j&j medical devices - reference chart...3sd-100-g1 3 mm diamond ball, 100/120 grit, standard...
TRANSCRIPT
FLU
TED
BA
LL
1SB
1 m
m F
lute
d B
all
•15
SB1.
5 m
m F
lute
d B
all
•2S
B2
mm
Flu
ted
Bal
l•
••
25SB
2.5
mm
Flu
ted
Bal
l•
3SB
3 m
m F
lute
d B
all
••
•
DIA
MO
ND
BA
LL
05S
D0.
5 m
m D
iam
on
d B
all
•0
8SD
0.8
mm
Dia
mo
nd
Bal
l•
15SD
1.5
mm
Dia
mo
nd
Bal
l•
•2S
D2
mm
Dia
mo
nd
Bal
l•
••
3SD
3 m
m D
iam
on
d B
all
••
•4
D4
mm
Dia
mo
nd
Bal
l•
••
4D
C4
mm
Co
arse
Dia
mo
nd
Bal
l•
Mat
chst
ick
8N
-18
1.8
mm
Flu
ted
Mat
chst
ick
••
•8
N2.
3 m
m F
lute
d M
atch
stic
k•
••
8N
S3
mm
Flu
ted
Mat
chst
ick
••
•8
NSD
C3
mm
Co
arse
Dia
mo
nd
Mat
chst
ick
••
•
Com
bine
the
pre
fix
and
suffi
x fr
om
the
char
t b
elow
to
det
erm
ine
the
diss
ecti
on t
ool
Cat
alo
g N
umb
er.
Exam
ple:
MA
10-1
SB
Cat
alo
g N
um
ber
Suffi
xC
atal
og
Nu
mb
erPr
efix
AT
TAC
HM
ENT
TY
PE
MA1
0-MA1
5-MA1
9-
MA-1
0S, M
A-10C
MA-1
5S, M
A-15C
, MA-1
5ST
MA-1
9ST
Min
imal
Acc
ess
Att
ach
men
ts
Manufacturer The Anspach Effort, Inc.4500 Riverside DrivePalm Beach Gardens, FL 33410USATo Order (USA): (800) 327-6887To Order (Canada): (855) 946-8999
www.depuysynthes.com
EC REP Synthes GmbHEimattstrasse 34436 OberdorfSwitzerlandTel: +41 61 965 61 11Fax: +41 61 965 66 00
Anspach® Power Tools
G1 Dissection Tools Reference Chart
Limited Warranty and Disclaimer: DePuy Synthes products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.
Please also refer to the package insert(s) or other labeling associated with the devices identified in this brochure.
CAUTION: Federal Law restricts these devices to sale by or on the order of a physician.
Some devices listed in this brochure may not have been licensed in accordance with Canadian law and may not be for sale in Canada. Please contact your sales consultant for items approved for sale in Canada.
Not all products may currently be available in all markets.
© DePuy Synthes 2015–2016. All rights reserved.DSUS/PWT/0415/0113(1) 11/16 CS
FLUTED BALL
05B-G1 0.5 mm Fluted Ball, Extended Length •1B-G1 1 mm Fluted Ball, Extended Length • •1SB-G1 1 mm Fluted Ball, Standard Length • • •15B-G1 1.5 mm Fluted Ball, Extended Length •15SB-G1 1.5 mm Fluted Ball, Standard Length •2B-G1 2 mm Fluted Ball, Extended Length • •2SB-G1 2 mm Fluted Ball, Standard Length • • •2SBT-G1 2 mm Fluted Ball, Tapered, Standard Length •25B-G1 2.5 mm Fluted Ball, Extended Length •25SB-G1 2.5 mm Fluted Ball, Standard Length •3SB-2-G1 3 mm Fluted Ball •3B-G1 3 mm Fluted Ball, Extended Length • •3SB-G1 3 mm Fluted Ball, Standard Length • • • • • •3SBT-G1 3 mm Fluted Ball, Tapered, Standard Length •35B-G1 3.5 mm Fluted Ball, Extended Length •35SB-G1 3.5 mm Fluted Ball, Standard Length •4B-27-G1 4 mm Fluted Ball •4BT-G1 4 mm Fluted Ball, Tapered •4B-G1 4 mm Fluted Ball • • • • • •5B-12F-G1 5 mm Fluted Ball, 12 Flutes • •5B-2-G1 5 mm Fluted Ball • •5B-27-G1 5 mm Fluted Ball •5B-A-G1 5 mm Fluted Ball, Less Aggressive •5B-G1 5 mm Fluted Ball • • • • • •6B-G1 6 mm Fluted Ball • • • • • • • •7B-G1 7 mm Fluted Ball • • • • • • •8B-G1 8 mm Fluted Ball •9B-G1 9 mm Fluted Ball • • • •
