lmenim2100-00 wg series · 2014. 9. 10. · c. en 13445-3, part 3 for unfired pressure vessels 23....

Experience in Motion

TECHNICAL BULLETINLPC Compact Actuator SeriesFCD LFENTB0002-00-A4 - 07/14

2

LPC Compact Actuator Series FCD LFENTB0002-00-A4 – 07/14

Contents

LPC Series Compact Actuator Specifications ..................................4

Actuator Selection Table ..................................................................6

Actuator Selection Guidance ............................................................6

1 Scope .......................................................................................6

2 General Definitions/Terms Used ..............................................6

3 Inputs for Sizing Pneumatic Scotch Yoke Actuators ................7

4 Selection ..................................................................................9

5 Fail Open/Fail Close Configuration .........................................10

6 Performance Data ..................................................................11

7 Dimensions ............................................................................11

8 Disclaimer ..............................................................................11

Torque Charts – Single Acting CW/CCW – Imperial and Metric ................................................................. 12–13

Torque Charts – Double Acting – Imperial and Metric ...................14

Dimensional Data and Weights – Single Acting ...................... 15–18

Dimensional Data and Weights – Double Acting ..................... 19–20

Mounting Interface Dimensions.....................................................21

Service Kits ....................................................................................22

3flowserve.com


Tables

Table 1: Torque Table – LPC-05A – Single Acting Spring Return – Fail Close/Fail Open – Symmetric ..................................................12

Table 2: Torque Table – LPC-10A – Single Acting Spring Return – Fail Close/Fail Open – Symmetric ..................................................13

Table 3: Torque Table – LPC-05A – Double Acting – Symmetric ...14

Table 4: Torque Table – LPC-10A – Double Acting – Symmetric ...14

Table 5: Dimensions & Weights – LPC-05 – Sym/Cant – Single Acting – Fail Close/Fail Open ...........16

Table 6: Dimensions & Weights – LPC-10 – Sym/Cant – Single Acting – Fail Close/Fail Open .... 17–18

Table 7: Dimensions & Weights – LPC-05 – Sym/Cant – Double Acting ............................................19

Table 8: Dimensions & Weights – LPC-10 – Sym/Cant – Double Acting .............................................20

Figures

Figure 1: Actuator OPEN (by instr. air) Torque Curve: Single Acting Spring Return – Fail Close (CW) ................................7

Figure 2: Actuator CLOSE (by spring) Torque Curve: Single Acting Spring Return – Fail Close (CW) ................................8

Figure 3: Single Acting Actuator Configuration: Fail Close – Fail Clockwise .............................................................10

Figure 4: Single Acting Actuator Configuration: Fail Open – Fail Counterclockwise ..................................................10

Figure 5: Double Acting Actuator Configuration – Close Position ................................................................................10

Figure 6: Double Acting Actuator Configuration – Open Position ................................................................................11

Figure 7: Dimensional Data – Single Acting – Sym/Cant – Fail Close ...........................................15

Figure 8: Dimensional Data – Single Acting – Sym/Cant – Fail Open ...........................................15

Figure 9: Dimensional Data – Double Acting – Sym/Cant .............................................................20

Figure 10: LPC Actuators Coupling Details – Symmetric/Canted .........................................................................20

Figure 11: LPC Actuator Spring Return and Double Acting – Exploded Views ...............................................................23

4


1. The LPC range of Limitorque Pneumatic Actuators is a robust, lightweight modular Scotch yoke design, available in both spring return and double acting configurations. It is suitable for actuating ball, butterfly and plug valves or any other quarter-turn application.

2. LPC Compact actuators deliver up to 1600 Nm* (1180 ft-lb) of precisely controlled torque. The LPC product range is complementary to the already available range of Limitorque LPS heavy-duty pneumatic Scotch yoke actuators. A similar design philosophy to the one adopted for the large heavy-duty LPS actuators has been applied to the new LPC range, bringing enhanced performance and high reliability.

3. The LPC is available in a selection of standard as well as in different and special material executions, upon request.

4. LPC actuators are complemented by a comprehensive range of control systems, including ESD, PST and Quick Closing options. A suite of standard controls systems is available for short delivery, but the Limitorque engineering team can design custom solutions for the largest and most complex customer requirements.

5. To complete the actuation package, LPC actuators are available with accessories such, lockout modules and manual overrides. Limitorque provides engineering design services for mounting hardware, ensuring that your actuation solution is ready to handle the toughest challenges.

6. The LPC actuator is designed to provide 25 years of operational life when installed, used and maintained in accordance with product instructions and documentation. In order to achieve this industry-leading design life, in-field maintenance is prescribed to be performed every five years of operation. For high-cycle applications, such as control valve operation, more frequent maintenance of replaceable wear surfaces, as outlined in EN 15714, may be required.

7. Suitable for use in on/off, modulating and control valve application in general service, protective service and safety applications such as ESD or HIPPS.

8. The LPC is provided with square output shaft as described in “Mounting Interface Dimensions” paragraph of this Technical Bulletin. It is also available with valve adaptor interface in compliance with ISO 5211 or MSS SP-101, upon request as an option.

9. Manufactured and tested in compliance with EN 15714-3 and ISO 12490.

10. Spring components are designed in compliance with EN 13906-1.

11. Surface coating and corrosion protection in compliance with ISO 12944-2 up to and including C5-M if requested.

12. Environmental resistance has been certified to meet or exceed the requirements of IEC 60529, including IP66/66M and IP67/67M.

13. The LPC actuator is suitable for use in Safety Integrated Systems in accordance with IEC 61508 up to and including SIL Level 3.

14. The actuator accessories in the LPC series meet the requirements of ISO 5599-2.

15. LPC actuators are available in accordance with ATEX 94/9/EC Ex II 2GD c IIC T6, as it relates to mechanical actuators.

16. Actuators are available in compliance with NACE specification MR0175 for sour gas applications, upon request

17. Shaft-driven accessories/devices are mounted to VDE VDI 3845 NAMUR compliant mounting locations, by means of an adaptor available upon request as an option.

18. The actuator is manufactured and tested in compliance with an ISO 9001 Quality Assurance Program.

19. Integral travel stops provide 90°±5° of stroke adjustment and are designed for the MAWP of the actuator up to 12 barg (174 PSIG).

20. The materials of construction and seals of the LPC family of actuators are available for a wide range of service temperatures, including Tropical, Arid, Temperate, Cold and Polar regions in accordance with IEC 60721.

21. The pneumatic cylinder design features proven and reliable external tie rods suitable for continuous duty service at the maximum rated pressure. Wear and corrosion protection of all components is ensured with suitable treatments and coatings. ENP (electroless nickel plating) is the standard for the internal surface of the pneumatic cylinder to ensure complete sealing and superior corrosion resistance. Other coatings for the internal surface of the cylinder are available upon request. The LPC actuator cylinders are capable of being independently tested prior to assembly.

LPC Series Compact Actuator Specifications

* Contact factory for larger sizes and higher output torques

5flowserve.com


22. Pressure modules are available upon request in compliance with: a. Pressure Equipment Directive 97/23/EC b. ASME BPVC Sec. VIII Div. 1 c. EN 13445-3, Part 3 for Unfired Pressure Vessels

23. All actuators and modules meet acceptance criteria defined by Flowserve test specifications.

24. The LPC is available with either a symmetric or canted Scotch yoke. Scotch yoke cants are available from 1˚ to 8˚ upon request, pending on application.

25. All modules align and mate with close-tolerance machined flanges with no exposed threaded connections.

26. The high-strength, heat-treated alloy steel guide bar is hard chrome plated for wear and corrosion protection.

27. The piston rod is detachable from the torque module without special tools and does not require module disassembly.

28. Pressure seals utilize O-rings, quad-rings or V-rings as appropriate to eliminate environmental ingress. No gaskets are used in pressurized regions of the actuator.

29. The push-to-compress springs are safely enclosed by tie rods and positively retained on the torque module under all load conditions. Springs are designed in accordance with EN 13906-1 and combined and positioned to eliminate potential contact with the container or each other in the case of multiple springs. Springs are shot peened for maximum life and are painted and permanently lubricated and coated prior to assembly to eliminate corrosion.

30. In the LPC single acting execution, the spring is located inside the pneumatic cylinder, like an integral solution.

31. The spring and spring guide are self-centered and bearing guided within the spring module. The spring rod is guided in a self-lubricating bearing and connected to the torque module. Installation and removal of the spring module does not require special tools.

32. Maintenance-free, self-lubricating bearings are used to minimize friction of the yoke, yoke pins and roller bearing in the yoke slots for low friction and to minimize contact stresses in order to provide the longest possible service life.

33. Retention of the yoke pin is by a retaining washer to permit easy removal of the yoke pin while the actuator is mounted on the valve. No special tools are required.

6


1. ScopeThis section provides guidance for the selection of the proper LPC actuator to suit specific operational requirements. A basic understanding of Scotch yoke actuators and the typical applications in which they are used is provided in order to assist in selection of the most suitable actuator. While the selection procedures and product data contained herein cover many applications, due to the

Actuator Selection Guidance

2. General Definitions/Terms Used

wide range of applications in which the LPC actuators can be used, this information will not cover every set of operational requirements. The Limitorque applications team is always available to assess specific applications and help with selection of the appropriate LPC actuators. Please contact your local office for assistance.

Quarter-turn A device that rotates by a nominal 90°. LPC series actuators rotate ± 5° more than the nominal 90°.

PositionThe degree of rotation describing an actuator’s current location, the zero being referred from complete counterclockwise position of the yoke. The mid-position of the actuator is at 45° and 90° being the end of clockwise stroke.

CW Clockwise rotation.

CCW Counterclockwise rotation.

Stroke A continuous, 90° rotation of a quarter-turn actuator.

CycleTwo strokes, one clockwise (CW) rotation and other counterclockwise (CCW) rotation, constitute one cycle of operation of the actuator.

Actuator Selection Table

Seals Material

Code Material Temperature RangeClimate Classification according to IEC60721

B Buna Std Temp: -29°C to +100°C (-20°F to 212°F)Tropical & Arid

V Viton Hi Temp: up to +160°C (320°F)

S Silicon Low Temp: down to -40°C (-40°F) Temperate

Z Other Special Applications: Consult Factory Cold & Polar

4-4

4-5

DD - 2 CYLINDERS TANDEM

D2 - 2 CYLINDER D.A.

3-2

3-3

2-4

2-5

3-1

4-2

4-3

3-4

3-5

4-1

Z - SPECIALSEAL

MAT

ERIA

L

2-2

2-3

FC - FAIL CLOSE

FO - FAIL OPEN

2-1

1-1

1-2

1-3

1-4

1-5

SIN

GLE

ACTI

NG

DOU

BLE

ACTI

NG

SPRI

NG

CAN

SIZ

E

D1 - 1 CYLINDER D.A.

LHS ACTUATOR

LHS SELECTION TABLE

65 B - BUNA

V - VITON

YOKE

TYP

E

S - SILICON

A

B

C

100

110

75

85

80

40

280

90

200

160

130

260

220

240

15

180

example model n°

HOU

SIN

G SI

ZE

HYDR

AULI

C CY

LIN

DER

SIZE

LHS - 15X FC 1-1- 090Y -

20

25

30

35

7flowserve.com


3. Inputs for Sizing Pneumatic Scotch Yoke Actuators

Due to the Scotch yoke mechanism, LPC actuators have a particular U-shaped output torque curve, whether powered by a fixed supply pressure or the spring.

