later tasks of lab. 1
DESCRIPTION
Later tasks of Lab. 1. For more details – see the Lab. 1 web-site There will be a 20 min prelab quiz (based on Assignment 1 and 2) at the start of the lab. session. Print out the Lab. 1 web-pages for use as reference during the lab. period. - PowerPoint PPT PresentationTRANSCRIPT
Later tasks of Lab. 1
For more details – see the Lab. 1 web-site
There will be a 20 min prelab quiz (based on Assignment 1 and 2) at the start of the lab. session
2 /27
Print out the Lab. 1 web-pages for use as reference during the lab. period
There will be a short 15-minute in-class quiz at the start of the lab. period – don’t be late
Quiz will be based on knowledge demonstrated during assignments 1 and 2
3 /27
Task 1Download audio-talk-through program If you have not already done so, download and expand
ENCM415Directory.zip file so that you have the correct directory. structure and test driven development environment needed for Laboratory 1.
Download and expand the files in CPP_Talkthrough.zip into your Lab1 directory.
Add the CPP_Talkthrough project in your Lab. 1 directory to the VisualDSP environment -- compile and link.
Download the executable (.dxe) file onto the BF533 processor.
Hook up your CD or IPOD output to the CJ2 stereo input. Hook up your ear-phones to the CJ3 stereo output. Run the CPP_Talkthrough.dxe executable and check that the talk
through program is working.
4 /27
Task 2 -- Convert ProcessDataCPP( ) to ProcessDataASM () – Assign. 2 Q3 In talkthrough.h. add a prototype for your assembly code function
Process_DataASM;
In ISR.cpp change to
// call function that contains user code#if 0 Process_DataCPP(); // Use the C++ version#else Process_DataASM(); // C assembly code routines especially developed for Lab. 1#endif
Right-click on ProcessDataCPP.cpp entry. Use "FILE OPTIONS“ to exclude linking
Use PROJECT | clean project Add your ProcessDataASM.asm file to the project, recompile and link.
Check that your code works More details on the Lab. 1 web pages
5 /27
Set up for Tasks 1 and Task 2
AUDIO-IN
AUDIO-OUT
6 /27
How we are building the volume controller
SWITCHES ON FRONT PANEL
PROGRAMMABLE FLAGS
FIO_FLAG_D Register
YOUR PROGRAM RUNNING ON THE BLACKFIN
LED LIGHTS ON FRONT PANEL
LED-CONTROLREGISTER
EBIU INTERFACE
ProcessDataASM( ) subroutine
A/D D/A Interrupt routine D/AEAR
PHONESA/D
IPODCD
int ReadSwitches( ) void WriteLED(int )
7 /27
Special “power-connector” for Blackfin interface on logic lab. station
8 /27
Special “power-connector” for Blackfin interface on logic lab. station
9 /27
Connect 50-pin cable to Blackfin
10 /27
Connect 50-pin cable to logic lab
Make sure that all 50-pin connections are secure and proper.
Power up the logic lab. station and check that is working
11 /27
Task 3 – Initialize the Programmable flag interface – 16 I/O lines on the Blackfin
Warning – could burn out the Blackfin processor if done incorrectly
You need to set (store a known value to) a number of Blackfin internal registers
Most important ones FIO_DIR – Data DIRection – 0 for input **** FIO_INEN – INterface ENable FIO_FLAG_D – Programmable FLAG Data register
12 /27
Task 4 – Demonstration stream
Final laboratory requirements
Wait for button1 (SW1 – PF8) to be pressed and released (ReadButtonASM() ), then play the sound at half-volume.
Wait for button2 (SW2 – PF9) to be pressed and released, play the sound at normal volume
Each time button3 (SW3 – PF10) is pressed and released, transfer a known value from an array to the LED display (WriteLEDASM( ) ) and check that the expected value is displayed (ReadLEDASM( ) )
Wait for button4 t (SW4 – PF11) o be pressed and released, quit the program (turn off the sound and stop the processor)
Build Initialize_ProgrammableFlagsASM ( ) Modify main( ) and ProcessDataASM( ) so that button-operation and
volume operation works MUST HAVE 50 pin cable connected between logic board and
Blackfin Logic board power supply must be turned on
13 /27
Task 4 – Application stream
Final laboratory requirements
SW1 connected to PF8 -- Mute button (This task) SW2 connected to PF9 -- Gargle button (Task 5) SW3 connected to PF10 -- Volume up (Task 7) SW4 connected to PF11 -- Volume down (Task 7)
Build Initialize_ProgrammableFlagsASM ( ) Modify main( ) and ProcessDataASM( ) so that MUTE-operation
works MUST HAVE 50 pin cable connected between logic board and
Blackfin Logic board power supply must be turned on
14 /27
Task – Gargling operation – Application stream Need to add a simple counter that increments by 1 every
1/44000 s
Use the counter to turn the sound off and on every ½ s
Gargling sound is produced. You need to have a signed demo sheet from a 2nd or 4th
year student. Bonus if not from department Plan ahead – remember that mute button overrides
gargle operation
15 /27
Gargle and Mute – Application stream
int main( ) {
InitializeSwitchInterface( ); // Check Lab. 1 for “exact name needed”InitializeLEDInterface( );
#define SWITCHBITS 0x0F00 // Looking in MIPs notes about // using a mask and the // AND bit-wise operation
// to select “desired bits” while (1) { // Forever loop int switch_value = ReadProgrammableFlagsASM( );
// if switch 1 is on – set volatile mute_on = 1; // other wise set mute_on = 0;
// Variables used by modified ProcessSoundASM()
// if switch 2 is on – set volatile cause_gargle = 1; // other wise set cause_gargle = 0
}
}
16 /27
Application stream Task code --- mute button
PSEUDO CODE
extern volatile boolean mute_on;
void Process_DataASM(void) { if (mute_on = = FALSE)
MakeTheSound( );}
WORRY ABOUT WHAT EX_INTERRUPT_HANDLER( ) MEANS IN LAB. 2
File “interruptservice.cpp”
extern volatile boolean mute_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff
Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;}
17 /27
Task code – Gargle – Application stream
void Process_DataASM(void) { if (mute_on = = FALSE)
if (gargle_on == 0)
MakeTheSound( );}
Some how we want to do the following
Is cause_gargle is true – no sound for ½ s and then sound for ½ s
Do this by changing gargle_on from 1 to 0 to 1 at ½ s intervals?