CARBIDE FLUTED BALL
1B-C-G1 1 mm Carbide Fluted Ball, Extended Length •1SB-C-G1 1 mm Carbide Fluted Ball, Standard Length •2B-C-G1 2 mm Carbide Fluted Ball, Extended Length •2SB-C-G1 2 mm Carbide Fluted Ball, Standard Length •2SB-C-8F-G1 2 mm Carbide Fluted Ball, Standard, 8 Flutes •3B-C-G1 3 mm Carbide Fluted Ball, Extended Length •3SB-C-G1 3 mm Carbide Fluted Ball, Standard Length •4B-C-10F-G1 4 mm Carbide Fluted Ball, 10 Flutes. •4BL-C-G1 4 mm Carbide Fluted Ball •4B-C-G1 4 mm Carbide Fluted Ball • •5B-C-10F-G1 5 mm Carbide Fluted Ball, 10 Flutes •5B-C-G1 5 mm Carbide Fluted Ball • • •6B-C-G1 6 mm Carbide Fluted Ball • •7B-C-14F-G1 7 mm Carbide Fluted Ball, 14 Flutes •7B-C-G1 7 mm Carbide Fluted Ball •
DIAMOND BALL
05D-G1 0.5 mm Diamond Ball, Extended Length • •05SD-G1 0.5 mm Diamond Ball, Standard Length • •06SD-G1 0.6 mm Diamond Ball, Standard Length •08SD-G1 0.8 mm Diamond Ball, Standard Length •1D-G1 1 mm Diamond Ball, Extended Length • •1SD-G1 1 mm Diamond Ball, Standard Length • • •12D-G1 1.2 mm Diamond Ball, Extended Length •15D-G1 1.5 mm Diamond Ball, Extended Length • •15SD-G1 1.5 mm Diamond Ball, Standard Length • •2SD-120-G1 2 mm Diamond Ball, 120/140 Grit, Standard Length •2D-G1 2 mm Diamond Ball, Extended Length • •2SD-G1 2 mm Diamond Ball, Standard Length • • •25D-G1 2.5 mm Diamond Ball, Extended Length •25SD-G1 2.5 mm Diamond Ball, Standard Length • •3SD-100-G1 3 mm Diamond Ball, 100/120 Grit, Standard Length •3D-G1 3 mm Diamond Ball, Extended Length • •3SD-G1 3 mm Diamond Ball, Standard Length • • •35D-G1 3.5 mm Diamond Ball, Extended Length •35SD-G1 3.5 mm Diamond Ball, Standard Length • •4D-100-G1 4 mm Diamond Ball, 100/120 Grit •4D-L-G1 4 mm Diamond Ball •4D-G1 4 mm Diamond Ball • • • •5D-100-G1 5 mm Diamond Ball, 100/120 Grit •5D-2-G1 5 mm Diamond Ball •5D-G1 5 mm Diamond Ball • • • •6D-100-G1 6 mm Diamond Ball, 100/120 Grit •6D-G1 6 mm Diamond Ball • • •
COARSE DIAMOND BALL
1DC-G1 1 mm Coarse Diamond Ball, Extended Length • •1SDC-G1 1 mm Coarse Diamond Ball, Standard Length • •15DC-G1 1.5 mm Coarse Diamond Ball, Extended Length •15SDC-G1 1.5 mm Coarse Diamond Ball, Standard Length • •15DCT-G1
1.5 mm Coarse Diamond Ball, Tapered, Extended Length •
2DC-G1 2 mm Coarse Diamond Ball, Extended Length • •2SDC-G1 2 mm Coarse Diamond Ball, Standard Length • •2SDCT-G1
2 mm Coarse Diamond Ball, Tapered, Standard Length •
25DC-G1 2.5 mm Coarse Diamond Ball, Extended Length •25SDC-G1 2.5 mm Coarse Diamond Ball, Standard Length • •3DC-2-G1 3 mm Coarse Diamond Ball •3SDC-22-G1 3 mm Coarse Diamond Ball •3SDC-50-G1
3 mm Coarse Diamond Ball, 50/60 Grit, Standard Length •
