led architectural suspended linear direct/indirect …b elite lightig led architectural suspended...
TRANSCRIPT
LED ARCHITECTURAL SUSPENDED LINEAR DIRECT/INDIRECT SYSTEM
OLS-DI-LED
B E L I T E L I G HT I N G
www.iuseelite.com
LED ARCHITECTURAL SUSPENDED LINEAR DIRECT/INDIRECT SYSTEM
OLS-DI-LED
CORNER 90º(OTHER ANGLES AVAILABLE)
CROSS 90º TEE 90º
APPLICATION: Ambient lighting for glare-free, smooth illumination ideal for institutional, commercial and retail application.PRODUCT FEATURES:• Direct/indirect of 500L, 750L or 1000L lumens per ft. uplight and 500L, 750L or 1000Llumens per ft. downlight• Standard length 2’, 4’ and 8’• Aperture width include 2” and 4”• Rigid aluminum extrusion made out of T6063-T5 aluminum, die cast aluminum endcaps• Optical system offers high efficiency LED light that passes through a smooth acrylic lens for optimal distribution patterns, thus creating a glare-free and even distributionfor your application• Life tested to 50,000 hours of operation to L70• Tested to LM-79 and LM-80 standards• Full ability to tandem mount for continuous run application complete with easy quickconnectsPERFORMANCE: The light engines found in the OLS-DI are rated at 85+ CRI and are available in multiple CCTs: 3000K, 3500K, 4000K and 5000K. Rated and tested to LM-79 and LM-80 standards. The LEDs are also binned to a 3-step MacAdam ellipse to achieve consistent color from fixture to fixture. OPTICS - Fabricated of 20 gauge aluminum. Post painted finish with 95% reflective premium paint.DIFFUSER - Smooth white frosted acrylic lens for glare free light and even distribution. Precision cut, snap in design. 4” lens 3.858” width 2” lens 2.361” width.FABRICATION - Available in uplight and downlight option or uplight and wallwash configuration. Available in 2” and 4” aperture width. Rigid design made with extruded aluminum ensures longevity and endurance. FINISH - Aluminum electrostatic painted in White, Silver or custom colors.MOUNTING - Comes standard with adjustable cable suspension system providing fast installation into a variety of interior heights, including sloped ceilings. ENDCAPS - Rigid aluminum extrusion made out of T6063-T5 aluminum, diecast end caps.STANDARD LENGTHS - All luminaires are supplied in nominal lengths to ensure even illumination. Runs and configurations are available in app. 2’, 4’ and 8’ increments.CRM INSTALLATION - For continuous row mounting, the first fixture in the row will always be the power supplies feed. After plugging in the male and female harnesses, which are supplied with each fixture, they will easily slid together, then secured with two screws from opposite direction in the connecting brackets. This allows for fixtures to be continuously connected with only removing the lenses. There is no need to remove any other parts in the fixture to install the continuous run.ELECTRICAL - Powered by high-quality constant-current power LED drivers which are rated for 50 to 60Hz at 120-277V input, produce less than 20% THD, and have a power factor of .90 to 1.00. Male and Female 18-gauge 6 wire plug connectors are included with every fixture to allow for simple hassle-free continuous wiring. Each fixture must be installed male to female.OPTIONS - Fixtures may be shipped pre-installed with daylight harvesting controls, occupancy sensors, and/or power pack. Available manufacturer options include Lutron, Leviton, Wattstopper, EnOcean, Enlighted, Philips and others. Consult factory for details.QUALITY CONTROL - Every fixture is rigorously tested by our QC Department before shipping.LISTING: c-UL-us - listed for Damp locationAll LED luminaires are rated and tested to LM-79 and LM-80 standards by an independent laboratory.OUR WORD - Our LED system is Life tested to ensure light output of L70 up to 110,000 hrs and L85 up to 65,000 hrs and carries a five-year carefree warranty for parts and components. (Labor not included)
All Corners are fully illuminated, and are shipped pre-fabricated to provide seamless installation of creative designs.
ALSO AVAILABLE IN SURFACE LINEAR DIRECT SYSTEM, RECESSED LINEAR DIRECT SYSTEM, WALL MOUNT LINEAR DIRECT/INDIRECT SYSTEM
LED ARCHITECTURAL LINEAR SYSTEM
LIFE TIME
C A LC U L AT E D
110,000 HRSLIFE TIME
C A LC U L AT E D
65,000 HRS
5.014.81
2.52 4.00
5.014.81
2" 4"
** For list of qualified DLC fixture, please
consult factory
CTUNABLE WHITE SERIES
OLS-DI-LED
Custom
Ordering Information: OLS-DI-LED-2-REC-W8-L6-D500L-U500L-DIM10-MVOLT-35K-85
Single Run
SHAPES
CRRECCUS
- Single Unit- Continuous Run- Rectangle- Custom(Consult Factory) Cont. Run
2, 4 OR 8'
EMERGENCYO-EMG-LED
FINISHWH
SIBK
RAL
- White- Silver- Black- Consult factory
VOLTAGEMVOLT347*
* Consult factoryfor details
WIDTH24
- 2”- 4”
OLS-DI-LED
SERIESOLS-DI-LED-Oracle
SuspendedDirect/Indirect
LED Linear
DIMMING DIM10
DIMSTLUTH
LUT2WLUTFTB
ELDO10.1ELDODALIELDODMX
- 0-10V Dimming(Compatible withLutron GRAFIK Eye,Vive)
- Step Dimming- Lutron HiLum- Lutron 2- Wire- Lutron Fade to Black- EldoLED 0-10V- EldoLED DALI Type 8- EldoLED DMX
CCT30K35K40K50K
CRI85
DIRECTLUMENS
D500LD750L
D1000L
- per ft.- per ft.- per ft.
