is there one machine to replace manual plaster the wall?
TRANSCRIPT
SSINCOLA® --SRM MMODEL
SINCOLA® -SRM AUTOMATIC RENDERING MACHINE
ZHENGZHOU SINCOLA MACHINERY CO.,LTD.
No.18, Dongfeng Road,Zhengzhou City,China.
Zhengzhou Sincola Machinery Co., Ltd. is a high-technology, modern enterprise established in 2009, professionally engaged in the R&D and manufacturing of auto render machine. We have 100 staffs full-time, more than 10 people with middle and senior titles and technical, building area of 9000 square meters.
Automatic rendering plastering wall machine is widely used in residential, office buildings, factories, schools, such as rural self-built housing wall plaster work, reduces the labor intensity of workers, plastering greatly improve the rendering efficiency, shorten the construction cycle, are exported to eastern Europe, the Middle East, southeast Asia, central Asia, South Asia, Africa, the Americas, Oceania more than 30 countries and regions.
Zhengzhou Sincola Machinery Co.,Ltd.
Add:No.18 Dongfeng Road, Zhengzhou Henan, China
Email:[email protected] Tel:+86-371-56053450 Fax:+86-371-86253575 Web:www.shotcretemanufacturer.comSkype: [email protected] Whatsapp , Viber , Line ,Mob: +8615515526967 Name: Jacky
AUTOMATIC RENDERING MACHINE
the machine can be made into full stainless steel
Model SRM7 ( Recommend) SRM4 SRM5-1 SRM5-1.2 SRM6Rendering Height(m) 3.5 3.5 3.5 3.5 3.5
Rendering Width(mm) 1000 OR 1200 800 800 OR 1000 1200 1000Rendering Speed(m²/h) 70-80 60-70 80-90 90-110 80-90
Rendering Thickness(mm) 5-30
Power1.5KW/380V/220V-50HZ/60
HZ0.75KW/380V/220V-50HZ/60H
Z2.2KW/380V/220V-50HZ/60H
Z2.2KW/380V/220V-50HZ/60HZ 1.1KW/380V/220V-50HZ/60
HZElectricity Phase Single/Three Single/Three Single/Three Single/Three Single/Three
Dimension(mm)1000*650*5501200*650*550
800×650×5501000×650×550
800×800×5001000×800×500
1200×800×500 1000×650×550
Weight(Kg) 180 120 130 160 140Usage Brick Wall, Block Wall, Indoor
Suitable Materials 1.Cement Mortar ,2.Ready Mix Mortar,3.Gypsum Mortar ,4.Lime Mortar
Feature
No Need to Mark the Reference Point. One
Higher Quality of Flatness. Limit Lever.
Increase 30% the Volume of the Mortar
Tank. Stretched Plate of the Overhead Beam
Shift machine conveniently when pass
door or concrete beams of ceiling no need to
disassemble directional pipes.
New alluminium alloy main unit and stainless steel directional pipes.
Original gear rack driving system enable output of
main power is morepeaceful and stable Less
failure rate.
Higher productivity,bigGerworking area.new alluminium alloy main unit and stainless steel directional pipes. Original gear rack driving system enable output of main power is more peaceful and stable less failure rate.
No Need to Mark the Reference Point. One
Quality of Flatness. Limit Lever. Increase 30% the Volume of the Mortar
Tank. Stretched Plate of the Overhead Beam
Product Development
First generation SRM1 The first generation close beta test product at 2008.
Second generation, SRM1-1 Preliminary listed at 2009, after 16 months it development into shape.
Third generation, SRM 2, belt feeding time to market in 2010, the shape of this model is too large improved later.
Fourth generation, SRM4 steel wire rope climbing, after two years, the first generation of hopper feeding way went public in 2012.
