kwr-tds-kwr621 fda-20160314 technical data sheet for ... · elongation at yield astm-d638 10 %...
TRANSCRIPT
KW PlasticsPCR TECHNICAL DATA SHEET
KWR621 FDA
PROPERTY
REGULATORY
Copolymer Polypropylene Post-Consumer ResinInjection Molding
Melt Flow ASTM-D1238 10.0 g/10 minutes Specific Gravity ASTM-D792 0.915 g/mlElongation at Yield ASTM-D638 10 % Tensile Yield Strength ASTM-D638 3,900 psi Flexural Modulus ASTM-D790 175,000 psi Notched Izod Impact ASTM-D256 1.4 ft-lb/inch
CONEG Compliant <100 ppm total REACH / SVHC CompliantFDA NOLHealth Canada NOL
NOTE: While this information is presented in good faith and believed to be accurate, KW does not guarantee satisfactory results fromreliance upon such information and disclaims all liability for any loss or damage arising out of its use. No information contained herein
is to be construed as a recommendation to use this product in conflict with any patent.
ISO 9001: 2008 registered, ISO/ IEC 17025: 2005 accredited laboratories, C.O.A. on every lot.
CHARACTERISTICS
KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.
QUALITY
Good impact resistance. Available as medium gray in color. Food grade PP, in compliance withFDA NOL suitable for use in the fabrication of disposable food service items, such as disposablecutlery, soup containers, and hot and cold drink cups and the manufacture of reusable crates orpallets for holding relatively large quantities of fresh, unwrapped product and shelled eggs underroom temperature and below (Conditions of Use C-G) in levels up to 100% content.
KWR-TDS-KWR621 FDA-20160314 TMB
1 Sanders Road Troy, AL 36081 | 334.566.1563 | 800.633.8744 | kwplastics.com