internet telephony pbx system - planet...internet telephony pbx system and carefully unpack it. the...

Internet Telephony PBX System

(30/100/200/500 SIP Users Registrations)

IPX-330/IPX-2100/IPX-2200/IPX-2500

Quick Installation Guide

Table of Contents

1. IPX-330 ..................................................................................................... 4

1.1 Package Contents ................................................................................ 4

1.2 Hardware Installation ........................................................................... 4

1.2.1 Safety Instructions ..................................................................... 4

1.2.2 Physical Introduction .................................................................. 5

1.2.3 LED&ButtonDefinitions ............................................................. 5

1.2.4 Placement.................................................................................. 6

1.2.5 Physical Connection .................................................................... 6

1.3 BasicSystemConfiguration .................................................................. 7

1.3.1 Web Login ................................................................................. 7

1.3.2 ConfiguringtheNetworkSetting .................................................. 8

1.3.3 Changing IP Address or forgotten Admin Password ........................ 9

2. IPX-2100 ..................................................................................................10

2.1 Package Contents ...............................................................................10

2.2 Hardware Installation ..........................................................................10

2.2.1 Safety Instructions ....................................................................10

2.2.2 Physical Introduction .................................................................11

2.2.3 LED&ButtonDefinitions ............................................................11

2.2.4 Placement.................................................................................12

2.2.5 Physical Connection ...................................................................12

2.3 BasicSystemConfiguration .................................................................13

2.3.1 Web Login ................................................................................13

2.3.2 ConfiguringtheNetworkSetting .................................................14

2.3.3 Changing IP Address or Forgotten Admin Password ......................15

3. IPX-2200 ..................................................................................................16





3.2.3 LED&ButtonDefinitions ............................................................17

3.2.4 Placement.................................................................................18



3.3.1 Web Login ................................................................................19


4. IPX-2500 ..................................................................................................22





4.2.3LED&ButtonDefinitions ............................................................23

4.2.4 Placement.................................................................................24



4.3.1 Web Login ................................................................................25


5. FurtherConfiguration .................................................................................28

4

1. IPX-3301.1 Package ContentsThank you for purchasing PLANET Internet Telephony PBX system, IPX-330. ThisQuickInstallationGuidewill introducehowtofinishthebasicsettingofconnectingthe web management interface and the Internet. Open the box of the Internet Telephony PBX system and carefully unpack it. The box should contain the following items:

z IPX-330 x 1

z Quick Installation Guide x 1

z User’s Manual CD x 1

z Power Adapter x 1 (12V DC)

z RJ45 x 1

If any of the above items are damaged or missing, please contact your dealerimmediately.

1.2 Hardware InstallationThe following are instructions for setting up PLANET IPX-330. Refer to theillustration and follow the simple steps below to quickly install your Internet Telephony PBX system.

1.2.1 Safety InstructionsThe following are the safety instructions for Internet Telephony PBX system before installing.

� The maximum operating temperature of the IPX-330 is 0~40°C, which allowssufficientaircirculation.

� The connections and equipment that supply power to the IPX-330 should be capable of operating safely with the maximum power requirements of the IPX-330.Intheeventofapoweroverload,thesupplycircuitsandsupplywiringshould become hazardous.

� The power adapter must plug into the right supply voltage. Make sure that the supplied power voltage is correct and stable. If the input power voltage is over 10%lowerthanthestandard,itmaycausetheIPX-330tomalfunction.

� Generally,when installed after the final configuration, the productmust complywith the applicable safety standards and regulatory requirements of the country inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.

5

1.2.2 Physical Introduction

IPX-330


RingingReady/Act

PWR WAN 1 2 SYSLAN

Front Panel of the IPX-330

USB 2 1 Console LAN WANReset

12V DCFXO

Rear Panel of the IPX-330

1.2.3LED&ButtonDefinitions

LED definitions

Front Panel LED Status Description

PWRSteady GreenOff

PBXPowerONPBX Power OFF

SYSBlinking GreenOnOff

System is workingSystem doesn’t bootSystem fails

WANBlinking GreenOnOff

Data is transferringPBX network connection establishedWaiting for network connection

LANBlinking GreenOnOff

Data is transferringPBX network connection establishedWaiting for network connection

FXOSteady RedBlinkingOff

Ready/StandbyRingingModule not available

6

Button definitions

Button Action Description

ResetPress less than 5 secs. System reboot

Press over 6 secs. Reset to factory default

1.2.4 PlacementMake sure the device is placed in a safe environment to avoid equipment failure.

z DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.

z DO NOT obstruct ventilation slots on each side of the IPX-330 or expose it todirect sunlight or other heat sources. Be sure that there is adequate air flowaround the IPX-330.

z PlacetheIPX-330onaflatsurfacetoavoidanydamage.

1.2.5 Physical Connection

USB 2 1 Console LAN WANReset

12V DCFXO

Internet

Video Phone IP Phone IP Phone

Switch Router

ATA MobileSIP Phone

100BASE-TX UTPTelephone wire

2 x FXO

PSTN

Physical Connection Topology of the IPX-330

7

1.3 BasicSystemConfiguration1.3.1 Web LoginStep 1. Connecta computer toa LANporton the IPX-330.YourPCmustbe set

up to the same domain as 192.168.0.X of the IPX-330.

