linksys configuration for working with novataxe. ver 4.3 settings.pdf · connect the linksys gw...

“La Connectivité de Qualité en Toute Simplicité”

of 9

Linksys configuration

for working with Novataxe. Ver 4.3.1

Table of Contents

Connection ................................................................................................................................2 Connect Network Cable ........................................................................................................2

Detecting the Linksys GW IP address ......................................................................................2 Default...................................................................................................................................2 Using Telephone connected ..................................................................................................2

Setting the IP.............................................................................................................................2 Using Telephone connected ..................................................................................................2 Using Web browser...............................................................................................................3 Notes: ....................................................................................................................................3

Configuration of the GW ..........................................................................................................3 Connect using web browser ..................................................................................................3 SYSLOG ...............................................................................................................................4 Access with password ...........................................................................................................5 Avoid end of dialling timeout ...............................................................................................6 Disable Hook Flash...............................................................................................................7 RTP packet size.....................................................................................................................8


of 9

Connection

Connect Network Cable Connect the network cable to the BLUE RJ45 interface on the back of PAP2 or Linksys 2XXX, marked “Internet” Connect the network cable to the YELLOW RJ45 interface on the back of Linksys 8000, marked “Ethernet”

Detecting the Linksys GW IP address

Default 1. Default IP address 192.168.0.1 (on some models 192.168.1.1)

Using Telephone connected Déterminez l´adresse IP de votre Linksys en appuyant sur quatre touches astérix (*) sur le téléphone analogique associé au Linksys et appuyez sur l´option 110 puis sur la touche dièse (#).

****110#

Setting the IP

Using Telephone connected Connect a telephone to one of the FXS ports. Lift the handset and dial:

1. Check internet connection type: ****100# (DHCP or Static or PPOE) 2. Enable DHCP: Dial **** then 101# then 0# then 1 to save. 3. Or Enable static IP: Dial **** then 101# then 1# then 1 to save. 4. Set static IP: ****111# (use * for the point, # at the end) 5. Check Network mask: ****120# 6. Set Network mask: ****121# (use * for the point, # at the end) 7. Check GW: ****130# 8. Set GW: ****131# (use * for the point, # at the end) 9. Check IP Internet: ****110# 10. Check IP Ethernet (internal) : **** 210# 11. Check Web server port ****170# 12. Check Primary DNS server IP ****160# 13. Set Primary DNS server IP ****160# (use * for the point, # at the end) 14. Factory Defaults ****73738# then 1 to confirm 15. Reset user setting ****877778#


of 9

Using Web browser 1. Enable Web by using telephone connected to the one of the FXS ports and type ****7932# and then 1#

to enable and then 1 to save

2. Connect the Linksys GW using web browser using the IP address found or set on previous sections. 3. Choose “Admin” and “Advanced” modes. 4. Select tab “Router” 5. Select sub tab “WAN Setup”

Notes: 1. Do not use IP address 192.168.1.x or 192.168.0.x as the GW external address as it

might collide with the internal IP address of the GWs.

Configuration of the GW

Connect using web browser 1. Enable Web by using telephone connected to the one of the FXS ports and type ****7932# and then 1#

to enable and then 1 to save 2. Connect the Linksys GW using web browser using the IP address found or set on previous sections


of 9

3. Choose “Admin” and “Advanced” modes.

SYSLOG

1. Select tab “Voice” 2. Select sub tab “System” 3. Enter the IP of the PC with Novataxe on “Syslog Server” and “Debug Server” 4. Choose “Debug level” to 3. 5. Make sure that port 514 UDP on your PC is not blocked by internal firewall


of 9

Access with password If you choose to protect the access of the user by password:

1. Select tab “Voice” 2. Select sub tab “System” 3. Put the selected password on “User password” field.

4. On NovaTaxe on adding the GW Linksys put the “login” as “user” and the “Password” as selected (in the above example it is “user”)


of 9

Avoid end of dialling timeout Enter as Admin login and advances, choose voice and the line to set: on dial plan put the patterns to be recognized for end of dialling. For example in France: (*xx|3xxxS0|00|0[1-9]xxxxxxxxS0|89xxxxxxxS0|xxxxxxxxxxxx.) Where: *xx. - allow stared plus to or more digits (i.e. voicemail *123, turn off caller-id *69, etc) 00 - allow dialing 00 for international operator 3xxxS0- allow dialing (immediate) of 3xxx service numbers, for example SNCF, 3690 and etc. 0[1-9]xxxxxxxxS0 – Allow immediate dialling for local number. 89xxxxxxxS0 – for PIN codes starting with 89


of 9

Disable Hook Flash The hook flash MUST be disabled on al Linksys models, otherwise the call can be put in hold and/or the Novataxe can interpret it as call end while the call is continuing. To disable the Hook flash, logon to the Linksys as “Admin login” and choose “advanced” and go to “Voice” tab and “Regional” sub-tab. Reset “Hook Flash Timer Min:” and Hook Flash Timer Max:” to 0.


of 9

RTP packet size Certain operators support only RTP packet size of 20 (instead of 30 by default) Select the “SIP” tab to change.


of 9

linksys configuration for working with novataxe. ver 4.3 settings.pdf · connect the linksys gw...

Documents