Benefi ts• Integrated ABex test system

• Unlimited and freely programmable contacting positions

• Open Platform PXI

• No limit in PCB thickness

• Fixture compatibility to LEON Fixture

• Re-use from manual Fixture in the inline

• Low-cost VG interface or pylon inter-face

• Stackable for minimum fl oorspace

• SMEMA interface

• Unlimited variants and different con-tacting height levels for ICT-FCT

Features• In-Line handler with integrated ABex test system

• ABex analog bus extension default

• Maximum 16 embedded PCB testers in parallel (per chassis)

• 86 ... 1032 nodes

• 86 ... 1536 nodes with underframe

• High fl exibility through vast availability of instruments

• Additional functional test

• Boundary scan test

• In-system programming

• Interchangeable fi xtures

• Contacting from two sides

• High volume test

Applications• In-Circuit Test (ICT)• Electrical Functional Test (FCT)• In-System Programming (ISP)

Automated In-Line Test HandlerIn high volume manufacturing we offer a standard ICT system, based on our fully automated test handler FlexCell NT. The handler integrates well with industry standard board handling equipment including conveyors and short stations. It incorpo-rates the robust ABex - Analog Bus extension - backplane as well as automated board handling, and is an economical volume manufacturing system for electronics manufacturers.

KT LEON INLINE TINY

KT LEON INLINE TINY

WE KNOW HOW TO TEST!

Konrad GmbHFritz-Reichle-Ring 12 – 78315 Radolfzell – GermanyT: +49 (7732) 9815-0

F: +49 (7732) 9815-104info@konrad-technologies.de

©2017 Konrad GmbH. All rights reserved. ABex is a trademark of Konrad GmbH. CVI, Measurement Studio, LabVIEW, National Instruments, NI, ni.com, NI-DAQ, NI-DMM, NI-Switch, NI-VISA, TestStand are trademarks of National Instruments. The mark LabWindows is used by National Instruments under a license from Microsoft Corporation. Windows and .net are registered trademarks of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks of their respective companies.

Additional Informations: www.konrad-technologies.com/leon-inline-tiny

PlatinumAlliancePartner

Technical Data

Machine Confi guration

Transport height: 430 mm ± 20 mm (stand alone)

950 mm ± 50 mm (with Underframe)

Transport width: Max. 310 mm

Interface: SMEMA

Transfer direction: left to right (fi x)

Operating side: front

Fixed rail: front

Panel Dimensions

Panel lenght: Max. 455 mm

Panel width: 50 - 310 mm

Panel thickness: Without limitation

Component clearance: Max. 50 mm top side, max. 30 mm bottom side

Edge support width: 3 mm

Installation Requirements

Power supply: 100V .. 240V AC, 50 Hz - 60 Hz

Power supply system: L1 + N + PE

Power consumption: Typ.: 0,7 kW, max. 3,6 kW

Machine Description

Length x Width x Height: 850 mm x 860 mm x 830 mm

850 mm x 860 mm x 1320 (with Underframe)

Weight: approx. 150 kg

Color: RAL7035 / RAL5023