jansons institute of technology

Jansons Institute of Technology Department of Mechanical Engineering

Program Outcome Attainment for 2015-19 Batch

PO – CO Matrix

Course No.

Course Code

Course Name Program Outcomes

1 2 3 4 5 6 7 8 9 10 11 12

SEMESTER-I

THEORY

C101 HS6151 Technical English – I - 1 - 1 - 2 1 1 2 3 1 3

C102 MA6151 Mathematics – I 2 3 - - - - - - 2 - - 2

C103 PH6151 Engineering Physics – I 3 2 2 1 - - - - - - 1 1

C104 CY6151 Engineering Chemistry – I 3 - - - - 2 - - - - - 2

C105 GE6151 Computer Programming 2 1 2 3 1 - - - - - - 1

C106 GE6152 Engineering Graphics 3 3 2 2 1 3 - 2 2 3 2 3

PRACTICAL

C107 GE6161 Computer Practices Laboratory 3 3 3 - - - - 1 2 2 - 1

C108 GE6162 Engineering Practices Laboratory 2 1 3 2 1 2 1 2 - 1 - 2

C109 GE6163 Physics and Chemistry Laboratory - I 3 2 - 1 1 - - - 1 - - 2

SEMESTER-II

THEORY

C201 HS6251 Technical English – II 2 2 1 3 1 3 2 2 2 2 3 3

C202 MA6251 Mathematics – II 2 3 - - - - - - 2 - - 2

C203 PH6251 Engineering Physics – II 3 2 1 1 - - - - - - 1 1

C204 CY6251 Engineering Chemistry – II 3 - - - - 2 - - - - - 2

C205 GE6252 Basic Electrical and Electronics Engineering 3 1 1 - - - - - - - 1 1

C206 GE6253 Engineering Mechanics 3 2 3 2 - 2 - 3 - - 2 2

PRACTICAL

C207 GE6261 Computer Aided Drafting and Modeling Lab 3 2 3 2 3 2 - 2 2 3 2 3

C208 GE6262 Physics and Chemistry Laboratory -II 3 2 - 1 1 - - - 1 - - 2

SEMESTER-III

THEORY

C301 MA6351 Transforms and Partial Differential Equations 2 3 - - 2 - - - - - - 1

