kat vorsatz usa - hettich · together with hettich intermat or ecomat hinges this mounting plate...

Intermat/EcomatFast assembly hinges

21

22

Intermat - maintenance-

Eccentric height adjustmentExact door height alignmentwithout loosening screws

Intermat is sophisticated hinge

technology made by Hettich.

Its external appearance indicates

quality. Long service life

and great ease of use

round off the hinge profile.

23

-free, robust, quiet, reliable!

3 mmSuperflat cup designHuge product range with over 100 mounting options

Concealed latchsimple, safe, reliable

Eccentric depth adjustmentExact door depth alignmentwithout loosening screws

Hettich Face Frame

The Hettich face frame mounting plates enable you tocombine high end European hinge technology and faceframe cabinetry.

In addition cam adjustment features allow you to be flexible and precise.

Together with Hettich Intermat or Ecomat hinges this mounting plate offers you variety of door design possibilities.

24

Mounting plate for overlay constructionwith eccentric height adjustment!

± 2 mm

Hettich Face Frame

Hettich Face Frame mounting plate for inset constructionenables you to build your face frame cabinets.

Adjustment via excentric cam makes it easy to find the right position of the door.

Flexible, fast adjustment offers you a variety of door design possibilities.

25

Mounting plate for inset constructionwith eccentric height adjustment!

± 2 mm

Hettich Direkt TopThe patented screw-on cross mounting plate with eccentric height adjustment!

min.15

ø5

37

37

min.15

ø5

7,5

The Hettich Direkt Top fixing system

patented

26

Hettich Direkt is a clever method of fixing mounting plates, used especially for half overlay mounting. The screw holes are slightly offset so that when mounting to a centre panel with a thickness from 15 mm,a firm fixing with high tear-out strength is guaranteed.

Cost savings during assembly: The "Hettich Direkt" mounting plate is provided with pre-mounted locating pegs and asymmetrically positioned special screws. It is simply inserted into the ø 5 mm hole line and fits firmly even before being screw fixed.

This simplifies assembly not only of the centre panel, but also in the cabinet area.

27

Hettich TopThe screw-on cross mounting plate with pre-mounted self-tapping screws and eccentric height adjustment!

Cabinet doors can be aligned with a hand movement - it's no problem with the eccentric adjustment system from Hettich.

A perfect reveal cannot be achieved more quickly, directly or indeed more safely, as the fastening screws do not need to be released beforehand.

The height adjustment is realized via the integrated eccenter in the mounting plate. The five versions available from Hettich cover different mounting variants. The depth adjustment of a cabinet door is done through the eccenter in the hinge.

Only a screwdriver is required to precisely adjust the height and depth. A short turn and all doors form a perfect line.

15 37

± 2 mm

28

Silent System The perfect cushioning systemcontrols furniture door closure gently and quietly.

Clip-on door buffer

• Simply clips on

• No additional steps in manufacture

• A simple screw enables step-less adjustment of the cushioning function

• Toolless assembly and disassembly

• Door buffer identical for left and right-hand mounted doors

• Can be retrofitted to tried and tested Intermat and Ecomat hinges

Convenience for the customer – Solutions for every application:

Screw-on door buffer for overlay and inset doors

• Fastens to upper or lower cabinet panel

• No additional steps in manufacture

• A simple screw enables step-less adjustment of the cushioning function

• Can be retrofitted to tried and tested Intermat and Ecomat hinges

Drill-in door buffer for overlay doors

• Fits almost invisibly into the lower or upper panel: discreet, yet efficient

• Can also be retrofitted to existing cabinets

• To fit, simply insert into a 10 mm dia. hole

• For use with Intermat or Ecomat hinges

ø 10

50

0,9

Z

ø 10

50

0,9

Z

20

max.75

100,9

X7min.69X17

14,5

34

Countersunkscrewø 4 x 17 mm

20

max75

10

X7min69

0,9

17

14,5

34

X

Countersunkscrewø 4 x 17 mm

29

Silent System for Intermat and Ecomat hingesTechnical information

Clip-on door buffer Silent System

for overlay doors (cranking 0 and 9,5 mm), inset doors (cranking 16 mm) and for use with Intermat and Ecomat hinges.

A simple screw enables step-less adjustment of the cushioning function.

Grey plastic

Screw-on door buffer Silent System

for overlay and inset doors and for use with Intermat and Ecomat hinges.

A simple screw enables step-less adjustment of the cushioning function.Grey plastic

Assembly

Dimension X = distance from mounting plate + hinge cranking

2 / 3

2

1

1

X

Drill-in door buffer Silent System

for overlay doors and for use with Intermat and Ecomat hinges.

Grey plastic

Assembly

Guide values for 19 mm chipboard panels with a density of 750 kg/m3

Door

hei

ghts

up

to

2400

2000

1600

900

Door width up to 600 mm

Recommended number of buffers per door

Dimension Z = 17 + distance from mounting plate + hinge cranking

Assembly

Disassembly

30

Intermat/EcomatCup TB 42Screw-on

Cup TB 43Press-in

3 mm 3 mm

Cup TB 42

45

ø 359,5

C

12,811

ø8

Cup TB 43

45

ø 35C

9,5

12,811,8 11,8

31

All mounting variants and drill pattern hole dimension at a glance

Cup TB FIXToolless fast assembly

Special solutions forglass doors

Cup T 1for glass doors

45

ø 359,5

C

11,86

ø8

3 mm

5,5 +0,5ø 26

4 - 6,5 mm

CupTB FIX

32

5

4

3

2

X

min

. 90

mm

C

Technical information

Minimum door reveal

Minimum door revealat least 2 x door deflection

Mounting optionsThere are three basic methods of mounting hinges

Minimum door revealThe minimum reveal, also called door deflection, is the space required for opening a door.The amount of reveal depends on the cup distance C, the doorthickness and the hinge type. Chamfered door edges reduce the reveal required. The required minimum reveal can be derived from the table providedfor each hinge.

