ipanel intelligent assistant system - extroncnc.com · ipanel intelligent assistant system extron...
TRANSCRIPT
YIH CHUAN MACHINERYINDUSTRY CO., LTD
YIH CHUAN MACHINERY( JIAXING ) INDUSTRY CO., LTD
EXTRONCNC.com
HEAD QUARTERS40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, TaiwanTel : +886-4-2359-3351Fax : +886-4-2359-0012E-mail : [email protected]
CHINA BRANCH314031 No.3198, Zhongshan West Rd., Xiuzhou Industrial Area, Jiaxing, ZhejiangTel : +86-573-8279-9488Fax : +86-573-8279-7299E-mail : [email protected]
Copyright © EXTRON All rights reservedE-IAS-ENG-201811
IASiPanel I ntel l igent Assistant System
iPanel Intelligent Assistant System
EXTRON CNC is the professional manufacturer which focus on buildiing machining center.
In 2018 we successfully developed super-convenient operation-software to support
users. The software is designed by conversational editing, easy for operator to manage
the controller program. Through “ Online help ” guideline, no matter junior or senior
operators, everyone could save preparation time easily & enhance the total machining
efficiency. The software also provides the “ trouble-shooting guidelines ”. While alarm
message is coming out, the operator could follow the instruction to solve the problem. In
the meanwhile, lower down the machine's idle time & enhance the machining efficiency.
If alarm continuously happens, please call the local agent directly. In conclusion, all these
functions simplify the machining processes and make the job fast & safe.
All-purpose functions to make work easier, fast and safe.
IAS
Coordinate Setup
Peripheral Equipments
System Setting
Diagnostic Functions
Calculator Type
Magazine Management
Process Parameters
Contact Information
SP. Thermal Compensation
Load Management
Workpiece Measurement
Machining Programs
Manual Documents
Time Based Maintenance
Remote Functions
Tool Length Measurement
Process Counter
I n c r e a s e t h e s p e e d a n d convenience to users looking for centering.
2 Points Center
Parameters Mode Selection
I n p u t t h e m e a s u re d ball diameter D value to measure 2 points and calculate the X / Y angular coordinates.
Plane Measurement
Parameter Adjustment &
Storage
• 2 Points Center
• 3 Points Center
• 4 Points Center
• Rectangular Measurement
• Plane Measurement
• 4 Sides Coordinate ( HMC )
• Restore Factory Parameters
• Parameter Adjustment &
Storage
• Parameters Mode Selection
• Import Process Parameters
Face Milling 1 & 2
• Face Milling
• Rectangle Pocket
• Longitudinal Slot
• Matrix Drilling
• Matrix Boring
• Circular Tapping
• Engraving
• Circul Pocket
• Circular Boss
• Rectangular Boss
• Matrix Tapping
• Circular Drilling
• Circular Boring
D i s p l a y s p i n d l e t o o l / prepared tool pot number and prepared tool number / set big tools.
Input parameters and coordinates, to easily f u l f i l t h e p l a n e y o u want to mill.
After the tool magazine returns h o m e , t o o l n u m b e r s a r e reorganized.
The load monitoring value of each tool can be input. When the actual load exceeds the setting value, the alarm comes up by system.
Size Tools
Magazine Reset
Magazine Service
Tool Monitor
• Size Tools
• Magazine Service
• Tool Data
• Magazine Reset
• Tool Monitor
For parts, saving machining time.
For mold, focusing on the workpiece precision.
Average speed and average performance.
Optimal speed
Optimal Accuracy
Average efficiency
The first 24 tools can be selected at random by the big / small tool button, which can automatically change the adjacent tools of the big tools into empty tools or restore, eliminating the complicated setting process of the big tools.
Display signals of magazine /
arm / spindle status.
Spindle maintenance:
tool clamping / unclamping /
spindle positioning.
Magazine clockwise /
counterclookwise
pot up / down.
Arm clockwise / counter-
clockwise.
For protecting the spindle, it stops right away when tools wear and break.
OPT.
M achinin g Programs Generator
M agazine M anage m ent
Process Para m eters
Coordinate Setup
Store the program and o p t i m a l p a r a m e t e r s of each workpiece to quick restore at any time.
01
02
03
04
Display signals of magazine /
arm / spindle status.
Enable NC settings directly a f t e r m a n u a l t o o l l e n g t h measurement.
Convenient for operators to calculate data. P r o v i d e m o r e
a d v a n c e d a n d convenient tools to c a l c u l a t e d a t a f o r workers.
To be activated along w i t h R e n i s h a w T S 27 tool meusrement system ( optional ).
