lit01311 bending solutions
TRANSCRIPT
FOR YOUR INSPIRATION! Fabricating jobs often require the bending of parts. Typically, fabricators use press brakes for these operations. Sometimes using a press brake seems like overkill, especially on smaller parts. A press brake adds a secondary operation and cost to a job that really may not need it. Bending parts by hand could help lower manufacturing costs and speed time to delivery. This folio shows actual customer parts bending solutions that were developed by Mate. We hope they inspire you to do more with your punch press.
© Mate Precision Tooling Inc. All rights reserved. 2
EasyBend™ for manual bending eliminates press brake operation and allows shipping in flat condition.
EasyBendTM Solutions
6 © Mate Precision Tooling Inc. All rights reserved.
EasyBend Down
EasyBend Up
EasyBendTM Solutions
Special Solution in thick material: EasyBend™ can help make sharp and straight bends.
7 © Mate Precision Tooling Inc. All rights reserved.
EasySnapTM Solutions
- V-line incision on top and bottom of sheet
- Ideal for separation of parts - Microjoint solution for smoother
edges 8 © Mate Precision Tooling Inc. All rights reserved.
Bending lines
EasySnap lines
EasySnap can solve bending problems … without burrs
V-die for bending
EasySnapTM Solutions
9 © Mate Precision Tooling Inc. All rights reserved.
Short bends normally made on the press brake are now
made possible with EasySnap
EasySnapTM Solutions
10 © Mate Precision Tooling Inc. All rights reserved.