Minimum door reveal for half overlayFor half overlay configurations, the total reveal between the doorsmust be chosen to correspond to twice the door reveal. Both doorscan then be opened at the same time.

InsetIn this configuration, the door is positionedinside the side wall of the cabinet. A reveal is required for opening the door. This configuration necessitates the use of heavilycranked hinges.

Half overlayIn this configuration, two doors are

positioned in front of the middle wall of a cabinet. The distance between

the doors is the total required reveal. The door overlay is reduced which

necessitates the use of cranked hinges.

Full overlayIn this configuration, the door is positioned infront of a side wall of the cabinet. The reveal at one side is such that the door can be opened safely.

up t

o 20

00

Door

hei

ghts

Reveal

Number of hinges per door:Door width, door height, door weight plus material quality of the door are key factors for determining the required number of hinges. In practice, these factors are very variable.The numbers given in the diagram are for reference only. A trial mounting is recommendedif in doubt.For stability, the distance between hinges should be chosen as large as possible.

X = distance between two hinges(Reference values for 19 mm thick chipboard with a density of 750 kg/m3)

Cup distance CThe cup distance C is the distance between theedge of the door and the edge of the cup hole.The maximum cup distance depends on thehinge in question.The larger the cup distance, the smaller therequired minimum reveal.

Overlay (Door overlay)The overlay is the distance by which the door projects over the cabinet front.

RevealThe reveal is the distance between the outer edge of the door and the outer side of thecabinet (full overlay), the distance betweentwo doors (half overlay), the distance betweenthe outer edge of the door and the inner sideof the cabinet (inset).

i

Overlay

Door width up to 600 mm

up t

o 90

0up

to1

600

up t

o 24

00

33

222

1

3

2

12

i

Depth adjustment

Height adjustment

Overlay adjustment

Door adjustment

Technical informationIntermatFast-assembly hinges

Example: Intermat 9943 - Full overlayFixed sizes Overlay 14,5 mm

Cup distance 4,5 mmThe table shows a Distance (D) of 3 mm

DistanceMounting plates are available in various thicknesses withan effective height characterized by the value of thedistance.Starting point for calculating the required distance is theselected hinge with defined door overlay.Using planned cup distance and door thickness, first readthe required reveal value from the table. If this value is toolarge for the desired overlay, it can be reduced either byincreasing the cup distance C or by chamfering the dooredge.

Once the door reveal and cup distance C have beendefined, the mounting plate distance can be derived fromthe table.

If the distance value deviates from the actual mountingplate distance shown in the catalogue, the difference canbe compensated by turning the overlay adjustment screw.

Direct, variable depth adjustment with the eccentric screw

Turn screw clockwise:Door overlay decreases (-).Turn screw anticlockwise:Door overlay increases (+).

Using height-adjustable mounting platesmakes it possible to align the exact door height.

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

± 2 mm± 2 mm

-0,5 mm+3,5 mm

IntermatSnap-on assembly, disassemblyCharacteristic for Intermat hinges is the ergonomical snap-on assembly. The hinge is slipped into the front of themounting plate (1), then a light finger pressure and the hingearm latches onto the mounting plate (2) with an audible click.

The hinge arm is now securely clamped, via five points, with zero play.

Doors are clipped on zipper style from top to bottom - the top hinge alone is capable of taking the total weight of the door.

Disassembly is carried out in the opposite direction from bottom to top.

The hinge is unlatched by pressing lightly on latch (1) which is hidden under the side arm for security reasons.

In one movement, the hinge arm is lifted off the mounting plate (2) and the door is removed from the cabinet (3).

Direct, variable height adjustment with eccentric screw

When using Ecomat and linear mounting plates with eccentric height adjustment, the hinge has to be moved out of the way in order to adjust the height.

D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11

3 4 4,5 5 6Cup distance C mm

Full overlay

Full overlay Reveal Reveal

Half overlay Inset

34

Technical informationDetermine construction

Face Frame Frameless

Step 1: Determine cabinetconstruction

Step 2: Determine mounting option

Step 3: Cup distance

Step 4: Check minimum reveal

Step 5: Select hinge

For more technical information onSilent System refer to page 29

Step 6: Choose Silent System

The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm

3 mm radius: table entry – 1,2 mm

The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm

3 mm radius: table entry – 1,2 mm

Step 4: Check minimum reveal

Step 3: Cup distance

Full overlay

Full overlay Half overlay Reveal

Half overlay Inset

Step 2: Determine mounting option

Step 1: Determine cabinetconstruction

i

Distance (D)

Door

Overlay

Side

Cup distance C

D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11


D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11


Distance (D)

DoorOverlay

Side

Cup distance C

Door

Side

Reveal

Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7


Side

Reveal

Door

PU 200

TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453

Full overlay

Door buffer Silent System (grey)

clip-on screw-on drill-in

9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

Step 5: Select hinge

For more technical information onSilent System refer to page 29

Step 6: Choose Silent System

PU 200


Full overlay



9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800


35

. . . is an easy task. You will find the right solution for face frame construction as well as for frameless cabinets. All neccessary information on Intermat, Ecomat andSilent System is available on one page.


