lab number 1 lab results ratings average popstddev z score...2020 fine aggregate round robin report...
TRANSCRIPT
2020 Fine Aggregate Round Robin Report
Lab Number 1
99.9
78.9
Total Percent Passing the #4 Sieve
38.8
19.8
9.6Total Percent Passing the #50 Sieve
3.4
1.30
5
3
4
4
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.21
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.06
0.13
-1.72
-1.31
-1.13
-0.84
-0.76
-0.06
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 2
99.9
85.5
Total Percent Passing the #4 Sieve
48.7
26.8
12.8Total Percent Passing the #50 Sieve
4.6
1.34
5
4
4
4
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.83
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.12
0.13
1.07
1.06
1.01
0.80
0.49
0.00
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 3
100.0
80.0
Total Percent Passing the #4 Sieve
41.0
23.0
11.0Total Percent Passing the #50 Sieve
4.0
1.42
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.06
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.41
0.47
-1.25
-0.78
-0.16
-0.12
-0.14
0.13
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 4
100.0
84.0
Total Percent Passing the #4 Sieve
48.7
25.8
13.0Total Percent Passing the #50 Sieve
4.8
1.60
5
5
4
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.94
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.78
0.47
0.43
1.06
0.70
0.91
0.70
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 5
98.5
78.9
Total Percent Passing the #4 Sieve
39.3
20.6
9.2Total Percent Passing the #50 Sieve
2.4
0.20
0
3
4
5
4
3
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.94
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.78
-4.65
-1.72
-1.19
-0.89
-1.05
-1.81
-1.84
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 6
98.8
81.7
Total Percent Passing the #4 Sieve
42.8
22.8
10.8Total Percent Passing the #50 Sieve
3.5
0.70
0
5
5
5
5
5
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.80
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.21
-3.62
-0.54
-0.35
-0.22
-0.22
-0.66
-1.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 8
100.0
80.5
Total Percent Passing the #4 Sieve
42.1
22.3
10.7Total Percent Passing the #50 Sieve
4.0
1.39
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.99
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.62
0.47
-1.04
-0.52
-0.37
-0.28
-0.14
0.08
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 9
99.9
82.0
Total Percent Passing the #4 Sieve
42.2
22.2
10.4Total Percent Passing the #50 Sieve
3.8
1.21
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.00
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.59
0.13
-0.41
-0.50
-0.40
-0.43
-0.35
-0.21
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 10
100.0
83.5
Total Percent Passing the #4 Sieve
44.0
23.5
11.4Total Percent Passing the #50 Sieve
4.8
4.50
5
5
5
5
5
5
0
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.27
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.25
0.47
0.22
-0.07
0.00
0.08
0.70
5.11
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 12
99.8
84.9
Total Percent Passing the #4 Sieve
43.6
24.9
12.1Total Percent Passing the #50 Sieve
4.9
1.61
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.90
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.90
-0.21
0.81
-0.16
0.43
0.44
0.80
0.44
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 14
99.8
81.6
Total Percent Passing the #4 Sieve
43.1
23.1
11.8Total Percent Passing the #50 Sieve
4.6
1.66
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.30
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.34
-0.21
-0.58
-0.28
-0.13
0.29
0.49
0.52
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 16
99.9
83.9
Total Percent Passing the #4 Sieve
47.0
25.0
13.1Total Percent Passing the #50 Sieve
4.9
1.55
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.15
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.13
0.13
0.39
0.65
0.46
0.96
0.80
0.34
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 18
100.0
87.6
Total Percent Passing the #4 Sieve
54.4
31.9
16.4Total Percent Passing the #50 Sieve
6.4
1.99
5
3
2
1
1
2
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 0.59
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.86
0.47
1.95
2.42
2.57
2.65
2.37
1.05
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 19
99.9
83.6
Total Percent Passing the #4 Sieve
46.4
25.2
12.4Total Percent Passing the #50 Sieve
4.9
1.67
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.51
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.99
0.13
0.27
0.51
0.52
0.60
0.80
0.53
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 20
100.0
83.7
Total Percent Passing the #4 Sieve
46.5
26.0
12.4Total Percent Passing the #50 Sieve
4.8
1.77
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.63
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.36
0.47
0.31
0.53
0.76
0.60
0.70
0.70
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 22
99.9
84.3
Total Percent Passing the #4 Sieve
47.1
26.3
13.4Total Percent Passing the #50 Sieve
5.6
2.09
5
5
5
5
4
3
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
1Percent Loss by T11 (P200 Wash) 2.09
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
2.79
0.13
0.56
0.68
0.85
1.11
1.53
1.21
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 24
100.0
85.8
Total Percent Passing the #4 Sieve
47.9
26.4
12.7Total Percent Passing the #50 Sieve
5.0
1.90
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
2Percent Loss by T11 (P200 Wash) 1.86
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
2.08
0.47
1.19
0.87
0.88
0.75
0.91
0.91
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 28
100.0
84.7
Total Percent Passing the #4 Sieve
46.0
24.4
11.4Total Percent Passing the #50 Sieve
4.5
1.50
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.24
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.15
0.47
0.73
0.41
0.27
0.08
0.39
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 29
100.0
84.0
Total Percent Passing the #4 Sieve
46.7
26.3
12.7Total Percent Passing the #50 Sieve
4.9
1.70
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.39
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.62
0.47
0.43
0.58
0.85
0.75
0.80
0.58
