m36 led direct [l36] · pdf filepage 2 of 14 (rev. 09/2017) m36led direct_v[1b]3.2. in a...
TRANSCRIPT
Page 1 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Project:
Type: Qty:
Date: Customer:
M36LED Direct
Custom colors are available, Please consult factory
Order Code: - - - - - -
Emergency Options
Driver
EC17 Emergency Circuit Wiring
DML9,10
eldoLED SOLO-drive 0-10V (Logarithmic)
DMD9,10 eldoLED DALI (Logarithmic)
DCE9,10 Lutron Eco-System
DC39,10 Lutron 3-Wire
DC29,10,11 Lutron 2-Wire
V9018 Lit Inverted 90° Corner
IT9018 Lit “T” section
IX9018 Lit “X” section
IL9018 Lit Horizontal 90° Corner
17See page 8 for full details and restrictions
18See page 10 for full details and restrictions
9See page 7 for full details10Not available for 1’ length
Configuration Options
- - -
Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details.
DL13 Damp Location Rated
FS13 In-line Fuse
SS13 Separate Switching
Fixture Options
13See page 8 for full details and restrictions
LU4,5 Light Up Lens
DR4,5 Drop Lens
VC6 Specular Louver
11120V only
DM9,10 eldoLED SOLOdrive 0-10V (Linear)
DIM9 0-10V (Linear)
Sensor Options
xE14,15 Enlighted
xP114,15 Philips Daylight
xP214,15 Philips Occ/Vac
xP314,15 Philips Occ/Vac/Daylight
xS114,16 Sensor Switch Daylight
xS214,16 Sensor Switch Occ/Vac
xS314,16 Sensor Switch Occ/Vac/Daylight
14 Minimum fixture length 2’. See page 9 for full details and restrictions.
15 For use with SR driver only16 For use with DIM driver only
12For use with E and P sensors only
4Not available with sensors
5I ndividual fixtures only. For Runs and Configurations, please consult factory. See page 8 for details.
6 Not available with IL90, V90, or IX90 Configurations.
Replace “x” with quantity
- - -
VM6 Matte Silver Louver
VB6 Matte Black Louver
VW6 Matte White Louver
xSN nLight Enabled (consult factory)
EMR Remote Micro Inverter (consult factory)
EM Internal EM Battery Pack (consult factory)
DC5 Lutron 5-Series (consult factory)
Series L36 M36 LED Direct
Light Engine 1B451,2,3 908lm/11.8W per foot
1B401,2,3 821lm/10.5W per foot
1B351 722lm/9.2W per foot
1B301,2 617lm/7.7W per foot
CCT 30 3000K
35 3500K
40 4000K
Shielding LW LED Optimized white lens
MI Clear Lensw/microprism
NB LMO Symmetric
A2 LMO Asymmetric 20° Wall Washer
BW LMO Batwing
Mounting FF8 Surface Mount (w/Flex Whip)
C Cable
S Swivel Stem
RS Rigid Stem
W7 Wall Mount
Nominal Fixture Length
01* 1 ft.
02 2 ft.
04 4 ft.
03 3 ft.
05 5 ft.
06 6 ft.
08 8 ft.
07 7 ft.
XX Runs (over 12’) & Configurations, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)
Finish WH White
BK Black
SV Silver
SP Specify Premium Color
Voltage 120120 Volt
277277 Volt
L36
LED WARRANTY
5YEAR
ARRA Compliant
ADA Compliant
L36
27 2700K
F28 Surface Mount (for 2x4J-Box)
F48 Surface Mount (w/4x4 J-Box cover)
7Consult factory for lengths under 2’
8 Over 8’ supplied with 2 or more housings that are joined in the field.
09 9 ft.
11 11 ft.
10 10 ft.
12 12 ft.
UNV120 thru 277 50/60hz capable
A5 LMO Asymmetric 5° Wall Grazer
1 Values calculated from a 4’ fixture @4000K using LW Shielding and DIM driver. For additional information please see page 2.