3DC-G1 3 mm Coarse Diamond Ball, Extended Length • •3SDC-G1 3 mm Coarse Diamond Ball, Standard Length • • •3SDCT-G1
3 mm Coarse Diamond Ball, Tapered, Standard Length •
35DC-G1 3.5 mm Coarse Diamond Ball, Extended Length •35SDC-G1 3.5 mm Coarse Diamond Ball, Standard Length • •4DC-22-G1 4 mm Coarse Diamond Ball •4DC-G1 4 mm Coarse Diamond Ball • • • •5DC-22-G1 5 mm Coarse Diamond Ball •5DC-40-G1 5 mm Coarse Diamond Ball, 40/60 Grit •5DC-G1 5 mm Coarse Diamond Ball • • •55DC-G1 5.5 mm Coarse Diamond Ball •6DC-2-G1 6 mm Coarse Diamond Ball •6DC-G1 6 mm Coarse Diamond Ball • • • •8DC-G1 8 mm Coarse Diamond Ball •
EXTRA COARSE DIAMOND BALL
4DX-20-G1 4 mm Extra Coarse Diamond Ball, 20/30 Grit • •4DX-G1 4 mm Extra Coarse Diamond Ball • • •5DX-G1 5 mm Extra Coarse Diamond Ball • • •6DX-20-G1 6 mm Extra Coarse Diamond Ball, 20/30 Grit • • •6DX-G1 6 mm Extra Coarse Diamond Ball • • • • •7DX-G1 7 mm Extra Coarse Diamond Ball •8DX-G1 8 mm Extra Coarse Diamond Ball •
ROUTER
6R-G1 1.12 mm x 6.35 mm Fluted Router • •1R-G1 1.2 mm x 12.8 mm Fluted Router • •1R-G1 1.4 mm x 12.8 mm Fluted Router •CRN-M-G1 1.3 mm x 12.8 mm Fluted Router •CRN-M-G1 2 mm x 15.6 mm Fluted Router •CRN-G1 1.4 mm x 12.8 mm Fluted Router •CRN-G1 1.85 mm x 16 mm Fluted Router •CRN-G1 2.5 mm x 25.4 mm Fluted Router •14R-G1 1.4 mm x 12.8 mm Fluted Router •CRN-S-G1 2.15 mm x 22 mm Fluted Spiral Router •CRN-S-G1 2.47 mm x 30.3 mm Fluted Spiral Router •25R-G1 2.15 mm x 25.4 mm Fluted Router • • •3-10-G1 1.93 mm Suture Pass Drill / 1.17 eye •
OVAL
4OVDC-G1 4 mm x 8 mm Coarse Diamond Oval •4OVD-G1 4 mm x 8 mm Diamond Oval • •4OV-G1 4 mm x 8 mm Fluted Oval • • •5OV-G1 5 mm x 10 mm Fluted Oval • • • •56OV-G1 5 mm x 6 mm Fluted Oval • •58OV-G1 5 mm x 8 mm Fluted Oval • •55OV-C-G1 5.5 mm x 10 mm Carbide Fluted Oval •
BARREL
3BA-A-G1 3 mm x 11.3 mm Fluted Barrel, 14 Flutes •4BA-G1 4 mm x 8 mm Fluted Barrel •4BA-S-G1 4 mm x 8 mm Fluted Barrel •4BA-A-G1 4 mm x 11 mm Fluted Barrel, 14 Flutes •5BA-G1 5 mm x 10 mm Fluted Barrel • •5BA-A-G1 5 mm x 11.3 mm Fluted Barrel •5BA-20-G1 5 mm x 20 mm Fluted Barrel •6BA-A-G1 6 mm x 11.3 mm Fluted Barrel •8BA-G1 8 mm x 12.5 mm Fluted Barrel • •
PEAR SHAPED
4FD-G1 4 mm x 10 mm Diamond Pear Inverted •6PD-G1 6 mm x 9 mm Diamond Pear •6P-G1 6 mm x 9 mm Fluted Pear • •6IP-G1 6 mm x 11.8 mm Fluted Pear, Inverted •7IP-G1 7 mm x 13.1 mm Fluted Pear, Inverted •
MATCHSTICK
8N-18-G1 1.8 mm Fluted Matchstick • • •8N-L-G1 2.3 mm Fluted Matchstick •8N-G1 2.3 mm Fluted Matchstick • • •8ND-G1 2.5 mm Diamond Matchstick • • •8NS-M-C-G1 3 mm Carbide Fluted Matchstick, Less Aggressive • •8NS-M-G1 3 mm Fluted Matchstick, Less Aggressive • • • • • •8NSM-G1 3 mm Fluted Matchstick, Less Aggressive •8NS-G1 3 mm Fluted Matchstick • • • • • • • •8NSDC-G1 3.2 mm Coarse Diamond Matchstick • •8NSD-G1 3.2 mm Diamond Matchstick • • •8NS-ML-G1 3.2 mm Fluted Matchstick, Less Aggressive •
