jeffrey allen joines, phd professor and department head ... · 17-4-2018 · 12/08-01/17 associate...
TRANSCRIPT
Jeffrey Allen Joines, PhD
Professor and Department Head
Textile Engineering, Chemistry, and Science
Alumni Distinguished Undergraduate Professor
Operations Graduate Research Program (Associate Member)
Integrated Manufacturing System Engineering (Associate Member)
NC State University
I. Introduction
I.B. Brief Resume
I.B.1. Education
Ph.D., 1996 Department of Industrial Engineering, NC State University, Raleigh, NC.
“Hybrid Genetic Search for Manufacturing Cell Design” under direction (Mike G. Kay and Russell E. King)
M.S., 1993 Department of Industrial Engineering, NC State University, Raleigh, NC.
B.S., 1990 Department of Industrial Engineering, NC State University, Raleigh, NC.
B.S., 1990 Department of Electrical Engineering, NC State University, Raleigh, NC.
I.B.2. Professional Experience Academic Appointments
08/17-present Professor, Department of Textile Engineering, Chemistry, and Science, NC State University
01/17-present Department Head, Department of Textile Engineering, Chemistry, and Science,
05/06-06/17 Associate Professor, Department of Textile Engineering, Chemistry, and Science, NC State University
12/08-01/17 Associate Department Head for Undergraduate Programs, Department of Textile Engineering,
Chemistry, and Science, NC State University, Raleigh, NC.
05/06-06/17 Associate Professor, Department of Textile Engineering, Chemistry, and Science, NC State University
01/06-04/09 Director of Textile Engineering Program, Raleigh, NC.
08/00-05/06 Assistant Professor, Department of Textile Engineering, Chemistry, and Science, NC State University,
Raleigh, NC.
10/95-06/00 Research Associate, Furniture Manufacturing and Management Center, Department of Industrial
Engineering, NC State University, Raleigh, NC.
01/91-09/95 Research Assistant, Department of Industrial Engineering, NC State University, Raleigh, NC.
08/91-05/94 Teaching Assistant, Department of Industrial Engineering, NC State University, Raleigh, NC.
I.B.3. Scholarly and Creative Activities
Refereed Activity Number
Books 4 (12 Versions)
Book Chapters 6 Total External Funding $2,237,582
Journal Articles 33 Total Internal Funding $1,602,323
Conference Proceeding, Refereed 36 Total Gifts $2,506,000
Non-Refereed Activity Number
Edited Books 2
Journal Articles 1
Conference Proceedings 6
I.B.4. Membership in Professional Organizations Professional Societies
• American Society for Engineering Education (ASEE), 2005-present
• Institute of Electrical and Electronics Engineers (IEEE), 1988-present.
• Institute for OR and the Management Sciences (INFORMS) 1992-present.
• Institute for Industrial Engineers, 1992-1998, 2008-2010.
I.B.5. Academic Honor Societies
• Member of the Academy of Outstanding Faculty Engaged in Extension (2017)
• Member of the Academy of Outstanding Teachers (2006).
• The Golden Chain Society (N.C. State Senior Honor Society)
• Alpha Pi Mu (Industrial Engineering).
• Tau Beta Pi (Engineering).
• Phi Kappa Phi (General Scholarship).
• Etta Kappa Nu (Electrical Engineering).
• Gamma Beta Phi (General Scholarship and Service).
I.B.6. Scholarly and Professional Honors 2017– Ed Fitts Department of Industrial & Systems Engineering Distinguished Alumnus Award
2017– Awarded Alumni Association Outstanding Extension and Outreach Award,
2017– Awarded NC State Outstanding Extension Service Award.
2016 – Board of Governors Award for Excellence in Teaching Recipient (First recipient ever in the College of Textiles)
2008, 09, 10, 13, 14, 15, 16 – College of Textile Nominee for the Board of Governors Award for Excellence
2014 – INFORMS Distinguished Service Award (International Award)
2012 – NC State University Alumni Association Distinguished Undergraduate Professor Award
2009 – Gertrude Cox Teaching Award for Innovative Excellence in Teaching and Learning with Technology for Large
Transformative Projects (with Steve Roberts)
2006 – Awarded NC State University Alumni Outstanding Teaching Award, NC State Alumni Association
2006 – Awarded Outstanding Teacher at NC State University, College of Textiles
2005 – Nominated for the Rich Felder University Teaching Award for Using Technology in the Classroom
2004 – Received the best paper award out of 100 papers for the paper titled A simulation-based scheduling system and its
implementation in a Textile operation 2nd Industrial Simulation Conf in Malaga Spain (with Kristin Thoney).
2004 –Awarded the Best New National Textile Center Proposal in the Management Systems Area for the proposal titled
"Quantifying the Value of Information Sharing in a Supply Chain" (S04-NS02).
2002 – Received a Scientific Excellence Award from National Textile Center
1998 – Received First place in the Pritsker Doctoral dissertation Award for the year’s best dissertation, Institute of Industrial
engineers.
I.B.7. Professional Service on Campus
• Department Head, 2017-present
• Member, University Department Head Advisory Board, 2017 – present
• Associate Department Head for Undergraduate Programs, 2009-2016.
• Chair, College of Textiles Course and Curriculum Committee, 2009-2010, 2015 – 2017.
• Member, Council on Undergraduate Education (CUE) (August 2015 – present)
• Chair, University Evaluation of Teaching Committee (August 2012 – May 2015).
• Member, University Evaluation of Teaching Committee (August 2010 – May 2015)
• Member, College of Textiles Course and Curriculum Committee, 2007- May 2017
• Chair of the TECS Course and Curriculum Committee, 2008-2017
• Chair of the Peer Review of Teaching Committee, TECS Dept, 2009-2017
• Member, College of Engineering Computer (COE) Committee, 2000-2017.
• Chair, COE Student Owned Computing Forum, 2002 - 2008
• Member, Learning in a Technology Rich Environment (LITRE) Advisory Board, 2004 - 2009.
• Member, COE World Wide Web Committee, 1999-2008.
• Co-Chair, College of Textiles Graduate Seminar, Spring 2005-2008.
I.B.8. Professional Service off Campus
• Consulting Activities
12/15 – 04/16 NovaNordisk, In
08/13 – 06/16 Hanes Brands, Inc,
• Chair of the Board, Winter Simulation Conference, 2015.
• Member of the Board, Winter Simulation Conference representing IEEE SMC, 2010 – present
• WSC Online Submission and Database Technical Coordinator. 2000 – 2014.
• Track Chair Coordinator Winter Simulation Conference 2008, 11, 12, 16, and 18
• Program Chair, 2005 Winter Simulation Conference (WSC), 2000 – 2005.
• Workshops Chair, 2000 Congress on Evolutionary Computation (CEC), San Diego, CA July 11-14, 2000.
• Co-Proceedings Editor, 2000 Winter Simulation Conference, December 1998-2000.
• Associate Editor for Fuzzy Optimization and Decision Making
• Reviewer for a large number of journals and conferences
I.C. Candidate’s Statement
When looking at the categories of teaching, research, and service that define a faculty member’s role, I am driven to help
make every person or organization be as successful as the entity possibly can be whether that is teaching and mentoring
students, mentoring or collaborating with colleagues, working with companies or for the department, college, or university.
Teaching and Mentoring
“Teaching is not a profession; it's a passion. Without passion for your subject and a desire for your students to learn and be the
best in the world, then we have failed as a teacher and failure is not an option.” ~ John F. Podojil
This quote which is taped to my monitor completely exemplifies my personality and teaching philosophy. Every-thing I do
and try is an attempt to facilitate better learning and excitement about the subject I am teaching. My goal is to bring high
energy and excitement to the teaching arena whether it is in the classroom, mentoring and advising students, working on
student projects, recruiting the next crop of students as well as discussing or delivering workshops/presentations on teaching
to peers and graduate students. I strive to create learning environments where students can learn, want to seek out new
knowledge, have a desire to learn more as well as have the ability to apply this beyond the classroom. I am firm believer that
if you are excited and passionate about the subject and demonstrate this in your teaching, students embrace the energy and
enjoy the class no matter how challenging the class.
As seen in Section II, I have taught a full teaching load of three classes and two labs. In many years, I taught an
extra class in order to teach a separate graduate class. I have always received student evaluations that are higher than the
departmental average while teaching one of the most demanding courses in the TE program. In recognizing that our students
were not using their programming class, I developed TE110 computer based modeling with Excel and VBA which is one of
the most demanding classes in our TE program. The students complain about the amount of work as well as how challenging
the class is but they all realize how important it is. In a recent survey (46% response rate) of the last five year alumni, 84.1%
of the 90 respondents mentioned TE 110 material as making a difference in their careers. I received five or six testimonials
every year about how useful the course is and how they have been labeled superstars because of their ability. I try to bring in
relevance in all of my classes I teach based on my own consulting and applied research with companies. It is student
successes that drive me to improve as a teacher in order to reach more students. So challenge the students to think critically
about situations to make them global thinkers. For my teaching innovation and instruction, I have been awarded the 2006 NC
State Alumni Outstanding Teacher Award, the 2009 Gertrude Cox Award for Innovative Excellence in Teaching and
Learning with Technology, the 2012 NC State Alumni Distinguished Undergraduate professor as well as received the most
coveted award giving to one faculty member of the university the 2016 Board of Governors Award for Excellence in
Teaching.
In my opinion, teaching does not happen always in the classroom but you also need to mentor and advise
undergraduate and graduate students as part of your teaching activities. Teaching means giving students opportunities to
explore and grow. These interactions maybe about life, careers, etc. but that is as important as teaching material. Your goal
should be for students to reach their fullest potential and enable them to do so by pushing them. You need to listen and
understand when students are having difficulties. A young man who had just transferred from ECE over to TE was in two of
my classes. He was handling the demanding classes ok but I could tell that he was just going through the motions and I was
worried about him. After a long discussion, I discovered he was barely surviving engineering and was not really happy. I
asked him to consider textile technology which is more of a business applied science based degree which I felt would fit his
passions better. This is why I am a faculty member in a smaller department who cares so much and tries so hard to make
everyone reach their fullest potential and find their passion as seen from this email from this student.
“Just wanted to update you on what I have been doing since graduation. Since May I have been hired part time to Mastec Network
Solutions on 9/10/12 as a CloseOut Specialist. After learning the role rather quickly, they offered me full time after 1 week! The industry I
am in is Telecom and I work in the 4G LTE department so my workload far exceeded others' with my same title. That being said I
managed to complete all tasks ahead of schedule (which made the company's quarterly goal and gave mgmt a huge bonus haha) which was
HUUUUGEE for me only being there for 2 months. since that happened they have given me gifts for my work done, i have been invited to
a corporate Hurricanes game, and now they are flying my supervisor and myself out to Denver on Monday for 2-3 weeks to train other
employees at another office out there! Things are definitely going well. I am on track to be promoted soon, and after that hopefully have a
Project Manager position within the next year, making 70k+ *fingers crossed* Well Dr. J I wanted to thank you again for everything you
did for me back when I took your TE110 class. You sir are one of the only professors I really learned from and enjoyed coming to your
class...and you are a major factor in why I graduated with the degree I have now in Textile Technology (thanks to your referral) .”
Research
Goal 5 of NC State’s Strategic plan is to “Enhance local and global engagement through focused strategic partnerships”
which aligns with my research thrust of applied research working with companies or organizations on solving a real world
problems (e.g., Hanesbrand’s inventory models and scheduling, Duke Hospital’s PACU nurse scheduling, NC DOT DMV
evaluator schedules, etc.). The inventory model that was developed in 2002 has led to millions of annual savings as well as
the company hiring my PhD student Ben Martin. I believe these type of projects allow me to be an outstanding teacher by
bringing these experiences, data, etc. into the classroom as well as the opportunity to mentor graduate students to be very
successful. As seen in Section III.B, I have had a lot of success in obtaining money from industry or industry driven
organizations. In 2011, I cultivated and received a $1,000,000 gift from Hanesbrands for 8/2012 – 4/2016. As Director of the
Hanesbrands/NC State partnership (see Section III.B and IV.A for more Information), I manage the utilization of the money
for student projects, class projects, student events, research projects, etc. The impact the partnership has had on NC State as
well as Hanes has been significant which is why Hanes has just renewed for another $1,000,000 for the next five years.
Finally as part of my academic scholarship, my book (co-authored Stephen Roberts) “Simulation Modeling with
SIMIO: A workbook” is being used by over 30 universities like Ga Tech, Oklahoma State, RIT, Northwestern, NC State, etc.
as well as by industry personnel. We just completed the 4th edition which represented a complete rewrite and restructuring of
the book. We have purposely kept the book inexpensive (i.e., e-book is 29.99 and black and white copy $43.99) so people
will buy the book to help them learn simulation modeling. It is designed in an inquiry guided fashion where the book walks
the student through modeling as well as asking them probing questions. We sold 703 copies in 2015 and have averaged 650
copies sold each year for all editions. Almost all of my research is performed in an interdisciplinary collaborative manner
with a variety of different individuals because my expertise of optimization, process improvement, statistical data analysis,
and computer simulation and information systems can be used to solve many different types of problems. I have 67 refereed
publications in journal articles, conference proceedings and book chapters to go along with my book. In my field, it often
takes nine to twelve months to receive the first reviews. As a result, we often publish our work in conferences where ASEE
and IEEE conferences have on average a 45% acceptance rate where one of my IEEE conference papers has over 760
citations as stated by Google Scholar and technical report as 1452 references.
Service(10%) and Administration (20%)
Over 30% of my time is spent in service to the department, college and the university again trying to help students and
colleagues. Most of this time is spent in my administrative role as Associate Department head for undergraduate programs for
the TECS department which facilitates my desire to have an impact on students as well as my colleagues.
Associate Department Head-Besides advising my own official 28 advisees, I spend a lot of time advising/mentoring
other undergraduate students in classes, careers, etc. As part of my role, I assist Liz Moran in evaluating the applications to
Textile Engineering during the CODA (Change of Degree of Audi) process to decide who is accepted into TE program. As
part of the process I often to meet dozen students to discuss their aspirations and goals to help them make a decision about
TE or TT. As my role, I give presentations on our three programs at the COT Career fair the past two years to point out to
these companies that students in PCC, TE, and TT have tremendous skill sets that their organization could use. Going with
theme of helping our students be successful, I wrote 27 student recommendation letters for graduate school, scholarships,
study abroad, etc. in 2015. To aid the Department Head, I developed the TECS annual faculty reporting system in 2009. This
tremendous endeavor each year of querying the various database systems to gather the information like courses, students,
research proposals and projects has saved our faculty a lot of their time. Once the faculty have finished updating all the
information in their individual MS Excel workbooks, my system combines all the information to generate all the documents
needed by the department head to report our yearly activity of research outcomes (e.g., projects, proposals, publications,
presentations, outreach, etc.) Also, the system creates spreadsheets for each of the faculty to be used in their annual reviews
automatically. Beginning in 2015, the entire college started to use my system to be consistent across the departments.
Recruitment – A large portion of my time is spent recruiting students both from high school as well as transfers within the
university through open houses, creation of program fact sheets, meeting with parents/students, interviewing for scholarships
and working to retain these students once they are in our programs. As Co-Director of the Polymer Engineering and
Chemistry Camp (with Russell E. Gorga), 2006 – present, For the past two years we have had close to 80 applicants with us
accepting little over 40 participants. Without a doubt this has had an impact our PCC/TE/TE programs. I spend time ordering
and buying food for the camp as well as soliciting sponsorship to keep the fee very low so students of all backgrounds have
an opportunity to come. I believe I have made an impact on our students and programs which are growing.
Chair of the University Evaluation on Teaching (August 2012-May 2015) –I was asked to chair the committee for
three years to continue the momentum we created during my first year which had to be approved by the Provost each
additional year. Under my leadership, the committee addressed some very touchy issues of improving response rates of
student evaluations as well as addressing peer review of teaching. Even though this was a large commitment (see Section VI
for more information), I have had a large impact on the NC State community with regard to evaluation of teaching, As a
result of the work, I was asked to give presentations on our recommendations to the University’s Provost and Dean’s Council
in July 2013, September 2014, and May 2015 and to several Associated Deans Meetings and Faculty Senate subcommittees.
Also, one needs to serve their profession as well where I have been heavily involved in the global simulation
community with various roles of the International Winter Simulation Conference as proceedings editor, program chair, track
coordinator, and the Board of the WSC. In 2014, I was awarded the prestigious INFORMS Distinguished Service Award to
recognize individuals who have provided a long-standing exceptional service to the simulation community.
II. TEACHING AND MENTORING OF UNDERGRADUATE AND GRADUATE STUDENTS
II.A. Teaching Effectiveness
II.A.1. List of Courses and Student Evaluation Summary
During my fourteen years, I have taught and developed a variety of classes. TE 105 and TE/ISE 110 (Computer Based
Modeling for Engineers) , TE 205 (Analog and Digital Circuits), TE 404 (Lean Six Sigma) are required classes for all Textile
Engineering (TE) students while TE 440 (Information System Design) is a required course only for the TE students in the
Information Systems Concentration and is an engineering elective for other TE students. These undergraduate courses are at
the freshman (TE 105 and TE/ISE 110), sophomore (TE 205) as well as senior (TE 404, TE 440) levels courses. The graduate
classes (TE 540 (Information System Design), TE 589I (Evolutionary Optimization), ISE/TE589/OR591 (Simulation
modeling with SIMIO) are electives. I have created/taught the first offerings of TE440 (Fall 2000), TE 589I (Fall 2002), TE
540, TE/ISE 589 Simulation Modeling with SIMIO (Spring 2010), and TE 110 (Spring 2006). I teach classes in all levels
from freshman to graduate students. A majority of my classes are taught at the freshman and sophomore levels (TE 110 and
TE 205). I have consistently been at or above the mean of the TECs department in my class evaluations of the instructors.
TE 440 and TE 540 are piggy back courses. It should be noted that TE 424 is my lab section which is a double lab (i.e.,
rather than breaking it up into two lab sections of 20 I teach one of size 40). Even with my heavy administration load I have
taught at or above the department load of three classes and two labs. In order to teach graduate level courses besides piggy
back ones, I have to teach an overload in order to teach my simulation class. My graduate class 2016 spring semester for
example had 23 students in it. The following table just summarizes the question “Overall, the instructor was an effective
teacher”.
Course Semester # Stud # Responses Faculty Rating TECS Mean
ISE/OR/TE 562 Spr 2017 20 13 4.9 4.2 TE 424 Spr 2017 38 27 4.9 4.3 TE 404 Spr 2017 38 27 4.9 4.3
TE 110 Fall 2016 25 12 4.8 4.2
TE 440/540 Fall 2016 22 11 4.9 4.2
TE 589/
ISE589/
OR591
Spring 2016
9
7
6
5
6
4
5.0
4.8
5.0
4.2
4.4
4.8
TE 404 Spring 2016 37 19 4.9 4.2
TE 424 Spring 2016 38 19 4.9 4.2
TE 110 Fall 2015 32 22 4.9 4.2
TE 440/540 Fall 2015 24 12 4.9 4.2
TE/ISE 589 Spr 2015 11 9 4.7 4.2 TE 424 Spr 2015 36 27 4.9 4.2 TE 404 Spr 2015 36 27 4.9 4.2
TE 110 Fall 2014 34 20 5.0 4.0
TE 440/540 Fall 2014 19 15 4.7 4.0
TE/ISE 589 Spr 2014 11 9 4.7 4.2 TE 424 Spr 2014 23 13 4.7 4.2 TE 404 Spr 2014 23 15 4.8 4.2
ISE 589 DE Spr 2014 5 2 5.0 4.2
TE 110 Fall 2013 33 18 4.9 4.2
TE 440/540 Fall 2013 9 8 5 4.2
TE/ISE 589 Spr 2013 17 12 4.8 4.3
TE 424 Spr 2013 31 13 4.5 4.3
TE 404 Spr 2013 30 15 4.6 4.3
ISE 589 DE Spr 2013 5 2 5.0 4.3
TE 440/540 Fall 2012 22 12 5.0
TE/ISE 589 Spr 2012 28 11 4.8 4.2
TE 424 Lab Spr 2012 28 15 4.3 4.2
TE 404 Spr 2012 28 17 4.5 4.2
TE 205Lab Spr 2012 14 10 4.9 4.2
TE110 Fall 2011 28 28 4.80 4.10
TE 440/540 Fall 2011 18 14 4.90 4.10
TE 205Lab 201 Spr 2011 20 17 4.50 4.20
TE 205Lab 202 Spr 2011 19 14 4.70 4.20
TE/ISE 589 Spr 2011 26 13 4.50 4.20
II.A.2. Student and Peer Evaluations
II.A.2.a. Student Evaluations
Thank a Teacher Program
Every semester since the start of the program, I have receive at least one or more thank you notes from current and previous
students. The following are the seven Thank You teacher notes I received Fall 2015 for the spring 2016 semester. Again,
these unsolicited comments are the reasons why I keep doing what I am doing (i.e., impacting students’ lives). I have
removed the names when they were not anonymous to protect the identity but these are direct quotes. The first comment was
from an Army ROTC where they took the spring off to do their basic training. Note, the student who commented that felt like
they disappointed me aced the next test and final. So challenge your students to do even more.
I cannot thank you enough for all the help you did this past spring when I was not able to register for my classes.
You went above and beyond of what I'ev expected from any advisor/professor from NC State. My mom was also
very impressed with all the help you gave her. I appreciate what you have done for me, and I am very glad you are
my advisor. Thanks Dr. J! -XXXX XXXX
I'd like to say thank you to Dr. Joines personally. He goes out of his way on multiple occasions outside of the
classroom to provide guidance and suggestions to students whether it may be future classes, what job opportunities
may be available for someones skill set, or just personal conversations in general. It has been a joy this semester in
Six Sigma learning about practical applications of manufacturing in real world examples, but has also been great to
be around Dr. J outside of the class as well. Countless times I've seen Dr. Joines spend time with students working
on senior design projects, he has helped students in other classes learn difficult topics, and he has even told us of a
project he is aiding a former student of Textiles who is now working full time. It is awesome that he takes the time
to help previous students brainstorm and analyze projects for their Engineering jobs later down the road. It is
extremely relieving to know that once I have completed my student career at Textiles, I will have still have those
connections and the ability to consult with professors like Dr. J to help with some topic of interest. THANKS DR.
