BV4160/BV4180/BV5160/WR1100/WR1400BV-WRKUBOTA ROUND BALERS AND WRAPPERS

4-ft (1.20m) wide and 5-ft/6-ft (1.65/1.80) tall variable chamber round balers and turntable bale wrappers.

OUR BALER FACTORY

1949 Introduction of the finger wheel rake.

1961 Invention of the rotary tedder.

1974 Invention of the disc Mower conditioner combination.

1958 Invention of the pendulum spreader.

1965 Introduction of the first loader wagon with a rotor cutting unit.

1976 Introduction of the triangular shaped mowing discs.

HAY TOOLs wiTH A PROminEnT HERiTAgEDespite introducing a completely new range of Kubota hay tools, our product range is based on a long and proud history of groundbreaking product innovations. Our hay tool division was originally founded in 1879 and has contributed to the agricultural industry, with an impressive number of product innovations and concepts.

2

OUR BALER FACTORY

manufacturing of Balers andBale wrappersKubota’s baler factory is one of the most modern baler manufacturing sites in the world. The production facility has more than 30 years of baler manufacturing experience. A new modern factory was opened in 1999 to streamline production and comply with LEAN principles.

•HeadquartersfortheKubotaBaleEquipmentDivision.

•BasedinRavenna,Italy.•Manufacturerofroundbalersand

bale wrappers.•Foundedin1922.•Firstbalerintroducedin1958.•A323,000squarefeetroofedfacility.•Currentmanufacturingsiteopened

in 1999.

1982 Launch of the integrated BX swath belt for disc mowers.

1985 Invention of first ISOBUS Terminal.

1989 Invention of the Opticut cutting System for balers.

2011 Introduction of GeoSpread, GPS based section control.

1983 First high density big baler suitable for silage.

1986 Invention of the bale wrapper.

2001 First ISOBUS precision farming terminal.

2013 Launch of Kubota Hay Tools.

3

mORE VALUE in YOUR BALEs

Kubota BV5160 superCut-14 BaleDiameter:4-ft (1.20m) wide and up to 5-ft (1.65m) Tall 47” x 24” - 65” (1.20x0.60-1.65m).

Kubota BV5160R BaleDiameter:4-ft (1.20m) wide and up to 5-ft (1.65m) Tall 47” x 24” - 65” (1.20x0.60-1.65m).

Kubota BV4160 BaleDiameter:4-ft (1.20m) wide and up to 5-ft (1.65m) Tall 47 ”x 31” - 65” (1.20x0.80-1.65m).

Kubota BV4180 BaleDiameter:4-ft (1.20m) wide and up to 6-ft (1.80m) Tall 47 ”x 31” - 71” (1.20x0.80-1.80m).

4

mORE VALUE in YOUR BALEs

Kubota BV5160 superCut-25 BaleDiameter:4-ft (1.20m) wide and up to 5-ft (1.65m) Tall 47” x 24” - 65” (1.20x0.60-1.65m).

Kubota wR1100 MaxBaleSize:4-ft (1.20m) wide and up to 5-ft (1.50m) Tall 47” x 60’’ (1.20x1.50m) - 2650lbs (1200kg).

Kubota wR1400 MaxBaleSize:4-ft (1.20m) wide and up to 5-ft (1.50m) Tall 47” x 60’’ (1.20x1.50m) - 2650lbs (1200kg).

5

KUBOTA PiCK-UP

The large diameter roller crop press

pre-compresses the crop and helps to

even out the flow of material. It provides

a uniform flow of crop into the baler,

reducing the risk of block - ages and

allowing increased intake speeds.

Rugged easily adjustable pick-up guide

wheels are equipped with generous flotation

tyres. The unique compact pick-up drive

design keeps the wheels within the overall

baler width eliminating the need to remove

them for transport.

Inboard driveline for narrow transport

width.

6

KUBOTA PiCK-UP

Designed for narrow Transport width Despiteupto2.20m(79”)workingwidththeKubotaBV4000andBV5000haveatransportwidthonly dependent on road wheel specification thanks to the innovative design of the pickup driveline which is located inboard of the cam track at either end of the pick-up. This uniquedesignfeaturemeansthereisno need to remove the pick-up guide wheelsforroadtransport,reducingunproductive time between jobs.

single Fork Feeder KubotaBV4000isfittedwithacostefficient fork feeder intake system. This system provides direct feed transferintothebalechamber,whilethe wide opening allows almost unrestrictedintakecapacity,forfastand effi cient baling process.

