liqui moly5603
TRANSCRIPT
-
7/24/2019 liqui moly5603
1/156
PRODUCTS & SERVICES
MOTOR OILSADDITIVESCAR CARE
-
7/24/2019 liqui moly5603
2/156
CONTENTS
Additives 4
Oil-Additives 6
Fuel additives for Petrol 9
Fuel additives for Diesel 11
Radiator Additives 14
Workshop Pro-Line 15
Lubricants 20
Engine Oils 4-stroke Car 22
Engine Oils for Gas-driven Vehicles 31Engine Oils Classic Vehicles 32
Engine Oils 4-stroke Motorbike Street 32
Engine Oils 4-stroke Motorbike Offroad 34
Engine Oils ATV/SxS 35
Engine Oils 4-stroke Boat 35
Engine Oils 4-stroke Truck 36
Engine Oils 4-stroke Tractor 38
Engine Oils 4-stroke Lawnmower 38
Engine Oils 2-stroke Universal 38
Engine Oils 2-stroke Tractor 39
Engine Oils 2-stroke Motorbike Street 39
Engine Oils 2-stroke Motorbike Offroad 40
Engine Oils Kart 40
Engine Oils 2-stroke Boat 40
Engine Oils 2-stroke Chain Saw 41
Gear Oils 41
Gear Oils Tractor 46
Gear Oils Motorbike 47
Gear Oils Boat 47
Hydraulic Oils 48
Brake Fluids 50
Compressor Oils 50
Workshop Equipment 51Greases 56
Pastes 59
Bonded Coatings/Dry Lubricants 61
Contact Lubricants 61
Car Care 62
Paint 64
Glass 67
Rims/Tires 68
Top 69
Interior 69
Plastic 71
Chrome 71
2
-
7/24/2019 liqui moly5603
3/1563
Rubber 71
Care 72
Engine 72
Winter products 73
Repair aids / Service Products 74
Rust Solvent/Multipurpose 76
Exhaust Assembly and Repair 79
Air-Conditioning System Cleaner 80
Cleaner 81Hand Care 82
Adhesives and Sealants 84
Windshield Repair 86
Laminated Glass Repair 87
Sealants 88
Industrial Adhesives 89
Plastics Repair 91
Accessories/Tools 92
Corrosion Protection 97
Underseal 97
Cavity Protection 98
Accessories/Tools 99
Commercial Vehicles 100
2-wheel/Quad/Kart/Bike 109
Boat 121
Products for Garden Equipment 124
First and Second Placements 127
Advertising material 130
Table of contents, numeric 134
Outdoor Advertising 155
-
7/24/2019 liqui moly5603
4/1564
Additives
Fuel additives can directlybe connected to the fuelsystem using JetClean Plusor JetClean Tronic andensure an intensivecleaning of the system.
Cooling additives are addedto the coolant and clean thesystem or seal the smallestleakage points.
Engine oil additives are directlyfilled into the oil filler openingof the engine and clean the systemor reduce friction and wearing.
Cleaneng
inesreduce
fuelconsumptionan
d
theemission
ofCO2
-
7/24/2019 liqui moly5603
5/156
ADDITIVES
5
Additives
Oil-Additives 6
Fuel additives for Petrol 9Fuel additives for Diesel 11
Radiator Additives 14
Workshop Pro-Line 15
Motor Oil Saver regeneratesseals and shaft seals, makesthem smooth again and reducesoil loss at the gear, at the rearaxle and on the engine.
Gear oil additiveskeep the wearing lowand reduce friction.
Gear oil additives are directlyfilled in the gearbox, reducethe wearing and facilitate thegear changes.
Fuel additives can directlybe filled in the tank andthereby clean the entirefuel and combustion system.
-
7/24/2019 liqui moly5603
6/1566
Cont. Packaging Part Unit No.
Area of use
OILADDITIVES
Cera TecCera Tec is a high-tech ceramic wear protection and can be mixed with allcommercially available oils. Cera Tec reduces friction and wear by usingchemically and thermally extremely high-resilient ceramic compounds.Prevents direct metal/metal contact, increasing the service life of theaggregate. The smooth-running effect reduces fuel consumption in petroland diesel engines.
Viscoplus for OilReduces oil consumption and improves compression through optimallyflexible sealing. Stabilizes the motor oil and provides ideal oil pressure.Reduces engine noise build-up and ensures outs tanding lubricating filmstability. Reduces wear.
MotorProtectFull synthetic motor oil additive. It significantly reduces wear. High-pressurewear protection additives create a very thin layer on the engine friction pointsthat is moldable and low-friction under wear conditions. Its effec tivenesslasts for at least 50,000 km . That produces these benefits: Significant wearreduction Extended engine service life Fuel and emissions reductionthrough smooth-run effect Optimal engine power, quiet running.
Oil AdditiveThe MoS2low-viscosity engine oil creates a heavy-duty lubricant film on allfrictioning and sliding metal surfaces. It reduces friction, guaranteeing theaggregates run more smoothly. That produces these benefits: Signific antfuel and oil saving, scientifically proven wear reduction, high reliability, anti-
friction properties.
Oil Sludge FlushThe perfect solution to clean the engine from inside. Washes off oil sludgeand other dirt and deposits. Increases the engines reliability and preventsincomplete lubrication. Lubrication holes, oil screens, piston r ing grooves
and ducts are gently cleaned, preventing engine damage.
Hydraulic Lifter AdditivePrevents hydro tappet noise. Lubrication holes and ducts in the oil circuit arecleaned. Secures optimal hydro tappet performance. Increases the reliabilityand travel comfort of the vehicle.
Motor Oil SaverRegenerates rubber and plastic engine seals such as shaft seals and valvestem seals and prevents oil stains under the vehicle. Counterac ts oil dilution.Reduces engine noise and oil consumption through piston rings and valveguides.
300 ml 6 372116
300 ml 6 718158
300 ml 6 1017 12
300 ml 20 250228
300 ml 20 280731
300 ml 12 267232
300 ml 20 836229
300 ml 12 837730
300 ml 20 895833
500 ml 6 1018 18
500 ml 6 186723
500 ml 6 2866 2
125 ml 6 1011 12
125 ml 20 180033
125 ml 20 835228
125 ml 12 837830
125 ml 12 834132
200 ml 6 1012 12
200 ml 12 717833
300 ml 20 250028
300 ml 20 280531
300 ml 20 259133
300 ml 12 218230
300 ml 12 835012
300 ml 20 836429
300 ml 12 834232
500 ml 4 1013 12
5 l 1 3710 205 l 1 3749
300 ml 6 520012
300 ml 6 100912
300 ml 20 277033
300 ml 12 834532
300 ml 20 835428
300 ml 20 836729
300 ml 12 838230
300 ml 20 833831
205 l 1 2581
300 ml 6 100512
300 ml 20 250128
300 ml 20 280631
300 ml 20 180233
300 ml 12 267132
300 ml 20 835929
300 ml 20 837530
Wear protection for engines,transmissions, pumps and com-pressors. Cera Tec is added to theoil and is self-mixing. Sufficientfor 5 l oil volume. With long-termeffect for 50,00 0 km. Not suitablefor use with wet clutches!
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-late filter (DPF). Tested safe withcatalytic converters and turbo-chargers. Can contents are suf-ficient for up to 5 l motor oil. Not
suitable for motorcycles with wetclutches.
The additive is added to the n ewoil AFTER an oil change. 500 mlsufficient for up to 5 l motor oil.Adding to low-friction full-syn-thetic low-viscosity oils reduceswear further by approx. 35 %.With long-term effectiveness for50,000 k m (comply with oil changeintervals from vehicle manufac-turer).
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-late filter (DPF). Tested safe with
catalytic converters and turbo-chargers. Our dosage recommen-dation: add from 3 5 % to motoroil. For motorcycles with wetclutches, add maximum 2 % of theoil filling volume.
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-
late filter (DPF). Tested safe withcatalytic converters and turbo-chargers. Add approx. 200 km be-fore an oil change. Can contentsare sufficient for up to 5 l motoroil. Not suitable for motorcycleswith wet clutches.
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-late filter (DPF). Tested safe withcatalytic converters and turbo-chargers. Can contents are suf-ficient for up to 6 l motor oil. Notsuitable for motorcycles with wetclutches.
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-late filter (DPF). Tested safe withcatalytic converters and turbo-chargers. Can contents are suf-ficient for up to 5 l motor oil.Sealing action after 600 800 kmmileage. Not suitable for motor-cycles with wet clutches.
Car
2D DK FIN N S 12D F NL 16D GB I E P NL F ARAB RUS 18D GB NL F E I 23GR P RO RUS UA ARAB 28D E P29GB ARAB F 30D H RO 31DK S FIN 32D PL BG 33GB GR I 58D GR PL TR CZ RO H BG
-
7/24/2019 liqui moly5603
7/156
ADDITIVES
7
Cont. Packaging Part Unit No.
Area of use
OILADDITIVES
Viscoplus Heavy Duty FormulaHigh-performance additive for stabilizing the viscosit y of motor oils. Keepsmotor oil viscosity stable and ensures constant oil pressure. It providessuperb protection against mechanical shear loss of the motor oil under eventhe harshest conditions. Prevents thinning of m otor oil caused by frequentcold starts. Oil consumption is reduced by means of improved sealing ofmovable engine parts.
Engine Flush PlusHighly effective cleaning fluid for clearing the engine interior of troubles omedeposits. Dissolves sludge and lacquer formers quickly and reliably. Alltypes of oil-soluble and oil-insoluble residues are brought into suspensionand removed during the next oil change. An engine which has been cleanedof deposits and contamination and which is then filled with fresh oil notcontaminated with old impurities can develop its full performance char ac-teristics. Wear in the engine is thus reduced and the ser vice life is extended.
MotorCleanThe perfect solution to clean the engine inside. Highly effec tive cleaningadditive loosens sludge and enamel-type dirt, sur rounds the solid particlesand liquid contaminations. They are drained off together with the old oilduring an oil change. Following such a prepared oil change, the new oil can
develop its full performance: The engine r egains its full power Runs withless wear The exhaust emission char acteristics are optimized Preventsincomplete lubrication.
GearProtectHigh-pressure wear protection additive from the l atest technology. Reducesfriction and wear. The transmission runs quieter, smoother and can be shifted more softly. With long-term effect of up to 100,000 km. Smooths tooth flanksand increases the stability of the components.
