legend 3 - aermec.us

Legend ................................................................................................................................................................................ 3

Company History ................................................................................................................................................................ 4

About Aermec ....................................................................................................................................................... 5

Air Cooled Units .................................................................................................................................................................. 6

ANK ………........………….………...…………….. 2.5 / 3 / 4 tons ............................................................ 7

ANL ………………………….…............................ 6.5-8 tons ............................................................ 7

NLC ……………………........................................ 15-87 tons ............................................................ 8

NRK ………………………………………….......... 9-40 tons ............................................................ 8

NRB ……………………....................................... 58-231 tons ............................................................ 9

NRB FC ……………………................................. 57-233 tons ............................................................ 9

NRB HP ……………………................................. 54-178 tons ............................................................ 9

NRL 280-750 …………........................................ 14-50 tons .......................................................... 10

NRL 3300-3600 ………….................................... 241-261 tons .......................................................... 10

NRL FC 280-750 …...........………....................... 13-46 tons .......................................................... 11

NRL FC 3600 ……………………………….......... 236 tons .......................................................... 11

NYB …….........…………………………………….. 29 tons .......................................................... 12

NYBi ……………………........…………………….. 29 tons .......................................................... 12

TBA ..................................................................... 90-348 tons .......................................................... 13

TBG .................................................................... 68-316 tons .......................................................... 13

Simultaneous Heating & Cooling ...................................................................................................................................... 14

CPS (Capsule) .................................................... 47, 74, 140 tons .......................................................... 15

NRP 280-750 …...........……................................ 12-45 tons .......................................................... 16

NRP 800-1800 ……........…………...................... 52-120 tons .......................................................... 16

NRP 2000-3600 ……........……………………….. 130-240 tons ......................................................... 16

Water Cooled Units ……………………………………..…………………………..………...................…..…………………… 17

NXP ……………………...…........………………… 31-129 tons .......................................................... 18

NXW ………………………...…............................ 32-139 tons .......................................................... 18

WRL / WRL H ……..………….......………..…….. 15-27 tons .......................................................... 19

WWM …………………………….......................... 31 tons .......................................................... 19

WRK ……………………………………………………………………………………..................…………………….. 20

WWB ….……………………………………………………………………………………………..................…..…….. 21

Air Cooled Screw Chillers ................................................................................................................................................. 22

BSM .................................................................... 85-620 tons .......................................................... 23

Water Cooled Screw Chillers ............................................................................................................................................ 24

BWF .................................................................... 180-600 tons .......................................................... 25

HWF ................................................................... 180-400 tons .......................................................... 25

Heat Recovery and Chilled Beams ............………..………………………………….……....................…………………….. 26

URX CF ……....................................................... 1.6-6 tons .......................................................... 27

EHT ...................................................................................................................................................................... 28

Fan Coils ……...……...………………………………..………………………………….…………………...................……….. 29

FCL ...................................................................................................................................................................... 30

FCW ..................................................................................................................................................................... 30

FCZ P .................................................................................................................................................................. 31

FCZ US USF ........................................................................................................................................................ 31

FCZ I EUP ........................................................................................................................................................... 32

FCZ I EU EUF ...................................................................................................................................................... 32

MZC .................................................................................................................................................................... 33

VED / VEDI .......................................................................................................................................................... 33

Ventilcassaforma ….………………………………………………….….………………...……………..................….. 33

Radiant Cooling ................................................................................................................................................................ 34

Cooling Strip ........................................................................................................................................................ 35

3

AHRI Certification 550/590

For two pipe building

Plug fan

TUV SUD (Canada and United States)

For four pipe building

Axial fan

Cooling and heating

Internet connection (optional)

Twin screw

compressor

Cooling only

Intertek ETL listed (Canada and United States)

Centrifugal compressor

Heating only

Low noise Version (optional)

Scroll compressor

Multipurpose

Network operation (optional)

Plate exchanger

Domestic hot

water (DHW)

Night mode (optional)

Shell and tube exchanger

Freecooling

R134A refrigerant

Building Management System (BMS) integration

Heat recovery

(optional)

