isvm pro and lite install guide - orion...

iSVM Pro and Lite Install Guide

- 0 -

ORION TECHNOLOGY A/S


Orion Technology A/S

01/June/2017

Installations Guide For Body Worn Cameras Management Software.


- 1 -

Contents Contents .................................................................................................................................................... - 1 - 1. Document change history ...................................................................................................................... - 2 - 2. Set up condition ..................................................................................................................................... - 3 - 3. Install iSVM PRO ................................................................................................................................... - 3 -

3.1 Installation .................................................................................................................................... - 3 - 3.1.1 Check before installation .................................................................................................... - 3 - 3.1.2 Installation .......................................................................................................................... - 4 -

3.2 Main setup .................................................................................................................................... - 4 - 3.2.1 Server management........................................................................................................... - 4 - 3.2.2 Setup .................................................................................................................................. - 5 -

3.3 Device Registration ...................................................................................................................... - 6 - 3.4 Live ............................................................................................................................................... - 7 - 3.5 Backup.......................................................................................................................................... - 7 - 3.6 Playback ....................................................................................................................................... - 8 - 3.7 Install FTP server ......................................................................................................................... - 9 -

4. Install iSVM Lite ................................................................................................................................... - 10 - 5. Caution ................................................................................................................................................ - 11 -

5.1 iSVM ........................................................................................................................................... - 11 - 5.2 iSVM trouble or cautions - We will improve the following troubles. ............................................ - 12 -


- 2 -

1. Document change history

Version Change history date Writer

0.01 Drafting 2016.09.12 Bae Jung Hoon

0.02 Add Lite and FTP settings 2017.02.03 Orion

0.03 Update server recommendation 2017.03.01 Orion

0.04 Small changes 2017.05.01 Orion

0.05 Small changes 2017.06.01 Orion


- 3 -

2. Set up condition Make the local network for test. (In case of WAN condition, we need to add relay server, thus we don't recommend to test at WAN condition in this time.)

- AP: Access point(wire or wireless).

- OR-200W: Connect to iSVM Pro via WiFi.

- iSVM Pro: Connect to AP with wired network and connect to OR-200W.

- Charger Dock: Connect to iSVM Pro with USB cable.

-

3. Install iSVM PRO

3.1 Installation

3.1.1 Check before installation

Min. Specification

Computer Rights Requires Local Administrator rights or Administrator rights to run Safely

Operating System Microsoft Windows 7 Starter and Service Pack 1 Microsoft Windows 7 (32/ 64 bit*) Home Basic and SP1 Microsoft Windows 7 (32/ 64 bit*) Home Premium and SP1 Microsoft Windows 7 (32/ 64 bit*) Professional and SP1 Microsoft Windows 7 (32/ 64 bit*) Ultimate and SP1 Microsoft Windows 8 (32/ 64 bit*) Microsoft Windows 8 (32/ 64 bit*) PRO Microsoft Windows 10 (32/ 64 bit*) Home, PRO, Enterprise or Education * Running as a 32 bit application.

Windows X86 or X64 (Browsers must be in 32-bit mode) Internet explorer should be over 10 Intel Core i5 - 1.6GHz or higher processor Free 512MB RAM (min. 4GB recommended)

Network Ethernet, 100 Mbit/s

Graphics Adapter AGP or PCI-Express, minimum 1024×768 (1920×1080 recommended), 16 bit colors.

Hard Disk Space Minimum 100 MB free (for program).

- Check the storage is enough for back up.

- Download programs from www.orion-technology.eu

BWC 1 BWC 2 BWC Cn

AP

Wi-Fi

iSVM Pro Charger Dock

USB MSC


- 4 -

3.1.2 Installation

- Execute the package, and install iSVM Pro.

- Reboot the PC, To be sure that all 3 programs are running.

- Check iSVMSvc.exe, iSVMMnt.exe, iSVMBackup.exe automatically excute when start Windows.

<Normal process image>

3.2 Main setup

3.2.1 Server management

- Excute iSVM Pro.

- Make the first user. ID Password Name

- Configure Server IP and Port at "Server Management" menu. (This is for iSVM Pro) o IP address: iSVM Pro server IP should be same as PC which is installed iSVM Pro. o Port: We recommend 80, but you can use a specific port which not use in the LAN.

Click Apply

- Select drive where Movies have to be saved to. o Eg. G: and use 90%

Click save.


- 5 -

3.2.2 Setup

Select Firmware upgrade setting, either Auto or Passive. If Auto is select there have to be a File in "FW file set". Auto is Automatic upgrade BWC with new firmware Passive Update manual, by selecting a BWC and upgrade on Device State page.


- 6 -

3.3 Device Registration

- Connect OR-200W to PC with USB. (If you use Charging dock, the device S/N will be showed as USB drive name.)