ATF AdditiveOptimally cares for rubber and plastic seals in steering gears and automatictransmissions. Leaks on transmissions and gears, caused by hardened andbrittle seals, are prevented and eliminated.Cleans holes and channels in thetransmission and refreshes the oil s performance. Reduces noise formationand improves the shifting in automatic transmissions. E xtends the life ofsteering gears and automatic transmissions.
Hydraulic-System-AdditiveProtects and maintains sealing materials such as O-rings in hydraulic sys-tems. Reduces the friction and prevents the stick slip effect. L owers the oiltemperature, slows down oil aging and provides optimal protection of com-ponents of the hydraulic system, e.g. pumps, against wear. Protects hydraulicsystems against corrosion, foam and sludge formation and deposits.The wear is minimized, the risk of repairs is reduced and operating cost slowered.
1 l 6 2105 1
1 l 6 2697 4
300 ml 20 265728
300 ml 20 837429
500 ml 6 1019 18
500 ml 6 188323
500 ml 6 2865 2
80 ml 6 100718
80 ml 6 2863 2
250 ml 6 5135 1
250 ml 12 833629
1 l 6 5116 1
Suitable for all gasoline anddiesel engines with and withoutdiesel particulate filter (DPF). Canbe mixed with all commercially-available motor oils. 1 l sufficientfor 10 to max. 20 l of motor oil.
For cleaning and flushing out theoil circuits of gasoline and dieselengines. 300 ml suff icient for upto 6 l of m otor oil. Not suitablefor use on motorbikes with wetclutches!
Suitable for all commercial motoroils in petrol and diesel engineswith and without diesel particu-late filter (DPF). Tested safe with
catalytic converters and turbo-chargers. Add to motor oil atoperating temperature beforechanging oil. Cleaning durationapprox. 10 minutes. Can contentsare sufficient for up to 5 l motoroil. Not suitable for motorcycleswith wet clutches.
For manual transmissions, powertake-off and differential gears.Contents sufficient for 2 l trans-mission oil. Not suitable for auto-matic transmissions and motor-cycles with wet clutches. Addany time and when changing thetransmission oil.
Add ATF Additive to the powersteering reser voir or add to thetransmission oil through the dip-stick. The contents of 250 ml aresufficient for up to 8 l oil volume.Suitable for steering gears andautomatic transmissions that arefilled with ATF II and ATF III oils.
For hydraulic systems in industry,in construction and commercialvehicles as well as for assembliesused for agriculture and forestry.Mix with the hydraulic oil. Forpreventive use, a dosage of 2 to4 %, 4 to 8 % when used to treatproblem cases. Not suitable forhydraulic systems that are filledwith rapidly biodegradable hy-draulic oils in accordance withHEPG, HETG or HEES as well ascentral hydraulic system oils orbrake fluid.
Car
1D GB I E P 2D DK FIN N S 4D PL H RO TR 18D GB NL F E I 23GR P RO RUS UA ARAB 28D E P29GB ARAB F
Automatic Transmission CleanerCleans and frees the automatic oil circuit from deposits and remnants.Secures ideal shifting and extends the life of the tr ansmission.
300 ml 6 2512 1Suitable for all automatic trans-missions! Can contents sufficientfor 6 9 l oil volume. LIQUI MOLYAutomatic Transmission Cleanercan be used by adding to thetransmission oil with the help ofa funnel through the dipstick orin all commercial automatictransmission cleaning appliances.
-
7/24/2019 liqui moly5603
8/1568
Cont. Packaging Part Unit No.
Area of use
OILADDITIVES
Gear-Oil AdditiveThe MoS2additive creates a heavy-duty lubr icant film on all frictioning andsliding metal surfaces. It reduces friction, wear and decreases temperaturepeaks. The result is a smoother run, softer shifting and a nearly wear-freerunning-in in gear wheels, friction couples and tribological pairings. Reliabilityand antifriction properties are significantly increased.
Gear-Oil Leak StopRegenerates rubber and plastic transmission seals such as shaft seals andprevents oil stains under the vehicle. Protects clutches from oil fouling andprevents incomplete lubrication and transmission damages that are causedby too low an oil level. Prevents polluting oil stains.
Power Stearing Fluid Leak StopThe additives contained provide optimum care for rubber and plastic sealsin the steering gear. Leaks in gears caused by hardened or br ittle sealsare prevented or remedied, holes and ducts in the gear s are cleaned andthe performance of the oil is revitalized. The nois e levels are reduced, theservice life is extended and the repair costs are lowered.
20 g 12 1040 20 g 12 265249
50 g 12 2510 19
50 ml 12 1042
35 ml 12 1099 8
For manual transmission, powertake-off and differential gears especially under high thermalloads. Contents are sufficient forup to 1 l transmission oil. Notsuitable for motorcycles with wetclutches.
For manual transmissions, powertake-off and differential gears.Contents are sufficient for up to1 l transmission oil. Not suitable
for motorcycles with wet clutches.
Suitable for steering gears thatare filled with ATF II, ATF III orcentral hydraulic system oils.Add to the compensating reser-voir of the steering system.35 ml is sufficient for 1 liter of oil.
Car
Motorbike Oil AdditiveEngine wear protection on molybdenum disulfide basis (MoS2). Scientificallyproven wear reduction up to 50 %. Extends the engine life. The engineruns smoother, the oil and fuel consumption are reduced. Increases enginequietness, fewer breakdowns. Cat tested.
Motorbike Engine FlushCleaning fluid for clearing the engine interior of troublesome deposits. Dis-
solves sludge and lacquer formers. A ll types of oil-soluble and oil-insolubleresidues are brought into suspension and removed during the next oilchange. An engine which has been cleaned of deposits and contaminationand which is then filled with fresh oil not contaminated with old impuritiescan develop its full performance characteristics.
125 ml 6 1580 1
250 ml 20 1657 1
For all 4-cycle and 2-cycle en-gines with separate and gasoil lu-brication. Can also be used in oil-immersed multi-plate clutches.Dosage recommendation: duringevery oil change and for 2-c ycleengines every time you fill-up.4-cycle engines: 30 ml per litermotor oil; 20 ml for oil-immersedclutches. 2-cycle engines withseparate lubrication: 20 ml perliter 2-cycle oil and with gasoillubrication. 10 ml per 10 l mixture.
Flushes out and cleans the oil
circuits of motorcycles with four-stroke gasoline engines. The fre-quency of use is dependent on thedegree of contamination of the oilcircuit and on the quality of the oilused.
Motorbike
1D GB I E P 8D GB 19D GB I E 28D E P 29GB ARAB F 31DK S FIN 33GB GR I 49PL
Oil Smoke StopOil Smoke Stop reduces the oil consumption of gasoline and diesel enginesvia the piston rings and valve guides. It prevents blue smoke and oil mistand acts against the loss in viscosit y in motor oils. Oil Smoke Stop increasesthe compression ratio and reduces engine noise. Prov ides extra protectionin engines with high levels of wear. Extends the ser vice life of catalytic con-verters.
300 ml 20 212228
300 ml 20 280831
300 ml 20 836029
300 ml 20 890133
For all gasoline and dieselengines. Compatible with allcommercially available motoroils. Not suitable for use inmotorcycles with wet clutches.
-
7/24/2019 liqui moly5603
9/156
ADDITIVES
9
Cont. Packaging Part Unit No.
Area of use
FUEL ADDITIVES FOR PETROL
Speed Tec PetrolThis highly modern fuel additive was specially developed to noticeably im-prove acceleration and throttle response under partial load. Provides mor edriving pleasure through optimized performance yield. The engine startsbetter and even runs more smoothly.
Injection CleanerRemoves deposits on injection valves, intake valves, spark plugs and in thecombustion chamber and prevents them from reforming . Eliminates startproblems and rough engine runnin g. Cares for all components in the petrolinjection system. Protects the entire fuel system from corrosion. Improvesthe throttle response and compression. Optimizes the emission test v aluesand performance of the engine. Clean engines need le ss fuel and reduceemissions.
Fuel System TreatmentMaintains and protects the entire fuel system from wear, deposits andcorrosion. Improves engine running and prevents performancedecrease.
Clean engines need less fuel and reduce emissions .
mtx Carburetor and Valve CleanerIncreases engine performance. Removes deposits in c arburetor, in valves,spark plugs and in the combustion chamber and prevents renewed formation.Saves fuel. Improves compression. Protects the entire fuel system fromcorrosion. Prevents carburetor icing. Clean engines need less fuel and re-duce emissions.
Valve CleanProvides ideal engine power. Removes deposits on v alves, in the combustionchamber and prevents renewed formation. Saves fuel. Optimizes the emissiontest values and performance of the engine. Improves compression. Cleanengines need less fuel and reduce emissions.
Catalytic-System CleanerSpecial active solvent with a high-tech additive combination for removingtypical contamination and deposits found in the intake and combustionsystem. The high cleaning effect ensures a clean catalytic converter andreduces the exhaust emissions. Dissolves and r emoves deposits and con-taminants such as oil, resins , adhesive residues , etc. of the intake andcombustion system. Increases the reliability of gasoline engines and the
catalytic system.
SPEED Petrol AdditiveIncreases engine performance. Removes deposits in carburetor, in valves,spark plugs and in the combustion chamber and prevents renewed formation.Saves fuel. Improves compression. Protects the entire fuel system fromcorrosion. Prevents carburetor icing. Clean engines need less fuel and re-duce emissions.
250 ml 6 3720 1
250 ml 6 2848 2
300 ml 6 5110 12
300 ml 20 252228
300 ml 20 282231
300 ml 20 180333
300 ml 20 197132
300 ml 20 191822
300 ml 20 836129
300 ml 12 837630
300 ml 20 187561
50 l 1 5113 195 l 1 4036
300 ml 6 510812
300 ml 20 836529
300 ml 6 510012
300 ml 20 212328
300 ml 20 250729
300 ml 20 281031
300 ml 20 181833
300 ml 20 190222
300 ml 12 833932
50 l 1 5102
150 ml 6 1014 12
150 ml 20 250328
150 ml 20 280931
150 ml 20 295233
150 ml 20 837329
300 ml 20 893133
1 l 6 5105
Suitable for all 2- and 4-cyclepetrol engines. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. Can contents aresufficient for up to 70 l fuel.Perfect for constant use for anykind of refueling.
Suitable for all petrol engines as a preventative measure or tosolve problems. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. 300 ml are sufficientfor up to 70 l fuel. Effect lasts upto 2,000 km.
Suitable for all petrol engines especially for new vehicles for
preventative use. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. Can contents aresufficient for up to 75 l fuel . Effectlasts up to 2,000 km.
