laird in-building wi-fi antenna solutions · broadband solution in a single radome. • it features...

Laird Company Confidential

LairdSmart Technology. Delivered.

1


Wi-Fi SISO & MIMO Antennas

2


CMM24513S4

3

• The CMM24513S4 is a 4 Port MIMO indoor

wideband omnidirectional ceiling mount antenna.

• It is designed to provide pattern coverage that is

optimized for indoor coverage requirements at

2400-2500 MHz and 5150-5875 MHz

• The antenna features a pattern that has been

specifically shaped to provide optimal

performance from a ceiling mount location.

• The pattern is also very uniform and symmetrical,

providing system integrators with the ability to

precisely determine cell size.


CMM24513S4

4


S2451DBT

5

• The S2451DBT is a dual-band 6 Port MIMO

omnidirectional antenna for use in 802.11n

applications.

• 3 ports are designed to operate at 2.4 GHz and 3

ports are designed to operate at 5 GHz.

• Housed in a compact, low-profile Radome, each

of the six MIMO antenna elements is connected to

the WLAN Access Point via a low loss, plenum-

rated coax pigtail.


S2451DBT

6


OP24516SX

7

• The OP24516SX antenna is an

indoor/outdoor pole mounted

omnidirectional antenna designed for

802.11n applications.

• As a 6-port, 3+3 MIMO antenna, with 3-

ports operating over the 2.4GHz band

and 3-ports assigned to the 5 GHz

band, it provides an optimal 3-element

MIMO solution for each band.

• Features a low profile radome and is

designed to withstand the rigors of

outdoor applications with an IP67

Ingression Protection rating


OP24516SX

8


OP24516DS

9

• The OP24516DS antenna is an indoor/outdoor pole

mounted omnidirectional antenna designed for

802.11n applications.

• As a 6 Port MIMO antenna, each port operates over

the 2.4GHz and 5 GHz bands, providing a

broadband solution in a single radome.

• It features a low profile radome and is designed to

withstand the rigors of outdoor applications with an

IP67 Ingression Protection rating.


OP24516DS

10


OP51508T

11

• The OP51508T antenna is an indoor/outdoor pole

mounted omnidirectional antenna designed for 802.11n

applications.

• Designed as a 3 Port MIMO antenna, each port

operates over the 5GHz band providing a 3-antenna

solution in a single radome.

• Features a low profile radome and designed to

withstand the rigors of outdoor applications with an IP67

Ingression Protection rating.

• The radiation patterns are uniform and symmetrical,

providing high levels signal density into defined

coverage zones.

• This antenna will greatly enhance the performance of

802.11n systems


12

OP51508T


S24493TS

13

• The S24493TS is a dual-band, 2.4-2.5 GHz and 4.9-

5.9 GHz, 3 Port Omni-directional antenna for use in

802.11n MIMO applications.

• Housed in a compact, low-profile PVC/Acrylic

Radome, the antenna can be mounted to a variety of

drop ceiling grids using the integrated spring clips. It

can also be mounted to a flush surface via the four

mounting holes.

• Each of the three MIMO antenna elements is

connected to the WLAN Access Point via a low loss,

plenum-rated coax pigtail.


S24493TS

14


S24517PT

15

• The S24517PT is a dual-band, directional sector antenna for

use in 802.11n MIMO applications. Enclosed in a low-profile

radome, the antenna is mounted using the included

articulating mount.

• Each of the three MIMO antenna elements are connected to

the WLAN Access Point via a low loss, plenum-rated, coax

pigtail.

• The dual-band frequency coverage means that a single type

of antenna can be deployed with any MIMO radio in the 2.4-

2.5 GHz and 5.1-5.9 GHz bands.


PDM245115H

16

• The PDM245115H is a low profile dual band 4-

port directional antenna for use in 802.11n

applications.

• Designed for low sidelobe and front-to-back

performance, the antenna is an excellent choice

for High Density WiFi applications.

• Equipped with two vertically polarized ports and

two horizontally polarized ports, the antenna

takes advantage of both polarization and spatial

separation to mitigate multipath issues.


PDM245115H

17


PDM24519

18

• The PDM24519 antenna is a dual-band 3-port

directional antenna for use in 802.11n MIMO

applications.

• Equipped with two Vertically polarized ports and

a single Horizontally polarized port, the antenna

has been designed to take advantage of both

polarization and spatial separation to enhance

coverage areas populated with obstructions.

• Housed in a compact, low-profile Polycarbonate

Radome and equipped with an articulating arm

the antenna can be wall mounted and oriented to

take full advantage of the antenna’s

directionality.

• .


PDM24519

19


S245112PT

20

• S245112PT is a dual-band, 2.4-2.5 and 5.1-5.9 GHz, 3 Port, directional panel antenna for use in 802.11n MIMO applications.

• Enclosed in a low-profile radome, the antenna is mounted using the included articulating mount

• Each of the three MIMO antenna elements are connected to the WLAN Access Point via a low loss, plenum-rated, coax pigtail.

• The radiation patterns are uniform and symmetrical, providing high-level signal density into defined coverage zones.


S245112PT

21


OC24527

22

• The wideband OC24527 antenna offers full-band

coverage for 802.11b/a/g/n and includes all

hardware required to mount indoors or outdoors.

• The antenna provides the “no compromise”

performance expected from a single-band radio

system in a dual-band radio.

• While many dual-band antennas are a

compromise between the two operating bands,

the Laird Technologies OC24527 provides

fullband coverage and omnidirectional coverage

over both bands.


OC24527

23


Laird

Thank You

24

Smart Technology. Delivered.

laird in-building wi-fi antenna solutions · broadband solution in a single radome. • it features...

Documents