* 1’ fixture only available with 1B35 light engine
SR9,10,12 Philips Xitanium SR DALI
1B251,2 553lm/6.8W per foot
1B201,2 417lm/5.1W per foot 2 Available starting at 2’ and up.
3 Not available with Lutron.
BL Semi-Matte Black
347347 Volt (consult factory)
Page 2 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Construction:
Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.
Geartray - Low copper 6063-T6 extruded aluminum profile.
Shielding - Extruded, impact resistant acrylic lens:- LED optimized white lens (LW)- Clear lens with microprism inlay (MI)- “LMO” symmetric lens (NB)- “LMO” Asymmetric 5° wall grazer (A5)- “LMO” Asymmetric 20° wall washer (A2)- “LMO” Batwing (BW)- LED optimized Light Up Lens (LU)- LED optimized Drop Lens (DL)- Louvers: (VC) Specular, (VM) Matte Silver, (VB) Matte Black, (VW) Matte White- “LMO” refers to the Selux proprietary LED opti-cal system - Light Modulation Optics.
Mounting(s) - 1/16” Aircraft Cable, Ø1/2” Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details).** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If sym-metrical suspensions are required please consult the factory.
Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Con-figurations are available in approximately 1 1/2” increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field.
Exact length luminaires - Individual lumi-naires, Runs, and Configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length lumi-naires.
M36 Joiner(s) - Runs and Configurations are supplied in multiple housing that are joined together in the field using the supplied M36 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail).
Weight - 1.8 lb per foot
Electrical/Performance:
LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 hours @ 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.
Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% toler-ance. For outputs based on different shielding or CCT please see photometry section at the end.
CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.
CRI - Min. 90.
All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC > 0.90. For more detailed information on the available drivers please see page 7.
Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35° C (95° F) for all drivers.
Luminaires are suitable for minimum ambient temperatures of:-40ºC (-40ºF) for DIM, DM, DML, and DMD drivers.-20ºC (-4ºF) for SR drivers.0ºC (32ºF) for DC2, DC3, and DCE drivers.
Luminaire Finish:
Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.
All products undergo a five stage intensive pretreatment process where product is thor-oughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.
Standard interior colors are White (WH), Black (BK), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M36 series LED lumi-naire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”
Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus; cCSAus)ADA CompliantARRA CompliantRoHS Compliant
M36LED Direct
1 5/16” (34mm)
1 7/16” (37mm)
LOUVERDIFFUSER1/4” (6mm)
1 7/16” (37mm)
Light Up Lens Drop Lens LMO Lens LW lens shown for reference
Louver
2 13/16” (72mm)
Page 3 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Cable Mounting (C)
M36LED Direct
Outlet box for feed only (by others)
L36 Cable (C) Suspension Detail (Feed location(s) only)
L36 Cable (C) Suspension Detail (Non-Feed location(s) only)
Cross bar with 1/4-20 rod and ground screw
1/4” x 5” diameter canopy (white)
2x White cable stay
Cord strain relief bushing
Chrome gripper
1/4”- 20 Threaded Rod (supplied & installed in the field by others)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).