INDIRECTLUMENS
U500LU750L
U1000L
- per ft.- per ft.- per ft.
TOTAL RUN
LENGTH
WIDTH
Rectangle
DRAW YOUR CUSTOM SHAPE HERE
W L
OTHER OPTIONSFBFSBFRIS
USA
OCGSS
- Internal Fast Blow Fuse- Internal Slow Blow Fuse- Radio Interf. Sensor- Made in America
Compliance- Aircraft Cable
NUMBER OF CIRCUITS1C
(Up and Down Lights Controlled Together)2C
(Up and Down Lights Controlled Individual)
EFFICACY: 111 LM/W
Zonal Lumens SummaryZone Lumens %Lamp %Fixt0-300
0-400
0-600
0-900
0-1800
514.08 N.A. 13.20828.36 N.A. 21.201425.32 N.A. 36.501807.94 N.A. 46.303908.95 N.A. 100.00
Angle In Degrees
450
550
650
750
850
Average 00
4867 4791 47304548 4472 44534200 4123 41233764 3764 37643105 3229 3353
Average 450
Average 900
Luminance Data (cd/sq.m)
05152535455565758590
679.9676.0642.2583.7503.1413.4313.3213.2117.032.50.0
679.9678.6646.1583.7499.2406.9308.1209.3117.033.86.5
679.9670.8637.0574.6494.0401.7306.8209.3117.035.110.4
0 45 90Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0°20°
90°
Candle Power Distribution (Candelas)
750
563
375
188
4-OLS-DI-LED-4-500L-40K-80WATTAGE: 35.1 LUMENS: 3909 TOTAL LUMINAIRE EFFICACY: 111
RC - Ceiling Cavity Reflectance RW - Wall Reflectance
ROOM
CAV
ITY
RATI
O
0 106 106 106 106 98 98 98 98 81 81 81 66 66 66 53 53 53 461 97 92 88 85 89 85 82 79 71 69 66 58 56 55 46 45 44 39
88 81 74 69 81 74 69 64 62 58 55 51 48 46 41 39 37 3280 71 63 58 73 65 59 54 55 50 46 45 41 39 36 33 31 2773 63 55 49 67 58 51 45 49 43 39 40 36 33 32 29 27 2367 56 48 42 62 51 44 39 43 38 34 36 32 29 29 26 24 2062 50 42 36 57 46 39 34 39 33 29 32 28 25 26 23 21 1857 45 37 31 52 42 35 30 35 30 26 29 25 22 24 21 18 1653 41 33 28 49 38 31 26 32 27 23 27 23 20 22 19 16 14
2 3 4 5 6 7 8 9 49 37 30 25 45 35 28 23 30 24 20 25 21 18 20 17 15 1310 46 34 27 22 42 32 25 21 27 22 18 23 19 16 19 16 13 11
80%70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RCRW
Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 20% = PF
0-180 : N/A90-270 : N/ADiagonal : N/A
Spacing Criteria
FLEX SERIESCONTROL OPTIONS
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-1977Oracle by Elite Lighting
Controls Provided by EnOcean
EOSCUOccupancy Sensor
Ceiling Mount
EOSWUOccupancy Sensor
Wall Mount
ELLSUDaylight SensorCeiling Mount
ESRPU/ EDRPUWall Switches
LEVITONWall Switches
902 MHz category
WSS0S-S9WWSS0S-D9W
NWC 300UNavigan Wireless
Commissioner
LEDDULED Zone
Controller 0-10V
LEDRULED Relay Zone Controller 0-10V
Self-powered sensors and switches, combined with LED fixture controllers and a commissioning tool, permit easy configuration, intelligent local control, and seamless integration into building automation systems.
Controls Options to be Installed on the Fixture
Controls Installedon the Fixture
LMFC-011Fixture Will be Shipped Legrand Wattstopper DLM Enabled with LMFC-011 Module Controller Installed on the Fixture. Fixtures will be compatible with Legrand Wattstopper DLM Load Controllers, DLM Sensors, DLM Switches, DLM Remote Control, and DLM Configuration tool.
FSP-202 FSP-212Fixture Will be Shipped with Legrand Wattstopper FSP-202
based (multi-level control on motion and/or daylight contribution) installed.
Fixture Will be Shipped with Legrand Wattstopper FSP-212 (multi-level control based on motion and/or daylight contribution) installed.