Suitable for all petrol engines as a preventative measure or tosolve problems. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. 300 ml are sufficientfor up to 70 l fuel. Effect lasts upto 2,000 km. Can also be put di-rectly into the carburetor with theengine running.
Suitable for all petrol engines as a preventative measure or tosolve problems. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. Can contents aresufficient for up to 75 l fuel.
Removes contamination and de-posits in the intake and throttlevalve areas, combustion chamberand catalytic system which dis-rupt smooth engine running andrising exhaust emissions. Use
of the cleaner is recommendedduring every inspection in orderto prevent heavy deposits. It canalso be used as problem solver incase of high emissions.
Suitable for all petrol engines as a preventative measure or tosolve problems. Tested safe withcatalytic converters and turbo-chargers. For adding directly tothe fuel tank. One filling with the25 ml dispenser (integrated inthe cap) is sufficient for 10 l fuel.For permanent use every timeyou fill up.
Car
1D GB I E P 2D DK FIN N S 12D F NL 22D F I 28D E P 29GB ARAB F 30D H RO 31DK S FIN 32D PL BG33GB GR I 61D GB FA
-
7/24/2019 liqui moly5603
10/15610
Cont. Packaging Part Unit No.
Area of use
FUEL ADDITIVES FOR PETROL
Lead SubstituteLubricates and protects valve seat ring on vehicles that or iginally requiredleaded fuel. Reduces wear on the cylinder head, maintaining optimal com-pression. Prevents engine breakdown and increases reliability.
Octane PlusSelf-mixing combination of agents formulated according to state-of-the-artadditives and fuel technology. Universal use. Increases the res earch octanenumber (RON) of the fuel by 2 4 points, depending on the RON. The in-creased fuel performance prevents en gine damage caused by knocking andthe increased octane number leads to optimized engine performance andreduced fuel consumption.
Fuel ProtectAsh-free, self-mixing combination of active agents formulated according tothe latest additive, fuel and engine technologies and specially developed tofulfill the demands of todays engines, fuels and running conditions.
Valve Protection for Gas VehiclesProtects the valves in the engine and absorbs peak temperatures. The selectedcombination of additives ensures optimal lubrication as well as clean com-bustion. Expensive repairs and engine damage are thus avoided. Maintainsvehicle performance and prevents loss of compression . Valve Protection forGas Vehicles does not contain any organometallic compounds and has nonegative effects on catalytic converters.
250 ml 6 1010 12
250 ml 12 281931
250 ml 12 183833
50 l 1 2142
150 ml 20 835129
150 ml 20 281231
150 ml 12 295633
150 ml 20 835528
150 ml 12 834632
150 ml 20 252729
150 ml 20 188261
200 l 1 8858
300 ml 20 253029
300 ml 20 2811 31
300 ml 20 295533
300 ml 20 835628
1 l 6 4012 1
200 l 1 2303
For older petrol engines for whichthe manufacturer originally speci-fied leaded petrol. For preventativeuse. Tested safe with catalytic
converters and turbochargers.For adding directly to the fuel t ank.One filling with the 25 ml dispenseris sufficient for 25 l fuel. For per-manent use every time you fill up.
For increasing the octane numberof gasoline.
For all gasoline engines (carbure-tor and fuel-injection engines).For rectifying difficulties withstarting, irregular idling, poorthrottle response, performancelosses. Prevents the problem ofcorrosion in the gasoline systemand thus prevents operationalmalfunctions.
Specially developed for gas-powered vehicles (CNG/LPG) even with retrofit (bivalent) gassystems. Permanent use. Testedsafe with catalytic converters andturbochargers. For adding directlyin the dispenser of a requireddosing device. Suitable for all
standard dosing units. LIQUIMOLY recommends a dosage of6 to 8 drops per minute for vacuumcontrolled dosing devices.
Car
Motorbike 4T Bike-AdditiveIncreases engine perfor mance. Removes deposits in the fuel system, invalves, spark plugs and in the combustion chamber and pr events renewedformation. That also reduces fuel consumption. Protect s the entire fuelsystem from corrosion. Prevents carburetor icing. Cat tested.
Motorbike 2T Bike-Additive
Increases engine perfor mance. Removes deposits in the fuel system andon intake and exhaust ports and prevents n ew formation. Protects the entirefuel system from corr osion. Cat tested. Clean engines need less fuel andreduce emissions.
125 ml 6 158115
250 ml 6 1582 1
Add to fuel in all 4-cycle engines(carburetor and injection system).125 ml sufficient for 15 to 20 l fuel.Add every time you fill up.
For all 2-cycle engines with mixedor separate lubrication. Onefilling with the dispenser (25 ml)is sufficient for 5 l fuel or fu elmixture.
Motorbike
1D GB I E P 12D F NL 15D GB I 28D E P 29GB ARAB F 31DK S FIN 32D PL BG 33GB GR I 61D GB FA
Petrol StabiliserPreserves and protects the fuel from ageing and oxidation. Prevents corro-sion throughout the entire fuel system. Guarantees problem-free decom-missioning of old-timers, convertibles, motorcycles, motor scooters, quads,lawnmowers chain saws and other petrol-powered 2-cycle and 4-cycleengines. Increases reliability. With long-term effect.
250 ml 6 5107 12Suitable for all petrol engines especially for preventative use.Tested safe with catalytic convert-ers and turbochargers. Add to fueland re-add every time you fill up.One filling with the 25 ml dispens-er is sufficient for 5 l fuel. Alsosuitable for permanent use in en-gines that are rarely put to use.
Petrol Stabiliser CNG/LPGAshless additive combination with preserving and material protection proper-ties.Protects the fuel system against operational malfunctions which arisefrom age-related fuel deposits. With long-term effect.
250 ml 6 281731Suitable for all petrol engines Add to fuel for gas-driven vehiclesthat require gasoline to start.Tested safe with catalytic convert-ers. Add to fuel and re-add ever ytime you fill up. One filling withthe 25 ml dispenser is suff icientfor 20 l fuel. Al so suitable forpreservation before decommis-sioning gasoline engines.
-
7/24/2019 liqui moly5603
11/156
ADDITIVES
11
Cont. Packaging Part Unit No.
Area of use
FUEL ADDITIVES FOR PETROL
Speed Tec DieselThis highly modern fuel additive was specially developed to noticeably
improve acceleration under partial load. Provides more driving pleasurethrough optimized performance yield. The engine star ts better and evenruns more smoothly.
Bio Diesel AdditiveCleans the entire diesel injection system. Prevents jet needles from fusingand gumming. Improves the combustion of bio-diesel and reduces fuelconsumption. Protects the entire fuel system from corrosion and age relateddeposits. Clean engines need less fuel and reduce emis sions.
Common Rail AdditiveMaintains and protects the entire fuel system from wear, deposits andcorrosion. Improves engine running and prevents performance decrease.Increases the lubricity of diesel fuels . Clean engines need less fuel andreduce emissions.
250 ml 6 3722 1
250 ml 6 236731
250 ml 6 372512
1 l 6 3726 1
1 l 6 1812 3
205 l 1 3730
250 ml 6 5139 12
250 ml 6 895333
250 ml 6 218532
250 ml 6 835728
250 ml 6 837229
250 ml 6 838630
200 l 1 1776
For all diesel engines both with
and without diesel particulatefilters. Tested safe with catalyticconverters and turbochargers.For adding directly to the fueltank. Perfectly compatible with allconventional diesel and biodieselfuels. Can contents are sufficientfor up to 70 l fuel. Perfect for con-stant use for any kind of refueling.
For all diesel engines both withand without diesel particulatefilters as a preventative measureor to deal with problems . Testedfor turbochargers. For addingdirectly to the fuel tank. Perfectlycompatible with all conventionaldiesel and biodiesel fuels alongwith vegetable oils. 250 ml are
sufficient for up to 70 l fuel (dos-age 1 : 280). Effec t lasts up to2,000 km.
For all diesel engines with andwithout diesel particulate filters especially suitable for preventa-tive use for common rail andpump-jet technology. Preventa-tive. Tested for turbochargers.For adding directly to the fueltank. Can contents are sufficientfor up to 75 l fuel. Effect lasts upto 2,000 km.
Motorbike
Motorbike Speed AdditiveState-of-the-art, ash-free combination of agents with acceleration-enhancing,cleaning, dispersing and material-protecting properties. The pro duct hasbeen formulated using state-of-the-ar t additive and fuel technologies inaccordance with the requirements of todays engines, fuels and running con-ditions. Ensures increased driving enjoyment due to optimized performance.The engine starts easier and also runs smoother.
Motorbike Gasoline StabilizerPreserves and protects fuel against aging and oxidation. Prevents corrosionthroughout the entire fuel system. Prevents problems from occurring whenmotorbikes, motor scooters, ATVs, snowmobiles and other gasoline- driven2-stroke and 4-stroke engines are decommissioned. Increases oper ationalreliability. The product has a lasting effect.
150 ml 6 3040 1
250 ml 6 3041 1
Added to the fuel of all 4-strokeand 2-stroke gasoline engines.
Suitable for all 4-stroke and2-stroke gasoline engines espe-cially for preventive care. Testedfor turbochargers and catalyticconverters.
1D GB I E P 3D NL F GR ARAB 12D F NL 28D E P 29GB ARAB F 30D H RO 31DK S FIN 32D PL BG33GB GR I
FUEL ADDITIVES FOR DIESEL
Car
Motorbike Performance Setconsisting of:1 x Motorbike 4T Bike Additive (Par t.-No. 1581)1 x Motorbike Gasoline Stabilizer (Par t.-No. 3041)
1 Piece 1 3034
-
7/24/2019 liqui moly5603
12/15612
Cont. Packaging Part Unit No.
Area of use
FUEL ADDITIVES FOR DIESEL
Car
Diesel Smoke StopAccelerates soot burn-off and reduces ex haust smoke. Reduces emissionsand odor nuisance. Completely effective right after adding. Cleans the dieselinjection system and makes the engine run smooth. Optimizes the emissiontest values.
Diesel Flow-FitIncreases the fluidity and filter flow properties of the diesel fu el. Can be useddown to 31 C outdoor temperature (dependent on the quality of the diesel
fuel). Guarantees reliability of all diesel-powered engines at low tempera-tures.
Diesel Flow Fit KIncreases the fluidity and filter flow properties of the diesel fu el. Can be useddown to 31 C outdoor temperature (dependent on the quality of the dieselfuel). Guarantees reliability of all diesel-powered engines at low tempera-tures.