Fifth generation, SRM5 pole climbing, improved the instability in the process of steel wire rope climbing. Went public in 2013, after years of user testing, this machine is
more stable. Width: 800mm,1000mm,1200mm
Sixth generation, SRM6 the machine improved the problem that 20 cm at the bottom of the wall can t rendered. Machine first time improved to not need person to
make points on wall, use laser positioning. Width: 1000mm,1200mm
Seventh Generation, SRM7 the machine use laser positioning, no need person to make points on wall. It is the upgrade products of five generation, simple to
operate. At present, the product is relatively stable during all the machines.
SRM7 LASER POSITIONING AUTOMATIC RENDERING MACHINE SRM6 LASER POSITIONING AUTOMATIC RENDERING MACHINE
SRM5 AUTOMATIC RENDERING MACHINE SRM5-1.2 AUTOMATIC RENDERING MACHINE
SRM4 AUTOMATIC RENDERING MACHINE SRM2 AUTOMATIC RENDERING MACHINE
AUTOMATIC RENDERING MACHINE AND ALL PARTS TOOLBOX
SRM6 and SRM7 generation laser positioning equipment.
Main EngineGreen Box
Protective GlassesLine Capturing
StrapCharger
Instruction Book
Using semiconductor green laser with wavelength of 635
nm the laser line is clear and bright.
LASER POSITIONING DEVICE LASER POSITIONING DEVICE
Machine Position Calibration
Waterproof Main Motor Assembly
Machine Stick Up Rod Assembly
Bottom of the Machine Assembly
Machine to Be Installed
Machine Render Plate to Be Installed
Machine Accessories
Nylon wheel Gear shaft Screw Chain for Coupling
Small nylon wheel Brush Tubing Gear
Adjust handle Directional wheel Hydraulic pedal Pole
Square tube Square tube processing Square tube Calibration Parts storage area
Machine Main Motor Waterproof
WANSHSIN Motor , IP55 Protection Class Aluminum Alloy Shell Waterproof and Damp Proof
Class F Insulation Galvanized Screw Anti-pendant Automatic Braking Deceleration Machine
Seal Couplings Low Noise
WANSHSIN Motor features is aluminum alloy shell of the motor, helical gear precision grinding, unique waterproof and damp proof design, motor IP55 protection class, Class F insulation, low noise, long life, geared motor has obtained ISO9002 certification, CE certification, UL.
Asynchronous Vibration Motor 220V 240V 380V 400V 415V Aluminum Alloy Shell, Pure Copper Coils.
Asynchronous Waterproof Vibration Motor, get many national patents.
WEIPU Wiring Protection Switch Waterproofing Grade IP44 CE Certificate
Triangle Ground Bus Plugs Triangle Grounding Line Plug 6 Meters Long Wires
Machine Electrical Panel Protector Component
Electrical Accessories Box DEFU Electric Appliance CE Certification
Insertion and Extraction Switch Ground Connection Insertion and Extraction Switch
Machine Electric Equipment
Precision Measurement Qualified Inspection before Leave Factory Scale Measuring
Machine Wooden Case X1
Accessories Wooden Cases
X1
Machine Size(SRM)
Main Engine Wooden Case Size(mm)
Main Engine Wooden Case Gross Weight(kg)
Main Engine Wooden Case Volume(m3)
Accessories Box Size(mm) Weight(kg) Volume(m3)
800 820x900x860 120 0.63 2440x250x250 60 0.31000 1020x900x860 140 0.78 2440x250x250 60 0.31200 1220x900x860 180 0.94 2440x250x250 60 0.3
Machine Outer packing
ExportFumigation-free Wooden Cases
Motors and Electrical Certificates
Certificate of Motor Certificate of Qualification
Certificate of Motor CE Certificate of Electric Appliance
Shipping documents
B/L CO OR FE
SASO Insurance
CE ISO
VIDEO
ZHENGZHOU SINCOAL YOUTUBE SRM7 VIDEO HD
http://youtu.be/o0isIOacMpA
Zhengzhou Sincola Machinery Co.,Ltd.
Zhengzhou China.
SRM AUTOMATIC RENDERING MACHINE
TEL:+8637156053450 FAX:+8686263575
EMAIL:[email protected]
Website: http://www.shotcretemanufacturer.com