To use hinges in a faceframe construction refer to this column

iTechnical informationFinding the right hinge

110°

H

65

T

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

Overlay

Door

Side

Distance (D)

Side

Reveal

Door

Cup distance C

11,8

11,8

11,8

37

Intermat 9943Fast-assembly hingeOpening angle 110°

Door thickness from 15 mm

Concealed hinge with snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmIntermat 9943 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm

Mounting plates page 57-60Cover caps, accessories page 61

For more technical information refer to page 32-36

Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm

110°

Doorprotrusion T for 0 mmdistance and 3 mm cupdistance

Side

Door

Mounting H Toption mm mm

Full overlay 18,5 7Half overlay 28 16,5Inset 34,5 23

Face Frame FramelessCabinet construction


D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11

3 4 4,5 5 6

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6

Cupdistance C

Distance (D)Distance (D)

Overlay

DoorDoor

Reveal

Side

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Distance (D)

Side

RevealDoor

Cup distance C

Cup distance C mm

Cup distance C mmCup distance C mm

For face frame application use half cranked hinge

11,8

11,8

11,8

PU 200


Full overlay Door buffer Silent System (grey)


9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200


Half overlay Door buffer Silent System (grey)


9 038 342 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200


Inset Door buffer Silent System (grey)

clip-on screw-on

9 038 343 9 027 941

PU: 400 PU: 50

To use hinges in a frameless construction refer to this column

Tables and order numbersOn the right side you will find all tables to determine overlay, reveal and minimum reveal.Order numbers for hinges and Silent System can also be found here.

36

Step 1Determine cabinetconstruction

Step 2Determinemounting option

Step 5Select hinge

iTechnical informationFinding the right hinge

110°

H

65

T

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

Overlay

Door

Side

Distance (D)

Side

Reveal

Door

Cup distance C

11,8

11,8

11,8

37







110°


Side

Door





D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11

3 4 4,5 5 6

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6

Cupdistance C


Overlay

DoorDoor

Reveal

Side

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Distance (D)

Side

RevealDoor

Cup distance C

Cup distance C mm



11,8

11,8

11,8

PU 200




9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200




9 038 342 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200



clip-on screw-on

9 038 343 9 027 941

PU: 400 PU: 50

Step 6ChooseSilent System

Step 3Find cup distances and mounting plate

Step 4Check minimum reveal

110°

H

65

T

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

Overlay

Door

Side

Distance (D)

Side

Reveal

Door

Cup distance C

11,8

11,8

11,8

37







110°


Side

Door





D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11

3 4 4,5 5 6

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6

Cupdistance C


Overlay

DoorDoor

Reveal

Side

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Distance (D)

Side

RevealDoor

Cup distance C

Cup distance C mm



11,8

11,8

11,8

PU 200




9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200




9 038 342 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200



clip-on screw-on

9 038 343 9 027 941

PU: 400 PU: 50

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

Overlay

Door

Side

Distance (D)

Side

Reveal

Door11,8

11,8

11,8

Cup distance C

11,8

11,8

11,8

110°

H

60

T

38

Ecomat 9843Fast-assembly hingeOpening angle 110°


Concealed hinges, snap-on assembly, integrated door overlay and depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmEcomat 9843 hinges are snapped on to the mounting plateDepth adjustment +2 mm/-2 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm


110°


Side

Door



D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11

3 4 4,5 5 6

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6

Cup distance C mm


Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Cupdistance C

Distance (D)

Overlay

DoorDoor

Reveal

Side

Distance (D)

Distance (D)

Side

RevealDoor

Cup distance CFor face frame application use half cranked hinge





PU 200




9 038 346 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200




9 038 347 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200



clip-on screw-on

9 038 348 9 027 941

PU: 400 PU: 50

12,8

12,8

39


Concealed hinges, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmIntermat 9944 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/-3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm


H

T

65

125°


Side

Door


Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 1,3 1,6 1,9 2,3 2,84 1,3 1,6 1,9 2,3 2,74,5 1,2 1,5 1,8 2,2 2,65 1,2 1,5 1,8 2,1 2,6

D Overlay mm0 16 17 17,5 181,5 14,5 15,5 16 16,53 13 14 14,5 155 11 12 12,5 138 8 9 9,5 10

3 4 4,5 5

D Overlay mm1,5 5 6 6,5 7

3 4 4,5 5

D Reveal mm Side3 9 7 6 5 163 12 10 9 8 19

3 4 4,5 5

Cup distance C mm


Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Cupdistance C


Overlay

DoorDoor

Reveal

Side

125°


Full overlay 18,5 8Half overlay 28 17,5

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

Overlay

Door

Side

12,8

12,8



PU 200




9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 200




9 038 342 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

11,8

11,8

Distance (D)

DoorOverlay

Side

Cup distance C

Cup distance C

Distance (D)

OverlayDoor

Side

11,8

11,8

11,8

40

165°

H

T

66,5

Intermat 9956Fast-assembly hinge0 ProtrusionOpening angle 165°-120°

Concealed wide-angle hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 165° – the opening angle can be variably adjusted up to 120° with the adjustment screw (Order-no. 079 791)*. Cup diameter 35 mmThe wide-angle hinge enables an optimal reveal (hairline reveal)Negative door protrusionIntermat 9956 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mmHeight adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +0,5 mm/-3 mm


No door protrusion T for0 mm distanceand 3 mm cupdistance,unrestricteddrawer runner movement.

Side

Door


D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11

3 4 4,5 5 6

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side1,5 6 4 3 2 0 161,5 9 7 6 5 3 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm8 1,5 0,5 0

3 4 4,5

Cup distance C mm


120°-165°

Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0 0 0 0 04 0 0 0 0 04,5 0 0 0 0 05 0 0 0 0 06 0 0 0 0 0

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Cupdistance C


Overlay

DoorDoor

Reveal

Side

Distance (D)

Side

Reveal Door

Cup distance C


Full overlay 46 -1,5Half overlay 55,5 8



PU 100



screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

PU 100



screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

PU 100



screw-on

9 027 941

PU: 50

41

Mounting configurations Intermat 99560 Potrusion

Mounting configuration:Intermat 9956 full overlayMounting plate distance (D): 0 mm

Mounting configuration:Intermat 9956 full overlayMounting plate distance (D): 0 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.

