let’s get started live view playback - alc wireless security

1
Front cover BACK cover FO LD FO LD FO LD Wireless Made Simple. Infrared LED Thumb screw Camera Bracket T-Bolt Indoor/Outdoor camera with multi-position bracket AC power adapter microUSB / RJ45 cable (for optional manual connection) Screw/Anchor Kit Quick Start Guide IN THE BOX Phillips head screwdriver or drill may be required for installation Let’s Get Started LIVE VIEWING DEVICE SETUP For detailed installation and setup, please refer to the Model AWF61 complete User’s Guide available on our website: www.ALCWireless.com/support SCAN TO VIEW COMPLETE USER’S GUIDE ALCWireless.com Wireless Made Simple. Quick Simple Set Up SNAP SHOT LIVE VIEW 1 Tap preview PICTURE Tools Antenna Power Indicator Signal Indicator microSD Card Slot* microUSB port Microphone Tip: Plan the location of your cameras for optimal viewing and proximity to AC Power outlets, (1) power extension cable is included. Indoor/Outdoor Camera Multi-position Camera Bracket Passive Infrared Sensor Light Sensor NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete, brick and metal structures. This will reduce the transmission range. microSD card (not included). It is required for recording videos. Tap to turn volume ON/OFF in the in Live View mode. Tap to RETURN to the main page. LIVE VIEW RECORDING on microSD CARD* Tap for SNAPSHOT of live images in Live View. Images automatically save to smartphone’s camera roll or gallery. Tap to RECORD. One-minute recordings save to microSD card slot on the rear of camera, see diagram page for location (microSD card not included) as well as your cloud setting (if activated). NOTE: Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary. For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support 1 2 Manually RECORD video from Live View by tapping Record icon. Recording will stop after 1 minute. Lift cover and insert a microSD card into the rear of camera. A Class 10 microSD card is required. This camera supports up to 128GB microSD card. ADVANCED FEATURES SETTINGS microSD Card Slot* *microSD card (not included). It is required for recording videos. Power Cable 1080p Indoor/ Outdoor Wi-Fi Camera Remote Monitoring Anytime from Anywhere QUICK START GUIDE Model AWF61 REMOTE VIEWING Power extension cable Antenna Model AWF61 SightHD 1 2 From your smart device, DOWNLOAD and INSTALL the free ALC SightHD App. Plug camera into an electrical outlet (allow the camera up to 90 seconds to boot up). 3 On your device, open the Settings App. Tap Wi-Fi and under Choose A Network, select the HD-XXXXXX Network (X represents the numbers located on the DID barcode sticker on the back of your camera). FREE APP DOWNLOAD 4 If asked for a password, enter, “12345678”. Tap Join/Connect. 5 Now Launch the ALC SightHD App and the Setup Wizard will appear. 6 Tap to start the Wizard and select WiFi Cameras. 7 iOS Only: Once the screen indicates the camera is connected, tap Live View. iOS Only: Once the camera is found, the screen will show a Live View briefly before moving to a setup screen. 8 9 At the next screen enter a new password/security code and remember it or write it down. Tap Wi-Fi Setting or OK. 10 Select your home network from the menu, and then enter your home network’s Wireless Password. Tap OK. 12 The system will reboot the camera. The reboot will be complete when the App finishes counting down from 90. Tap still image for live video. 11 Android Only: Tap Live View. NOTE: Screen shots and icons may vary due to continuous updates to App and software development. Camera 2 (Live Video) 1 Select the Start and Stop date and time on the Select Event Filter and tap OK. 2 3 Tap the FILE that you want to playback from the list. PLAYBACK Tap EDIT SETTING icon and then EVENT LIST icon. • Sensitivity Setting (Motion Recording) • Email Setting • SDCard Setting On the Home Page (not Live View) Tap EDIT SETTING at the bottom of the screen, then tap SETTINGS icon and then tap ADVANCE (the default password is 123456) to see the Advanced Feature options: • Recording Setting • Time Zone Setting (ensure your time is correct) • Video Quality Setting If setup did not work, reset the camera by inserting a paper clip or similar object into the Reset hole for 10 seconds and the system will start the reset process. The system will restore to factory default settings and you may start the Wi-Fi setup. Remove the partially installed setup by tapping EDIT SETTING on the bottom of the home screen, then tap the Delete icon, then tap Yes. Now you can repeat the installation. FACTORY DEFAULT/RESET Surface Mount CAMERA MOUNTING NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds. Recommendations for best system performance: iOS 6.0 or above. Android: Android smartphone or tablet (version 2.3x or above). • Storage: Class 10 microSD memory card (up to 128 GB). • Bandwidth: 512Kbps or above upload/download speed suggested. CAMERA INSTALLATION + SETUP 1 2 4 3 Secure the multi-position camera bracket to a stable surface, ceiling or wall. Loosen the T-Bolt on the camera bracket and adjust viewing angle using the Thumb Screw to rotate position. Align hole on bottom of camera with T-Bolt to install camera. Screw antenna into rear of camera. Plug into electrical outlet when ready to install App (Step 2 in REMOTE VIEWING section). TM CLOUD: When an SD card is inserted and the Cloud option is activated (in Advanced Settings), recorded videos will automatically be transferred onto the cloud, i.e. Google Drive.

Upload: others

Post on 14-Nov-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Let’s Get Started LIVE VIEW PLAYBACK - ALC Wireless Security

Front coverBACK cover FO LD

FO L

D

FO LD

Wireless Made Simple.