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 32
100.0
82.1
Total Percent Passing the #4 Sieve
41.7
21.2
9.8Total Percent Passing the #50 Sieve
3.6
1.20
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.04
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.47
0.47
-0.37
-0.61
-0.71
-0.74
-0.55
-0.23
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 33
99.6
86.0
Total Percent Passing the #4 Sieve
48.2
26.2
12.7Total Percent Passing the #50 Sieve
4.8
1.56
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.35
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.49
-0.89
1.28
0.94
0.82
0.75
0.70
0.36
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 34
100.0
84.1
Total Percent Passing the #4 Sieve
42.4
21.2
10.1Total Percent Passing the #50 Sieve
3.4
1.14
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.91
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.87
0.47
0.48
-0.45
-0.71
-0.58
-0.76
-0.32
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 35
100.0
82.8
Total Percent Passing the #4 Sieve
44.5
24.3
12.3Total Percent Passing the #50 Sieve
4.9
1.70
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.20
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.03
0.47
-0.07
0.05
0.24
0.55
0.80
0.58
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 37
100.0
82.5
Total Percent Passing the #4 Sieve
41.1
21.1
9.9Total Percent Passing the #50 Sieve
3.8
1.36
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.08
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.34
0.47
-0.20
-0.76
-0.74
-0.69
-0.35
0.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 39
99.8
77.1
Total Percent Passing the #4 Sieve
35.6
17.3
8.1Total Percent Passing the #50 Sieve
3.4
1.40
5
2
2
3
3
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.26
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.22
-0.21
-2.48
-2.07
-1.90
-1.61
-0.76
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 40
99.9
83.4
Total Percent Passing the #4 Sieve
47.9
25.5
11.9Total Percent Passing the #50 Sieve
4.5
1.44
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.26
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.22
0.13
0.18
0.87
0.61
0.34
0.39
0.16
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 41
100.0
80.5
Total Percent Passing the #4 Sieve
36.5
17.4
7.7Total Percent Passing the #50 Sieve
2.7
1.02
5
4
3
3
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.90
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.90
0.47
-1.04
-1.86
-1.87
-1.82
-1.49
-0.52
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 42
99.9
89.3
Total Percent Passing the #4 Sieve
55.3
31.0
15.3Total Percent Passing the #50 Sieve
5.0
1.60
5
1
1
2
2
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.29
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.31
0.13
2.67
2.63
2.29
2.09
0.91
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 43
98.6
81.4
Total Percent Passing the #4 Sieve
42.6
21.8
9.8Total Percent Passing the #50 Sieve
3.0
0.30
0
5
5
5
5
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.31
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.37
-4.31
-0.66
-0.40
-0.52
-0.74
-1.18
-1.68
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 45
100.0
80.6
Total Percent Passing the #4 Sieve
40.6
20.7
9.7Total Percent Passing the #50 Sieve
3.6
1.21
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.80
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.21
0.47
-1.00
-0.88
-0.86
-0.79
-0.55
-0.21
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 47
100.0
84.4
Total Percent Passing the #4 Sieve
47.5
26.9
13.4Total Percent Passing the #50 Sieve
5.1
1.68
5
5
5
4
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.48
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.90
0.47
0.60
0.77
1.04
1.11
1.01
0.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 48
99.8
85.4
Total Percent Passing the #4 Sieve
45.0
23.9
11.4Total Percent Passing the #50 Sieve
4.2
1.46
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 0.63
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.74
-0.21
1.03
0.17
0.12
0.08
0.07
0.20
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 50
99.6
81.2
Total Percent Passing the #4 Sieve
39.5
19.0
8.1Total Percent Passing the #50 Sieve
2.9
1.20
5
5
4
4
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.20
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.03
-0.89
-0.75
-1.14
-1.38
-1.61
-1.28
-0.23
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 51
99.8
80.2
Total Percent Passing the #4 Sieve
38.6
18.4
8.0Total Percent Passing the #50 Sieve
2.7
0.80
5
4
4
3
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.83
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.12
-0.21
-1.17
-1.35
-1.56
-1.66
-1.49
-0.87
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 52
99.9
79.8
Total Percent Passing the #4 Sieve
38.2
18.8
9.0Total Percent Passing the #50 Sieve
3.7
1.45
5
4
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.24
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.15
0.13
-1.34
-1.45
-1.44
-1.15
-0.45
0.18
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 53
99.9
80.1
Total Percent Passing the #4 Sieve
39.7
19.8
9.3Total Percent Passing the #50 Sieve
3.5
1.40
5
4
4
4
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.27
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.25
0.13
-1.21
-1.09
-1.13
-1.00
-0.66
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 54
99.8
84.5
Total Percent Passing the #4 Sieve
44.1
22.7
10.5Total Percent Passing the #50 Sieve
3.9
1.30
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.85
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.06
-0.21
0.65
-0.04
-0.25
-0.38
-0.24
-0.06
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 55
100.0
86.0
Total Percent Passing the #4 Sieve
49.2
27.7
13.3Total Percent Passing the #50 Sieve
5.3
2.00
5
4
4
4
4
4
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.28
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.28
0.47
1.28
1.18
1.28
1.06
1.22
1.07
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 56
99.7
82.7
Total Percent Passing the #4 Sieve
42.0
22.1
9.9Total Percent Passing the #50 Sieve
3.8
1.32