Thick door application

Mitered corner door application

Mounting configuration:Intermat 9956 half overlayMounting plate distance (D): 5 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.

Mounting configuration:Intermat 9956 half overlayMounting plate distance (D): 3 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.

Lip door application

Intermat 9956Fast-assembly hinge0 ProtrusionOpening angle 165°-120°

120°-165°

* Opening angle 165° – steplessadjustment of the opening angleup to 120° via the adjustmentscrew M5x14 mm.

Order no. PU

079 791 50

Adjustment screw M5 x14 mm

120°165 °

max. 7

45,5

37

90°

55,5

0,5

130°

45°

19

19

19

130°

46

0,810

10

12

130°

37

Y6

X

X 25 29 32 35 38Y 24 21,3 19,4 17,5 15,5

Door protusion -1,3

11,3

11,3

11,3

95°

H

65

T

42

Intermat 9936Fast-assembly hinge for profile doors up to 32 mmOpening angle 95°

Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmThe hinge enables an optimum reveal (hairline reveal) for profile doorsIntermat 9936 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +2 mm/-3 mm

Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm;

5 mm; 8 mm


Side

Door


D Overlay mm0 16 17 17,5 18 19 20 211,5 14,5 15,5 16 16,5 17,5 18,5 19,53 13 14 14,5 15 16 17 185 11 12 12,5 13 14 15 168 8 9 9,5 10 11 12 13

3 4 4,5 5 6 7 8

D Overlay mm1,5 5 6 6,5 7 8

3 4 4,5 5 6

D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6

Cup distance C mm


Minimum revealCup distance Door thickness mmC mm 19 22 24 26 28 29 303 1,0 1,8 2,5 3,4 4,9 5,7 6,64 1,0 1,8 2,5 3,3 4,5 5,3 6,14,5 1,0 1,8 2,5 3,2 4,4 5,1 5,95 1,0 1,7 2,4 3,2 4,2 4,9 5,76 1,0 1,7 2,3 3,1 4,0 4,6 5,37 0,9 1,6 2,2 3,0 3,9 4,4 5,08 0,9 1,6 2,1 2,9 3,7 4,2 4,8

95°

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Cup distance C


Overlay

DoorDoor

Reveal

Side

Distance (D)Side

RevealDoor

Cup distance CFor face frame application use half cranked hinge

11,3

Distance (D)

DoorOverlay

Side

Cup distance C

11,3

Distance (D)

DoorOverlay

Side

Cup distance C

11,3

Distance (D)

Door

Reveal

Side

Cup distance C





PU 50

TB 43 (press-in) 073 915



9 015 112 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800

PU 50

TB 43 (press-in) 073 919

Half overlay

PU 50

TB 43 (press-in) 073 923

Inset



9 038 342 9 015 115 9 013 069

PU: 400 PU: 400 PU: 800


clip-on screw-on

9 038 343 9 027 941

PU: 400 PU: 50

13,8

13,8

13,8

43

Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm;

5 mm; 8 mm

D Overlay mm0 21 22 22,5 23 24 25 261,5 19,5 20,5 21 21,5 22,5 23,5 24,53 18 19 19,5 20 21 22 235 16 17 17,5 18 19 20 218 13 14 14,5 15 16 17 18

3 4 4,5 5 6 7 8Cup distance C mm

95°

H

65

T

Intermat 9935Fast-assembly hingefor profile doors up to 43 mmOpening angle 95°


Side

Door


D Overlay mm1,5 9,5 10,5 11 11,5 12,5

3 4 4,5 5 6

D Reveal mm Side8 10 8 7 6 4 168 13 11 10 9 7 19

3 4 4,5 5 6

Cup distance C mm

D Reveal mm5 5 4 3,5 3 2

3 4 4,5 5 6


11,3

Distance (D)

DoorOverlay

Side

Cup distance C

11,3

Distance (D)

DoorOverlay

Side

Cup distance C

11,3

Distance (D)

Door

Reveal

Side

Cup distance C

Order no. PU

TB 22 / 40 (screw-on) 073 925 10

Full overlay


95°

Concealed hinges, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 40 mmThe hinge enables an optimum reveal (hairline reveal) for profile doorsIntermat 9935 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +0,5 mm/-3 mm

Minimum revealCup distance Door thickness mmC mm 33 34 35 36 37 39 41 433 3,2 4,1 4,9 5,8 6,8 8,8 10,7 12,64 2,9 3,4 3,9 4,5 5,6 7,8 10,0 11,94,5 2,9 3,4 3,9 4,3 5,4 7,5 9,7 11,65 2,8 3,2 3,6 4,1 5,1 7,2 9,3 11,26 2,8 3,2 3,6 3,9 4,8 6,7 8,7 10,67 2,7 3,0 3,4 3,7 4,5 6,2 8,0 9,98 2,6 2,9 3,2 3,5 4,2 5,6 7,3 9,1

Order no. PU

TB 22 / 40 (screw-on) 073 926 10

Half overlay

Order no. PU

TB 22 / 40 (screw-on) 073 927 10

Inset

Distance (D)

DoorReveal

Overlay

Side

Cup distance C

Cupdistance C


Overlay

DoorDoor

Reveal

Side

Distance (D)Side

RevealDoor

Cup distance C


Full overlay 20 10,5Half overlay 30 20,5Inset 41 31,5



20°

11,3

20°

11,3

44

Intermat 9936 W20Fast-assembly hingefor corner cabinetsOpening angle 95°

Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmUsed for corner cupboards and cabinets with 20° face angleIntermat 9936 W20 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm

