.

14Notes: 1 Based off of 24/7 operation and $.10/Kwh. Maintenance costs of $80 per metal halide lamp replacement also have been included in the calculations.

1

1

PROTEON 18000L pays for itself in 4 years; 3 years with occupancy sensors.

PROTEON 12000L pays for itself in 4 years; 3 years with occupancy sensors.

PROTEON 6000L pays for itself in 2 years.