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.02
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.53
-0.55
-0.11
-0.54
-0.43
-0.69
-0.35
-0.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 58
99.8
86.4
Total Percent Passing the #4 Sieve
51.0
28.4
14.0Total Percent Passing the #50 Sieve
5.1
1.60
5
4
3
4
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.25
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.18
-0.21
1.45
1.61
1.50
1.42
1.01
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 59
100.0
84.2
Total Percent Passing the #4 Sieve
45.0
24.0
11.9Total Percent Passing the #50 Sieve
4.3
1.50
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.20
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.03
0.47
0.52
0.17
0.15
0.34
0.18
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 60
100.0
84.8
Total Percent Passing the #4 Sieve
47.9
26.4
13.3Total Percent Passing the #50 Sieve
5.3
2.07
5
5
5
5
4
4
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.31
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.37
0.47
0.77
0.87
0.88
1.06
1.22
1.18
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 61
99.9
76.6
Total Percent Passing the #4 Sieve
30.0
13.3
5.7Total Percent Passing the #50 Sieve
1.9
0.21
5
1
0
0
1
2
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
1Percent Loss by T11 (P200 Wash) 0.25
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-2.92
0.13
-2.69
-3.41
-3.12
-2.85
-2.33
-1.83
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 63
100.0
80.7
Total Percent Passing the #4 Sieve
42.2
21.4
9.5Total Percent Passing the #50 Sieve
2.8
0.10
5
5
5
5
5
4
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.20
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.03
0.47
-0.96
-0.50
-0.64
-0.89
-1.39
-2.00
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 64
99.9
84.2
Total Percent Passing the #4 Sieve
44.4
23.9
11.4Total Percent Passing the #50 Sieve
4.4
1.50
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.19
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.00
0.13
0.52
0.03
0.12
0.08
0.28
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 66
100.0
85.5
Total Percent Passing the #4 Sieve
50.6
29.4
14.5Total Percent Passing the #50 Sieve
5.3
1.82
5
4
3
3
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.48
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.90
0.47
1.07
1.51
1.80
1.68
1.22
0.78
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 69
100.0
84.2
Total Percent Passing the #4 Sieve
46.2
25.1
12.0Total Percent Passing the #50 Sieve
4.5
1.60
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.46
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.84
0.47
0.52
0.46
0.49
0.39
0.39
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 72
99.9
86.3
Total Percent Passing the #4 Sieve
51.1
28.7
14.2Total Percent Passing the #50 Sieve
5.3
1.62
5
4
3
3
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.52
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.02
0.13
1.41
1.63
1.59
1.52
1.22
0.45
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 73
99.9
85.8
Total Percent Passing the #4 Sieve
46.7
22.9
10.2Total Percent Passing the #50 Sieve
3.8
1.41
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.10
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.28
0.13
1.19
0.58
-0.19
-0.53
-0.35
0.11
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 74
100.0
86.1
Total Percent Passing the #4 Sieve
50.4
28.9
14.0Total Percent Passing the #50 Sieve
5.1
1.61
5
4
4
3
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 1.68
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.52
0.47
1.32
1.46
1.65
1.42
1.01
0.44
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 76
100.0
86.9
Total Percent Passing the #4 Sieve
50.4
30.2
16.0Total Percent Passing the #50 Sieve
5.9
1.90
5
3
4
2
2
3
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.58
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.21
0.47
1.66
1.46
2.05
2.45
1.85
0.91
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 77
100.0
84.5
Total Percent Passing the #4 Sieve
48.1
25.8
12.0Total Percent Passing the #50 Sieve
4.8
1.53
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.40
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.65
0.47
0.65
0.91
0.70
0.39
0.70
0.31
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 78
99.9
79.4
Total Percent Passing the #4 Sieve
40.2
20.6
10.1Total Percent Passing the #50 Sieve
3.7
1.25
5
3
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.25
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.18
0.13
-1.51
-0.97
-0.89
-0.58
-0.45
-0.14
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 79
99.9
81.8
Total Percent Passing the #4 Sieve
44.9
24.9
12.5Total Percent Passing the #50 Sieve
4.4
1.46
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.42
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.71
0.13
-0.49
0.15
0.43
0.65
0.28
0.20
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 80
100.0
84.8
Total Percent Passing the #4 Sieve
47.5
25.3
11.9Total Percent Passing the #50 Sieve
3.8
1.08
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.81
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.18
0.47
0.77
0.77
0.55
0.34
-0.35
-0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 81
99.9
84.5
Total Percent Passing the #4 Sieve
48.4
26.2
12.7Total Percent Passing the #50 Sieve
4.2
1.17
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.17
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.06
0.13
0.65
0.99
0.82
0.75
0.07
-0.27
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 82
100.0
85.4
Total Percent Passing the #4 Sieve
47.7
26.5
13.0Total Percent Passing the #50 Sieve
5.0
1.64
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.64
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.39
0.47
1.03
0.82
0.91
0.91
0.91
0.49
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 83
99.8
79.9
Total Percent Passing the #4 Sieve
38.2
18.8
8.6Total Percent Passing the #50 Sieve
2.6
0.03
5
4
4
4
4
3
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.24
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.15
-0.21
-1.30
-1.45
-1.44
-1.36
-1.60
-2.12
