jksimmet steady state processing plant simulator split engineering chile ltda. eduardo marquina...
TRANSCRIPT
![Page 1: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/1.jpg)
JKSimMetSteady State Processing Plant
Simulator
Split Engineering Chile Ltda.
Eduardo Marquina #3937 oficina 1201
Casilla 19158 - Correo 19 Vitacura - Santiago, CHILE
Fono: (56)-(2)-2064674
Fax : (56)-(2)-2064668
http://www.spliteng.cl
Split Engineering LLC.
110 S. Church Avenue, Suite 8312 CP 85701Tucson Arizona, USAFono: (1)-(520)-3273773Fax : (1)-(520)-3267532http://www.spliteng.com
Review 1.2 of the 01-04-06
![Page 2: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/2.jpg)
Overview
History
• Developed after 3 decades of experience in modelling for the Australian Julius Kruttschnitt Mineral Research Centre, JKMRC.
• The JKMRC is the scientific and technologic development center of the Queensland´s University - Australia.
• In 1986 born the JKTech, the commercial division of JKMRC.
• Split Engineering is the software official distributor for Latin America.
![Page 3: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/3.jpg)
Overview
Objectives
• Simulate grinding process.
• Simulate clasification process.
• Allow the characterization of a mineral processing plant.
• Optimization of existings flowsheets.
• Make conceptual desing studies.
• Evaluate the suitability of different flowsheets to reach the wanted operation objectives.
• Be a tool for Process Engineers in flowsheet analysis.
![Page 4: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/4.jpg)
Overview
System Description
• JkSimMet is a software that facilitates the simulation of mineral processing plants operations.
• JKSimMet Gives to the engineer the capability to design and improve any grinding-clasification circuit.
• JKSimMet makes steady state simulations of a serie of grinding-clasification operations.
![Page 5: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/5.jpg)
Overview
System Description
• JKSimMet includes processing models for equipments, such as: Crushers (Jaw, Cone, Rolls, Gyratory) Mills (Ball, rod, SAG, AG) Hydrocyclone Etc.
• JKSimMet alows to make some adjust to models for characterize your plant.
• JKSimMet allows to make mass balancing
![Page 6: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/6.jpg)
Overview
Implementation
• Software License.
• A PC (Personal Computer) with next minimal requirement: Operative System :Microsoft Windows 98/NT4/2000/XP. Processor : 400 Hz. RAM Memory :128MB (recommended 256MB). Hard Disk :2 GB with 100 MB free space. Monitor :Graphic SVGA (15”). CD Drive. Floppy disk drive (3.5 inch). Mouse and keyboard
• A person who has attended in a formal trainning.
![Page 7: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/7.jpg)
Overview
Security
• JKSimMet has security keys (Dongle) Parallel port USB port PCMCIA (SIC) port
![Page 8: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/8.jpg)
Overview
Components
• Simulation It is based on the capability to create a representative model
of the plant.
• Model fitting This modality makes the model created get fit, as much as
posible, to every specific plant and operative condition.
• Mass balancing It is use to make a balance of sizing data, chemical analysis
data and flow rate data, taken from a steady state condition survey.
![Page 9: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/9.jpg)
Overview
Structure
• The software structure consists in:
Proyect: Contains one or more flowsheets and data associated for streams and units.
Flowsheet: Graphical representation of a section or complete mineral processing plant.
Equipment and Ports: the ports represents the connections between equipment.
Units: It is call unit to any equipment of processing like a ball mill or hydrocyclone.
Streams: Is a description of any flow of material in terms of tph or solids % or size distribution, etc.
![Page 10: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/10.jpg)
Process
Cycle
• The mineral processing can be simplified as a cycle that involves design, implementation, measurement of results and comparison stages, at the moment, because of JKSimMet this is a iterative and interactive process.
• JKSimMet allows analysis of every one of this stages to measure their results as a set.