FD-301
FS-PP-V2
Fixture Will be Shipped with Legrand Wattstopper FD-301 (Integrated Daylight Dimming Photosensor) installed and FS-PP-V2 Fixture Power Pack.
WATTSTOPPER®
Switches
LMSW-105 LMDM-101
Remote
LMRH-105
Configuration tool
LMCT-100-2
Plug Load Controllers
LMPL-101 LMPL-201
Sensors
LMDC-100 LMLS-400 LMLS-500
FLEX SERIESCONTROL OPTIONS
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-1977Oracle by Elite Lighting
ZL027-N0WPower control module
ZLDNK-4W ZLDNK-8WIntellect™ Keypad Room
Controller (Required)
ZLDNK-1W ZLDNK-2W
Leviton Keypad
Leviton App
Neuron App
Fixture will be shipped with Leviton ZL027-N0W power control module installed on the fixture. Fixtures will be compatible with Leviton ZL00J-D0W sensor control module which can be added in the field for remote mounting. Fixture must be controlled with Leviton Intellect Keypad Room Controller, or Leviton Neuron App.
ZL00J-D0WSensor control module
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-010 0-10V Control Module Installed on theFixture. Fixtures will be compatible with Lutron FC-SENSOR Occupancy/Daylight Sensor or FC-VSENSORVacancy/Daylight Sensor which canbe Added in the Field for RemoteMounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a 0-10V. Driver.
Controls Provided by Lutron
Ceiling Mount Occupancy Sensor
Ceiling Mount Occupancy/Daylight
SensorWall Mount
Occupancy SensorWall Mount
SwitchPico
RemoteDayLight SensorVive Wireless Hub
Controls Installed on the Fixture
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-ECO EcoSystem Control Module Control Module Installed on the Fixture. Fixtures will be compatible with Lutron FC-
SENSOR Occupancy/Daylight Sensor or FC-VSENSOR Vacancy/Daylight Sensor which can be Added in the Field for Remote Mounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a Lutron Driver.
FCJS-010Individual
Fixture Control
FCJS-ECOIndividual
Fixture Control
Lutron App
DFCSJ-OEM-OCCFixture Will be Shipped LUTRON VIVE Enabled with DFCSJ-OEM-OCC* Vive Integral Fixture Control (with Sensing) Installed on the Fixture. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a DMX or Lutron EcoSystem Driver
DFCSJ-OEM-RFFixture Will be Shipped LUTRON VIVE Enabled with LUTRON DFCSJ-OEM-RF* Vive Integral Fixture Control (RF Only) Installed on the Fixture. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a DMX or Lutron EcoSystem Driver.
FLEX SERIESCONTROL OPTIONS
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-1977Oracle by Elite Lighting
PHILIPS-XSR + SNS200Fixture will be Shipped with EasySense SNS200 Sensor installed and PHILIPS-XSR driver. Fixture May Only be Controlled with Philips Field App or Wireless Switches.
Fixture will be Shipped Sensor Ready with SRB Bridge . Fixture will be Compatible with EasySense Sensor SNS200-CMP which can be Added in the Field for Remote Mounting. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer.
SRB
SRB + SNS200Fixture Will be Shipped with EasySense SNS200 Sensor installed and PHILIPS SRB Bridge. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer.
SRB + SNS200-CMPFixture Will be Shipped Sensor Ready with PHILIPS SRB Bridge and EasySense SNS200-CMP Sensor which is Included to be Remote Mounted. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer.
PHILIPS-XSR + SNS200-CMPFixture will be Shipped Sensor Ready with PHILIPS-XSR driver and EasySense SNS200-CMP Sensor which is Included to be Remote Mounted. Fixture May Only be Controlled with Philips Field App or Wireless Switches
Philips EasySense sensors provide luminaire-level control with Occupancy sensing, Daylight harvesting, and Field task tuning.
Controls Provided by PhilipsControls Installed
on the Fixture
Philips Field App
Illumra Wireless Switches
ZBT-S2AWHZBT-S1AWH
CU-E3-1R
Fixture Will be Shipped Sensor Ready with Enlighted CU-E3-1R Control Unit Power Pack. Fixture will be be compatible with Enlighted SU-4E-00 Sensor which can be Added in the Field Remote Mounting. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
PHILIPS-XSRFixture Will be Shipped Sensor Ready with PHILIPS-XSR driver. Fixtures will be be compatible with Enlighted CS-D2 Two-wire sensor which can be Added in the Field for Remote Mounting. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00.
CU-E3-1R + SU-4E-00Fixture Will be Shipped with Enlighted SU-4E-00 Sensor installed and Enlighted CU-E3-1R Control Unit Power Pack. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
Fixture Will be Shipped with Enlighted FS-D22 Two-wire sensor Sensor installed and PHILIPS-XSR driver. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
PHILIPS-XSR + FS-D22
Enlighted Smart Sensors features digital motion, ambient light, and temperature sensing, the device provides autonomous fixture-level control
Controls Installed on the Fixture
Controls Providedby Enlighted
Energy Manager
PoE Network Switch
Programmable with Laptop
Gateway Switch
WS-2-00Enlighted Room
Controller