ENOTEK BULLETIN

On 28th January 2021, there was Boots onGround - Management audit sessionconducted by Mr Bahtiar and Mr Nazrul Afiqfrom HSSE Department at Shell NTI SLEEast, under NTI Program.

The audit start with PH from EnotekEngineering Sdn Bhd Mr Mohammad Ainbriefed all the visitor about the siteinformation, emergency response plan,work activities and related hazard of theday. The audit conducted at work area ofexecution work to monitor and evaluate theHSSE compliances as per Shell, Meinhardtand Enotek requirements.

At the end of the audit, all the finding,recommendation, and challenges facedduring the project execution was discussedto ensure project run smoothly without anyissue or incident.

Health Safety Security Environmental & Quality Control

January 2021

POOR ISOLATION

HOUSEKEEPING

ELECTRICAL

7

5

3

11,194 536NMPIAUDITHOURS

HSSE – 5

PROJECT – 1

QAQC - 0

11,194

YTD

6HSSE – 5

PROJECT – 1

QAQC - 053

YTD YTD

JANUARY 2021ENOTEK BULLETIN

Site safety supervisor initially brief the WAH application and requirements at Shell NTI Jalan Kapar

12 LSR (R) TRAININGTRAINING PROGRAMS ,

12 LSR & SCAFFOLDING ERECTION COACHINGCOACHING PROGRAMS - SHELL NTI JLN KAPAR

Reflect to WAH stand down from

CBRE, Enotek SH NTI Jalan Kapar site

team triggered to educate and coach site

worker especially to frontliner who are

eligible to do WAH that been trained on

WAH previously. It is to ensure no repeated

mistake or unsafe condition/unsafe act been

occurred at this site as per shared by CBRE.

This coaching session are more to, on how

to erect and dismantle and meaning of

scaffold tagging. Chronology and sequence

of related 12 Life Saving Rules been

elaborated and share to worker which is to

focus on wearing full body harness when working at 1.8m

height. 3 categories of fall factor and recommended

method on how to hook full body harness been share, to

ensure if worker fell, low impact and not been hit by others

object due to pendulum effect.

At the end of the sharing session, presenter from HSSE

personnel had conducted Q&A session, and re-train worker

on all 12 LSR based on execution work at site. Next, all

attendees are understood the input from the coaching

session and can relate to execution work at site.

JANUARY 2021ENOTEK BULLETIN

On January 2021, Shell NTI SLE

East had conducted Blueboard

Gamification Session to site workers.

Pictorial and gamification concept been

use to increase knowledge and capability

of worker on managing hazards from

related activity, preventive barrier,

recovery barrier and consequences. It is

to ensure worker get clear picture and are

capable to relate the preventive and

recovery barrier during execution. At the

end of session, worker understand and

enjoy the way of coaching with using Blue

Board.

Site safety supervisor initially brief the blue board concept to worker at Shell NTI SLE East

BLUEBOARD GAMIFICATION SESSIONCOACHING PROGRAMS - SHELL SLE JOHOR

HIERARCHY OF FALL PROTECTIONSAFETY CORNER,

1 2 3 4 5HAZARD

ELIMINATION

FALL RESTRAINT

SYSTEM

PASSIVE FALL

PROTECTION

FALL ARREST

SYSTEM

ADMINISTRATIVE

CONTROL

Preferred

solution is to

eliminate the fall

hazard

Physical barriers,

like guardrails

around

unprotected edge

Use PPE to

restrict workers

range of

movement

Design for

situation where

exposure to a fall

is not

preventable

Least preferred

solution is work

procedure that

increase a worker

awareness of fall

hazard

JANUARY 2021ENOTEK BULLETIN

Quality

FORMWORK DEFINATION

Formwork is the term used for the process of creating a

temporary mold into which concrete is poured and formed.

FORMWORK SPECIFICATION

The formwork sides must be capable of resisting the hydrostatic

pressure of the wet concrete which will diminish to zero within several

hours depending on the rate of setting and curing. The formwork base

or soffit must be capable of resisting the initial dead load of the

wet concrete and the dead load of the dry set concrete.

ELEMENT STRUCTURE USE

1. Beam

2. ColumnInstallation of capping beam using method formwork before casting

SHARING BYGOOD FORMWORK• Strong enough to withstand dead and live loads.

• Capable of retaining its shape by being efficiently propped and

braced horizontally and vertically.

• Joints should prevent leakage of cement grout.

• Should be capable of being removed in various parts without

damaging the concrete.

• Material used be suitable for reuse.

• Should be set accurately to the desired line.

• As lightweight as possible.

• Material should not warp or distort on exposure to the elements.

• Should rest on a firm base.

HANAFI ROSLAN

QAQC Exec

FIRDAUS RAMLAN

QAQC Lead

JANUARY 2021ENOTEK BULLETIN

QAQC CHECKLISTCOACHING PROGRAM & SHARING

PROGRESS INSPECTIONJOINT INSPECTION WITH SITE PIC & FRONTLINER

In January 2021, ENOTEK QAQC

Department running an awareness campaign to

front liner in order to increase the quality of

work in project . The main objective of program

is to alert the site person about important and

awareness of QAQC which is to assure

the quality of a product, and quality control, the

process of ensuring products

and services meet consumer expectations.

In this session , coaching has been conducted to Site PIC

about the QAQC checklist related to the program which is

change opinion about work progress quality and how to

inspect progress in the field.

During the field inspection, Q&A also implement to ensure

Site PIC understand the related item to check.

The aim of this coaching is to close the gap and

standardise the inspection of site progress to meet the

procedure and expectation