DESIGN
IMPLEMENTATION
MEASUREMENT
CO
MPA
RIS
ON
![Page 11: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/11.jpg)
Process
Actions
• Definition Objectives, operation conditions
• Planning Flowsheet Design, data
• Evaluation Performance analyze and
predicts• Measurement
Developt• Control
Flowsheet optimization and data analysis
![Page 12: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/12.jpg)
Process
Definition
• Design criteria• Available data• Performance objectives
• Available Equipment models Default parameters model
![Page 13: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/13.jpg)
Process
Evaluation
• Modelling and simulation• Performance characterization• Visualization
• Available Simulation Model fitting Mass balancing
![Page 14: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/14.jpg)
Process
Measurement
• Results and observations
• Available Data copy to clipboard Statistical methods Comparation between predicts and measurement data Graphical representation of data
![Page 15: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/15.jpg)
Process
Control
• Standardizes the flowsheet configuration• Flowsheet simulation• Results optimization
• Available Simulation Model fitting Mass balance Size distribution graphs Configurable Reports Online help files
![Page 16: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/16.jpg)
Introduction
• The simulation process involves a representative flowsheet definition, input of available data, followed by fitting parameters model and data for simulation.
• JKSimMet has a common structure for all the analysis tools, the users utilize the same flowsheet and follow the same procedures for all modes
Flowsheet Design
Data Input
Model Fitting
Simulation
Mass Balancing
JKSimMet Operation
Results Analysis
![Page 17: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/17.jpg)
JKSimMet Operation
Flowsheet Design
• Add Equipment
In this stage the users select the flowsheet equipment for the representative processing plant
![Page 18: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/18.jpg)
JKSimMet Operation
Equipment
• Model parameters:
Includes the mill scalling (diameter, fraccion de llenado, lenght, critical speed, work index, ball top size), Rate/Discharge function parameters, función de rompimiento.
![Page 19: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/19.jpg)
JKSimMet Operation
Ports
• Data input (flow rates and size), it can be done writing one on one every data or by copy-paste functions.
![Page 20: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/20.jpg)
JKSimMet Operation
Model fitting
• For a real mineral processing operation, the best fitted values are different to the default values given by the system.
• Every model has a list of adjustable parameters for fitt. • Parameters:
Equipment depending parameter. Dimensions
Ore depending parameter Work Index Specific gravity Breakage function
![Page 21: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/21.jpg)
JKSimMet Operation
Model fitting
• Parameters: Measured or calculated operative parameters
Depend of a combination of equipment, ore and flow rate parameters. For example: feed preassure of a cyclon
• The figure, shows some model parameters that can be fitted for a ball mill and Cyclon.
![Page 22: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/22.jpg)
JKSimMet Operation
Model fitting
• How the model fitting program works
Works calculating the difference between experimental and predicted data.
Derives a value that represent the weigthed sum of squares (WSSQ).
![Page 23: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/23.jpg)
JKSimMet Operation
Simulation
• JKSimMet simulation technique
The JKSimMet makes a steady state simulation of a serie of grinding-clasification operations, by using model process for all equipment involved in such process.
This units can be combined in flowsheets and allows to the engineer to simulate the operation of a plant or subsections of a plant. A simulation can be controlled by specification of model parameters, the selection of process model and the specification of operation data.
![Page 24: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/24.jpg)
JKSimMet Operation
Simulation
• JKSimMet capabilities In adittion to the simulation capacities descrived before, the JKSimMet
has a lot of functions for use and archive a set of data. The JKSimMet is a powerfull tool for the process engineer and
metalurgist in terms of conceptual design, refining/alignment and monitoring of processing plants.
It makes possible the simulation of a number and variety almost indefinite of circuit design.
The simulation capacities can be improved making a model fit for plant conditions.
![Page 25: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/25.jpg)
JKSimMet Operation
Mass Balancing
• ConceptThe mass balancing mode calculate the best adjusment of all selected flows and calculates the more small adjusment to make data congruents.
The sum squares difference between measured and adjusted data is taken as a goodness measure of the model fit.
The mass balancing program adjust the flow rates selected by user to find the best set of flow rates to make that the balance result become closer to the lab measurement.
![Page 26: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/26.jpg)
JKSimMet Operation
Mass Balancing
• How the mass balancing program works
It is a special case of the adjusting of the non-linear least squares.
It is a easily calculation solution.
It doesn´t require initial calculations of flow rates, excepting a flow rate that is used like initial data.
![Page 27: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/27.jpg)
Split Engineering Chile Limitada
• Teléfono : (56) (2) 2064674.
• Fax : (56) (2) 2064668.
• E-mail : [email protected]
• Web : www.spliteng.cl
Contacto
Para Mayor Información Comunicarse a:
![Page 28: JKSimMet Steady State Processing Plant Simulator Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura -](https://reader036.vdocument.in/reader036/viewer/2022062321/56649d9e5503460f94a87a7c/html5/thumbnails/28.jpg)
Thanks for your attention!