For a proper actuator model selection, the safety factors between actuator output torque and valve torque requirement shall be calculated at least in six points along the valve stroke. In addition, a final check is necessary to guarantee that actuator Maximum Output Torque does not exceed valve Maximum Allowable Stem Torque (MAST).

Safety Factor

A factor multiplied by the valve’s basic required torque value to increase the amount of torque required to meet safety requirements in a given application. When the valve’s torque requirements are not known with certainty, or due to other application demands, use of a safety factor is required in the selection process in order to meet the worst-case torque requirements.

Pneumatic Break TorqueOutput torque when the actuator is in the position to start the pressure stroke. [The torque required to initiate the pressure stroke.]

Pneumatic End TorqueOutput torque at the end limit of the pressure stroke. [The torque required to seat the valve at the end of the pressure stroke.]

Run TorqueThe output torque recorded while the actuator is in the mid-position of the pressure stroke (45°). For symmetrical yoke double-acting actuators, this is the minimum torque output obtained during the complete stroke.

Spring Break TorqueThe output torque when the actuator is in the position to start the spring stroke. [The torque required to initiate the spring stroke.] The spring is fully compressed at this position and generates the maximum spring force.

Spring End TorqueThe output torque when the actuator has reached the end limit of spring stroke. [The torque required to seat the valve at the end of the spring stroke.] The spring is fully extended at this position and generates the minimum spring force.

Minimum TorqueThe output torque at an intermediate position of the spring stroke, where the output torque of the actuator is at its lowest value.

MOP Maximum operating pressure of an actuator.

Figure 1: Actuator OPEN (by instr. air) Torque Curve: Single Acting Spring Return – Fail Close (CW)

8


Figure 2: Actuator CLOSE (by spring) Torque Curve: Single Acting Spring Return – Fail Close (CW)

Note: Detailed Output Torque graphs covering the full valve stroke for both Single Acting Fail Open (CCW) and Double Acting actuators are available upon request.

The minimum set of parameters and features necessary for an optimized actuator selection:

• Valve torques, or at least the unseating torque (BTO), and valve MAST

• Type of actuator: • Single Acting/Spring Return: Fail Safe Close (CW)

or Fail Safe Open (CCW)• Double Acting configuration for Fail Last

or Fail As Is

• Minimum, Normal and Maximum Pneumatic Supply Pressure to the actuator

• Safety Factors requested by the project or by a specific application

• Working Temperature range

• Open/Close stroking times

• Additional options (manual override, control panel, limit switch box, positioner, …)

Definitions:BTO = Break to Open torque BTC = Break to Close torqueRTO = Running to Open torque RTC = Running to Close torqueETO = End to Open torque ETC = End to Close torqueMAST = Maximum Allowable Stem Torque SF = Safety Factor

9flowserve.com


4. Selection The most common application of clockwise rotation to close a valve is considered for these selection examples.

The start to open or pneumatic break torque of the valve (BTO) is considered the maximum required torque by the valve. An actuator shall exceed the valve torque requirement at all positions of the rotation. The start/end and minimum torque output for a double- acting actuator are given in the charts. For spring-return actuators, the spring and the pneumatic strokes’ lowest start/minimum/end output torque values are given in the charts.

4.1. Double-Acting Actuator Selection

4.1.1 Select the operating pressure column that is equal to or less than the known minimum operating pressure. Look up the start/end and minimum torque values, under the selected pressure column, that exceed the valve’s maximum requirements.

4.1.2 Locate the actuator model corresponding to the selection.

4.1.3 Refer to the performance data table to ensure the maximum supply pressure to the actuator does not exceed the MOP of the actuator.

4.1.4 If the maximum supply pressure exceeds the MOP, it may be required to use a pressure-regulating device at the inlet to the actuator or an alternate actuator model may be selected that is rated for a higher MOP.

4.2. Spring-Return, Fail-CW Actuator Selection

4.2.1 From the spring torque column, locate the spring end torque value that exceeds the valve’s maximum seating torque requirement.

4.2.2 Moving to the right along that row, locate the column corre-sponding to the minimum operating pressure available to the actuator and read the pressure stroke start torque.

4.2.3 The pressure stroke start torque at the minimum pressure must be higher than the valve’s unseating torque requirement.

4.2.4 The pneumatic end torque must exceed the valve’s torque requirement at this stroke end position to open the valve fully in the CCW direction.

4.2.5 Refer to the performance data table to ensure the maximum supply pressure to the actuator does not exceed the MOP of the actuator.


4.3. Spring-Return, Fail-CCW Actuator Selection

4.3.1 From the spring torque column, locate the spring start torque value that exceeds the valve’s maximum unseating torque requirement (Fail-Open application).

4.3.2 Moving to the right along that row, locate the column corre-sponding to the minimum operating pressure available to the actuator and read the pressure stroke end torque.

4.3.3 The pneumatic end torque at the minimum available pressure must be higher than the valve’s seating torque requirement (torque to fully close the valve).

4.3.4 The pneumatic start torque must exceed the valve’s torque requirement at this position to close the valve in the CW direction.

4.3.5 Refer to the performance data table to ensure the maximum

supply pressure to the actuator does not exceed the MOP of the actuator.


10


5. Fail Open/Fail Close Configuration

The LPC actuator is designed for work in both single acting (fail open and fail close) and double acting configurations:

Figure 3: Single Acting Actuator Configuration: Fail Close – Fail Clockwise

Figure 4: Single Acting Actuator Configuration: Fail Open – Fail Counterclockwise

Figure 5: Double Acting Actuator Configuration – Close Position

11flowserve.com


Figure 6: Double Acting Actuator Configuration – Open Position

6. Performance DataThe following performance data chart provides the following:

• Maximum Operating Torque (MOT)

• Maximum Operating Pressure (MOP) that can be applied to the actuator

• Maximum allowable working pressure (MAWP) that can be applied to the static actuator at the stroke end (restricted by the travel stops)

• Swept Volume required to stroke the actuator

Note: Provided performance data may be subject to variations due to continuous improvement of LPC products. For latest data, please contact Flowserve and/or refer to technical documentation transmitted along with the quotes or job documentation.

7. DimensionsThe following Dimensions & Weight tables include main external dimensions referred to the relevant pictures included in each section. The overall lengths, the weights, the mounting dimension details, the interface dimensions and the tolerances are included as a guide for actuator selection.

The stated dimensions and weights include the actuators, dimensions only, without any optional features, like the spool pieces, manual overrides, control panels, etc.

Note: Provided dimensional data and weights may be subject to variations due to continuous improvement of LPC products. For latest data, please contact Flowserve and/or refer to technical documentation transmitted along with the quotes or job documentation.

8. Disclaimer This publication is presented for information purposes only, with an effort to ensure the accuracy, the contents are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. The right to modify or improve the designs or specifications of our products at any time without notice is reserved.

12


Torque Charts – Single Acting CW/CCW – Imperial and Metric Table 1: Torque Table – LPC-05A – Single Acting Spring Return – Fail Close/Fail Open – Symmetric

MOT (Maximum Operating Torque): 500 Nm (369 ft-lb) MAWP (Maximum Allowable Working Pressure): 12 barg (174 PSIG)

barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG) barg (PSIG)

2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)

Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) barg (PSIG) L

start 59 (44) 48 (35) 63 (46) 78 (58) 93 (69) 107 (79) 122 (90) 137 (101) 166 (122) 225 (166) 255 (188) 314 (232)run 25 (18) 18 (13) 27 (20) 35 (26) 43 (32) 52 (38) 60 (44) 65 (48) 85 (63) 118 (87) 135 (100) 168 (124)end 33 (24) 19 (14) 35 (26) 50 (37) 66 (49) 81 (60) 97 (72) 113 (83) 144 (106) 207 (153) 238 (176) 301 (222)start 57 (42) 73 (54) 96 (71) 120 (89) 143 (105) 166 (122) 189 (139) 212 (156) 235 (173) 281 (207) 373 (275) 419 (309)run 24 (18) 32 (24) 46 (34) 59 (44) 72 (53) 85 (63) 98 (72) 111 (82) 124 (91) 150 (111) 201 (148) 227 (167)end 31 (23) 45 (33) 70 (52) 94 (69) 119 (88) 143 (105) 168 (124) 192 (142) 217 (160) 266 (196) 364 (268) 412 (304)start 55 (41) 122 (90) 155 (114) 189 (139) 222 (164) 255 (188) 288 (212) 321 (237) 355 (262) 421 (311)run 23 (17) 60 (44) 79 (58) 97 (72) 116 (86) 135 (100) 154 (114) 172 (127) 191 (141) 228 (168)end 29 (21) 97 (72) 132 (97) 168 (124) 203 (150) 238 (176) 273 (201) 309 (228) 344 (254) 414 (305)start 52 (38) 180 (133) 225 (166) 270 (199) 315 (232) 361 (266) 406 (299) 451 (333) 496 (366)run 21 (15) 93 (69) 118 (87) 143 (105) 169 (125) 194 (143) 220 (162) 245 (181) 271 (200)end 26 (19) 158 (117) 206 (152) 254 (187) 302 (223) 350 (258) 398 (294) 446 (329) 494 (364)start 50 (37) 246 (181) 305 (225) 364 (268) 423 (312) 482 (356)run 20 (15) 130 (96) 163 (120) 196 (145) 230 (170) 263 (194)end 23 (17) 229 (169) 291 (215) 354 (261) 417 (308) 479 (353)start 104 (77) 94 (69) 108 (80) 138 (102) 197 (145) 226 (167) 286 (211)run 45 (33) 37 (27) 46 (34) 62 (46) 96 (71) 113 (83) 146 (108)end 60 (44) 43 (32) 59 (44) 90 (66) 153 (113) 184 (136) 247 (182)start 103 (76) 91 (67) 114 (84) 137 (101) 160 (118) 183 (135) 206 (152) 252 (186) 345 (254) 391 (288) 483 (356)run 44 (32) 35 (26) 49 (36) 64 (47) 75 (55) 88 (65) 101 (74) 127 (94) 179 (132) 205 (151) 257 (190)end 58 (43) 41 (30) 65 (48) 90 (66) 114 (84) 139 (103) 163 (120) 212 (156) 310 (229) 359 (265) 457 (337)start 101 (74) 94 (69) 127 (94) 160 (118) 193 (142) 226 (167) 260 (192) 293 (216) 326 (240) 393 (290)run 43 (32) 37 (27) 56 (41) 75 (55) 94 (69) 113 (83) 131 (97) 150 (111) 169 (125) 206 (152)end 56 (41) 43 (32) 79 (58) 114 (84) 149 (110) 184 (136) 220 (162) 255 (188) 290 (214) 361 (266)start 98 (72) 151 (111) 196 (145) 242 (178) 287 (212) 332 (245) 377 (278) 422 (311) 468 (345)run 41 (30) 70 (52) 96 (71) 121 (89) 147 (108) 172 (127) 197 (145) 223 (164) 248 (183)end 54 (40) 105 (77) 153 (113) 200 (148) 248 (183) 296 (218) 344 (254) 392 (289) 440 (325)start 95 (70) 218 (161) 277 (204) 336 (248) 395 (291) 454 (335)run 40 (30) 107 (79) 141 (104) 174 (128) 207 (153) 240 (177)end 51 (38) 175 (129) 238 (176) 300 (221) 363 (268) 426 (314)start 161 (119) 119 (88) 142 (105) 165 (122) 212 (156) 304 (224) 350 (258) 442 (326)run 71 (52) 43 (32) 57 (42) 71 (52) 97 (72) 149 (110) 175 (129) 227 (167)end 98 (72) 45 (33) 70 (52) 94 (69) 143 (105) 241 (178) 290 (214) 388 (286)start 159 (117) 119 (88) 152 (112) 186 (137) 219 (162) 252 (186) 285 (210) 352 (260) 485 (358)run 70 (52) 43 (32) 63 (46) 82 (60) 101 (74) 120 (89) 139 (103) 176 (130) 251 (185)end 96 (71) 45 (33) 80 (59) 116 (86) 151 (111) 186 (137) 221 (163) 292 (215) 433 (319)start 157 (116) 155 (114) 200 (148) 246 (181) 291 (215) 336 (248) 382 (282) 427 (315)run 68 (50) 65 (48) 91 (67) 117 (86) 142 (105) 168 (124) 193 (142) 219 (162)end 93 (69) 84 (62) 132 (97) 180 (133) 228 (168) 276 (204) 324 (239) 372 (274)start 154 (114) 177 (131) 236 (174) 295 (218) 354 (261) 413 (305) 472 (348)run 67 (49) 77 (57) 111 (82) 144 (106) 178 (131) 211 (156) 244 (180)end 90 (66) 106 (78) 169 (125) 232 (171) 294 (217) 357 (263) 419 (309)start 206 (152) 156 (115) 190 (140) 223 (164) 256 (189) 322 (237) 455 (336)run 90 (66) 58 (43) 77 (57) 97 (72) 116 (86) 154 (114) 228 (168)end 124 (91) 61 (45) 97 (72) 132 (97) 167 (123) 238 (176) 378 (279)start 203 (150) 171 (126) 217 (160) 262 (193) 307 (226) 352 (260) 398 (294) 488 (360)run 88 (65) 67 (49) 93 (69) 119 (88) 145 (107) 170 (125) 196 (145) 247 (182)end 121 (89) 77 (57) 125 (92) 173 (128) 221 (163) 269 (198) 317 (234) 413 (305)start 200 (148) 207 (153) 266 (196) 325 (240) 384 (283) 443 (327)run 87 (64) 87 (64) 121 (89) 155 (114) 188 (139) 221 (163)end 118 (87) 115 (85) 177 (131) 240 (177) 303 (223) 365 (269)start 267 (197) 216 (159) 283 (209) 416 (307) 482 (356)run 117 (86) 83 (61) 122 (90) 198 (146) 235 (173)end 162 (119) 95 (70) 166 (122) 306 (226) 377 (278)start 265 (195) 222 (164) 267 (197) 313 (231) 358 (264) 448 (330)run 116 (86) 87 (64) 113 (83) 139 (103) 165 (122) 216 (159)end 159 (117) 101 (74) 149 (110) 197 (145) 245 (181) 341 (252)start 262 (193) 226 (167) 285 (210) 344 (254) 403 (297) 462 (341)run 114 (84) 89 (66) 123 (91) 157 (116) 191 (141) 224 (165)end 156 (115) 105 (77) 168 (124) 231 (170) 293 (216) 356 (263)start 315 (232) 231 (170) 276 (204) 321 (237) 411 (303)run 139 (103) 85 (63) 112 (83) 138 (102) 190 (140)end 194 (143) 90 (66) 138 (102) 186 (137) 282 (208)start 312 (230) 248 (183) 307 (226) 366 (270) 425 (313) 484 (357)run 138 (102) 95 (70) 130 (96) 164 (121) 198 (146) 231 (170)end 192 (142) 109 (80) 172 (127) 234 (173) 297 (219) 360 (266)