J!!-XXXX XXXX
I just wanted to say thank you for all that you constantly do for me and the rest of the students in the TE
department. You really help motivate and push me to be the best student I can be. When you wrote 'you are
capable of much more than this' on my Six Sigma test I felt like I had let you down and that was an awful feeling.
Also thank you for showing all of your students that you care about how they are doing and are willing to make
any accommodations you can to help make things easier for us. I consider myself very lucky to have a professor
like you around during my college years. -XXXX XXXXX
Dear Dr. J.: Just wanted to say thank you again for another awesome year! I have had the best time at NC State
and having you as a professor has made it that much better. Thanks for always caring for students not just in class
but also outside of the classroom. You make class fun because of the interactions you have with students, and
relating examples to real life situations (especially golf). Also thank you for all of your advice and helping out
with situations with school, applying for internships, and life in general. I hope you have an awesome summer
and I look forward to more classes with you next year!! -XXXX XXXX
Thank you for being an all-around outstanding faculty member, both in and outside of the class room. You have
always made students feel welcomed and encouraged at NC State. In the classroom, you have expertly taught
students many useful skills, while outside of the classroom you have provided them with an expert source of advice
and even with assistance in finding employment. I have enjoyed getting to take your courses and appreciate the
personal interest you have taken in both me and my fellow students. Thank you for helping to make all of my
undergraduate years at NC State excellent! --XXXX XXXX
Thank you so much for all you have done for me during my time at NC State. You have been a great adviser and
teacher and I really appreciate all of your support. It is so evident that you really want your students to succeed
and you go above and beyond to help them do so. I hope this serves as a small token of appreciation for all that
you have done for me and all that you do for all of the students at the College of Textiles. I'm going to miss you,
Dr. J!
--XXXX XXXX
Thank you so much for everything you do! You were a fantastic teacher forTE 110 and I look forward to TE 440 in
the fall. Also, thank you for working so hard to make sure that I get the classes I need and for providing excellent
advice for my schedule.
-XXXX XXXX
Official Classeval RPT Generation Tool.
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Sprg
Year 2016 2016
Course TE 589 001 TE 424 001
Courses
Title SP Stud TX Engr Sc TE Quality Lab
Responses 5 18
Enrolled 9 38
Response Rate 55.56% 47.37%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructors teaching aligned with the
courses learning objectives/outcomes 4.8 0.2 5 4.4 4.8 0.09 18 4.4
2. The instructor was receptive to students
outside the classroom 5 0 4 4.5 4.9 0.06 17 4.3
3. The instructor explained material well. 5 0 4 4.3 4.6 0.12 17 4.1
4. The instructor was enthusiastic about
teaching the course 5 0 4 4.5 4.8 0.1 16 4.4
5. The instructor was prepared for class 5 0 4 4.5 4.9 0.08 17 4.4
6. The instructor gave useful feedback. 5 0 4 4.3 4.6 0.21 17 4.1
7. The instructor consistently treated
students with respect 5 0 4 4.6 4.8 0.1 17 4.4
8. Overall, the instructor was an effective
teacher 5 0 4 4.4 4.9 0.08 17 4.2
9. The course materials (e.g., readings,
videos, class notes, course packs, FAQs,
websites, course webpage, and blogs) were
valuable aids to learning 4.8 0.25 4 4.4 4.6 0.17 17 4.2
10. The course assignments (e.g., homework,
exams, quizzes, lab reports, papers,
presentations, projects, portfolios, artistic
impressions, critiques, blogs, and videos)
were valuable aids to learning 5 0 4 4.3 4.8 0.11 17 4.2
11. This course improved my knowledge of
the subject 5 0 4 4.4 4.9 0.09 16 4.4
12. Overall, this course was excellent 4.8 0.25 4 4.2 4.8 0.11 17 4.2
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Sprg
Year 2016 2016
Course TE 404 001 OR 591 001
Courses
Title Six Sigma Quality Special Topics
Responses 19 4
Enrolled 36 6
Response Rate 52.78% 66.67%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructors teaching aligned with the
courses learning objectives/outcomes 4.9 0.07 19 4.4 5 0 4 5
2. The instructor was receptive to students
outside the classroom 4.9 0.11 18 4.3 5 0 4 5
3. The instructor explained material well. 4.8 0.1 18 4.1 5 0 4 5
4. The instructor was enthusiastic about
teaching the course 4.9 0.08 18 4.4 5 0 4 5
5. The instructor was prepared for class 4.7 0.14 18 4.4 5 0 4 5
6. The instructor gave useful feedback. 4.9 0.06 18 4.1 5 0 4 5
7. The instructor consistently treated
students with respect 4.8 0.09 18 4.4 5 0 4 5
8. Overall, the instructor was an effective
teacher 4.9 0.08 18 4.2 5 0 4 5
9. The course materials (e.g., readings,
videos, class notes, course packs, FAQs,
websites, course webpage, and blogs) were
valuable aids to learning 4.8 0.1 16 4.2 5 0 4 5
10. The course assignments (e.g., homework,
exams, quizzes, lab reports, papers,
presentations, projects, portfolios, artistic
impressions, critiques, blogs, and videos)
were valuable aids to learning 4.8 0.1 18 4.2 5 0 4 5
11. This course improved my knowledge of
the subject 4.9 0.08 18 4.4 5 0 4 5
12. Overall, this course was excellent 4.8 0.1 18 4.2 5 0 4 5
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Fall
Year 2016 2015
Course ISE 589 001 TE 440 001
Courses TE 440 001, TE 540 001
Title Spec Topics IE TEX Info Sys Des
Responses 6 9
Enrolled 7 22
Response Rate 85.71% 40.91%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructors teaching aligned with the
courses learning objectives/outcomes 4.8 0.17 6 4.5 4.7 0.17 9 0
2. The instructor was receptive to students
outside the classroom 5 0 5 4.5 4.8 0.15 9 0
3. The instructor explained material well. 4.5 0.34 6 4.3 4.8 0.15 9 0
4. The instructor was enthusiastic about
teaching the course 4.8 0.17 6 4.5 4.7 0.17 9 0
5. The instructor was prepared for class 4.8 0.17 6 4.5 4.6 0.18 9 0
6. The instructor gave useful feedback. 4.8 0.17 6 4.3 4.4 0.24 9 0
7. The instructor consistently treated
students with respect 4.8 0.17 6 4.6 4.9 0.11 9 0
8. Overall, the instructor was an effective
teacher 4.8 0.17 6 4.4 4.9 0.11 9 0
9. The course materials (e.g., readings,
videos, class notes, course packs, FAQs,
websites, course webpage, and blogs) were
valuable aids to learning 4.7 0.21 6 4.5 4.6 0.24 9 0
10. The course assignments (e.g., homework,
exams, quizzes, lab reports, papers,
presentations, projects, portfolios, artistic
impressions, critiques, blogs, and videos)
were valuable aids to learning 4.8 0.17 6 4.4 4.8 0.15 9 0
11. This course improved my knowledge of
the subject 4.8 0.17 6 4.5 4.7 0.17 9 0
12. Overall, this course was excellent 4.8 0.17 6 4.4 4.6 0.18 9 0
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Fall Sprg
Year 2015 2015
Course TE 110 001 TE 424 001
Courses TE 110 001 TE 424 001
Title Comp Mod For Engrs TE Quality Lab
Responses 12 27
Enrolled 27 36
Response Rate 44.44% 75.00%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructors teaching aligned with the
courses learning objectives/outcomes 4.8 0.11 12 4.4 4.7 0.1 27 4.4
2. The instructor was receptive to students
outside the classroom 4.9 0.08 12 4.3 4.8 0.1 27 4.3
3. The instructor explained material well. 4.8 0.11 12 4.1 4.6 0.12 27 4.1
4. The instructor was enthusiastic about
teaching the course 5 0 12 4.4 4.9 0.07 27 4.4
5. The instructor was prepared for class 5 0 12 4.5 4.9 0.09 27 4.4
6. The instructor gave useful feedback. 5 0 12 4 4.6 0.2 27 4.2
7. The instructor consistently treated
students with respect 4.9 0.08 12 4.5 4.9 0.06 27 4.5
8. Overall, the instructor was an effective
teacher 4.9 0.08 12 4.2 4.9 0.07 27 4.2
9. The course materials (e.g., readings,
videos, class notes, course packs, FAQs,
websites, course webpage, and blogs) were
valuable aids to learning 4.8 0.11 12 4.2 4.8 0.09 24 4.1
10. The course assignments (e.g., homework,
exams, quizzes, lab reports, papers,
presentations, projects, portfolios, artistic
impressions, critiques, blogs, and videos)
were valuable aids to learning 4.8 0.11 12 4.2 4.9 0.07 27 4.3
11. This course improved my knowledge of
the subject 4.9 0.08 12 4.4 4.9 0.07 27 4.4
12. Overall, this course was excellent 4.8 0.18 12 4.1 4.7 0.14 27 4.1
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Sprg
Year 2015 2015
Course TE 404 001 ISE 589 603
Courses TE 404 001 ISE 589 603
Title Six Sigma Quality Spec Topics IE
Responses 27 6
Enrolled 35 7
Response Rate 77.14% 85.71%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.9 0.07 27 4.4 4.7 0.33 6 4.6
2. The instructor was receptive to students
outside the classroom 4.9 0.08 27 4.3 4.7 0.33 6 4.5
3. The instructor explained material well. 4.6 0.13 27 4.1 4.3 0.33 6 4.4
4. The instructor was enthusiastic about
teaching the course 4.8 0.09 27 4.4 4.3 0.33 6 4.5
5. The instructor was prepared for class 4.9 0.07 27 4.4 4.5 0.34 6 4.6
6. The instructor gave useful feedback. 4.8 0.08 26 4.2 4 0.37 6 4
7. The instructor consistently treated
students with respect 5 0 27 4.5 4.7 0.33 6 4.6
8. Overall, the instructor was an effective
teacher 4.9 0.07 27 4.2 4.5 0.34 6 4.5
9. The course readings were valuable aids to
learning 4.7 0.14 23 4.1 4.5 0.34 6 4.3
10. The course assignments were valuable
aids to learning 4.8 0.12 27 4.3 4.7 0.33 6 4.3
11. This course improved my knowledge of
the subject 5 0.04 27 4.4 4.7 0.33 6 4.6
12. Overall, this course was excellent 4.7 0.1 27 4.1 4.5 0.34 6 4.3
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Fall
Year 2015 2014
Course ISE 589 601 TE 440 001
Courses ISE 589 601 TE 440 001, TE 540 001
Title Spec Topics IE Textile Information
Responses 1 15
Enrolled 7 19
Response Rate 14.29% 78.95%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor provided course
objectives/outcomes 5 0 1 4.6 4.7 0.13 15 0
2. The instructor was receptive to student
questions and concerns 4 0 1 4.5 4.8 0.15 15 0
3. The instructor explained difficult material
well 5 0 1 4.4 4.9 0.1 14 0
4. The instructor was enthusiastic about
teaching the course 5 0 1 4.5 4.9 0.09 15 0
5. The instructor was prepared for class 5 0 1 4.6 4.7 0.13 15 0
6. The instructor gave prompt and useful
feedback 4 0 1 4 4.5 0.19 15 0
7. The instructor consistently treated
students with respect 5 0 1 4.6 4.8 0.11 15 0
8. Overall, the instructor was an effective
teacher 5 0 1 4.5 4.7 0.13 14 0
9. The course readings were valuable aids to
learning 5 0 1 4.3 4.2 0.24 15 0
10. The course assignments were valuable
aids to learning 5 0 1 4.3 4.8 0.11 15 0
11. This course improved my knowledge of
the subject 5 0 1 4.6 4.7 0.12 15 0
12. Overall, this course was excellent 5 0 1 4.3 4.7 0.13 15 0
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Fall Sprg
Year 2014 2014
Course TE 110 001 TE 424 001
Courses TE 110 001 TE 424 001
Title Computer-Based Mode Textile Engineering
Responses 17 13
Enrolled 34 23
Response Rate 50.00% 56.52%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 5 0 17 4.2 4.4 0.24 13 4.4
2. The instructor was receptive to students
outside the classroom 5 0 17 4.1 4.5 0.24 13 4.2
3. The instructor explained material well. 4.8 0.11 17 3.9 4.5 0.18 13 4.1
4. The instructor was enthusiastic about
teaching the course 4.9 0.06 17 4.3 4.6 0.18 13 4.4
5. The instructor was prepared for class 4.9 0.06 17 4.3 4.5 0.18 13 4.4
6. The instructor gave useful feedback. 4.6 0.17 17 3.9 4.5 0.24 13 4.1
7. The instructor consistently treated
students with respect 5 0 17 4.2 4.8 0.12 13 4.4
8. Overall, the instructor was an effective
teacher 5 0 17 4 4.7 0.18 13 4.2
9. The course readings were valuable aids to
learning 4.4 0.27 16 3.9 4.5 0.26 12 4.2
10. The course assignments were valuable
aids to learning 4.9 0.06 16 4 4.6 0.26 12 4.3
11. This course improved my knowledge of
the subject 4.9 0.06 16 4.2 4.6 0.24 13 4.4
12. Overall, this course was excellent 4.8 0.11 17 3.9 4.6 0.24 13 4.1
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Sprg
Year 2014 2014
Course TE 404 001 ISE 589 601
Courses TE 404 001 ISE 589 601
Title Textile Engineering Special Topics In I
Responses 14 2
Enrolled 23 6
Response Rate 60.87% 33.33%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.6 0.17 14 4.4 5 0 2 4.6
2. The instructor was receptive to students
outside the classroom 4.5 0.23 14 4.2 5 0 2 4.4
3. The instructor explained material well. 4.4 0.17 14 4.1 5 0 2 4.1
4. The instructor was enthusiastic about
teaching the course 4.9 0.1 14 4.4 5 0 2 4.6
5. The instructor was prepared for class 4.6 0.17 14 4.4 5 0 2 4.7
6. The instructor gave useful feedback. 4.4 0.29 14 4.1 5 0 2 4.2
7. The instructor consistently treated
students with respect 4.9 0.1 14 4.4 5 0 2 4.6
8. Overall, the instructor was an effective
teacher 4.8 0.16 14 4.2 5 0 2 4.3
9. The course readings were valuable aids to
learning 4.5 0.24 13 4.2 5 0 2 4.1
10. The course assignments were valuable
aids to learning 4.7 0.16 14 4.3 5 0 2 4.3
11. This course improved my knowledge of
the subject 4.9 0.1 14 4.4 5 0 2 4.5
12. Overall, this course was excellent 4.6 0.23 14 4.1 5 0 2 4.2
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Fall
Year 2014 2013
Course ISE 589 001 TE 440 001
Courses ISE 589 001, TE 589 001 TE 440 001, TE 540 001
Title Special Topics In I TEX Info Sys Des
Responses 9 7
Enrolled 11 8
Response Rate 81.82% 87.50%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.6 0.34 9 0 4.7 0.18 7 0
2. The instructor was receptive to students
outside the classroom 4.6 0.34 9 0 5 0 7 0
3. The instructor explained material well. 4.9 0.11 9 0 5 0 7 0
4. The instructor was enthusiastic about
teaching the course 4.9 0.13 8 0 5 0 7 0
5. The instructor was prepared for class 4.7 0.17 9 0 4.9 0.14 7 0
6. The instructor gave useful feedback. 4.8 0.15 9 0 4.9 0.14 7 0
7. The instructor consistently treated
students with respect 4.8 0.15 9 0 5 0 7 0
8. Overall, the instructor was an effective
teacher 4.7 0.24 9 0 5 0 7 0
9. The course readings were valuable aids to
learning 4.7 0.24 9 0 4.8 0.17 6 0
10. The course assignments were valuable
aids to learning 4.9 0.11 9 0 4.9 0.14 7 0
11. This course improved my knowledge of
the subject 4.9 0.11 9 0 4.9 0.14 7 0
12. Overall, this course was excellent 4.8 0.22 9 0 5 0 7 0
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Fall Sprg
Year 2013 2013
Course TE 110 001 TE 424 001
Courses TE 110 001 TE 424 001
Title Comp Mod For Engrs TE Quality Lab
Responses 17 13
Enrolled 33 31
Response Rate 51.52% 41.94%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.8 0.1 17 4.4 4.4 0.14 13 4.5
2. The instructor was receptive to students
outside the classroom 5 0 17 4.2 4.5 0.14 13 4.3
3. The instructor explained material well. 4.8 0.11 17 4.1 4.5 0.14 13 4.2
4. The instructor was enthusiastic about
teaching the course 5 0 17 4.4 4.5 0.14 13 4.5
5. The instructor was prepared for class 5 0 17 4.4 4.5 0.14 13 4.5
6. The instructor gave useful feedback. 4.8 0.1 16 4.1 4.5 0.14 13 4.3
7. The instructor consistently treated
students with respect 5 0 17 4.4 4.5 0.14 13 4.6
8. Overall, the instructor was an effective
teacher 4.9 0.06 17 4.2 4.5 0.14 13 4.3
9. The course readings were valuable aids to
learning 4.7 0.12 16 4 4.4 0.18 13 4.1
10. The course assignments were valuable
aids to learning 4.9 0.08 17 4.2 4.5 0.14 13 4.3
11. This course improved my knowledge of
the subject 4.9 0.06 17 4.3 4.5 0.14 13 4.5
12. Overall, this course was excellent 4.8 0.14 17 4.1 4.4 0.14 13 4.2
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Sprg
Year 2013 2013
Course TE 404 001 ISE 589 601
Courses TE 404 001 ISE 589 601
Title Six Sigma Quality Spec Topics IE
Responses 15 2
Enrolled 30 5
Response Rate 50.00% 40.00%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.5 0.13 15 4.5 5 0 2 4.4
2. The instructor was receptive to students
outside the classroom 4.6 0.13 15 4.3 5 0 2 4.4
3. The instructor explained material well. 4.5 0.13 15 4.2 5 0 2 4.1
4. The instructor was enthusiastic about
teaching the course 4.5 0.13 15 4.5 5 0 2 4.7
5. The instructor was prepared for class 4.5 0.13 15 4.5 5 0 2 4.6
6. The instructor gave useful feedback. 4.5 0.13 15 4.3 5 0 2 4.3
7. The instructor consistently treated
students with respect 4.6 0.13 15 4.6 5 0 2 4.4
8. Overall, the instructor was an effective
teacher 4.6 0.13 15 4.3 5 0 2 4.4
9. The course readings were valuable aids to
learning 4.2 0.22 15 4.1 4.5 0.5 2 4.2
10. The course assignments were valuable
aids to learning 4.3 0.16 15 4.3 5 0 2 4.7
11. This course improved my knowledge of
the subject 4.4 0.13 15 4.5 5 0 2 4.4
12. Overall, this course was excellent 4.3 0.12 15 4.2 5 0 2 4.3
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Fall
Year 2013 2012
Course ISE 589 001 TE 440 001
Courses ISE 589 001, OR 591 001, TE 589
001 TE 440-001, TE 540-001
Title Spec Topics IE TEX Info Sys Des
Responses 12 12
Enrolled 17 22
Response Rate 70.59% 54.55%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.7 0.14 12 0 4.9 0.08 12 0
2. The instructor was receptive to students
outside the classroom 4.8 0.13 12 0 5 0 12 0
3. The instructor explained material well. 4.7 0.19 12 0 4.9 0.08 12 0
4. The instructor was enthusiastic about
teaching the course 4.6 0.15 12 0 4.9 0.08 12 0
5. The instructor was prepared for class 4.5 0.23 12 0 5 0 11 0
6. The instructor gave useful feedback. 4.8 0.13 12 0 5 0 11 0
7. The instructor consistently treated
students with respect 4.9 0.08 12 0 5 0 12 0
8. Overall, the instructor was an effective
teacher 4.8 0.13 12 0 5 0 12 0
9. The course readings were valuable aids to
learning 4.8 0.11 12 0 4.6 0.3 7 0
10. The course assignments were valuable
aids to learning 4.8 0.18 12 0 4.8 0.13 12 0
11. This course improved my knowledge of
the subject 4.9 0.08 12 0 4.8 0.11 12 0
12. Overall, this course was excellent 4.8 0.11 12 0 4.8 0.13 12 0
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Sprg
Year 2012 2012
Course TE 589 001 TE 424 001
Courses ISE 589, OR 591, TE 589 TE 424
Title Special Studies In Textile Engineering
Responses 11 15
Enrolled 28 28
Response Rate 39.29% 53.57%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.5 0.16 11 4.6 4.4 0.14 13 4.4
2. The instructor was receptive to students
outside the classroom 4.6 0.15 11 4.6 4.4 0.13 14 4.4
3. The instructor explained material well. 4.7 0.14 11 4.4 4.4 0.14 13 4
4. The instructor was enthusiastic about
teaching the course 4.8 0.12 11 4.6 4.3 0.16 14 4.5
5. The instructor was prepared for class 4.7 0.14 11 4.6 4.3 0.16 14 4.4
6. The instructor gave useful feedback. 4.7 0.14 11 4.4 4.2 0.18 15 4.2
7. The instructor consistently treated
students with respect 4.8 0.12 11 4.7 4.4 0.13 15 4.5
8. Overall, the instructor was an effective
teacher 4.8 0.12 11 4.5 4.3 0.16 14 4.2
9. The course readings were valuable aids to
learning 4.7 0.14 11 4.4 3.8 0.36 13 4
10. The course assignments were valuable
aids to learning 4.8 0.12 11 4.5 3.9 0.27 15 4.2
11. This course improved my knowledge of
the subject 4.8 0.12 11 4.6 4 0.29 15 4.4
12. Overall, this course was excellent 4.5 0.16 11 4.5 3.6 0.36 15 4
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Sprg
Year 2012 2012
Course TE 404 001 TE 205 201
Courses TE 404 TE 205
Title Textile Engineering Analog and Digital
Responses 17 10
Enrolled 28 14
Response Rate 60.71% 71.43%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.1 0.23 17 4.4 4.9 0.1 10 4.4
2. The instructor was receptive to students
outside the classroom 4.5 0.15 17 4.4 5 0 10 4.4
3. The instructor explained material well. 4.5 0.13 17 4 5 0 10 4
4. The instructor was enthusiastic about
teaching the course 4.5 0.15 17 4.5 5 0 10 4.5
5. The instructor was prepared for class 4.4 0.17 17 4.4 4.8 0.13 10 4.4
6. The instructor gave useful feedback. 4.2 0.2 15 4.2 5 0 10 4.2
7. The instructor consistently treated
students with respect 4.5 0.15 17 4.5 4.9 0.1 10 4.5
8. Overall, the instructor was an effective
teacher 4.5 0.13 17 4.2 4.9 0.1 10 4.2
9. The course readings were valuable aids to
learning 3.6 0.34 15 4 5 0 9 4
10. The course assignments were valuable
aids to learning 3.8 0.23 17 4.2 4.9 0.1 10 4.2
11. This course improved my knowledge of
the subject 4.1 0.16 17 4.4 4.9 0.1 10 4.4
12. Overall, this course was excellent 3.4 0.29 17 4 4.9 0.1 10 4
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Sprg Sprg
Year 2012 2012
Course OR 591 001 ISE 589 602
Courses ISE 589, OR 591, TE 589 ISE 589
Title Special Topics in O Special Topics In I
Responses 11 3
Enrolled 28 5
Response Rate 39.29% 60.00%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.5 0.16 11 4.6 4.7 0.33 3 4.6
2. The instructor was receptive to students
outside the classroom 4.6 0.15 11 4.6 4.7 0.33 3 4.6
3. The instructor explained material well. 4.7 0.14 11 4.4 4 1 3 4.4
4. The instructor was enthusiastic about
teaching the course 4.8 0.12 11 4.6 4.7 0.33 3 4.6
5. The instructor was prepared for class 4.7 0.14 11 4.6 4.7 0.33 3 4.6
6. The instructor gave useful feedback. 4.7 0.14 11 4.4 4.3 0.67 3 4.4
7. The instructor consistently treated
students with respect 4.8 0.12 11 4.7 5 0 3 4.7
8. Overall, the instructor was an effective
teacher 4.8 0.12 11 4.5 4.3 0.67 3 4.5
9. The course readings were valuable aids to
learning 4.7 0.14 11 4.4 3.3 1.2 3 4.4
10. The course assignments were valuable
aids to learning 4.8 0.12 11 4.5 4 1 3 4.5
11. This course improved my knowledge of
the subject 4.8 0.12 11 4.6 4.7 0.33 3 4.6
12. Overall, this course was excellent 4.5 0.16 11 4.5 3.7 1.33 3 4.5
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
Term Sprg Fall
Year 2012 2011
Course ISE 589 001 TE 540 001
Courses ISE 589, OR 591, TE 589 TE 440, TE 540
Title Special Topics In I Textile Information
Responses 11 7
Enrolled 28 15
Response Rate 39.29% 46.67%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.5 0.16 11 4.6 4.4 0.43 7 4.3
2. The instructor was receptive to students
outside the classroom 4.6 0.15 11 4.6 4.7 0.18 7 4.3
3. The instructor explained material well. 4.7 0.14 11 4.4 4.6 0.3 7 4.1
4. The instructor was enthusiastic about
teaching the course 4.8 0.12 11 4.6 4.9 0.14 7 4.4
5. The instructor was prepared for class 4.7 0.14 11 4.6 4.7 0.18 7 4.3
6. The instructor gave useful feedback. 4.7 0.14 11 4.4 4.7 0.18 7 4.1
7. The instructor consistently treated
students with respect 4.8 0.12 11 4.7 5 0 7 4.4
8. Overall, the instructor was an effective
teacher 4.8 0.12 11 4.5 4.9 0.14 7 4.1
9. The course readings were valuable aids to
learning 4.7 0.14 11 4.4 4.7 0.18 7 4
10. The course assignments were valuable
aids to learning 4.8 0.12 11 4.5 4.7 0.18 7 4.1
11. This course improved my knowledge of
the subject 4.8 0.12 11 4.6 4.7 0.18 7 4.3
12. Overall, this course was excellent 4.5 0.16 11 4.5 4.7 0.18 7 4
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
ClassEval Results for Rank, Promotion or Tenure
Instr: Jeffrey Joines
Emplid: `000007431
Term Fall Fall
Year 2011 2011
Course TE 440 001 TE 110 001
Courses TE 440, TE 540 TE 110
Title Textile Information Computer-Based Mode
Responses 7 28
Enrolled 15 28
Response Rate 46.67% 100.00%
Q Mean SEM N Dept
Mean SEM N Dept
Mean Mean
1. The instructor stated course
objectives/outcomes 4.4 0.43 7 4.3 4.9 0.09 28 4.3
2. The instructor was receptive to students
outside the classroom 4.7 0.18 7 4.3 4.7 0.18 28 4.3
3. The instructor explained material well. 4.6 0.3 7 4.1 4.8 0.11 28 4.1
4. The instructor was enthusiastic about
teaching the course 4.9 0.14 7 4.4 4.9 0.05 28 4.4
5. The instructor was prepared for class 4.7 0.18 7 4.3 4.9 0.06 27 4.3
6. The instructor gave useful feedback. 4.7 0.18 7 4.1 4.7 0.14 28 4.1
7. The instructor consistently treated
students with respect 5 0 7 4.4 4.9 0.09 28 4.4
8. Overall, the instructor was an effective
teacher 4.9 0.14 7 4.1 4.8 0.15 28 4.1
9. The course readings were valuable aids to
learning 4.7 0.18 7 4 4.4 0.15 28 4
10. The course assignments were valuable
aids to learning 4.7 0.18 7 4.1 4.8 0.09 28 4.1
11. This course improved my knowledge of
the subject 4.7 0.18 7 4.3 4.9 0.06 28 4.3
12. Overall, this course was excellent 4.7 0.18 7 4 4.6 0.16 28 4
Note: "Courses" indicates the piggy-backed and/or crosslisted courses if any,
that have been combined in this report.
