introduction w1
TRANSCRIPT
-
8/12/2019 Introduction W1
1/27
Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic
circuits Faradays Law lectromagnetic Force Motor action
Generator action Types and parts of machines
1
-
8/12/2019 Introduction W1
2/27
1. Definition
Electric machines are energy conversion devicesthat convert electrical energy to mechanical energyand vice versa through the medium of magneticfield. An electric machine is called a generatorwhenit is used to convert mechanical energy to electrical
energy. On the contrary, when an electric machine isoperated to convert electrical energy to mechanicalenergy, it is called a motor.
2. Application of MachinesElectric motors are used to operate washingmachines, elevators, cranes etc while electricgenerators are used to generate electricity for powergeneration and alternator for charging car battery.
2
-
8/12/2019 Introduction W1
3/27
3
Applications of Machines
-
8/12/2019 Introduction W1
4/27
4
Applications of Machines
-
8/12/2019 Introduction W1
5/27
-
8/12/2019 Introduction W1
6/27
6
Electromagnetism
Magnetic fields are the fundamental mechanism by whichenergy is conserved from one form to another in motors,
generators and transformers.
A magnetic field is a condition resulting from electriccharges in motion. For convenience in visualization and
analysis, magnetic fields are represented on diagrams by
close loops. Theses loops, called magnetic flux lines
-
8/12/2019 Introduction W1
7/277
Magnetic Circuit
Magnetic circuit showing an arrangement offerromagnetic materials (core) that forms the path and
guide the magnetic flux.
The flux always takes the shortest path
-
8/12/2019 Introduction W1
8/278
Megnetomotive force
It is the driving force that causes the magnetic filed to
appear in a magnetic circuit.
Flux Density
Its a measure of the concentration of lines of flux in
a particular section of magnetic circuit
Magnetic Field Intensity
It is the mmf per unit length of the magnetic circuit and it
may vary from point to point throughout the circuit.
-
8/12/2019 Introduction W1
9/279
Its a measure of the opposition the magnetic circuit
offers to the flux.
Reluctance
The reluctance of a magnetic circuit is related to itslength, cross sectional area, and permeability.
-
8/12/2019 Introduction W1
10/2710
Relative permeability and magnetization curves
Relative permeability is the ratio of the permeabilityof a material to the permeability of free space. It is
very useful for comparing the magnetizability of
different magnetic materials whose relative
permeabilities are known.
-
8/12/2019 Introduction W1
11/2711
The ratio =B/H is called magnetic permeability and
has different values for different magnetic materials.
-
8/12/2019 Introduction W1
12/2712
Analogies between Electric and
Magnetic Circuits
The relationship between mmf, flux, and reluctance in a
magnetic circuit is an analog of the relationship bwteen emf,
current and resistance respectively, in an electric circuit.
-
8/12/2019 Introduction W1
13/27
-
8/12/2019 Introduction W1
14/27
14
Magnetic Circuit and its Electrical Analog
A ferromagnetic core is shown in figure below . The depth of
the core is 5 cm. The other dimensions of the core are as
shown in the figure. Find the value of the current that will
produce a flux of 0.005 Wb. With this current, what is the flux
density at the top of the core? What is the flux density at the
right side of the core? Assume that the relative permeability ofthe core is 1000.
-
8/12/2019 Introduction W1
15/27
-
8/12/2019 Introduction W1
16/27
16
-
8/12/2019 Introduction W1
17/27
17
Magnetic Hysteresis and hysteresis losses
Hysteresis means lagging behind. In magnetic hysteresis,
flux density B lags behind the field intensity H
Hysteresis loop shows the characteristics of magneticmaterial. It is obtained by plotting values of flux density
B for periodically reversing field intensity
-
8/12/2019 Introduction W1
18/27
Magnetic Field play an important role in
electric machines.
Magnetic fields are produced when current
flows in coils of wire. Magnetic fields have 2 funtions:
- produce torque for motor operation
- generate voltage for generator
operation
18
-
8/12/2019 Introduction W1
19/27
dt
Nd
dt
dNe
19
If a conductor is moved by an external force, D in a magneticfield, an electromagnetic force is produced between the two ends
of the conductor. This is the basis for the operation of a
generator.
According to Faradays Law, a magnetic field will induce avoltage, e in a coil. This forms the basis for the operation of a
generator. The voltage, e is given by,
N Number of turns of each coil
Magnetic flux (Weber)
-
8/12/2019 Introduction W1
20/27
-
8/12/2019 Introduction W1
21/27
21
Michael Faraday showed that passing a current through aconductor freely suspended in a fixed magnetic field creates a
force which causes the conductor to move through the field.
The force created by the current, now known as the Lorentz force,
acts between the current conductor and the magnetic field, or the
magnet creating the field.The magnitude of the force acting on the
conductor is given by:
F = BLI where Fis the force on the conductor, Lis the length of
the conductor and Iis the current flowing through the conductor
-
8/12/2019 Introduction W1
22/27
22
Faraday also showed that the converse is true -
moving a conductor through a magnetic field, or
moving the magnetic field relative to the conductor,
causes a current to flow in the conductor.
The magnitude of the EMF generated in this way is
given by:
E = BLvwhere Eis the generator EMF (orback EMFin a
motor) and vis the velocity of the conductor through
the field
-
8/12/2019 Introduction W1
23/27
23
In practice, both the motor and the generator effects take place at
the same time.
Passing the current through a conductor in the magnetic field
causes the conductor to move through the field but once the
conductor starts moving it becomes a generator creating a currentthrough the conductor in the opposite direction to the applied
current. Thus the motion of the conductor creates a "back EMF"
which opposes the applied EMF.
Conversely moving the conductor through the field causes a current
to flow through the conductor which in turn creates a force on the
conductor opposing the applied force.
-
8/12/2019 Introduction W1
24/27
24
-
8/12/2019 Introduction W1
25/27
25
-
8/12/2019 Introduction W1
26/27
1. 3 types of rotat ing m achines:
- Synchronous AC Machines
- Asynch ronous Machines or Induc t ionMachines
- DC Mach ines
26
-
8/12/2019 Introduction W1
27/27