2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)


start 206 (152) 167 (123) 198 (146) 228 (168) 290 (214) 413 (304) 474 (350) 597 (440)run 89 (66) 63 (47) 82 (60) 99 (73) 135 (99) 204 (150) 239 (176) 308 (227)end 122 (90) 71 (52) 103 (76) 136 (100) 201 (148) 331 (244) 397 (292) 527 (388)start 203 (150) 167 (123) 211 (156) 255 (188) 299 (221) 344 (253) 388 (286) 476 (351) 653 (482) 742 (547) 919 (677)run 88 (65) 63 (47) 89 (66) 115 (85) 140 (103) 165 (122) 190 (140) 240 (177) 339 (250) 389 (287) 488 (360)end 119 (88) 71 (52) 118 (87) 164 (121) 211 (156) 258 (190) 305 (225) 399 (294) 586 (432) 680 (502) 868 (640)start 200 (147) 155 (114) 215 (159) 275 (203) 336 (247) 396 (292) 456 (336) 516 (381) 576 (425) 697 (514) 937 (691) 1058 (780) 1299 (958)run 86 (63) 56 (41) 92 (68) 126 (93) 160 (118) 194 (143) 228 (168) 262 (193) 296 (218) 364 (268) 499 (368) 567 (418) 702 (518)end 116 (85) 58 (43) 122 (90) 186 (137) 250 (184) 313 (231) 377 (278) 441 (325) 505 (372) 632 (466) 888 (655) 1015 (749) 1271 (937)start 196 (145) 243 (180) 322 (237) 401 (295) 479 (353) 558 (411) 637 (469) 715 (527) 794 (585) 951 (701) 1265 (933) 1423 (1049)run 84 (62) 108 (80) 153 (113) 197 (145) 241 (178) 286 (211) 330 (243) 374 (276) 418 (308) 507 (374) 684 (504) 772 (569)end 112 (82) 152 (112) 235 (173) 319 (235) 402 (296) 485 (358) 569 (419) 652 (481) 735 (542) 902 (665) 1235 (911) 1402 (1034)start 192 (142) 344 (253) 443 (327) 543 (400) 642 (474) 742 (547) 841 (620) 941 (694) 1040 (767) 1239 (914)run 81 (60) 165 (122) 221 (163) 277 (204) 333 (246) 389 (287) 445 (328) 501 (369) 557 (411) 669 (493)end 107 (79) 258 (190) 364 (268) 469 (346) 575 (424) 680 (502) 786 (579) 891 (657) 997 (735) 1208 (891)start 187 (138) 456 (336) 579 (427) 701 (517) 824 (608) 947 (698) 1070 (789) 1193 (880) 1316 (970) 1561 (1151)run 79 (58) 228 (168) 297 (219) 366 (270) 435 (321) 504 (372) 574 (423) 643 (474) 712 (525) 850 (627)end 102 (76) 377 (278) 507 (374) 637 (470) 768 (566) 898 (662) 1028 (758) 1158 (854) 1289 (950) 1549 (1142)start 182 (134) 580 (427) 728 (537) 877 (647) 1025 (756) 1174 (866) 1323 (975) 1471 (1085)run 76 (56) 298 (220) 381 (281) 465 (343) 549 (405) 632 (466) 716 (528) 799 (590)end 97 (72) 508 (375) 666 (491) 823 (607) 981 (723) 1139 (840) 1296 (956) 1454 (1072)start 360 (265) 281 (207) 370 (273) 546 (403) 635 (468) 812 (599)run 159 (117) 107 (79) 159 (117) 260 (192) 310 (229) 410 (302)end 222 (163) 121 (89) 215 (159) 403 (297) 496 (366) 684 (504)start 357 (263) 289 (213) 349 (257) 409 (302) 469 (346) 590 (435) 831 (613) 951 (701) 1192 (879)run 157 (116) 112 (83) 148 (109) 182 (134) 217 (160) 285 (210) 420 (310) 488 (360) 623 (460)end 218 (161) 130 (96) 194 (143) 257 (190) 321 (237) 449 (331) 704 (519) 832 (613) 1087 (802)start 353 (260) 294 (217) 372 (275) 451 (333) 530 (391) 608 (449) 687 (507) 844 (623) 1159 (854) 1316 (970)run 155 (114) 115 (85) 161 (119) 206 (152) 251 (185) 295 (218) 339 (250) 428 (316) 605 (446) 693 (511)end 214 (158) 135 (99) 218 (161) 302 (222) 385 (284) 468 (345) 552 (407) 718 (530) 1052 (776) 1218 (899)start 349 (257) 336 (248) 436 (321) 535 (395) 635 (468) 734 (542) 834 (615) 933 (688) 1132 (835) 1530 (1129)run 152 (112) 140 (103) 197 (146) 254 (187) 310 (229) 366 (270) 422 (311) 478 (353) 590 (435) 814 (600)end 210 (155) 180 (133) 285 (210) 391 (288) 496 (366) 602 (444) 707 (522) 813 (600) 1024 (755) 1446 (1066)start 344 (254) 349 (257) 472 (348) 595 (438) 717 (529) 840 (620) 963 (710) 1086 (801) 1209 (891) 1454 (1073)run 150 (110) 147 (109) 218 (161) 287 (212) 357 (263) 426 (314) 495 (365) 564 (416) 633 (467) 771 (569)end 205 (151) 193 (142) 324 (239) 454 (335) 584 (431) 714 (527) 844 (623) 975 (719) 1105 (815) 1365 (1007)start 339 (250) 473 (349) 621 (458) 770 (568) 919 (677) 1067 (787) 1216 (897) 1364 (1006) 1513 (1116)run 147 (108) 218 (161) 302 (223) 386 (285) 470 (346) 553 (408) 637 (470) 721 (531) 804 (593)end 199 (147) 325 (239) 482 (356) 640 (472) 797 (588) 955 (704) 1112 (820) 1270 (937) 1428 (1053)start 493 (363) 370 (273) 490 (362) 731 (539) 852 (628) 1092 (806)run 220 (163) 142 (105) 213 (157) 350 (258) 418 (308) 553 (408)end 314 (231) 162 (119) 289 (213) 545 (402) 672 (496) 927 (684)start 489 (361) 352 (259) 430 (317) 509 (375) 587 (433) 745 (549) 1059 (781) 1216 (897) 1531 (1129)run 218 (161) 131 (97) 178 (131) 223 (165) 268 (198) 357 (264) 535 (394) 623 (459) 800 (590)end 310 (228) 142 (105) 226 (166) 309 (228) 392 (289) 559 (412) 892 (658) 1059 (781) 1392 (1027)start 485 (357) 336 (248) 436 (322) 535 (395) 635 (468) 734 (542) 834 (615) 1033 (762) 1431 (1055)run 216 (159) 121 (90) 181 (133) 238 (176) 295 (218) 352 (259) 408 (301) 520 (383) 744 (548)end 305 (225) 126 (93) 232 (171) 337 (249) 443 (326) 548 (404) 653 (482) 864 (638) 1286 (949)start 480 (354) 372 (275) 495 (365) 618 (456) 741 (546) 864 (637) 986 (728) 1109 (818) 1355 (999)run 213 (157) 143 (106) 215 (159) 286 (211) 355 (262) 424 (313) 494 (364) 563 (415) 701 (517)end 300 (221) 164 (121) 294 (217) 425 (313) 555 (409) 685 (505) 815 (601) 945 (697) 1206 (889)start 475 (350) 373 (275) 522 (385) 671 (495) 819 (604) 968 (714) 1116 (823) 1265 (933) 1414 (1043)run 210 (155) 144 (106) 231 (170) 315 (233) 399 (295) 483 (356) 567 (418) 650 (480) 734 (541)end 295 (217) 165 (122) 323 (238) 480 (354) 638 (470) 795 (587) 953 (703) 1111 (819) 1268 (935)start 626 (462) 407 (300) 486 (358) 643 (474) 957 (706) 1114 (822) 1429 (1054)run 283 (209) 145 (107) 193 (142) 284 (210) 463 (341) 552 (407) 728 (537)end 407 (300) 148 (109) 231 (170) 398 (293) 731 (539) 898 (662) 1231 (908)start 622 (459) 434 (320) 533 (393) 633 (467) 732 (540) 931 (687) 1329 (980) 1528 (1127)run 280 (207) 162 (119) 221 (163) 278 (205) 335 (247) 448 (330) 672 (496) 784 (578)end 403 (297) 176 (130) 281 (208) 387 (285) 492 (363) 703 (519) 1125 (830) 1336 (986)start 618 (455) 516 (381) 639 (471) 762 (562) 885 (652) 1007 (743) 1253 (924)run 278 (205) 211 (156) 282 (208) 352 (260) 422 (311) 491 (362) 630 (464)end 398 (294) 263 (194) 394 (290) 524 (386) 654 (482) 784 (578) 1045 (771)start 612 (452) 420 (310) 569 (419) 717 (529) 866 (639) 1015 (748) 1163 (858) 1312 (967)run 275 (203) 153 (113) 242 (178) 327 (241) 411 (303) 495 (365) 579 (427) 663 (489)end 393 (290) 162 (119) 319 (235) 477 (352) 634 (468) 792 (584) 950 (700) 1107 (817)start 762 (562) 543 (401) 858 (633) 1015 (749) 1330 (981)run 346 (255) 209 (154) 392 (289) 481 (355) 658 (486)end 503 (371) 239 (176) 573 (422) 739 (545) 1073 (791)start 757 (559) 533 (393) 633 (467) 832 (613) 1230 (907) 1429 (1054)run 344 (253) 203 (150) 262 (193) 377 (278) 602 (444) 714 (527)end 498 (368) 228 (168) 334 (246) 545 (402) 967 (713) 1178 (869)start 753 (555) 539 (398) 662 (488) 785 (579) 908 (670) 1154 (851)run 341 (251) 207 (153) 279 (206) 350 (258) 420 (310) 559 (412)end 493 (364) 235 (173) 365 (270) 496 (366) 626 (462) 886 (654)start 748 (551) 618 (456) 766 (565) 915 (675) 1064 (785) 1212 (894) 1510 (1113)run 338 (249) 253 (187) 339 (250) 424 (313) 508 (375) 592 (437) 760 (560)end 488 (360) 318 (235) 476 (351) 633 (467) 791 (583) 949 (700) 1264 (932)start 901 (664) 732 (540) 1130 (834) 1329 (980)run 409 (302) 300 (221) 528 (390) 641 (473)end 594 (438) 377 (278) 799 (589) 1010 (745)start 896 (661) 686 (506) 809 (596) 1054 (778) 1546 (1140)run 406 (300) 273 (201) 345 (254) 485 (358) 763 (563)end 589 (434) 328 (242) 458 (338) 718 (530) 1239 (914)start 891 (657) 667 (492) 816 (602) 964 (711) 1113 (821) 1410 (1040)run 403 (298) 262 (193) 349 (257) 434 (320) 519 (383) 687 (507)end 583 (430) 308 (227) 465 (343) 623 (459) 781 (576) 1096 (808)

