iphone debugging cable - do it yourself - or die trying
DESCRIPTION
This is a short presentation that shows you, what pieces you should buy for assembling an iPhone debugging cable, how much they cost and how you correctly assemble them.TRANSCRIPT
Stefan Horst <[email protected]>
iPhone Debugging Cable do it yourself - or die trying
http://www.sektioneins.de
Stefan Horst • Debug Cable • Juni 2013
What is needed?
• PodBreakout (12 EUR)
• for before v1.5 pinout is switched top to bottom
• FTDI Cable (17 EUR)
• USB Cable (1 EUR)
• 470kΩ Resistor (0.05 EUR)
2
Stefan Horst • Debug Cable • Juni 2013
Start with the FTDI cable
• solder the wires to this pins:
• RX -> pin 12
• TX -> pin 13
• GND -> pin 11
3
RX
(yel
low
)
TX (o
rang
e)
GN
D (b
lack
)
Stefan Horst • Debug Cable • Juni 2013
USB Cable next
• USB Connections:
• GND -> pin 16
• Power -> pin 23
• Data - -> pin 25
• Data + -> pin 27
4G
ND
(bla
ck)
Pow
er (r
ed)
Dat
a - (
whi
te)
Dat
a +
(gre
en)
Stefan Horst • Debug Cable • Juni 2013
Resistor Connection
• 470kΩ Resistor connection:
• pin 1 -> pin 21
5
Stefan Horst • Debug Cable • Juni 2013
Finished Product
6