C302 CE6402 Strength of Materials 3 2 3 2 - 2 2 2 - - 2 2

C303 ME6301 Engineering Thermodynamics 3 3 2 2 2 3 2 2 2 2 2 2

C304 CE6451 Fluid Mechanics and Machinery 3 3 3 2 2 3 2 2 - 2 - 3

C305 ME6302 Manufacturing Technology - I 3 2 1 1 2 2 2 1 1 3 1 1

C306 EE6351 Electrical Drives and Controls 3 2 2 2 2 - - - - - - 2

PRACTICAL

C307 ME6311 Manufacturing Technology Laboratory - I 2 - 2 2 - 2 2 3 2 2 2 2

C308 CE6461 Fluid Mechanics and Machinery Laboratory 3 2 2 - 2 2 3 - 2 2 2 2

C309 EE6365 Electrical Engineering Laboratory 3 3 1 1 1 1 - - - - 1 1

SEMESTER-IV

THEORY

C401 MA6452 Statistics and Numerical Methods 2 3 - - - - - - - - - 2

C402 ME6401 Kinematics of Machinery 3 3 3 2 2 2 2 3 1 2 - 2

C403 ME6402 Manufacturing Technology– II 3 2 2 - 2 1 1 1 2 2 2 2

C404 ME6403 Engineering Materials and Metallurgy 3 2 2 2 1 1 2 2 - 1 1 3

C405 GE6351 Environmental Science and Engineering 3 - - - - 2 3 3 2 - - 3

C406 ME6404 Thermal Engineering 3 2 2 2 2 3 2 2 2 2 2 2

PRACTICAL

C407 ME6411 Manufacturing Technology Laboratory - I 3 2 3 - 2 2 2 - 2 - - 2

C408 ME6412 Fluid Mechanics and Machinery Laboratory 3 2 2 2 3 2 2 2 2 2 2 2

C409 CE6411 Electrical Engineering Laboratory 3 2 2 3 - - 1 1 2 - - 2

SEMESTER-V

THEORY

C501 ME6501 Computer Aided Design 3 3 3 2 3 2 1 2 2 3 1 3

C502 ME6502 Heat and Mass Transfer 3 2 2 3 2 3 2 2 2 2 2 2

C503 ME6503 Design of Machine Elements 3 3 3 2 - 2 2 2 - 2 2 2

C504 ME6504 Metrology and Measurements 2 2 2 2 2 3 2 2 2 2 2 2

C505 ME6505 Dynamics of Machines 3 2 2 2 - 2 2 2 - - 2 2

C506 GE6075 Professional Ethics in Engineering 3 2 2 2 - 3 3 3 2 1 - 1

PRACTICAL

C507 ME6511 Dynamics Laboratory 3 3 3 3 2 2 2 2 2 2 3 2

C508 ME6512 Thermal Engineering Laboratory-II 3 2 3 2 3 2 2 3 2 2 2 2

C509 ME6513 Metrology and Measurements Laboratory 3 2 2 2 1 1 - 3 3 2 1 3

SEMESTER-VI

THEORY

C601 ME6601 Design of Transmission Systems 3 3 3 3 - 2 - 2 2 2 - 3

C602 MG6851 Principles of Management 2 2 - - 2 3 2 3 2 2 2 2

C603 ME6602 Automobile Engineering 3 2 2 2 2 3 3 2 - 2 1 3

C604 ME6603 Finite Element Analysis 3 3 2 3 2 2 - 2 1 3 2 3

C605 ME6604 Gas Dynamics and Jet Propulsion 2 3 1 3 2 2 2 2 2 2 - 2

C606 ME6004 Un Conventional Machining Process 3 3 2 2 2 1 2 - 2 2 2 2

PRACTICAL

C607 ME6611 C.A.D. / C.A.M. Laboratory 3 2 3 2 3 2 - 2 2 3 2 3

C608 ME6612 Design and Fabrication Project 3 3 3 3 2 2 2 2 2 2 2 2

C609 GE6563 Communication Skills - Laboratory Based - 2 - - 2 - - 1 3 3 - -

SEMESTER-VII

THEORY

C701 ME6701 Power Plant Engineering 3 3 2 2 2 3 2 2 2 2 1 2

C702 ME6702 Mechatronics 3 2 2 3 3 2 1 2 - 2 - 2

C703 ME6703 Computer Integrated Manufacture System 3 2 2 - 2 2 1 3 2 2 2 2

C704 GE6757 Total Quality Management 2 2 2 2 1 2 1 1 2 2 3 2

C705 ME6008 Welding Technology 3 3 2 2 1 2 1 2 1 - 2 2

C706 ME6021 Hydraulics and Pneumatics 2 2 2 2 2 2 2 2 2 2 1 2

PRACTICAL

C707 ME6711 Simulation and Analysis Laboratory 3 2 3 2 3 2 2 2 3 2 3

C708 ME6712 Mechatronics Laboratory 3 3 2 3 3 3 3 3 3 3 1 3

C709 ME6713 Comprehension 2 2 2 1 1 1 2 2 3 2 2

SEMESTER-VIII

THEORY

C801 MG6863 Engineering Economics 2 2 2 2 2 2 2 2 2 2 2 2

C802 MG6071 Entrepreneurship Development 1 2 2 2 1 3 2 3 2 2 2 2

C803 ME6018 Additive Manufacturing 2 2 2 2 3 2 2 2 2 - 2 3

PRACTICAL

C804 ME6811 Project Work 3 3 3 3 2 2 2 2 2 2 2 2

PSO – CO Planned

Course No.