Step 2. Start a web browser. To use the user interface, you need a PC withInternetExplorer(version8orhigher),Firefox,orSafari(forMac).

Step 3. Enter the default LAN IP address of the IPX-330: 192.168.0.1 into theURL address box.

Step 4. Enter the default user name admin and the default password admin ,and then click Login to enter Web-based user interface.

(DefaultIP)Forincreasedsecurity,pleaseusehttpstoaccessIPX-330.

DefaultWANIP: https://172.16.0.1DefaultLANIP: https://192.168.0.1DefaultUserName:adminDefault Password: admin

Login page of the IPX-330

Note

For security reason, please change and memorize the new pass-word after this first setup.

Https://192.168.0.1

8

1.3.2ConfiguringtheNetworkSettingStep 1. GotoNetworkSettings Network

Network button

Network setting page

9

Step 2. EdityourWANportIPinformation.

There are three types of Ethernet port connection. They are Static IP, DHCP and PPPoE (Point-to-PointProtocoloverEthernet).Youcanfindadetailed settingprocess in the user manual.

Selection of IP Connection Type

1.3.3 Changing IP Address or forgotten Admin PasswordToresettheIPaddresstothedefaultIPaddress“192.168.0.1”(LAN)orresettheloginpasswordtodefaultvalue,presstheresetbuttononthefrontpanelformore than 6 seconds.Afterthedeviceisrebooted,youcanloginthemanagementWebinterface within the same subnet of 192.168.0.x.

Console LAN WANReset

12V DC

Reset Button

Note

Afterpressing the“Reset”button,all thesystemdatawillbe resettodefault;ifpossible,backuptheconfigfilebeforeresetting.

10

2. IPX-21002.1 Package ContentsThank you for purchasing PLANET Internet Telephony PBX system, IPX-2100.This Quick Installation Guide will introduce how to finish the basic setting ofconnecting the web management interface and the Internet. Open the box of the Internet Telephony PBX system and carefully unpack it. The box should contain the following items:

z IPX-2100 x 1



z Power Adapter x 1 (12V)

z Power Cord x 1

z RJ45 x 1

z Bracket x 2

If any of above items are damaged or missing, please contact your dealerimmediately.



� The maximum operating temperature of the IPX-2100 is 0~40°C. Care must be takentoallowsufficientaircirculation.

� The connections and equipment that supply power to the IPX-2100 should be capable of operating safely with the maximum power requirements of the IPX-2100. In the event of a power overload, the supply circuits and supplywiring should become hazardous.


11



SLOT 1

IPX-2100


RingingFXSReady/Act

FXO/GSMACTLNK

21 3 4

SLOT 2

21 3 4PWR SYS LANWAN


SLOT 2 SLOT 1

WANLANConsoleUSBReset Power

12V DC


Note

1.Supporting2slots,usercanbuyexpansionmodulelikeIPX-21FO(4 x FXO) or IPX-21GS (4 x GSM) for extending port service.

2.If IPX-21GS isused,pleasedisablepin lock function.Otherwise,dial out or call in will not be available.

2.2.3LED&ButtonDefinitionsLED definitions


PWRSteady GreenOff


SYSBlinking GreenOnOff

System is workingSystem doesn’t bootSystem fails

WANBlinking GreenOnOff

Data is transferringPBX network connection is establishedWaiting for network connection

LANBlinking GreenOnOff

Data is transferringPBX network connection is establishedWaiting for network connection

12

FXOSteady RedFlashingOff


GSMSteady RedFlashingOff

Ready/Standby (SIM card inserted)RingingNoSIMcardinsert

FXSSteady GreenFlashingOff


Button definitions

Button Action Description

ResetPress less than 5 secs. System reboot

Press over 6 secs. Reset to factory default



z DO NOT obstruct ventilation slots on each side of the IPX-2100 or expose itto direct sunlight or other heat source. Be sure that there is adequate air flowaround the IPX-2100.



SLOT 2 SLOT 1


12V DC

FXO Card Life Line Card

Internet


SwitchRouter

ATA

100BASE-TX UTPTelephone wire

MobileSIP PhoneSingal Line

TelephoneFax

PSTN

2 x FXO + 2 x FXS4 x FXO


13

2.3 BasicSystemConfiguration2.3.1 Web LoginStep 1. ConnectacomputertoaLANportontheIPX-2100.YourPCmustbeset

up to the same domain as 192.168.0.x as the IPX-2100.

Step 2. Start a web browser. To use the user interface, you need a PC withInternetExplorer(versionx8orhigher),Firefox,orSafari(forMac).

Step 3. Enter the default IP address of the IPX-2100: 192.168.0.1 into the URL address box.





Note


Https://192.168.0.1

14


Network button


15




2.3.3 Changing IP Address or Forgotten Admin PasswordToresettheIPaddresstothedefaultIPaddress“192.168.0.1”(LAN)orresetthelogin password to default value. Press the reset button on the front panel for more than6seconds.After thedevice is rebooted,youcan login themanagementWebinterface within the same subnet of 192.168.0.x.