R401A refrigerant

Variable multi flow (VMF) compatible (optional)

Water tank

(optional)

R513A (XP10) refrigerant (optional)

Cassette installation

Pump kit (optional)

R1234ze refrigerant

Primary air

5

Aermec was founded in 1963 and is deemed the largest manufacturer of fan coils,

chillers, and heat pumps in Europe. In 2008, Mits Airconditioning Inc. recognized the potential

of the Aermec product line and became the Master Distributor for Aermec products in North

America. Aermec strives to provide the most efficient and innovative HVAC solutions to the

North American market and offers a comprehensive product line:

• Air cooled and water cooled chillers and heat pumps

• Air cooled heat pumps with inverter compressors (small)

• Total or partial heat recovery and free cooling chillers

• Simultaneous heating and cooling heat pumps

• Fan coils and innovative zoning

• Screw chillers

• Modular chillers

• Modular inverter chillers / free cooling

• Heat pump hot water boosters

• Chilled beams

• Packaged heat pump and energy recovery unit 100% percent fresh air

All Aermec products are manufactured at Aermec headquarters in Bevilacqua, Italy.

Aermec has significantly invested in research and development and currently has the largest

AHRI and Eurovent certified test chamber in Europe.

As a leader of after sales support in the industry, Aermec is dedicated to providing

superior technical assistance to sales representatives, technicians, and engineers alike.

Aermec has positioned itself as the premiere support company in the industry and continues to

provide customers with innovative and efficient HVAC solutions.

7

ANK

Heat Pump

Single Phase

220/1/60

ANL

Heat Pump

or Chiller

220/3/60

460/3/60

Cooling 2.5 / 3 / 4 Tons Heating 37,670 – 57,597 Btu/h

Cooling 6.5 – 8 Tons

Heating 94,755 – 111,850 Btu/h

Reversible air to water heat pump for outdoor installation. Suitable for air conditioning and heating as well as the production of domestic hot water for small and medium applications. Provides water as warm as 140°F as cold as 17.6°F and operates down to -4°F. Ideal unit for residential fan coils, radiant heating, and cooling, as well as process heating and cooling. Integrated smart controller.

Reversible air to water heat pump or chiller for outdoor installation. Suitable for air conditioning, heating, and the production of hot water for small and medium applications.

8

Air to water heat pump for indoor installation. Suitable for air conditioning, heating and the production of hot water for medium sized applications in residential and commercial buildings. High static fans adjustable from 0.2 to 1.4 inch of static.

Reversible air to water heat pump for air conditioning systems with cold water production for cooling rooms and high temperature hot water for heating and/or domestic hot water services. Outdoor installation. Provides water up to 149°F with high COPs and operates to –4°F. High static fans available above model 500 for ducted installation.

NLC

Heat Pump

or Chiller

208/3/60

230/3/60

460/3/60

575/3/60

NRK

Heat Pump

460/3/60

Cooling 15 – 87 Tons Heating 164,000 – 974,000 Btu/h

Cooling 9 – 40 Tons

Heating 116,880 – 593,280 Btu/h

9

Chiller Air to water chiller for outdoor installation. Suitable for air conditioning with heat recovery options. Extremely quiet operation as compressors are mounted in an insulated compressor enclosure. Available with built in buffer tank, pump, expansion tank, etc. High static fans available for ducted installation. Free Cooling Chiller Air to water free cooling chiller for outdoor installation. Suitable for air conditioning year round operation. Extremely quiet as all compressors are mounted in an insulated compressor enclosure. Uses hybrid free cooling so that the efficiency is much higher than chiller-dry cooler or other manufactures free cooling chillers. Available with built in buffer tank, pump, expansion tank, etc. High static fans available for ducted installation. Heat Pump Air to water heat pump for outdoor installation. Suitable for the production of chilled or hot water for commercial or industrial buildings. Extremely quiet as all compressors are mounted in an insulated compressor enclosure. Smart defrost eliminates issues in winter and provides higher COPs. Available with built in buffer tank, pump, expansion tank, etc. High static fans available for ducted installation.