150 ml 6 5180 12
150 ml 20 270328
150 ml 12 180833
150 ml 20 836329
150 ml 12 834032
150 ml 6 5130 12
150 ml 20 1877 5
150 ml 20 835328
150 ml 12 838130
150 ml 12 834432
150 ml 20 892933
20 l 1 5109
1 l 6 5131 13
1 l 6 1878 5
5 l 1 5132 20 l 1 5133 205 l 1 1879
For all diesel engines both withand without diesel particulatefilters especially suitable forpreventative use. Turbochargertested. For adding directly to thefuel tank. Optimal effect by addingevery time you fill up. Perfec tlycompatible with all conventionaldiesel and biodiesel fuels. Cancontents are sufficient for up to50 l fuel.
For all diesel engines both withand without diesel particulate
filters especially suitable forpreventative use. Turbochargertested. Optimal effect by adding tothe fuel tank before the fuel gels(at around 0 C). Fully compatiblewith all conventional diesel andbiodiesel fuels, and with fuel oil.Can contents are sufficientfor up to 75 l fuel.Note: Frost sensitive; thereforestore above 0 C!
For all diesel engines both withand without diesel particulatefilters especially suitable forpreventative use. Turbochargertested. Optimal effect by adding tothe fuel tank before the fuel gels(at around 0 C). Fully compatible
with all conventional diesel andbiodiesel fuels, and with fuel oil. 1l is sufficient for 1,000 l fuel (dos-ing 1:1000).Note: Frost sensitive; thereforestore above 0 C!
1D GB I E P 5D GB RO RUS UA 12D F NL 13D GB NL F E I P 22D F I 28D E P 29GB ARAB F 30D H RO31DK S FIN 32D PL BG 33GB GR I
Super Diesel AdditiveRemoves deposits in the diesel injection system and in the combustionchamber and prevents them from renewed form ation. Maintains all compo-nents in the diesel injection system. Prevent s jet needles from fusing andgumming. Increases the cetane rating and improves the ignition performanceof diesel fuel. Ensures quiet engine running. Protects the entire fuel systemfrom corrosion and wear. Optimizes the emission test values and perfor-mance of the engine. Clean engines need less fuel and r educe emissions.
Diesel Particulate Filter ProtectorHighly effective additive that reduces the build-up of particulates and thusincreases the service life of the diesel par ticle filter. Vehicles used for citydriving and those that drive short distances are especially affected by blockeddiesel particle filters. When used r egularly, the diesel particle filter remainsclean and expensive repair and servicing times are avoided. Diesel particlefilter protector ensures optimal fuel combustion and reduces the build-up ofparticulates. This also helps in reducing emissions.
Diesel Lubricity AdditiveProtects the entire fuel system fr om corrosion and reduces wear. Increases
the life us diesel injection pumps and other part s of the fuel sy stem. Increasesreliability.
Diesel PurgeRemoves deposits on injection nozzles and in the combustion chamber. In-creases the cetane rating. Eliminates engine operation problems such asknocking in idle and provides round and quiet engine r unning. Protects theentire fuel system from corr osion. Optimizes the emission test values. Canalso be used as a preventative measure. Clean engines n eed less fuel andreduce emissions.
250 ml 6 5120 12
250 ml 20 250428
250 ml 20 281431
250 ml 20 180633
250 ml 20 190422
250 ml 20 836629
250 ml 12 837930
250 ml 12 834332 5 l 1 5140 50 l 1 5145 205 l 1 5146
250 ml 6 514812
250 ml 6 214628
250 ml 20 718033
250 ml 6 834931
250 ml 6 265032
150 ml 6 5122 12
500 ml 6 5170 12
500 ml 12 218630
500 ml 20 250928
500 ml 20 281331
500 ml 20 1811 33
500 ml 20 838029
500 ml 12 266632
1 l 6 2520 1
5 l 1 2525 1 50 l 1 2524 205 l 1 2528
For all diesel engines both withand without diesel particulate fil-ters as a preventative measureor to deal with problems. Testedfor turbochargers. For addingdirectly to the fuel tank. Perfectlycompatible with all conventionaldiesel and biodiesel fuels. 250 mlare sufficient for up to 75 l fuel(dosage 1 : 300). Ef fect lasts up to2,000 km.
Suitable for diesel vehicles withdiesel particle filters, providedthese have not already beenequipped with an electronicallycontrolled additive tank systemfor filter regeneration (as used byCitroen and Peugeot, for example).The container is sufficient for 5070 litres of diesel fuel. Note: Avoidexcess dosage and use in combi-nation with Diesel Smoke Stop!
For all diesel engines both withand without diesel particulate fil-ters for preventative use. Testedfor turbochargers. For addingdirectly to the fuel tank . Optimaleffect by adding every time you fillup. Perfectly compatible with allconventional diesel and biodieselfuels. Can contents are sufficientfor up to 80 l fuel.
For all diesel engines both withand without diesel particulatefilters. Preventative during everyinspection, after repairs on thefuel system or to solve problems(see application description on thepack or in the technical data-sheet). Turbocharger tested.Perfectly compatible with all con-ventional diesel and biodieselfuels. Can contents are sufficientfor up to 75 l fuel.
-
7/24/2019 liqui moly5603
13/156
ADDITIVES
13
Cont. Packaging Part Unit No.
Area of use
FUEL ADDITIVES FOR DIESEL
Car
Boat
Anti-Bacterial Diesel-AdditiveHighly effective biocide with wide action spectrum against bacteria, yeastsand mould. The biocide agent does not create any corrosive combustionproducts and has been approved by leading engine manufactur ers. For pre-ventative use on diesel vehicles that have been decommissioned for a longtime such as construction machinery, commercial vehicles, motorhomes,passenger cars, stor age tankers etc. and for sterilizing already infested tanksystems. Use disinfectants safely. Always read the label and product infor-mation before use.
SPEED Diesel AdditiveRemoves deposits in the diesel injection system and in the combustion
chamber and prevents them from renewed formation. Prevent s jet needlesfrom fusing and gumming. Ensures quiet engine running. Protects the entirefuel system from corrosion and wear. Optimizes engine performance. Cleanengines need less fuel and reduce emissions.
Diesel Additiv KCombination of agents with cleaning, dispersing and material-protectingproperties. The Lubricit y Improver contained provides better lubricity fordiesel fuels low in sulfur. Protects the entire fuel system fr om the formationof corrosion and prevents wear associated with low-sulfur fuel .
Diesel Smoke Stop ConcentrateDiesel Smoke Stop is a highly effective diesel fuel additive with an importantstate-of-the-art effect. The product reduces soot emissions from dieselengines by accelerated soot combustion. Diesel Smoke Stop considerablyimproves the environmental compatibility of diesel passenger vehicles andtrucks and prevents odor pollution and impairment of visibility. Diesel SmokeStop also keeps engines and injectors clean, prevents seizing of injectorneedles, maintains engine performance and reduces the frequency of repairs.
1 l 6 5150 7
1 l 6 2368 2
5 l 1 5121 7
60 l 1 5157200 l 1 5134
1 l 6 5160
1 l 6 266332
1 l 6 2616 4
50 l 1 1901 205 l 1 1978
250 ml 20 252128
250 ml 20 836829
250 ml 20 717933
205 l 1 2519
For all diesel engines both withand without diesel particulatefilters as a preventative measureor to deal with problems. Turbo-charger tested. For adding directlyto the fuel tank. Perfectly com-patible with all conventional dieseland biodiesel fuels. One filling ofthe dispenser 25 ml (integratedin the cap) is sufficient during pre-ventative use for 25 l fuel (dosing1 : 1000) and for using duringproblems for 5 l fuel (dosing 1:200).
For all diesel engines both with
and without diesel particulatefilters as a preventative meas-ure or to deal with problems. Tur-bocharger tested. For adding di-rectly to the fuel tank. Perfec tlycompatible with all conventionaldiesel and biodiesel fuels. Onefilling with the 25 ml dispenser(integrated in the cap) is sufficientfor 10 l fuel. For permanent useevery time you fill up.
For all diesel injection systems.Ideally suitable for preservingengines when decommissionedfor long periods under extremeconditions. 1 liter is sufficientfor 1000 liters of fuel . Add 1 % inthe event of decommissioningand preservation of vehicles orassemblies (1 liter for 100 litersof fuel).
For all diesel engines, for agricul-tural and forestry as well as sta-tionary diesel engines.
Marine Diesel AdditiveHighly effective biocide with wide action spectrum against bacteria, yeastsand mould. The biocide agent does not create any corrosive combustionproducts and has been approved by leading engine manufactur ers. Use dis-infectants safely. Always read the label and product information before use.
1 l 6 1008 7For preventative use or for steri-lizing contaminated tank systemson boats or in storage tanks.Use a shock dose of 1 : 200 onalready contaminated systems.One measuring cup, (25 ml),is sufficient for 5 l diesel fuel.For preventative us e: 1 : 1000,one measuring cup (25 ml) issufficient for 25 l diesel fuel.
2D DK FIN N S 4D PL H RO TR 7D GB F E I GR 28D E P 29GB ARAB F 32D PL BG 33GB GR I
-
7/24/2019 liqui moly5603
14/15614
Cont. Packaging Part Unit No.
Area of use
RADIATOR ADDITIVES
1D GB I E P 12D F NL 22D F I 28D E P 29GB ARAB F 30D H RO 31DK S FIN 32D PL BG 33GB GR I
Radiator Stop-LeakSmall leaks caused by stone impacts, porou s soldering points and hairlinecracks in the cooling simple are easy to localize (one notices that the coolingwater level is sinking). LI QUI MOLY Radiator Stop-Leak completely sealssuch leaks immediately with ease. Secures the combustion chamber fromdamages caused by coolant admission.
150 ml 6 333012
150 ml 20 250528
150 ml 20 837129
150 ml 12 834732
150 ml 20 895633
250 ml 20 282831
250 ml 20 181033
250 ml 20 267632 250 ml 20 192122
250 ml 20 837029
250 ml 12 838530
For all cooling water and heatingsystems with and without waterfilters. Also suitable for aluminumand plastic radiators. The contentis sufficient for 10 litres of coolant.Compatible with all standardtreating agents for coolants andantifreeze. Can also be used as apreventative measure.
Radiator CleanerDeposits in the cooling/heating system form barriers against heat exchange,blocking the thermostat and regulating mechanisms. Engine temperaturesthat are too high cause the engine to run u neconomically with increasedwear and with a high risk of damage. LIQUI MOLY Radiator Cleaner removescalcareous deposits, ensuring the ideal engine temperature and reliability.Does not contain any aggressive acids and lyes.
