luis pizarro aviation b 2016

4
Luis G. Pizarro 13417 W Glendale Avenue Apt 1142 Glendale AZ 85307 - (623) 377- 6841 [email protected]m AVIATION and GENERAL MAINTENACE 20 years of experience as a military fighter jets maintenance 7 th level worker/ supervisor. Extensive experience in aircraft maintenance, hydraulic, engines and pneudraulic systems. Performed aircraft wheel and tire inspections and wheel assembly rebuild plus installation. Experience removing Auxiliary Power Units, Emergency slides on commercial aircrafts. Performed general maintenance and parts removal on Airbus and Boeing commercial aircrafts. Experienced using measuring devices like multimeters, micrometers and digital calipers. Ability to understand and read flow charts, hydraulics schematics and electrical schematics. Experience on ground handling equipment for aircraft servicing, hydraulics and power on checks Supervisor and team member for the removal/ installation of aircraft’s landing gear system. Handpicked and appointed as waiver 7 level mechanic, as part of the F-16 Landing Gear Team. Ground handling aircraft experience on refueling, tires and other nitrogen systems servicing. Maintenance knowledge on Pratt and Whitney 220 E and General Electric 110 engines. Experience replacing logic boards, electrical motors, optical sensors and small wiring. F-16 C/D Engine Run qualified and aircraft Phase scheduled inspections experience. Experience as a shop Dock Phase Inspection Chief/ supervisor

Upload: luis-pizarro

Post on 22-Jan-2017

11 views

Category:

Documents


0 download

TRANSCRIPT

Luis G. Pizarro

13417 W Glendale Avenue Apt 1142 Glendale AZ 85307 - (623) 377-6841 [email protected]

AVIATION and GENERAL MAINTENACE

20 years of experience as a military fighter jets maintenance 7th level worker/ supervisor. Extensive experience in aircraft maintenance, hydraulic, engines and pneudraulic systems. Performed aircraft wheel and tire inspections and wheel assembly rebuild plus installation. Experience removing Auxiliary Power Units, Emergency slides on commercial aircrafts. Performed general maintenance and parts removal on Airbus and Boeing commercial aircrafts. Experienced using measuring devices like multimeters, micrometers and digital calipers. Ability to understand and read flow charts, hydraulics schematics and electrical schematics. Experience on ground handling equipment for aircraft servicing, hydraulics and power on

checks Supervisor and team member for the removal/ installation of aircraft’s landing gear system. Handpicked and appointed as waiver 7 level mechanic, as part of the F-16 Landing Gear

Team. Ground handling aircraft experience on refueling, tires and other nitrogen systems servicing. Maintenance knowledge on Pratt and Whitney 220 E and General Electric 110 engines. Experience replacing logic boards, electrical motors, optical sensors and small wiring. F-16 C/D Engine Run qualified and aircraft Phase scheduled inspections experience. Experience as a shop Dock Phase Inspection Chief/ supervisor for the F-16 C/D fighter

aircraft. Inspector and certifier of maintenance completed on the F-16 C/D combat aircraft. Removed and installed several flight control surfaces plus rigging and functional checks. Performed aircraft brakes, landing gear operational checks and other preventive maintenance. A + Certification for computer repair technician and basic computer networking. Ability to maintain, upgrades, troubleshoots and repair PC computer systems. Team member during aircraft Phase Scheduled Inspections and various functional checks. Removal and replacement of flight controls servo actuators and flight control surfaces. Replaced LRU’s engine components on Pratt and Whitney 220 E /General Electric 110

engines. Performed preventive maintenance on aircraft equipment and other related systems. Performed landing gear, flight controls and engines functional checks for proper operation. Inspected proper installation of engines and other aircraft components as a 7 level mechanic. Performed tires, hydraulic, pneumatic and oxygen systems service on F-16C/D aircraft. Supervisor/worker in Wheel and Tire shop for F-16 blocks 32 and 40 aircraft. Performed daily Pre-flight, Thru-flight and Post-flight inspections to ensure aircraft safety. Maintained Secret clearance qualification due to military job as an F-16 C/D jet mechanic. Certified military Jet engine run operator on low, high and different stages afterburner settings. Knowledge on proper hazardous waste disposal and hazard communication (HAZCOM).

Experience as a Safety NCO (Non Commissioned Officer) and storm water management. Department of Defense Fire Fighter HAZMAT and fire extinguishers inspections trained.

Luis G. Pizarro

13417 W Glendale Avenue Apt 1142 Glendale AZ 85307 - (623) 377-6841 [email protected]

Managed calibration schedules for torque wrenches and other measuring equipment. Used support ground equipment for electrical and hydraulic for aircraft maintenance

operations. Removal and installations of hydraulic/pneudraulic components such as reservoirs and

actuators. Inspect and monitor serviceability of land mobile radios and accountability inspections. Received training in Information Security (INFOSEC) and Computer Security (COMPSEC.) Experienced inspecting aviation maintenance tools and equipment for serviceability. Able to type 20 words or more per minute and Bilingual English/Spanish. Troubleshoot proximity and optical sensors as a production plant engineer. Experience with Windows XP, Vista and 7; Microsoft Word, Excel, PowerPoint, and Access. Troubleshot network issues between main computer and PLC machine controlled systems.

Employment

Aeroturbine, Aviation Aviation maintenance Assistant and Tear Down 04/2015 – 04/2016SouthWest key Programs Youth Care Worker / Maintenance 08/2014 - 11/2014Transperfect Interpreting Bilingual Remote Interpreter Costumer Service 03/2014 - 08/2014Integrity Staffing Solutions Amazon Warehouse Associates 11/2011 – 03/2014Angelica Textiles Company Production Maintenance Engineer 08/2010 – 11/2011Vangent Inc 2010 Census Clerk and Bilingual Call Center 04/2010 – 08/2010Swift Transportation Costumer Service Claims and Road Service 07/2009 – 04/2010United States Air Force Tactical Aircraft Maintenance / supervisor 11/1989 – 07/2009

EDUCATION

Art Institute of Phoenix Phoenix, AZ Associate Degree as a Graphic Designer with Multimedia, basic 3d design and Web Design.

US Air Force, Luke Air Force Base Glendale, AZResource Conservation and Recovery Act (RCRA) certified - 2007

CompTIA A+ Certification/ Computer Technician Completed:12/ 2011- 12/ 2014