introduction and application. dopant solid solubility and sheet resistance. microscopic view point:...
DESCRIPTION
Chapter 7 Dopant Diffusion. Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion. Non-ideal and extrinsic diffusion. Dopant segregation and effect of oxidation. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/1.jpg)
1
1. Introduction and application.2. Dopant solid solubility and sheet resistance.3. Microscopic view point: diffusion equations.4. Physical basis for diffusion.5. Non-ideal and extrinsic diffusion.6. Dopant segregation and effect of oxidation.7. Manufacturing and measurement methods.
Chapter 7 Dopant Diffusion
NE 343: Microfabrication and thin film technologyInstructor: Bo Cui, ECE, University of Waterloo; http://ece.uwaterloo.ca/~bcui/Textbook: Silicon VLSI Technology by Plummer, Deal and Griffin
![Page 2: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/2.jpg)
Base Emitter Collector
p
p
n+n-p+ p+
n+ n+
BJT
p well
NMOS
Doping in MOS and bipolar junction transistors
Doping is realized by:• Diffusion from a gas, liquid or solid source, on or above surface. (no longer popular)• Ion implantation. (choice for today’s IC)• Nowadays diffusion often takes place unintentionally during damage annealing… • “Thermal budget” thus needs to be controlled to minimize this unwanted diffusion.
2
In this chapter, diffusion means two very different concepts: one is to dope the substrate from source on or above surface – the purpose is doping; one is diffusion inside the substrate – the purpose is re-distribute the dopant.
![Page 3: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/3.jpg)
Application of diffusion
In the beginning of semiconductor processing, diffusion (from gas/solid phase above surface) was the only doping process except growing doped epitaxial layers.Now, diffusion is performed to:• Obtain steep profiles after ion implantation due to concentration dependent
diffusion.• Drive-in dopant for wells (alternative: high-energy implantation), for deep p-n
junctions in power semiconductors, or to redistribute dopants homogeneously in polysilicon layers.
• Denude near-surface layer from oxygen, to nucleate and to grow oxygen precipitates.
• Getter undesired impurities.
Diffusion is the redistribution of atoms from regions of high concentration of mobile species to regions of low concentration.It occurs at all temperatures, but the diffusivity has an exponential dependence on T.
3
![Page 4: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/4.jpg)
4
Doping profile for a p-n junction
![Page 5: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/5.jpg)
5
Diffusion from gas, liquid or solid source
Pre-deposition (dose control) Drive-in (profile control)
• Silicon dioxide is used as a mask against impurity diffusion in Silicon.• The mixture of dopant species, oxygen and inert gas like nitrogen, is passed over the
wafers at order of 1000oC (900oC to 1100oC) in the diffusion furnace.• The dopant concentration in the gas stream is sufficient to reach the solid solubility
limit for the dopant species in silicon at that temperature.• The impurities can be introduced into the carrier gas from solid (evaporate), liquid
(vapor) or gas source.
![Page 6: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/6.jpg)
6
Pre-deposition
Drive-in
Comparison of ion implantation with solid/gas phase diffusion
![Page 7: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/7.jpg)
7
1. Introduction and application.2. Dopant solid solubility and sheet resistance.3. Microscopic view point: diffusion equations.4. Physical basis for diffusion.5. Non-ideal and extrinsic diffusion.6. Dopant segregation and effect of oxidation.7. Manufacturing and measurement methods.
Chapter 7 Dopant Diffusion
NE 343 Microfabrication and thin film technologyInstructor: Bo Cui, ECE, University of WaterlooTextbook: Silicon VLSI Technology by Plummer, Deal and Griffin
![Page 8: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/8.jpg)
8
Dopant solid solubility
Solid solubility: at equilibrium, the maximum concentration for an impurity before precipitation to form a separate phase.
Figure 7-4
![Page 9: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/9.jpg)
9
Solid solubility of common impurities in Silicon
![Page 10: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/10.jpg)
10
Solubility vs. electrically active dopant concentration
Not all impurities are electrically active.As has solid solubility of 21021 cm-3.But its maximum electrically active dopant concentration is only 21020 cm-3 .
V: vacancyFigure 7-5
As in substitutional site, active
Inactive
![Page 11: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/11.jpg)
11
Resistance in a MOS
For thin doping layers, it is convenient to find the resistance from sheet resistance.
Figure 7-1
![Page 12: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/12.jpg)
AlR
A
l
jS x
RR
wxj
jS x
R
Sheet resistance RS
: (bulk) resistivity xj: junction depth, or film thickness…
wlR
wl
xwxl
AlR S
jj
R=Rs when l=w (square)
Figure 7-2
![Page 13: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/13.jpg)
13
Ohm’s law:
Mobility :
By definition:
Therefore:
Finally:
Where:
EJ
pn pnq
JE
Ev
nh vnvpqJ
x
nx
x
hxnh
Evn
Evpq
Evn
Evpq
x
hxp E
v
x
nxn E
v
Important formulas
: conductivity; : resistivity; J: current density; E: electrical fieldv: velocity; q: charge; n, p: carrier concentration.