Applicable for all units above:

208/3/60

220/3/60

460/3/60

575/3/60




Heating 630,000 – 2,070,000 Btu/h

NRB

800-3000

Chiller

NRB FC

800-3000

Freecooling

Chiller

NRB HP

800-2400

Heat Pump

Only available for J inverter and sizes 800-1200

(inverter not available for free cooling version)

10

Air to water heat pump for outdoor installation. Suitable for the production of chilled or hot water for commercial or industrial buildings. Extremely quiet as all compressors are mounted in an insulated compressor enclosure. Smart defrost eliminates issues in winter and provides higher COPs. Available with built in buffer tank, pump, expansion tank etc. Heat pump can have partial heat recovery. Chillers can have partial heat recovery or total heat recovery. High static fans are available for 30 tons and above for ducted installation.

NRL

280-750

Heat Pump

or Chiller

208/3/60

230/3/60

460/3/60

575/3/60

NRL

3300-3600

Heat Pump

or Chiller

208/3/60

230/3/60

460/3/60

575/3/60


Heating 165,967 – 600,571 Btu/h

Cooling 241 – 261 Tons Heating 3,055,095 – 3,401,018 Btu/h

11

NRL FC

280-750

Integrated

Freecooling

Chiller

208/3/60

230/3/60

460/3/60

575/3/60

NRL FC

3600

Integrated

Freecooling

Chiller

208/3/60

230/3/60

460/3/60

575/3/60


Cooling 236 Tons

Air to water chiller with free cooling for outdoor installation. Suitable for year round air conditioning for medium sized applications in residential and commercial buildings. Air to water free cooling chiller for outdoor installation. Super quiet as all compressors are mounted in an insulated compressor enclosure. Uses hybrid free cooling so that the efficiency is much higher than chiller-dry coolers or competitor’s free cooling chillers. Available with built in buffer tank, pump, expansion tank etc. Partial heat recovery available.

12

Air to water chiller for outdoor installation. Suitable for summer air conditioning and the production of hot water for medium and large sized applications in residential and commercial buildings. AHRI rated and meets the AHRI rating even with the free cooling option. Quietest and most efficient modular chiller available with a very small footprint.

Available with optional desuperheater for 40% heat recovery. Up to 9 modules may be controlled by one Multichiller also chiller modules and free cooling modules may be used together when less cooling is required in the winter. High static fans are available for ducted installation.

The NYBi modular chiller with inverter scroll compressors shows an improvement of 34% on the IPLV compared to the standard NYB! With the same footprint as the standard NYB, allows combining one or more units with inverter compressors (NYBi) with units with on/off compressors (NYB).

Cooling 29 Tons (per module)

NYB

Chiller or

Freecooling

Chiller

208/3/60

230/3/60

460/3/60

575/3/60

NYBi

Chiller or

Freecooling

Chiller

460/3/60

13

Air cooled chiller designed to meet air conditioning needs in residential, commercial, or industrial applications. Outdoor units with oil free centrifugal compressor, axial fans, micro-channel coils, and shell and tube heat exchangers. High efficiency also at partial loads with low peak current (only 6 amps!). Further, there is an evaporator with low refrigerant charge and available with also R513A (XP10) refrigerant gas.

Cooling 90 – 348 Tons Preliminary

Cooling 68 – 316 Tons Preliminary

TBA

Oil Free

Centrifugal

Chiller

460/3/60

TBG

Oil Free

Centrifugal

Chiller

460/3/60

Air cooled chiller designed to meet air conditioning needs in residential, commercial, or industrial applications. Outdoor units with oil free centrifugal compressor, axial fans, micro-channel coils, and shell and tube heat exchangers. High efficiency also at partial loads with low peak current (only 6 amps!). Further, there is an evaporator with low refrigerant charge. HFO R1234ze refrigerant gas.

15

Revolutionary, ecological, and efficient, call it Trimultaneous. Chilled water, medium temperature hot water, and high temperature hot water as hot as 176°F. Highest efficiency available today with energy savings of up to 36%. Simple design, simple installation, maximum efficiency with renewable energy, and wide operating limits. Available in 3 sizes.