Standard Error of the Mean: SEM = SD / sqrt(n)
II.A.2.b. Peer Evaluation Summary I have had four faculty members (Jon Rust, Melissa Pasquinelli, Stephen Michielson, and Renzo Shamey) sit in on my TE
110 class over the past few years to learn the material to become better at modeling with Excel and VBA.
Peer Evaluation: Spring 2010
Class Observation Checklist
Course: _TE 110______ Instructor: __J. Joines____ Date: _Spring, 2010_
“X” your responses to each of the 12 questions and then add comments below the table.
The instructor Ex
trem
ely
Ver
y w
ell
Ad
equ
ate
ly
Ina
deq
ua
tely
No
t a
t all
Fo
otn
ote
#
1 – was well prepared for class X
2 – was knowledgeable about the subject matter X
3 – stated learning objectives and student expectations X
4 - was enthusiastic about the subject matter X
5 – spoke clearly, audibly, and confidently X
6 – used a variety of relevant illustrations/examples X
7 – made effective use of the board and/or visual aids X
8 – asked stimulating and challenging questions X
9 – encouraged and achieved active student involvement X
10 – connected with student’s prerequisite knowledge X
11 – ended lesson with connection to future learning objectives X
12 – treated students impartially and with respect X
Overall rating: __Excellent___________________________________
Strong points of the Teacher (Continue on back if necessary)
Very enthusiastic and energetic. Kept class moving and students involved.
Opportunities for Improving Teaching (Continue on back if necessary)
Several examples were beyond the knowledge of the students and took too long to explain to them what the
problem was, especially on the homeworks. Using examples from high school physics or chemistry would let the
students concentrate on the course material rather than on peripheral material.
Numbered Footnotes (Continue on back if necessary)
Rater(s)_________________________________________________________________
TE 110 is a course dedicated to teaching the students to use Microsoft Excel to solve engineering problems at an
expert level. Although I consider myself an Excel expert, I learned many new things and found the course
personally challenging and useful. The course is designed to be a "learn by doing course" with Dr. Joines and a
teaching assistant guiding the students through the examples. Dr. Joines excels at this.
I observed Dr. Joines teach throughout the Spring, 2010 semester. He was always very well prepared, enthusiastic
and engaging. The course format is unusual since the lecture and laboratory are combined. The students are
required to have a computer and use it throughout the class in order to learn the techniques taught in the course.
Homeworks are extensive and strongly support the class material. Dr. Joines consistently encourages the students
to start early. He uses email and chats to assist the students late into the evening. This fosters great respect and
appreciation for Dr. Joines.
I did note one short-coming in the course, however. Often the homeworks and sometimes the classroom examples
were pulled from material that far exceeded the students' knowledge. This lead the students to spend too much
time trying to figure out what the problem was asking and took away from their learning the skills necessary to
solve the problem. I would suggest simplifying the examples by using material from high school or freshman
physics and chemistry, that the students have already taken or are currently taking. This would help the students
grasp most of the same material and see its immediate usefulness. Increasing the number of problems but
reducing their difficulty would aid the students in learning the skills taught in the course.
Overall, Dr. Joines is an excellent teacher who is strongly dedicated to engaging students in the learning
process. He knows his material extremely well and can solve almost any problem the students present to him, including many arcane problems associated with Microsoft Windows and Excel. The students in his class are totally involved from the minute they walk into class until the leave.
Peer Evaluation: April 2007
Class Observation Checklist
Course: _TE 110___ Instructor: __Dr. Jeffrey Joines__ Date: __4/3/07___
“X” your responses to each of the 12 questions and then add comments below the table.
The instructor Extr
emel
y
Ver
y w
ell
Ad
equ
ate
ly
Inad
equ
ate
ly
Not
at
all
Footn
ote
#
1 – was well prepared for class X
2 – was knowledgeable about the subject matter X
3 – stated learning objectives and student expectations X
4 - was enthusiastic about the subject matter X
5 – spoke clearly, audibly, and confidently X
6 – used a variety of relevant illustrations/examples X
7 – made effective use of the board and/or visual aids X
8 – asked stimulating and challenging questions X
9 – encouraged and achieved active student involvement X
10 – connected with student’s prerequisite knowledge X
11 – ended lesson with connection to future learning
objectives
X
12 – treated students impartially and with respect X
Overall rating: The two reviewers rated him “extremely” in each category and believe Dr. Joines is an outstanding
teacher.
Strong points of the Teacher (Continue on back if necessary)
Dr. Joines has great enthusiasm for the material, excellent rapport with the students and gets the students actively
involved. He uses an excellent mix of PowerPoint slides, silicon chalk, blackboard spontaneity and in-class
demonstration. It’s obvious that he spends a great deal of time preparing his lectures, class materials and in-class
interactions, which are all of the highest quality. Dr. Joines chooses to keep the students focused on the material
and moving them forward at a quick pace. Lastly, his love of teaching is readily apparent to anyone who sits in
his classroom, and his receiving the prestigious NC State Alumni Outstanding Teacher Award in 2006 [check] is
a thoroughly deserved endorsement of Dr. Joines ability as an educator.
Opportunities for Improving Teaching (Continue on back if necessary)
As Dr. Joines is already aware, he has an important and relevant opportunity in regard to eye contact with students
during discussions and lecturing. In the minds of the reviewers (and at least some students), improving eye
contact with students would significantly improve his interaction and rapport with the students, both in and out of
the classroom. The reviewers recommend that Dr. Joines seeks ways to improve in this area.
II.B. Instructional Development
1. Based on TE/ISE 110 inclass labs, developed 15 labs (with Steve Roberts) in the development of a new class (TE/ISE
589) Simulation Modeling with SIMIO in the Spring 2010. We turned those labs into a 25 lab Textbook that was
published by the company. In the first four months we have sold over 1000 copies of the book. We just did a complete
rewrite of the book for the 4th edition of the book. The approach has been heralded by the company and the book is being
used by over 30 universities worldwide. (e.g., NC State University, Christos Alexopolis at Ga Tech, Steve Pare
University of Montreal, Barry Nelson at Northwestern, Idaho State, Oklahoma State, University of Pittsburg, RIT). The
book has been translated to Chinese, Spanish, Italian and Mongolian and is currently going through French and German
translations.
2. Enhanced the Textile Information Systems class (TE440) by using Tablet PC and Silicon Chalk software to perform
inquiry guided learning in Fall of 2008. First class at N.C. State to utilize Silicon Chalk See Student Owned Computing
Forums for more information on the software.
3. Developed the Syllabus for TE 110 Introduction to Engineering Computing. Introduction to Engineering Computing is
designed to replace CSC 116 (Introduction to Computing with Java). It is designed to be an introductory, yet
comprehensive study of computer problem solving and programming. For many engineering disciplines, Microsoft Excel
and Access are two major tools that are often used to solve problems. Many of our students will work for companies
where these tools are widely available. Therefore, developing an understanding of programming within these
environments is a valuable tool. Being able to design and develop visual frontends to these two programs will allow our
students to develop decision supports systems. This course is needed because we are redesigning upper level classes to
utilize Visual Basic for Applications (VBA) for programming to solve systems problems. Computer Science will be
reluctant to teach a similar course owing to the fact that we are focusing on one particular vendor (Microsoft) where the
programming environment is primarily used under the MS Windows program.
Steve Roberts and I developed 25 InClass labs that utilize a case study approach to inquiry guided learning. These ideas
behind the labs have been replicated in several different courses. Some of the labs are being used in BAE 200 and
Columbia.
4. Enhanced Textile Information System (TE440) to use VB.Net and ASP.Net (Fall 2003). First class at N.C. State to offer
programming using the .Net Framework. 4. Developed the first graduate N.C. State class on Evolutionary Optimization
(Spring 2002).
5. Developed and first taught the material in Textile Information Systems (TE440) with P. Grady (Fall 2000).
6. Developed class web page for TE 205 - The webpage contains class notes, syllabus, links to the online homework and
other pertinent links (Spring 2001).
7. Started the first step of taking TE205 online by moving all the homework to be submitted and graded online using
WebAssign with W. Jasper (Spring 2001).
8. Dissemination of Effective Learning Practices
As a firm believer in student-centered as well as inquiry guided learning; I have evolved the information systems design
class (TE 440) from a lecture-based course with once a week computer laboratory to the integration of computers into
every lecture. I will lecture for a short time on a computer topic and then the students are given a task to complete in
class where I can assist them (i.e., Solution-Active Learning). During one lecture period, there might be four to eight of
these lectures and task combined teaching methods. I have termed this kind of learning the "Immediacy Response"
because students get immediate feedback on whether or not they can complete the task before leaving the classroom.
Other times, when questions are asked or students makes suggestions and even if I know the answer or I know their
solution is wrong, I will turn the question into an exercise by saying let’s do it and find out. Students learn from their
mistakes as well as their peers in the classroom before trying to attempt the homework. Now my lectures have evolved
into an inquiry guided learning classroom by having little lectures, well planned in-class assignments that make a point,
and then just responding to "teaching moments" or "Immediacy Responses." Students have remarked how they could not
imagine taking this class without the use of computers. From 2000-2005, the College of Engineering (COE) ran a student
owned computing pilot. In 2006, they switched to a expectation that all incoming engineering students have laptops. I
have been involved with the SOC initiative from its beginning: as a teacher of TE 440 computer information systems for
the past three years, on the SOC committee for helping to make decisions about the laptop carts as well as being
appointed the chair of the SOC committee in 2002 based on use of technology in the classroom. As Chair of Student
Owned Computing (SOC), I have organized the following forums over the past two years to disseminate the use of
computer technology to enhance the undergraduate teaching and learning for our student owned computing initiative.
These forums were intended to give examples of good practices as well as tools that can be used to enhance student
learning. In several instances, I have acted as a speaker at these forums to discuss my experiences in the classroom. The
following is the list of forums I created.
Forum I: Using Computers to Enhance Classroom Learning (Oct 29, 2002) by Carol Miller and Anna Kennedy
Carol Miller will talk about how she has used computers in the classroom for a traditional engineering
computer course while Anna Kennedy will discuss her experiences in using computers and wireless internet in
teaching a non-traditional Spanish for Engineers course. They will show the impact computers in the
classroom had on their teaching, student learning, and the classroom.
Forum II: Active Learning with Technology (November 20, 2002) by Rebecca Brent and Rich
Rebecca Brent and Rich Felder will discuss their perspectives on teaching with technol- ogy. Using laptops in
a classroom requires a teaching pedagogy different from traditional teacher-centered and lectured-based
instruction. They will discuss how active learning with technology can enhance student learning.
Forum III: Technology Tools that Can Be Used in the Classroom (April 23, 2003) by Donna Petherbridge and Jeff
Joines
The spring April 23 forum is a hands-on demonstration of laptop computing tools using our new COE laptop
cart. Participants will learn how a variety of tools (Ask the Audience, Wolfware, WebCT, WebAssign) can be
used in a student-centered classroom with active learning. Throughout the forum, participants will be working
with the tools on laptops from our new laptop cart, made available by ITECS for classroom use. Donna will
discuss Wolfware and WebCT while Jeff will discuss the use of WebAssign and a new student polling
software (Ask the Audience).
Forum IV: The use ofWolfware to enhance learning in the classroom (October 16, 2003) by Elliot
Fisher
Based on feedback from the previous forum, Elliot Fisher from LTS will spend an hour explaining how
Wolfware can be used in and out of the classroom along with the new gradebook.
Forum V: WebCT tools for in-class learning (November 6, 2003) by Elliot Fisher
WebCT is the world's leading provider of integrated e-learning systems for higher education. WebCT's e-
learning systems deliver the most advanced educational technology available to support a full range of
teaching and learning styles, while making the most intelligent and efficient use of an institution's intellectual
and technical resources. Using WebCT allows institutions to provide more personalized learning options for
students, to expand access to academic programs, and to continually improve course and degree program
quality.
Forum VI: Expert Panel Discussion (February 18, 2004) by Lisa Bullard, Anna Kennedy, and Steve Roberts
The next forum will be a panel discussion on using laptops/computers in the classroom to enhance learning.
We will have three panelists who will discuss their experiences and then field questions from the audience.
The three panelists all have different views and experiences.
Panelist 1: Lisa G. Bullard (Chemical Engineering)
Lisa along with Richard Felder taught two sections of CHE 205 lab. In one section, they used student-centered
learning with laptops in the lab while in the other lab they only used student-centered learning techniques.
Lisa will discuss the startup concerns she had in using laptops and then discuss their findings when comparing
student-centered learning with and without technology.
Panelist 2: Anna Kennedy
Anna Kennedy has been teaching in the laptop program for the past two years. She teaches a non-traditional
class (Spanish for engineers). Anna will discuss her success over the past two years and how laptops have
changed her teaching and the learning of the students. She will discuss how she has changed over the past two
years.
Panelist 3: Steve Roberts (Industrial Engineering)
He will discuss his experiences with using computers in the classroom and the evolution that it has taken him.
As he started teaching using computers with just labs to now using it every day in the class room. He will
discuss how it has evolved into giving tests in the classroom using computers and his experiences.
Forum VII: Silicon Chalk Demo (May6, 2004) by Sarah Garriock
Silicon Chalk will allow the user to interact with the faculty by allowing many different things like the ability
to capture sound, add notes to power points as the instructor talks, etc. Silicon Chalk software is used in a face
to face classroom setting where each student has access to a computer - wired/wireless laptop or in a PC lab.
Silicon Chalk facilitates and enhances the activities that are typical in synchronous learning environments:
presentation, discussion, note-taking, feedback, quizzing, collaboration, and more. Faculty can control which
software programs students can and cannot use. At the end of a classroom session each student leaves with a
unique recording including the teacher's presentation and voice combined with the student's personalized
notes. The recordings are portable, fully searchable and can be further annotated during playback or review.
The recordings are great for students who happen to miss a class.
Forum VIII: Lunch Forums during the a two day faculty laptop workshop (August 10 and 11, 2004)
As part of the COE computer committee and the SOC committee, assisted in putting together, a plan has
been forward to expect all engineering undergraduate students to have laptops by 2006. As part of that plan,
it was recommended that faculty have access to laptops as well as software for teaching. So as part of the
plan, a Faculty Pilot was initiated to help faculty obtain and use computers and technology in the
classroom. As part of the pilot, a two day workshop was put together. I organized the teaching pedagogy
portion of the workshops during the 90 minute lunch.
Lunch Forums I: Lisa Butler and Eric Wiebe
They discussed active learning and technology in the classroom and how faculty members can utilize
online simulations, book software, etc. to perform active learning even if the students do not have
computers in the classroom.
Lunch Forums II: Lisa Bullard, Jan Genzer and Jeff Joines
Lisa and Jan talked about the evolution of the CHE curriculum to embrace the use of computers in the
classroom by utilizing the laptop carts to get ready for the students in 2006. I talked about my evolution of
teaching TE 440 computer information systems class from a lecture style with a computer lab portion to an
inquiry guided learning style using computers every day. I demonstrated how student learning is impacted
and improved through active learning and computers.
Forum IX: Using Tablet PCs and Silicon Chalk™ to enhance a technology driven classroom
through inquiry guided learning (Dec 2, 2004) by Jeff Joines
During this semester, I have been experimenting with a Tablet PC as an effective teaching tol as well as
using the Silicon Chalk Software to enhance collaborative learning. This forum will discuss my experiences
as well as demonstrate Silicon Chalk Software while using my Tablet PC to demonstrate a few key points
using our laptop cart over at the College of Textiles. I think Tablet PC can be used as a smart blackboard
and transform the laptop/computer into an inquiry guided learning tool. I will talk about my hybrid
approach using the Tablet PC and keyboard. See comments below line for my feelings of the advantages of
Tablet PCs as a teaching tool. Silicon Chalk software is used in a face to face classroom setting where each
student has access to a computer-wired/ wireless laptop or in a PC lab. Silicon Chalk facilitates and
enhances the activities that are typical in synchronous learning environments: presentation, discussion,
note-taking, feedback, quizzing, collaboration, and more. Faculty can control which software programs
students can and cannot use. At the end of a classroom session each student leaves with a unique recording
including the teacher's presentation and voice combined with the student's personalized notes. The
recordings are portable, fully searchable and can be further annotated during playback or review.
Scholarly Accomplishments
A Courseware
• Developed "Supply Chain Analyzer Game" used in TE 440, TAM 480, TAM 486, T 491H, TT105, IE 401, IE
341, and IE 754. A computerized network game used to demonstrate the dynamics of supply chains through lead
time reduction, sharing of information, better forecasting, etc. During the Fall 2001 semester, the game was used
in IE 401, IE 754, TE 440, T 491H, and every TT 105 class. It was also used during the High School Teachers
Workshop.
• Developed "Manufacturing Cell Design" used in IE 341 and IE 453. A tool that allows one to determine the most
effective manufacturing cells given representative part routings, forecasted demand, and number of redundant
machinery.
• Developed the "Genetic Algorithm Optimization Toolbox (GAOT)" (http://www.ie.ncsu. edu/gaot) which
implements simulated evolution in the Matlab environment using binary, real, and ordered based representations.
