interior renovation of existing retail space and exterior...
TRANSCRIPT
APPLICATION FOR A MINOR WORKS CERTIFICATE OF APPROPRIATENESS
Return to: [email protected]
Does your pending project require a Federal or State license, permit or approval?
Name of Landmark:
Address of Landmark: 2000 South Boulevard #150, Charlotte, NC 28203
Owner’s Name:
Tax Parcel Number (s) of the Historic Landmark:
Give a brief description of the proposed work. (The description can also be submitted as a separate file) Interior renovation of existing retail space and exterior signage update. Interior renovation to include new 18” concrete infill to allow for ADA passage throughout store, new plumbing line to plumbed reference desk, new product Display millwork, new pantry, new office, new IT room. Exterior signage update to include removal of existing old tenant retail signage, and Addition of new tenant signage.
Name of Applicant:
Applicant’s Telephone Number(s):
Applicant's Email Address:
Applicant's Mailing Address: Attn: Tom Lekometros 307 W.38th Street Suite 1618 New York, NY 10018
Applicant's Signature:
Date:
Y
Atherton Mill Station
Atherton Mill (E&A), LLC
12103109
Tom Lekometros, Lawrence Group
212.764.2424
5/5/2016
Retail Tenant Fit-out, Atherton Mill, Space 85
Existing Storefront Signage
Proposed Storefront Signage
Retail Tenant Fit-out, Atherton Mill, Space 85
05/23/2016
15382
1
A101
SIM
1 THE CONSTRUCTION WORK DESCRIBED HEREIN SHALL COMPLY WITH ALLAPPLICATION FEDERAL, STATE, AND MUNICIPAL BUILDING CODES ANDREPRESENTS:A. NO CHANGE IN USEB. NO CHANGE IN OCCUPANCYC. NO CHANGE TO EXISTING CORE (STAIRS, ELEVATORS, TOILETS, ETC.)
2 EXIT LIGHTS AND SIGNS SHALL BE LOCATED AT ALL EXITS AS REQUIRED AS PERLOCAL BUILDING CODE.
3 AS PER BUILDING CODE "NOTICE OF COMMENCEMENT OF WORK." AT LEAST 24HOURS WRITTEN NOTICE SHALL BE GIVEN TO THE COMMISSIONER BEFORE ANYWORK IS COMMENCED ON ANY ITEM OF CONSTRUCTION REQUIRINGCONTROLLED INSPECTION ALL SUCH PERSONS RESPONSIBLE FOR SUCHCONTROLLED INSPECTION SHALL BE NOTIFIED IN WRITING AT LEAST 72 HOURSPRIOR TO SUCH COMMENCEMENT.
4 THESE PLANS ARE APPROVED ONLY FOR WORK INDICATED ON THEAPPLICATION SPECIFICATION SHEET. ALL OTHER MATTERS SHOWN ARE NOT TOBE RELIED UPON OR TO BE CONSIDERED AS EITHER BEING APPROVED OR INACCORDANCE WITH APPLICABLE CODES.
5 NO CHANGE IN EGRESS, OCCUPANCY OR USE IN INVOLVED UNDER THISAPPLICATION.
6 ALL INSTALLATION AND EQUIPMENT SHALL BE IN FULL ACCORDANCE WITH ALLREQUIREMENTS OF THE APPLICABLE BUILDING CODE AND ALL LOCALAMENDMENTS
7 ALL FIRE STOPPING AND DRAFT STOPPING SHALL COMPLY, AT LEAST, WITH THEMINIMUM REQUIREMENTS OF THE CONSTRUCTION CODE, FIRE STOPPING ANDDRAFT STOPPING SHALL NOT BE CONCEALED FROM VIEW UNTIL INSPECTEDAND APPROVED BY BUILDING SUB-CODE OFFICIAL.
8 ALL DEMISING WALL PENETRATIONS SHALL BE FITTED WITH APPROVED TYPE OFFIRE RESISTANCE LABELED ASSEMBLIES.
9 CONTRACTOR SHALL CHECK AND VERIFY ALL CONDITIONS AND DIMENSIONSAND REPORT ANY DISCREPANCIES TO THE ENGINEER PRIOR TO START OFWORK.