The latest design of Kubota pick-up offersexcellentrakingperformance,cleanlyliftingeventheshortestcrop,thanks to the small diameter pick-up.

The pick-up is designed for high capacity with fast throughput and providesasmoothandevencropflowinto the baler. The roller crop on rotary intake models pre-compresses the cropandhelpstoevenouttheflowofcrop into the baler.

HigH CAPACiTY OF 2.00 AnD 2.20m

Single fork feeder.

7

sUPERiOR inTAKE CAPACiTY

Parallelogram DropFloor system for easy unblocking All models with rotary or pre-chopping intakesystemscomeequippedwiththe new Kubota Parallelogram drop floorsystem,whichbringsfasterandeasier clearing of blockages from the comfort of the tractor cab.

This patented system not only lowers the rear edge of the drop floor as per traditionalsystems,butalsoprovidesadditional space under the front sectionofthefloor,whereablockageis more likely to occur.

Easier removal of intake blockages = more productive time spent baling

8

sUPERiOR inTAKE CAPACiTY

Drop Floor in fully lowered position.Drop Floor in mid position.Drop Floor in working position.

SuperCut-14. SuperCut-25.PowerFeed intake system.

PowerFeed rotor intake forultimate capacity ImpressiveintakecapacitycanbeachievedwiththeKubotaPowerFeedrotor intake system - handling both wetanddrycropswithease,whatevertheconditions.ThePowerFeedrotorwithits´14fullyguidedrotorfingersproactively forces the material into the bale chamber for higher intake speed andcapacity,provinginstantbalestartand evenly shaped bales.

superCut-14 TheSuperCut-14knifechoppingsystemprovidesafastandefficientcropflowintothebaler.Withachop length of 70mm it is the ideal solutionforproducingtight,densebales.Improvedfermentationand

easier feeding of bales are just two ofthebenefitspre-choppingcanprovide. Each individual knife is spring protected against foreign obstacles.The knife automatically returns to its work position once the obstacle has passed.

superCut-25 TheSuperCut-25knifepre-choppingsystem offers the ultimate solution for short chop baling with a chop length of 40mm. The short and precise chop provides dense and airtight bales for thebestpossiblesilagequality.Theoperatorcanchoosetoengage25,13,12,6or0knives,givingmaximumflexibilityofoperation.Forinstanceit is possible to use half the knives in themorningindifficultanddemanding

conditions and the remaining half in the afternoon,allowingafulldayofbalingto be achieved with optimum chop quality.

Dual Action Knife Protection TheSuperCut-25knifesystemisfittedwithdualactionprotectionagainst foreign objects. Each knife is individually spring protected and can moveintwodirections.Ifasmallerobstaclehitstheknife,itwillpivotbackwards without losing cutting quality.Ifalargerobstaclehitstheknives they can pivot downwards into a safe position. The knife will automatically return to working position once the obstacle has passed.

9

FAsT AnD EFFiCiEnT TwinE AnD nET wRAPPing

great Looking Bales - Time after TimeYou’re sure to leave a field of great looking bales every time you finish a job. Kubota’s front mounted net and twine systems ensure neat and tidy looking bales that are tightly wrapped. This ensures perfect storage and easy handling of the bales.

Twine Box.

Twin tube fast operating twine binding

system.

Both outside twines fed together.

Twine evenly spaced across bale.

Twines crossed over in centre -

no loose ends.

Twine TyingAutomatic twine tying with the fast acting double tube system means simultaneous binding of both edges ofthebale,reducingbindingtimetoa minimum. Over crossing of twines in the centre of the bale provides no loose ends at the end of the binding cycle. The system is fully user programmable to make sure you make the best looking bales in all crop conditions.

10

FAsT AnD EFFiCiEnT TwinE AnD nET wRAPPing

The PowerBind net wrap system allows

the net to extend past the edge of the

bale.

Convenient easy access storage for net

and twine for long working days.

The very low loading height and the very easy threading of the system mean minimum

downtime and maximum time baling.