The implementation has been used by classes at Auburn and in and at least a dozen master and Ph.D. thesis as
well as used in IE 754, IE 307, TE 589D, and ECE 492Z at N.C. State University. The toolbox was enhanced for
TE 589D during the Spring 2002 semester. Also, I gave a talk on the toolbox at the 2002 IEEE Congress on
Evolutionary Computation.
B. Laboratory Manuals
• Developed the first Textile Engineering Systems Laboratory guide (TE205L) with W. Jasper which is also online
(Spring 2001).
II.C. Mentoring Activities
II.C.1. Undergraduate Students
• Official Undergraduate Faculty Advisees
Academic Year Number of Undergraduate Advisees
2015-2016 28
2014-2015 26
2013-2014 25
2012-2013 24
2011-2012 33
2010-2011 29
2009-2010 23
2008-2009 26
• Faculty Advisor for Textile Engineering Information Systems Design Project (TE 440) where most have an
outside sponsor.
- Six separate TE 440 projects, Fall 2015
- Seven separate TE 440 projects, Fall 2014
- Six separate TE 440 projects, Fall 2013
- Nine separate TE 440 projects, Fall 2012
- Seven separate TE 440 projects, Fall 2011
- Eleven separate TE440/589G projects, Fall 2010
- Eleven separate TE440/589G projects, Fall 2009
- Seven separate TE 440 projects, Fall 2008
- Eight separate TE440 projects, Fall 2007
- Five separate TE440 projects, Fall 2006
- Four separate TE440 projects, Fall 2005
- Four separate TE440 projects, Fall 2004
- Four separate TE440 projects, Fall 2003
- Three separate TE440 projects, Fall 2002
- Five separate TE440 projects, Fall 2001
- E. Ferguson, P. Blomme, R. Hagemann, R. Turlington "Developed a Prototype Web-Database Customer
Service Center for PFG, Inc." College of Textiles, Fall 2000
• Faculty Advisor for Textile Engineering Senior Design Projects (TE 402)
- C. Keenan and Tae Hwang, "Developing a Web-Based Laboratory Management System (LIMs)" Institute
of Textile Technology, Spring 2007.
- A. Wallace and J.Abernathy,"Developing a Project Management System for Johnshon Controls" College of
Textiles, Spring 2005
- N. Debord, C.J. Barnes, and M. Fox,"Developing a Classroom Scheduling System for Shepherds Seminary
" College of Textiles, Spring 2005
- K. McCabe and J. Hunt, “Developing an Online Doctor's Office Patient Tracking System" College of
Textiles, Spring 2004
- M. Jarrett, N. Oconner, and J. Francis, ,"Online Faculty Annual Report System" College of Textiles, Spring
2002
- B. Cummings and D. Franklin, "Online Science Olympia Database System" College of Textiles, Spring
2002
- E. Ferguson and P. Blomme,"Developing an Online Research Costing System" College of Textiles, Spring
2001
II.C.2. Graduate Student Committees
Doctoral Student Advisory Committees: Chair/Co-Chair (Total = 11)
- King, Brandon, PhD TTM, “”, Co-Chair (with Dr. L. Rothenberg), ongoing.
- Shafik, Engy, PhD TTM, “Risk Disruption in Textile Supply Chains”, Co-Chair (with Dr. K. Thoney), ongoing.
- Adikorley, Ruth, PhD TTM, “Sub-Saharan Africa's Competitiveness in the U.S. Apparel”, Co-Chair (with Dr. K.
Thoney), Summer 2016.
- Rezaei,Shaghayegh, PhD TTM, “Market Apparel Recycling: Consumer Behavior and Brand Perspective”, Co-
Chair (with Dr. K. Thoney), Summer 2016.
- Uluskan, Meryem, PhD TTM, “Insights into the Role of Quality in Sourcing Decisions in the Textile and Apparel
Industry” Co-Chair (with Dr. B. Godfrey), December, 2014.
- Sas, Iuri, PhD TTM, “Logistics of Closed-Loop Textile Recycling,” Co-Chair (with Dr. K. Thoney), May, 2013.
- Martin, Ben, PhD TTM, “Inventory Management, Metrics, and Simulation,” Co-Chair (with Dr. K. Thoney),
December 2010.
- Shim, Woosub, PhD FPS, “A diagnostic expert system for the coloration of polyester materials,” Co-Chair (with
Dr. R. Shamey), August, 2009.
- Yoon, Seonghoo, PhD TTM, “The effects of information sharing in a two-stage apparel supply chain using policy
characterization and simulation,” Co-Chair (with Dr. R.E. King), Spring 2008.
- Gokce, Mamut, PhD IE, "Optimization of Sourcing Decisions in Supply Chains," Co-Chair (with Dr. M.G. Kay),
Summer 2002.
- Lertworasirikul, Saowanee, PhD IE, "Fuzzy Data Envelopment Analysis," Co-Chair (with Dr. S.C. Fang), Summer
2002.
Master's Student Advisory Committees: Chair/Co-Chair (Total = 24)
- Lange, Swapnil, MS TE and MS ISE, Co-Chair (with S. Roberts), “”, Summer 2015
- Akshay,Venkitasubramanian, MS ISE, “Object-Oriented Framework for Healthcare Simulation”, Co-Chair (with S.
Roberts), May 2012
- Kodakkat, Nikil, MS OR, “A Heuristic Approach to Maximize Workload Smoothness for an Apparel Production
Line with Work”, Chair, May 2013
- Mantha, Srivili, M IMSE, Chair, May 2013
- Sprately, James, MS T, Co-Chair (with Dr. Thoney), In Progress.
- Maheshwari, Richa, MS T, “An examination of the impact of brand and experiential factors on the acceptance of
apparel e-shopping using a Technology Acceptance Model (TAM) approach,” Co-Chair (with Dr. Moore), May
2010.
- Collier, Jameson Drew, MS TE, “Utilization of Embedded Pressure Sensors in Smart Textile Applications,”Co-
Chair (with Dr. Seyam), 2011.
- Daley, Caitlin, MS TE, “Application of Data Mining Tools for Exploring Data: Yarn Quality Case Study,” Co-
Chair (with Dr. T. Clapp), Fall 2008.
- Woolard, Ryan, MS TE, Co-Chair (with Dr. Thoney), “Logistical Model for Closed Loop Recycling of Textile
Materials”, Spring 2009
- Fillaos, Max, MS T, Co-Chair (with Dr. Thoney), “Developing a Comprehensive Cost Model in Sourcing
Products”, Spring 2009
- Sheek, Susan, MS T, Co-Chair (with Dr. Cassil), “Supply Chain Linkages: Opportunities for the U.S. Textile
Supply Chain”, Spring 2010
- Propst, Michael, MS TE, Chair, “Utilizing Genetic Algorithms and Meta-models for Effective Simulation
Optimization", Fall. 2009.
- Sutton, Kristin, MS TE, Co-Chair (with Dr. T. Clapp), “Systematic Approach for Error Proofing”, Spring 2009.
- Franklin, David, MS TE, “Using the SAS Simulator for Six Sigma Projects”, Spring 2009.
- Jarret, Michael, MS TE, Chair, Spring 2009
- Kauffman, Norman Chris, M IMSE, Chair, “Developing an Interface Sew Line Balancing Simulation,” Spring
2008.
- Rao, Hikhil, M IMSE, Chair. Spring 2008.
- Wagner, April, MS TATM (ITT Fellow), Co-Chair (with Dr. K. Thoney and Dr. G. Hodge), “Plant Floor
Scheduling Systems in a Lean Environment." Spring 2007.
- Goforth, Kelly, MS TATM (ITTFellow), Co-Chair (with Dr. K. Thoney and Dr. G. Hodge), “Adapting Lean
Principles for the Textile Industry,” Spring 2007.
- Hartman, Lisa, MS TATM (ITT Fellow), Co-Chair (with Dr. K. Thoney),"Making Intelligent Sourcing Decisions",
Spring 2006.
- Powell, Elizabeth Erin, MS Textile Apparel Technology Management, Co-Chair (with Dr. N. Cassill), "An analysis
of project management methodology as applied to demand forecasting software implementation within a leading
apparel corporation", Spring 2004.
- Brenzovich, Joe, MS TE, Co-Chair (with Dr. W. Jasper), "Fabric defect detection using a GA tuned wavelet filter"',
Fall 2003
- Natrajan, Vignesh, MS TE, Chair, "Inter-Fiber Competition: Econometric Modeling of U.S. Cotton and Polyester
Fiber Demand", Spring 2003
- Areias, Joao S., MS TE, Co-Chair (with Dr. G. Hodge),"Modeling the Production Planning and Scheduling
Activities and Data in Warp Knitting, Dyeing, and Finishing", Fall 2002
Graduate Student Advisory Committees: Member/Minor Representative (Total = 47)
- Huang, Yung-Yun, PhD Operations Research, In Progress
- Zubair, Muhammad, Phd FPS, In Progress
- De La Fuente, Rodrigo, PhD ISE, July 2016.
- Smith III, Raymond, PhD ISE, May 2016
- Xiao, Ranran, PhD TTM, “An Examination of Apparel Source Countries' Exports among U.S. Retail Channels and
Product,” Dec 2014
- Sawatawarakul, W. FPS, “A Diagnostic Expert System for the Dyeing of Protein Fibers,” Dec 2014.
- Carr, Sean Michal, PhD ISE, Member, “Simulation-based Analysis of Cell-based Regenerative Medicine
Production: Focus on Efficiency”, May 2013.
- Sreepathi, Sreerama Satya Sarat Chandra, PhD Computer Science, Member, “Optimus: A Scalable Parallel
Metaheuristic Optimization Framework With Environmental Engineering Application,” Dec 2012.
- Chaudhry, Hassan, PhD. TTM, “Postponement and Supply Chain Structure,” Member, May 2011.
- Halbur, Johnathan, MS TE, Member, “Co-presence of durable flame retardant and repellent nano-finishes,”May
2010.
- Ashka, Semra, PhD. Industrial and System Engineering, Member, December 2009.
- Cusher, Aaron, PhD. Aerospace Engineering, Member, “A Design and Analysis Approach for Drag Reduction on
Aircraft with Adaptive Lifting Surface”, Fall 2008
- Bucci, Michael, PhD. Industrial and System Engineering, Member, "Meta-heursitics for Location Problems with
Economies of Scale", Spring 2009.
- Kumar, Jitendra, PhD Civil Engineering, Member, “Parallel Evolutionary Computation for Environmental
Management Problems,”, May 2010.
- Tryby, Michael, PhD Civil Engineering, Member, "Evolutionary Computation for Environmental Management
Problems", Fall 2008.
- Ding, Yi, PhD IE, Member, Spring 2008.
- Coley Cheryl, “Factory Visualization with Siemens Totally Integrated Automation Portal and Implementation of
Device Wise at John Deere Turf Care,” March 2016.
- Kulkarni, Yogesh, “Improving the in-house Manufacturing Execution System and utilizing SQL Reporting
Services to generate insights at John Deere Turf Care, M IMSE, March 2016
- Dyer, Gail, “Implementing a Robot in a Thin Glass Sheet Application”, February 2016.
- Milns, Chris, “M IMSE, May 2014.
- Zhu, Yunjia, MS TE, In Progress
- Schwartz, Blake, MS OR, Member “An Evaluation of US Army Special Operations Command's Requirements and
Capabilities Analysis System using Condition Number Analysis and Scaling of Quantized Responses,”, 2013.
- Liu, Xuejing, MS T, Member, “Analysis and Costing of Imports of T-shirts and Jeans into the United States,”,
Summer 2012.
- Deuser, Lauren, MS TE, Member, “Defining the Relationships Between Firefighter Turnout Material Properties
and Performance ,” 2012.
- White, Andrew, MS TE, Member, “RadHand Test for Measuring Thermal Protective Performance of Structural
Firefighting Glove ,” 2102.
- O’cain, Taylor, MS TE, Member, In Progress
- Watkins, Jessica, MS TE, Member, “valuation of Grip and Dexterity Test Methods for Characterization and
Improvement to Structural Firefighting Glove Design,” May 2011.
- Bryant, Jordan, MS IMSEI, Member, May 2012.
- Gourishankar, Mukund, M IMSE, Member, 2011.
- Wood, Jesse, MS TE, Member, “Design for Six Sigma [electronic resource] : design and development of an equine
composite flooring system,”, Spring 2008.
- Tyner, Wade, MS TE (ITT Fellow),Member, "Evaluation of Repellent Finishes Applied by Atmospheric Plasma",
Spring 2007.
- Geuerth-Schacher, Cordul, PhD Fiber Polymer Science, Member, "Evaluation of the Effects of Moisture on the
Thermal Protective Performance of Fire Protective Clothing in Low Level Heat Exposures, Fall 2006.
- Jepson, Jeff, PhD Aerospace Engineering, Member, "Advancements in Aerodyanmic Technologies for Airfoils and
Wings", Fall 2006.
- Love, Kim, MS Textile Engineering, "Six Sigma and Lean Production", In progress.
- Sholeh, A., PhD Industrial Engineering, Member, "Pooled versus Reserved Inventory Policies in a Two-Echelon
Supply Chain" August 2005.
- Zechman, Emily, PhD Civil Engineering, Member, "Improving predictability of simulation models using
evolutionary computation-based methods for model error correction", July 2005
- Villalon, Ada, MS IE, Member, "Electron beam fabrication of injection mold tooling with conformal cooling
channels", May 2005.
- Riego, D., MSIE, Member, "Optimization of Vehicle Routes for a Third Party Logistics Provider", May 2005.
- Jackson, Laura, PhD CSC, Member, "The Directional p-Median Problem with Applications to Traffic Quantization
and Multiprocessor Scheduling", December 2003
- Wang, Shunmin, PhD OR, Member, " Interval computations for fuzzy relational equations and cooperative game
theory", Fall 2002.
- Manninagarajan, Padmanabhan, M.S. TATM, "Rolling Horizon Scheduling", Member, May 2002.
- Melton, Ryan H., MS IE, "Methodology for Furniture Finishing System Capacity Planning," Member, Fall 2000.
- Yagubian, Arman, PhD IE, "Decision support for the kiln scheduling problem in the furniture industry: A local
improvement heuristic approach," Member, Summer 1998.
II.C.3. Mentoring Activities
My major role as the Associate Dept Head and TE program director is to make sure the undergraduate program
moves along smoothly from recruitment, undergraduate curriculum, ABET accreditation as well as assisting faculty.
When I give seminars on teaching to new faculty, one of the things I say is that everything I do may not work for you
or may need to be modified to fit your personality.
As a part of the LITRE grant, I held a one day faculty development workshop (May 18, 2008) on Utilizing Modeling
in Excel for Engineering which was attended by 23 faculty from Industrial and Systems Engineering, Textile
Engineering, and Biological and Agricultural Engineering. The workshop demonstrated how to effectively integrate
computing into the classroom. The goal was to integrate computing into other courses in each of the curricula beyond
the freshman courses. I worked with Mike Burchell from BAE over the Fall 2008 semester to assist him in
redesigning their freshman computing course (BAE 200). I helped him adapt many of my in-class labs to utilize in
his course. The following is qualitative survey assessment summary from the workshop participants.
Rate the workshop (1 - strongly disagree, 2 = disagree, 3 =
agree, 4 = strongly disagree Average
Overall, my expectations were met 3.54
I learned valuable Excel skills 3.62
I plan to use some of the ideas in my own courses 3.44
The workshop was well organized. 3.54
The facilitator did a good job. 3.54
The workshop started and ended on time. 3.42
The food and refreshments were good. 3.46
Rate your confidence (1 = not confident, 2 = somewhat
confident, 3 = confident, 4 = very confident) Average
Moving around the worksheet 3.73
Entering values and formulas 3.73
Applying built-in financial, statistical and math functions 3.55
Using solver 2.91
Performing sensitivity analysis by constructing data tables 2.91
Constructing graphs 3.70
Using pivot tables/charts 2.92
Using named ranges 3.42
I mentor faculty on issues related to all aspects of teaching (e.g., Dr. Jur, Dr. Pasquinelli, Dr. Krause, Dr. Zhang, Dr.
Krause, and Dr. Jasper). I co-taught with Dr. Pasquinelli when she first arrived. We talked after each time to discuss
things that went well and the things to improve. We have the opportunity to talk several times a week on how her
teaching is going which allows me to give advice on dealing with students and handling issues. I helped Dr. Jasper
introduce active learning techniques into his Controls class (TE435) to give the students experience with solving
problems.
Based on my experience using Tablet PCs, I have influenced and mentored several faculty on the use of Tablet PCs
in the classroom (e.g., Lisa Bullard – CHBE, Steve Roberts –ISE, Melissa Pasquinelli – TE, and Wendy Krause –
TE).
Student Mentoring
Undergraduate Researchers
Jiin Son (May 2016 – present)- Working on building a simulation model of the central telemetry of several hospitals as
part of the NIH grant.
Shikha Singh – Worked with her since she was in high school. She was awarded an under-graduate research award. She
is worked on building a simulation model of an emergency room. She attended the international Winter Simulation
conference in December of 2011.
NSF REU – I have had three students (Alison Kerkelo, Brian Foster, and Courtney Musciano) work with me on
developing educational videos for my NSF educational grant (See Research Section for more information), http://moodle.wolfware.ncsu.edu/course/view.php?id=4481
Undergraduate Directed Internships
For several summers including some semesters, I have been working directly with companies on several extremely
important problems with companies. The mechanism was facilitated through what we termed “directed internships” where
an assembled group of students is working in the various companies with a faculty member on an extremely important
problem. As a faculty member, I meet with the students one to two days a week to work with them, get updates on their
progress as well as give guidance on the problem. The team that is assembled is often consists of Textile Engineers as well
as Textile Management students
Sara Lee Intimate Apparel (Statesville, NC), Summer 2002 Laura Hill (TE), Andrew Sutton (TE), and Lalia Gioconomi
(TE)
Goal of the project was to develop a scheduling methodology for their two-plant cutting operations that would allow
them to reduce their lead times of two to three weeks to one or one-half weeks. We were able to deliver a very good
analysis as well as a simplified prototype. An implementation later that year based on our work lead to the realization of
the one week lead timer.
Sara Lee Intimate Apparel (SLIA) (Winston-Salem, NC), May 2002 - October 2003 Michael Jarrett (TE), Erin Powell
(TATM) and James Francis (TE)
At the time, SLIA was carrying large inventories while still not able to meet their service level requirements to their
customers. This project analyzed the current way their setting their target inventories and over the course of two
summers and the support of several graduate students during the semester, a new SKU level inventory model was
developed and implemented to overcome the inefficiencies in their forecasting and planning systems. The SKU level
inventory model is still be used to plan over 30,000 SKUs. They estimate the model has saved them over 13 million
dollars over the past four years. As a result of the first year, they hired one of the undergraduate students (James Francis)
and my Ph.D. student (Ben Martin).
Park Dale Mills (Charlotte, NC), Summer 2003 Andrew Sutton (TE) and Kevin Ross (TE)
The group worked on a six sigma process improvement project to improve the overall quality of their doubled winding
operation.
Duke Energy, ITG, Glen Raven, and Unifi (Burlington, Reidsville, Greensboro, Yadkinville), Summer 2005 Alex
Yockey (TE), Ian Raulstan (TATM), and Reece Allen (TATM)
This was a very unique project since these three textile companies along with Duke Energy pooled their money together
to address three distinct supply chain problems. Unifi supplies yarns to both Glen Raven and ITG. The summer was very
successful in that these three companies shared information among themselves to improve the efficiency of the entire
supply chain from the fiber producers to the customers of ITG and Glen Raven.
An enjoyable part of my service is spent advising and mentoring undergraduate and graduate students. Many of these
undergraduate students are not my official advisees. Owing to my relationship with Industrial and Systems Engineering
(ISE), I help many of the TE Information Systems concentration students get into certain ISE courses. Over the past
eight years, I have acted as the faculty advisor for six different senior design projects in TE 402, assisted with several TE
401 senior design projects and more than 25 TE 440 IS projects. Besides serving on graduate committees, I have
provided opportunities for my students to go and give talks at international conferences to gain experience.
Recent TE 402 Senior Design II Project
(Spring 2007) Chris Keenan and Tae Hwang, “Developing a Web-Based Laboratory Management System (LIMs)
(ITT Sponsor)
TE 401 Senior Design I Projects
(Fall 2007) Developing an Electric Blanket that utilizes conductive polymers rather than wires. I have been assisting
them in determination of the properties of the conductive polymers (resistance, voltage and current produced by a
normal blanket as well as how much current/voltage do you need to produce heat with these fibers).
(Fall 2007) Another group is looking at developing a sensor that will let plant owners know (series of lights) when
they need to water their plants. I am helping them develop the capacitance circuit necessary to perform this task.
TE 440 Projects
The undergraduate projects I have to find and solicit various groups while the Graduate Students were given the
opportunity to find their own project. I meet with most of the teams many times outside of class time to work and discuss
their projects. Several of the projects lead to further work in terms of Senior Design projects, students are hired, and/or
additional paid work from the sponsor.
Development of a Course Scheduling for the College of Textiles to schedule their courses each semester taking into
account time constraints, past semesters, class and lab requirements. Sponsor: College of Textiles (Jon Rust and
Kristin Thoney)
Development of an ITT Information system that will track all journal articles, presentations, proceedings, thesis etc.
created by the ITT fellows or staff as well as ability to search for these items in terms of topics. Sponser: Institute of
Textile Technology (ITT)
Development of an ITT Information system that will track chemical use by their ITT labs. Sponsor: Institute of
Textile Technology (ITT)
Development of Information system that will have the ability to keep track of Instructors and their courses taught or
certified for as well as the schedule of all courses given by Textile Extension. Sponsor: College of Textiles- TexEd
Extension courses often use kits of different learning materials. This information system will keep track of kits, the
instructors who have checked them out as well as which kits need replenishments. Sponsor: College of Textiles-
TexEd
In order to assist the Sri Lanka Textile institution, a student information system is being created to assist in tracking
students, courses taken, etc. Sponsor: Sri Lanka Project
In the Nonwovens Institute, fabric experiments are performed and the left over samples are inventoried at each stage
of the process. There is currently no system in place to track these materials to see if they can be reused for other
projects and therefore, many times the same experiment is performed producing more fabric. The system will keep
track of the material flow process (i.e., different samples have had different process applied to it) and be able to
determine if a fabric exists that has gone through a certain series of processes. Sponsor: Institute
II.D. Master's and Doctoral Theses Directed
See section II.C.2 on page II-33 for all the details in terms of dates and titles of theses that I have chaired or co-chaired.