300 ml 6 332012
300 ml 20 250628
300 ml 20 282931
300 ml 20 180433
300 ml 20 269932
300 ml 20 836929
300 ml 12 838330
For all cooling water and heatingsystems. 300 ml are sufficient for10 l cooling water. Compatiblewith all standard treating agentsfor coolants and antifreeze.
Motorbike
Motorbike Radiator CleanerConcentrate for cleaning coolant circuits. Deposits in the cooling /heatingsystem create blockages for heat exchange and also block thermos tat valvesand control mechanisms. When engine temperature s are too high, the en-gine runs uneconomically and suf fers excessive wear at considerable risk ofdamage. Removes deposits containing oil and limescale, and ensures thatthe engine runs reliably and at the optimum temperature. Does not containaggressive acids or alkalis.
Motorbike Radiator Stop LeakDispersion for sealing leaks in coolant circuits. T he product reliably sealshairline cracks and small leaks. C an be used preventively when repair workhas been carried out on the cooling system. The solids dispersion is stabi-lized in carrier fluid.
150 ml 6 3042 1
125 ml 6 3043 1
Suitable for all coolant circuits.Compatible with all conventionalcoolant additives and antifreezes.
For sealing minor leaks in coolantsystems with and without coolantfilter. Also suitable for aluminiumand plastic radiators.
-
7/24/2019 liqui moly5603
15/156
ADDITIVES
15
Cont. Packaging Part Unit No.
Area of use
WORKSHOP PROLINE
Oil-Additives
Pro-Line Visco-PlusReduces oil consumption. Keeps the viscosity of the motor stable. For con-stant oil pressure. Visco-Plus pr ovides excellent protection against the oilsmechanical shearing loss even under the toughes t conditions. Preventsmotor oil thinning under frequent cold starts . The improved sealing of themoving engine parts r educes oil consumption. That makes it especially suit-able for older cars. Reduces hydraulic valve lifter noise.
Pro-Line TBN-BoosterSpecially developed oil additive to extend the oil change intervals in coun-tries with high sulfur content in the fuel. By increasing the neutralizationcapacity, the maintenance costs and the vehicle downtimes can be consider-ably reduced. The product can be added at any time.
Pro-Line Gear Oil AdditiveAn additive specifically developed for manual transmissions and differentialgears. It significantly reduces wear and decreases temperature peaks.The transmission runs more quietly, enables softer shifting and heats upless strongly. Even old transmissions regain quiet r unning and increasedperformance through the smoothing of the tooth flanks. Increases reliabilityand provides antifriction properties through MoS2.
Pro-Line Gear Oil Leak StopStops oil losses in dripping transmissions. Regener ates hardened rubberand plastic seals. No more polluting oil stains. Protects clutches from oilfouling, prevents incomplete lubrication and transmission damages that arecaused by too low of oil level.
1 l 6 5196 1
1 l 6 25161
150 ml 12 5198 9
500 ml 6 5199 1
205 l 1 8942
Suitable for all petrol and dieselengines with and without dieselparticulate filter (DPF). Can bemixed with all commercial motoroils. 1 l suff icient for up to 20 l oilvolume.
Can be mixed and is compatiblewith all commercially availablefour-stroke motor oils for gaso-line and diesel vehicles. Adding toother additives such as Oil Addi-tive, Cera Tec, etc. is possible.
For all manual transmissions,power take-off and differentialgears. Do not use in ful ly auto-matic transmissions and gearswith clutches that run in oil baths.150 ml sufficient for approx.15 l transmission oil.
For all manual transmissions,power take-off and differentialgears. Do not use in ful ly auto-matic transmissions and gearswith clutches that run in oil baths.500 ml sufficient for approx.10 l transmission oil.
Pro-Line Oil Loss StopOil Loss Stop regenerates rubber and plastic engine seal s (e.g., shaft sealsand valve stem seals). Reduces oil consumption through piston rings (dueto its uniform viscosity) and throug h valve guides (by regenerating the seals).Prevents blue exhaust smoke. Compensates for viscosity r eduction and
dampens engine noise.
1 l 6 5182 1Suitable for all petrol and dieselengines with and without dieselparticulate filter (DPF). Can bemixed with all commercial motor
oils. 1 l is suf ficient for 15 l motoroil. Sealing action effective afterapprox. 600 800 km.
1D GB I E P 2D DK FIN N S 9D GB E 32D PL BG
Pro-Line Engine Wear ProtectionThe MoS2low-viscosity engine oil creates a heav y duty slide film on allfrictioning and sliding surfaces. It reduces friction, guaranteeing the aggre-gates run more smoothly. That produces these benefits: Significant fueland oil saving, scientifically proven wear reduction, fewer breakdowns andoutstanding antifriction properties.
1 l 6 5197 1For petrol and diesel engines.Can be mixed with all commercialmotor oils. 1 l sufficient for approx.25 l motor oil. Tested safe withcatalytic converters and turbo-chargers.
Pro-Line Engine FlushCleans the engine from the inside. Removes deposits from lubr ication holes,oil screens, piston ring zone, etc. Reduces engine noise and oil consum ption.Improves compression. Increases vehicles reliability. Allows the fresh oil todevelop its full performance after an oil change.
500 ml 6 2427 1
500 ml 6 2978 2
500 ml 6 266232
1 l 6 2425 1
5 l 3 2428
Suitable for all petrol and dieselengines with and without dieselparticulate filter (DPF). Testedsafe with catalytic converters andturbochargers. Motor cleaningbefore an oil change. 500 mlsufficient for up to 5 l oil volume.
-
7/24/2019 liqui moly5603
16/15616
Cont. Packaging Part Unit No.
Area of use
WORKSHOP PROLINE
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB
Pro-Line Radiator CleanerDeposits in the cooling/heating system form barriers against heat exchange,blocking the thermostat and regulating mechanisms. Engine temperaturesthat are too high cause the engine to run u neconomically with increasedwear and with a high risk of damage. Radiator Cleaner removes calcareousdeposits, ensuring the ideal engine temperature and r eliability. Does notcontain any aggressive acids and lyes.
1 l 6 5189 1For all cooling water and heatingsystems. Compatible with allstandard treating agents for cool-ants and antifreeze. 1 l sufficientfor up to 50 l cooling water.
Radiator Additives
Fuel Additives
Pro-Line Fuel Injection CleanerRemoves deposits on injection valves, intake valves, spark plugs and in th ecombustion chamber and prevents them from reforming . Improves enginerunning and optimizes the exhaust gas values. Eliminates start problemsand rough engine running . Maintains and protects the entire fuel systemfrom wear, deposits and corrosion. Clean engines need less fuel and re duceemissions.
Pro-Line Super Diesel AdditiveWith Cetane Plus for more eng ine power, less knocking, quieter run, easystarting. Cleans engine and injection s ystem and prevents jet needles fromfusing and gumming. Secures optimal use of fuel and saves energy duringcombustion. Reduces corrosion and wear. The plus for super diesel fuels.Suitable for low-sulfur diesel fuels.
Pro-Line Super Diesel Additive KWith Cetane Plus for more eng ine power, less knocking, quieter run, easystarting. Cleans engine and injection s ystem and prevents jet needles fromfusing and gumming. Secures optimal use of fuel and saves energy duringcombustion. Reduces corrosion and wear. The plus for super diesel fuels.
Suitable for low-sulfur diesel fuels.
Pro-Line Diesel System CleanerReduces the pollutant emissions, optimizing smoke opacity before theemissions test. Successfully tested in international testbench investigations.Cleans out harmful deposits in injection noz zles, the entire fuel system andthe combustion chambers. Prevents jet needles from fusing and gumming.Optimizes the combustion process. The engine regains it s original power.
500 ml 6 5153 1
500 ml 6 2979 2
500 ml 6 2970 3
1 l 6 5176 1
20 l 1 2336
500 ml 6 5156 1
60 l 1 5159
Suitable for all petrol engines.For adding directly to the fueltank. Preventative during everyinspection, after repairs to thefuel system, for solving problemsand after every JetClean cleaning.Can contents are sufficient for upto 70 l fuel.
For all diesel engines in cars,trucks, tractors, constructionequipment and stationary engines,including turbocharged engines.Perfectly suited for preservingengines. Even during long stand-stills under extreme conditions.With long-term effect sufficientfor 2000 km. 1 l sufficient for max.300 l diesel fuel.
For all diesel engines both withand without diesel particulatefilters. For adding directly to thefuel tank. Perfectly compatible
with all conventional diesel andbiodiesel fuels. 1 l is suf ficient for500 l fuel (dosage 1 : 500). Testedfor turbochargers.
Suitable for all diesel and turbo-diesel engines with and withoutdiesel particulate filter (DPF).For adding directly to the fueltank. Preventative during everyinspection, after repairs to thefuel system, for solving problemsand after every JetClean cleaning.Can contents are sufficient forup to 70 l fuel.
Pro-Line Diesel System Cleaner KReduces the pollutant emissions, optimizing smoke opacity before theemissions test. Successfully tested in international testbench investigations.Cleans out harmful deposits in injection noz zles, the entire fuel system andthe combustion chambers. Prevents jet needles from fusing and gumming.Optimizes the combustion process. The engine regains it s original power.
Pro-Line Diesel Particulate Filter ProtectionHighly effective additive that reduces the build-up of particulates and thusincreases the service life of the diesel par ticle filter. Vehicles used for citydriving and those that drive shor t distances are especially affected byblocked diesel particle filters. When used regul arly, the diesel particle filterremains clean and expensive repair and serv icing times are avoided. En-sures optimal fuel combustion and reduces the build-up of par ticulates.This also helps in reducing emissions.
1 l 6 51441
1 l 6 5123 1
20 l 1 5126
Suitable for all diesel and turbo-diesel engines with and withoutdiesel particulate filter (DPF).For adding directly to the fuel tank.Preventative during every inspec-tion, after repairs to the fuelsystem, for solving problems andafter every JetClean cleaning. Cancontents for maximum 300 l fuel.
Suitable for diesel vehicles withdiesel particle filters, providedthese have not already beenequipped with an electronicallycontrolled additive tank systemfor filter regeneration (as used byCitroen and Peugeot, for example).Also suitable for trucks and buses.
-
7/24/2019 liqui moly5603
17/156
ADDITIVES
17
Cont. Packaging Part Unit No.
Area of use
WORKSHOP PROLINE
Service Products
Pro-Line Throttle Valve CleanerSpecial active solvent for cleaning typical dirt and deposits in the intake andthrottle valve area. Loosens and removes all dirt y deposits and dirt such asoil, resin, glue, etc. It guarantees the fu nctional performance of the movingparts and reduces fuel consumption. Increases the reliability of petrol-pow-
eredengines.
