iso 9001-2000 by pass load diverter - series...
TRANSCRIPT
Consult the Lorenz Sales Team for further product information or visit: www.lorenzproducts.com the conveying products people
By Pass Load Diverter - Series “F” For Pneumatic Conveying Systems Applications
• Stainless steel construction standard - optional carbon steel & aluminum• Lightweight aluminum frame, corrosion resistant
• Positive blade lock (PBL) between blade and cylinder rod • Active compression seals (ACS) • Internal magnetic piston cushioned air cylinder
• Stacking design for multiple conveying lines• Rated for 82° (180°F) • Base is sold separately
Standard Features
(Dilute phase up to 15 psig max.)
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca57
Standard Features• Stainless steel material contact points
• Lightweight aluminum frame, corrosion resistant• Positive blade lock (PBL) between blade and cylinder rod
• Active compression seals (ACS)• Internal magnetic piston cushioned air cylinder
• Stacking design for multiple conveying lines• Rated for 82oC (180oF)
Pneumatic actuated diverter valve for vacuum or
low pressure* conveying systems.
Fills hoppers via cyclonic separation in the inlet load tube and
exhausting air in the outlet tube.Valves can be stacked on top of each other
allowing multiple sources to multiple hoppers.
Available in sizes 2” to 8”.
By Pass Load DiverterSeries “F”
For Pneumatic Conveying Systems Applications
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca57
Standard Features• Stainless steel material contact points
• Lightweight aluminum frame, corrosion resistant• Positive blade lock (PBL) between blade and cylinder rod
• Active compression seals (ACS)• Internal magnetic piston cushioned air cylinder
• Stacking design for multiple conveying lines• Rated for 82oC (180oF)
Pneumatic actuated diverter valve for vacuum or
low pressure* conveying systems.
Fills hoppers via cyclonic separation in the inlet load tube and
exhausting air in the outlet tube.Valves can be stacked on top of each other
allowing multiple sources to multiple hoppers.
Available in sizes 2” to 8”.
By Pass Load DiverterSeries “F”
For Pneumatic Conveying Systems Applications
56
Canada 1-800-263-1942 | USA 1-800-263-7782 | [email protected] An ISO 9001-2008 Registered Company
By Pass Load Diverter - Series “F”
Top View
57