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 84
100.0
83.0
Total Percent Passing the #4 Sieve
43.8
22.1
9.7Total Percent Passing the #50 Sieve
3.3
1.17
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.08
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.34
0.47
0.01
-0.11
-0.43
-0.79
-0.87
-0.27
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 85
100.0
83.9
Total Percent Passing the #4 Sieve
46.8
25.7
12.5Total Percent Passing the #50 Sieve
4.8
1.60
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.46
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.84
0.47
0.39
0.60
0.67
0.65
0.70
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 86
100.0
85.8
Total Percent Passing the #4 Sieve
48.7
26.0
12.9Total Percent Passing the #50 Sieve
4.2
0.55
5
4
4
5
5
5
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
2Percent Loss by T11 (P200 Wash) 1.96
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
2.39
0.47
1.19
1.06
0.76
0.85
0.07
-1.28
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 87
99.9
80.1
Total Percent Passing the #4 Sieve
38.3
18.7
8.7Total Percent Passing the #50 Sieve
3.5
1.54
5
4
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.45
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.81
0.13
-1.21
-1.43
-1.47
-1.30
-0.66
0.32
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 88
100.0
87.7
Total Percent Passing the #4 Sieve
52.0
27.7
13.2Total Percent Passing the #50 Sieve
5.0
1.65
5
3
3
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.38
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.59
0.47
2.00
1.85
1.28
1.01
0.91
0.50
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 89
99.7
84.5
Total Percent Passing the #4 Sieve
49.2
26.7
12.7Total Percent Passing the #50 Sieve
4.3
2.61
5
5
4
5
5
5
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.31
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.37
-0.55
0.65
1.18
0.98
0.75
0.18
2.05
Total Percent Passing the 3/8" Sieve 99.7 99.97 0.21 -1.26 4
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 90
100.0
83.6
Total Percent Passing the #4 Sieve
46.3
26.9
13.9Total Percent Passing the #50 Sieve
5.5
1.70
5
5
5
4
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 1.68
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.52
0.47
0.27
0.48
1.04
1.37
1.43
0.58
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 91
100.0
81.7
Total Percent Passing the #4 Sieve
41.5
20.1
9.0Total Percent Passing the #50 Sieve
2.7
0.30
5
5
5
4
4
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.84
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.09
0.47
-0.54
-0.66
-1.04
-1.15
-1.49
-1.68
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 94
99.9
85.6
Total Percent Passing the #4 Sieve
48.3
26.9
13.2Total Percent Passing the #50 Sieve
4.9
1.60
5
4
5
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.33
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.43
0.13
1.11
0.96
1.04
1.01
0.80
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 95
100.0
83.8
Total Percent Passing the #4 Sieve
46.7
25.3
12.8Total Percent Passing the #50 Sieve
5.0
1.74
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.51
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.99
0.47
0.35
0.58
0.55
0.80
0.91
0.65
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 99
100.0
84.8
Total Percent Passing the #4 Sieve
46.1
25.1
12.2Total Percent Passing the #50 Sieve
4.8
1.82
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.47
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.87
0.47
0.77
0.44
0.49
0.49
0.70
0.78
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 100
99.8
86.6
Total Percent Passing the #4 Sieve
48.9
27.3
13.3Total Percent Passing the #50 Sieve
5.0
1.60
5
3
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.14
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.16
-0.21
1.53
1.11
1.16
1.06
0.91
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 102
100.0
80.4
Total Percent Passing the #4 Sieve
39.8
19.1
9.0Total Percent Passing the #50 Sieve
3.3
1.21
5
4
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.11
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.25
0.47
-1.08
-1.07
-1.35
-1.15
-0.87
-0.21
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 105
99.8
84.3
Total Percent Passing the #4 Sieve
47.0
25.3
12.1Total Percent Passing the #50 Sieve
4.6
1.63
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.50
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.96
-0.21
0.56
0.65
0.55
0.44
0.49
0.47
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 106
99.9
80.9
Total Percent Passing the #4 Sieve
40.8
20.7
9.4Total Percent Passing the #50 Sieve
3.5
1.28
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.22
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.09
0.13
-0.87
-0.83
-0.86
-0.94
-0.66
-0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 107
100.0
82.6
Total Percent Passing the #4 Sieve
47.7
25.4
12.2Total Percent Passing the #50 Sieve
3.6
0.46
5
5
5
5
5
5
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.20
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.03
0.47
-0.16
0.82
0.58
0.49
-0.55
-1.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 110
100.0
84.5
Total Percent Passing the #4 Sieve
45.9
24.2
10.9Total Percent Passing the #50 Sieve
3.9
1.26
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.23
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.12
0.47
0.65
0.39
0.21
-0.17
-0.24
-0.13
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 111
99.9
81.7
Total Percent Passing the #4 Sieve
41.8
21.9
10.4Total Percent Passing the #50 Sieve
4.0
1.60
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.11
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.25
0.13
-0.54
-0.59
-0.49
-0.43
-0.14
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 112
99.8
81.9
Total Percent Passing the #4 Sieve
41.9
21.2
10.0Total Percent Passing the #50 Sieve
3.8
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.99
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.62
-0.21
-0.45
-0.57
-0.71
-0.64
-0.35
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 113
99.9
78.9
Total Percent Passing the #4 Sieve
39.0