ACORN
4AC-G1 4 mm Fluted Acorn •5AC-G1 5 mm Fluted Acorn • • •6AC-G1 6 mm Fluted Acorn • • • • • •7AC-G1 7 mm Fluted Acorn • •75AC-A-G1 7.5 mm Fluted Acorn, Less Aggressive •75AC-G1 7.5 mm Fluted Acorn • •9AC-G1 9.2 mm Fluted Acorn • •
TWIST DRILL
10-G1 1.0 mm Twist Drill for 1.25 mm Screw •11-G1 1.1 mm Twist Drill for 1.50 mm Screw •1203TD-G1 1.2 mm x 3 mm Twist Drill •1254TD-G1 Twist Drill for 1.25 mm x 4 mm Screw •13-G1 1.3 mm Twist Drill for 1.7 mm Screw •1504TD-G1 Twist Drill for 1.5 mm x 4 mm Screw • •1506TD-G1 Twist Drill for 1.5 mm x 6 mm Screw •1506TD-M-G1 1.5 mm x 6 mm Fluted Twist Drill •155-G1 1.55 mm Twist Drill for 2.0 mm Screw. •1510TD-G1 1.55 mm x 10 mm Fluted Twist Drill •DS-A-G1
1.7 mm x 11.9 mm Twist Drill with Depth Stop, Aesculap® •
2004TD-G1 Twist Drill for 2.0 mm x 4 mm Screw. •2006TD-G1 Twist Drill for 2.0 mm x 6 mm Screw •2433TD-G1 2.4 mm x 3.3 mm Twist Drill •
BELL
47-5-G1 3.2 mm Fluted Bell •62BE-G1 6.2 mm Fluted Bell, Side Cut Only. •
DRUM
35DR-G1 3.5 mm x 8.4 mm Fluted Drum (F) •LS9-35-G1 3.5 mm x 19.8 mm Fluted Drum (G) •45DRMDX-G1 4 mm x 5 mm Extra Coarse Diamond Drum (D) •4DRM-G1 4 mm x 8.9 mm Fluted Drum, Side Cut Only (A) • • •47DRM-G1 4.7 mm x 8 mm Fluted Drum (G) •LS9-5-G1 4.7 mm x 20 mm Fluted Drum (G) •5DRM-G1 5 mm x 8.4 mm Fluted Drum (F) • • •5DRM12-G1 5 mm x 12 mm Fluted Drum (F) •5DRC-G1 5 mm x 14 mm Fluted Drum, Side Cut Only (E) •5DRM-L-G1 5 mm x 16.2 mm Fluted Drum (F) •6DRC-G1 6 mm x 14 mm Fluted Drum, Side Cut Only (E) •62DRM-G1 6.2 mm x 4.6 mm Fluted Drum, Side Cut Only (B) • • •64DRM-G1 6.4 mm Fluted Drum (C) •68DRMDX-G1 6.8 mm x 10.6 mm Extra Coarse Diamond Drum (D) • •68DRMDC-G1 6.8 mm x 10.6 mm Coarse Diamond Drum (D) •7DRC-11-G1 7 mm x 11 mm Fluted Drum (E) •7DRC-G1 7 mm x 14 mm Fluted Drum, Side Cut Only (E) •LS9-76-G1 7.6 mm x 28.6 mm Fluted Drum (F) •8DRC-11-G1 8 mm x 11 mm Fluted Drum (E) •8DRC-G1 8 mm x 14 mm Fluted Drum, Side Cut Only (E) •9DRC-G1 9 mm x 14 mm Fluted Drum, Side Cut Only (E) •95DRM-G1 9.5 mm Fluted Drum (C) • • •10DRC-G1 10 mm x 14 mm Fluted Drum, Side Cut Only (E) •
CARBIDE/DIAMOND DISC
15DRMC-G1 1.5 mm x 7.5 mm Cylindrical Carbide Drum (A) •15DRMC-L-G1 1.5 mm x 7.5 mm Cylindrical Carbide Drum(A) •3DRMC-G1 3 mm x 9.5 mm Fluted Carbide Drum (A) •15C-G1 3.2 mm Fluted Carbide Side Cutter (B) •51C-G1 6.4 mm Cylindrical Carbide (C) •17DD-G1 17 mm Diamond Disc (D) • •25DD-G1 25.4 mm Diamond Disc (D) • •
CORING/BORING
16CT-G1 6.7 mm Coring Tool (A) •19CT-G1 9.9 mm Coring Tool (A) •98B-G1 9.5 mm Boring Tool. •97B-G1 12.6 mm Boring Tool. •126BT-G1 12.6 mm x 10.4 mm Boring Tool, 3 Flutes. •
ANSPACH DISSECTION TOOLSReference Chart
Combine the prefix and suffix from the chart below to determine the dissection tool Catalog Number. Example: S-1B-G1
Combine the prefix and suffix from the chart below to determine the dissection tool Catalog Number. Example: S-1B-G1