Pro-Line Intake System Cleaner DieselSpecial active solvent for cleaning typical dirt and deposits in the intake andthrottle valve area. Loosens and removes greasy deposits and dir t such asoil, soot, etc. It guarantees the functional performance of the moving partsand reduces fuel consumption. Increases the reliability of diesel-poweredengines.
400 ml 6 5111 1
400 ml 6 2846 2
400 ml 6 8986 3
400 ml 6 5168 1
400 ml 6 2858 2
400 ml 6 2388 3
For the intake and throttle valvearea including nozzles and holes.Suitable only fur use in internalcombustion engines!
For cleaning the entire intakesystem. Suitable only fur use indiesel engines!
DPF Pressurized Tank Spray GunPowder-coated aluminum tank with commercially available compressed airconnection and non-return valve. Filling amount 1 liter. The material quantitycan be specified exactly by means of a control valve. The air fed into the spraystream causes the sprayed material to be very finely atomized.
1 Piece 1 7946For the processing of Pro-LineDiesel Particulate Filter Cleanerand Pro-Line Diesel ParticulateFilter Purge with the especiallydeveloped DPF gun with 5 sprayprobes (part no. 7945).
DPF gun with 5 spray probesSpecially developed gun with 5 different moving probes made from stainles ssteel for processing Pro-Line Diesel Particulate Filter Cleaner and Pro-LineDiesel Particulate Filter Purge. The gu n has a flexible hose connection witha length of 1 m and push-on n ipples that fit the DPF pressurized tank spraygun (part no. 7946).
1 Piece 1 7945Depending on the type of vehicle,enables ideal access for cleaningpassenger car diesel particulatefilters (DPF/FAP) when installed.
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB
Pro-Line Diesel Particulate Filter CleanerHighly effective fluid for cleaning clogged passenger c ar diesel particulatefilters when installed. Dissolves contaminants in diesel par ticulate filters.Secures optimum vehicle handling, engine perfor mance and low fuel con-sumption. Regular cleaning in combination with flushing can help avoid ex-pensive repair costs. Cleaning occurs with a DPF pressurized tank spray gun(part no. 7946) and the specially developed DPF gun with 5 spray probes (partno. 7945).
Pro-Line Diesel Particulate Filter PurgeHighly effective fluid for flushing passenger car diesel particulate filters(DPF/FAP) after cleaning with Pro-Line Diesel Particulate Filter Cleanerwhen installed. Secures optimum vehicle handling, engine performanceand low fuel consumption. The soot is diss olved and distributed in the dieselparticulate filter so that it can be burned off with normal regeneration.Flushing occurs with a DPF pressurized tank spray gun (part no. 7946)and the specially developed Pro-Line Angled Spray Probe (part no. 7947)or Pro-Line Straight Spray Probe (part no. 7948).
1 l 6 5169 1
1 l 6 2818 2
500 ml 6 5171 1
500 ml 6 2820 2
For passenger car diesel engineswith diesel particulate filter (DPF/FAP). Special short-distance vehi-cles and city vehicles are primar-ily affected by problems withclogged diesel particulate filters.
For passenger car diesel engineswith diesel particulate filter (DPF/FAP). Special short-distancevehicles and city vehicles are pri-marily affected by problems withclogged diesel particulate filters.
Pro-Line Radiator Stop Leak KSmall leaks caused by stone impacts, porous soldering points and hairlinecracks in the cooling simple are easy to localize (one notices that the coolingwater level is sinking). Radiator Stop Leak K completely seals such leaksimmediately with ease. Secures the combustion chamber from damagescaused by coolant admission.
250 ml 12 5178 1For all cooling water and heatingsystems with and without waterfilters. Also suitable for aluminumand plastic radiators. 250 mlsufficient for up to 40 l coolingwater. Compatible with all stand-ard treating agents for coolantsand antifreeze. Can also be used asa preventative measure.
Radiator Additives
-
7/24/2019 liqui moly5603
18/15618
Cont. Packaging Part Unit No.
Area of use
WORKSHOP PROLINE
Adapter Connector Set 38 52Accessory for the JetClean Tronic device with 15 parts. 8 m etal and 3 plasticadapters, 1 reduction coupling and 3 removal tools .
1 Piece 1 8200For connecting the JetClean Tronicunit to each vehicle injectionsystem such as for Ford EU/USA,GM and various Japanese vehiclemanufacturers.
Service Products
1D GB I E P
JetClean TronicWith this completely automatic cleaning appliance, you can easily and pro-fessionally clean all carburetion and injection systems. The unit can be usedfor petrol and diesel vehicles and runs through a computer- controlled, auto-matic cleaning cycle. On top of that, the unit can be used to pump out the fueltank and even completely clean the interior.
Adapter Connector Set 1 32Accessory for the JetClean Tronic device with 32 parts. 30 metal and 1 plasticpipe, 1 metal clamp.Included in the JetClean Tronic unit scope of delivery.
Adapter Connector Set 33 37Accessory for the JetClean Tronic device with 5 parts . 5 plastic adapters.Included in the JetClean Tronic unit scope of delivery.
1 Piece 1 5124
1 Piece 1 8263
1 Piece 1 8299
Suitable for all petrol and dieselengines including tank cleaning.Especially developed for usingwith the LIQUI MOLY Pro-LineJetClean additives.
For connecting the JetClean Tron-ic unit to each vehicle injectionsystem from European, Americanand Japanese vehicle manufac-turers.
For connecting the JetClean Tron-ic unit to each vehicle injectionsystem from European, American
and Japanese vehicle manufac-turers.
PAG Air Conditioning Oil 46Fluorescent, fully synthetic air conditioning system oil based on polyalkyleneglycol is highly compatible and miscible with R134a. Not suitable for refrig-erant circuits that are filled with R1234y f refrigerant and not for hybrid andelectric vehicles with electrically driven compressors. It meets the require-ments placed by the prevailing air conditioning compressor manufac turers.Complies with ISO VG Clas s 46 acc DIN 51519.
PAG Air Conditioning Oil 100Fluorescent, fully synthetic air conditioning system oil based on polyalkyleneglycol is highly compatible and miscible with R134a. Not suitable for refrig-erant circuits that are filled with R1234y f refrigerant and not for hybrid andelectric vehicles with electrically driven compressors. It meets the require-ments placed by the prevailing air conditioning compressor manufac turers.Complies with ISO VG Class 100 acc DIN 51519.
250 ml 6 4083 1
250 ml 6 4089 1
Developed for air-conditionersfilled with R134 a. It is used tolubricate, seal and cool the slidingand rotating parts in the refriger-ant circuit. Comply with the vehicleor compressor manufacturersinstructions.
Developed for air-conditionersfilled with R134 a. It is used tolubricate, seal and cool the slidingand rotating parts in the refriger-ant circuit. Comply with the vehicleor compressor manufacturersinstructions.
PAG Air Conditioning Oil 150Fluorescent, fully synthetic air conditioning system oil based on polyalkyleneglycol is highly compatible and miscible with R134a. Not suitable for refrigerantcircuits that are filled with R1234yf refrigerant and not for hybrid and electric vehicles with electrically driven compressors. It meets the requirementsplaced by the prevailing air conditioning compressor manufacturers . Com-plies with ISO VG Class 150 acc DIN 51519.
250 ml 6 4082 1Developed for air-conditionersfilled with R134 a. It is used tolubricate, seal and cool the slidingand rotating parts in the refriger-ant circuit. Comply with thevehicle or compressor manufac-turers instructions.
JetClean
-
7/24/2019 liqui moly5603
19/156
ADDITIVES
19
Cont. Packaging Part Unit No.
Area of use
WORKSHOP PROLINE
JetClean
JetClean PlusFor fast, easy petrol and diesel injection system cleaning. T he pressure tankhas a capacity of 5 liters cleaning fluid. The unit is s upplied with the JetCleanadapter set in a blister pack (Cat. no. 7911). Extra accessor ies such as JetClean compressed air connection Cat. no. 5112 JetClean Universal Adapter Set Cat. no. 5114optionally available.
JetClean Universal Adapter SetAccessory for the JetClean Plus unit.
JetCleanCompressed Air Connector (JetCleanPlus)Eases cleaning petrol and diesel injection systems with J etClean Plus.Facilitates uniform system pressure without having to re-pump. Length: 2 m.
Pro-Line JetClean Fuel System CleanerHighly concentrated, ready to use cleaning fluid for immediate use with theJetClean unit. Removes deposits on injection valves, intake valves, sparkplugs and in the combustion chamber and prevents them from formingagain. Improves engine running and optimizes the exhaust gas values.Eliminates starting problems, rough engine running , poor throttle responseand power loss. Maintains and protects the entire fuel system fr om wear,deposits and corrosion. Clean engines need less f uel and reduce emissions.
Pro-Line JetClean Fuel System Cleaner KCleaning fluid in concentrated form. Mix can contents with 4.5 liters fuel ina suitable container. Apply with the JetClean unit. Removes deposits oninjection valves, intake valves, spark plugs and in the combustion chamberand prevents them from forming again. Impr oves engine running and opti-mizes the exhaust gas values. Eliminates starting problems, rough enginerunning, poor throttle respon se and power loss. Maintains and protects theentire fuel system from wear and corrosion. Clean engines need less fueland reduce emissions.
Pro-Line JetClean Diesel Injection CleanerHighly concentrated, ready to use cleaning fluid for immediate use with theJetClean unit. Removes deposits in the injection pump, on injection nozzlesand in the combustion chamber and keeps them from forming again. Pr e-vents jet needles from fusing and gumming. Improves engine running andoptimizes the exhaust gas values. Eliminates starting problems, rough en-gine running, poor throttle r esponse and power loss. Maintains and protectsthe entire fuel system from wear and corrosion. Clean engines need less fueland reduce emissions.
Pro-Line JetClean Fuel Tank CleanerHighly concentrated, ready to use cleaning fluid for immediate use with theJetClean unit. Looses and removes deposits and other pollutants in th efuel tank as well as in the line system and binds water that may be present.Improves the engine running. Maintains and protects the entire fuel systemfrom wear and corrosion. Increases reliability.
1 Piece 1 5118 21
1 Piece 1 5114
1 Piece 1 5112
1 l 6 51471
5 l 3 5151 1
500 ml 6 5152 1
500 ml 6 5154 1
500 ml 6 2996 2
500 ml 6 2962 3
1 l 6 5149 1
5 l 3 5155 1
500 ml 6 5137 1
Suitable for all petrol and dieselengines. Especially developedfor using with the LIQUI MOLYPro-Line JetClean additives.