Mounting option

D Overlay mm0 10 11 11,5 12 13 14 151,5 8,4 9,4 9,9 10,4 11,4 12,4 13,43 6,8 7,8 8,3 8,8 9,8 10,8 11,88 1,5 2,5 3 3,5 4,5 5,5 6,5


W20

20°

95°


D Reveal mm0 6 5 4,5 4 3 2 11,5 7,6 6,6 6,1 5,6 4,6 3,6 2,63 9,2 8,2 7,7 7,2 6,2 5,2 4,28 14,5 13,5 13 12,5 11,5 10,5 9,5


Overlay

Distance (D)

Cupdistance C

Door

Side

Reveal

Distance (D)

Cupdistance C

Door

Side



PU 50

TB 43 (press-in) 077 681


screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

PU 50

TB 43 (press-in) 077 683


screw-on

9 027 941

PU: 50

C = 3 ... 8 mm

20°

11,3C = 3 ... 8 mm

20°

11,3

45

Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line. The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge. For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum reveal.

SpecificationHettich Intermat 9936 W20Snap-on assemblyEccentric depth adjustmentfor 20° face angle applicationsOpening angle 95°

Inside cabinet wall for D 8 mm... for D 5 mm

... for D 3 mm... for D 1,5 mm

... for D 0 mm

Cabi

net

side

Cabi

net

side

Scale 1: 1

Cup distancerange C

Cup distancerange C

Inside cabinet wall for D 8 mm... for D 5 mm

... for D 3 mm

... for D 1,5 mm... for D 0 mm

Hole lineX Hole line

Full overlay* Overlay adjustment +2 mm / –3 mm

Inset* Reveal adjustment –2 mm / +3 mm

X

30°

11,3

30°

11,3

46


Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmFor corner cupboards and cabinets with 30° face angleIntermat 9936 W30 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm

Mounting option

D Overlay mm0 10 11 11,5 12 13 14 151,5 8,3 9,3 9,8 10,3 11,3 12,3 13,33 6,6 7,6 8,1 8,6 9,6 10,6 11,68 0,8 1,8 2,3 2,8 3,8 4,8 5,8



D Reveal mm0 7 6 5,5 5 4 3 21,5 8,7 7,7 7,2 6,7 5,7 4,7 3,73 10,4 9,4 8,9 8,4 7,4 6,4 5,48 16,2 15,2 14,7 14,2 13,2 12,2 11,2


W30

95°30°

95°

Overlay

Distance (D)

Cupdistance C

Door

Side

Reveal

Distance (D)

Cup distance CDoor

Side



PU 50

TB 43 (press-in) 077 692


screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

PU 50

TB 43 (press-in) 073 930


screw-on

9 027 941

PU: 50

C = 3 ... 8 mm

30°

11,3

C = 3 ... 8 mm

30°

C = 3 ... 8 mm

11,3

47

Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge. For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.

SpecificationHettich Intermat 9936 W30Snap-on assemblyEccentric depth adjustmentfor 30° face angle applicationsOpening angle 95°

Scale 1: 1

... for D 5 mm... for D 3 mm... for D 1,5 mm... for D 0 mm

Hole line

... Inside cabinet wall for D 8 mm

Cabi

net

side

... for D 5 mm... for D 3 mm... for D 1,5 mm... for D 0 mm

Hole line


Cabi

net

side

Full overlay* Overlay adjustment +2 mm / –3 mm

Inset* Reveal adjustment –2 mm / +3 mm

Cup distancerange C

Cup distancerange C

X X

PU 50

TB 43 (press-in) 077 701


screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

PU 50

TB 43 (press-in) 048 098


screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

45°

11,3

45°

11,3

48


Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmFor corner cupboards and cabinets with 45° face angleIntermat 9936 W45 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm

Mounting option


D Overlay mm0 9 10 10,5 11 12 13 141,5 6,9 7,9 8,4 8,9 9,9 10,9 11,93 4,8 5,8 6,3 6,8 7,8 8,8 9,8


W45

45°95°

Distance (D)

Cupdistance C

Door

Side

Overlay

Overlay

Distance (D)

Cupdistance C

Door

Side

D Overlay mm0 5,5 6,5 7,0 7,5 8,5 9,5 10,51,5 6,9 7,9 5,0 5,5 6,5 7,5 8,53 4,8 5,8 3,0 3,5 4,5 5,5 6,5


45°

11,3

D Reveal mm0 14 13 12,5 12 11 10 91,5 16,1 15,1 14,6 14,1 13,1 12,1 11,13 18,2 17,2 16,7 16,2 15,2 14,2 13,28 25,3 24,3 23,8 23,3 22,3 21,3 20,3


Reveal

Distance (D)

Cupdistance C

Door

Side



Half overlay

PU 50

TB 43 (press-in) 073 934


screw-on

9 027 941

PU: 50

C = 3 ... 8 mm

45°

11,3

C = 3 ... 8 mm

45°

11,3

49

SpecificationHettich Intermat 9936 W45Snap-on assemblyEccentric depth adjustmentfor 45° face anglesOpening angle 95°

Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge.For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.

Half overlay, cranking 0 mm* Overlay adjustment +2 mm / –3 mm

Scale 1: 1

Hole line

... for D 5 mm

... for D 3 mm

... for D 1,5 mm

... for D 0 mm


Cabi

net

side

X

Cup distancerange C

Scale 1: 1

Hole line

... for D 5 mm... for D 3 mm



Cabi

net

side

Full overlay, cranking 6 mm* Overlay adjustment +2 mm / –3 mm

Cup distancerange C

X

C = 3 ... 8 mm

45°

11,3

50


W45

45°95°

Hole line




Cabi

net

side

Inset, cranking - 17 mm* Reveal adjustment –2 mm / +3 mm

X

Cup distancerange C

Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge.For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.

