lbxx-6516ds-vtm

3
DualPol® Quad Antenna, 806–960 MHz, 65° horizontal beamwidth, RET compatible variable electrical tilt LBXX-6516DS-VTM l Two DualPol® antennas under one radome l Allows multiple carriers without transmit combining losses l Provides one antenna face for tough zoning restrictions l Features field adjustable electrical tilt with multiple phase shifters for excellent RF control l Rugged, reliable design with excellent passive intermodulation suppression l Fully compatible with Andrew Teletilt® remote control system CHARACTERISTICS General Specifications Antenna Type DualPol® quad Brand DualPol® | Teletilt® Operating Frequency Band 806 – 960 MHz Electrical Specifications Frequency Band, MHz 806–896 870–960 Beamwidth, Horizontal, degrees 67 63 Gain, dBd 15.7 15.7 Gain, dBi 17.8 17.8 Beamwidth, Vertical, degrees 7.5 7.0 Beam Tilt, degrees 0–8 0–8 Upper Sidelobe Suppression (USLS), typical, dB 17 17 FronttoBack Ratio at 180°, dB 30 30 Isolation, dB 30 30 VSWR | Return Loss, db 1.4:1 | 15.6 1.4:1 | 15.6 Intermodulation Products, 3rd Order, 2 x 20 W, dBc 150 150 Input Power, maximum, watts 250 250 Polarization ±45° ±45° Impedance, ohms 50 50 Lightning Protection dc Ground dc Ground Product Specifications ©2011 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 1 of 3 4/30/2011

Upload: bhupendra08021986

Post on 21-Apr-2015

179 views

Category:

Documents


7 download

TRANSCRIPT

Page 1: LBXX-6516DS-VTM

DualPol® Quad Antenna, 806–960 MHz, 65° horizontal beamwidth, RET compatible variable electrical tilt  LBXX-6516DS-VTM

 

 l Two DualPol® antennas under one radome  

l Allows multiple carriers without transmit combining losses  

l Provides one antenna face for tough zoning restrictions  

l Features field adjustable electrical tilt with multiple phase shifters for excellent RF control  

l Rugged, reliable design with excellent passive intermodulation suppression  

l Fully compatible with Andrew Teletilt® remote control system  

 

CHARACTERISTICS

  

General Specif ications Antenna Type  DualPol® quad 

Brand  DualPol®   |   Teletilt® 

Operating Frequency Band 806 – 960 MHz 

Electrical SpecificationsFrequency Band, MHz 806–896 870–960Beamwidth, Horizontal, degrees 67 63Gain, dBd 15.7 15.7Gain, dBi 17.8 17.8Beamwidth, Vertical, degrees 7.5 7.0Beam Tilt, degrees 0–8 0–8Upper Sidelobe Suppression (USLS), typical, dB 17 17Front­to­Back Ratio at 180°, dB 30 30Isolation, dB 30 30VSWR | Return Loss, db 1.4:1 | 15.6 1.4:1 | 15.6Intermodulation Products, 3rd Order, 2 x 20 W, dBc ­150 ­150Input Power, maximum, watts 250 250Polarization   ±45° ±45°Impedance, ohms   50 50Lightning Protection   dc Ground dc Ground

Product Specifications

©2011 CommScope, Inc. All rights reserved.All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.

page 1 of 34/30/2011

Page 2: LBXX-6516DS-VTM

  

Mechanical Specif ications Color  Light gray 

Connector Interface  7­16 DIN Female 

Connector Location  Bottom 

Connector Quantity  4 

Radome Material  Fiberglass, UV resistant 

Wind Loading, maximum  1435.8 N @ 150 km/h322.8 lbf @ 150 km/h 

Wind Speed, maximum  241.0 km/h   |   149.8 mph 

  

Dimens ions Depth  165.0 mm   |   6.5 in 

Length  2567.0 mm   |   101.1 in 

Width  549.0 mm   |   21.6 in 

Net Weight  34.5 kg   |   76.1 lb 

  

Remote E lec t r ical T i l t (RET) In format ion Model with Factory Installed AISG 1.1 Actuator  LBXX­6516DS­R2M 

Model with Factory Installed AISG 2.0 Actuator  LBXX­6516DS­A2M 

RET System  Teletilt® 

Regulatory Compliance/Cert i f icat ionsAgency ClassificationRoHS 2002/95/EC Compliant by ExemptionChina RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

  

INCLUDED PRODUCTSDB380­3  Pipe Mounting Kit for 2.4 ­ 4.5 in (60 ­ 115 mm) OD round members 

DB5083D Downtilt Mounting Kit for 2.4 ­ 4.5 in (60 ­ 115 mm) OD round members 

Product SpecificationsLBXX-6516DS-VTM

©2011 CommScope, Inc. All rights reserved.All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.

page 2 of 34/30/2011

Page 3: LBXX-6516DS-VTM

 

Hor izon ta l Pa t te rn Ver t ica l Pa t tern

   

   

Product SpecificationsLBXX-6516DS-VTM

©2011 CommScope, Inc. All rights reserved.All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.

page 3 of 34/30/2011