Course Code

Course Name Program Specific Outcomes

PSO1 PSO2 PSO3

SEMESTER I

THEORY

C101 HS6151 Technical English – I 2 1 2

C102 MA6151 Mathematics – I - - 2

C103 PH6151 Engineering Physics – I 3 2 2

C104 CY6151 Engineering Chemistry – I 3 2 2

C105 GE6151 Computer Programming 3 - 2

C106 GE6152 Engineering Graphics 3 - 2

PRACTICAL

C107 GE6161 Computer Practices Laboratory 1 - 2

C108 GE6162 Engineering Practices Laboratory 3 2 2

C109 GE6163 Physics and Chemistry Laboratory - I 3 2 2

SEMESTER II

THEORY

C201

HS6251 Technical English – II 2 1 2

C202 MA6251 Mathematics – II - - 2

C203 PH6251 Engineering Physics – II 3 2 2

C204 CY6251 Engineering Chemistry – II 3 2 2

C205 GE6252 Basic Electrical and Electronics Engineering 1 - 1

C206 GE6253 Engineering Mechanics 3 2 2

PRACTICAL

C207 GE6261 Computer Aided Drafting and Modeling Laboratory

3 2 2

C208 GE6262 Physics and Chemistry Laboratory -II 3 2 2

SEMESTER III

THEORY

C301 MA6351 Transforms and Partial Differential Equations 2 2 2

C302 CE6402 Strength of Materials 3 1 2

C303 ME6301 Engineering Thermodynamics 2 2 2

C304 CE6451 Fluid Mechanics and Machinery 2 - 2

C305 ME6302 Manufacturing Technology - I 3 2 1

C306 EE6351 Electrical Drives and Controls 1 1 2

PRACTICAL

C307 ME6311 Manufacturing Technology Laboratory - I 3 2 2

C308 CE6461 Fluid Mechanics and Machinery Laboratory 3 2 2

C309 EE6365 Electrical Engineering Laboratory 1 - 1

SEMESTER IV

THEORY

C401 MA6452 Statistics and Numerical Methods 3 2 2

C402 ME6401 Kinematics of Machinery 3 - 2

C403 ME6402 Manufacturing Technology– II 3 2 1

C404 ME6403 Engineering Materials and Metallurgy 2 3 3

C405 GE6351 Environmental Science and Engineering - 2 3

C406 ME6404 Thermal Engineering 2 2 2

PRACTICAL

C407 ME6411 Manufacturing Technology Laboratory - I 3 - 2

C408 ME6412 Fluid Mechanics and Machinery Laboratory 2 2 1

C409 CE6411 Electrical Engineering Laboratory 2 2 2

SEMESTER V

THEORY

C501 ME6501 Computer Aided Design 3 2 2

C502 ME6502 Heat and Mass Transfer 2 2 2

C503 ME6503 Design of Machine Elements 1 2 2

C504 ME6504 Metrology and Measurements 2 2 1

C505 ME6505 Dynamics of Machines 2 2 1

C506 GE6075 Professional Ethics in Engineering 3 2 2

PRACTICAL

C507 ME6511 Dynamics Laboratory 2 2 3

C508 ME6512 Thermal Engineering Laboratory-II 2 2 2

C509 ME6513 Metrology and Measurements Laboratory 3 3 2

SEMESTER VI

THEORY

C601 ME6601 Design of Transmission Systems 2 2 1

C602 MG6851 Principles of Management 3 1 2

C603 ME6602 Automobile Engineering 3 2 2

C604 ME6603 Finite Element Analysis 3 - 2

C605 ME6604 Gas Dynamics and Jet Propulsion 2 2 2

C606

ME6004 Un Conventional Machining Process 3 3 2

PRACTICAL

C607 ME6611 C.A.D. / C.A.M. Laboratory 3 2 2

C608 ME6612 Design and Fabrication Project 3 2 2

C609 GE6563 Communication Skills - Laboratory Based 3 1 2

SEMESTER VII

THEORY

C701 ME6701 Power Plant Engineering 2 2 1

C702 ME6702 Mechatronics 2 1 2

C703 ME6703 Computer Integrated Manufacture System 2 - 2

C704 GE6757 Total Quality Management 1 1 2

C705 ME6008 Welding Technology 3 2 2

C706 ME6021 Hydraulics and Pneumatics 1 2 1

PRACTICAL

C707 ME6711 Simulation and Analysis Laboratory 3 2 2

C708 ME6712 Mechatronics Laboratory 3 3 2

C709 ME6713 Comprehension 1 1 1

SEMESTER VIII

THEORY

C801 MG6863 Engineering Economics 2 2 2

C802 MG6071 Entrepreneurship Development 2 2 3

C803 ME6018 Additive Manufacturing 2 2 2

PRACTICAL

C804 ME6811 Project Work 3 2 2

PO Direct Attainment

Direct Course Assessment

Direct attainment of PO is measured in the scale of 0 - 3 level.