![Page 14: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/14.jpg)
14
Sheet resistance
QqNxqxxR
jjjS
111
N is carrier density, Q is total carrier per unit area, xj is junction depth
jx
Bjj
S
dxxnNxnqxx
R
0
11
For non-uniform doping:
This relation is calculated to generate the so-called Irvin’s curves. See near the end of this slide set.
![Page 15: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/15.jpg)
15
1. Introduction and application.2. Dopant solid solubility and sheet resistance.3. Microscopic view point: diffusion equations.4. Physical basis for diffusion.5. Non-ideal and extrinsic diffusion.6. Dopant segregation and effect of oxidation.7. Manufacturing and measurement methods.
Chapter 7 Dopant Diffusion
NE 343 Microfabrication and thin film technologyInstructor: Bo Cui, ECE, University of WaterlooTextbook: Silicon VLSI Technology by Plummer, Deal and Griffin
![Page 16: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/16.jpg)
16
Diffusion from a macroscopic viewpoint
Fick’s first law of diffusionF is net flux.
xtxCDtxF
,,
C is impurity concentration (number/cm3), D is diffusivity (cm2/sec).D is related to atomic hops over an energy barrier (formation and migration of mobilespecies) and is exponentially activated.Negative sign indicates that the flow is down the concentration gradient.
This is similar to other laws where cause is proportional to effect (Fourier’s law of heat flow,Ohm’s law for current flow).
Figure 7-6
![Page 17: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/17.jpg)
17
)exp(0kTE
DD ai
Intrinsic diffusivity Di
Intrinsic: impurity concentration NA, ND < ni (intrinsic carrier density).
Note that ni is quite high at typical diffusion temperatures, so "intrinsic" actually applies under many conditions. E.g. at 1000oC, ni =7.141018/cm3.
Ea: activation energy
D0(cm2/s) Ea(eV)B 1.0 3.46In 1.2 3.50P 4.70 3.68 As 9.17 3.99Sb 4.58 3.88
Figure 7-15, page 387
![Page 18: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/18.jpg)
18
A
xAtxCttxC ,,
tAtxFtxxFtAtxxFtxF ,,,,
tAtxFtxxFxAtxCttxC ,,,,
Fick’s second lawThe change in concentration in a volume element is determined by the change in fluxes in and out of the volume.Within time t, impurity number change by:
During the same period, impurity diffuses in and out of the volume by:
Therefore:
Or,
Since:
We have:
xtxF
ttxC
),(),(
xtxCDtxF
,,
xtxCD
xxtxF
ttxC ,,,
If D is constant:
2
2 ,,x
txCDttxC
Figure 7-7
![Page 19: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/19.jpg)
19
x
CI=0
C*
Cs
Cg
SiO2 Si
02
2
xCD
tC bxaC
Solution to diffusion equation
2
2 ,,x
txCDttxC
At equilibrium state, C doesn’t change with time.
Diffusion of oxidant (O2 or H2O) through SiO2 during thermal oxidation.
![Page 20: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/20.jpg)
20
Gaussian solution in an infinite medium
C0 as t 0 for x>0C as t 0 for x=0C(x,t)dx=Q (limited source)
This corresponds to, e.g. implant a very narrow peak of dopant at a particular depth, which approximates a delta function.
DtxtC
Dtx
DtQtxC
4exp,0
4exp
2,
22
Important consequences:• Dose Q remains constant• Peak concentration (at x=0) decreases as 1/ t• Diffusion distance from origin increases as 2 Dt
Figure 7-9
At t=0, delta function dopant distribution.
At t>0
![Page 21: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/21.jpg)
21
Dtx
DtQtxC
4exp,
2
Gaussian solution near a surface
A surface Gaussian diffusion can be treated as a Gaussian diffusion with dose 2Q in an infinite bulk medium.
Note: Pre-deposition by diffusion can also be replaced by a shallow implantation step.
1. Pre-deposition for dose control
2. Drive in for profile controlFigure 7-10
![Page 22: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/22.jpg)
22
DtCQDt
CCDtx
B
T
B
sj
ln2
ln2
Dt
QtCC TS
,0 txCDt
xxtxC ,2
,
B
s
j
B
x CC
xC
xtxC
j
ln2,
Gaussian solution near a surface
Surface concentration decreases with time
Concentration gradient
Junction depth At p-n junction
![Page 23: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/23.jpg)
23
Error function solution in an infinite medium
An infinite source of material in the half-plane can be considered to be made up of a sum of Gaussians. The diffused solution is also given by a sum of Gaussians, known as the error-function solution.
This corresponds to, e.g. putting a thick heavily doped epitaxial layer on a lightly doped wafer.