12V DC

Reset Button

Note

Afterpressing the“Reset”button,all thesystemdatawillbe resettodefault;ifpossible,backuptheconfigfilebeforeresetting.

16


z IPX-2200 x 1



z Power Cord x 1

z RJ45 x 1

z Bracket x 2







17



SLOT 1

IPX-2200

Internet Telephony PBX SystemRinging

FXO/GSMFXS

21 3 4

SLOT 2



USB HDMI LAN

SLOT 2 SLOT 1WAN

100~240V AC


Note

1.Supporting2slots,usercanbuyexpansionmodulelikeIPX-21FO(4 x FXO) or IPX-21GS (4 x GSM) for extending port service.

2.If IPX-21GS isused,pleasedisablepin lock function.Otherwise,dial out or call in will not be available.



PWRSteady GreenOff


SYSBlinking GreenOff

System is workingSystem Booting or Failed

WANBlinking GreenOff

Data is transferringNoDataTransmitting

LANBlinking GreenOff

Data is transferringNoDataTransmitting


Channel Loading SucceedChannel RingingChannel Loading Failure

18





3.2.4 PlacementMake sure the device is placed in a safe environment to avoid equipment failure


z DO NOT obstruct ventilation slots on each side of the IPX-2200 or expose itto direct sunlight or other heat source. Be sure that there is adequate air flowaround the IPX-2200.



USB HDMI LAN

SLOT 2 SLOT 1WAN

100~240V AC

FXO Card

Internet


SwitchRouter

ATA MobileSIP Phone

4 x FXO

PSTN GSM

100BASE-TX UTP 1000BASE-T UTPTelephone wire

GSM Card


19


up to the same domain as 192.168.0.x as the IPX-2200.

Step 2. Start a web browser. To use the user interface, you need a PC withInternetExplorer(versionx8orhigher),Firefox,orSafari(forMac).

Step 3. Enter the default IP address of the IPX-2200: https://192.168.0.1 into the URL address box.





Note


Https://192.168.0.1

20


Network button


21




22


z IPX-2500 x 1



z Power Cord x 1

z RJ45 x 1

z Bracket x 2






� The power adapter must be plugged into the right supply voltage. Make sure that the supplied power voltage is correct and stable. If the input power voltage isover10%lowerthanthestandard,itmaycausetheIPX-2500tomalfunction.

� Generally,when installed after the final configuration, the productmust complywith the applicable safety standards and regulatory requirements of the country inwhichitisinstalled.Ifnecessary,consultwithtechnicalsupport.

23


SLOT 1

IPX-2500

Internet Telephony PBX SystemRinging

FXO/GSMFXS

21 3 4

SLOT 2



USB HDMI LAN

SLOT 2 SLOT 1WAN

100~240V AC


Note

Supporting 2 slots, user can buy expansionmodule like IPX-21FO(4 x FXO) or IPX-21GS (4 x GSM) for extending port service.



PWRSteady GreenOff


SYSBlinking GreenOff

System is workingSystem Booting or Failed

WANBlinking GreenOff

Data transmittingNoDataTransmitting

LANBlinking GreenOff

Data transmittingNoDataTransmitting


Channel Loading SucceededChannel RingingChannel Loading Failed





24



z DONOTobstruct ventilation slots on each side of the IPX-2500or expose it todirect sunlight or other heat sources. Be sure that there is adequate air flowaround the IPX-2500.



USB HDMI LAN

SLOT 2 SLOT 1WAN

100~240V AC

FXO Card

Internet


SwitchRouter

ATA MobileSIP Phone

4 x FXO

PSTN GSM

100BASE-TX UTP 1000BASE-T UTPTelephone wire

GSM Card


25


up to the same domain as 192.168.0.X as the IPX-2500.

Step 2. Start a web browser. To use the user interface, you need a PC withInternetExplorer(version6orhigher),Firefox,orSafari(forMac).

Step 3. Enter the default IP address of the IPX-2500: https://192.168.0.1 into the URL address box.



DefaultWANIP: 172.16.0.1DefaultLANIP: 192.168.0.1DefaultUserName:adminDefault Password: admin


Note


Https://192.168.0.1

26


Network button


27




28

5.FurtherConfigurationThankyou forpurchasingPLANETproducts. Theabove steps introduce the simpleconfigurations of the IPX-330, IPX-2100, IPX-2200 and IPX-2500. For furtherconfiguration, please refer to the user’s manual on the CD. If you have otherquestions, please contact the local dealer or distributor where you purchased this product.

You also can browse our online FAQ resource at PLANET Web site first to checkif it could solve your issue. If you needmore support information, please contactPLANETsupportteam.

PLANETonlineFAQ:http://www.planet.com.tw/en/support/faq.php

IP Telephony support team mail address :[email protected]

Copyright © PLANET Technology Corp. 2016.Contents are subject to revision without prior notice.PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

mailto:[email protected]

internet telephony pbx system - planet...internet telephony pbx system and carefully unpack it. the...

Documents