- Configure the following information at "Device State" menu, and click "Add". o Group: Group name. o Name: Device (BWC) name. o S/N: You can check S/N on the label of OR-200W. o ID: ADMIN o Password: 12345 o SSID: AP's WiFi SSID o Net p/w : AP's WiFi password o DHCP: OFF o IP: OR-200W IP Address (It should be same IP network with iSVM Pro) o Gateway: OR-200W - Default Gateway o Netmask: OR-200W - subnet mask

- After registration, window of “Added” will be pop-up.

- Disconnect USB between OR-200W and PC.

- “Fail. Device not connecting to computer” -> If there is this message, please check the connection of USB between SWC to PC. If OR-200W is well connected, but the message still shows, please reboot the PC.


- 7 -

3.4 Live

- Turn on OR-200W, if OR-200W is turn off.

- After turn on, OR-200W “Station” icon will blink and try to connect to AP and iSVM.

- After success to connect, “Station” icon will be on, not blinking.

- Switch on for recording.

- Please check the "live at Live view menu" when the connection display of iSVM Pro is green.

3.5 Backup

- Switch off for recording. The recording will be stop.

- Connect OR-200W to iSVM Pro with USB.

- Check if OR-200W is detected as USB Mode icon.

- Check the route of detected USB Drive of OR-200W (S[Serial Number])\NORMAL\(Sub folder)\. After backup to PC(iSVM), all recording files will be removed automatically.

<On going Back up>


- 8 -

<Completed back up>

- After backup the device will upgrade with new firmware.

- It will reboot to complete the firmware upgrade it takes some minutes.

3.6 Playback

- Click "Timeline" and "date" of Playback menu of iSVM.

- Check the OR-200W which you want to playback in Device List.

- Click Play button.

- Click what date and time you want to see.

Fast Backward Full Screen

Pause View Selection

Play Digital Zoom in

Fast Forward Digital Zoom Out

Backward speed Find BWC Posistion

Speed Camera movement road

Forward Speed


- 9 -

3.7 Install FTP server

- Download Filezilla program on below link. https://filezilla-project.org/download.php?type=server

- Install the FTP server program.

- Execute FTP server.

- Click "Connect" as default condition.

- Add user in Menu - EDIT - Users - General

- Add ISVM_LITE folder in MENU - EDIT - Users - Shared folder. (C:\\ISVM_LITE) *** The folder name should be ISVM_LITE

- Activate Files and Directories check boxes. (Read, Write, Delete, Append)

- Click on “Set as Home”

- Check Computer Firewall setting and make sure FTP is open.

https://filezilla-project.org/download.php?type=server


- 10 -

4. Install iSVM Lite

- Install FTP Server program - Pre-condition: Install FTP Server to PC which is installed iSVM Pro. (See “Install FTP server”)

- Execute iSVM Lite. Registration window which configuration of connecting information of iSVM Pro shall be displayed.

- Start iSVM Lite

- Click "Connect" button after input the connecting information of iSVM Pro. It shall be changed to uploading window.

o iSVMPro IP: IP address of iSVM Pro o iSVMPro Port: Port number of iSVM Pro o FTP Port: FTP port number of iSVM Pro o FTP ID: User ID of iSVM Pro o FTP Password: User Password of iSVM Pro"

- In case connection fails to iSVM Pro, warning window shall be pop up.

BWC 1

LAN or WAN or Internet

iSVM Pro Charger Dock

USB MSC

iSVM Lite


- 11 -

- Then you connect Device (BWC) to PC which has installed iSVM Lite there will come a “On uploading window”, Device information will be displayed and start to upload video data to FTP server.

o Serial: Device serial number o F/W: Device firmware version o SD: Status of SD card Storage of Device

- In case Device is not registred to iSVM Pro, Device shall not be detected by iSVM Lite.

- In case of data transfer fail, warning message shall be pop up. Video data of Device shall be formatted after complete uploading.

5. Caution

5.1 iSVM

- iSVM is automatically being excuted with administrator mode. If there is pop-up of upgrade to administrator, please click "OK".


- 12 -

- Please keep the HDD storage of the PC.

5.2 ICON on BWC firmware 1.0.4.5.

No. OLED ICON STATUS DESCRIPTION

1 Recognizing

Recognizing if SWC200 is

connected to PC(MSC) or

Dock.

2 StanbySWC200 is connected to PC

and stanby.

3 Assess

PC is having access to the data

in SWC200 (Such as recording

data backup, firmware copy

and etc)

4 Poor connection

Connection to PC is not good

or threre are some changes in

connection to PC

5 Disconnected

SWC200 is in USB mode but it

is disconnected to PC and not

recoveriable.

6 Fail to certificationFail to user certification from

iSVM

isvm pro and lite install guide - orion...

Documents