Catalog NumberSuffix
Catalog NumberSuffix
Catalog NumberPrefix
Catalog NumberPrefix
ATTACHMENT TYPE ATTACHMENT TYPE
S- SHD- M- MHD- L- LHD- MIA16- XLHD- ADG- P- A- L- S- SHD- M- MHD- L- LHD- MIA16- XLHD- ADG- P- A- L-
SHORT
, QD8,
QD8-S
SHORT
-G1,
QD8-G1,
QD8-S-G
1
SHORT
, QD8,
QD8-S
SHORT
-G1,
QD8-G, Q
D8-S-G
1
SHORT
-HD, S
HORT-H
D-G1
SHORT
-HD, S
HORT-H
D-G1
MED
IUM
, QD11
, QD11
-S, M
EDIU
M-G
1,
QD11-G
1, QD11
-S-G
1
MED
IUM
, QD11
, QD11
-S, M
EDIU
M-G
1,
QD11-G
1, QD11
-S-G
1
MED
IUM
-HD, M
EDIU
M-H
D-G1
MED
IUM
-HD, M
EDIU
M-H
D-G1
LONG, L
ONG-S, Q
D14, Q
D14-S
, LONG-G
1,
QD14-G
1, QD14
-S-G
1
LONG, L
ONG-S, Q
D14, Q
D14-S
, LONG-G
1,
QD14-G
1, QD14
-S-G
1
LONG-H
D, LONG-H
D-G1
LONG-H
D, LONG-H
D-G1
MIA
16, M
IA16
-G1
MIA
16, M
IA16
-G1
XL-HD
XL-HD
ADGADG
CRANI-P, C
RANI-P-G
1
CRANI-P, C
RANI-P-G
1
CRANI-A, C
RANI-A-R
,
CRANI-A-G
1
CRANI-A, C
RANI-A-R
,
CRANI-A-G
1
CRANI-L, C
RANI-L-R
,
CRANI-L-G
1
CRANI-L, C
RANI-L-R
,
CRANI-L-G
1
= Carbide Cutting BurrNote: Dissection tools in this chart are not for use with Black Max, microMax or iMRI Systems.
All dissection tools are single use only.2
See reverse side of this page for Minimal Access Attachments Chart.
Fluted Diamond
Fluted
Fluted Fluted, Inverted Diamond
Fluted
Fluted
Diamond
Twist Drill Depth Stop, Aesculap®
(A)
(B) (D)
(E)(C)
(F) (G)
(A) (B) (C) (D)
(A) (B)
Fluted Fluted Spiral Suture Pass Drill
FLUTED BALL
1SB 1 mm Fluted Ball •15SB 1.5 mm Fluted Ball •2SB 2 mm Fluted Ball • • •25SB 2.5 mm Fluted Ball •3SB 3 mm Fluted Ball • • •
DIAMOND BALL
05SD 0.5 mm Diamond Ball •08SD 0.8 mm Diamond Ball •15SD 1.5 mm Diamond Ball • •2SD 2 mm Diamond Ball • • •3SD 3 mm Diamond Ball • • •4D 4 mm Diamond Ball • • •4DC 4 mm Coarse Diamond Ball •
Matchstick
8N-18 1.8 mm Fluted Matchstick • • •8N 2.3 mm Fluted Matchstick • • •8NS 3 mm Fluted Matchstick • • •8NSDC 3 mm Coarse Diamond Matchstick • • •
Combine the prefix and suffix from the chart below to determine the dissection tool Catalog Number. Example: MA10-1SB
Catalog NumberSuffix
Catalog NumberPrefix
ATTACHMENT TYPE
MA10- MA15- MA19-
MA-1
0S, M
A-10C
MA-1
5S, M
A-15C
, MA-1
5ST
MA-1
9ST
Minimal Access Attachments
Man
ufactu
rer Th
e An
spach
Effort, In
c .4500 Riverside D
rivePalm
Beach Gardens, FL 33410
USA
To Order (U
SA): (800) 327-6887
To Order (C
anada): (855) 946-8999
ww
w.d
epu
ysynth
es.com
EC R
EP Syn
thes G
mb
HEim
attstrasse 34436 O
berdorfSw
itzerlandTel: +
41 61 965 61 11Fax: +
41 61 965 66 00
An
spach
® Pow
er Tools
G1 D
issection Tools Reference C
hart
Limited W
arranty and Disclaim
er: DePuy Synthes products are sold w
ith a limited w
arranty to the original purchaser against defects in workm
anship and m
aterials. Any other express or im
plied warranties, including w
arranties of merchantability or fitness, are hereby disclaim
ed.