20.5
10.1Total Percent Passing the #50 Sieve
3.9
1.50
5
3
4
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.00
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.59
0.13
-1.72
-1.26
-0.92
-0.58
-0.24
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 115
99.8
79.4
Total Percent Passing the #4 Sieve
38.9
19.5
9.2Total Percent Passing the #50 Sieve
3.3
1.24
5
3
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.10
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.28
-0.21
-1.51
-1.28
-1.23
-1.05
-0.87
-0.16
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 116
99.9
85.2
Total Percent Passing the #4 Sieve
46.7
26.7
12.3Total Percent Passing the #50 Sieve
4.7
1.42
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.25
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.18
0.13
0.94
0.58
0.98
0.55
0.59
0.13
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 117
100.0
85.1
Total Percent Passing the #4 Sieve
49.2
26.9
13.6Total Percent Passing the #50 Sieve
4.8
1.65
5
5
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.03
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.50
0.47
0.90
1.18
1.04
1.21
0.70
0.50
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 118
99.8
84.2
Total Percent Passing the #4 Sieve
45.7
25.1
12.0Total Percent Passing the #50 Sieve
4.5
1.61
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.11
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.25
-0.21
0.52
0.34
0.49
0.39
0.39
0.44
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 119
99.9
85.6
Total Percent Passing the #4 Sieve
43.6
23.3
10.5Total Percent Passing the #50 Sieve
3.3
1.59
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.50
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.96
0.13
1.11
-0.16
-0.06
-0.38
-0.87
0.41
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 121
100.0
82.0
Total Percent Passing the #4 Sieve
41.0
22.0
11.0Total Percent Passing the #50 Sieve
4.0
1.00
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.91
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.87
0.47
-0.41
-0.78
-0.46
-0.12
-0.14
-0.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 122
99.9
82.1
Total Percent Passing the #4 Sieve
43.3
22.2
10.1Total Percent Passing the #50 Sieve
3.0
0.32
5
5
5
5
5
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.17
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.06
0.13
-0.37
-0.23
-0.40
-0.58
-1.18
-1.65
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 123
100.0
84.5
Total Percent Passing the #4 Sieve
44.4
22.4
10.1Total Percent Passing the #50 Sieve
3.3
0.52
5
5
5
5
5
5
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.22
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.09
0.47
0.65
0.03
-0.34
-0.58
-0.87
-1.32
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 124
99.9
83.4
Total Percent Passing the #4 Sieve
46.1
25.2
12.1Total Percent Passing the #50 Sieve
4.7
1.59
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.46
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.84
0.13
0.18
0.44
0.52
0.44
0.59
0.41
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 125
100.0
84.1
Total Percent Passing the #4 Sieve
47.3
27.6
15.0Total Percent Passing the #50 Sieve
5.5
1.89
5
5
5
4
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 1.80
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.89
0.47
0.48
0.72
1.25
1.93
1.43
0.89
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 127
100.0
80.0
Total Percent Passing the #4 Sieve
38.6
19.0
8.2Total Percent Passing the #50 Sieve
2.6
0.80
5
4
4
4
3
3
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 0.61
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.80
0.47
-1.25
-1.35
-1.38
-1.56
-1.60
-0.87
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 128
99.9
82.9
Total Percent Passing the #4 Sieve
40.7
19.5
8.9Total Percent Passing the #50 Sieve
3.2
1.30
5
5
5
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.10
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.28
0.13
-0.03
-0.85
-1.23
-1.20
-0.97
-0.06
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 129
99.9
82.0
Total Percent Passing the #4 Sieve
45.6
25.2
12.4Total Percent Passing the #50 Sieve
4.5
1.34
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.92
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.84
0.13
-0.41
0.32
0.52
0.60
0.39
0.00
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 130
100.0
81.8
Total Percent Passing the #4 Sieve
43.4
22.2
9.7Total Percent Passing the #50 Sieve
3.0
0.43
5
5
5
5
5
4
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.02
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.53
0.47
-0.49
-0.21
-0.40
-0.79
-1.18
-1.47
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 131
100.0
79.9
Total Percent Passing the #4 Sieve
39.2
20.6
10.0Total Percent Passing the #50 Sieve
3.9
1.42
5
4
4
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.97
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.68
0.47
-1.30
-1.21
-0.89
-0.64
-0.24
0.13
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 133
99.9
78.9
Total Percent Passing the #4 Sieve
36.8
17.6
8.5Total Percent Passing the #50 Sieve
3.2
1.20
5
3
3
3
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.97
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.68
0.13
-1.72
-1.78
-1.81
-1.41
-0.97
-0.23
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 136
100.0
80.0
Total Percent Passing the #4 Sieve
42.0
22.0
11.0Total Percent Passing the #50 Sieve
4.0
0.80
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.81
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.18
0.47
-1.25
-0.54
-0.46
-0.12
-0.14
-0.87
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 137
100.0
79.9
Total Percent Passing the #4 Sieve
39.0
18.8
8.5Total Percent Passing the #50 Sieve
3.3
1.31
5
4
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.86
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.03
0.47
-1.30
-1.26
-1.44
-1.41
-0.87
-0.05
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 138
100.0
77.7
Total Percent Passing the #4 Sieve
37.9
18.6
8.2Total Percent Passing the #50 Sieve
2.8
0.45
5
2
3
3
3
4
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.00