When the bale is 90% complete the

injection arm moves forward ready for the

net injection.

When the bale is finished the injection

arm instantly places the net into the bale

chamber. Once net is injected, the brake

moves down on to the net roll to tension

the net.

During the wrapping phase the feeder arm

moves back to its´ waiting position. Once

the bale is wrapped the knife is activated,

cutting the net.

PowerBind net wrapKubotaBVseriesbalersareequippedwiththepatentedPowerBindnetwrapsystem.Thesystemhasbeensimplifiedin a number of ways compared with traditionalsystems,withfeedrollershaving been completely eliminated. AdditionallyPowerBindprovidesoneofthe fastest net wrap actions available. This means minimum downtime and maximum time baling.

The net is fed directly into the bale chamberbyaninjectionarminaflatmovement angle keeping the net tight at all times and providing accurate and extremely reliable net injection.

The net is continuously retained by the injectionarm.Whenthebaleis90%complete the injection arm moves forward,readyforthenetinjection.This adds to reliability and productivity as no time is spent picking up the net. InfactKubotaPowerBindisoneofthefastest net wrapping solutions available today,addingmoreuptime.InadditionPowerBindoffersverylowloadingheight,formaximumconvenience and time saving. To replace the empty roll just swing out the shaft and replace it with a new roll.

11

EVERYTHing UnDER COnTROL

Take Full Control The following functions are operated withthecontrolterminal:•Balediameter.•Densityandsoftcoreadjustmenton

the 5100 series.•Balegrowthindicator.•Baleshapeindicationallowing

the operator to adjust the driving pattern for optimal bale formation.

•Twineornettyingselection.•Twineandnettyingadjustment:numberofnetwraps,quantityoftwine(onside,middleandcentre).

•Tyinginformationduringbindingcycle.

•Manualorautomatictyingmode,giving maximum control to the operator.

•Balecounterthatcansaveupto42balecounts:hugepossibilitytorecord values from different fields.

•Hydraulicselectionbetweenpick-up,knivesorDropFlooron5100series.

isOBUs 11783 - get Connected The5100seriesarefullyISOBUS11783 compliant. This means that they will plug directly into an ISOBUScompatibletractorwithoutthe need for a separate terminal. Standardisationofcontrols,easierconnection between tractors and implements,togetherwithpotentiallower machine purchase costs are justsomeofthebenefitsthattheISO11783 standard bring you.

Tellus Go.

12

EVERYTHing UnDER COnTROL

KvernelandGroupMechatronicslead the field in the implementation oftheISOBUSstandardandarefounder members of the Agricultural ElectronicsFederation(AEF)whichcontinues to develop and promote ISOtechnologyinagriculture.

All major tractor and machinery manufacturers are committed to this standard with ever increasing numbers of tractors and machines nowfullyISOcertified-yourassurance of a future proofed machine.WhenoperatingwithanISO11783compatibletractor,anadditional implement specific control boxisnotrequired,savingoncostand complexity.

Focus Control TerminalTheKubotaFocusterminaliseasytolearnandveryintuitive,withfocusonfunctionality and operating simplicity. TheFocusterminalisauniversalcontrol terminal which also can be used with other implements from Kubota and the Kverneland Group.TheFocusterminalgivesyoufullcontrol of all functions from the tractor cab. They are shown on a large and verycleardigitaldisplay.TheFocusterminal monitors and controls all necessary functions with all relevant parameters/information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.

isomatch Tellus gO– Compact isOBUs Terminal IsoMatchTellusGOisafullISOBUSterminalabletocontrolallISOBUSmachines in a very simple way. The compact design makes it easy to integrate in the tractor cab despite the comfortable 7-inch touch screen

allowing perfect machine set-up and control.Withhardkeyscombinedwiththerotaryswitchonrighthandside,fordirect access to main functions while driving.Balercontrolhasneverbeenso easy.

isomatch Tellus TerminalTheIsoMatchTellusisavirtualterminalofferingtwoInterfacescreensinone terminal. The large 12” easily programmable touch screen offers ergonomic use and is designed for longdaysofoperation.Duetotheincreasing number of functionalities thatcanbeaddedtoamachine,suchascameras,theoperatorcanusethebaler interface in the top screen and a cameradisplayinthebottomscreen,tomonitorfinishedbales.Anotherpossibility is to use the baler interface in the top screen and the tractor interface screen at the bottom.