Accessory for JetClean Plus.Connection through compressedair system.
Suitable for all petrol engines. Fordirect application via the JetCleanunit. LIQUI MOLY use recommen-dation: Preventative during everyinspection, after repairs to thefuel system or for dealing withproblems. Tested safe with cata-lytic converters and turbochargers.
Suitable for all petrol engines. Fordirect application via the JetCleanunit. LIQUI MOLY use recommen-dation: Preventative during everyinspection, after repairs to thefuel system or for dealing withproblems. Tested safe with cata-lytic converters and turbochargers.
For all diesel engines both withand without diesel particulate fil-ters (DPF). For direct applicationvia the JetClean unit. LIQUI MOLYuse recommendation: Preventa-tive during every inspection, afterrepairs to the fuel system or fordealing with problems. Turbo-charger tested.
Suitable for all petrol and dieselengines with and without dieselparticulate filter (DPF). For directapplication via the JetClean unit.LIQUI MOLY use recommendation:
For handling problems. Testedsafe with catalytic converters andturbochargers.
Japan Incectors AdapterAccessory for the JetClean Tronic unit. Is needed for vehicles without Boschinjection vales for the Clean jet vacuum menu item.Included in the JetClean Tronic unit scope of delivery.
1 Piece 1 8286For connecting the JetClean Tron-ic power set to the vehicle injec-tion valve especially for vehiclesthat do not have Bosch injectionvalves.
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB 21D GB I E P RUS
-
7/24/2019 liqui moly5603
20/15620
Lubricants
Engine oils for all vehicleswith all current releases.
Hydraulic oils for servosteering, hydropneumaticsuspension and convertiblefolding-top mechanisms.
For special oils, LIQUI MOLYoffers an oil cabinet for 8 x 20 litreand 2 x 60 litre or 16 x 20 litre
oils in connection with a specificpurchase quantity.
-
7/24/2019 liqui moly5603
21/15621
LUBRICANTS
Lubricants
Engine Oils 4-stroke Car 22
Engine Oils for Gas-driven Vehicles 31
Engine Oils Classic Vehicles 32
Engine Oils 4-stroke Motorbike Street 32
Engine Oils 4-stroke Motorbike Offroad 34
Engine Oils ATV/SxS 35
Engine Oils 4-stroke Boat 35
Engine Oils 4-stroke Truck 46
Engine Oils 4-stroke Tractor 38
Engine Oils 4-stroke Lawnmower 38
Engine Oils 2-stroke Universal 38
Engine Oils 2-stroke Tractor 39
Engine Oils 2-stroke Motorbike Street 39
Engine Oils 2-stroke Motorbike Offroad 40
Engine Oils Kart 40
Engine Oils 2-stroke Boat 40
Engine Oils 2-stroke Chain Saw 41
Gear Oils 41
Gear Oils Tractor 46
Gear Oils Motorbike 47
Gear Oils Boat 47
Hydraulic Oils 48
Brake Fluids 50
Compressor Oils 50
Workshop Equipment 51
Greases 56
Pastes 59
Bonded Coatings/Dry Lubricants 61
Contact Lubricants 61
Greases for wheel bearing
and drive shaft joints.
Gear oil for manual
gearbox and automatic
gearbox.Hypoid gear oil for diffe-
rentials with and without
differential lock.
Lubricants for door hinges
and door holding systems.
Silicone greases for a durable
lubrication of slide bars.
Tire Fitting Paste, also
available as a spray, for
professional assembly.
-
7/24/2019 liqui moly5603
22/15622
Cont. Packaging Part Unit No.
Area of use
ENGINE OILS 4STROKE CAR
Fully Synthetic
Synthoil Energy 0W-40For the greatest engine performance!Fully synthetic low-viscosity motor oil. Fast cold star t properties. Keeps oilconsumption low. Prevents build-up of harmful deposits. Excellent dir t-suspending and cleaning properties keep the engine optimally clean.
Synthoil Longtime Plus 0W-30Special development for VW, Audi, SEAT and SKODA petrol and dieselvehicles with service interval extension (also pump jet engines).The fully synthetic low-viscosity motor oil from the Longlife 2 generationkeeps the engine perfectly clean. Exceeds the high Volksw agen test require-ments. Reduces fuel consumption in one of the toughest consu mption testsin Europe (CEC-L-54-T-96/ MB M 111) by more than 2.5% as compared withthe specified reference oil. Fast cold-start oiling provides excellent enginewear protection during the start and warm-up phase.
Synthoil Longtime 0W-30For maximum fuel saving.Fully synthetic low-viscosity motor oil for the cost-conscious driver. Fastestcold-start oiling during starting and minimum friction during daily drivingensure an extremely long engine service life. Keeps oil consumption low.
Prevents the build-up of harmful deposits and guarantees total engine power.
Synthoil High Tech 5W-40Provides a stable lubricating film.Fully synthetic low-viscosity motor oil. Keeps oil consumption low. Guaran-tees maximum performance even with long oil-change intervals. Providesthe ideal oil pressure under all operating conditions. Fast cold-star t oilingprovides excellent engine wear protection during the star t and warm-upphase.
Synthoil Race Tech GT1 10W-60For the sporty driver and for extreme field conditions.Fully synthetic low-viscosity motor oil for extreme field conditions. Highe stlubrication security, ideal oil pressure and maximum wear protectionthrough classic motorsports viscosit y. Arrive at your destination faster andsafer with maximum engine performance and power reserves.
Molygen SAE 5W-50is a specially developed high-performance, low-friction en gine oil for year-round use. The combination of synthetic base oils and advanced additivetechnology as well as the special Molygen additive ensures that the engineoil is of low viscosity and has a high shear stabilit y and reliably prevents theformation of deposits, significantly reducing frictional losses in the engineand providing the optimum pr otection from wear.
1 l 6 1360 1
1 l 12 951420
4 l 4 245120
5 l 4 1361 1
5 l 4 951520
20 l 1 1362 60 l 1 1363
205 l 1 1364
1 l 6 1150 1
5 l 4 1151 1
1 l 6 1171 1
1 l 6 8976 3
5 l 4 1172 1
5 l 4 8977 3
20 l 1 1173 60 l 1 1174 205 l 1 1175
1 l 6 1306 1
1 l 12 1855 3
1 l 12 2622 4
1 l 12 951220
4 l 4 2194 1
4 l 4 2623 4
5 l 4 1307 1
5 l 4 2877 2
5 l 4 1856 3
5 l 4 951320
20 l 1 1308 60 l 1 1309 205 l 1 1311
1 l 6 1390 1
1 l 6 8908 3
5 l 4 1391 1
5 l 4 2876 2
5 l 4 8909 3
20 l 1 1392 60 l 1 1393 205 l 1 13941000 l 1 1772
1 l 12 2542 1
4 l 4 2543 1
60 l 1 3914 205 l 1 3915
All-year oil for petrol and dieselengines. Tested safe with catalyticconverters and turbochargers.
All-year oil for petrol and dieselengines with and without pump-jettechnology. Specially developedfor vehicles with service intervalextension (German abbreviation:WIV) from Audi, Volkswagen, Seat,Skoda. Tested safe with catalyticconverters and turbochargers.
All-year oil for petrol and dieselengines. Tested safe with catalyticconverters and turbochargers.
All-year oil for petrol and dieselengines. Tested safe with catalyticconverters and turbochargers.
Specially developed for motorsports. Suitable all year for petroland diesel engines under sportyuse. Tested safe with catalyticconverters and turbochargers.
Optimum for modern passengervehicles with gasoline and dieselengines with multi-valve techno-logy and turbochargers. For pro-tection and value conservation ofthe engine during long intervalsbetween oil changes and extremeengine requirements.
For specifications and manufacturers approvals, see the oi l guide or technical data sheet.Comply with the vehicle or aggregate manufacturers instructions.
Diesel Synthoil 5W-40For the demanding diesel driver.Fully synthetic low-viscosity motor oil with excellent wear protection.Provides fast oiling of engine and turbocharger. Excellent dirt-suspendingand cleaning properties keeps the engine optimally clean. Reduces oil
consumption.
1 l 6 1340 1
5 l 4 1341 1
20 l 1 1342 60 l 1 1343 205 l 1 1344
Specially developed for dieselengines. All-year oil. Turbotested.
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB 4D PL H RO TR 20D GB F ARAB
-
7/24/2019 liqui moly5603
23/15623
Cont. Packaging Part Unit No.
Area of use
LUBRICANTSENGINE OILS 4STROKE CAR
Synthetic Technology
Top Tec 4400 5W-30Especially suitable for Renault.Latest generation high-tech low-viscosit y motor oil based on synthetic tech-nology. Prevents the build-up of harmful deposits and guar antees total en-gine power. Reduces oil thickening through particulate dr ag-in. Reduces oilconsumption. Secures the functional perfor mance of the diesel particulatefilter (DPF) while ensuring the longest possible service life. Provides fastoiling of engine and turbocharger. Provides great lubrication security alongwith ideal wear protection. Guarantees maximum perfor mance even with
long oil-change intervals (up to 30,000 km).
Top Tec 4500 5W-30Especially suitable for Mazda, Mitsubishi, Jaguar and L and Rover.Latest generation high-tech low-viscosit y motor oil based on synthetic tech-nology. Secures maximum engine per formance. Reduces fuel consumptionin one of the toughes t consumption tests in Europe (CEC-L-54-T-96/MB M111) by more than 2.5 % as compared with the specified reference oil.With outstanding wear protection. Fastest cold-start oiling during startingand minimum friction during daily driving ensure an extremely long engineservice life.
Top Tec 4600 5W-30Suitable for petrol vehicles and for diesel vehicles with and withoutparticulate filter.Modern top class low-friction engine oil for all-season use in petrol and dieselengines with or without diesel particul ate filters (DPF) and exhaust-gas
turbochargers. The combination of unconventional basic oils using synthetictechnology, together with the latest additive technology, guarantee a motoroil that provides exceptional protection against wear and reduces oil and fuelconsumption, while ensuring that the engine is immediately supplied with oil.This product allows for oil change intervals of up to 40,000 km, depending onthe manufacturers specifications.IMPORTANT:Not available for order outside Europe.
Top Tec 4100 5W-40Sulfur reduced to protect the environment and the particulate filter.Synthetic technology low-viscosity motor oil with extremely high per for-mance reserves. With outstanding wear-pr otection formula for pump-jetengines. Reduces oil thickening through particulate drag-in . For the greatestengine performance. Secures the functional performance of the dieselparticulate filter (DPF) and ensures the longes t possible service life.Guarantees maximum performance even with long oil-change intervals(up to 30,000 km).