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.59
0.47
-2.22
-1.52
-1.50
-1.56
-1.39
-1.44
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 139
99.9
83.7
Total Percent Passing the #4 Sieve
45.6
24.7
11.3Total Percent Passing the #50 Sieve
4.1
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.38
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.59
0.13
0.31
0.32
0.36
0.03
-0.03
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 140
100.0
80.8
Total Percent Passing the #4 Sieve
40.5
20.8
9.7Total Percent Passing the #50 Sieve
3.7
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.12
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.22
0.47
-0.92
-0.90
-0.83
-0.79
-0.45
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 141
100.0
83.4
Total Percent Passing the #4 Sieve
45.5
24.1
12.4Total Percent Passing the #50 Sieve
4.7
1.60
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.22
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.09
0.47
0.18
0.29
0.18
0.60
0.59
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 142
99.9
84.0
Total Percent Passing the #4 Sieve
47.6
26.6
13.8Total Percent Passing the #50 Sieve
5.6
2.00
5
5
5
5
4
3
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
2Percent Loss by T11 (P200 Wash) 1.88
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
2.14
0.13
0.43
0.79
0.95
1.32
1.53
1.07
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 143
100.0
83.6
Total Percent Passing the #4 Sieve
43.5
21.2
8.9Total Percent Passing the #50 Sieve
2.8
0.30
5
5
5
5
4
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 0.70
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.52
0.47
0.27
-0.18
-0.71
-1.20
-1.39
-1.68
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 144
99.7
79.5
Total Percent Passing the #4 Sieve
34.4
18.4
8.7Total Percent Passing the #50 Sieve
2.8
0.31
5
4
2
3
4
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.89
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.93
-0.55
-1.46
-2.36
-1.56
-1.30
-1.39
-1.66
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 145
100.0
84.8
Total Percent Passing the #4 Sieve
49.5
27.9
13.4Total Percent Passing the #50 Sieve
4.9
1.62
5
5
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.03
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.50
0.47
0.77
1.25
1.34
1.11
0.80
0.45
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 146
99.7
82.9
Total Percent Passing the #4 Sieve
42.7
23.2
11.2Total Percent Passing the #50 Sieve
3.6
0.64
5
5
5
5
5
5
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.95
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.75
-0.55
-0.03
-0.38
-0.09
-0.02
-0.55
-1.13
Total Percent Passing the 3/8" Sieve 99.7 99.97 0.21 -1.26 4
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 147
99.9
82.3
Total Percent Passing the #4 Sieve
45.3
24.4
11.4Total Percent Passing the #50 Sieve
4.2
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.13
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.19
0.13
-0.28
0.25
0.27
0.08
0.07
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 148
100.0
82.6
Total Percent Passing the #4 Sieve
47.1
26.7
13.5Total Percent Passing the #50 Sieve
5.3
1.89
5
5
5
5
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.47
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.87
0.47
-0.16
0.68
0.98
1.16
1.22
0.89
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 149
99.9
81.6
Total Percent Passing the #4 Sieve
41.9
21.8
9.8Total Percent Passing the #50 Sieve
3.2
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.89
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.93
0.13
-0.58
-0.57
-0.52
-0.74
-0.97
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 150
99.9
85.2
Total Percent Passing the #4 Sieve
47.6
25.7
13.3Total Percent Passing the #50 Sieve
5.1
0.16
5
5
5
5
4
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.14
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.16
0.13
0.94
0.79
0.67
1.06
1.01
-1.91
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 152
99.9
84.4
Total Percent Passing the #4 Sieve
45.4
23.9
10.8Total Percent Passing the #50 Sieve
3.9
1.36
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.71
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.49
0.13
0.60
0.27
0.12
-0.22
-0.24
0.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 153
100.0
85.4
Total Percent Passing the #4 Sieve
47.2
26.6
13.2Total Percent Passing the #50 Sieve
5.4
1.80
5
4
5
5
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
3Percent Loss by T11 (P200 Wash) 1.75
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.74
0.47
1.03
0.70
0.95
1.01
1.32
0.74
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 154
99.9
81.0
Total Percent Passing the #4 Sieve
40.9
20.1
8.6Total Percent Passing the #50 Sieve
3.1
1.30
5
5
5
4
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.05
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.44
0.13
-0.83
-0.81
-1.04
-1.36
-1.08
-0.06
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 156
99.7
80.5
Total Percent Passing the #4 Sieve
41.6
21.6
9.6Total Percent Passing the #50 Sieve
3.5
1.32
5
4
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.24
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.15
-0.55
-1.04
-0.64
-0.58
-0.84
-0.66
-0.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 157
99.9
80.9
Total Percent Passing the #4 Sieve
42.9
22.0
10.6Total Percent Passing the #50 Sieve
4.1
1.60
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.00
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.59
0.13
-0.87
-0.33
-0.46
-0.33
-0.03
0.42
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 158
99.8
82.0
Total Percent Passing the #4 Sieve
43.9
23.5
11.2Total Percent Passing the #50 Sieve
4.4
1.30
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.95
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.75
-0.21
-0.41
-0.09
0.00
-0.02
0.28
-0.06
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 159
99.9
83.3
Total Percent Passing the #4 Sieve
46.6
25.2
12.4Total Percent Passing the #50 Sieve
4.6
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.10
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.28