The IsoMatch Tellus Go

and IsoMatch Tellus

terminals can also be

used with other ISOBUS

compatible implements.

Focus.

ISO Match Tellus.

The majority of new tractors are currently still not supplied as standard withfullISOcompatibility,sothe5100 series can be supplied with the Focusterminal(fittedasstandardon4100seriesmodels),orcanbeoptionally specified with the high end IsoMatchTellusGOandIsoMatchTellus colour terminals.

13

KUBOTA BV4160-BV4180

DEnsE BALEs wiTH A TigHT OUTER LAYER

Dry Crop, Hay and straw TheKubotaBV4160andBV4180producegreatqualitybalesinhayand straw. The two versions offer bale diameters from 31” (0.80m) up to 65” (1.65m) and 71” (1.80m) respectively.

A combination of 5 belts and front rollers

provides dense bales with a moderate core

and an easy bale start.

The bale diameter is easily adjusted from the control terminal. The chamber is set to provide dense bales with a moderate core and tight outer layer,whilepressuresettingcanbeadjusted manually.

14

3

2

1

DEnsE BALEs wiTH A TigHT OUTER LAYER

Main bale chamber drive is by heavy duty

1” pitch chain for longer lifetime and

reduced maintenance.

The split drive gearbox on rotor equipped

models ensures that power is distributed

evenly, reducing wear and power

requirement.

TheKubotaBV4000balechamberisequippedwithacombinationofthreerollersandfivewidelacedbelts. This mixed chamber ensures a smooth bale start whatever the intake system,offeringsmoothbalerotationandreducedcroploss,evenindryconditions.

The two aggressive front rollers that come in contact with the crop are constantly cleaned by scrapers that are designed to perform well in all conditions.

HOw THE BALing CHAmBER wORKs

The small pre-chamber at the start of the bale formation ensures well-shaped and dense bales with a moderate core and tight outer layers.

Asthebalegrows,thebelttensioningarm is subjected to steadily increasing resistance from two hydraulic cylinders and a spring tensioner. As the bale diametergrows,sodoesthebale’sdensity.

Theresultisaveryfirmbalewithamoderatecore.Strawbaleswillbe more tolerant to poor weather conditions,whilesilagebaleswillmaintain their shape for improved stacking and easier handling.

15

KUBOTA BV5160

10% 30% 60%10% 30% 60%10% 30% 60%

10% 30% 60%

Intelligent Density 3D

inTELLigEnT DEnsiTY - TigHT BALEs

Pre-selection of bale

density for each zone

of the bale:

core, mid and edge.*

Diameter (D) and

pressure (P) can be

adjusted in three

stages using the

control terminal.*

*Requires proportional

valve, which is

standard on the

BV5160 and optional

on the BV4100 series.

intelligent Density 3D with 3 pre-selected bale density settings making it very easy to choose the correct bale density in different crops

Balingdrystrawand

want the heaviest

bales possible?

Maximumpressure

issetineveryzone.

Balinghay?Softcenter

core to let the bale

breathisset,with

gradually increasing

pressure towards the

outer layer.

Balingwetsilage?

Pressure is reduced

in the center and

midzones.

16

3

2

1

inTELLigEnT DEnsiTY - TigHT BALEs

The Kubota 5100 series are fitted

with 5 durable endless belts without

joiners offering smooth running and low

maintenance.

TheIntelligentDensitybalechamberoffers a combination of three rollers andfiveendlessbelts,offeringsmoothbalerotationandreducedcroploss,even in dry conditions.

The two aggressive front rollers that come in contact with the crop are constantly cleaned by a scraper and are designed to perform well in silage. Theyensureinstantandefficientbalestart with immediate bale formation in all crop conditions.

Asthebalegrows,thebelttensioningarm is subjected to steadily increasing resistance from two hydraulic cylinders and two spring tensioners. As the bale diametergrows,sodoesthebale’sdensity.

The result is a higher density bale withasmalleranddensercore.Strawbales will be more tolerant to poor weatherconditions,whilesilagebaleswill maintain their shape for improved stacking and easier handling.