This information was not repeated to avoid duplication in the dossier.
Degree Completed In-Progress
Chair or Co-Chair Doctoral Students 9 1
Chair or Co-Chair Master Students 24
III. SCHOLARSHIP IN THE REALMS OF FACULTY RESPONSIBILITY
III.A. Scholarly Accomplishments
Google Scholar Index
Refereed Journal Articles Published, In-Press, or Accepted
(1) Iurii Sas, Jeffrey A. Joines, Kristin A. Thoney & Russell E. King (2018) Logistics of carpet recycling in the U.S.:
designing the collection network, The Journal of The Textile Institute, DOI: 10.1080/00405000.2018.1480101
(2) Karen Young, Jeffrey Joines, Trey Standish & Victoria Gallagher (2018) Student evaluations of teaching: the impact
of faculty procedures on response rates, Assessment & Evaluation in Higher Education, DOI:
10.1080/02602938.2018.1467878
(3) Standish, Trey*, Victoria Gallaghar, Jeffrey A. Joines, and Karen Young, (2018), “Improving SET Response Rates:
Synchronous Online Administration as a Tool to Improve Evaluation Quality”, Research in Higher Education.
(4) Adikorley, Ruth, Jeffrey A. Joines, Lori Rothenberg, and Krsitin A. Thoney, (2017), “Apparel sourcing in Sub-
Saharan Africa: views from apparel sourcing executives and trade policy representatives”, Research Journal of Textile
and Apparel, 21 (3), 203-218. 2018 Emerald Literati Awards Outstanding Paper
(5) Uluskan, Meryem*; Godfrey, A. Blanton; and Jeffrey Joines, (2016), Impact of competitive strategy and cost-focus on
global supplier switching (reshore and relocation) decisions”, The Journal of The Textile Institute 108 (8), 1308-1318.
(6) Uluskan, Meryem*, Jeffrey A. Joines, and Godfrey, A. Blanton, (2016), “Integration of Six Sigma to Traditional
Quality Management Theory: An Empirical Study on Organizational Performance.” Total Quality Management &
Business Excellence, 28 (13-14), 1526-1543
(7) D. Chapman and J.A. Joines*, (2016) “Why Should I Fill this Out? Strategies for Increasing Response Rates for Online
End-of -course Evaluations,” International Journal of Teaching and Learning in Higher Education, Vol 29.
(8) Uluskan, M.*, J.A. Joines, and Blanton Godfrey, (2015), “Comprehensive Insight into Supplier Quality and the Impact
of Quality Strategies of Suppliers on Outsourcing Decisions,” Supply Chain Management: An International Journal, 21
(1): 92 -102. Impact Factor 3.902.
(9) Sawatwarakul, Wei, J.A. Joines, and R. Shamey* (2015) “A diagnostic expert system for the dyeing of protein fibres,”
Coloration Technology 131 (5), 389-395.
(10) Michael J. Bucci, Ryan Woolard, Jeffrey Joines*, Kristin Thoney & Russell E. King, “Incorporating economies of
scale into facility location problems in carpet recycling,” The Journal of The Textile Institute, DOI:
10.1080/00405000.2014.890833, 2014.
(11) Sas, Iuri, Russell E. Gorga*, Jeff A. Joines, and Kristen A. Thoney, “Literature review on superhydrophobic self-
cleaning surfaces produced by electrospinning,” J. Polym. Sci. B Polym. Phys. 50 (2012)
(12) Hartman, L. Joines, J.A. *, Thoney, KA. & King, R., The Effect Speed and Replenishment Flexibility has on Overall
Costs of Sourcing Apparel Products, Journal of Textile Institute, 2012.
(13) Hodge, G. *, J. Joines, and K. Thoney, “Adapting Lean Manufacturing Principles to the Textile Industry,” Production
Planning and Control, 2010.
(14) Brent, R, A. Craig, J. Joines*, and D. Raubenheimer, “Integration of Computer Based Problem Solving Into
Engineering Curricula”, 2009, Computers in Engineering Education Journal, 19 (Jan-March).
(15) Joines, J.A. *, C.T. Culbreth and S. Schultz. 2007. The Lumber Procurement and Kiln Scheduling Problem: A Hybrid-
GA Approach Wood and Fiber Science 39(4):628-638.
(16) Jasper, W. *, Joines, J.A., and J. Brezenvich. 2005. Fabric Defect Detection using a GA Trained Wavelet Filter.
Journal of Textile Institute, 95(1): 43-54.
(17) Lada, E.K., N.M. Steiger, J.R.Wilson*, and J.A. Joines, Performance of a Wavelet-Based Spectral Procedure for
Steady-State Simulation Analysis. INFORMS Journal of Computing to appear in 2005.
(18) Steiger, N.M., E.K. Lada, J.R. Wilson*, J.A., Joines, and D. Goldsman. 2005. ASAP3: A Batch Means Procedure for
Steady-state Simulation Analysis. ACM Transactions on Modeling and Computer Simulation (TOMACS) 15(1): 39-73.
(19) Martin, B.*, Clapp, T. and J.A. Joines. 2004. Applying Systems Approach and Ideality to the Supply Chain Bullwhip
Effect. The TRIZ Journal June, 2004.
(20) S. Lertworasirikul*, S-C. Fang, J.A., Joines, and H.L. Nuttle. 2003. Fuzzy BCC Model for Data Envelopment
Analysis. Fuzzy Optimization and Decision Making 2(4): 337-358.
(21) S. Lertworasirikul*, S-C. Fang J.A., Joines, and H.L. Nuttle. 2003. Fuzzy Data Envelopment Analysis (DEA): A
Possibility Approach. Fuzzy Sets and Systems 139(2): 379-394.
(22) T. J. Hodgson*, J. A. Joines and A. R. Yaghubian. 2001. Dry-or-buy decision support for dry kiln scheduling in
furniture production. IIE Transactions 33(4): 131-136.
(23) Melton, R., C.T. Culbreth, J.A., Joines*, and S.D. Roberts. 2002. Design and Analysis of Furniture Finishing Systems.
Forest Products Journal 52(7-8):27-33.
(24) Joines, J. A. *, R. E. King, and C. T. Culbreth. 2000. Moving beyond the parts incidence matrix: Alternative routings
and operations for the cell formation problem. Engineering Valuation and Cost Analysis, Special Issue on Control and
Design of Manufacturing Cells,2:327-348.
(25) Joines, J.A. *, C.R. Houck, and M. G. Kay. 2000. Characterizing search spaces for tabu search and including adaptive
memory into GAs. Journal of the Chinese Institute of Industrial Engineers, Special Issue on Softcomputing in
Industrial Engineering,17(5): 527-536.
(26) Joines, J. A. *, R. E. King, and M. G. Kay. 2000. Utilizing a hybrid genetic search for manufacturing cell design.
Journal of the Chinese Institute of Industrial Engineers, Special Issue on Softcomputing in Industrial Engineering,
17(5):549-564.
(27) Culbreth, C. T. *, T. J. Hodgson, J. A. Joines and A. R. Yaghubian. 1999. Dry kiln scheduling for the furniture
industry. IIE Transactions 31(8),733-738.
(28) Huang, J-C. *, C. T. Culbreth, J.A. Joines, R. E. King, and T. G. Hodgson. 1998. Decision support system for lumber
procurement and dry kiln scheduling. Forest Products Journal 48(9):51-59.
(29) Houck, C. R. *, J. A. Joines*, M. G. Kay, and J.R. Wilson. 1996. Empirical investigation of the benefits of partial
Lamarckianism. Evolutionary Computation 5(1): 31-60.
(30) Houck, C. R., J. A. Joines, and M. G. Kay*. 1996. Comparison of genetic algorithms, random restart, and two-opt
switching for solving large location-allocation problems. Computers and Operations Re- search, Special Issue on
Artificial Intelligence, Evolutionary Programming, and Operations Research, 23(6): 587-596.
(31) Stanfield, P. M. *, J. A. Joines, and R. E. King. 1996. Scheduling arrivals to a production system in a fuzzy
environment. European Journal of Operational Research, 93(1): 75-87.
(32) Joines, J.A. *, R. E. King, and C. T. Culbreth. 1996. Comprehensive review of production-oriented cell formation
techniques. International Journal of Flexible Automation and Integrated Manufacturing 3(3&4): 161-200.
(33) Joines, J. A. *, C. T. Culbreth, and R. E. King. 1996. Manufacturing cell design: An integer programming model
employing genetic algorithms. IIE Transactions 28(1): 69-85.
Refereed Conference Proceedings Articles
(34) Barton, Russell R., J.A. Joines and D.J. Morrice. 2017. History of the Winter Simulation Conference: Period of
Growth, Consolidation, and Innovation (1993-2007). In Proceedings of the 2017 Winter Simulation Conference, ed.,
W. K. V. Chan, A. D'Ambrogio, G. Zacharewicz, N. Mustafee, G. Wainer, and E. Page. 87-99. Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers.
(35) Alexopoulos, C., J.A. Joines and M.E. Kuhl. 2017. History of the Winter Simulation Conference: Modern Period
(2008-2017). In Proceedings of the 2017 Winter Simulation Conference, ed., W. K. V. Chan, A. D'Ambrogio, G.
Zacharewicz, N. Mustafee, G. Wainer, and E. Page. 100-114. Piscataway, New Jersey: Institute of Electrical and
Electronics Engineers.
(36) Rothenberg, Lori, R.A. Adikorley, K. Thoney, and Jeffrey A. Joines, Using Stepwise Regression and Nonparametric
Tests to Analyze the Landed Cost Competitiveness of Producing Apparel in Different Companies, In Proceedings of
the 2017 Joint Statistical Meeting (JSM).
(37) M. Pasquinelli and J.A. Joines, Integrating Computing into Thermodyanmics: Lessons Learned, 2011 American
Society for Engineering Education International Conference, Vancouver, Canada.
(38) A. Craig, J.A. Joines and D. Raubenheimer, Using Computational Tools to Enhance Problem Solving, 2009
American Society for Engineering Education International Conference, Austin, TX.
(http://soa.asee.org/paper/conference/paper-view.cfm?id=10163)
(39) Bullard, L., J.A. Joines, G. Rouskas, and E. Wiebe, Computing Across Curricula: The View of Industry
Leaders, In the proceedings of the 2009 American Society for Engineering Education International Conference,
Austin, TX (http://soa.asee.org/paper/conference/paper-view.cfm?id=10630).
(40) Hartman, L., JA. Joines, K.A. Thoney and R.E.King, Strategict Analysis of Speed and Flexibility in Sourcing Textile
Products, In the proceeding of the 2008 Industrial Simulation Conference, Lyon France, pp 125-133.
(41) Craig, A., J.A. Joines, C. Miller, and G. Rouskas, Computing Across Curricula, In the proceedings of the 2008
American Society for Engineering Education International Conference, Pittsburg, PA
(http://papers.asee.org/conferences/paper-view.cfm?id=7421)
(42) Brent, R., A. Craig, J.A. Joines and D. Raubenheimer. 2008. Integration of Computer Based Problem Solving
Into Engineering Curricula. In the Proceedings of the ASEE International Conference. Pittsburg, PA. .
(http://papers.asee.org/conferences/paper-view.cfm?id=7743)
(43) Bucci, M.G. and M.G. Kay, D.P. Warsing, and J.A. Joines. 2007. A Comparison Meta-Heuristics for Large Scale
Facility Location Problems with Economies of Scale, In the Proceedings of the Industrial Engineering Research
Conference, Nashville Tennessee, pp.
(44) Joines, J.A., S. Roberts, and D. Raubenheimer. 2007. Computer-Based Modeling for Engineers using Excel and
VBA. In the Proceedings of the ASEE International Conference. [Online]
http://www.asee.org/acPapers/code/getPaper.cfm?paperID=13338), Honolulu, Hawaii.
(45) Joines, J.A., Thoney, K, and Kay, M.G. 2006. Supply Chain Multi-Objective Simulation Optimization. In Proceedings
of the 4th International Industrial Simulation Conference. 125-132 Palermo, Italy.
(46) Joines, J.A., Martin, B. and Thoney, K. 2005. Utilizing Simple Spreadsheet Simulators to Develop a Finished Goods
Inventory Model for an Apparel Company. In Proceedings of the 3rd International Industrial Simulation Conference.
417-422. Berlin, Germany.
(47) Joines, J.A., Thoney, K, King, R.E. and T. Hodgson. 2004. A Simulation-Based Scheduling System and Its
Implementation in a Textile Operation. In Proceedings of the 2nd International Industrial Simulation Conference.
Malaga, Spain.
(48) Martin, B.E., Clapp, T.G., and J.A. Joines. 2004. Solving a Real World Inventory Management Problem Using a
Technique for Integrating Ideality with the System Operator. In Proceedings of the 2004 Triz Conference, Italy.
(49) Lada, Emily K., J.R.Wilson, N.M. Steiger and J.A. Joines. 2004. Performance Evaluation of a Wavelet-based
Spectral Method for Steady-state Simulation Analysis. In Proceedings of the 2004 Winter Simulation Conference, ed.,
R.G. Ingalls, M.D. Rossetti, J.S. Smith, and B.A. Peters. 694-702. Piscataway, New Jersey: Institute of Electrical and
Electronics Engineers.
(50) Lada, Emily K., J.R.Wilson, N.M. Steiger and J.A. Joines. 2004. Steady-State Simulation Analysis Using Asap3. In
Proceedings of the 2004 Winter Simulation Conference, ed., R.G. Ingalls, M.D. Rossetti, J.S. Smith, and B.A. Peters.
672-680. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(51) Joines, J.A., Sutton, A, Thoney, K, King, R.E. and T. Hodgson. 2003. Implementing a Simulation-Based Scheduling
System for a Two-Plant Operation. In Proceedings of the 2003 Winter Simulation Conference, ed., S. Chick, P.J.
Sänchez, D. Ferrin, and D.J. Morrice. 1440-1448. Piscataway, New Jersey: Institute of Electrical and Electronics
Engineers.
(52) Jasper W., J. A. Joines, and J. Brenzovich. 2003. Fabric Defect Detection Using a GA Tuned Wavelet Filter. In
Proceedings of the ISCA Conference on Computers and Applications. 345-349.
(53) Joines, J.A. and M.G. Kay. 2002 Hybrid Genetic Algorithms and Random Linkage. 2002 Congress on Evolutionary
Computation, Honolulu, Hi.
(54) J.A., Joines, D. Gupta, A. Gocke, R.E. King, and M.G. Kay. 2002. Supply Chain Multi-objective Simulation
Optimization. In Proceedings of the 2002 Winter Simulation Conference, ed., E.Yücesan, C.-H. Chen, J. L. Snowdon,
and J. M. Charnes. 1306-1314 Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(55) Thoney, K, T. Hodgson, J.A., Joines, and P. Manninagarajan. 2002. Rolling Horizon Scheduling in Large Job Shops.
In Proceedings of the 2002 Winter Simulation Conference, ed., E. Yücesan, C.-H. Chen, J. L. Snowdon, and J. M.
Charnes. 1891-1896 Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(56) S. Lertworasirikul, S-C. Fang, J.A. Joines, and H.L. Nuttle. 2002. A Possibility Approach to Fuzzy Data Envelopment
Analysis. 8th International Conference on Fuzzy Theory and Technology, Durham, N.C.
(57) Melton, R., C.T. Culbreth, J.A. Joines, and S.D. Roberts. 2001. Using Automation for Finishing Room Capacity
Planning. In Proceedings of the 2001 Winter Simulation Conference, ed. B.A. Peters, J.S. Smith, D.J. Medeiros, and
M.W. Rohrer, 959-967. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(58) Joines, J. A. and C.T. Culbreth. 1999. Job Sequencing and Inventory Control for a Parallel Machine Problem: A
Hybrid-GA Approach. In Proceedings of 1999 IEEE Conference on Evolutionary Computation, ed., D. Fogel and Z.
Michalewicz, 579-585. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(59) Joines, J. A. and S. D. Roberts. 1999. Simulation in an object-oriented world. In Proceedings of the 1999 Winter
Simulation Conference, ed. P. Farrington, H. Black Nembhard, D. Sturrock, and J. Evans, 132-140. Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers.
(60) Joines, J. A. and S. D. Roberts. 1998. Fundamentals of object-oriented simulation. In Proceedings of the 1998 Winter
Simulation Conference, ed D. Medeiros, E. Watson, J. Carson, and M. Manivannan. Piscataway, New Jersey: Institute
of Electrical and Electronics Engineers.
(61) Joines, J. A. and S. D. Roberts. 1997. An introduction to object-oriented simulations using C++. In Proceedings of the
1997 Winter Simulation Conference, ed. S. Andradotter, K. Healy, D. Withers, and B. Nelson, 78-85. Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers.
(62) Joines, J. A. and S. D. Roberts. 1996. Design of object-oriented simulations using C++. In Proceedings of the 1996
Winter Simulation Conference, ed. J. M. Charnes, D. J. Morrice, D. T. Bunner, and J. J. Swain, 65-72. Piscataway,
New Jersey: Institute of Electrical and Electronics Engineers.
(63) Joines, J. A. and S. D. Roberts. 1995. Design of object-oriented simulations using C++. In Proceedings of the 1995
Winter Simulation Conference, ed. C. Alexopoulos, K. Kang, W. Lilegdon, and D. Goldsman, 82-92. Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers.
(64) Joines, J. A., R. E. King and C. T. Culbreth. 1995. Manufacturing cell design using an integer-based genetic algorithm.
In Proceedings of 1995 International Conference on Flexible Automation and Integrated Manufacturing, ed., R.
Schraft, W. Sullivan, M. Ahmad, and H. Jacobi, 824-835. New York: Begell House, Inc.
(65) Joines, J. A. and S. D. Roberts. 1994. Design of object-oriented simulations using C++. In Proceedings of the 1994
Winter Simulation Conference, ed. J. D. Tew, S. Manivannan, D. A. Sadowski, and F. Seila, 156-165. Piscataway,
New Jersey: Institute of Electrical and Electronics Engineers.
(66) Joines, J.A. and C.R. Houck. 1994. On the use of non-stationary penalty methods to solve nonlinear constrained
optimization problems with GAs. In Proceedings of 1994 IEEE Conference on Evolutionary Computation, ed. D.
Fogel and Z. Michalewicz, 579-585. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers. (760
citations)
(67) Joines, J.A., K.A. Powell, and S. D. Roberts. 1993. Building object-oriented simulations with C++. In Proceedings of
the 1993 Winter Simulation Conference, ed. G. Evans, M. Mollaghasemi, E. Russell, W. Biles, 79-88. Piscataway,
New Jersey: Institute of Electrical and Electronics Engineers.
(68) Joines, J.A., K.A. Powell, and S. D. Roberts. 1992. Object-oriented modeling and simulation with C++. In
Proceedings of the 1992 Winter Simulation Conference, ed. J. Swain, D. Goldsman, R. Crain, J. Wilson 145-153.
Piscataway, New Jersey: Institute of Electrical and Electronics Engineers.
(69) Joines, J.A. and M.W. White. 1992. Improved generalization using robust cost functions. In Proceedings of the 1992
International Joint Conference on Neural Networks, vol .III, 911-918. Piscataway, New Jersey: Institute of Electrical
and Electronics Engineers.
Refereed Book Chapters
(70) Sas, I., Thoney, K.A., Joines, J.A., King, R.E., and Woolard, R. 2015. Reverse logistics of US carpet recycling.
Sustainable Fashion Supply Chain Management: From Sourcing to Retailing, e.d. T.M. Choi and T.C.E. Chang, 3-30.
Springer.
(71) R. Shamey, W. S Shim and J. A. Joines, Development and Application of Expert Systems in Textile Industry, X. Chen
(Ed.), Modeling and Predicting Textile Behaviour, England: Woodhead Publishing Ltd. (In press), submitted
10/30/2008
(72) S. Lertworasirikul, S-C. Fang, J.A., Joines, and H.L. Nuttle. 2002. Fuzzy Data EnvelopmentAnalysis (DEA): A
Credibility Approach. In Fuzzy Sets based Heuristics for Optimization, eds. J. Verdegay. Physica Verlag.
(73) Joines, J.A. and M.G. Kay. 2002. Utilizing Hybrid GeneticAlgorithms. In Handbook of Evolutionary Optimization,
eds. R. Sarker and X. Yao, 199-227. Boston: Kluwer Academic Publishers.
(74) Joines, J. A., R. E. King, and C. T. Culbreth. 1998. Cell formation using genetic algorithms and applications in North
Carolina furniture industries. In Group Technology and Cellular Manufacturing, ed. N. C. Suresh and J. M. Kay, 153-
169. Boston: Kluwer Academic Publishers.
(75) Joines, J. A. and S. D. Roberts. 1998. Object-oriented simulation. In Handbook of Simulation, ed. J. Banks, 397-428.
New York: John Wiley & Sons.
Refereed Journal Articles in Review
(1) Martin, Ben, Jeffrey A. Joines, Kristin A. Thoney, Inventory Model Development and Implementation in a Large
Textile Apparel Manufacturer, November 2015, Submitted to Supply Chain Management.
Books
(1) J.A. Joines and S.D. Roberts, Simulation Modeling with SIMIO: A Workbook 4th Edition, October 2015 Economy
Version, SIMIO LLC (ISBN: 978-1519333933) (http://www.amazon.com/Simulation-Modeling-SIMIO-Workbook-
Economy/dp/1519333935/ref=sr_1_1?s=books&ie=UTF8&qid=1452982421&sr=1-1
Color Version ISBN: 978-1519142207 (http://www.amazon.com/Simulation-Modeling-SIMIO-Workbook-
4th/dp/151914220X/ref=sr_1_1?s=books&ie=UTF8&qid=1452982721&sr=1-1&keywords=9781519142207)
(2) J.A. Joines and S.D. Roberts, Simulation Modeling with SIMIO: A Workbook 3rd Edition, 2013 Amazon.
(3) J.A. Joines and S.D. Roberts, Simulation Modeling with SIMIO: A Workbook 2nd Edition, 2012 Simio LLC.
(4) J.A. Joines and S.D. Roberts, Simulation Modeling with SIMIO: A Workbook, 2010 Simio LLC, (English Printed
Book ISBN: 978-09829782-2-1, English Electronic Book ISBN: 978-09829782-0-7)
(5) J.A. Joines, S.D. Roberts, Z. Zhou, Simulation Modeling with SIMIO: A Workbook (Chinese Version), 2010 Simio
LLC, (Chinese Translated Book ISBN: ).