Internal Assessment

Students assessed based on different activities such as MCQ, Assignment, Tutorials, Quiz Puzzles, etc.,.

Internal Examination question papers are defined with CO for each question. On completion of Internal

Assessment (IA), marks scored by the students CO wise are averaged up. CO attainment is calculated by

considering 90% of IA test level and 10% of activities level. CO attainment is met which is based on the students

achieving the defined target.

External Evaluation

Since end semester University examination evaluation is not available CO wise, total mark is considered for CO

Attainment. CO attainment is calculated based on the students achieving the defined target.

Direct attainment of CO is calculated by considering 60% of university Examination level and 40% of IA Level.

PO Direct Attainment

Course No.

Course Code


1 2 3 4 5 6 7 8 9 10 11 12

SEMESTER-I

THEORY




C104 CY6151 Engineering Chemistry – I 3 - - - - 3 - - - - - 3

C105 GE6151 Computer Programming 3 2 3 3 2 - - - - - 2


PRACTICAL


C108 GE6162 Engineering Practices Laboratory 3 3 3 3 3 3 3 3 3 - 3

C109 GE6163 Physics and Chemistry Laboratory - I 3 3 - 3 3 - - - 3 - - 3

SEMESTER-II

THEORY

C201 HS6251 Technical English – II - 3 - 3 - 3 3 3 3 3 3 3




C205 GE6252 Basic Electrical & Electronics Engineering 3 2 3 3 2 - - - - - - 2

C206 GE6253 Engineering Mechanics 3 3 3 3 2 3 - 3 3 3 3 3

PRACTICAL

C207 GE6261 Computer Aided Drafting and Modeling Lab 3 3 3 3 3 3 - 3 3 3 3 3

C208 GE6262 Physics and Chemistry Laboratory -II 3 3 - 3 3 - - - 3 - - 3

SEMESTER-III

THEORY

C301 MA6351 Transforms & Partial Differential Equations 3 3 - - 2 - - - - - 2



C304 CE6451 Fluid Mechanics and Machinery 3 3 3 3 3 3 3 3 - 3 - 3



PRACTICAL


C308 CE6461 Fluid Mechanics and Machinery Lab 3 3 3 3 3 3 - 3 3 3 3


SEMESTER-IV

THEORY



C403 ME6402 Manufacturing Technology– II 2 2 2 1 2 2 2 2 2 2 2 2

C404 ME6403 Engineering Materials and Metallurgy 2 2 2 2 1 1 2 2 1 1 1 2



PRACTICAL


C408 ME6412 Fluid Mechanics and Machinery Lab 3 3 3 3 3 3 3 3 3 3 3 3


SEMESTER-V

THEORY







PRACTICAL



C509 ME6513 Metrology and Measurements Laboratory 3 3 3 3 3 3 - 3 3 3 3 3

SEMESTER-VI

THEORY




C604 ME6603 Finite Element Analysis 2 2 2 2 2 2 2 2 2 2 2



PRACTICAL




SEMESTER-VII

THEORY







PRACTICAL

C707 ME6711 Simulation and Analysis Laboratory 3 3 3 3 3 3 - 3 3 3 3 3


C709 ME6713 Comprehension 3 3 3 3 - 3 3 3 3 3 3 3

SEMESTER-VIII

THEORY




PRACTICAL

C804 ME6811 Project Work 3 3 3 3 3 3 3 3 3 3 3 3

PSO Direct Attainment

Course No.