0.13
0.14
0.56
0.52
0.60
0.49
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 160
100.0
85.1
Total Percent Passing the #4 Sieve
46.5
25.6
12.1Total Percent Passing the #50 Sieve
4.4
1.46
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.36
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.53
0.47
0.90
0.53
0.64
0.44
0.28
0.20
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 161
100.0
85.4
Total Percent Passing the #4 Sieve
48.8
26.8
13.2Total Percent Passing the #50 Sieve
5.0
1.50
5
4
4
4
4
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.41
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.68
0.47
1.03
1.08
1.01
1.01
0.91
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 162
99.8
83.6
Total Percent Passing the #4 Sieve
42.8
21.2
9.9Total Percent Passing the #50 Sieve
3.5
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.11
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.25
-0.21
0.27
-0.35
-0.71
-0.69
-0.66
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 164
99.9
83.2
Total Percent Passing the #4 Sieve
45.3
24.4
12.4Total Percent Passing the #50 Sieve
4.9
1.58
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.38
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.59
0.13
0.10
0.25
0.27
0.60
0.80
0.39
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 165
100.0
86.2
Total Percent Passing the #4 Sieve
52.1
31.4
16.3Total Percent Passing the #50 Sieve
6.7
2.38
5
4
3
2
1
1
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
0Percent Loss by T11 (P200 Wash) 2.22
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
3.19
0.47
1.36
1.87
2.41
2.60
2.68
1.68
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 166
99.9
85.4
Total Percent Passing the #4 Sieve
47.8
24.4
12.0Total Percent Passing the #50 Sieve
5.1
2.30
5
4
5
5
5
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.29
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.31
0.13
1.03
0.84
0.27
0.39
1.01
1.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 169
99.9
83.0
Total Percent Passing the #4 Sieve
47.0
27.0
13.3Total Percent Passing the #50 Sieve
5.3
1.74
5
5
5
4
4
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.21
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.06
0.13
0.01
0.65
1.07
1.06
1.22
0.65
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 172
99.9
80.7
Total Percent Passing the #4 Sieve
42.4
22.2
9.7Total Percent Passing the #50 Sieve
2.9
0.30
5
5
5
5
5
4
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.52
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.02
0.13
-0.96
-0.45
-0.40
-0.79
-1.28
-1.68
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 174
99.7
80.7
Total Percent Passing the #4 Sieve
40.2
19.7
8.3Total Percent Passing the #50 Sieve
2.8
1.00
5
5
5
4
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.72
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.46
-0.55
-0.96
-0.97
-1.16
-1.51
-1.39
-0.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 176
100.0
83.7
Total Percent Passing the #4 Sieve
37.3
20.5
12.6Total Percent Passing the #50 Sieve
8.1
3.43
5
5
3
5
5
0
0
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.36
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.53
0.47
0.31
-1.67
-0.92
0.70
4.14
3.38
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 178
99.9
85.0
Total Percent Passing the #4 Sieve
46.3
25.8
12.3Total Percent Passing the #50 Sieve
4.6
1.56
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.33
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.43
0.13
0.86
0.48
0.70
0.55
0.49
0.36
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 179
99.9
83.3
Total Percent Passing the #4 Sieve
43.1
22.1
10.7Total Percent Passing the #50 Sieve
4.4
1.90
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.62
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.33
0.13
0.14
-0.28
-0.43
-0.28
0.28
0.91
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 180
99.8
82.8
Total Percent Passing the #4 Sieve
44.2
23.8
11.7Total Percent Passing the #50 Sieve
4.2
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.32
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.40
-0.21
-0.07
-0.02
0.09
0.24
0.07
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 181
100.0
85.0
Total Percent Passing the #4 Sieve
47.7
26.4
12.9Total Percent Passing the #50 Sieve
4.8
1.50
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.10
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.28
0.47
0.86
0.82
0.88
0.85
0.70
0.26
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 182
100.0
80.5
Total Percent Passing the #4 Sieve
40.8
18.9
8.2Total Percent Passing the #50 Sieve
2.9
1.09
5
4
5
4
3
4
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.96
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.72
0.47
-1.04
-0.83
-1.41
-1.56
-1.28
-0.40
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 185
100.0
82.1
Total Percent Passing the #4 Sieve
43.6
23.1
11.2Total Percent Passing the #50 Sieve
4.1
1.00
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.26
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.22
0.47
-0.37
-0.16
-0.13
-0.02
-0.03
-0.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 186
100.0
86.5
Total Percent Passing the #4 Sieve
46.6
25.3
10.2Total Percent Passing the #50 Sieve
2.9
0.70
5
4
5
5
5
4
4
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.37
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.56
0.47
1.49
0.56
0.55
-0.53
-1.28
-1.03
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 187
99.9
80.7
Total Percent Passing the #4 Sieve
43.1
22.8
10.9Total Percent Passing the #50 Sieve
4.3
1.69
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 0.87
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-0.99
0.13
-0.96
-0.28
-0.22
-0.17
0.18
0.57
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 189
99.9
84.0
Total Percent Passing the #4 Sieve
44.0
22.6
11.3Total Percent Passing the #50 Sieve
4.5
1.70
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.30
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.34
0.13
0.43
-0.07
-0.28
0.03
0.39
0.58
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 190
98.4
78.3