Scale 1: 1

45°

11,3

19

1,5

19

51


W45

45°95°

Mounting configuration Intermat 9936 W45

D Y Side Gap5 5 4 3,5 3 2 1 0


D Reveal mm5 6,5 5,5 5 4,5 3,5 2,5 1,5


IW = Installation widthDW = Door widthY = RevealDW = IW -(2 x Y)C = Cup distance

Mounting configuration:Intermat 9943 full overlayMounting plate distance (D) = 1,5 mm

Mounting configuration:Intermat 9936 W45 half overlayMounting plate distance (D) = 5 mm

DWY

Y

IWC

Distance (D)

Reveal

Cup d

istan

ce C

Reveal

52

Intermat 9936 W90Fast-assembly hingefor blind corner cabinetsOpening angle 125°

Concealed hinge, snap-on assembly, integrateddoor overlay and eccentric reveal adjustmentOpening angle 95°, cup diameter 35 mmFor corner cabinets with blind panelsIntermat 9936 W90 hinges are snapped on to the mounting plateReveal adjustment via eccentric screw-0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmDoor protrusion adjustment +1,5 mm/-1,5 mm

Mounting plate distances (D):Frameless: 0 mm; 1,5 mm; 3 mm; 8 mm

D Reveal mm5 2,5 2 1,5 1

3 4 4,5 5Cup distance C mm

Minimum revealCup distance Door thickness mmC mm 16 18 19 20 22 243 0,4 0,8 1 1,2 1,8 2,54 0,4 0,8 1 1,2 1,8 2,54,5 0,4 0,8 1 1,2 1,8 2,55 0,4 0,8 1 1,2 1,7 2,46 0,4 0,8 1 1,2 1,7 2,37 0,4 0,7 0,9 1,1 1,6 2,28 0,4 0,7 0,9 1,1 1,6 2,1

W9090°

95°

28*

X

11,3

A

min. 62 mm11,3

The hinges are adjusted correctly ex factory. The door protrusion can be adjusted if necessary. Turn screw (A) clockwise: The door protrusion can be adjusted by up to 3 mm (+1,5 mm/–1,5 mm).

Mounting example Calculating distance

Side

Door protrusion

Door

RevealCup distance C

Dist

ance

Distance = 5 mm - door protrusion

The back of the door and front panel will be flush if amounting plate with distance 5 mm is used.

Dist

ance

5 m

m

* The hole distance X, cup distance C and the revealmust always add up to 28!

Cup distance Reveal mmC mm 0 0,5 1,0 1,5 2,0 2,5 3,0

3 25,0 24,5 24,0 23,5 23,0 22,5 22,03,5 24,5 24,0 23,5 23,0 22,5 22,0 21,54 24,0 23,5 23,0 22,5 22,0 21,5 21,04,5 23,5 23,0 22,5 22,0 21,5 21,0 20,55 23,0 22,5 22,0 21,5 21,0 20,5 20,05,5 22,5 22,0 21,5 21,0 20,5 20,0 19,56 22,0 21,5 21,0 20,5 20,0 19,5 19,07 21,0 20,5 20,0 19,5 19,0 18,5 18,08 20,0 19,5 19,0 18,5 18,0 17,5 17,0

Calculating hole distance "X"

X + cup distance C + reveal = 28

Side

Door



PU 50

TB 43 (press-in) 077 710

Inset


screw-on drill-in

9 015 115 9 013 069

PU: 400 PU: 800

53



C = 3 ... 5,5 mm

-30°

12,8

60°

-30°12,8

Intermat 9944 W -30Fast-assembly hingefor negative face angleOpening angle 125°

Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmFor corner cupboards and cabinets with -30° face angleIntermat 9944 W -30 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +1,5 mm/-1,5 mm.

Mounting option

D Overlay mm0 15 16 16,5 17 17,51,5 13,3 14,3 14,8 15,3 15,83 11,6 12,6 13,1 13,6 14,18 5,8 6,8 7,3 7,8 8,3

3 4 4,5 5 5,5Cup distance C mm

W-30

125°-30°

Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 1,3 1,6 1,9 2,3 2,8 3,9 5,34 1,3 1,6 1,9 2,3 2,7 3,7 54,5 1,2 1,5 1,8 2,2 2,6 3,6 4,95 1,2 1,5 1,8 2,1 2,6 3,5 4,85,5 1,2 1,5 1,8 2,1 2,5 3,4 4,6

Overlay

Distance (D)

Cupdistance C

Door

Side

Note:Drawings on this page are to full scale and show the hinges plus mounting platedistances. By drawing in the required cup distance C (3-5,5 mm), the door overlay can be measured directly from the applicabledistance line.The distance from the cabinet front edge to X on the selected distance line is alsoequal to the hole line distance from thecabinet front edge.