2x Outlet box screws (by others)
1/4-20 Slip ring coupler
Feed cord (white)
1/16” Aircraft cable
Luminaire
1/4-20 Slip ring coupler
1/16” Aircraft cable
Chrome gripper
Luminaire
1/4” x 2” diameter Canopy (white)
Cable Mounting (C) - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0'- 8 1/8" 206 0' - 1 1/8" 29
02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1'- 8 1/16" 509 0' - 1 1/8" 29
03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2'- 6 1/16" 764 0' - 2 1/8" 54
04 (4 ft.) 4' - 1/4" 1225 0' - 3 1/8" 79 3'- 6" 1067 0' - 2 1/8" 54
05 (5 ft.) 4' - 10 11/16" 1491 0' - 3 1/8" 79 4'- 4 7/16" 1332 0' - 2 1/8" 54
06 (6 ft.) 5' - 10 5/8" 1794 0' - 3 1/8" 79 5'- 4 7/16" 1636 0' - 2 1/8" 54
07 (7 ft.) 7' - 1/4" 2140 0' - 3 1/8" 79 6'- 6" 1981 0' - 2 1/8" 54
08 (8 ft.) 8' - 1/4" 2444 0' - 3 1/8" 79 7'- 6" 2286 0' - 2 1/8" 54
09 (9 ft.) 8' - 10 5/8" 2709 0' - 3 1/8" 79 8'- 4 7/16" 2551 0' - 2 1/8" 54
10 (10 ft.) 9' - 10 5/8" 3013 0' - 3 1/8" 79 9'- 4 3/8" 2854 0' - 2 1/8" 54
11 (11 ft.) 11' - 3/16" 3358 0' - 3 1/8" 79 10 - 6" 3200 0' - 2 1/8" 54
12 (12 ft.) 12' - 3/16" 3662 0' - 3 1/8" 79 11'- 5 15/16" 3503 0' - 2 1/8" 54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Cable Mounting (C)
Min. 5/8” to Max. 3/4”
Page 4 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Stem Mounting (S & RS)
Outlet box (supplied & installed by others)
L36 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux)
L36 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux)
Hemispherical assembly
1/4 IP Swivel crossbar with ground screw
3/4” x 5” diameter canopy (white)
1. Ø 1/2” Swivel Stem provides 45° swivel and can be cut in field (48” max. from ceiling to luminaire).
2. Ø 1/2” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).
Cotter pin
1/4 IP steel swivel stem (white)
3/8 Male x 1/4 Male hex bushing
Luminaire Luminaire
Outlet box (supplied & installed by others)
1/4 IP Crossbar with ground screw
1/4 IP Hex nut
1/4” x 5” diameter canopy (white)
Canopy securing screw (white)
1/4 IP Steel rigid stem (white)
3/8 Male x 1/4 Male hex bushing
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1'- 5/16" 313 0' - 2 1/8" 54 0'- 8 1/8" 206 0' - 2 1/8" 54
02 (2 ft.) 2'- 1/4" 616 0' - 2 1/8" 54 1'- 8 1/16" 509 0' - 2 1/8" 54
03 (3 ft.) 3'- 5/16" 923 0' - 3 1/8" 79 2'- 6 1/16" 764 0' - 3 1/8" 79
04 (4 ft.) 4'- 1/4" 1225 0' - 3 1/8" 79 3'- 6" 1067 0' - 3 1/8" 79
05 (5 ft.) 4'- 10 11/16" 1491 0' - 3 1/8" 79 4'- 4 7/16" 1332 0' - 3 1/8" 79
06 (6 ft.) 5'- 10 5/8" 1794 0' - 3 1/8" 79 5'- 4 7/16" 1636 0' - 3 1/8" 79
07 (7 ft.) 7’- 1/4" 2140 0' - 3 1/8" 79 6'- 6" 1981 0' - 3 1/8" 79
08 (8 ft.) 8'- 1/4" 2444 0' - 3 1/8" 79 7'- 6" 2286 0' - 3 1/8" 79
09 (9 ft.) 8'- 10 5/8" 2709 0' - 3 1/8" 79 8'- 4 7/16" 2551 0' - 3 1/8" 79
10 (10 ft.) 9'- 10 5/8" 3013 0' - 3 1/8" 79 9'- 4 3/8" 2854 0' - 3 1/8" 79
11 (11 ft.) 11'- 3/16" 3358 0' - 3 1/8" 79 10 - 6" 3200 0' - 3 1/8" 79
12 (12 ft.) 12'-3/16" 3662 0' - 3 1/8" 79 11'- 5 15/16" 3503 0' - 3 1/8" 79
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Stem Mounting (S & RS)
Page 5 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Wall Mounting (W)
1. Aluminum wall bracket (by Selux)2. 2” x 4” J-Box at feed location (supplied and installed by others).3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to
anchor the wall bracket. Mounting hardware supplied and installed to code by others.