Preliminary: Cooling 47, 74, & 140 Tons Heating 600,000 – 1,700,000 Btu/h

CPS

(Capsule)

Simultaneous

Heating and

Cooling

460/3/60

16

Four pipe air to water simultaneous heating and cooling unit for outdoor installation. Automatically goes into heat recovery when in simultaneous mode. Used in all types of buildings that have a simultaneous load. Any amount of heating or any amount of cooling whenever required. Whenever there is a simultaneous load the smaller load is free which provides COPs of as high as 9. This unit is the most efficient available on the market. High static fans are available for units above 30 tons for ducted installation.


Cooling 52 – 120 Tons Heating 738,278 – 1,689,276 Btu/h


Heating 1,856,738 – 3,378,552 Btu/h

NRP

280-750

Simultaneous

Heating and

Cooling

208/3/60

230/3/60

460/3/60

575/3/60

NRP

800-1800

Simultaneous

Heating and

Cooling

208/3/60

230/3/60

460/3/60

575/3/60

NRP

2000-3600

Simultaneous

Heating and

Cooling

208/3/60

230/3/60

460/3/60

575/3/60

18

Six pipe water to water simultaneous heating and cooling unit for indoor installation. Suitable for simultaneous but independent production of hot and cold water. Automatically goes into heat recovery when simultaneous is available. Used in all types of buildings that have a simultaneous load. Any amount of heating or any amount of cooling whenever required. When there is a simultaneous load the smaller load is free which provides COPs of as high as 9. This unit is the most efficient available on the market.

Reversible water to water heat pump or chiller for indoor installation. Suitable for medium sized services in residential and commercial buildings. Optional 100% heat recovery or desuperheater providing 40% recovery.



NXP

Simultaneous

Heating and

Cooling

208/3/60

230/3/60

460/3/60

575/3/60

NXW

Heat Pump or

Chiller

208/3/60

230/3/60

460/3/60

575/3/60

19

Water to water heat pump for indoor installation. Suitable for air conditioning and heating for small and medium applications in residential and commercial buildings.


WRL / H

Heat Pump or

Chiller

208/3/60

230/3/60

460/3/60

575/3/60

WWM

Chiller

208/3/60

230/3/60

460/3/60

575/3/60

Cooling 31 Tons (per module)

Modular water to water chiller for indoor installation. Suitable for air conditioning of medium and large applications in residential and commercial buildings. The modules can be linked together side by side, back to back, and stacked to reach a capacity of 960 tons. No clearance is required on the top, sides, or back. The unit(s) may be removed for maintenance without shutting the system down. Max two levels of stacking. You may use either a heating or a cooling set point.

20

WRK is a reversible water to water heat pump for indoor installation designed to produce high temperature water up to 154°F. It is a heat pump on the refrigerant side and is considered to be the replacement of a boiler. Cooling, heating, and the production of high temperature water also for the production of Domestic Hot Water (DHW) are possibilities. The unit is optimized for heating in centralized systems and is independent from the gas network. There are 10 sizes available, double circuit.

WRK

Reversible Water

to Water Heat

Pump

460/3/60

Cooling 125,000 – 538,000 Btu/h Heating 157,000 – 674,000 Btu/h

21

The WWB, which operates in heating-only mode, is used to increase the outlet water temperature produced by a conventional heat pump, to a temperature up to 176°F to allow its use in all applications that demand high water temperatures. The WWB series is available in eight different sizes.

WWB

High Temperature

Heat Pump

460/3/60

Heating 220,000 – 852,000 Btu/h

23

BSM is a dual-circuit or triple-circuit chiller charged with R134a gas. It has axial fans to ensure the quietest possible machine operation, twin-screw compressors, a shell and tube exchanger and “V block” microchannel coils. The unit with several refrigerant circuits is designed to provide the maximum yield when fully charged but also guaranteeing excellent efficiency even with partial charging and ensuring continuity if one circuit or more stops operating. The machine cools water to supply the distribution system that is usually connected to fan coil type terminals. In addition, BSM can also produce domestic hot water if it is fitted with a desuperheater or total recovery system, so it is ideal for residential, commercial, or industrial applications.