HOw THE BALing CHAmBER wORKs

The two front rollers with self-cleaning

scrapers are designed to work well in silage

and provide instant bale formation.

Diam

eter

1

Diam

eter

2

Diam

eter

3

17

KUBOTA wR1100

THREE-POinT mOUnTED TURnTABLE wRAPPER

Drop the wrapped bale - all controlled via

the remote control.

...and wrap it while carting already

wrapped bales to the storage site.

Pick-up the bale ...

18

THREE-POinT mOUnTED TURnTABLE wRAPPER

wrapping at storage siteKubotaWR1100seriesarethreepointmounted wrappers with a simple but very reliable way of wrapping silage bales.TheKubotaWR1100isidealfor’wrapandstack’operations.Whenthe bale is being transported to the storagesiteforwrapping,thisthreepoint mounted version is the ideal solution.Itcanbemountedontherear or front hydraulics of the tractor or used as a static machine with an external power pack unit.

Easy OperationOnce the wrapping process isactivated the whole operationruns automatically. You only needto push the button again to unload the wrapped bale. An optional automaticstop ensures that the bale is properly wrapped.

The entire wrapping process of the KubotaWR1100canbecontrolledremotely from the loading tractor. One operator does the entire process of loading,wrappingandstacking.

•Placethebaleonthewrapper,pressonekeyontheremotecontrol,andthe wrapping process starts.

•Thepreviouslywrappedbaleisstacked and the next one picked up while the machine continues wrapping.

•Pressanotherkeywhenwrappingiscompleted and the bale is tipped off.

REmOTE COnTROL FOR EAsY HAnDLing

TheKubotaWR1100isoperatedviacomputer controls with an integratedbalecounter.Also,theoptionalremote control is making it the ideal solution for static use.

19

KUBOTA wR1400

TRAiLED TURnTABLE wRAPPER

Effective, Easy to Operate wrapperTheKubotaWR1400isapull-typewrapper designed for smaller tractors.The machine is very easy to operate.Afullyautomaticfilmcuttercomesstandard on all models.

Clever Design for maximum weight TransferTo allow for increased stability during baleloading,anextendablewheelarm was incorporated into the frame design. This allows bales up to 2650lbs (1200kg) to be loaded without any counter weights on the machine.

gentle UnloadingWidespacedwheelsallowforanexceptionally low turntable height. This design allows the table to be tilted downwards until it nearly touches the ground,reducingdropheightwhenunloading bales. This provides the gentlest possible handling of wrapped bales.Itreducesthechanceoffilmdamage and eliminates the need for a fall damper or drop mat.

20

TRAiLED TURnTABLE wRAPPER

For narrow transport width, the right hand wheel is turned to the inside of the support arm.

Hydraulically operated loading arm with a low loading height provides fast transfer of bale from arm to turntable.

The Kubota WR1400 can be fitted with a bale on end kit. The bale is tipped off gently without damaging the bale.

Turntable with two driven rollers designed

for high bale stability and smooth even

rotation.

Low design of the machine ensures fast

and gentle unloading of the bale with no

need for an extra fall damper.

The Turntable PrincipleTwolargediameterrollers,bothofwhicharedriven,ensureconsistentbale rotation even in the most difficult ofconditions.Fourendlessbeltscarryand rotate the bale evenly during wrapping. The two large diameter side support rollers ensure that the bale is kept in a central position on the rotating table during the wrapping operation.

21

sPECiFiCATiOnsKubota Models WR1100 WR1400

Weight and Dimensions

Transport Length inch (m) 108” (2.75) 170” (4.32)

Transport Width inch (m) 63” (1.62) 99” (2.52)

Transport Height inch (m) 69” (1.75) 76” (1.95)

Weight lbs (kg) 1653 (750) 2249 (1020)

Bale

Max Bale Size (L x D) inch (m) 47”x60” (1.2x1.5)47”x60” (1.2x1.5)

Max Bale Weight lbs (kg) 2650 (1200) 2650 (1200)

Wrapping Table

Mounted Wrapper • -

Pull-Type Wrapper - •Support Rollers/Belts (number) 2/4 2/4

Automatic Film Cutter • •Max. Wrapping Speed (rpm) 30 30

Pre-stretcher

Pre-Stretcher 29.5” (750mm) • •Max. wrapping speed (rpm) 30 30

Operations

Manual Cable Control (M) - •Electro Hydraulic Joystick (J) - •Programmable Computer (C) • -