At t=0C=0 for x>0C=C for x<0.
dCtxC
Dtx
dDt
xDt
CtxC
Dtxxx
DtCtxC
Dtx
n
i
ii
2
2
02
1
2
exp,
2
4exp
2,
4exp
2,
DtxerfcCtxC
xerfxerfcDtxerfCtxC
dzerfz
22,
12
12
,
exp2
0
2
erfc: complementary error function
Figure 7-11
![Page 24: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/24.jpg)
24
Error function solution in an infinite medium
Evolution of erfc diffused profile
Important consequences of error function solution:• Symmetry about mid-point allows solution for constant surface concentration to be derived.• Error function solution is made up of a sum of Gaussian delta function solutions.• Dose beyond x=0 continues to increase with annealing time.
Figure 7-12
![Page 25: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/25.jpg)
25
Error function solution in an infinite mediumProperties of Error Function erf(z) and Complementary Error Function erfc(z)
xx2)(erf For x << 1
xxx
2exp1erfc
For x >> 1
00erf
1erf
x
duux0
2-exp2erf
2exp2erf xdx
xd
22
2
exp4erf xxdx
xd
x
du-uxx 2exp2erf1erfc
0
1)(erfc
dxx
10erfc
0erfc
![Page 26: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/26.jpg)
26
Boundary condition: C(x,0)=0, x0; C(0,t)=Cs; C(,t)=0
Error function solution near a surfaceConstant surface concentration at all times, corresponding to, e.g., the situation of diffusion from a gas ambient, where dopants “saturate” at the surface (solid solubility).
½
Constant 1/2
Dtx
uss dueC
DtxCtxC
2
222
erfc,
0
22
erfc DtCdxDtxCQ s
s
Pre-deposition dose
Cs is surface concentration, limited by solid solubility, which doesn’t change too fast with temperature.
![Page 27: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/27.jpg)
27
Dt tot Dii ti
Successive diffusions• Successive diffusions using different times and temperatures• Final result depends upon the total Dt product
neff tttDDt ...21
......1
221112211
DDtDtDtDtDDt eff
When D is the same (same temperature)
When diffused at different temperatures
As D increases exponentially with temperature, total diffusion (thermal budget) is mainly determined by the higher temperature processes.
For example, the profile is a Gaussian function at time t=t0, then after further diffusion for another 3t0, the final profile is still a Gaussian with t=4t0=t0+3t0.
(The Gaussian solution holds only if the Dt used to introduce the dopant is small compared with the final Dt for the drive-in i.e. if an initial /delta function approximation is reasonable)
![Page 28: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/28.jpg)
jx
Bjj
S
dxxnNxnqxx
R
0
11
Irvin’s curvesMotivation to generate Irvin’s curves: both NB (background carrier concentration), Rs (sheet resistance) and xj can be conveniently measured experimentally but not N0 (surface concentration). However, these four parameters are related by:
Irvin’s curves are plots of N0 versus (Rs, xj) for various NB, assuming erfc or half-Gaussian profile. There are four sets of curves for (n-type and p-type) and (Gaussian and erfc).
jx
j
dxxx 0
1
1-
![Page 29: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/29.jpg)
Irvin’s curves
Four sets of curves: p-type erfc, n-type erfc, p-type half-Gaussian, n-type half-GaussianExplicit relationship between: N0, xj, NB and RS.
Once any three parameters are know, the fourth one can be determined.
Figure 7-17
1-
![Page 30: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/30.jpg)
30
ExampleDesign a boron diffusion process (say for the well or tub of a CMOS process) such that s=900/square, xj=3m, with CB=11015/cm3.
From (half-Gaussian) Irvin’s curve, we findCs << solubility of B in Si, so it is correct to assume pre-deposition (here by ion implantation) plus drive-in, which indeed gives a Gaussian profile.
The average conductivity of the layer is
![Page 31: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/31.jpg)
31
Dtx
DtQtxC
4exp,
2
29
15
17
242
cm107.3
10104ln4
103
ln4
B
s
j
CC
xDt
Dtx
CC jsB 4exp
2
Example (cont.)
hours8.6seccm105.1
cm107.3213
29
indrive
t
213917 cm103.4107.3104 DtCQ s
Assume drive-in at 1100oC, then D=1.5×10-13cm2/s.
Pre-deposition dose
![Page 32: Introduction and application. Dopant solid solubility and sheet resistance. Microscopic view point: diffusion equations. Physical basis for diffusion](https://reader035.vdocument.in/reader035/viewer/2022070501/56816938550346895de09bd7/html5/thumbnails/32.jpg)
32
DtCQ s2
sec5.5102.4105.22
103.415
2
20
13
deppre
t
9indrive
14deppre 107.3103.2
DtDt
Now if we assume pre-deposition by diffusion from a gas or solid phase at 950oC, solid solubility of B in Si is Cs=2.5×1020/cm3, and D=4.2×10-15cm2/s.The profile of this pre-deposition is erfc function.
However, the pre-deposition time is too short for real processing, so ion-implantation is more realistic for pre-deposition.
Example (cont.)