Wall Mount (W) (Covers a 2x4 J-Box only)
Wall (W) Mount - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 6 3/16" 157 N/A 0' - 6 3/16" 157
02 (2 ft.) 2' - 1/4" 616 0' - 3 1/8" 79 1' - 6 1/16" 458 0' - 3 1/8" 79
03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 2' - 1/8" 612 0' - 6 1/8" 156
04 (4 ft.) 4' - 1/4" 1225 0' - 6 1/8" 156 3' - 0" 914 0' - 6 1/8" 156
05 (5 ft.) 4' - 10 11/16" 1491 0' - 6 1/8" 156 3' - 10 7/16" 1180 0' - 6 1/8" 156
06 (6 ft.) 5' - 10 5/8" 1794 0' - 6 1/8" 156 4' - 10 7/16" 1484 0' - 6 1/8" 156
07 (7 ft.) 7' - 1/4" 2140 0' - 6 1/8" 156 6' - 0" 1829 0' - 6 1/8" 156
08 (8 ft.) 8' - 1/4" 2444 0' - 6 1/8" 156 7' - 0" 2133 0' - 6 1/8" 156
09 (9 ft.) 8' - 10 5/8" 2709 0' - 6 1/8" 156 7' - 10 7/16" 2398 0' - 6 1/8" 156
10 (10 ft.) 9' - 10 5/8" 3013 0' - 6 1/8" 156 8' - 10 3/8" 2702 0' - 6 1/8" 156
11 (11 ft.) 11' - 3/16" 3358 0' - 6 1/8" 156 9' - 11 15/16" 3047 0' - 6 1/8" 156
12 (12 ft.) 12' - 3/16" 3662 0' - 6 1/8" 156 10' - 11 7/8" 3350 0' - 6 1/8" 156
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
2 3/4” (70mm)
4” (102mm)
1” (25mm)
2 7/16” (62mm)
Page 6 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Surface Mounting (FF, F2 & F4) - 1’ to 8’
1. 6’ Flex Whip2. Ø 5/16” Mounting hole drilled at the factory(mounting hardware to code by others).3. 2”x 4” J-Box at feed location (supplied and installed by others).4. 2”x 4” J-Box cover (by Selux).5. 4”x 4” J-Box at feed location (supplied and installed by others).6. 4”x 4” J-Box cover (by Selux).
Surface Mount (FF)* (with Flex Whip)
Surface Mounting (FF, F2 & F4) - Over 9’
Surface Mount (F2) (with 2x4 J-Box cover)
Surface Mount (F4) (with 4x4 J-Box cover)
* Please note: Fixture does not cover a J-Box.
