kyocera taskalfa ci mfp copy guide - welcome to city€¦ · density adjustment use this to make a...
TRANSCRIPT
![Page 1: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/1.jpg)
Created by Danwood Change Management July 15 v1.1
Kyocera Taskalfa MFPCopying Guide
![Page 2: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/2.jpg)
This page is intentionally left blank
![Page 3: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/3.jpg)
Index
1. Control Panel.2. Quick Copy.3. Paper Trays.4. Density Adjustment.5. Reduction/Enlargement.6. Combine Originals.7. Staple/Punch.8. Booklet Mode.
These instructions are a quick guide only: For detailed instructions, please refer to the manuals supplied with your device orDownload from www.kyocera.eu
![Page 4: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/4.jpg)
Control Panel
1. Start Key2. Reset Key (All settings back to default)3. Function Keys (Copy, Fax, Send a scan)4. Colour Modes coloured toners )
1
2
34
1
![Page 5: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/5.jpg)
Quick Copy
1. Adjust side fences to correct width.
2. To make a Copy:Place document on the feeder (face up).Or place on the glass (face down).
3. Press copy on the home screen.
4. Key in the number of copies required.
5. Then press the GREEN Start key.
2
1.
2.
4.
5.
3.
![Page 6: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/6.jpg)
Paper Trays
1. If Auto is selected the paper size is automatically matched to the size of your original document.
2. To manually select a Paper Tray from the Quick Setup Tab select Paper Selection.
3. Then select the required tray then OK.
Press the GREEN Start key to copy.
3
1
2
3
Transparencies, Labels, Cardstock etc. must be placed in the MP Tray.
![Page 7: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/7.jpg)
Density Adjustment
Use this to make a copy lighter or darker.
1. Select the Quick Setup tab.
2. Density option.
3. Select the required density required 0 is the default setting if you select -1 the copies will be lighter +1 the copies will be darker. Make your selection then press OK.
Place your originals in the feeder or on the glass.
Key in the number of copies required.
Press the Green start key.
4
1
2
3
![Page 8: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/8.jpg)
Reduction/Enlargement
5
1
2
34
5
6
7
1. From the Quick Setup tab.
2. Select the Zoom Key.
3. Select Standard Zoom.
4. Preset Enlargements.
5. Preset Reductions.
6. Zoom in 1% increments.
7. Auto will automatically reduce or enlarge the original to fit onto the selected paper.
TIP: If you insert an A4 original and select A3 paper the machine will Auto select 141%.
Select the required Reduction /Enlargement press OK then
press the Green Start Key.
![Page 9: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/9.jpg)
Combine Originals
1. Select Combine.
2. 2 in 1 combines 2 documents onto 1 sheet.
3. 4 in 1 combines 4 documents on to 1 sheet.
6
1
2
3
![Page 10: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/10.jpg)
Staple/Hole PunchNOTE: These options are not available on all devices. Only available on devices with an external finisher.
Place your originals on the Document Feeder.
Select the Copy option from the main panel.
1. From the Quick setup screen select Staple/Punch.
2. From the new screen select the required Staple/Punch position.
3. Then check Original Orientation.
4. Press OK then press the Start Key.
1
2
3
Original Top Edge on Top Top Edge on Left
Original Orientation.
7
4
![Page 11: Kyocera Taskalfa ci MFP Copy Guide - Welcome to City€¦ · Density Adjustment Use this to make a copy lighter or darker. 1.Select the Quick Setup tab. 2.Density option. 3.Select](https://reader034.vdocument.in/reader034/viewer/2022042202/5ea2457835804d135d271756/html5/thumbnails/11.jpg)
Booklet Mode
1. Select Layout/Edit
Select Booklet
2. Select the type of originals you are placing in the feeder i.e: single sided or double sided
3.Original - Binding option Select this mode to set the to change the orientation of the originals
4. Finishing – Select which way you want the finished booklet to read i.e: left bind or top bind.
Left BindTop Bind
8
1
23
4