Please also refer to the package insert(s) or other labeling associated with the devices identified in this brochure.
CA
UTIO
N: Federal Law
restricts these devices to sale by or on the order of a physician.
Some devices listed in this brochure m
ay not have been licensed in accordance with C
anadian law and m
ay not be for sale in Canada.
Please contact your sales consultant for items approved for sale in C
anada.
Not all products m
ay currently be available in all markets.
© D
ePuy Synthes 2015–2016. All rights reserved.
DSU
S/PWT/0415/0113(1)
11/16 C
S
FLU
TED
BA
LL
1SB
1 m
m F
lute
d B
all
•15
SB1.
5 m
m F
lute
d B
all
•2S
B2
mm
Flu
ted
Bal
l•
••
25SB
2.5
mm
Flu
ted
Bal
l•
3SB
3 m
m F
lute
d B
all
••
•
DIA
MO
ND
BA
LL
05S
D0.
5 m
m D
iam
on
d B
all
•0
8SD
0.8
mm
Dia
mo
nd
Bal
l•
15SD
1.5
mm
Dia
mo
nd
Bal
l•
•2S
D2
mm
Dia
mo
nd
Bal
l•
••
3SD
3 m
m D
iam
on
d B
all
••
•4
D4
mm
Dia
mo
nd
Bal
l•
••
4D
C4
mm
Co
arse
Dia
mo
nd
Bal
l•
Mat
chst
ick
8N
-18
1.8
mm
Flu
ted
Mat
chst
ick
••
•8
N2.
3 m
m F
lute
d M
atch
stic
k•
••
8N
S3
mm
Flu
ted
Mat
chst
ick
••
•8
NSD
C3
mm
Co
arse
Dia
mo
nd
Mat
chst
ick
••
•
Com
bine
the
pre
fix
and
suffi
x fr
om
the
char
t b
elow
to
det
erm
ine
the
diss
ecti
on t
ool
Cat
alo
g N
umb
er.
Exam
ple:
MA
10-1
SB
Cat
alo
g N
um
ber
Suffi
xC
atal
og
Nu
mb
erPr
efix
AT
TAC
HM
ENT
TY
PE
MA1
0-MA1
5-MA1
9-
MA-1
0S, M
A-10C
MA-1
5S, M
A-15C
, MA-1
5ST
MA-1
9ST
Min
imal
Acc
ess
Att
ach
men
ts
Manufacturer The Anspach Effort, Inc.4500 Riverside DrivePalm Beach Gardens, FL 33410USATo Order (USA): (800) 327-6887To Order (Canada): (855) 946-8999
www.depuysynthes.com
EC REP Synthes GmbHEimattstrasse 34436 OberdorfSwitzerlandTel: +41 61 965 61 11Fax: +41 61 965 66 00
Anspach® Power Tools
G1 Dissection Tools Reference Chart
Limited Warranty and Disclaimer: DePuy Synthes products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.
Please also refer to the package insert(s) or other labeling associated with the devices identified in this brochure.
CAUTION: Federal Law restricts these devices to sale by or on the order of a physician.
Some devices listed in this brochure may not have been licensed in accordance with Canadian law and may not be for sale in Canada. Please contact your sales consultant for items approved for sale in Canada.
Not all products may currently be available in all markets.
© DePuy Synthes 2015–2016. All rights reserved.DSUS/PWT/0415/0113(1) 11/16 CS