light safety -_day_9[1]
TRANSCRIPT
SAFETY INSTRUCTIONS
FOR HANDLING LIGHTING
Besides the camera, lights are the next most important equipment on a film set. But
because of their size and power (wattage), they can also be extremely dangerous if not
handled properly.
USE GLOVES AT ALL TIMES
Because of their power, all lights generate a great amount of heat. It is not humanly
possible to hold on to a light after it has been switched on for some time. It will burn the
skin. As such, use gloves when handling lights at all times.
Also, do not dismantle a light immediately after it has been switched off. Leave it aside
to cool off for some time.
STABILIZE THE LIGHT
This is to prevent it from toppling over, especially if the light is raised up high.
Stabilize the base of the light with a sandbag. If you run out of sandbags, you can also
improvise with any weighted object such as a schoolbag or plastic bag, so long as it does
not contain water.
DO NOT OVERLOAD THE STAND
There are different types of stands for different sizes of lights. Do not place a big light on
a stand meant for a small light.
GAFFER TAPE ALL CABLES
Accidents commonly occur when people trip over cables on the floor and topple
equipment over. Make sure all cables are pushed to the corners of the room before
securing them firmly with gaffer tape.
DO NOT OVERLOAD POWERPOINT / OHM’S LAW
Need Wayne’s input.