Course Code


PSO1 PSO2 PSO3

SEMESTER I

THEORY


C102 MA6151 Mathematics – I - - 2



C105 GE6151 Computer Programming 3 - -


PRACTICAL

C107 GE6161 Computer Practices Laboratory 3 - -



SEMESTER II

THEORY

C201 HS6251 Technical English – II 3 3 3

C202 MA6251 Mathematics – II - - 2



C205 GE6252 Basic Electrical & Electronics Engineering 2 - -

C206 GE6253 Engineering Mechanics 3 3 -

PRACTICAL

C207 GE6261 Computer Aided Drafting and Modeling Lab 3 3 3


SEMESTER III

THEORY

C301 MA6351 Transforms and Partial Differential Equations 2 2 -

C302 CE6402 Strength of Materials 3 2 -


C304 CE6451 Fluid Mechanics and Machinery 3 - 3


C306 EE6351 Electrical Drives and Controls 2 2 -

PRACTICAL


C308 CE6461 Fluid Mechanics and Machinery Laboratory 3 3 -


SEMESTER IV

THEORY

C401 MA6452 Statistics and Numerical Methods 3 3 -




C405 GE6351 Environmental Science and Engineering - 3 -


PRACTICAL



C409 CE6411 Electrical Engineering Laboratory 3 3 -

SEMESTER V

THEORY







PRACTICAL




SEMESTER VI

THEORY






C606 ME6004 Un Conventional Machining Process 3 3 3

PRACTICAL



C609 GE6563 Communication Skills - Laboratory Based 3 3 -

SEMESTER VII

THEORY





C705 ME6008 Welding Technology 3 3


PRACTICAL




SEMESTER VIII

THEORY




PRACTICAL


Indirect Course Assessment:

Course end survey and exit surveys are carried out, where students give feedback in the scale of 1 to 5, are summed up in the proportion of

80:20 respectively.

PO Indirect Attainment

Course No.

Course Code


1 2 3 4 5 6 7 8 9 10 11 12

SEMESTER-I

THEORY




C104 CY6151 Engineering Chemistry – I 3 - - - 2 - - - - - 2

C105 GE6151 Computer Programming 2 2 2 3 2 - - - - - - 2


PRACTICAL


C108 GE6162 Engineering Practices Laboratory 2 2 3 2 2 2 2 2 - 2 - 2

C109 GE6163 Physics & Chemistry Laboratory - I 3 2 - 2 2 - - - 2 - - 2

SEMESTER-II

THEORY

C201 HS6251 Technical English – II 2 2 2 3 2 3 2 2 2 3 3 3




C205 GE6252 Basic Electrical &Electronics Engg. 3 2 2 - - - - - - - 2 2

C206 GE6253 Engineering Mechanics 3 2 3 2 - 2 - 3 - - 2 2

PRACTICAL

C207 GE6261 Computer Aided Drafting & Modeling Lab 3 2 3 2 3 2 - 2 2 3 2 3

C208 GE6262 Physics & Chemistry Laboratory -II 3 2 - 2 2 - - - 2 - - 2

SEMESTER-III

THEORY

C301 MA6351 Transforms & Partial Differential Equations 3 3 - - 2 - - - - - - 2



C304 CE6451 Fluid Mechanics and Machinery 3 3 3 2 2 3 2 2 2 3



PRACTICAL


C308 CE6461 Fluid Mechanics and Machinery Lab 3 3 3 - 2 2 3 - 2 3 2 2


SEMESTER-IV

THEORY



C403 ME6402 Manufacturing Technology– II 3 2 2 1 2 2 1 2 2 2 2 2

C404 ME6403 Engineering Materials and Metallurgy 3 2 2 2 2 2 2 2 1 2 2 3



PRACTICAL


C408 ME6412 Fluid Mechanics and Machinery Lab 3 2 2 2 3 2 2 2 2 2 2 2


SEMESTER-V

THEORY







PRACTICAL



C509 ME6513 Metrology and Measurements Laboratory 3 2 2 2 2 2 1 3 3 2 2 3

SEMESTER-VI

THEORY




C604 ME6603 Finite Element Analysis 3 3 2 3 2 2 - 2 2 3 2 3



PRACTICAL




SEMESTER-VII

THEORY







PRACTICAL

C707 ME6711 Simulation and Analysis Laboratory 3 2 3 2 3 2 - 2 2 3 2 3


C709 ME6713 Comprehension 2 2 2 2 - 2 2 2 2 3 2 2

SEMESTER-VIII

THEORY




PRACTICAL

C804 ME6811 Project Work 3 3 3 3 2 2 2 2 2 2 2 2

PSO Indirect Attainment

Course No.