Top Tec 4200 5W-30Can be used universally for the latest engine technologies from Audi, BMW,Mercedes-Benz and the VW Group.The high-tech low-viscosity motor oil based on s ynthetic technology, theLonglife 3 generation, takes advantage of high performance reserves toensure excellent engine cleanliness. Exceeds the stric test test requirementsdemanded by renowned manufacturers. Reduces the for mation of harmfuldeposits in direct injection petrol and diesel engines (FSI, TDI, common railetc.). Keeps oil consumption low. Secures the functional performance of thediesel particulate filter (DPF) and ensures the longes t possible service life.With improved wear-protection formula. Especially for vehicles with extremelylong oil change intervals (WIV etc.).
Top Tec 4300 5W-30Especially suitable for Peugeot, Citron, Honda, Toyota and Fiat.
High-tech low-viscosity motor oil based on synth etic technology. Securesmaximum engine performance. Reduces fuel consu mption in one of thetoughest consumption tes ts in Eu rope (CEC-L-54-T-96/MB M 111) by morethan 2.5 % as compared with the specified reference oil. Fastest cold-startoiling during starting and minimum friction during daily driving ensure anextremely long engine ser vice life. Enables long oil change intervals of upto 40,000 km.
1 l 6 3750 1
5 l 4 3751 1
20 l 1 3752 60 l 1 3753 205 l 1 3754
1 l 6 3724 1
1 l 6 2317 3
5 l 4 3729 1
5 l 4 2318 3
20 l 1 3731 60 l 1 3732 205 l 1 3733
1 l 6 3755 1
1 l 6 2315 3
5 l 4 3756 1
5 l 4 2316 3
20 l 1 3757 60 l 1 3758 205 l 1 3759
1 l 6 3700 1
1 l 6 2837 2
1 l 6 8974 3
1 l 6 2682 4
1 l 12 951020
4 l 4 2195 1
5 l 4 3701 1
5 l 4 2838 2
5 l 4 8975 3
5 l 4 2686 4 5 l 4 951120
20 l 1 3702 60 l 1 3703 205 l 1 37041000 l 1 3071
1 l 6 3706 1
1 l 6 2839 2
1 l 6 8972 3
1 l 6 2691 4
4 l 4 3715 1
5 l 4 3707 1
5 l 4 2849 2
5 l 4 8973 3
5 l 4 2693 4
20 l 1 3708 60 l 1 3709 205 l 1 3711
1 l 6 3740 1
1 l 6 2861 2
1 l 6 2323 3
5 l 4 3741 1
5 l 4 2862 2
5 l 4 2324 3
20 l 1 3742 60 l 1 3743 205 l 1 3744
All-year oil for petrol and dieselengines including common railtechnology. Especially suitable forgas-powered vehicles (CNG/LPG)and vehicles with diesel particu-late filters (DPF) al so for retro-fits. Tested safe with catalyticconverters and turbochargers.
All-year oil for petrol and dieselengines including common railtechnology. Especially suitable forgas-powered vehicles (CNG/LPG)and vehicles with diesel particu-late filters (DPF) al so for retro-fits. Tested safe with catalyticconverters and turbochargers.
Optimum for modern petrol anddiesel engines with multi-valvetechnology, Valvetronic andturbocharging (with or without
charge air cooling). Especiallysuitable where there are longintervals between oil changes andheavy duty engine requirements.Also suitable for gas-poweredvehicles (CNG/LPG). Tested safewith catalytic converters andturbochargers.
All-year oil for petrol and dieselengines including common railand pump-jet technology. Espe-cially suitable for gas-poweredvehicles (CNG/LPG) and vehicleswith diesel particulate filters(DPF) also for retrofits. Testedsafe with catalytic converters andturbochargers.
All-year oil for petrol and dieselengines with FSI, common railand pump-jet technology. Espe-cially suitable for vehicles withdiesel particulate filters (DPF) also for retrofits. Tested safe withcatalytic converters and turbo-chargers.
All-year oil for petrol and dieselengines including common railtechnology. Especially suitable forgas-powered vehicles (CNG/LPG)and vehicles with diesel particu-late filters (DPF) al so for retro-fits. Tested safe with catalyticconverters and turbochargers.
For specifications and manufacturers approvals, see the oil guide or technical data sheet.Comply with the vehicle or aggregate manufacturers instructions.
Leichtlauf High Tech 5W-40Suitable for petrol vehicles and for diesel vehicles without particulate filter.
Modern top class low-friction eng ine oil for all-season use in petrol anddiesel engines without diesel particulate filters (DPF). The combination ofinnovative base oils based on synthesis technology and the latest additivetechnology guarantees an engine oil that reduces oil and fuel consumptionand that ensures fast lubrication of the engine. Depending on the m anufac-turer instructions, oil change intervals of up to 40,00 0 km are possible.
1 l 6 3863 1
1 l 6 232720
4 l 4 2595 1
5 l 4 3864 1
5 l 4 232820
20 l 1 3867 60 l 1 3868
205 l 1 3869
Ideally suited for modern petroland diesel engines with multi-valve technology, turbochargerand with or without charge aircooling. Especially suitable wherethere are long intervals betweenchanges and heavy duty enginerequirements.
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB 4D PL H RO TR 20D GB F ARAB
-
7/24/2019 liqui moly5603
24/15624
Cont. Packaging Part Unit No.
Area of use
ENGINE OILS 4STROKE CAR
Synthetic Technology
Special Tec F 5W-30Especially suitable for Ford vehicles.Synthetic technology low-viscosity motor oil. It safely prevents deposits, fea-tures extreme shear stability, reduces fr iction losses in the engine and of-
fers excellent protection against wear and tear. Especially recommended forlong oil change intervals and high engine performance requirements.
1 l 6 3852 1
1 l 6 2325 3
5 l 4 3853 1
5 l 4 2326 3 20 l 1 3854 60 l 1 3856 205 l 1 3857
The latest Ford specification(WSS-M2C 913 C) primarily appliesto various vehicle types from year
of manufacture 2009. Backwardscompatible and can be used inolder Ford vehicles from 7/1998without hesitation as well. Be-sides, a lubricant meeting thisspecification is demanded bymanufacturers such as LandRover, Rover/MG, Jaguar, Mazdaand Citron for use in differentvehicle types.Not suited for VW vehicles withservice interval extension!
Special Tec 5W-30Especially suitable for Ford vehicles up to year of construction 2008.Synthetic technology low-viscosity motor oil. Provides a stable lubr icatingfilm. Reduces fuel consumption in one of the toughest consumption test s inEurope (CEC-L-54-T-96/MB M 111) by more than 2.5% as compared with thespecified reference oil. Prevents build-up of harmful deposits. For vehicleswith tried and tested engine technology.
1 l 6 1163 1
1 l 12 950820
5 l 4 1164 1
5 l 4 2879 2
5 l 4 8983 3
5 l 4 950920
20 l 1 118160 l 1 1166
205 l 1 1165
All-year oil for petrol and dieselengines. Especially suitable forvehicles made by Ford starting7/98 and for various models madeby Land Rover, Rover/MG, Jaguarand Mazda. Tested safe with cata-
lytic converters and turbochargers.
For specifications and manufacturers approvals, see the oi l guide or technical data sheet.Comply with the vehicle or aggregate manufacturers instructions.
Longtime High Tech 5W-30With advanced wear-protection technology.Synthetic technology low-viscosity motor oil with extremely high per formance
reserves. Guarantees maximum performance even with long oil-changeintervals (up to 30,00 0 km). Excellent dirt-suspending and cleaning propertieskeeps the engine optimally clean. Secures the functional performance of thediesel particulate filter (DPF) while ensuring the longest possible serv ice life.Exceeds the highest test requirements demanded by renowned manufacturers.
Special Tec LR 5W-20Especially suitable for Jaguar and Land Rover.Low-friction engine oil, which provides excellent protection against wear, re-duces oil and fuel consumption, keeps the engine clean and ensures its fast lu-brication.
1 l 6 1136 1
1 l 6 8978 3
1 l 12 950620 4 l 4 1144 1
5 l 4 1137 1
5 l 4 8981 3
5 l 4 950720
20 l 1 1138 60 l 1 1139 205 l 1 1140
205 l 1 1783
All-year oil for petrol and dieselengines including common rail
technology. Especially suitablefor vehicles with diesel particu-late filters (DPF) als o for retro-fits. Tested safe with catalyticconverters and turbochargers.
Specially tailored to the highrequirements set by Jaguar andLand Rover for their vehicles.It is suitable for long oil changeintervals and high engine loads.
Special Tec LL 5W-30Especially suitable for Opel vehicles.High-tech low-viscosity motor oil based on s ynthetic technology. With ad-vanced wear-protection formula. Fastest cold-start oiling during startingand minimum friction during daily driving ensure an extremely long engineservice life. Provides the ideal oil pressur e under all operating conditions.Keeps oil consumption low. Exceeds the strict test requirements demandedby renowned manufacturers.
Special Tec F Eco 5W-20Low-friction motor oil based on synthetic technology. Deposits are reliablyprevented, superior lubrication reliability ensured and high fu el economymade possible. In regard to wear resistance the requirements of the olderFord standard WSS-M2C913- C are met and even exceeded in some aspects.Ford recommends its use for all eng ines for which oils of specificationsWSS-M2C913-B, WSS-M2C913-C or WSS-M2C925-B were currently re-quired.
1 l 6 1192 1
1 l 6 2447 3
4 l 4 233920
5 l 4 1193 1
5 l 4 2448 3
20 l 1 1194 60 l 1 1195 205 l 1 1196
1 l 6 38401
5 l 4 3841 1
20 l 1 3842 60 l 1 3843 205 l 1 3844
All-year oil for petrol and dieselengines. Ideal for Opel vehiclesup to model year 2010. Tested safewith catalytic converters andturbochargers.
The specifications from FordCompany (WSS-M2C948-B) arerequired for Ford petrol engineswith the exception of (Ford Ka(08/2008), Focus ST (2004.75 with2.5 l Duratec-ST (VI5) engine undFocus RS (2004.75 with 2.5 l Du-ratec-ST (VI5) engine). The motoroil of the standard WSS-M2C948-B is stipulated for all routineservices, warranty, recall andwarranty service activities on1.0 l 3-cylinder EcoBoost engines.In addition, it is ful ly compatiblewith older versions.
1D GB I E P 2D DK FIN N S 3D NL F GR ARAB 20D GB F ARAB
Top Tec 4700 5