(6) J.A. Joines, S.D. Roberts, and J. Otamendi, Simulation Modeling with SIMIO: A Workbook (Spanish Version), 2010
Simio LLC, (Electronic Spanish Translated Book ISBN: ).
(7) J.A. Joines, S.D. Roberts, and , Simulation Modeling with SIMIO: A Workbook (Portuguese Version), 2010 Simio
LLC, (Electronic Spanish Translated Book ISBN: ).
(8) J.A. Joines, S.D. Roberts, and M. Rubio, Simulation Modeling with SIMIO: A Workbook (Italian Version), 2010
Simio LLC, (Electronic Spanish Translated Book ISBN: ).
(9) J.A. Joines, S.D. Roberts, and , Simulation Modeling with SIMIO: A Workbook (Mongolian Version), 2010 Simio
LLC, (Electronic Spanish Translated Book ISBN: ).
Edited Books
(1) N.M. Steiger, M.E. Kuhl, J.A. Joines, and B. Armstrong, Eds., 2005 Winter Simulation Conference, Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers. Norwood, NJ: Ablex Publishing Corp., 2005, (ISBN
forthcoming).
(2) J.A. Joines, R. R. Barton, K. Kang, and P. A. Fishwick, Eds., 2000 Winter Simulation Conference, Piscataway, New
Jersey: Institute of Electrical and Electronics Engineers. Norwood, NJ: Ablex Publishing Corp., 2000, xxiv + 2114
pp (ISBN 0-7803-6579-8).
Nonrefereed Conference Proceedings
(1) Joines, J.A., C.T. Culbreth, and R.E. King. A demand-based hybrid-GA approach for manufacturing cell design. In
Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems ed. N.
Tawara, H. Hwang, W. Xu and M. Gen, 193-196. Kanazawa, Japan, October 1999.
(2) Joines, J.A. and C.T. Culbreth. A hybrid-GA approach for dry-kiln scheduling and inventory control. In Proceedings
of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems ed. N. Tawara, H.
Hwang, W. Xu and M. Gen, 193-196. Kanazawa, Japan, October 1999.
Nonrefereed Articles
(1) Joines, JA. “Simulation and Lean Six Sigma: Part 1 Defining Six Sigma, Success in Simulation,” November 30,
2008 (http://www.simio.biz/blog/2008/11/30/)
(2) Joines, JA, “Simulation and Lean Six Sigma: Part 2 Defining the Role of Simulation, Success in Simulation,”
December 5, 2008 (http://simio.biz/blog/2008/12/)
(3) Joines, JA, “Simulation and Lean Six Sigma: Part 3 Defining Lean and Simulation, Success in Simulation”,
January 9, 2009 (http://simio.biz/blog/2009/02/05/six-sigma-and-simulation-part-3/)
(4) Barnhardt R., Hinestroza J., and J.A. Joines. Control Systems at ITMA 2003. In Journal of Textile and Apparel,
Technology and Management 3(3) Fall 2003.
(5) Joines, J. A. 1995. Review of Finding It on the INTERNET by Paul Gilster, John Wiley & Sons, Inc., New York,
1994. In The Engineering Economist, 40(3): 304-306.
(6) Houck, C.R., J.A. Joines, M.G. Kay. 1995 A genetic algorithm for function optimization: a Matlab implementation
NCSU-IE TR 95 - Sited in Google Scholar by 1293 articles.
Presentations
Every conference paper (see above) was given as a presentation at the conference
Invited Presentations
(1) Joines, J. ,Teaching with Active Learning, NC State New Faculty Orientation, 8/12/15
(2) Joines, J., Overview TECS Department, COT Career Fair, 9/11/2014
(3) Joines, J.,Teaching with Active Learning, NC State New Faculty Orientation, 8/14/14
(4) Joines, J. ,Teaching with Active Learning, NC State New Faculty Orientation, 8/13/13
(5) Jeff Joines, What do Student Evaluations Mean and How to Improve them, CHASS Teaching Round Table
(6) Iuri Sas, J.A. Joines and K Thoney, "Simulation of Closed Loop Reverse Logistic Systems, Winter Simulation
Conference Poster, December 2011.
(7) Sprately, J., J.A. Joines, and K.T. Thoney, “Closed Loop Recylcing of Polyester”, ITT Spring TAC Meeting, Spring
2011.
(8) Joines, J. , Sas, I, and Thoney, K. “Closed Loop Recylcing: NTC Updated”, AATCC International Conference, Atlanta,
GA, May 18 – 20, 2010
(9) Sprately, J., K Thoney and J.A. Joines, "Closed Loop Recycling Systems for Polyester", ITT Spring Tac Meeting,
4/25/2010.
(10) Joines, J.A., Utilizing Student Owned Computing (SOC)- Successes and Pitfalls. March 5, 2010 Faculty Fellow Seminar
Series 2010 Spring, Computing Across Curricula., Raleigh NC (http://www.engr.ncsu.edu/cpath/seminar.php)
(11) Joines, J.A., "Using Monte Carlo Simulation in Six Sigma", Key Note Crystal Ball Symposium (April 21, 2010) , RTP
NC
(12) Joines, K., I. Sas and K. Thoney, "Closed Looped Recycling", NTC Poster Session at the AATCC Technical Textiles
Conference, Greenville SC.
(13) Joines, J.A., Workshop on Computing Technologies Preferences. January 27, 2010. Faculty Fellow Seminar Series 2010
Spring Computing Across Curricula., Raleigh NC (http://www.engr.ncsu.edu/cpath/seminar.php)
(14) Joines, J.A., Roberts, S. and A. Craig, Computer Based Modeling for Systems Engineers using Excel and VBA,
2009 Industrial Engineering Research Conference, June 2nd 2009, Miami Flordia.
(15) Joines, J.A., KA. Thoney and R.E. King, Quantifying Information Sharing in Supply Chains, June 24th, 2008, Autex
2008 World Textile Conference,Biella, Italy.
(16) Shim, W.S, Shamey, R., Joines, J.A (2009, March). Comparison of Expert System's Knowledge Base with Real Experts
for the Coloration of Polyester Material, AATCC International Conference. Myrtle Beach , SC US
(17) Joines, Jeff, Steve Roberts, Diane Raubenheimer and Amy Craig, Special session on Computer Based Modeling
for Engineering, January 14th, 2008. LITRE Expo 2009, Raleigh, NC. (http://litre.ncsu.edu/EXPO.html)
(18) Joines, J.A., Utilizing Student Owned Computing (SOC)- Successes and Pitfalls. September 19, 2008. Faculty
Fellow Seminar Series 2008 Fall, Computing Across Curricula., Raleigh NC
(http://www.engr.ncsu.edu/cpath/seminar.php)
(19) Joines, J.A., Workshop on Computing Technologies Preferences. January 26, 2008. Faculty Fellow Seminar Series
2009 Spring Computing Across Curricula., Raleigh NC (http://www.engr.ncsu.edu/cpath/seminar.php)
(20) Joines, J.A., Utilizing Student Owned Computing (SOC)- Successes and Pitfalls. April 3, 2009. Faculty Fellow
Seminar Series 2009 Spring, Computing Across Curricula., Raleigh NC
(http://www.engr.ncsu.edu/cpath/seminar.php)
(21) Joines, Jeff, Diane Raubenheimer and Amy Craig, How Technology Improves Problem Solving in Engineering,
March 19th, 10th Annual UNC System Teaching and Learning Technology Conference,.2009, Raleigh, NC. l)
(22) Fiallos, M., JA Joines, KA Thoney,"Developing a Comprehensive Cost Model in Sourcing Products", Spring ITT TAC
meeting, April 29th, Raleigh NC
(23) Woolard R., JA Joines, KA Thoney,"Logistical Models for Textile Products", Spring ITT TAC meeting, April 29th,
Raleigh NC
(24) Sheek, S.., N. Cassill, JA Joines,"Supply Chain Linkages: Opportunities for the U.S. Textile Supply Chain", Spring ITT
TAC meeting, April 29th 2008, Raleigh NC
(25) Joines, J.A., Teaching computer-based modeling with Excel and VBA, Student owned computers, and tablet PCs,
June 24th, 2008, Autex 2008 World Textile Conference, Biella, ItalyJoines, Jeff, "Simulation and Six Sigma", 2008
Six Sigma Forum, Durham NC
(26) Joines, J.A., S.R Roberts, and Dianne Raubenheimer, Computer-Based Modeling for Engineers using Excel and
VBA, June 2007 ASEE International Conference, Honolulu, Hi.
(27) Joines, J.A., Using Technology in the Classroom. Nov 28, 2007, Workshop for New Faculty Orientation, NCSU
Conference.
(28) Bucci, M., M. Kay, andJ.A.Joines. Meta-Heuristics for Location Allocation Problems with Economies of Scale. The
INFORMS Annual Meeting, October, 2007, Seattle, WA.
(29) Joines, J.A., Using Computers in the Classroom to Enhance Learning. The Textile Institute Annual Conference,
May 23, 2005 , Raleigh, NC.
(30) Joines, J.A., B. Martin, and K. Thoney. Using a Simple Spreadsheet Simulator to Develop a Finished Goods Inventory
Model, 17th Triennial International Federation of Operational Research Societies Conference, Honolulu, HI July 8-16,
2005.
(31) Joines, J.A., R.E. King, and A. Ali. Application of Simulation Optimization Methodology for Supply Chain Sourcing,
17th Triennial International Federation of Operational Research Societies Conference, Honolulu, HI July 8-16, 2005.
(32) Joines, J.A., Developing a Finished Good Inventory Management Model,FALL Institute of Textile Technology TAC
Meeting, Raleigh, NC, HI November 3, 2004.
(3) Lada, E., WIlson, J, Stegier, N and J. Joines. Performance of a Wavelet-Based Spectral Procedure for Steady-State
Simulation Analysis, 2004 Institute for Operations Research and the Management Sciences Conference, Denver CO,
October 24 2004.
(33) Joines, J.A. and K.Thoney. Implementation of a Simulation-Based Scheduling System for a Two-Plant Textile
Operation, 2004 Institute for Operations Research and the Management Sciences Conference, Denver CO, October 24
2004.
(34) Joines, J.A. Evolution of Teaching with Computers in the Classroom, 2004 Textile Information Users Council
Annual Meeting, Raleigh, NC. April 27, 2004.
(35) Joines, J.A. Using Tablet PCs and Silicon Chalk to enhance a technology driven classroom through inquiry
guided learning. Dec 2, 2004, COE SOC Forum, NC State University.
(36) Joines, J.A. and Thoney, K. Wrap up of the Supply Chain Game , AATCC Spring 2004 Concept 2 Consumer (C2C)
Supply Chain Conference, Raleigh, NC. March 11, 2004.
(37) Joines, J.A. and Thoney, K. Introduction to Supply Chains and the Supply Chain Game , AATCC Spring 2004 Concept 2
Consumer (C2C) Supply Chain Conference, Raleigh, NC. March 10, 2004.
(38) Joines, J.A., Barhnart, R. and J. Hinestroza, Control Systems at ITMA 2003, 2003 Fall ITT Annual Meeting, November
13, 2003
(39) Petherbridge, D. and J.A. Joines Technology Tools that Can Be Used in the Classroom (2003), COE SOC Forum,
NC State University.
(40) Joines, Jeff and King, R.E., Supply Chain Game, Delivering the Goods - Breaking Down Boundaries in the Soft Goods
Global Supply Chain, Industry TC Workshop, Cary, NC. April 2, 2003.
(41) Joines, J.A. Hands On Teaching Approach Using a Matlab GA Toolbox, Education Workshop of the 2002
Congress on Evolutionary Computation, Honolulu, Hi.
Recognized Creative and Professional Achievements
• 2014 – Awarded the INFORMS Distinguished Service Award (International Award) for my dedication and service to the
International Simulation Community over a sustained period. https://www.informs.org/Recognize-
Excellence/Community-Prizes-and-Awards/Simulation-Society/Distinguished-Service-Award
• 2002 Ben Martin and I were selected as one of the professor-student mentor teams to participate in the university-wide
program titled "Preparing the Professoriate" that was sponsored by the Graduate School of North Carolina State
University. Ben sat in on my TE440 class during the Fall 2002 semester as well as taught a few lectures. Afterwards, we
discuss his effectiveness as an instructor and the things I do that may be appropriate for Ben. In the spring 2003 semester,
Ben and I team taught the lecture portion of TE205 by dividing up half of the lectures in order for Ben to learn to be an
effective teacher. Also, I taught the first lab section with Ben assisting and then the roles were reversed during the second
lab. Ben was mentored about the things that I had learned about teaching. We discussed things that worked well for Ben
and things that need improvement. As are result of the year, Ben produced a teaching portfolio that will be used when
applies for jobs.
• 1995 Selected as one of nine professor-student mentor teams to participate in the university-wide program titled
"Preparing the Professoriate" that was sponsored by the Graduate School of North Carolina State University with Rusty
King as my professor mentor. In Fall of 1995, I was assigned the task of teaching "Real-time Control of Manufacturing
Systems" where I redesigned the course to use C++ rather than C.
III.B. Research Contracts and Grants
Total funding received to date is $2,223,430 plus an additional $2,006,000 in gifts from companies with $2,983,084 currently
pending from NSF.
Research Gifts
• NC State University/Hanesbrand, Inc. Strategic Partnership, $1,000,0000, 8/1/2012 – 5/1/2016
- After several years of working with Hanes, I cultivated and Hanes gave the gift to provide student experiences,
research projects, senior projects, etc. They have supported one of my PhD graduates (Iuri Sas) for a project after he
completed his degree before he left take his permanent job as well as another IMSE student. See Section IV for more
information on the partnership and what the impact has been. I also assist researchers.
- 71/2016-6/30/2021 $1,000,000 renewal gift to continue the partnership for the next five years.
• (Fall 2006) LENOVA awarded me a $2800 gift in the form a tablet PC (Thinkpad X60) to continue my work with Tablet
PCs within an engineering curriculum.
• (Fall 2003) HP awarded me a $3200 gift in the form of a Tablet PC to use in teaching courses that are not suited for
laptops (i.e., classes that need to draw and manipulate engineering designs to solve problems like free body diagrams,
graphing and flow charting in programming, labeling and diagramming electrical circuit problems, drawing chemical
compounds and polymers, etc.).
Official Radar Report
Note I took two that were in pending section out and put them in the non-funded category and my new NSF grant that was
submitted January 6th was not currently showing in the pending so I added it manually until it shows up. Also, my five year
NIH grant with Duke University as a lead is $1,249,467 with NC State’s portion $122,489 but only the first and second year
is showing up. Things not included in Radar is my $16,000 NSF REU that was awarded as part of my NSF grant.
External Funding
1999-
0357
Development of a Kiln
Scheduling & Lumber
Procurement Decision Support
System (SA)
Culbreth Jr,
Charles T.
Joines,
Jeffrey A.
Walker,
Steve
Industrial and
Systems
Engineering
Lifestyle
Furnishings
International
$12,146
08/17/1998
through
05/15/1999
2001-
0656
On-Line Atmospheric Plasma
Treatment of Cotton Products
to Modify Moisture Sorption
and Transport
McCord,
Marian G.
Thompson,
Donald B.
Joines,
Jeffrey A.
Biomedical
Engineering Cotton, Inc. $90,945
01/01/2001
through
06/30/2002
2002-
1401
Sara Lee/NCSU Summer
Challlence 2002: Scheduling
of Cutting Operation
Scheduling
Joines,
Jeffrey A.
Clapp,
Timothy G.
Textile
Engineering,
Chemistry &
Science
Sara Lee Intimates $43,149
05/01/2002
through
04/30/2003
2002-
1405
SARA LEE / NCSU
SUMMER CHALLENGE
2002
Joines,
Jeffrey A.
Clapp,
Timothy G.
Textile
Engineering,
Chemistry &
Science
Sara Lee Intimates $103,149
05/01/2002
through
04/30/2003
2003-
1641
Sara Lee/ NCSU Summer
Challenge 2003-Supply Chain
Process Mapping
Joines,
Jeffrey A.
Clapp,
Timothy G.
Textile
Engineering,
Chemistry &
Science
Sara Lee Intimates $55,474
05/01/2003
through
04/30/2004
2007-
1154
CPATH CB: Computing
Across Curricula
Rouskas,
George N.
Bullard, Lisa
G.
Joines,
Jeffrey A.
Computer
Science
National Science
Foundation (NSF) $274,749
07/01/2007
through
09/30/2010
Silverberg,
Lawrence M.
Wiebe, Eric
N.
2014-
0645
Effect Of Monitoring System
Design On Response Time To
Cardiac Arrhythmias
Joines,
Jeffrey A.
Textile
Engineering,
Chemistry &
Science
Duke University
(Prime - National
Institutes of Health
(NIH))
$58,009*
$1,249,467
($122,489)
04/01/2015
through
03/31/2020
2015-
1159
Emn-14-f-s-05 Roll On Core:
Intervention Development To
Mitigate Repeating Film
Impressions From Tape
Joines,
Sharon M.
Joines,
Jeffrey A.
Graphic and
Industrial Design
Eastman Chemical
Company $34,684
01/15/2015
through
07/15/2015
2017-
1566
EMN-15-F-S-04:
Understanding the Impact of
Sea Polymer Removal on final
AVRATM Knit Fabric
Construction.
Barker,
Roger L.
Joines,
Jeffrey A.
Textile
Engineering,
Chemistry &
Science
Eastman Chemical
Company $357,819
04/03/2017
through
10/02/2018
Total external funding: $2,237,582 which includes $16k NSF REU and total NIH Grant *This is for just the first two years of a five year grant with NIH with Duke as the lead for the $1.24 M and NC State
Subcontracted part being $122,489
Internal Funding
0049-
0027 Kiln Scheduling Extensions
Hodgson,
Thom J.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU Furniture
Manufacturing &
Management Center
$13,578
07/01/1996
through
06/30/1997
1997-
1722 Kiln Scheduling Extensions
Hodgson,
Thom J.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU Furniture
Manufacturing &
Management Center
$15,368
07/01/1997
through
06/30/1998
1999-
1551
Kiln Scheduling Support
System
Culbreth Jr,
Charles T.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU Furniture
Manufacturing &
Management Center
$33,699
07/01/1999
through
06/30/2000
2000-
1559
An Interactive Supply Chain
Strategy Tool
King,
Russell E.
Culbreth Jr,
Charles T.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU Furniture
Manufacturing &
Management Center
$33,512
07/01/2000
through
06/30/2001
2001-
1659
Business-to-Business
Collaboration in a Softgoods
E-Supply Chain
King,
Russell E.
Fang, Shu C.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU National
Textile Center
Program
$189,415
05/01/2001
through
04/30/2003
2002-
1802
Business-to-Business
Collaboration in a Softgoods
E-supply Chain
Joines,
Jeffrey A.
King,
Russell E.
Fang, Shu C.
Textile
Engineering,
Chemistry &
Science
NCSU National
Textile Center
Program
$361,189
05/01/2002
through
04/30/2005
Nuttle,
Henry L.
2002-
1822
An Interactive Supply Chain
Strategy Tool
Culbreth Jr,
Charles T.
King,
Russell E.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU Furniture
Manufacturing &
Management Center
$37,089
07/01/2002
through
06/30/2004
2003-
1395
Business-to-Business
Collaboration in a Softgoods…
Joines,
Jeffrey A.
King,
Russell E.
Fang, Shu C.
Nuttle,
Henry L.
Textile
Engineering,
Chemistry &
Science
NCSU National
Textile Center
Program
$0
05/01/2003
through
04/30/2004
2004-
2080
Quantifying the Value of
Information in a Supply Chain
King,
Russell E.
Thoney-
Barletta,
Kristin A.
Hodgson,
Thom J.
Joines,
Jeffrey A.
Industrial and
Systems
Engineering
NCSU National
Textile Center
Program
$504,696
05/01/2004
through
04/30/2007
2006-
0156
Strategic Analysis of Speed
and Flexibility in Sourcing
Textile Products
Joines,
Jeffrey A.
King,
Russell E.
Textile
Engineering,
Chemistry &
Science
NCSU Institute of
Textile Technology $30,000
03/01/2005
through
06/30/2006
2007-
0186
Adapting Lean Principles for
the Textile Industry
Hodge,
George L.
Joines,
Jeffrey A.
Thoney-
Barletta,
Kristin A.
Textile & Apparel,
Technology &
Management
NCSU Institute of
Textile Technology $23,048
07/01/2006
through
06/30/2007
2007-
0190
Plant Floor Scheduling
Systems in a Lean
Environment
Hodge,
George L.
Thoney-
Barletta,
Kristin A.
Joines,
Jeffrey A.
Textile & Apparel,
Technology &
Management
NCSU Institute of
Textile Technology $21,371
07/01/2006
through
06/30/2007
2007-
0230
The Production of
Profitability: Optimization and
Control of Increasingly
Complex Textile Plants
Joines,
Jeffrey A.
Textile
Engineering,
Chemistry &
Science
NCSU Institute of
Textile Technology $15,145
07/01/2006
through
06/30/2007
2008-
1064
Developing a Comprehensive
Cost Model in Sourcing
Products
Joines,
Jeffrey A.
King,
Russell E.
Thoney-
Textile
Engineering,
Chemistry &
Science
NCSU Institute of
Textile Technology $33,743
01/01/2008
through
06/30/2009
Barletta,
Kristin A.
2008-
1066
Supply Chain Linkages:
Opportunities for the U.S.
Textile Supply Chain
Cassill,
Nancy L.
Joines,
Jeffrey A.
Textile & Apparel,
Technology &
Management
NCSU Institute of
Textile Technology $33,747
01/01/2008
through
06/30/2009
2008-
1071
Logistical Model for Closed
Loop Recycling of Textile
Materials
Joines,
Jeffrey A.
King,
Russell E.
Thoney-
Barletta,
Kristin A.
Textile
Engineering,
Chemistry &
Science
NCSU Institute of
Textile Technology $33,427
01/01/2008
through
06/30/2009
2009-
1575
Logistical Models for Closed
Loop Recycling of Apparel
and Technical Textiles
Joines,
Jeffrey A.
Thoney-
Barletta,
Kristin A.
King,
Russell E.
Textile
Engineering,
Chemistry &
Science
NCSU Institute of
Textile Technology $48,514
01/01/2010
through
06/30/2011
2010-
0329
Logistics of Closed Loop
Textile Recycling
Joines,
Jeffrey A.