BSM

Multicompressor

Screw Chiller

460/3/60


25

Water to water screw chiller suitable for indoor installation. Optimized for low condenser water temperature. Electronic expansion valve standard. Maximum condenser leaving water temperature of 122°F. Optional 100% heat recovery or

desuperheater providing 40% heat recovery. Available in 460 or 575 volts.

BWF

Multicompressor

Screw Chiller

230/3/60

460/3/60

575/3/60

HWF

Multicompressor

Screw Chiller

460/3/60

575/3/60


Water to water screw chiller suitable for indoor installation. Optimized for high condenser water temperature. Electronic expansion valve standard. Maximum condenser leaving water temperature of 140°F. Optional 100% heat recovery or desuperheater providing 40% heat recovery. Available in 460 or 575 volts.


27

Heat recovery unit with a refrigeration circuit. The cross flow heat exchanger is aluminum with excellent winter efficiency. The heat pump refrigeration circuit supplies fresh air at neutral conditions and covers part of the internal loads. The unit is ideal for fresh air renovation in buildings with DX systems such as stores, restaurants, offices, etc.

URX CF

Heat Recovery

URX 07 & 10

208/1/60

230/1/60

URX 12, 21, & 33

208/1/60

230/1/60

460/1/60

575/1/60 Cooling 1.6 – 6 Tons

Heating 30,000 – 105,000 Btu/h

Air Flow 441 – 1,942 CFM

28

EHT Active Chilled Beams are hybrid induction terminals combining temperature control, cooling, heating, and air distribution in one single device. A system of this type is able to limit operating costs thanks to its high energy efficiency. The active chilled beams move approximately 30% less air compared to a similar all-air system, which translates into reduced ventilation costs and increased levels of comfort.

EHT

Active

Chilled Beam

Air Flow 10 – 557 CFM

30

The FCL cassette type fan coil is a terminal unit for the conditioning of air in a room. The FCL concentrates high technological and functional features that make it the ideal means for air conditioning all environments. The supply of conditioned air is distributed throughout the room. The unit generates heat if included in a heating system with a boiler or heat pump but may also be used in the summer as an air conditioner if the heating system has a water chiller. The unit is mounted in a suspended ceiling with the possibility of sending conditioned air to adjacent rooms and introducing external air independently from unit ventilation. The basic FCL unit is available in two versions, for two pipe and four pipe systems.

The FCW high wall unit is ideal for summer air conditioning and winter heating. Fed with cooled water coming from a chiller, they make the air of the room fresh, dry, and clean in a short period of time and with great energy efficiency. The units are fed with hot water coming from a heat pump or from a common boiler and supply dry heating during the winter season. Optional: the ability to control an independent heating and cooling valve, two or four pipe.

Cooling 1.70 – 3.12 Tons

Heating 24,226 – 44,358 Btu/h

4 Sizes

Cooling 7,100 – 8,000 Btu/h

Heating 8,400 – 25,000 Btu/h

FCL

Fan Coil

Cassette

FCW

Fan Coil

High Wall

31

FCZ P units are a universal ducted fan coil that consists of a fan unit, a heat exchange coil, and a filter. They are ideal for summer air conditioning and winter heating as a 2 pipe system. Fed with chilled water, they make the air of the room cool, dry, and clean in a very short time and with great energy efficiency. Fed with heated water they provide comfortable heating. Very well designed, quiet, and only has a depth of 8.5 inches. The cooling coil is available with 3 or 4 rows and you may add an optional heating coil making it a 4 pipe system. Units may be mounted vertically or horizontally.

FCZ US USF units are a universal cabinet fan coil that consists of a fan unit, a heat exchange coil, and a filter. They are ideal for summer air conditioning and winter heating as a 2 pipe system. Fed with chilled water they make the air of the room cool, dry, and clean in a very short time and with great energy efficiency. Fed with heated water they provide comfortable heating. Very well designed, quiet, and only has a depth of 8.5 inches. The cooling coil is available with 3 or 4 rows and you may add an optional heating coil making it a 4 pipe system. Units may be mounted vertically or horizontally.