Actuator Model

LPC-‐05A SYMMETRIC ACTUATOR -‐ SINGLE ACTING

SpringTorque

MaxOperatingPressure

Swept Volume*

Output Torque Nm (ft-‐lb) @ supply pressure

LPC-‐05A-‐120X-‐SR01 8,2 (119) 1.2

LPC-‐05A-‐080X-‐SR01 12 (174) 0.5

LPC-‐05A-‐100X-‐SR01 11,8 (171) 0.8

1.6

LPC-‐05A-‐160X-‐SR01 4,7 (68)

LPC-‐05A-‐140X-‐SR01 6 (87)

2.1

LPC-‐05A-‐080X-‐SR02 12 (174) 0.5

1.2

LPC-‐05A-‐140X-‐SR02 6,4 (93) 1.6

LPC-‐05A-‐100X-‐SR02 12 (174) 0.8

LPC-‐05A-‐120X-‐SR02 8,7 (126)

9,2 (133) 1.2

6,8 (99) 1.6

4,9 (71) 2.1

LPC-‐05A-‐100X-‐SR03

LPC-‐05A-‐160X-‐SR02

12 (174) 0.8

LPC-‐05A-‐140X-‐SR03

LPC-‐05A-‐120X-‐SR03

2.1

LPC-‐05A-‐120X-‐SR04 9,7 (141) 1.2

LPC-‐05A-‐160X-‐SR03 5,2 (75)

7,1 (103) 1.6

LPC-‐05A-‐160X-‐SR04

LPC-‐05A-‐140X-‐SR04

5,5 (80) 2.1

10,3 (149) 1.2

LPC-‐05A-‐140X-‐SR05 7,6 (110) 1.6

LPC-‐05A-‐120X-‐SR05

2.1

LPC-‐05A-‐140X-‐SR06

6,1 (88) 2.1

LPC-‐05A-‐160X-‐SR05 5,8 (84)

8 (116) 1.6

LPC-‐05A-‐160X-‐SR06

LPC-‐10A-‐140X-‐SR01

Actuator Model


SpringTorque


Swept Volume*


12 (174) 2.1

LPC-‐10A-‐160X-‐SR01 11,1 (161) 2.7

12 (174) 1.1

LPC-‐10A-‐120X-‐SR01 12 (174) 1.5

LPC-‐10A-‐100X-‐SR01

LPC-‐10A-‐200X-‐SR01 7,1 (103) 4.2

LPC-‐10A-‐180X-‐SR01 8,8 (128) 3.4

5,9 (86) 5.1

LPC-‐10A-‐120X-‐SR02

LPC-‐10A-‐220X-‐SR01

LPC-‐10A-‐160X-‐SR02 11,8 (171) 2.7

12 (174) 1.5

LPC-‐10A-‐140X-‐SR02 12 (174) 2.1

LPC-‐10A-‐200X-‐SR02 7,5 (109) 4.2

LPC-‐10A-‐180X-‐SR02 9,3 (135) 3.4

2.1

LPC-‐10A-‐160X-‐SR03 12 (174) 2.7

5.1

LPC-‐10A-‐140X-‐SR03 12 (174)

LPC-‐10A-‐220X-‐SR02 6,2 (90)

3.4

LPC-‐10A-‐200X-‐SR03 7,9 (115) 4.2

LPC-‐10A-‐180X-‐SR03 9,8 (142)

5.1

LPC-‐10A-‐160X-‐SR04 12 (174) 2.7

LPC-‐10A-‐220X-‐SR03 6,6 (96)

10,3 (149) 3.4

LPC-‐10A-‐200X-‐SR04 8,4 (122)

LPC-‐10A-‐180X-‐SR04

4.2

6,9 (100) 5.1

12 (174) 2.7LPC-‐10A-‐160X-‐SR05

LPC-‐10A-‐220X-‐SR04

10,8 (157) 3.4

LPC-‐10A-‐200X-‐SR05

LPC-‐10A-‐180X-‐SR05

8,8 (128) 4.2

LPC-‐10A-‐220X-‐SR05

(*) Note: Swept Volume data are referred to actuators with end stops adjusted for 90° of stroke

7,6 (110) 5.1

9,2 (133) 4.2

LPC-‐10A-‐220X-‐SR06

LPC-‐10A-‐200X-‐SR06

LPC-‐10A-‐180X-‐SR06 11,3 (164) 3.4

7,3 (106) 5.1

13flowserve.com


Table 2: Torque Table – LPC-10A - Single Acting Spring Return – Fail Close/Fail Open – Symmetric



2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)


start 59 (44) 48 (35) 63 (46) 78 (58) 93 (69) 107 (79) 122 (90) 137 (101) 166 (122) 225 (166) 255 (188) 314 (232)run 25 (18) 18 (13) 27 (20) 35 (26) 43 (32) 52 (38) 60 (44) 65 (48) 85 (63) 118 (87) 135 (100) 168 (124)end 33 (24) 19 (14) 35 (26) 50 (37) 66 (49) 81 (60) 97 (72) 113 (83) 144 (106) 207 (153) 238 (176) 301 (222)start 57 (42) 73 (54) 96 (71) 120 (89) 143 (105) 166 (122) 189 (139) 212 (156) 235 (173) 281 (207) 373 (275) 419 (309)run 24 (18) 32 (24) 46 (34) 59 (44) 72 (53) 85 (63) 98 (72) 111 (82) 124 (91) 150 (111) 201 (148) 227 (167)end 31 (23) 45 (33) 70 (52) 94 (69) 119 (88) 143 (105) 168 (124) 192 (142) 217 (160) 266 (196) 364 (268) 412 (304)start 55 (41) 122 (90) 155 (114) 189 (139) 222 (164) 255 (188) 288 (212) 321 (237) 355 (262) 421 (311)run 23 (17) 60 (44) 79 (58) 97 (72) 116 (86) 135 (100) 154 (114) 172 (127) 191 (141) 228 (168)end 29 (21) 97 (72) 132 (97) 168 (124) 203 (150) 238 (176) 273 (201) 309 (228) 344 (254) 414 (305)start 52 (38) 180 (133) 225 (166) 270 (199) 315 (232) 361 (266) 406 (299) 451 (333) 496 (366)run 21 (15) 93 (69) 118 (87) 143 (105) 169 (125) 194 (143) 220 (162) 245 (181) 271 (200)end 26 (19) 158 (117) 206 (152) 254 (187) 302 (223) 350 (258) 398 (294) 446 (329) 494 (364)start 50 (37) 246 (181) 305 (225) 364 (268) 423 (312) 482 (356)run 20 (15) 130 (96) 163 (120) 196 (145) 230 (170) 263 (194)end 23 (17) 229 (169) 291 (215) 354 (261) 417 (308) 479 (353)start 104 (77) 94 (69) 108 (80) 138 (102) 197 (145) 226 (167) 286 (211)run 45 (33) 37 (27) 46 (34) 62 (46) 96 (71) 113 (83) 146 (108)end 60 (44) 43 (32) 59 (44) 90 (66) 153 (113) 184 (136) 247 (182)start 103 (76) 91 (67) 114 (84) 137 (101) 160 (118) 183 (135) 206 (152) 252 (186) 345 (254) 391 (288) 483 (356)run 44 (32) 35 (26) 49 (36) 64 (47) 75 (55) 88 (65) 101 (74) 127 (94) 179 (132) 205 (151) 257 (190)end 58 (43) 41 (30) 65 (48) 90 (66) 114 (84) 139 (103) 163 (120) 212 (156) 310 (229) 359 (265) 457 (337)start 101 (74) 94 (69) 127 (94) 160 (118) 193 (142) 226 (167) 260 (192) 293 (216) 326 (240) 393 (290)run 43 (32) 37 (27) 56 (41) 75 (55) 94 (69) 113 (83) 131 (97) 150 (111) 169 (125) 206 (152)end 56 (41) 43 (32) 79 (58) 114 (84) 149 (110) 184 (136) 220 (162) 255 (188) 290 (214) 361 (266)start 98 (72) 151 (111) 196 (145) 242 (178) 287 (212) 332 (245) 377 (278) 422 (311) 468 (345)run 41 (30) 70 (52) 96 (71) 121 (89) 147 (108) 172 (127) 197 (145) 223 (164) 248 (183)end 54 (40) 105 (77) 153 (113) 200 (148) 248 (183) 296 (218) 344 (254) 392 (289) 440 (325)start 95 (70) 218 (161) 277 (204) 336 (248) 395 (291) 454 (335)run 40 (30) 107 (79) 141 (104) 174 (128) 207 (153) 240 (177)end 51 (38) 175 (129) 238 (176) 300 (221) 363 (268) 426 (314)start 161 (119) 119 (88) 142 (105) 165 (122) 212 (156) 304 (224) 350 (258) 442 (326)run 71 (52) 43 (32) 57 (42) 71 (52) 97 (72) 149 (110) 175 (129) 227 (167)end 98 (72) 45 (33) 70 (52) 94 (69) 143 (105) 241 (178) 290 (214) 388 (286)start 159 (117) 119 (88) 152 (112) 186 (137) 219 (162) 252 (186) 285 (210) 352 (260) 485 (358)run 70 (52) 43 (32) 63 (46) 82 (60) 101 (74) 120 (89) 139 (103) 176 (130) 251 (185)end 96 (71) 45 (33) 80 (59) 116 (86) 151 (111) 186 (137) 221 (163) 292 (215) 433 (319)start 157 (116) 155 (114) 200 (148) 246 (181) 291 (215) 336 (248) 382 (282) 427 (315)run 68 (50) 65 (48) 91 (67) 117 (86) 142 (105) 168 (124) 193 (142) 219 (162)end 93 (69) 84 (62) 132 (97) 180 (133) 228 (168) 276 (204) 324 (239) 372 (274)start 154 (114) 177 (131) 236 (174) 295 (218) 354 (261) 413 (305) 472 (348)run 67 (49) 77 (57) 111 (82) 144 (106) 178 (131) 211 (156) 244 (180)end 90 (66) 106 (78) 169 (125) 232 (171) 294 (217) 357 (263) 419 (309)start 206 (152) 156 (115) 190 (140) 223 (164) 256 (189) 322 (237) 455 (336)run 90 (66) 58 (43) 77 (57) 97 (72) 116 (86) 154 (114) 228 (168)end 124 (91) 61 (45) 97 (72) 132 (97) 167 (123) 238 (176) 378 (279)start 203 (150) 171 (126) 217 (160) 262 (193) 307 (226) 352 (260) 398 (294) 488 (360)run 88 (65) 67 (49) 93 (69) 119 (88) 145 (107) 170 (125) 196 (145) 247 (182)end 121 (89) 77 (57) 125 (92) 173 (128) 221 (163) 269 (198) 317 (234) 413 (305)start 200 (148) 207 (153) 266 (196) 325 (240) 384 (283) 443 (327)run 87 (64) 87 (64) 121 (89) 155 (114) 188 (139) 221 (163)end 118 (87) 115 (85) 177 (131) 240 (177) 303 (223) 365 (269)start 267 (197) 216 (159) 283 (209) 416 (307) 482 (356)run 117 (86) 83 (61) 122 (90) 198 (146) 235 (173)end 162 (119) 95 (70) 166 (122) 306 (226) 377 (278)start 265 (195) 222 (164) 267 (197) 313 (231) 358 (264) 448 (330)run 116 (86) 87 (64) 113 (83) 139 (103) 165 (122) 216 (159)end 159 (117) 101 (74) 149 (110) 197 (145) 245 (181) 341 (252)start 262 (193) 226 (167) 285 (210) 344 (254) 403 (297) 462 (341)run 114 (84) 89 (66) 123 (91) 157 (116) 191 (141) 224 (165)end 156 (115) 105 (77) 168 (124) 231 (170) 293 (216) 356 (263)start 315 (232) 231 (170) 276 (204) 321 (237) 411 (303)run 139 (103) 85 (63) 112 (83) 138 (102) 190 (140)end 194 (143) 90 (66) 138 (102) 186 (137) 282 (208)start 312 (230) 248 (183) 307 (226) 366 (270) 425 (313) 484 (357)run 138 (102) 95 (70) 130 (96) 164 (121) 198 (146) 231 (170)end 192 (142) 109 (80) 172 (127) 234 (173) 297 (219) 360 (266)


