jcn electronics 'the servant project' poster
TRANSCRIPT
PROJECT DESCRIPTION A smart robot clearing its own field off by sending them into neıghbour’s fıeld
Main Requirements: - Robot should not exceed the boundaries and fence - Robot should completely clear its own field firstly to score - No hard wiring is allowed cross the field boundaries
METHOD OF SOLUTION
The design of the project is composed of 4 sub-blocks: - motion system - detection system - - catch and drop mechanism - power system
Efe ArınCem Recaı CIRAKCagdas AKSU
Mustafa Orcun ACARGoktug BORLU
“The SERVANT”
CONTACT INFORMATION - [email protected] - https://www.facebook.com/JCNElectronics/
TECHNICAL SPECIFICATIONS
- Size : 227.5mmx189mmx110mm - Weight : ??kg - Nominal speed: 15cm/sec - Fence avoidance distance: 3cm - Target detecting distance: 25cm - active ope - active operation time: 3 hours
ENERGY AND SAFETY
- 11.1 V 1100 Mah Li-Po battery - 5 V regulator - Special chasis design for batery charger socket to prevent accidents
LIMITATIONS
- Mulfunctioning with the narrow angles while detecting the fence
DELIVERABLES - The Servant - Battery charger - Field - Fence - 3 x Garbage - 3 x Garbage - Evil Eye Talisman - User manual - 2 Years Warranty
COST ANALYSIS