Remote Control (C) o -

Oil Consumption (l/min) 28 28

Wheels and Axles

10.0/80-12 - • Options

Film Roll Magazine - o

Adapter Kit for 20" (500mm) Film Spool o o

Bale And Wrap Counter • •Auto-Stop at End of Wrapping Cycle • •Film End/Tear Sensor (C) o -

Road Lights - o

• = standard o = optional - = not available

Kubota Models BV4160 BV4180 BV5160R BV5160 SC14 BV5160 SC25

Weight and Dimensions

Length inch (m) 176” (4.48) 176” (4.48) 176” (4.48) 176” (4.48) 176” (4.48)

Width inch (m) 99” (2.52) 99” (2.52) 99” (2.52) 99” (2.52) 99” (2.52)

Height inch (m) 106” (2.70) 109” (2.78) 106” (2.70) 106” (2.70) 106” (2.70)

Weight lbs (kg) 5952 (2700) 6261 (2840) 6592 (2990) 7165 (3250) 7760 (3520)

Bale chamber

Diameter Min inch (m) 31” (0.80) 31” (0.80) 24” (0.60) 24” (0.60) 24” (0.60)

Diameter Max inch (m) 65” (1.65) 71” (1.80) 65” (1.65) 65” (1.65) 65” (1.65)

Bale Width inch (m) 47” (1.20) 47” (1.20) 47” (1.20) 47” (1.20) 47” (1.20)

Bale Formation 5 Belts + 3 Rollers 5 Belts + 3 Rollers

Endless Belts - - • • •Belt Width inch (m) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22)

Greasable roller bearings (cen.) - - • • •Bale Ramp o o o o o

Pick-up

Working Width inch (m) 79” (2.00) 79” (2.00) 86” (2.20) 86” (2.20) 86” (2.20)

Number of Tine Rows 4 4 5 5 5

Tine Spacing inch (m) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60)

Windguard Crop Deflector Crop Deflector Roller Wind Guard Roller Wind Guard Roller Wind Guard

Pneumatic Gauge Wheel • • • • •Intake System

Fork Feeder • • - - -

PowerFeed Rotor - - • - -

SuperCut 14 Knives - - - • -

SuperCut 25 Knives - - - - •Knife Protection (on each knife) - - - • •Knife group selection - - - - •Drop floor - - • • •

Driveline

1” Main drive chain • • - - -

1 ¼” Main drive chain - - • • •W-A PTO shaft • • • • •P/U Shear bolt protection • • - - -

P/U Cam clutch protection o o • • •Binding (PowerBind)

Twine only variant - - - - -

Net only variant - - 3 rolls 3 rolls 3 rolls

Net & Twine variant 8 balls+3 rolls 8 balls+3 rolls 8 balls+3 rolls 8 balls+3 rolls -

Operations

Focus terminal • • o o o

IsoMatch Tellus Go terminal o (requiring Isobus Comp. kit) o o o

IsoMatch Tellus terminal o (requiring Isobus Comp. kit) o o o

Isobus compatibility o o • • •Hydraulic outlets 1SA + 1DA 1SA + 1DA 1SA + 1DA + R 1SA + 1DA + R 1SA + 1DA + R

Wheels and Axles

11.5/80-15 • • - - -

15.0/55-17 o o • • •19.0/45-17 - - o o o

500/45-22.5 - - - o o

Others

Reversible drawbar • • • • •PTO (rpm) 540 540 540 540 540

Min. power requirem. (hp) 55 64 64 75 95

• = standard o = optional - = not available22

sPECiFiCATiOnsKubota Models BV4160 BV4180 BV5160R BV5160 SC14 BV5160 SC25

Weight and Dimensions

Length inch (m) 176” (4.48) 176” (4.48) 176” (4.48) 176” (4.48) 176” (4.48)

Width inch (m) 99” (2.52) 99” (2.52) 99” (2.52) 99” (2.52) 99” (2.52)

Height inch (m) 106” (2.70) 109” (2.78) 106” (2.70) 106” (2.70) 106” (2.70)