10 CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVING ALL DEBRIS FROM THESITE.
11 CONTRACTOR SHALL BE RESPONSIBLE FOR PROTECTION OF ALL EXISTINGWORK TO REMAIN.
12 ALL WORK SHALL COMPLY WITH NYS BUILDING CODE PLUS ALL OTHERAGENCIES HAVING JURISDICTION.
13 CONTRACTOR SHALL DO ALL CUTTING AND PATCHING REQUIRED.14 CONTRACTOR SHALL DO ALL SHORING AND BRACING AS MAY BE REQUIRED.15 CONTRACTOR SHALL BE RESPONSIBLE FOR RETAINING INSPECTING ENGINEER,
FILING APPLICATIONS, AND OBTAINING APPROVAL FOR ALL CONTROLLEDINSPECTIONS REQUIRED BY DEPARTMENT OF BUILDINGS AND OTHERS HAVINGJURISDICTION.
16 THE CONSTRUCTION WILL BE IN COMPLIANCE WITH AMERICANS WITHDISABILITIES ACT.
C
T
N
L
Q
R
S
FH G
M
1
A401
2
A401
A A A
D
D
D
8
A401
Sim
WiFi
S
SC
LC
T
A.F.F.14' - 2"
L3
L3
L3
L3
L3
L3
L3
L3
L3
L3
L3
L3
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L2
L7
L7
L7
L7
L7
L7
A.F.F.10' - 0"
A.F.F.10' - 0"
A.F.F.10' - 0"
A.F.F.10' - 0"CL1
TT
TT
TT
TT
TT
TT
T
TT
TT
TT
TT
T
L8AL8AL8A
TT
L10
L7
A.F.F.18' - 0"
L7
T
L8AL8A
T
T
WiFi
A.F.F.10' - 0"
T
WiFi
WiFi
S
S
S
S
SC
SCSC
SC
SC SC
SC
SC
SC
SC
SC
TC
T2 T2
T T
L2
L2
L2
L2 L2
L2
L2
L2
L2L2
L2 L2
L2L2
5
A401
Sim
L2L2
3
A401
Sim
LIGHTING FIXTURES SCHEDULE
TYPE MTG Description MANUFACTURER MODEL LAMPING WATTAGE LOAD DIMMING LOCATIONMOUNTINGHEIGHTS COMMENTS RESPONSIBILITY
GFI
GFI
GF
I
CR
LC
DC
MD
P
LC
AC
P
BA
C
MD
DC DC
CR
CR
CR
CRMD
MD
DC
HU HU
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P P
CONC-1
TL-2
VCT-1
VCT-1
VCT-1
FINISH SCHEDULE
Number Name Floor Finish BaseWall Finish
Ceiling Finish CommentsNorth East South West
2
A200
Sim
10' - 0"
9' - 1 11/32"
10' - 0"
11' - 0"
7' - 6"
GFI
Q
L
XR
N
M
S
Q
R
P
X
T
G
HF
J
K
1
A710
Sim3
A710
Sim2
A710
Sim
5
A710
Sim1
A706
Sim
2
A401
DOOR FRAMEBEYOND
DOOR CASINGBEYOND
DOORCASINGBEYOND
3/4"T. x 5 1/2"D. WOODTHRESHOLD(THRESHOLD SITSBETWEEN JAMBS,DOORSTOPS SIT ON TOP OFTHRESHOLD)
DOOR STOP
VCT FINISHFLOOR TO INSTALLWITHMANUFACTURER'SRECOMMENDEDADHESIVE
CERAMIC TILE TOINSTALL WITHMANUFACTURER'SRECOMMENDEDGROUT
LEVELINGCOMPOUND
25.00°
25.00°
5
A701
Sim3
A701
Sim
10
A703
Sim 8
A703
Sim7
A703
Sim 6
A703
Sim5
A703
Sim
3
A703
Sim
2
A703
Sim
13
A703
Sim
13
A703
Sim
13
A703
Sim
13
A703
Sim13
A703
Sim
1
A704
Sim
3
A704
Sim
30.00°