Scale 1: 1

Hole line


... for D 1,5 mm

... for D 0 mm


Cabi

net

side

Cup distancerange C

X

PU 50

TB 43 (press-in) 073 938

Full overlay

54



Intermat 9944 W -45Fast-assembly hingefor negative face angleOpening angle 125°

Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmFor corner cupboards and cabinets with -45° face angleIntermat 9944 W -45 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +1,5 mm/-1,5 mm

Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 1,3 1,6 1,9 2,3 2,8 3,9 5,34 1,3 1,6 1,9 2,3 2,7 3,7 54,5 1,2 1,5 1,8 2,2 2,6 3,6 4,95 1,2 1,5 1,8 2,1 2,6 3,5 4,85,5 1,2 1,5 1,8 2,1 2,5 3,4 4,6

W-45

125°-45°

45°

-45°12,8

Mounting option

D Overlay mm0 13 14 14,5 15 15,51,5 10,9 11,9 12,4 12,9 13,43 8,8 9,8 10,3 10,8 11,38 1,7 2,7 3,2 3,7 4,2

3 4 4,5 5 5,5Cup distance C mm

Distance (D)

Side

Cupdista

nce C

Door

Overlay

PU 50

TB 43 (press-in) 077 721

Full overlay

-45°

C = 3

... 5,5

mm

12,8

Scale 1: 1

Hole line




Cabi

net

side

Cup distancerange C

XNote:Drawings on this page are to full scale and show the hinges plus mounting platedistances. By drawing in the required cup distance C (3-5,5 mm), the door overlay can be measured directly from the applicabledistance line.The distance from the cabinet front edge to X on the selected distance line is alsoequal to the hole line distance from thecabinet front edge.

55

Intermat 9931Fast-assembly hingefor corner cabinet folding doorsOpening angle 50°/90°

Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 50°/90°, cup diameter 35 mmFor corner cabinets with folding doorsStandard Hettich cup holes are used for the door elementsCutaway or special holes are not requiredIntermat 9931 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mmHeight adjustment via mounting plate +2 mm/–2 mm

Order no. PU

TB 43 (press-in) 045 038 50

90°50°

At the start of its swing, the door element opens about 50° on the handle side.This ensures that the whole corner cabinet door moves clear of any adjacent doors ordrawer fronts.In the open position, the two door elements form a straight line. The cabinet interior is fully accessible for user convenience.The self-closing feature eliminates the need for a catch on the handle side.

Features:� All cup holes in one door� Hairline reveal possible between door elements� No cutaway required in cup holes� Identical door width for both elements� Simple adaptation to door thickness by diagonal adjustment� Identical cup distance on both sides of attached door� Hole line distance in free door 37 mm

Features:� Identical door elements� No cutaway required in cup holes� Simple adaptation to door thickness by diagonal adjustment� Hole line distance in attached door 41 mm

Cabinet hinge, e.g. wide angle hinge

Adjustment

Depth adjustment

Side adjustment

Viewed"free" door

Hairline reveal

Reveal

Reveal

50°

90°

37*

Cabinet hinge, e.g. wide angle hinge

Diagonaladjustment

Depthadjustment

Sideadjustment

Viewed"free" door

Centre reveal5 mm

Reveal

Reveal

50°90°

5

41*

The diagonal adjustment can be used to adjust the hinges for different door thicknessesfrom 16 - 21 mm and different cup distances from 3 - 6 mm.

Calculating distance DExample:C distance 4,5 � D 0 C distance 3,0 � D 1,5

* 41/ *37 = mounting plateLR 37

Calculating distance DExample:C distance 4,5 � D 0 C distance 3,0 � D 1,5



56

Intermat 9904 Fast-assembly hingefor glass doorsOpening angle 95°

Concealed glass door hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, glass door hole diameter 26 mmFor glass doors with panel thickness of 4 - 6,5 mmFor a glass panel thickness from 5,5 mm, order 2 x cup fixing screws(order number 069 611, PU 1000)Intermat 9904 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm.

Mounting option

D Overlay mm0 17,51,5 163 14,58 9,5

5,5Cup distance C mm

Order no. PU

T 1 072 960 50

Full overlay

95°

ø26Glass

D Overlay mm0 7,51,5 63 4,55 2,5


Order no. PU

T 1 072 967 50

Half overlay

D Reveal mm Side0 / 1,5 / 3 / 5 - / 4 / 7 / 11 16

4 / 7 / 10 / 14 195,5

Cup distance C mm

Order no. PU

T 1 072 968 50

Inset

D Reveal mm3 1,55 3,58 6,5


Distance (D)

Glass door

Reveal

Overlay

Side

Cup distance C

Cup distance C


OverlayGlassdoor

Glassdoor

Reveal

Side

Distance (D)Side

Reveal Glass door

Cup distance C

high-gloss gold 040 340 50high-gloss chrome 040 341 50black 070 051 50matt nickel 070 712 50metallic brown 040 342 50

Finish Order no. PUhigh-gloss gold 040 494 50high-gloss chrome 040 495 50black 070 052 50matt nickel 070 713 50

Finish Order no. PU

Decorative cap A Decorative cap B



57

MPL 9000

32

Mounting plate system 9000for Intermat and Ecomat hinges

Distance Total Order no.height

Face frame mounting plateHole distance 32 mm,for frame doors withoverlay, oblong holes for height adjustment±2 mmnickel-plateddie-cast zincPU = 200 pcs

0 mm 8,2 mm 1 076 5384,5 mm 12,7 mm 1 076 539

Fixing with countersunk wood screws ø 4 mm

Side

Frame

Door

40

Face frame mounting plateHole distance 40 mmEccentric height adjustment ±2 mm Mounting plate for overlay doorsnickel-plateddie-cast zincPU = 200 pcs

0 mm 8,2 mm 040 2214,5 mm 12,7 mm 040 222

Side

Frame

Door

Article

3215

Inset face frame mounting plateHole distance 32 mmEccentric height adjustment ±2 mmMounting plate for inset doorsnickel-plateddie-cast zincPU = 200 pcs

1,5 mm 9,7 mm 040 2233,0 mm 11,2 mm 040 2245,0 mm 12,7 mm 040 225

Side

Frame Door

58

MPL 9000

3732

ø5

12

37

32

37

ø5

7,5

min15

32

Mounting plate system 9000for Intermat and Ecomat hinges

Distance Distance Total Order no.Hole line height

Patented screw-on wing mounting plates"Hettich Direkt"Half overlay applicationsfrom 15 mm side panelthickness possible,Hole distance 32 mm,with premounted locatingpegs and asymmetricallypositioned special screws for holes ø 5 x 7,5 mm, oblong holes for heightadjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs

37 mm 0 mm 9,0 mm 10716051,5 mm 10,5 mm 10716063,0 mm 12,0 mm 10716075,0 mm 14,0 mm 10716088,0 mm* 17,0 mm 1071609

Fixing with countersunk wood screws ø 4,5 mm

37 mm 0 mm 9,0 mm 1 071 6651,5 mm 10,5 mm 1 071 6663,0 mm 12,0 mm 1 071 6675,0 mm 14,0 mm 1 071 6688,0 mm * 17,0 mm 1 071 669

Screw-onwing mounting plateHole distance 32 mm,with premounted directfixing screws for holes ø 5 x 12 mm oblong holes for height adjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs

37 mm 0 mm 9,0 mm 1 071 6251,5 mm 10,5 mm 1 071 6263,0 mm 12,0 mm 1 071 6275,0 mm 14,0 mm 1 071 6288,0 mm* 17,0 mm 1 071 629

Screw-onwing mounting plateHole distance 32 mm,with oblong holes ø 5,4 mmfor height adjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs

Article

59

15 37

37

32

12

min.15

37

32

12

min15

15 37

min.


Screw-on wing mounting plate"Hettich Top" for overlay mountingwith pre-mounted chipboard screwsEccentric height adjustment ±2 mm, nickel-plateddie-cast zincPU = 400 pcs

Screw-on wing mounting plate"Hettich Top"for half overlay mountingpossible from 15 mm side panel thicknesswith pre-mounted chipboard screwsEccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs

37 mm 0 mm 8,3 mm 9 008 6831,5 mm 9,8 mm 9 008 6863,0 mm 11,3 mm 9 008 6875,0 mm 13,3 mm 9 008 6898,0 mm 14,3 mm 9 008 690


Hole marking template for screw-on cross mounting plates with pre-mounted chipboardscrews for half overlay applications,Order no. 045 150, PU = 1 pc


Mounting plate system 9000for Intermat and Ecomat hingeswith eccentric height adjustment

min.

Article

32

37

min.15

12

Screw-on wing mounting platewith prefixed 5 mm socketsfor overlay mountingHole distance 32 mm,with premounted fixing screws for holes ø 5 x 12 mmEccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs

37

ø5

7,5

min15

32

Patented screw-on wing mounting plates"Hettich Direkt Top"Half overlay applications from 15 mm side panel thickness possibleHole distance 32 mm,with pre-mounted locating pegs and asymmetrically positioned special screws for drilling ø 5 x 7,5 mm, Eccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs


60

Article

15°

MPL 9000

37

32

5° 10°

32

11,5

ø10

20

32

20

System 9000 mounting plates/angle mounting plates for Intermat and Ecomat hinges


Angle plates may only be used with the following wingmounting plates:

Screw-onwing mounting plateHole distance 32 mm, with oblong holes ø 5,4 mm for height adjustment ±2 mm, nickel-plated steel/*die-cast zincPU = 400 pcs

37 mm 0 mm 9,0 mm 1 071 6051,5 mm 10,5 mm 1 071 6063,0 mm 12,0 mm 1 071 6075,0 mm 14,0 mm 1 071 6088,0 mm* 17,0 mm 1 071 609

Fixing with countersunk wood screws ø 4,5 mm

Angle platefor wing mounting platesilver-grey plasticPU = 50 pcs

37 mm 5° 5,0 mm 079 34910° 10,0 mm 079 350

Simply turn the plastic angle mounting plates toeither increase or decrease the cabinet angle.Plastic angle mounting plates are stackable.

10°5°

InLineknock-in mounting platesHole distance 32 mmknock-in version for drill holes dia. 10 x 11,5 mmparalleleccentric height adjustment ±2 mm,nickel-plated steel die-cast zincPU = 50 pcs

20 mm 1,5 mm 9,5 mm 042 8143,0 mm 11,0 mm 042 8135,0 mm 13,0 mm 042 815

InLinescrew-on mounting platesHole distance 32 mmfor direct fixing with chipboard screw ø 3,5 mm, paralleleccentric height adjustment ±2 mm,nickel-plated steel die-cast zincPU = 50 pcs

20 mm 1,5 mm 9,5 mm 043 0173,0 mm 11,0 mm 043 0185,0 mm 13,0 mm 043 019

3 5 10

3,0 mm

Distance spacer plate for wing mounting plateSilver-grey plasticPU = 50 pcs

37 mm 3,0 mm 3,0 mm 079 3235,0 mm 5,0 mm 079 324

10,0 mm 10,0 mm 079 325

Only suitable for use with screw-on wing mounting plates order no. 1 071 605 – 609 (see page 58)

5,0 mm

10,0 mm

61

Cover capsAccessories

Cover cap for Intermat hinges

Cover cap for Ecomat hinges

Article Finish Order no. PU

Stop attachment white plastic 025 048 1000brown plastic 021 154 1000beige plastic 047 353 1000


Stop attachment, clear plastic 072 120 50self-adhesive clear plastic 046 695 1000


Cover cap for nickel-plated steel 013 300 50Intermat hinges black plastic 048 043 50


Cover cap for nickel-plated steel 079 790 50Ecomat hinges

Stop attachment, self-adhesiveø 8 mm

Stop attachmentfor hole diameter6 mm

ø8

1,5ø6,5

7

kat vorsatz usa - hettich · together with hettich intermat or ecomat hinges this mounting plate...

Documents