lmwp corporate brochure web version - lm wind power...8: a dditional p r oductivi ... oductivi t y...

Poul La Cour 1953 LM starts to work with glass fiber Orkney Islands 1980 Some of the first LM blades 1961 Transportation tanks for live fish As far back as the 1890s Danish pioneers such as Poul La Cour experimented with the very first wind turbines 1967 LM 27 – Europe’s most produced motor sailor at the time Rotor blade production starts in Denmark Aeroconstructin Germany is acquired New factory in Grand Forks, USA Rotorline (NL) is acquired Research office, Heerhugoward, The Netherlands R&D center established in Bangalore, India New factory in Qin Huang Dao, China New factory in Saupe, Brazil Boom in the beginning of the 1980s in US wind power developments drives Danish wind technology in front In-house Mold Production Reliable tip brakes with carbon fiber shafts 1940 Lunderskov Møbelfabrik was established TECHNOLOGY PRODUCTION 2001-2008: Additional productivity and capacity expansions in Spain, India, China, USA and Poland In the beginning of the 1980s, LM Wind Power developed all blade related capabilities such as aerodynamic and structural design, static and fatigue testing as well as tooling, manufacturing and process engineering. Customers were thus able to leverage LM Wind Power not only as a supplier of blades but also as a partner. The result was even more efficient turbines. In-house Full Scale Blade Testing Lightning Protection System Vortex Generators Stall strips developed and used for aerodynamic enhancement Patent for Pre-bending of blades Lightning Protecting Systems LM DrainReceptor; LM DivertStrips; MultiReceptor LM Blade Monitoring LM Super Root Vacuum Infusion Technology became our standard – delivering flexibility in production and higher quality Carbon fiber hybrid technology 2007 RotorOpt Global R&D Wind Tunnel Production of LM 42.5 P in highmodules glass Installation of LM 61.5 ISO 14001 LM Airfoils Globlade ® 1 launched in China and USA Launch of the LM 73.5 P Launch of the LM 88.4 P SafeReceptor Insulated Lightning Protection System (ILPS) Super Pack & Stack Introducing LM 66.5 P launched for China Offshore ILPS2 UN Global Compact signatory GloBlade ® 3 ISO 9001 ISO 9000 LM 24.0 – first blade in the 1 MW segment Full scale testing secures blade reliability Development of glass fiber technologies Global business office office in Schiphol The Netherlands s LM Wind Power becomes part of GE Renewable Energy 2017 New factory in Vadodara, India 1965 Company name changed to LM Glasfiber 1965 Company name changed to LM Glasfiber Rebranding and name change to LM Wind Power Svendborg Brakes no longer a part of LM Wind Power Group Svendborg Brakes becomes part of LM Wind Power Group LM Glasfiber becomes part of Doughty Hanson & Co Factory established in Toledo, Spain New factory in Tianjin, China New factory in Gaspé, Canada New factories in Castellon, Spain Dabaspet, India and Urumqi, China New factories in Little Rock, USA and Goleniów, Poland New factory in Jiangyin,China Expansions in Qin Huang Dao and Tianjin, China First factory outside Denmark established inHosakote, India Timeline

Upload: others

Post on 24-Jan-2020

0 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: LMWP Corporate brochure web version - LM Wind Power...8: A dditional p r oductivi ... oductivi t y and c ap a ci t y e xpansions in Spain, India, C hina, USA and P oland In the beginning

Poul La Cour

1953LM starts to work with glass fiber

Orkney Islands 1980Some of the firstLM blades

1961Transportation tanksfor live fish

As far back as the 1890s Danish pioneerssuch as Poul La Cour experimented with

the very first wind turbines

1967LM 27– Europe’s mostproduced motorsailor at the time

Rotor bladeproduction starts

in Denmark

AeroconstructinGermany is acquired

New factory in Grand Forks, USA

Rotorline (NL) is acquired

Research office,Heerhugoward,

The Netherlands

R&D center establishedin Bangalore, India

New factory inQin Huang Dao, China

New factory inSaupe, Brazil

Boom in the beginning ofthe 1980s in US wind powerdevelopments drives Danish

wind technology in front

In-houseMold Production

Reliable tip brakeswith carbon fiber shafts

1940LunderskovMøbelfabrikwas established

TECHNOLOGYPRODUCTION

2001-2008: Additional productivity and capacity expansions in Spain, India, China, USA and Poland

In the beginning of the 1980s, LM Wind Power developed all blade related capabilities such as aerodynamic and structural design, static and fatigue testing as well as tooling, manufacturing and process engineering. Customers were thus able to leverage LM Wind Power not only as a supplier of blades but also as a partner. The result was even more efficient turbines.

In-house FullScale Blade Testing

Lightning Protection System

Vortex Generators

Stall strips developed and used for aerodynamicenhancement

Patent forPre-bendingof blades

LightningProtecting SystemsLM DrainReceptor;LM DivertStrips;MultiReceptor

LM Blade Monitoring

LM Super Root

Vacuum InfusionTechnology became ourstandard – deliveringflexibility in productionand higher quality

Carbonfiber hybridtechnology

2007RotorOpt

Global R&DWind TunnelProduction