2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)


start 206 (152) 167 (123) 198 (146) 228 (168) 290 (214) 413 (304) 474 (350) 597 (440)run 89 (66) 63 (47) 82 (60) 99 (73) 135 (99) 204 (150) 239 (176) 308 (227)end 122 (90) 71 (52) 103 (76) 136 (100) 201 (148) 331 (244) 397 (292) 527 (388)start 203 (150) 167 (123) 211 (156) 255 (188) 299 (221) 344 (253) 388 (286) 476 (351) 653 (482) 742 (547) 919 (677)run 88 (65) 63 (47) 89 (66) 115 (85) 140 (103) 165 (122) 190 (140) 240 (177) 339 (250) 389 (287) 488 (360)end 119 (88) 71 (52) 118 (87) 164 (121) 211 (156) 258 (190) 305 (225) 399 (294) 586 (432) 680 (502) 868 (640)start 200 (147) 155 (114) 215 (159) 275 (203) 336 (247) 396 (292) 456 (336) 516 (381) 576 (425) 697 (514) 937 (691) 1058 (780) 1299 (958)run 86 (63) 56 (41) 92 (68) 126 (93) 160 (118) 194 (143) 228 (168) 262 (193) 296 (218) 364 (268) 499 (368) 567 (418) 702 (518)end 116 (85) 58 (43) 122 (90) 186 (137) 250 (184) 313 (231) 377 (278) 441 (325) 505 (372) 632 (466) 888 (655) 1015 (749) 1271 (937)start 196 (145) 243 (180) 322 (237) 401 (295) 479 (353) 558 (411) 637 (469) 715 (527) 794 (585) 951 (701) 1265 (933) 1423 (1049)run 84 (62) 108 (80) 153 (113) 197 (145) 241 (178) 286 (211) 330 (243) 374 (276) 418 (308) 507 (374) 684 (504) 772 (569)end 112 (82) 152 (112) 235 (173) 319 (235) 402 (296) 485 (358) 569 (419) 652 (481) 735 (542) 902 (665) 1235 (911) 1402 (1034)start 192 (142) 344 (253) 443 (327) 543 (400) 642 (474) 742 (547) 841 (620) 941 (694) 1040 (767) 1239 (914)run 81 (60) 165 (122) 221 (163) 277 (204) 333 (246) 389 (287) 445 (328) 501 (369) 557 (411) 669 (493)end 107 (79) 258 (190) 364 (268) 469 (346) 575 (424) 680 (502) 786 (579) 891 (657) 997 (735) 1208 (891)start 187 (138) 456 (336) 579 (427) 701 (517) 824 (608) 947 (698) 1070 (789) 1193 (880) 1316 (970) 1561 (1151)run 79 (58) 228 (168) 297 (219) 366 (270) 435 (321) 504 (372) 574 (423) 643 (474) 712 (525) 850 (627)end 102 (76) 377 (278) 507 (374) 637 (470) 768 (566) 898 (662) 1028 (758) 1158 (854) 1289 (950) 1549 (1142)start 182 (134) 580 (427) 728 (537) 877 (647) 1025 (756) 1174 (866) 1323 (975) 1471 (1085)run 76 (56) 298 (220) 381 (281) 465 (343) 549 (405) 632 (466) 716 (528) 799 (590)end 97 (72) 508 (375) 666 (491) 823 (607) 981 (723) 1139 (840) 1296 (956) 1454 (1072)start 360 (265) 281 (207) 370 (273) 546 (403) 635 (468) 812 (599)run 159 (117) 107 (79) 159 (117) 260 (192) 310 (229) 410 (302)end 222 (163) 121 (89) 215 (159) 403 (297) 496 (366) 684 (504)start 357 (263) 289 (213) 349 (257) 409 (302) 469 (346) 590 (435) 831 (613) 951 (701) 1192 (879)run 157 (116) 112 (83) 148 (109) 182 (134) 217 (160) 285 (210) 420 (310) 488 (360) 623 (460)end 218 (161) 130 (96) 194 (143) 257 (190) 321 (237) 449 (331) 704 (519) 832 (613) 1087 (802)start 353 (260) 294 (217) 372 (275) 451 (333) 530 (391) 608 (449) 687 (507) 844 (623) 1159 (854) 1316 (970)run 155 (114) 115 (85) 161 (119) 206 (152) 251 (185) 295 (218) 339 (250) 428 (316) 605 (446) 693 (511)end 214 (158) 135 (99) 218 (161) 302 (222) 385 (284) 468 (345) 552 (407) 718 (530) 1052 (776) 1218 (899)start 349 (257) 336 (248) 436 (321) 535 (395) 635 (468) 734 (542) 834 (615) 933 (688) 1132 (835) 1530 (1129)run 152 (112) 140 (103) 197 (146) 254 (187) 310 (229) 366 (270) 422 (311) 478 (353) 590 (435) 814 (600)end 210 (155) 180 (133) 285 (210) 391 (288) 496 (366) 602 (444) 707 (522) 813 (600) 1024 (755) 1446 (1066)start 344 (254) 349 (257) 472 (348) 595 (438) 717 (529) 840 (620) 963 (710) 1086 (801) 1209 (891) 1454 (1073)run 150 (110) 147 (109) 218 (161) 287 (212) 357 (263) 426 (314) 495 (365) 564 (416) 633 (467) 771 (569)end 205 (151) 193 (142) 324 (239) 454 (335) 584 (431) 714 (527) 844 (623) 975 (719) 1105 (815) 1365 (1007)start 339 (250) 473 (349) 621 (458) 770 (568) 919 (677) 1067 (787) 1216 (897) 1364 (1006) 1513 (1116)run 147 (108) 218 (161) 302 (223) 386 (285) 470 (346) 553 (408) 637 (470) 721 (531) 804 (593)end 199 (147) 325 (239) 482 (356) 640 (472) 797 (588) 955 (704) 1112 (820) 1270 (937) 1428 (1053)start 493 (363) 370 (273) 490 (362) 731 (539) 852 (628) 1092 (806)run 220 (163) 142 (105) 213 (157) 350 (258) 418 (308) 553 (408)end 314 (231) 162 (119) 289 (213) 545 (402) 672 (496) 927 (684)start 489 (361) 352 (259) 430 (317) 509 (375) 587 (433) 745 (549) 1059 (781) 1216 (897) 1531 (1129)run 218 (161) 131 (97) 178 (131) 223 (165) 268 (198) 357 (264) 535 (394) 623 (459) 800 (590)end 310 (228) 142 (105) 226 (166) 309 (228) 392 (289) 559 (412) 892 (658) 1059 (781) 1392 (1027)start 485 (357) 336 (248) 436 (322) 535 (395) 635 (468) 734 (542) 834 (615) 1033 (762) 1431 (1055)run 216 (159) 121 (90) 181 (133) 238 (176) 295 (218) 352 (259) 408 (301) 520 (383) 744 (548)end 305 (225) 126 (93) 232 (171) 337 (249) 443 (326) 548 (404) 653 (482) 864 (638) 1286 (949)start 480 (354) 372 (275) 495 (365) 618 (456) 741 (546) 864 (637) 986 (728) 1109 (818) 1355 (999)run 213 (157) 143 (106) 215 (159) 286 (211) 355 (262) 424 (313) 494 (364) 563 (415) 701 (517)end 300 (221) 164 (121) 294 (217) 425 (313) 555 (409) 685 (505) 815 (601) 945 (697) 1206 (889)start 475 (350) 373 (275) 522 (385) 671 (495) 819 (604) 968 (714) 1116 (823) 1265 (933) 1414 (1043)run 210 (155) 144 (106) 231 (170) 315 (233) 399 (295) 483 (356) 567 (418) 650 (480) 734 (541)end 295 (217) 165 (122) 323 (238) 480 (354) 638 (470) 795 (587) 953 (703) 1111 (819) 1268 (935)start 626 (462) 407 (300) 486 (358) 643 (474) 957 (706) 1114 (822) 1429 (1054)run 283 (209) 145 (107) 193 (142) 284 (210) 463 (341) 552 (407) 728 (537)end 407 (300) 148 (109) 231 (170) 398 (293) 731 (539) 898 (662) 1231 (908)start 622 (459) 434 (320) 533 (393) 633 (467) 732 (540) 931 (687) 1329 (980) 1528 (1127)run 280 (207) 162 (119) 221 (163) 278 (205) 335 (247) 448 (330) 672 (496) 784 (578)end 403 (297) 176 (130) 281 (208) 387 (285) 492 (363) 703 (519) 1125 (830) 1336 (986)start 618 (455) 516 (381) 639 (471) 762 (562) 885 (652) 1007 (743) 1253 (924)run 278 (205) 211 (156) 282 (208) 352 (260) 422 (311) 491 (362) 630 (464)end 398 (294) 263 (194) 394 (290) 524 (386) 654 (482) 784 (578) 1045 (771)start 612 (452) 420 (310) 569 (419) 717 (529) 866 (639) 1015 (748) 1163 (858) 1312 (967)run 275 (203) 153 (113) 242 (178) 327 (241) 411 (303) 495 (365) 579 (427) 663 (489)end 393 (290) 162 (119) 319 (235) 477 (352) 634 (468) 792 (584) 950 (700) 1107 (817)start 762 (562) 543 (401) 858 (633) 1015 (749) 1330 (981)run 346 (255) 209 (154) 392 (289) 481 (355) 658 (486)end 503 (371) 239 (176) 573 (422) 739 (545) 1073 (791)start 757 (559) 533 (393) 633 (467) 832 (613) 1230 (907) 1429 (1054)run 344 (253) 203 (150) 262 (193) 377 (278) 602 (444) 714 (527)end 498 (368) 228 (168) 334 (246) 545 (402) 967 (713) 1178 (869)start 753 (555) 539 (398) 662 (488) 785 (579) 908 (670) 1154 (851)run 341 (251) 207 (153) 279 (206) 350 (258) 420 (310) 559 (412)end 493 (364) 235 (173) 365 (270) 496 (366) 626 (462) 886 (654)start 748 (551) 618 (456) 766 (565) 915 (675) 1064 (785) 1212 (894) 1510 (1113)run 338 (249) 253 (187) 339 (250) 424 (313) 508 (375) 592 (437) 760 (560)end 488 (360) 318 (235) 476 (351) 633 (467) 791 (583) 949 (700) 1264 (932)start 901 (664) 732 (540) 1130 (834) 1329 (980)run 409 (302) 300 (221) 528 (390) 641 (473)end 594 (438) 377 (278) 799 (589) 1010 (745)start 896 (661) 686 (506) 809 (596) 1054 (778) 1546 (1140)run 406 (300) 273 (201) 345 (254) 485 (358) 763 (563)end 589 (434) 328 (242) 458 (338) 718 (530) 1239 (914)start 891 (657) 667 (492) 816 (602) 964 (711) 1113 (821) 1410 (1040)run 403 (298) 262 (193) 349 (257) 434 (320) 519 (383) 687 (507)end 583 (430) 308 (227) 465 (343) 623 (459) 781 (576) 1096 (808)