Thoney-
Barletta,
Kristin A.
King,
Russell E.
O'Neal,
William G.
Textile
Engineering,
Chemistry &
Science
NCSU National
Textile Center
Program
$104,783
05/01/2009
through
07/31/2011
2011-
0052
Logistics of Closed Loop
Textile Recycling: 2nd Year
Joines,
Jeffrey A.
King,
Russell E.
Thoney-
Barletta,
Kristin A.
Textile
Engineering,
Chemistry &
Science
NCSU National
Textile Center
Program
$69,999
05/01/2010
through
04/30/2012
Total internal funding: $1,602,323
Pending Proposals (including pre-proposals)
2016-
Advancing Critical and Creative
Thinking through Institutional
Transformation
Carson, Sue
Joines, Jeffrey A.
Villa-Parish, Anita
Quality Enhancement
Plan
National Science
Foundation (NSF) $2,983,084
Total of pending proposals: $2,983,084
Non-funded Projects
2001-
0839
Parallel Adaptive Evolutionary
Algorithms for Multiobjective
Aerospace Optimization
Gopalarathnam,
Ashok
Mechanical &
Aerospace
Engineering C&G
National Aeronautics &
Space Administration
(NASA)
$470,361
Edwards, Jack R.
Joines, Jeffrey A.
2001-
1437
On-Line Atmospheric Plasma
Treatment of Cotton Products to
Modify Moisture Sorption &
Transport
McCord, Marian
G.
Thompson,
Donald B.
Joines, Jeffrey A.
Biomedical
Engineering Cotton, Inc. $90,945
2002-
0664
Experimental Design and
Infrastructure for Validating the
Performance of Combinatorial
Decision and Optimization
Algorit
Brglez, Franc
Berger, Roger L.
Fathi, Yahya
Joines, Jeffrey A.
Stallmann,
Matthias F.
Computer Science
C&G
National Science
Foundation (NSF) $1,858,479
2002-
1410
Project Hermes: Collaborative
Peer-to-Peer Programming and
Computing
Brglez, Franc
Fathi, Yahya
Joines, Jeffrey A.
Stallmann,
Matthias F.
Computer Science
C&G
National Science
Foundation (NSF) $1,232,138
2005-
1014 Error Proofing Research
Clapp, Timothy
G.
Joines, Jeffrey A.
Textile Engineering,
Chemistry & Science Bank of America $164,721
2008-
1251 Sustainable Fabrics Database
Hodge, George L.
Joines, Jeffrey A.
Thoney-Barletta,
Kristin A.
Textile Engineering,
Chemistry & Science
NCSU Institute of
Textile Technology $29,688
2008-
2400
Costing Model for Yarn
Production
Hodge, George L.
Joines, Jeffrey A.
Thoney-Barletta,
Kristin A.
Textile Engineering,
Chemistry & Science
NCSU Institute of
Textile Technology $29,668
2011-
2664
Threading Computational
Thinking and Problem Solving
Across Engineering Curricula
Joines, Jeffrey A.
Vila-Parrish, Ana
Textile Engineering,
Chemistry & Science
National Science
Foundation (NSF) $199,667
2013-
1901
Bedsore Monitoring and
Prevention System
Seyam,
Abdelfattah M.
Joines, Jeffrey A.
Textile & Apparel,
Technology &
Management
Chancellor's Innovation
Fund (CIF) $73,925
2013-
2050
Flipping the Lean Six Sigma
Classroom
Rothenberg, Lori
Joines, Jeffrey A.
Hunt-Lowery,
Alisa
Textiles Extension
Education for
Economic
Development
(TexED)
NCSU Office of
Extension &
Engagement &
Economic Development
$10,000
Total of non-funded proposals: $4,159,592
Funded Research
• Co-Principal Investigator (with KA. Thoney of TATM), "Logistical Models for Closed Loop Recycling of Apparel
Products, 8/1/09-6/30/11, $33,747 +$15,000 Fellow $48,747 ($16,249).
• Co-Principal Investigator (with Lisa Bullard of CHBE), "REU Grant connected with NSF CPATH-CB:
Computing cross Curricula", Funded by the National Science Foundation, 6/1/09-6/30/11, $16,000
Through a NSF REU grant, two undergraduate students and I developed a series of small videos on
problem solving techniques coupled with tutorials on Excel and VBA to enhance the in-class labs in
TE110. Some students were having difficulties outside of class applying things learned or in subsequent
courses forgetting the material. Initially it seemed they were helping. However, after doing formal
assessment the results were mixed on impact. How we do expect our novice students to reach the same
level of expertise which was gained from years of experience in solving problems? As a result, last
summer, the videos were re-scripted utilizing a student who had just completed the class and my model
based reasoning approach. I constructed a new survey to help really understand the access the impact of the
videos (http://www.surveymonkey.com/s/excelVideos) this fall. Based on the results, the new videos seem
to have had an impact on student learning at least from the student’s perception. The next step will be look
at grade performance, motivation, learning style in conjunction with these results to see what factors are
leading to better understanding and comparing performance to previous semesters. The videos are also
being used by the Industrial and Chemical Engineering programs. Based on the methodology used we have
created specific videos for CHE. http://moodle.wolfware.ncsu.edu/course/view.php?id=4481
• Co-Principal Investigator (with K.A. Thoney of TATM and R.E. King of ISE), "Logistical Model for Closed Loop
Recycling of Textile Materials", funded by the National Textile Center through a grant from the U.S. Commerce
Department, [10/1/09-6/30/12], $314,349 ($104,783).
• Co-Principal Investigator (with N. Cassill of TATM), "Supply Chain Linkages: Opportunities for the U.S. Textile
Supply Chain, 1/1/08-6/30/09, $33,747 +$15,000 Fellow $48,747 ($16,249).
• Co-Principal Investigator (with K.A. Thoney of TATM and R.E. King of ISE), "Developing a Comprehensive Cost
Model in Sourcing Products", Funded by the Institute of Textile Technology, 7/1/06-6/30/07, $33,743 +$15,000
Fellow $48,743 ($16,248).
• Co-Principal Investigator (with K.A. Thoney of TATM and R.E. King of ISE), "Logistical Model for Closed Loop
Recycling of Textile Materials", Funded by the Institute of Textile Technology, 7/1/06-/30/07, $33,427 +$15,000
Fellow $48,427 ($16,132).
• Co-Principal Investigator (with Lisa Bullard of CHBE, Geroge Rouska of CSC, Larry Silverberg of
MAE, and Eric Wiebe of Math Science and Technology Education. ), "CPATH-CB: Computing cross
Curricula", Funded by the National Science Foundation, 7/1/07-6/30/10, $252, 678 ($50,536)
<http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=0722192>
Today's somewhat disjointed approach to discipline-specific computing and generic computer literacy does not
accurately mirror the knowledge, skills, and abilities needed by the engineer in the workplace. Computing in the
workplace is pervasive and involves many complex tools, many approaches to problem solving, strategic decision
making, and synthesis. Knowledge, comprehension and application are no longer enough for one to be labeled highly
competent in computing. Rather, a successful engineer will need a mastery of computing applicable to the higher
level cognitive skills of analysis, synthesis and evaluation, as well. To prepare students for pervasive computing in
the workplace, we must begin to think in terms of pervasive computing in their education. The overarching goals of
this project are to: (1) create a computational thinking thread" in the engineering curriculum that spans from the
freshman to senior years and bridges the divide between freshman year computing and computing in upper-level
classes, and (2) enable students to take computing competency to the next level, where they are able to perform high-
level computing tasks within the context of a discipline. The “Computing Across Curricula” (CAC) community was
modeled in structure after the nationally renowned NC State Campus Writing and Speaking Program (CWSP). We
invited a set of fellows over six different semesters to participate in brown bag lunches and perform an action
research involving computing in their courses or curricula. This was the best part of the grant where we helped
faculty enter the arena of educational research through discussions and presentations. For me, I strategically invited
faculty from the TE program that would allow us to have courses throughout the entire curriculum that would
reinforce the computing skills learned during the freshman and sophomore years.
• Co-Principal Investigator (with Steve Roberts of ISE and Jan Genzer of CHBE), "Computer Based Modeling for Engineering", Funded by the Learning in Technology Rich Environment (LITRE) at NCSU,8/1/07-6/30/09,
$50,000($16,667).
When we developed the new Computer Based Modeling for Engineers course (TE/ISE110), my first goal was to
assess the course and how to make improvements to it. We have been assessing the course for the past five years
with qualitative surveys with the help of the Director of Assessment from Engineering (Dianne Raubenheimer) linked
with student success. See the several papers linked above to see the survey and results. As a result of the project, my
horizons expanded beyond just this class because students seemed to be better at problem solving and whether or not
the skills learned were retained. We are utilizing a model by Wolcott Lynch (http://www.wolcottlynch.com) to assess
a student’s problem solving ability which classifies the student at different levels of the “Development Problem
Solving Process.” I have developed several generic problems that we are asking students in all class standings to
solve to determine a base line and then we will track these students through the curricula who have had TE/ISE 110
and see if students’ abilities change over time based on the class. The problem is an open ended problem. This is
quite exciting as we move through the process.
The LITRE project was ‘scale-out’ and ‘scale-up’ approach. Other departments have expressed interest in
reviewing their introductory computer programming course requirement and implementing a course similar to
ISE/TE 110. We reached out to Civil, Construction and Environmental Engineering (CCEE) and Biological and
Agricultural Engineering (BAE) as the project progresses to solicit their participation. This is the ‘scale-out’ portion
of the proposal. The ‘scale-up’ portion entails linking computational processes and skills across courses in the
curricula. The project has several overarching objectives:
1. Increase the computational and analytical capabilities of students by building upon critical computing concepts
semester after semester in a series of courses in the curriculum (“computational thread”).
2. Develop a repeatable, scalable framework that can be implemented in other departments.
The following table shows (italicized courses) where computational thinking has been embedded into the TE
curriculum for this grant. Using the NSF grant fellows program in the next section, I strategically selected four
faculty to introduce computational thinking into their courses so I could create our thread.
FALL SPRING
Sophomore Courses Sophomore Courses
TE 110: Computer-Based Modeling for Engineers TE 201: Textile Engineering Science –
Fibers
TE 200: Introduction to Polymer Science and Eng. TE 205: Analog and Digital Circuits
Junior Courses Junior Courses
TE 301: Engineering Textiles Structures I: Linear
Assemblies TE 302: Textile Manufacturing
Processes and Assemblies II
TE 303: Thermodynamics for Textile Engineers TE 440: Textile Information Systems
Design
Senior Courses Senior Courses
TE 401: Textile Engineering Design I TE 402: Textile Engineering Design II
TE 463: Polymeric Materials TE 404: Textile Engineering Quality
Improvement
The following figures show the impact TE/ISE 110 has on a student’s problem solving ability. The farther right
towards “Strategic Revisioner” indicates that the students are better at problem solving. The figures from the earlier
work show that students who utilized technology seem to better at problem solving because the technology acts as an
enabler to understand the problem more at freshman level.
The same problem given to students in their senior year which is 2-3 years removed from 110 indicates that students
who took the 110 class were better at problem solving whether they used technology or not and those that used
technology were better than those that were not. This is showing that the students are maintaining their knowledge
because it is being reinforced. All TE students at this point I had 110 already so no comparison could be made.
Technology at this level acts as enhancer giving them the ability to explore what if analysis. We are now looking into
other factors that might impact as well as sampling a larger population in and out of NCSU.
• Co-Principal Investigator (with Chris Moses of ITT), "The Production of Profitability: Optimization and Control of
Increasingly Complex Textile Plants", Funded by the Institute of Textile Technology, 7/1/06-6/30/07, $23,907
+$15,000 Fellow $22,000 ($22,000).
• Co-Principal Investigator (with K.A. Thoney of TATM and G.E. Hodge of TATM ), "Plant Floor Scheduling
Systems in a Lean Environment", Funded by the Institute of Textile Technology, 7/1/06-6/30/07, $23,907 +$15,000
Fellow $38,907 ($12,969).
• Co-Principal Investigator (with K.A. Thoney of TATM and G.E. Hodge of TATM ), "Adapting Lean Priciples for the
Textile Industry", Funded by the Institute of Textile Technology, 7/1/06-6/30/07, $25,963 +$15,000 Fellow $40,963
($13,655).
• Co-Principal Investigator (with Bob Barnhardt of TATM and ITT), "Create and Implement a Modified Business Plant
to Expan ITT's Membership", Funded by the Institute of Textile Technology, 5/15/06- 8/15/06, $16,500 ($8,250).
• Co-Principal Investigator (with Russell E. King of Industrial Engineering ), "Strategic Analysis of Speed and
Flexibility in Sourcing Textile Products", Funded by the Institute of Textile Technology, 7/1/05-6/30/06, $45,000
($22,500).
• Co-Principal Investigator (with Bob Barnhardt and ITT), Supply Chain Summer Research Consortium Project funded
by Duke Energy, ITG, Glen Raven, and Unifi Industries through the Institute of Textile Technology to address three
supply chain projects, 5/15/05-8/05/05, $68,000 ($22,666)
• Co-Principal Investigator (with Wendy Krause and R.E. Gorga), "Using Tablet PCs and Silicon Chalk to enhance a
technology driven classroom through inquiry guided learning,", funded by North Carolina State University as part of
the LITRE Initiative, 7/1/05-6/30/06, $5,500 ($5,500).
• Co-Principal Investigator (with K.A. Thoney of TATM and R.E. King and T.G. Hodgson of Industrial Engineering)
(S04-NS02), "Quantifying the Value of Information Sharing in a Supply Chain," joint project between the Colleges of
Textiles and Engineering at North Carolina State University, funded by the National Textile Center through a grant
from the U.S. Commerce Department, [5/1/04-6/30/07], $533,720 ($133,429).
• Co-Principal Investigator (with T. Clapp), SARA LEE / NCSU Summer Challenge 2003, Supply Chain Process
Improvement, funded by Sara Lee Intimate Apparel, $55,474 ($27,737) 5/1/03-4/30/04. Co-Principal Investigator
(with R.E. King, H.L. Nuttle, and S-C. Fang of Industrial Engineering), "Business-to-Business Collaboration in a
Softgoods E-supply Chain," joint project between the Colleges of Textiles and Engineering at North Carolina State
University, funded by the National Textile Center through a grant from the U.S. Commerce Department, [5/1/01-
4/30/02], $189,415 ($47,354), [5/1/02-4/30/03], $197,225 ($49,306), [5/1/03-4/30/04], $163,964 ($40,991).
• Co-Principal Investigator (with T. Clapp), SARA LEE / NCSU Summer Challenge 2002, Supply Chain Process
Improvement, funded by Sara Lee Intimate Apparel, $43,149 ($21,575) [5/1/02-8/15/02], $60,000 ($30,000)
[8/15/02-5/01/03].
• Co-Principal Investigator (with T. Clapp), SARA LEE / NCSU Summer Challenge 2002, Scheduling the Cutting
Operations, funded by Sara Lee Intimate Apparel, $43,149 ($21,575) 5/1/02-8/15/03. Co-Principal Investigator (with
C.T. Culbreth and R.E. King), "An Interactive Supply Chain Strategy Tool," research grant from the Furniture
Manufacturing and Management Center of North Carolina State University, 7/1/02-6/30/03, $37,089 ($12,545).
• Co-Principal Investigator (with M. McCord and D. Thompson), On-Line Atmospheric Plasma Treat-ment of Cotton
Products to Improve Durability of FR Treatments, funded by Cotton Incorporated, $90,945 ($30,315) [1/1/01-
12/31/01/01], $66,860 ($22,253) [1/1/02-12/31/02]
• Co-Principal Investigator (with C.T. Culbreth), "Supply ChainAnaylzer Game for Furniture Industry," research grant
from the Furniture Manufacturing and Management Center of North Carolina State University, 7/1/99-6/30/00,
$33,699 ($16,850).
• Co-Principal Investigator (with T.J. Hodgson), "Extensions to Kiln Scheduling," research grant from the Furniture
Manufacturing and Management Center of North Carolina State University, 7/1/97- 6/30/98, $15,501 ($7,751).
• Co-Principal Investigator (with T.J. Hodgson), "Extensions to Kiln Scheduling," research grant from the Furniture
Manufacturing and Management Center of North Carolina State University, 7/1/96-6/30/97, $14,642 ($7,321).
III.C. Participation in centers, consortia, institutes, interdisciplinary/multidisciplinary activities
Over my career I have had multiple projects with the Institute of Textile Technology (ITT). I had an
NSF educational grant with collaborators in CHE, MAE, Science Education, and CSC. I work with
many different individuals in Industrial Engineering (Steve Roberts, Shu Cherng Fang, Russell E. King),
Poole College of Management Supply Chain Resource Cooperative (Rob Handfield and Don Warsing).
IV. EXTENSION AND ENGAGEMENT WITH CONSTITUENCIES OUTSIDE THE
UNIVERSITY
IV.A. Accomplishments
IV.A.1. Director of the Hanesbrands/ NC State University Partnership ($2,000,000 Gift)
Owing to my successful work with Hanes for several years and my work in Supply Chain across the university, I started to
discussing/cultivating in 2010 about establishing a more formal presence rather than just one off types of projects. As part of
showing what NC State could do in terms of product development and supply chain. I organized a one day Supply Chain
Workshop (3/2011) where Hanes sent a group of influential personnel (e.g., three Senior Vice Presidents, HR Director, and
Director of Business Analytics). Listening to their needs, I reached out to everyone I thought that could help Hanes. The
following was the Agenda Introductions/Overview of the Day
Supply Chain in College of Textiles Joines/Thoney
NC State Graduate Programs in Supply Chain Hodge
Supply Chain Resource Cooperative /Management Clyde and Handfield
Break Break
Integrated Manufacturing Systems Engineering Institute (IMSEI) Jackson
Tour of Facilities Watson
Catered lunch with other faculty and people
Industrial and Systems Engineering King/Anita
Institute for Advanced Analytics Rappa
Energy Reduction Rees/Terry
Break
Business Analytics in COT Langford/Clapp
Textile Career Planning and Placement Hester
NC State Co-Op Matney
Univ. Career Planning and Placement Rand-Pickett
Engineering Career Fair and Relations Koehler
Wrap Up/Next Steps Everyone
My Role
1. After the workshop, I spent the next eight months working with the university, the Textile Foundation, and Hanesbrands,
Inc. to work out details of the MOU, Gift Agreement, and Master Research Agreement for the $1,000,000 gift. The goal
of the partnership was four fold: Establish a presences of Hanes and Champion brand presence on campus; Develop a
talent acquisition pipeline; Utilize faculty and facilities to assist Hanes in innovating; and Access to consortiums (e.g.,
Supply Chain Resource Cooperative, Advanced Analytics, etc.). In many cases, this partnership was unique and required
a lot of work to work out the deals.
2. Once the agreements were signed in the fall of 2011, I then spent five months working with Centennial Authority, Hanes,
College of Textiles to acquire office space for the Partnership could rent and be able to work with NC State. As the
liaison for the partnership space, I manage the access and affiliate IDs to NC State.
3. Spend 5-10% of my time managing and directing the partnership in the following manners. It is my role to find partners
within the university to help Hanes innovate as well as promote Hanes. From the steering committee that I help organize
and run, Hanes develops project areas they are interested in working on. I help manage the money as well as work on my
own research projects with Hanes.
Impact of Student Class Projects
As part of the talent acquisition, promoting Hanes as well as working on key projects/problems, I have helped promote and
find the following different funded and non-funded class projects, senior design projects, studios, etc. over the first four
years. As seen in the below figure, we have been able to reach across the entire campus. When projects have been successful,
a continued relationship with those organizations and faculty continue. These project have had a huge impact on directing
where Hanes should be working as well as fixing problems. In some cases, HBI has hired the students as full time employees.
TE/TT Senior Design Projects
13 projects
Master of Analytics
Practicum Projects 2 Projects
Materials Science
Engineering2 Project
Industrial Engineering
1 Project
Polymer Color Chemistry6 Projects
Cap Stone / Class Projects
~205 Students
Industrial Design
2 Sponsored Studio
College of Design
College of Textiles
College of Engineering
Supply Chain Resource
Consortium6 Projects
College of ManagementFTM & FTD6 Projects
T 497 10 Projects
Assist CenterECE Senior
Design
Sponsoring Student Events to Promote Hanes Brand
Before the partnership, Hanes was having a hard time to attract top talent. As part of my suggestion, they sponsor many
student events around the university as seen in the figure below. For example, the 2014 and 2014 Polymer camp sponsorship
has allowed us to have an amazing program but keeping the registration fee low (i.e., $45) which gives students of social
economic background the opportunity. Keith Zimmerman and I organize the end of the semester pizza parties as a way to
say thank you to all the students and faculty working on Hanes research and class projects.
Polymer Chemistry & Engineering
Camp
End of the Semester Pizza Party
Freshman Engineering
Design
Materials Engineering
Summer Camp
College of Textiles
College of Engineering
Hanes COT New Student
Cookout
Silver SponsorFashion Week
Sponsoring Student Events
COT Career Fair
EngineeringCareer Fair
Managing the Internship Program
An internship program is the easiest way for employers and students to determine if the company will be a fit for the student
in the long run. Before the partnership, Hanes was never sure if they were going to have budget for interns and then when
they decided it was late in March meaning the best students were already committed. Therefore, I convinced them with the
partnership we should guarantee at least six interns every year. With the student event sponsorship and class projects, the
Hanes interview schedule is completely full with our best students. I work with the Hanes HR Director to hire these students
through the partnership funds and approve their biweekly pay throughout the summer. I also visit Hanes during the summer
and then for the final presentations. Many of these students have been given permanent job offers by Hanes. Some have been
offered to fund their graduate work as well.
Year Number of Interns Majors
2013 6 TE, TT, TT-Design, FTM, Bus
2014 7 3 TE, 1 TE/ISE, TT, FTM, Bus
2015 6 2 TE, 1 FTD, 3 FTM
2016 7 3 TE, 2 FTM, 1 Bus, CHE
Sponsoring Research Projects
Another phase of the partnership is to move beyond the class project to more innovative research which sometimes starts
with the class projects. My role is to make Hanes aware of projects and the based on their needs find partners within the
university that can help. In Fall 2014, I built an RFP site which allowed multiple researchers across the university to see the
project ideas and submit proposals. The following is the current and completed larger research projects with PIs.