Heating 4,060 – 28,866 Btu/h

Cooling 0.28– 2.20 Tons

Heating 4,060 – 28,866 Btu/h

FCZ P

Fan Coil

Ducted

FCZ

US USF

Fan Coil

Cabinet

32

FCZ I EUP units are ducted fan coils that are fan coils that have continuous 0-100% variation of air flow rate making them extremely quiet. They have inverter technology with brushless DC electric motors with extremely high efficiency levels resulting in 50% energy reduction versus standard 3 speed fan motors. They are equipped with 220/110 dual voltage motors. Unit may have electrical and water connections on the same side. Further, the cooling coil is available with 3 or 4 rows and you may add an optional heating coil to allow for a 4 pipe system. Units may be mounted vertically or horizontally.

FCZ I EU EUF units are universal cabinet fan coils that have continuous 0-100% variation of air flow rate. Thanks to the inverter technology combined with the latest brushless DC electric motor and the extremely high energy efficiency levels, the FCZ I EU EUF fan coils can modulate the airflow rate continuously from 0-100%. This means the capacity is adjusted moment by moment to the specific needs of the air conditioned room. This results in 50% energy savings during winter and summer air conditioning ventilation, compared with the traditional on-off ranges. 220/110 dual voltage motors. The cooling coil is available with 3 or 4 rows and you may add an optional heating coil allowing for a 4 pipe system. Units may be mounted vertically or horizontally.


Heating 6,278 – 21,500 Btu/h


Heating 6,278 – 21,500 Btu/h

FCZ I EUP

Fan Coil

Ducted ECM

FCZ I

EU EUF

Fan Coil

Cabinet ECM

33

MZC is a plenum with motorized dampers for zone and air control. It adjusts the flow rate of the air along with the damper to create a comfortable environment. The MZC controls the airflow by adjusting the fan speed as dampers open and close to ensure that each zone gets the exact amount of air required. This automatic adjustment of the motor speed allows for no bypass damper and guarantees comfort and extremely quiet operation.

The VED fan coil is a ducted fan coil for both winter and summer operation. The units are designed to fit any ducted system. They can be integrated into the VMF system which allows the control of a single fan coil with accessories and the management of the VED introduced in complex fan coil networks.

Ventilcassaforma has been designed to suit modern interior architecture. It is a galvanized template that makes it possible to house fan coils in the wall. The template will make masonry work easier during the construction of a space where the fan coil will be installed. When the work is finished, the fan coil will be completely hidden from view. Ventilcassaforma is available for ducted fan coils in two pipe systems or four pipe systems.


Heating 32,000 – 74,500 Btu/h

MZC

Multizone

Zone Damper

VED /

VEDi

Fan Coil

Ducted

Ventilcassaforma

Fan Coil

Recessed in Wall

35

How It Works As the warm air rises to the ceiling, natural convection causes the air to flow down over the cooling strip while dehumidifying the air. This natural cooling circuit allows for ultimate comfort with no noise or drafts while maintaining a constant and comfortable humidity level between 50% and 60%. The cooling strip may also provide heating. In northern climates a separate or backup heating system may be required due to extremely cold ambient conditions.

Installation The cooling strip is simple to install. It is ideal for any type of environment and does not require a separate dehumidification or control system as it has a condensate collection system. The system is installed below the ceiling and painted to disappear or placed above the false ceiling where it is not visible.

Advantages By cooling all the objects in the space it provides unsurpassed comfort with extreme energy savings and no noise whatsoever. Simple, quick, and cost effective installation. There is no maintenance required in the space and no expensive controls or refrigeration skills required. Individual temperature zones provide superior comfort and energy savings while allowing for simple modifications as building uses change.

• Unsurpassed comfort with perfect temperatures and humidity

• No refrigeration in the space • No drafts in the space • No noise in the space • Simple installation

• No maintenance

Cooling Strip

Radiant Cooling

Aermec

Distributed by Master Distributor

Mits Airconditioning Inc. in North America

1608 Bonhill Road

Mississauga | Ontario | L5T 1C7

Canada: 1-800-567-2221

US: 1-888-567-2227

[email protected]

aermec.us

legend 3 - aermec.us

Documents