Actuator Model


SpringTorque


Swept Volume*


LPC-‐05A-‐120X-‐SR01 8,2 (119) 1.2

LPC-‐05A-‐080X-‐SR01 12 (174) 0.5

LPC-‐05A-‐100X-‐SR01 11,8 (171) 0.8

1.6

LPC-‐05A-‐160X-‐SR01 4,7 (68)

LPC-‐05A-‐140X-‐SR01 6 (87)

2.1

LPC-‐05A-‐080X-‐SR02 12 (174) 0.5

1.2

LPC-‐05A-‐140X-‐SR02 6,4 (93) 1.6

LPC-‐05A-‐100X-‐SR02 12 (174) 0.8

LPC-‐05A-‐120X-‐SR02 8,7 (126)

9,2 (133) 1.2

6,8 (99) 1.6

4,9 (71) 2.1

LPC-‐05A-‐100X-‐SR03

LPC-‐05A-‐160X-‐SR02

12 (174) 0.8

LPC-‐05A-‐140X-‐SR03

LPC-‐05A-‐120X-‐SR03

2.1

LPC-‐05A-‐120X-‐SR04 9,7 (141) 1.2

LPC-‐05A-‐160X-‐SR03 5,2 (75)

7,1 (103) 1.6

LPC-‐05A-‐160X-‐SR04

LPC-‐05A-‐140X-‐SR04

5,5 (80) 2.1

10,3 (149) 1.2

LPC-‐05A-‐140X-‐SR05 7,6 (110) 1.6

LPC-‐05A-‐120X-‐SR05

2.1

LPC-‐05A-‐140X-‐SR06

6,1 (88) 2.1

LPC-‐05A-‐160X-‐SR05 5,8 (84)

8 (116) 1.6

LPC-‐05A-‐160X-‐SR06

LPC-‐10A-‐140X-‐SR01

Actuator Model


SpringTorque


Swept Volume*


12 (174) 2.1

LPC-‐10A-‐160X-‐SR01 11,1 (161) 2.7

12 (174) 1.1

LPC-‐10A-‐120X-‐SR01 12 (174) 1.5

LPC-‐10A-‐100X-‐SR01

LPC-‐10A-‐200X-‐SR01 7,1 (103) 4.2

LPC-‐10A-‐180X-‐SR01 8,8 (128) 3.4

5,9 (86) 5.1

LPC-‐10A-‐120X-‐SR02

LPC-‐10A-‐220X-‐SR01

LPC-‐10A-‐160X-‐SR02 11,8 (171) 2.7

12 (174) 1.5

LPC-‐10A-‐140X-‐SR02 12 (174) 2.1

LPC-‐10A-‐200X-‐SR02 7,5 (109) 4.2

LPC-‐10A-‐180X-‐SR02 9,3 (135) 3.4

2.1

LPC-‐10A-‐160X-‐SR03 12 (174) 2.7

5.1

LPC-‐10A-‐140X-‐SR03 12 (174)

LPC-‐10A-‐220X-‐SR02 6,2 (90)

3.4

LPC-‐10A-‐200X-‐SR03 7,9 (115) 4.2

LPC-‐10A-‐180X-‐SR03 9,8 (142)

5.1

LPC-‐10A-‐160X-‐SR04 12 (174) 2.7

LPC-‐10A-‐220X-‐SR03 6,6 (96)

10,3 (149) 3.4

LPC-‐10A-‐200X-‐SR04 8,4 (122)

LPC-‐10A-‐180X-‐SR04

4.2

6,9 (100) 5.1

12 (174) 2.7LPC-‐10A-‐160X-‐SR05

LPC-‐10A-‐220X-‐SR04

10,8 (157) 3.4

LPC-‐10A-‐200X-‐SR05

LPC-‐10A-‐180X-‐SR05

8,8 (128) 4.2

LPC-‐10A-‐220X-‐SR05

(*) Note: Swept Volume data are referred to actuators with end stops adjusted for 90° of stroke

7,6 (110) 5.1

9,2 (133) 4.2

LPC-‐10A-‐220X-‐SR06

LPC-‐10A-‐200X-‐SR06

LPC-‐10A-‐180X-‐SR06 11,3 (164) 3.4

7,3 (106) 5.1

14


Table 4: Torque Table – LPC-10A - Double Acting – Symmetric


Torque Charts – Double Acting – Imperial and MetricTable 3: Torque Table – LPC-05A – Double Acting – Symmetric



2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)

Port "N" Port "P"

Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) Nm (lb-‐ft) barg (PSIG) L L

start 71 (52) 86 (63) 100 (74) 115 (85) 130 (96) 145 (107) 160 (118) 174 (128) 204 (150) 263 (194) 292 (215) 351 (259)run 40 (29) 48 (35) 57 (42) 65 (48) 73 (54) 81 (60) 90 (66) 98 (72) 115 (85) 148 (109) 164 (121) 198 (146)end 75 (55) 91 (67) 107 (79) 122 (90) 138 (102) 153 (113) 169 (125) 185 (136) 216 (159) 279 (206) 310 (229) 372 (274)start 111 (82) 134 (99) 157 (116) 180 (133) 203 (150) 226 (167) 249 (184) 272 (201) 318 (235) 411 (303) 456 (336)run 62 (46) 75 (55) 88 (65) 101 (74) 114 (84) 127 (94) 140 (103) 153 (113) 179 (132) 231 (170) 257 (190)end 117 (86) 142 (105) 166 (122) 191 (141) 215 (159) 240 (177) 264 (195) 289 (213) 338 (249) 435 (321) 484 (357)start 160 (118) 193 (142) 226 (167) 259 (191) 292 (215) 326 (240) 359 (265) 392 (289) 459 (339)run 90 (66) 108 (80) 127 (94) 146 (108) 164 (121) 183 (135) 202 (149) 221 (163) 258 (190)end 169 (125) 204 (150) 240 (177) 275 (203) 310 (229) 345 (254) 381 (281) 416 (307) 486 (358)start 217 (160) 262 (193) 308 (227) 353 (260) 398 (294) 443 (327)run 122 (90) 148 (109) 173 (128) 198 (146) 224 (165) 249 (184)end 230 (170) 278 (205) 326 (240) 374 (276) 422 (311) 470 (347)start 284 (209) 343 (253) 402 (296) 461 (340)run 160 (118) 193 (142) 226 (167) 259 (191)end 301 (222) 363 (268) 426 (314) 489 (361)


2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)

Port "N" Port "P"


start 147 (108) 178 (131) 209 (154) 240 (177) 270 (199) 301 (222) 332 (245) 362 (267) 424 (313) 547 (403) 608 (448) 731 (539)run 83 (61) 100 (74) 117 (86) 135 (100) 152 (112) 159 (117) 187 (138) 204 (150) 238 (176) 307 (226) 342 (252) 411 (303)end 156 (115) 189 (139) 221 (163) 254 (187) 287 (212) 319 (235) 352 (260) 384 (283) 450 (332) 580 (428) 645 (476) 775 (572)start 212 (156) 257 (190) 301 (222) 345 (254) 389 (287) 433 (319) 478 (353) 522 (385) 610 (450) 787 (580) 876 (646) 1052 (776)run 119 (88) 144 (106) 169 (125) 194 (143) 219 (162) 244 (180) 269 (198) 294 (217) 343 (253) 443 (327) 492 (363) 592 (437)end 225 (166) 272 (201) 319 (235) 366 (270) 413 (305) 460 (339) 506 (373) 553 (408) 647 (477) 835 (616) 928 (684) 1116 (823)start 289 (213) 349 (257) 409 (302) 470 (347) 530 (391) 590 (435) 650 (479) 710 (524) 831 (613) 1071 (790) 1192 (879) 1433 (1057)run 163 (120) 196 (145) 230 (170) 264 (195) 298 (220) 332 (245) 366 (270) 399 (294) 467 (344) 603 (445) 670 (494) 806 (594)end 306 (226) 370 (273) 434 (320) 498 (367) 562 (415) 625 (461) 689 (508) 753 (555) 881 (650) 1136 (838) 1264 (932) 1519 (1120)start 377 (278) 456 (336) 535 (395) 613 (452) 692 (510) 770 (568) 849 (626) 928 (684) 1085 (800) 1399 (1032)run 212 (156) 256 (189) 301 (222) 345 (254) 389 (287) 433 (319) 478 (353) 522 (385) 610 (450) 787 (580)end 400 (295) 483 (356) 567 (418) 650 (479) 734 (541) 817 (603) 900 (664) 984 (726) 1150 (848) 1484 (1095)start 478 (353) 577 (426) 677 (499) 776 (572) 876 (646) 975 (719) 1075 (793) 1174 (866) 1373 (1013)run 269 (198) 325 (240) 381 (281) 437 (322) 492 (363) 548 (404) 604 (445) 660 (487) 772 (569)end 506 (373) 612 (451) 717 (529) 823 (607) 928 (684) 1034 (763) 1139 (840) 1245 (918) 1459 (1076)start 590 (435) 712 (525) 835 (616) 958 (707) 1081 (797) 1204 (888) 1327 (979) 1449 (1069)run 332 (245) 401 (296) 470 (347) 539 (398) 608 (448) 677 (499) 746 (550) 815 (601)end 625 (461) 755 (557) 886 (653) 1016 (749) 1146 (845) 1276 (941) 1407 (1038) 1537 (1134)start 713 (526) 862 (636) 1011 (746) 1159 (855) 1308 (965) 1457 (1075)run 401 (296) 485 (358) 568 (419) 652 (481) 736 (543) 819 (604)end 756 (558) 914 (674) 1072 (791) 1229 (906) 1387 (1023) 1544 (1139)