Sew Team Simulation Update Project (J. Joines, Textile Engineering, Chemistry and Science)
SKU Rationalization Project (J. Joines, Textile Engineering, Chemistry and Science)
NIR Reflector Project
Bleach Activator Project (Hauser and Hinks, Textile Engineering, Chemistry and Science)
Cationic Cotton Project (Hauser and Hinks, Textile Engineering, Chemistry and Science)
Alternative for Cationized Cotton Phase 1 and 2 (Freeman, Textile Engineering, Chemistry and Science)
Industrial Design Bra closures (S. Joines, Industrial Design)
Breast Motion Simulator (S. Joines, Industrial Design)
Super Critical CO2 Dyeing (Nelson, Textile Engineering, Chemistry and Science)
IV.A.2. Short Course/Workshops for Industry
For the past few years, I have been teaching industrial workshops in our Textile Extension Six Sigma and Master Black
Belt Program. I have developed three week long workshops on Simulation and Six Sigma, Data Management with Excel,
JMP and Minitab, and Simulation with SIMIO. I also teach the Design for Six Sigma workshop as well. I have been
teaching these one week programs for the past eight years (2008 – 2016)
Short Courses
Title Date Program
#
Lect.
#
Labs
#
Days Organizer
Design for Six Sigma
12/2/16-
12/4/16
Master Black
Belt Program 10 6 4 Yes
Design and Innovation with Computer
Simulation
7/13/16-
7/16/16
Master Black
Belt Program
10 6 4 Yes
Design and Innovation with Computer
Simulation
7/14/15-
7/17/15
Master Black
Belt Program
10 6 4 Yes
Simulation Workshop 10/9/2015
2015 Lean Six
Sigma Forum 1 1 1 No
Design for Six Sigma
12/2/13-
12/4/13
Master Black
Belt Program 10 6 4 Yes
Design and Innovation with Computer
Simulation
7/16/13-
7/19/13
Master Black
Belt Program
10 6 4 Yes
Design for Six Sigma 12/2/13-
12/4/13
Master Black
Belt Program
10 6 4 Yes
Design and Innovation with Computer
Simulation
7/10/12-
7/13/12
Master Black
Belt Program 10 6 4 Yes
Simulation and Six Sigma Workshop 8/8/2012
2012 Six
Sigma Forum 1 1 1 No
Simulation and Innovation
7/9/11-
7/14/2011
Master Black
Belt Program 12 12 4 Yes
Design For Six Sigma
3//12 -
3//12 TecEd 6 7 4 Yes
Supply Chain Workshop for Hanes
Brands, Inc. 3/15/2011 2 1 Yes
Supply Chain Workshop for Walmart 11/17/2011 2 1 Yes
Lean Six Sigma (1 Lecture on
Simulation) 4/1/2011 TexED 1 No
Lean Six Sigma (1 Lecture on
Simulation) 8/1/2010 TexED 1 No
Design For Six Sigma 3/1/2011 TexED 4 4 4 Yes
Master Black Program Core (2 days
on Simulation)
5/8/2010-
5/9/2010 TexED 4 4 2 No
Six Sigma and Simulation
7/16/09-
7/19/09
Master Black
Belt Program 10 12 4 Yes
Six Sigma and Simulation
4/26/10
and
4/28/10
Master Black
Belt Program 7 10 2 Yes
Lean Six Sigma (1 Lecture on
Simulation) 2//2010
Six Sigma
Black Belt 1 No
Lean Six Sigma (1 Lecture on
Simulation) 8//2009
Six Sigma
Black Belt 1 No
Simulation and Innovation 7//2009
Master Black
Belt Program 12 12 4 Yes
Data Manipulation and Analysis 11//2008
Master Black
Belt Program 8 6 4 Yes
Simulation and Innovation 7//2008
Master Black
Belt Program 12 12 4 Yes
IV.A.3. Other Accomplishments
• I have had six Institute of Textile Technology projects funded which were directly selected by an industrial
advisory board and worked with companies from the board.
• For several summers including some semesters, I worked directly with companies on several extremely important
problems. The mechanism was facilitated through what we termed "directed internships" where an assembled
group of students is working in the various companies with a faculty member on an extremely important
problem. As a faculty member, I am meeting with the students’ one-two days a week to work as well as give
guidance on the problem. $314,772 of my $1,432,781 has come directly from companies showing my
commitment to making companies in North Carolina more competitive.
- Sara Lee Intimate Apparel (Statesville, NC), Summer 2002
Goal of the project was to develop a scheduling methodology for their two-plant cutting operations that
would allow them to reduce their lead times of two to three weeks to one or one-half weeks. We were able
to deliver a very good analysis as well as a simplified prototype. See item number viii in Section V for
more information on the commercial version they hired us to build and maintain.
- Sara Lee Intimate Apparel (SLIA) (Winston-Salem, NC), May 2002 - October 2003
At the time, SLIA was carrying large inventories while still not able to meet their service level requirements
to their customers. This project analyzed the current way their setting their target inventories and over the
course of two summers and the support of several graduate students during the semester, a new SKU level
inventory model was developed and implemented to overcome the inefficiencies in their forecasting and
planning systems. See item ix in Section V for more information on the project.
- Park Dale Mills (Charlotte, NC), Summer 2003
- Milliken, Summer 2004 (paid as a consultant)
- Duke Energy, ITG, Glen Raven, and Unifi (Burlington, Reidsville, Greensboro, Yadkinville), Summer
2005 This was a very unique project since these three textile companies along with Duke Energy pooled
their money together to address three distinct supply chain problems. Unifi supplies yarns to both Glen
Raven and ITG. The summer was very successful in that these three companies shared information among
themselves to improve the efficiency of the entire supply chain from the fiber producers to the customers of
ITG and Glen Raven
• As a consultant, I was part of a team who delivered a five-day workshop to over 500 Milliken employees on Lean
Manufacturing and Supply Chain Management during April 2003-November 2004. The goal was to get Milliken
to change the way they reward performance based on plant metrics and move to more customer and company
metrics.
• Invited Talks with Industry
(1) Joines, J., Supply Chain Optimization, Welspun, Visti, 10/15/2015..
(2) Joines, J., Supply Chain Optimization, Walmart Visit, 11/12/2014
(3) Joines, J.A. and K.T. Thoney,"Supply Chain in the College", VF Corporation Visit, 10/14/2009
(4) Joines, J.A. Information Engineering/Supply Chain, Polo/Ralph Lauren Visit, College of Textiles,January 14,
2004.
(5) Joines, J.A. Information Technology and Systems Analysis, Burlington Industries Second Visit, College of
Textiles, March 30, 2001.
(6) Joines, J.A. Information Technology and Systems Analysis, Great American Knitting, College of Textiles, March
7, 2001.
(7) Joines, J.A. Information Technology and Systems Analysis, Burlington Industries Visit, College of Textiles,
January 24, 2001.
(8) Joines, J.A. Information Technology and Systems Analysis, Unifi Industries Visit, College of Textiles, December
5, 2000.
IV.B. Program Impacts
With engagement to NC society as part of the mission of NC State University, a good portion of my research has been
devoted to applied research programs directly with companies in NC . The impact has been huge in some cases in making
them more competitive in the global marketplace by reducing lead times and costs. The biggest impact has come with Hanes
Brands formerly Sara Lee Intimate Apparel where the new inventory model has conservatively saved the company millions
of dollars over the years. Hopefully, all of these applied research programs will be able to sustain and grow NC companies.
The other impact these programs have had is in my teaching where I can bring these solutions, problems, and methods back
to the classroom to train the next generation of engineers. These real-world experiences only enhance my teaching by
providing examples of the things I am teaching. Owing to my classes and students, I have been doing training in various
companies.
Topic Company Dates
Computer Simulation Modeling with Crystal Ball Hanesbrands, Inc. 3 Days in June of 2013
Computer Based Modeling with Excel and VBA PGI, Inc. 4 Days in March and May 2014
Statistical Analysis Hanesbrands, Inc. 3 Days in July 2014
Computer Based Modeling with Excel and VBA Hanesbrands, Inc. 4 Days in June 2015
SQL Training Hanesbrands, Inc 2 Days in September 2016
V. TECHNOLOGICAL AND MANAGERIAL INNOVATION
V.A. Knowledge and Technology Transfer Accomplishments
Patent Disclosure 2012, Method for Monitoring Bedridden Patient Movement for Bedsore Prevention,
Jameson Collier, Jeffrey A. Joines, Abdel-Fattah Seyam, NCSU Ref. No. 12-059.
J.A. Joines and S.D. Roberts, Simulation Modeling with SIMIO: A Workbook 4th Edition, October 2015 Economy
Version, SIMIO LLC (ISBN: 978-1519333933) See Section III.A Textbooks for the other editions.
Developed the “Genetic Algorithm Optimization Toolbox (GAOT™)” (http://www.ie.ncsu.edu/gaot) which
implements simulated evolution in the Matlab environment using binary, real, and ordered based representations.
The implementation has been used by classes at Auburn, NCS State and hundreds of master and Ph.D. thesis around
the world. Over 1374 articles have referenced the report outlining the toolbox according to Google Scholar.
Development of the Faculty Annual Reporting System for the TECS since 2008 and the entire college since 2015.
The system downloads all the available data on classes (i.e., number of students, sections, etc.), undergraduate
advisees, special topic classes, all information on proposals submitted, current research projects and current graduate
students. It then generates an individual spreadsheet for each faculty member to fill out all information on research
outcomes, etc. The system then will combine all information and generated the department’s annual report in word
format. The individual excel spreadsheet can also create a word document version for the individual faculty if they
want.
V.B. Program Impacts
Our book is the leading book on the Simulation language SIMIO. It has been used by many industrial companies and over 30
universities. The annual report system has made a huge difference in our department and now the college to collect
efficiently all the information necessary.
VI. SERVICE TO THE UNIVERSITY AND PROFESSIONAL SOCIETIES My service is quite extensive and have highlighted some of it below.
Search Committees
2016
Associate Director of Lean Six Sigma Program, October 2015 – April 2016 (Hired Jeff Blessinger and Tonda).
Associate Director of the Textile Foundation, January 2016 – March 2016 (Hired Michael Ward).
2015
Dean of the College of Textiles, Nov 2014 – December 2015 (Hired David Hinks)
Lean Six Sigma Extension Specialist, July – October 2015, (Failed Search)
Vice Provost for Faculty Affairs, Feb. 2015 – April 2015 (Hired Katherine Stewart)
Executive Assistant, Textile Engineering and Chemistry Science Department, April 2015- June 2015 (Hired Lakisha
Patterson)
Associate Director of Advising, College of Textiles, October 2015 – January 2016 (Hired Heather Lyerly)
Associate Director of the Textile Foundation, June 2015 – September 2015 (Failed Search)
2014
Lean Six Sigma Extension Specialist (Hired Brian Smith)
2013
Lean Six Sigma Extension Specialist (Hired Gary Ward)
Associate Director of Advising, College of Textiles, (Hired Tremain Brittain)
2012
Department Head, TATM – (Two year search) (Hired Karen Leonas)
Executive Assistant, Textile Engineering and Chemistry Science Department, (Hired Amanda Padbury)
2010
Executive Assistant, Textile Engineering and Chemistry Science Department, (Hired Catherine)
2009
Lab Manager, (Hired Nygen)
2008
Department Head, TECS – (Hired Jon Rust)
College of Textiles Service
Department Head for Textile Engineering, Chemistry, and Science (Jan 2017 – present)
Associated Department Head for Undergraduate Programs (2008-2017) -In this role, I am in charge of all student
recruitment and retention of students. I led the department in revising all three program curricula in the new GEP
implementation plus many other curricula changes over the years. I assist faculty with utilizing learning management
systems and teaching pedagogy in the classroom. I also advise undergraduate students in all three programs. I have
written an Advising FAQ to assist our faculty in advising and mentoring undergraduates. This has been shared with the
Chemical Engineering Department, Industrial Systems Engineering, and with Cindy Istook who is my counterpart in the
Textile Apparel Technology Management (TATM) Department. I am also in charge of scheduling classes each semester
for our department and working with the TATM scheduler as well. I work with our Director of admissions and advising,
to go through all TE applications to CODA into TE or TT. I work hand in hand with Director of Student Services on
recruitment of TECS students and finding jobs and internships for our students. To assist the department head in
collecting the annual reports and then generating our departmental report, I created and run our Faculty Annual Reporting
System. The system automatically downloads all the classes including the number of students, the number of advisees,
graduate students, active research grants and proposals and then creates an Excel spreadsheet for each faculty member to
fill out all the other information. The individual excel document will create a word document version for the faculty.
Once the faculty have filled out their individual spreadsheets, my system collects all the information into a master
database. It then generates word documents on all the activities of the department over the year. When our new Dean
started, the other department adopted my system which I help perform these duties for them aiding Kristin Thoney who
manages it for her department.
Chair of the College of Textiles Course and Curriculum Committee (July 2009-June 2010; July 2015-Dec 2016)
I am very proud that as chair (09-10), I shepherded a very contentious brand new undergraduate degree program (Fashion
and Textile Design) through the entire process in our college. The package was a very large document (>250 pages) that
included the development of 14 new undergraduate courses. As a chair of committee, I kept the process rolling, critical
reviewing the entire package and not allowing anything to be accepted that did not meet the right criteria. As a result, the
package went through UCCC on the first pass with only a few minor changes. As chair, I felt I handled the difficult issues
between the committee members by letting everyone’s voice be heard and then developing win-win solutions. It was
important that I communicated with all members outside to get sense of what they were thinking before going to the
meetings. In many instances, I pushed the package back to the department to be fixed and updated.
Textile Engineering Program Director (2006-2008) - As TE Program Director, I have led the curriculum through the
latest restructuring that included working with other faculty to develop new or update current courses (TE 200) Based on
my LITRE and NSF educational grants, I am reshaped the curriculum to utilize computing throughout the program by
helping to make changes to existing courses by introducing assignments, lectures, and projects. I feel the introductory
modeling course is providing the students with a skill set that can be used well beyond NC State. Most of my leadership
has been directed towards teaching and learning within the program which includes a large recruitment effort which is
paying off with an increase in undergraduate students.
Polymer Engineering and Chemistry Camp Co-Director with Russell Gorga (2006-present)- This is a two day high school
summer camp that we utilize for recruitment. Russell and I developed and have run the camp for the past seven years. The
last few summers we have had over 40 rising junior and senior high school students. Requires reading and accepting
applicants, organizing the faculty and staff to put on the camp, ordering and buying all the food and snacks for the camp.
The college went through a restructuring of space in 2013, I had a vision of an inquiry guided class room (SCALE-up) that
had round tables and screens on all four sides to make it easy to lead discussion and active learning. Even though, the
concept was foreign and people said only I want to teach this way, I designed the room and convinced leadership to build
this world class teaching environment. The classroom is completely full the last two semesters with people saying it forced
me to change the way I teach and even graduate students are talking in my classroom now.
College of Textile Recruitment
- Created and maintain the three undergraduate fact sheets for PCC, TE, TT.
- Participated in the College of Textile Open House, 2001-2015. In 2004 - 2010, I organized all of the TE information
(i.e., recruiting faculty, gathering examples, printing/copying TE literature on concentrations, and created a version
of the new brochure that could be copied for handout. .
- Created the Textile Engineering Recruitment brochure with the help of Dr. Krause Fall 2003, Spring 2004. Please
see http://www.te.ncsu.edu/brochure/te.pdf for an online version. In 2012, I helped to create the new version in
spring of 2012.
- To better sale the Textile Engineering program at events, I designed and developed a series of three Jiffy Screen
Banners (32" by 96") to be used during the three Open Houses, visitations, etc. based on our Textile Engineering
Brochure. In 2013, Dr. Zhang and I led the redesign of the current the banners.
- Developed the combined TE/CHE dual degree with Lisa Bullard (CHE) 2002.
- Interviewer for the final round of the Textile Scholarships, 2002-2016.
- Host and/or meet with several different groups of parents/students every semester 25 in 2016.
- Developed and delivered the computer information system project for the undergraduate High School Textile
Exploration Program, Computer Science Project, Four Weeks Summer 2001 and 2002, one week 2004, and two
weeks 2005.
- Participated in the College of Engineering Open House, 2001 -2015 except 2009.
- High School Teacher's Workshop, Gave Supply Chain Management Lecture and developed/delivered two
Electronic Circuits Labs, June, 2001, 2002, 2003. Owing to the popularity of my labs, I have had to offer two
session of each lab in 2003 and analog lab in 2001 and 2002.
- Helped and assisted students during freshman summer orientation (2003 - Present).
- Designed and created the TECS computer information teaching lab which provides the department with a computer
teaching facility, 2001-2002
- Member, College of Textile Computer Infrastructure Committee on Student Owned Computing, March 2001-
present. Developed the student owned computing pilot program.
Member, College of Textile World Wide Web Committee, August 2000-present.
- IAB for TE/TT Senior Design Program
College of Engineering Service
Member of the COE Open House Committee
Member, College of Engineering Computer Committee, August 2000-present.
Chair, College of Engineering Committee on Student Owned Computing, August 2002-2008.
Member, College of Engineering World Wide Web Committee, August 1998-2008
LITRE Advisory Board (2004- 2010) - Member of the Learning in a Technology Rich Environment (LITRE) advisory
board program aimed at enhancing the extensive learning with technology opportunities available to students and faculty
at NC State.
Student Owned Computing (SOC) Chair (2002-2008) - For six years, the College of Engineering (COE) ran a student
owned computing pilot. I have been involved with the SOC initiative from its beginning: as a teacher of TE 440, on the
SOC committee for helping to make decisions as well as the chair of the SOC committee since 2002. As Chair, I have
organized and participated in a series of 14 forums (see Section B-13 for the sample list) over several years to
disseminate the use of computer technology to enhance the undergraduate education. These forums were intended to give
examples of good practices as well as tools that can be used to enhance student learning to encourage more faculty to
start to integrate technology/computing into the classroom.
University-Wide Service
Member of Council on Undergraduate Education (CUE) (August 2015 – present)
Chair of the University Evaluation on Teaching (August 2012-May 2015) –I was asked to chair the committee for
three years to continue the momentum we created during my first two years. Under my leadership, the committee
addressed some very touchy issues of improving response rates of student evaluations as well as addressing peer
review of teaching. Owing to the great work from the committee (see final report
https://committees.provost.ncsu.edu/evaluation-teaching/wp-
content/uploads/sites/9/2016/06/EOTAnnualReport2014-15.pdf and https://committees.provost.ncsu.edu/evaluation-teaching/wp-
content/uploads/sites/9/2016/06/EvaluationofTeachingCommitteeReport2013-14.pdf), I have given presentations on
our recommendations to the University’s Dean’s Council in July 2013, update in September 2014, and to several
Associated Deans Meetings and Faculty Senate subcommittees.
i. In an effort to help faculty increase response rates legally, I created with the help of the OFD a Common Myths,
Concerns and Improvement FAQ which is attached on the last page of this section
(https://ofd.ncsu.edu/wordpress/wp-content/uploads/2016/04/ClassEvalFAQ.pdf As a result, we have been
sending this out to the all those teaching at NC State. Most of the recommendations demonstrate caring of the
faculty member.
ii. As part of improving student learning, I am proponent of mid-semester evaluations which I having the committee
as their faculty to do. After sending out my evaluation to the College of Textiles, several faculty thanked me for
the idea as they had either not done one before or it had been a while. They commented on the great results and
feedback from the students.
iii. Under my leadership, I led the recommendation to improve the current ClassEval tool by allowing students to
update and edit their evaluations, make the tool mobile friendly, and allow the photo of the instructor to be
displayed. The first two have been were implemented in the Fall 2013. We are hoping that over time this will
allow responses rates to increase which will lead to better teaching and student learning.
iv. I revamped the policy on Peer Review for the entire university.
v. In my third year as chair, I led the development of a new peer review summary template which allows
departments to use what every protocol they would like to use but will summarize the results using the template.
This will standardize the reporting across the university the summary of peer review as well as help those
departments who do not have peer review process. See the report above to see the template and explanation.
Member of the Evaluation on Teaching Committee (August 2010 – May 2015)
Member of the Learning in a Technology Rich Environment (LITRE) Advisory Board, August, 2004 - 2010.
NC State Alumni Outstanding Teacher Selection Committee, 2013, 2014, and 2015.
NC State Alumni Distinguished Undergraduate Professor Selection Committee, 2013, 2014, and 2015.
Gertrude Cox Award for Innovative Excellence in Teaching and Learning with Technology Selection Committee,
2010, 2011, 2012, 2013, and 2014.
Board of Governors Excellence in Teaching Selection Committee, 2012.
Textile Technology Management Steering Committee (August 2004 – present)
I was asked to meet with the SACS accreditation team visit on March 23, 2004. I gave a five minute presentation on
the student owned computing initiative on the campus.
March 2016, Provost asked me to meet with the new president (President Spelling) of the UNC System to represent
the faculty.
National and International Service
2009 – present, Appointed to Winter Simulation board as the IEEE/SMC representative for a minimum of an eight
year term which oversees the details of the conference as the committees change from year to year.
Winter Simulation Conference Online Submission and Database Technical Coordinator. I developed as well as
maintained the online management system the conference used from 2000 to 2010. The management allowed
papers to be submitted electronically as well as automatically converted to pdf if necessary to make it easier to
review. The system allowed many people to manage the conference by assigning papers to tracks, allowing papers to
be reviewed and then accepting or rejecting the paper. Then the tool was used to create the program by assigning
papers to sessions and sessions to certain rooms. Our printer downloaded complete versions of the author index,
table of contents, program, etc. which cut our costs dramatically. The preliminary and final program are dynamically
created from the database and allowed participants access to the information.
Track Chair Coordinator Winter Simulation Conference 2008, 11, 12, 16, and 18.
Program Chair, 2005 Winter Simulation Conference. It was an honor being selected to hold this position in a very
large conference as young assistant professor. The 2005 conference was the largest conference in history by 20
percent based on papers (335) at the time. The success of the conference has been contributed to my new redesign of
the conference web site (www.wintersim.org), the new mini-tracks I introduced and new types of advertisement.
Workshops Chair, 2000 Congress on Evolutionary Computation, San Diego, CA July 11-14, 2000.
Co-chair of the Evolutionary Education Workshop Chair (with X Yao), 2000 Congress on Evolutionary
Computation, San Diego, CA July 11-14, 2000.
Co-Proceedings Editor, Proceedings of the 2000 Winter Simulation Conference, Orlando Fl, December 10-13, 2000.
Technical committee member for the 2000 GT/CM Symposium, San Juan, PR, March 26-28, 20