Automatic Tool Length Setting
Feed Rate Calculator
• Manual Tool Length Setting
• Tool Offset Setting
• Automatic
Tool Length Setting
3-Axis Load Monitor 3-Axis Load Record
Engineering Calculator
• 3-Axis Load Monitor
• 3-Axis Load Record
• Spindle Load Monitor
• Spindle Load Record
• 4/5th-Axis Load Monitor
• 4/5th-Axis Load Record
• Simple Calculator
• Engineering Calculator
• Feed Rate Calculator
• Speed Calculator
Calculater Type
To be activated along with renishaw OMP 40 / 60 workpiece measurment system ( optional ).
After manually measuring the tool, directly enable tool length the corresponding to tool table for users, so as to avoid collision by wrong input.
4/5th-Axis Load Monitor
Spindel Load Monitor
OPT.
OPT.
IAS
Tool Len gth m easure m ent
Work piece M easure m ent
Load Management
Automatically measure the position of the workpiece and offset it to the workpiece coordinate.
05
06
07
08
Manual Tool Length Setting
D i s p l a y m a c h i n e a b n o r m a l m e s s a g e s and troubleshooting m e t h o d s , a n d t h e photo with location in the electrical cabinet to check.
Complete I / O and PMC related signal descriptrons help service people to s l o v e p r o b l e m s quickly in no time.
S t a t i s t i c s f o r t h e p ro c e s s u t i l i z a t i o n r a t e o f a c e r t a i n p e r i o d o r a s i n g l e w o r k p i e c e o n t h e m a c h i n e f o r managers' referance.
Alarm Messages &
Trouble shooting
Process Counter 1~3 Process Utilization Rate
Process Co u nter
D i a g n o s t i c Functions
OPT.
• Process Counter 1
• Process Counter 2
• Process Counter 3
• Process Total Counter
• Process Daily Counter
• Process Utilization Rate
• 4th Axis
• 5th Axis
• Linear Scales
• Tool Length Measurement
• Workpiece Measurement
• Mechanical Input
• Panel Input
• Alarm List
• T List
• Alarm Messages
• Mechanical Output
• Panel Output
• Warning List
• K List
• Rigid Retract
M a c h i n e r u n n i n g t i m e / o p e r a t i n g t i m e / s p i n d l e running time / number of jobs / number of tool changes in the statistical setting cycle.
PMC Parameter list
Spindle Thermal Compensation
Offset the machining coordinates according to the spindle speed / spindle temperature / machine temperature for smooth finish of the workpiece.
Must buy [ Temperature Meter ] and [ Temperature Sensor ] at extra charge as option.
09
10
11 Time Based Maintenance
Peripheral Equipments
Calculate dates needed to be maintained, as well as related text /picture descriptions.
12
13 Contact Information 15
Provide local agent information for instant contact.
Manual Documents M Code ListG Code List
• G Code List
• M Code List
• Machine Catalogues
• Electrical Parts List
• Panel Manuals
16
Machine Catalogues Panel Manuals
Process File Transfer
Alarm Message Notification
Remote Functions
P r o v i d e u s e r s t o monitor the operating status by IAS from the PC side.
When an alarm occurs on the machine, the notification can be sent by setting the e-mail, and the machine status can be instantly mastered even if not by the side of the machine.
A P C c a n t r a n s fe r d i f fe re n t m a c h i n i n g p r o g r a m s t o m u l t i p l e m a c h i n e s , o r t h e m a c h i n i n g p r o g r a m s f r o m multiple machines can transfer b a c k t o a P C f o r u n i f i e d management.
IAS Monitor• Alarm Message Notification
• Process File Transfer
• IAS Monitor
17
Transmission interface can be selected, RS232/CF CARD/DATA SERVO /USB.
Set the buzzer to enable or disable sounds while an alarm o c c u r s o r a p r o g r a m e n d s . How long does it sound? Set O means continuous sound.
A p p r o p r i a t e f u n c t i o n a l p e r m i s s i o n s c a n b e o p e n t o c h a r a c t e r s a c c o r d i n g t o d i f f e r e n t j o b s s u c h a s : Machining programing editors ( User administrator )and loading / unloading workers ( general operators ) etc.
Syste m S ettin g
Buzzer Control
IO Channel Setting
Permission Setting
• Permission Setting
• IO Channel Setting
• Buzzer Control
• System Information
• Engineering Mode
18
D i s p l a y c o n t r o l l e r , i Pa n e l a n d m a c h i n e re lated information.I P a d d r e s s c a n b e set up by the user ' s e n v i r o n m e n t i o n i n iPanel to easily access or transfer programs and alarm notification.
System Information