How? Will the code ALWAYS still work after “both buttons” are released, only work 50% of the time
WORRY ABOUT WHAT EX_INTERRUPT_HANDLER( ) MEANS IN LAB. 2
File “interruptservice.cpp”
extern volatile boolean mute_on;extern volatile boolean cause_gargle;extern volatile int gargle_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;}
18 /27
Profound Procrastination Programming – Application stream
File “interruptservice.cpp”
extern volatile boolean mute_on;extern volatile boolean cause_gargle;extern volatile int gargle_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff
if (cause_gargle == TRUE) TurnGargleOnThenOff( )else gargle_on = 0;
Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;}
WORRY ABOUT WHAT EX_INTERRUPT_HANDLER( ) MEANS IN LAB. 2
File “interruptservice.cpp”
extern volatile boolean mute_on;extern volatile boolean cause_gargle;extern volatile int gargle_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;}
19 /27
Profound Procrastination Programming – Application stream
File “interruptservice.cpp”
extern volatile boolean mute_on;extern volatile boolean cause_gargle;extern volatile int gargle_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff
if (cause_gargle == TRUE) TurnGargleOnThenOff( )else gargle_on = 0;
Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;}
WORRY ABOUT WHAT EX_INTERRUPT_HANDLER( ) MEANS IN LAB. 2
This interrupt routine is executed every 1 / 44000 s
For 22000 of those times we want gargle_on
For the next 220 of those times we want the gargle off
So we develop a counter
20 /27
Profound Procrastination Programming – Application stream
File “interruptservice.cpp”
extern volatile boolean mute_on;extern volatile boolean cause_gargle;extern volatile int gargle_on;void Process_DataASM(void);
EX_INTERRUPT_HANDLER(Sport0_RX_ISR){
…….. /// Lots of good stuff
if (cause_gargle == TRUE) TurnGargleOnThenOff( )else gargle_on = 0;
Process_DataASM( ); // Make the sound occur
…….. // Lots of more good stuff;
}
WORRY ABOUT WHAT EX_INTERRUPT_HANDLER( ) MEANS IN LAB. 2
extern volatile int gargle_on;
void TurnGargleOnThenOff( ) {
static long int count = 0;
count = count + 1; if (count >= 22000) { count = 0;
gargle_on = 1 – gargle_on); } }
Check web-pages to see if TurnGargleOnThenOff( ) is to be written in assembly code or in C++
21 /27
Task 6 – LED interface and Dancing Lights
LED interface setup code provided
Check that you can read switches and make the values appear on the LED
Then – writing in “C++” code (interfaced to your assembly code) – display the amplitude (absolute value) of the sound
22 /27
LED interface and Dancing Lights
LED interface setup code provided
Demo stream Transfer values from a known array to the LED
Application stream Writing in “C++” code (interfaced to your assembly
code) – display the amplitude (absolute value) of the sound – will need to store 32 values in an array and generate (running) average
23 /27
Solving Lab. 1 Task Dancing lights – Application stream
Many different ways – you and your partner work one out
One of the ways is to “call a C++ function” from inside your assembly code routine ProcessDataASM( ). How to do that was handled in Assignment 2
and also provided in detail on the web-pages
24 /27
Task Application stream – Volume control
Writing in C++, develop the final volume control
Note there are test codes available to test out your equipment
This code can be used to test the switches and the LED interface on your board. SwitchToLED.dxe
This is the final version of my code for Lab. 1. DrSmithLab1Final.dxe
25 /27
Information of the marks and what needs to be handed in Hand in at the start of the Thursday tutorial
Sec. 1 – 6th October Sec. 2 – 13th October (Same day as planned prelab. 2 quiz)
Note Lab.1 Section 1 is first session – Sept 26th Section 2 is second session – Oct. 3rd
THERE ARE NO LABS ON THE MONDAY OF THANKSGIVING
Note Lab. 2 Section 2 is first session – Oct. 17th
Section 1 is second session – Oct 24th