InfraredLED

Thumb screw

Camera Bracket T-Bolt

Indoor/Outdoor camera with multi-position bracket

AC power adapter

microUSB / RJ45 cable(for optional manual connection)

Screw/Anchor Kit

Quick Start Guide

IN THE BOX

Phillips head screwdriver or drill may be required for installation

Let’s Get Started LIVE VIEWING

DEVICE SETUP

For detailed installation and setup, please refer to the Model AWF61 complete User’s Guide available on our website: www.ALCWireless.com/support

SCAN TO VIEW

COMPLETEUSER’S GUIDE

ALCWireless.com

WirelessMade Simple.

QuickSimpleSet Up

SNAP SHOT

LIVE VIEW

1 Tap preview PICTURE

Tools

Antenna

Power Indicator

Signal Indicator

microSD Card Slot*

microUSB port

Microphone

Tip: Plan the location of your cameras for optimal viewing and proximity to AC Power outlets, (1) power extension cable is included.

Indoor/Outdoor Camera

Multi-positionCamera Bracket

PassiveInfrared Sensor

Light Sensor

NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete, brick and metal structures. This will reduce the transmission range.

microSD card (not included). It is required for recording videos.

Tap to turn volume ON/OFF in the in Live View mode.

Tap to RETURN to the main page.

LIVE VIEW RECORDING on microSD CARD*

Tap for SNAPSHOT of live images in Live View. Images automatically save to smartphone’s camera roll or gallery.

Tap to RECORD. One-minute recordings save to microSD card slot on the rear of camera, see diagram page for location (microSD card not included) as well as your cloud setting (if activated).

NOTE: Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary. For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support

1

2 Manually RECORD video from Live View by tapping Record icon. Recording will stop after 1 minute.

Lift cover and insert a microSD card into the rear of camera. A Class 10 microSD card is required. This camera supports up to 128GB microSD card.

ADVANCED FEATURES SETTINGS

microSD Card Slot*

*microSD card (not included). It is required for recording videos.

Power Cable

1080p Indoor/Outdoor Wi-Fi

Camera

Rem

ote

Mon

itori

ng A

nytim

e fr

om A

nyw

here

QUICK START GUIDE

Model AWF61

REMOTE VIEWING

Power extension cable

Antenna

Model AWF61

SightHD1

2

From your smart device, DOWNLOAD and INSTALL the free ALC SightHD App.

Plug camera into an electrical outlet (allow the camera up to 90 seconds to boot up).

3

On your device, open the Settings App. Tap Wi-Fi and under Choose A Network, select the HD-XXXXXX Network (X represents the numbers located on the DID barcode sticker on the back of your camera).

FREE APP DOWNLOAD

4 If asked for a password, enter, “12345678”. Tap Join/Connect.

5 Now Launch the ALC SightHD App and the Setup Wizard will appear.

6 Tap to start the Wizard and select WiFi Cameras.

7 iOS Only: Once the screen indicates the camera is connected, tap Live View.

iOS Only: Once the camera is found, the screen will show a Live View briefly before moving to a setup screen. 8

9At the next screen enter a new password/security code and remember it or write it down. Tap Wi-Fi Setting or OK.

10Select your home network from the menu, and then enter your home network’s Wireless Password. Tap OK.

12The system will reboot the camera. The reboot will be complete when the App finishes counting down from 90. Tap still image for live video.

11 Android Only: Tap Live View.

NOTE: Screen shots and icons may vary due to continuous updates to App and software development.

Camera 2 (Live Video)

1

Select the Start and Stop date and time on the Select Event Filter and tap OK.2

3 Tap the FILE that you want to playback from the list.

PLAYBACK

Tap EDIT SETTING icon and then EVENT LIST icon.

• Sensitivity Setting(Motion Recording)

• Email Setting

• SDCard Setting

On the Home Page (not Live View) Tap EDIT SETTING at the bottom of the screen, then tap SETTINGS icon and then tap ADVANCE (the default password is 123456) to see theAdvanced Feature options:

• Recording Setting

• Time Zone Setting (ensure your time is correct)

• Video Quality Setting

If setup did not work, reset the camera by inserting a paper clip or similar object into the Reset hole for 10 seconds and the system will start the reset process. The system will restore to factory default settings and you may start the Wi-Fi setup. Remove the partially installed setup by tapping EDIT SETTING on the bottom of the home screen, then tap the Delete icon, then tap Yes. Now you can repeat the installation.

FACTORY DEFAULT/RESET

Surface Mount

CAMERA MOUNTING

NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.

Recommendations for best system performance:

• iOS 6.0 or above.

• Android: Android smartphone or tablet (version 2.3x or above).

•  Storage: Class 10 microSD memory card (up to 128 GB).

•  Bandwidth: 512Kbps or above upload/download speed suggested.

CAMERA INSTALLATION + SETUP

1 2

43

Secure the multi-position camera bracket to a stable surface, ceiling or wall.

Loosen the T-Bolt on the camera bracket and adjust viewing angle using the Thumb Screw to rotate position.

Align hole on bottom of camera with T-Bolt to install camera. Screw antenna into rear of camera.

Plug into electrical outlet when ready to install App (Step 2 in REMOTE VIEWING section).

TM

CLOUD: When an SD card is inserted and the Cloud option is activated (in Advanced Settings), recorded videos will automatically be transferred onto the cloud, i.e. Google Drive.