LPC-‐05A-‐100X-‐DA

LPC-‐05A-‐120X-‐DA

LPC-‐05A-‐140X-‐DA

LPC-‐05A-‐160X-‐DA

LPC DOUBLE ACTING SYMMETRIC AND CANTED

Actuator Model



12 (174)LPC-‐05A-‐080X-‐DA

1.6

2.1

10,3 (149)

7,2 (104)

5,3 (77)

4 (58)

3.4

9,6 (139)

7,6 (110)

2.1

2.4

0.9

1.5

12 (174)

12 (174)

12 (174)

6,2 (90)

5,1 (74)

4.2

5.1

Swept Volume*

LPC-‐05A SYMMETRIC ACTUATOR -‐ DOUBLE ACTING

2.8

3.1

3.5

0.5

0.8

1.2

3.9

4.4

Swept Volume*

6.7

7.1


(*) Note: Swept Volume data are referred to actuators with end stops adjusted for 90° of stroke. Refer to Figure 9 for details of Ports "N" and "P"

Actuator ModelMax

OperatingPressureOutput Torque Nm (ft-‐lb) @ supply pressure

LPC-‐10A-‐100X-‐DA

LPC-‐10A-‐120X-‐DA


7.7

8.3

9.0

9.8

10.7

LPC-‐10A-‐200X-‐DA

LPC-‐10A-‐220X-‐DA

LPC-‐10A-‐140X-‐DA

LPC-‐10A-‐160X-‐DA

LPC-‐10A-‐180X-‐DA


2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)

Port "N" Port "P"


start 71 (52) 86 (63) 100 (74) 115 (85) 130 (96) 145 (107) 160 (118) 174 (128) 204 (150) 263 (194) 292 (215) 351 (259)run 40 (29) 48 (35) 57 (42) 65 (48) 73 (54) 81 (60) 90 (66) 98 (72) 115 (85) 148 (109) 164 (121) 198 (146)end 75 (55) 91 (67) 107 (79) 122 (90) 138 (102) 153 (113) 169 (125) 185 (136) 216 (159) 279 (206) 310 (229) 372 (274)start 111 (82) 134 (99) 157 (116) 180 (133) 203 (150) 226 (167) 249 (184) 272 (201) 318 (235) 411 (303) 456 (336)run 62 (46) 75 (55) 88 (65) 101 (74) 114 (84) 127 (94) 140 (103) 153 (113) 179 (132) 231 (170) 257 (190)end 117 (86) 142 (105) 166 (122) 191 (141) 215 (159) 240 (177) 264 (195) 289 (213) 338 (249) 435 (321) 484 (357)start 160 (118) 193 (142) 226 (167) 259 (191) 292 (215) 326 (240) 359 (265) 392 (289) 459 (339)run 90 (66) 108 (80) 127 (94) 146 (108) 164 (121) 183 (135) 202 (149) 221 (163) 258 (190)end 169 (125) 204 (150) 240 (177) 275 (203) 310 (229) 345 (254) 381 (281) 416 (307) 486 (358)start 217 (160) 262 (193) 308 (227) 353 (260) 398 (294) 443 (327)run 122 (90) 148 (109) 173 (128) 198 (146) 224 (165) 249 (184)end 230 (170) 278 (205) 326 (240) 374 (276) 422 (311) 470 (347)start 284 (209) 343 (253) 402 (296) 461 (340)run 160 (118) 193 (142) 226 (167) 259 (191)end 301 (222) 363 (268) 426 (314) 489 (361)


2.5 (36) 3 (44) 3.5 (51) 4 (58) 4.5 (65) 5 (73) 5.5 (80) 6 (87) 7 (102) 9 (131) 10 (145) 12 (174)

Port "N" Port "P"


start 147 (108) 178 (131) 209 (154) 240 (177) 270 (199) 301 (222) 332 (245) 362 (267) 424 (313) 547 (403) 608 (448) 731 (539)run 83 (61) 100 (74) 117 (86) 135 (100) 152 (112) 159 (117) 187 (138) 204 (150) 238 (176) 307 (226) 342 (252) 411 (303)end 156 (115) 189 (139) 221 (163) 254 (187) 287 (212) 319 (235) 352 (260) 384 (283) 450 (332) 580 (428) 645 (476) 775 (572)start 212 (156) 257 (190) 301 (222) 345 (254) 389 (287) 433 (319) 478 (353) 522 (385) 610 (450) 787 (580) 876 (646) 1052 (776)run 119 (88) 144 (106) 169 (125) 194 (143) 219 (162) 244 (180) 269 (198) 294 (217) 343 (253) 443 (327) 492 (363) 592 (437)end 225 (166) 272 (201) 319 (235) 366 (270) 413 (305) 460 (339) 506 (373) 553 (408) 647 (477) 835 (616) 928 (684) 1116 (823)start 289 (213) 349 (257) 409 (302) 470 (347) 530 (391) 590 (435) 650 (479) 710 (524) 831 (613) 1071 (790) 1192 (879) 1433 (1057)run 163 (120) 196 (145) 230 (170) 264 (195) 298 (220) 332 (245) 366 (270) 399 (294) 467 (344) 603 (445) 670 (494) 806 (594)end 306 (226) 370 (273) 434 (320) 498 (367) 562 (415) 625 (461) 689 (508) 753 (555) 881 (650) 1136 (838) 1264 (932) 1519 (1120)start 377 (278) 456 (336) 535 (395) 613 (452) 692 (510) 770 (568) 849 (626) 928 (684) 1085 (800) 1399 (1032)run 212 (156) 256 (189) 301 (222) 345 (254) 389 (287) 433 (319) 478 (353) 522 (385) 610 (450) 787 (580)end 400 (295) 483 (356) 567 (418) 650 (479) 734 (541) 817 (603) 900 (664) 984 (726) 1150 (848) 1484 (1095)start 478 (353) 577 (426) 677 (499) 776 (572) 876 (646) 975 (719) 1075 (793) 1174 (866) 1373 (1013)run 269 (198) 325 (240) 381 (281) 437 (322) 492 (363) 548 (404) 604 (445) 660 (487) 772 (569)end 506 (373) 612 (451) 717 (529) 823 (607) 928 (684) 1034 (763) 1139 (840) 1245 (918) 1459 (1076)start 590 (435) 712 (525) 835 (616) 958 (707) 1081 (797) 1204 (888) 1327 (979) 1449 (1069)run 332 (245) 401 (296) 470 (347) 539 (398) 608 (448) 677 (499) 746 (550) 815 (601)end 625 (461) 755 (557) 886 (653) 1016 (749) 1146 (845) 1276 (941) 1407 (1038) 1537 (1134)start 713 (526) 862 (636) 1011 (746) 1159 (855) 1308 (965) 1457 (1075)run 401 (296) 485 (358) 568 (419) 652 (481) 736 (543) 819 (604)end 756 (558) 914 (674) 1072 (791) 1229 (906) 1387 (1023) 1544 (1139)

LPC-‐05A-‐100X-‐DA

LPC-‐05A-‐120X-‐DA

LPC-‐05A-‐140X-‐DA

LPC-‐05A-‐160X-‐DA

LPC DOUBLE ACTING SYMMETRIC AND CANTED

Actuator Model



12 (174)LPC-‐05A-‐080X-‐DA

1.6

2.1

10,3 (149)

7,2 (104)

5,3 (77)

4 (58)

3.4

9,6 (139)

7,6 (110)

2.1

2.4

0.9

1.5

12 (174)

12 (174)

12 (174)

6,2 (90)

5,1 (74)

4.2

5.1

Swept Volume*


2.8

3.1

3.5

0.5

0.8

1.2

3.9

4.4

Swept Volume*

6.7

7.1



Actuator ModelMax

OperatingPressureOutput Torque Nm (ft-‐lb) @ supply pressure

LPC-‐10A-‐100X-‐DA

LPC-‐10A-‐120X-‐DA


7.7

8.3

9.0

9.8

10.7

LPC-‐10A-‐200X-‐DA

LPC-‐10A-‐220X-‐DA

LPC-‐10A-‐140X-‐DA

LPC-‐10A-‐160X-‐DA

LPC-‐10A-‐180X-‐DA

15flowserve.com


Dimensional Data and Weights – Single ActingFigure 7: Dimensional Data – Single Acting – Sym/Cant – Fail Close

Figure 8: Dimensional Data – Single Acting – Sym/Cant – Fail Open

16


Table 5: Dimensions & Weights – LPC-05 – Sym/Cant – Single Acting – Fail Close/Fail Open

Dimensions mm (in) - Kg (lbs)

Model A B D E K H L Q Z 'N' NPT PORT Weight

LPC-05X-080Y-SR01716 178 100 438 38 175 69 120 140

1/4"37

28.19 7.01 3.94 17.24 1.50 6.89 2.72 4.72 5.51 82

LPC-05X-080Y-SR02716 178 100 438 38 175 69 120 140

1/4"38

28.19 7.01 3.94 17.24 1.50 6.89 2.72 4.72 5.51 83

LPC-05X-100Y-SR01716 178 100 438 38 175 69 140 140

1/4"43

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.51 5.51 94

LPC-05X-100Y-SR02716 178 100 438 38 175 69 140 140

1/4"43

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.51 5.51 95

LPC-05X-100Y-SR03716 178 100 438 38 175 69 140 140

1/4"44

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.51 5.51 96

LPC-05X-120Y-SR01716 178 100 438 38 175 69 150 140

1/4"44

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.91 5.51 97

LPC-05X-120Y-SR02716 178 100 438 38 175 69 150 140

1/4"44

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.91 5.51 98

LPC-05X-120Y-SR03716 178 100 438 38 175 69 150 140

1/4"45

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.91 5.51 99

LPC-05X-120Y-SR04716 178 100 438 38 175 69 150 140

1/4"45

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.91 5.51 100

LPC-05X-120Y-SR05716 178 100 438 38 175 69 150 140

1/4"46

28.19 7.01 3.94 17.24 1.50 6.89 2.72 5.91 5.51 102

LPC-05X-140Y-SR01716 178 100 438 38 175 69 165 140

1/4"47

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 104

LPC-05X-140Y-SR02716 178 100 438 38 175 69 165 140

1/4"48

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 106

LPC-05X-140Y-SR03716 178 100 438 38 175 69 165 140

1/4"48

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 107

LPC-05X-140Y-SR04716 178 100 438 38 175 69 165 140

1/4"49

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 108

LPC-05X-140Y-SR05716 178 100 438 38 175 69 165 140

1/4"50

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 110

LPC-05X-140Y-SR06716 178 100 438 38 175 69 165 140

1/4"54

28.19 7.01 3.94 17.24 1.50 6.89 2.72 6.50 5.51 119

LPC-05X-160Y-SR01716 178 100 438 38 185 69 185 140

1/4"53

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 117

LPC-05X-160Y-SR02716 178 100 438 38 185 69 185 140

1/4"54

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 118

LPC-05X-160Y-SR03716 178 100 438 38 185 69 185 140

1/4"54

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 119

LPC-05X-160Y-SR04716 178 100 438 38 185 69 185 140

1/4"55

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 120

LPC-05X-160Y-SR05716 178 100 438 38 185 69 185 140

1/4"56

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 122

LPC-05X-160Y-SR06716 178 100 438 38 185 69 185 140

1/4"57

28.19 7.01 3.94 17.24 1.50 7.28 2.72 7.28 5.51 126

TOLERANCE ±10% TO BE CONSIDERED ON DIMENSIONS

17flowserve.com


Table 6: Dimensions & Weights – LPC-10 – Sym/Cant – Single Acting – Fail Close/Fail Open