Total Percent Passing the #4 Sieve
38.3
18.8
8.7Total Percent Passing the #50 Sieve
2.6
0.10
0
3
4
4
4
3
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.39
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.62
-4.99
-1.97
-1.43
-1.44
-1.30
-1.60
-2.00
Total Percent Passing the 3/8" Sieve 98.6 99.97 0.21 -6.46 0
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 191
99.6
80.9
Total Percent Passing the #4 Sieve
43.0
22.2
10.5Total Percent Passing the #50 Sieve
3.8
1.37
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.27
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.25
-0.89
-0.87
-0.30
-0.40
-0.38
-0.35
0.05
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 193
99.9
83.4
Total Percent Passing the #4 Sieve
40.8
19.9
8.5Total Percent Passing the #50 Sieve
2.8
0.10
5
5
5
4
4
4
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 0.80
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-1.21
0.13
0.18
-0.83
-1.10
-1.41
-1.39
-2.00
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 194
99.9
83.3
Total Percent Passing the #4 Sieve
45.3
24.2
11.8Total Percent Passing the #50 Sieve
4.3
1.40
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.21
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.06
0.13
0.14
0.25
0.21
0.29
0.18
0.10
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 196
100.0
84.3
Total Percent Passing the #4 Sieve
48.2
25.4
12.3Total Percent Passing the #50 Sieve
4.6
1.52
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.41
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.68
0.47
0.56
0.94
0.58
0.55
0.49
0.29
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 197
99.9
81.9
Total Percent Passing the #4 Sieve
42.0
20.8
9.3Total Percent Passing the #50 Sieve
3.4
0.82
5
5
5
5
5
5
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
2Percent Loss by T11 (P200 Wash) 0.48
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-2.21
0.13
-0.45
-0.54
-0.83
-1.00
-0.76
-0.84
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 199
99.9
84.2
Total Percent Passing the #4 Sieve
45.7
23.0
10.4Total Percent Passing the #50 Sieve
3.0
0.10
5
5
5
5
5
4
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.43
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.74
0.13
0.52
0.34
-0.16
-0.43
-1.18
-2.00
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 200
98.6
84.5
Total Percent Passing the #4 Sieve
50.0
26.9
12.2Total Percent Passing the #50 Sieve
3.3
0.10
0
5
4
4
5
5
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
5Percent Loss by T11 (P200 Wash) 1.44
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
0.77
-4.31
0.65
1.37
1.04
0.49
-0.87
-2.00
Total Percent Passing the 3/8" Sieve 98.6 99.97 0.21 -6.46 0
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 201
98.3
82.5
Total Percent Passing the #4 Sieve
45.7
23.9
11.0Total Percent Passing the #50 Sieve
3.2
0.10
0
5
5
5
5
5
2
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
4Percent Loss by T11 (P200 Wash) 1.61
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
1.30
-5.33
-0.20
0.34
0.12
-0.12
-0.97
-2.00
Total Percent Passing the 3/8" Sieve 98.4 99.97 0.21 -7.40 0
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 202
100.0
77.5
Total Percent Passing the #4 Sieve
33.1
15.3
7.3Total Percent Passing the #50 Sieve
2.5
1.00
5
2
1
1
2
3
5
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
2Percent Loss by T11 (P200 Wash) 0.40
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-2.45
0.47
-2.31
-2.67
-2.51
-2.02
-1.70
-0.55
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below:
2020 Fine Aggregate Round Robin Report
Lab Number 203
99.9
83.8
Total Percent Passing the #4 Sieve
45.1
24.3
11.2Total Percent Passing the #50 Sieve
4.2
2.27
5
5
5
5
5
5
3
Total Percent Passing the #8 Sieve
Total Percent Passing the #16 Sieve
Total Percent Passing the #30 Sieve
Total Percent Passing the #100 Sieve
Total Percent Passing the #200 Sieve
Ratings Lab Results
1.19
Average
99.86
82.97
44.27
1Percent Loss by T11 (P200 Wash) 0.24
23.51
11.24
4.13
1.34
0.32
0.29
2.37
4.19
3.27
1.95
0.96
0.62
PopStdDev Z Score
-2.95
0.13
0.35
0.20
0.24
-0.02
0.07
1.50
Total Percent Passing the 3/8" Sieve 100 99.97 0.21 0.16 5
Rating = 5 corresponds to Z scores no greater than 1.0
Rating = 4 corresponds to Z scores greater than 1.0 but less than or equal to 1.5
Rating = 3 corresponds to Z scores greater than 1.5 but less than or equal to 2.0
Rating = 2 corresponds to Z scores greater than 2.0 but less than or equal to 2.5
Rating = 1 corresponds to Z scores greater than 2.5 but less than or equal to 3.0
Rating = 0 corresponds to Z scores greater than 3.0
If any of the individual results are less than or equal to a rating of 2, perform a brief labortory investigation in an attempt to document the potential
cause of this low rating (e.g. calculation error, equipment, or procedural). The documented results of this investigation should then be put on file in
the laboratory and kept for a period of no less than five years. This documentation should be made available to ODOT upon request. If any of the
individual results are less than or equal to a rating of 1 then the results of a completed laboratory investigation and copy of all calculations should be
immediately submitted to the OMM Aggregate Section. Detailed instructions regarding deadlines and other follow up instructions will be emailed to
these labs. If requested please submit all follow up documentation to: [email protected], or by mail to: OMM Aggregate
Section at 1600 W. Broad St., Columbus, Ohio 43213. Failure to respond in a timely manner may result in loss of S1069 laboratory and associated
producer/supplier prequalification.
The 2020 Round Robin study included a total of 146 participating laboratories. Each participating laboratory's results were entered into a combined
database and analyzed for basic statisics. This report displays the individual lab results submitted to the OMM Aggregate Section, the population
average, population standard deviation, Z score, and rating. The Z score indicates how many standard deviations away from the population average
each reported result is. Each rating is based upon a corresponding Z score range described below: