CONVENTIONSOFDRAFTING

BuildingconstructionSemester1

LECTURE PREPARED BY FACULTY: DEEPIKA SHETTY

Draw the border and tittle block as follows for an A2 size sheet:

Note:Border 1.5cm on top, bottom and right sides2.5 cm on the left sideTittle block as shown in the fig.

DRAWING NO:1 ADRAWING TITTLE: LINES- HORIZONTALDRAW HORIZONTAL PARALLEL LINES AT A SPACING OF 0.5 MM.SEE THAT THE LINES ARE OF UNIFORM THICKNESS AND INTENSITY AS DISCUSSED BEFOREUSE A B LEAD PENCIL ON WHITE A2 SIZE SHEET WITH THE FORMAT AND TITTLE BLOCK AS SHOWN IN THE PREVIOUS SLIDE.

DRAWING NO:1 BDRAWING TITTLE: LINES- ANGULARDIVIDE THE SHEET INTO FOUR PARTS

See That The Lines Are Of Uniform Thickness And Intensity As Discussed BeforeUse A B Lead Pencil On White A2 Size Sheet With The Format And Tittle Block As Shown Before.

DRAW VERTICAL (90 DEGREE) PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW 30 DEGREE PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW 45 DEGREE PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW 60 DEGREE PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAWING NO:1 CDRAWING TITTLE: LINES- VARYING INTENSITY DIVIDE THE SHEET INTO FOUR PARTS

Draw The Lines Of Varying Thickness And Intensity As Shown Above. Each Individual Line Should Be Of Uniform Thickness And Intensity.Use A B Lead Pencil On White A2 Size Sheet With The Format And Tittle Block As Shown Before.

DRAW VERTICAL (90 DEGREE) PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW 30 DEGREE PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW 45 DEGREE PARALLEL LINES AT A SPACING OF 0.5 MM.

DRAW HORIZONTAL PARALLEL LINES AT A SPACING OF 0.5 MM.

References:1. Prabhu Balagopal T.S.,Paul Vincent K., Vijayan C., Building design and

civil engineering drawing (1999), Spades Publishers and Distributers, Calicut.

2. Shah M.G., Kale C. M., Patki S. Y., Building Drawing(2nd edition), Tata McGraw-Hill Publishing Company, New Delhi.

3. IS 962, 1959, reaffirmed 2001, Code of Practice for Architecture and Building Drawing second revision reprint 1993, Bureau of Indian Standards, New Delhi.

4. SP46, 1988r, Engineering drawing practice for schools and colleges, reprint 1988, Bureau of Indian Standards, New Delhi.

5. Ching Francis D.K., Architectural Graphics, 3rd edition, 1996, Van Nostrand Reinhold, USA.