LPC-10X-100Y-SR01844 240 132 472 50 245 105 140 172

1/4"68

33.23 9.45 5.20 18.58 1.97 9.65 4.13 5.51 6.77 149

LPC-10X-120Y-SR01844 240 132 472 50 245 105 165 172

1/4"72

33.23 9.45 5.20 18.58 1.97 9.65 4.13 6.50 6.77 159

LPC-10X-120Y-SR02844 240 132 472 50 245 105 165 172

1/4"74

33.23 9.45 5.20 18.58 1.97 9.65 4.13 6.50 6.77 163

LPC-10X-140Y-SR01844 240 132 472 50 245 105 165 172

1/4"77

33.23 9.45 5.20 18.58 1.97 9.65 4.13 6.50 6.77 169

LPC-10X-140Y-SR02844 240 132 472 50 245 105 165 172

1/4"79

33.23 9.45 5.20 18.58 1.97 9.65 4.13 6.50 6.77 174

LPC-10X-140Y-SR03887 240 132 515 50 245 105 165 172

1/4"81

34.92 9.45 5.20 20.28 1.97 9.65 4.13 6.50 6.77 179

LPC-10X-160Y-SR01844 240 132 472 50 245 105 185 172

1/4"79

33.23 9.45 5.20 18.58 1.97 9.65 4.13 7.28 6.77 175

LPC-10X-160Y-SR02844 240 132 472 50 245 105 185 172

1/4"81

33.23 9.45 5.20 18.58 1.97 9.65 4.13 7.28 6.77 178

LPC-10X-160Y-SR03887 240 132 515 50 245 105 185 172

1/4"83

34.92 9.45 5.20 20.28 1.97 9.65 4.13 7.28 6.77 183

LPC-10X-160Y-SR04887 240 132 515 50 245 105 185 172

1/4"85

34.92 9.45 5.20 20.28 1.97 9.65 4.13 7.28 6.77 188

LPC-10X-160Y-SR05923 240 132 551 50 245 105 185 172

1/4"87

36.34 9.45 5.20 21.69 1.97 9.65 4.13 7.28 6.77 192

LPC-10X-180Y-SR01844 240 132 472 50 245 105 230 172

1/4"90

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.06 6.77 199

LPC-10X-180Y-SR02844 240 132 472 50 245 105 230 172

1/4"92

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.06 6.77 202

LPC-10X-180Y-SR03887 240 132 515 50 245 105 230 172

1/4"93

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.06 6.77 206

LPC-10X-180Y-SR04887 240 132 515 50 245 105 230 172

1/4"96

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.06 6.77 211

LPC-10X-180Y-SR05923 240 132 551 50 245 105 230 172

1/4"97

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.06 6.77 215

LPC-10X-180Y-SR06923 240 132 551 50 245 105 230 172

1/4"99

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.06 6.77 219

LPC-10X-200Y-SR01844 240 132 472 50 245 105 245 172

1/4"99

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.65 6.77 218

LPC-10X-200Y-SR02844 240 132 472 50 245 105 245 172

1/4"100

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.65 6.77 221

18




LPC-10X-200Y-SR03887 240 132 515 50 245 105 245 172

1/4"102

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.65 6.77 226

LPC-10X-200Y-SR04887 240 132 515 50 245 105 245 172

1/4"105

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.65 6.77 231

LPC-10X-200Y-SR05923 240 132 551 50 245 105 245 172

1/4"106

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.65 6.77 234

LPC-10X-200Y-SR06923 240 132 551 50 245 105 245 172

1/4"109

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.65 6.77 241

LPC-10X-220Y-SR01844 240 132 472 50 245 105 245 172

1/4"115

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.65 6.77 254

LPC-10X-220Y-SR02844 240 132 472 50 245 105 245 172

1/4"117

33.23 9.45 5.20 18.58 1.97 9.65 4.13 9.65 6.77 257

LPC-10X-220Y-SR03887 240 132 515 50 245 105 245 172

1/4"119

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.65 6.77 261

LPC-10X-220Y-SR04887 240 132 515 50 245 105 245 172

1/4"121

34.92 9.45 5.20 20.28 1.97 9.65 4.13 9.65 6.77 266

LPC-10X-220Y-SR05923 240 132 551 50 245 105 245 172

1/4"122

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.65 6.77 269

LPC-10X-220Y-SR06923 240 132 551 50 245 105 245 172

1/4"124

36.34 9.45 5.20 21.69 1.97 9.65 4.13 9.65 6.77 273

Table 6: Dimensions & Weights – LPC-10 – Sym/Cant – Single Acting – Fail Close/Fail Open (continued)

19flowserve.com



Model A B D E K H L Q Z 'N' NPT PORT

'P' NPT PORT Weight

LPC-05X-080Y-DA568 178 100 290 38 175 69 120 140

1/4" 1/4"33

22.36 7.01 3.94 11.42 1.50 6.89 2.72 4.72 5.51 72

LPC-05X-100Y-DA568 178 100 290 38 175 69 140 140

1/4" 1/4"39

22.36 7.01 3.94 11.42 1.50 6.89 2.72 5.51 5.51 87

LPC-05X-120Y-DA568 178 100 290 38 175 69 150 140

1/4" 1/4"40

22.36 7.01 3.94 11.42 1.50 6.89 2.72 5.91 5.51 88

LPC-05X-140Y-DA568 178 100 290 38 175 69 165 140

1/4" 1/4"43

22.36 7.01 3.94 11.42 1.50 6.89 2.72 6.50 5.51 94

LPC-05X-160Y-DA568 178 100 290 38 185 69 185 140

1/4" 1/4"47

22.36 7.01 3.94 11.42 1.50 7.28 2.72 7.28 5.51 103


Dimensional Data and Weights – Double Acting

Table 7: Dimensions & Weights – LPC-05 – Sym/Cant – Double Acting

Figure 9: Dimensional Data – Double Acting – Sym/Cant

20



Model A B D E K H L Q Z 'N' NPT PORT

'P' NPT PORT Weight

LPC-10X-100Y-DA713 250 130 333 50 245 105 140 172

1/4" 1/4"56

28.07 9.84 5.12 13.11 1.97 9.65 4.13 5.51 6.77 123

LPC-10X-120Y-DA713 250 130 333 50 245 105 165 172

1/4" 1/4"60

28.07 9.84 5.12 13.11 1.97 9.65 4.13 6.50 6.77 132

LPC-10X-140Y-DA713 250 130 333 50 245 105 165 172

1/4" 1/4"63

28.07 9.84 5.12 13.11 1.97 9.65 4.13 6.50 6.77 138

LPC-10X-160Y-DA713 250 130 333 50 245 105 185 172

1/4" 1/4"67

28.07 9.84 5.12 13.11 1.97 9.65 4.13 7.28 6.77 147

LPC-10X-180Y-DA713 250 130 333 50 245 105 230 172

1/4" 1/4"73

28.07 9.84 5.12 13.11 1.97 9.65 4.13 9.06 6.77 162

LPC-10X-200Y-DA713 250 130 333 50 245 105 245 172

1/4" 1/4"75

28.07 9.84 5.12 13.11 1.97 9.65 4.13 9.65 6.77 165

LPC-10X-220Y-DA713 250 130 333 50 245 105 245 172

1/4" 1/4"81

28.07 9.84 5.12 13.11 1.97 9.65 4.13 9.65 6.77 179


Table 8: Dimensions & Weights – LPC-10 – Sym/Cant – Double Acting

21flowserve.com


Mounting Interface Dimensions

LPC-05 – Coupling Details Dimensions mm (in)

Model F G I M R S T U V Z X

LPC-05X83 65 90

M835 16 28 20 50 140

M8 3.25 2.56 3.54 1.38 0.63 1.08 0.79 1.95 5.51

LPC-10 – Coupling Details Dimensions mm (in)

Model F G I M R S T U V Z X

LPC-10X105 90 100

M850 28 46 34 88 172

M12 4.13 3.54 3.94 1.97 1.10 1.79 1.34 3.48 6.77

Figure 10: LPC Actuators Coupling Details – Symmetric/Canted

22


19

269

34

6

38

2928

2

7

8

1

3

27

13

12

11

22

10

3145

30

32

33

14

35

Single Acting

Service Kits Figure 11: LPC Actuator Spring Return and Double Acting – Exploded Views

Number Description Qty. Spare Parts*

1 Bolt 22 Cap 23 Scotch Yoke 14 Bush 25 Retaining Ring 26 Screw 2


7 Washer 28 Roller Bearing 29 O-Ring 1 X10 Guide Bar 111 Piston Rod 112 Pin 2


13 Guide Block 114 Bushing 215 Piston 116 Tie Rod 417 Spring Can 218 Hex Nut 4

* Standard Maintenance Spare Parts for On/Off Applications

23flowserve.com


20

1921

2322

17

16

25

241920

21

18

2336

25

1524

11

171622

26

18

36

15

37

Double Acting


19 Stop Bolt 220 Hex Nut 221 O-Ring 2 X22 O-Ring 1 X23 End Flange 124 O-Ring 1 X


25 O-Ring 1 X26 Adaptor Flange 127 Yoke Pin 128 Output Shaft 129 Screw 630 Housing 131 O-Ring 2 X


32 Flat Washer 133 Screw 134 Bushing 135 Spring 136 Guide Ring 2 X37 Bar Pin 838 Bushing 1

* Standard Maintenance Spare Parts for On/Off Applications

To find your local Flowserve representative or for more information about Flowserve Corporation, visit www.flowserve.com or call USA 1 800 225 6989

FCD LFENTB0002-00-A4 07/14 © 2014 Flowserve Corporation.

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applica-tions under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contrac-tors in the safe use of Flowserve products in connection with the specific application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.

© 2014 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.

Flowserve Limitorque Fluid Power SystemsProduct SalesVia Rio Vallone 1720883 Mezzago (MB), ItalyPhone: +39 039 62060 1Fax: +39 039 62060 213Email: [email protected]

Flowserve LimitorqueFluid Power SystemsManufacturing and Operations Via Rio Vallone 1720883 Mezzago (MB), ItalyPhone: +39 039 62060 1Fax: +39 039 62060 213Email: [email protected]

Flowserve LimitorqueFluid Power Systems Research and DevelopmentViale dell’Artigianato 2429122 Piacenza (PC), ItalyEmail: [email protected]

Experience in Motion

lmenim2100-00 wg series · 2014. 9. 10. · c. en 13445-3, part 3 for unfired pressure vessels 23....

Documents