Course Code


PSO1 PSO2 PSO3

SEMESTER I

THEORY


C102 MA6151 Mathematics – I - - -



C105 GE6151 Computer Programming 3 - -


PRACTICAL

C107 GE6161 Computer Practices Laboratory 2 - -



SEMESTER II

THEORY

C201 HS6251 Technical English – II 2 2 2

C202 MA6251 Mathematics – II - - -



C205 GE6252 Basic Electrical and Electronics Engineering 2 - -

C206 GE6253 Engineering Mechanics 3 2 -

PRACTICAL

C207 GE6261 Computer Aided Drafting and Modeling Lab 3 2 2


SEMESTER III

THEORY

C301 MA6351 Transforms and Partial Differential Equations 2 2 -

C302 CE6402 Strength of Materials 3 2 -


C304 CE6451 Fluid Mechanics and Machinery 2 2


C306 EE6351 Electrical Drives and Controls 2 2

PRACTICAL


C308 CE6461 Fluid Mechanics and Machinery Laboratory 3 2 -


SEMESTER IV

THEORY

C401 MA6452 Statistics and Numerical Methods 3 2 -




C405 GE6351 Environmental Science and Engineering - 2 -


PRACTICAL



C409 CE6411 Electrical Engineering Laboratory 2 2 -

SEMESTER V

THEORY







PRACTICAL




SEMESTER VI

THEORY






C606

ME6004 Un Conventional Machining Process 3 3 2

PRACTICAL



C609 GE6563 Communication Skills - Laboratory Based 3 2 -

SEMESTER VII

THEORY





C705 ME6008 Welding Technology 3 2 -


PRACTICAL




SEMESTER VIII

THEORY




PRACTICAL


Final course wise PO and PSO Attainment

For attainment calculation, Average of Direct CO - PO attainment data from CO - PO correlation matrix is

collected for all courses and Indirect Course Assessment are summed up in the proportion of 80:20 respectively.

Program Outcomes (Course wise Attainment Level)

1 2 3 4 5 6 7 8 9 10 11 12

PO Direct Attainment Level

3 3 3 3 3 3 3 3 3 3 3 3

PO Indirect Attainment Level

3 2 2 2 2 2 2 2 2 2 2 2

Average Attainment Level

3 3 3 3 3 3 3 3 3 3 2 3

Program Specific Outcomes (Course wise Attainment Level)

1 2 3

PO Direct Attainment Level

3 3 3

PO Indirect Attainment Level

3 2 2

Average Attainment Level

3 3 3

Indirect Method for PO and PSO Attainment: Program Exit Survey collected from students who are going to

graduate at the end of the eighth semester.

Final Attainment for PO PSO Attainment: Sum of Final course wise PO and PSO Attainment and Indirect

Method for PO and PSO Attainment in the proportion of 80:20 respectively.

If PO and PSO attainment level is measured on a scale of 0-3, where 0 being low and 3 being high level of

attainment.

Program Outcomes (Program Attainment Level)

1 2 3 4 5 6 7 8 9 10 11 12

Indirect attainment from Program Exit Survey

3 3 3 3 3 3 3 3 3 3 3 3

Program Attainment Level

3 3 3 3 3 3 3 3 3 3 2 3

Program Specific Outcomes (Program Attainment Level)

1 2 3

Indirect attainment from Program Exit Survey

3 3 3

Program Attainment Level 3 3 3

If PO-PSO attainment level is below 3, then PO attainment is not strongly attained, recommendations are defined

for forthcoming batches for improvement.

Recommendations for Improvement (For Forthcoming Batches):

Case studies and Innovation teaching methods are incorporated in regular academic activities and the

students encourage to participate in innovation competition for strengthening the PO11.

jansons institute of technology

Documents