Weight lbs (kg) 5952 (2700) 6261 (2840) 6592 (2990) 7165 (3250) 7760 (3520)

Bale chamber

Diameter Min inch (m) 31” (0.80) 31” (0.80) 24” (0.60) 24” (0.60) 24” (0.60)

Diameter Max inch (m) 65” (1.65) 71” (1.80) 65” (1.65) 65” (1.65) 65” (1.65)

Bale Width inch (m) 47” (1.20) 47” (1.20) 47” (1.20) 47” (1.20) 47” (1.20)

Bale Formation 5 Belts + 3 Rollers 5 Belts + 3 Rollers

Endless Belts - - • • •Belt Width inch (m) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22) 0.8” (0.22)

Greasable roller bearings (cen.) - - • • •Bale Ramp o o o o o

Pick-up

Working Width inch (m) 79” (2.00) 79” (2.00) 86” (2.20) 86” (2.20) 86” (2.20)

Number of Tine Rows 4 4 5 5 5

Tine Spacing inch (m) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60) 2.36” (0.60)

Windguard Crop Deflector Crop Deflector Roller Wind Guard Roller Wind Guard Roller Wind Guard

Pneumatic Gauge Wheel • • • • •Intake System

Fork Feeder • • - - -

PowerFeed Rotor - - • - -

SuperCut 14 Knives - - - • -

SuperCut 25 Knives - - - - •Knife Protection (on each knife) - - - • •Knife group selection - - - - •Drop floor - - • • •

Driveline

1” Main drive chain • • - - -

1 ¼” Main drive chain - - • • •W-A PTO shaft • • • • •P/U Shear bolt protection • • - - -

P/U Cam clutch protection o o • • •Binding (PowerBind)

Twine only variant - - - - -

Net only variant - - 3 rolls 3 rolls 3 rolls

Net & Twine variant 8 balls+3 rolls 8 balls+3 rolls 8 balls+3 rolls 8 balls+3 rolls -

Operations

Focus terminal • • o o o

IsoMatch Tellus Go terminal o (requiring Isobus Comp. kit) o o o

IsoMatch Tellus terminal o (requiring Isobus Comp. kit) o o o

Isobus compatibility o o • • •Hydraulic outlets 1SA + 1DA 1SA + 1DA 1SA + 1DA + R 1SA + 1DA + R 1SA + 1DA + R

Wheels and Axles

11.5/80-15 • • - - -

15.0/55-17 o o • • •19.0/45-17 - - o o o

500/45-22.5 - - - o o

Others

Reversible drawbar • • • • •PTO (rpm) 540 540 540 540 540

Min. power requirem. (hp) 55 64 64 75 95

• = standard o = optional - = not available

Computer Control (C)Machinesequippedwithcomputer(C)controlhaveafullyautomatedwrapping cycle allowing stress free high output operation for long days in thefield.

mechanical Cable Control (m)Themanualversion(M)isoperatedviaflexiblecablecontrolledlevers.Awrap and bale counter comes standard toallowforoptimalcontroloffilmlayers,aswellasthenumberofbaleswrapped. An automatic table stop is also controlled by this bale and wrap counter.

Joystick Control (J)The semi-automatic joystick gives proportional control of all functions for silky smooth operation. Once wrapping has commenced the joystick can be released for hands free operation until the correct number of wraps have beenapplied,atwhichpointthetableautomatically stops rotating.

Remote Control (R)This optional remote control is particularly appreciated on the tractor mounted version for its high output. Placethebaleonthewrapper,pressonekeyontheremotecontrol,andthe wrapping process starts. The previously wrapped bale is stacked and the next one picked up while the machine continues wrapping.

COnTROL FUnCTiOns, BALE wRAPPERs

23

A140508240-CA-GB.Printed03.2016

KUBOTA CANADA LTD.KubotaCanadaLtd.HeadOffice:590014thAvenue,Markham,OntarioL3S4K4Tel(905)294-7477

Visit our web site at: www.kubota.ca

The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Some of the items pictured in this brochure are optional and not standard equipment. Please consult your local Kubota dealer for warranty, safety or product information. For your safety, Kubota strongly recommend the use of a seat belt in all applications. ©2016KubotaCanadaLtd.