Surface Mount (FF, F2, & F4) - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
* “B1” End Suspensions
“C” Mid. Suspension
“C1” Mid. Suspension
“C2” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 1 5/8" 41 N/A 0' - 9 1/8" 231 N/A N/A 0' - 4 1/8" 105
02 (2 ft.) 2' - 1/4" 616 0' - 1 5/8" 41 N/A 1' - 9" 534 N/A N/A 0' - 4 1/8" 105
03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 N/A 2' - 1/8" 612 N/A N/A 0' - 2 1/8" 54
04 (4 ft.) 4' - 1/4" 1225 0' - 6 1/8" 156 N/A 3’ 914 N/A N/A 0' - 2 1/8" 54
05 (5 ft.) 4' - 10 11/16" 1491 0' - 6 1/8" 156 N/A 3' - 10 7/16" 1180 N/A N/A 0' - 2 1/8" 54
06 (6 ft.) 5' - 10 5/8" 1794 0' - 6 1/8" 156 N/A 3' 914 1' - 10 3/8" 569 N/A 0' - 2 1/8" 54
07 (7 ft.) 7' - 1/4" 2140 0' - 6 1/8" 156 N/A 3' 914 3' 914 N/A 0' - 2 1/8" 54
08 (8 ft.) 8' - 1/4" 2444 0' - 6 1/8" 156 N/A 3' 914 4' 1219 N/A 0' - 2 1/8" 54
09 (9 ft.) 8' - 10 5/8" 2709 0' - 6 1/8" 156 6” 153 3' - 10 7/16" 1180 N/A 3' 914 0' - 2 1/8" 54
10 (10 ft.) 9' - 10 5/8" 3013 0' - 6 1/8" 156 6” 153 3' 914 1' - 10 3/8" 569 3' 914 0' - 2 1/8" 54
11 (11 ft.) 11' - 3/16" 3359 0' - 6 1/8" 156 6” 153 3' 914 3' 914 3' 914 0' - 2 1/8" 54
12 (12 ft.) 12' - 3/16" 3662 0' - 6 1/8" 156 6” 153 3' 914 4' 1219 3' 914 0' - 2 1/8" 54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Page 7 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Driver Quantity
1 ft. 2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 10 ft. 11 ft. 12 ft. RUN
DIM, DM, DML, DMD, and SR drivers 1 1 1 1 1 1 2 2 2 2 3 3 Approximately 1 driver per 4 ft.
DC2, DC3, & DCE drivers N/A 1 1 1 2 2 2 3 3 3 3 3 Consult Factory
Drivers:
0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size con-straints, 1’ luminaires are supplied with a driver from a different manufac-turer than 2’ and above luminaires. For details, please consult factory).
eldoLED SOLOdrive 0-10V linear dimming (DM)Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dim-ming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
eldoLED SOLOdrive 0-10V logarithmic dimming (DML)Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
eldoLED SOLOdrive DALI dimming (DMD)Luminaires supplied with SOLOdrive DALI dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
* For control recommendations for eldoLED drivers, please consult eldoLED.
LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-Lume 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON 3-wire dimming (DC3)Luminaires supplied with Hi-Lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON Ecosystem dimming (DCE)Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dim-ming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
* For control recommendations and system layout for Lutron drivers, please contact Lutron.
Philips Xitanium Sensor Ready DALI dimming (SR)Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 5%. For use with E and P sensors only.
*For inrush and control current, please refer to the driver manufacturers’ spec sheets.
Wiring Diagrams Sensor Wiring Diagrams
ENLIGHTEDOR PHILIPSSENSOR
ELDO 0-10V
SENSORSWITCH
PHILIPS XR
SR (+)SR (-)
(+)(-) 0-10V AUX (+)
AUX (-)
standard0-10V linear (DIM) 0-10V linear eldoLED SOLOdrive (DM)0-10V logarithmic eldoLED SOLOdrive (DML)DALI eldoLED SOLOdrive (DMD)Philips SR DALI (SR)
DIM, DM, DML, DMD & SR
DALIDALI
Page 8 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing.
*For Damp Location with sensors, please consult factory.
Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is in-tended to be wired to the same panel/breaker (not intended for Emer-gency use).
- To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.
*If the project requires different separate switching than outlined above please consult the factory.
*For Separate Switching with sensors, please consult factory.
Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use.
- For 1’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.
- For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).
*If a different configuration is needed please consult the factory.
*For EC with sensors, please consult factory.
90° Elbow on top of the housing (7/8" feed hole)
3/8" flexible metal conduit (6' long)
6" leads
Straight fitting
Flex Whip - standard for FF mounting Joiner System - standard for Runs and Configurations
Fixture extrusion
Joiner extrusion
Recommended #2 Phillips drive
Fixture extrusion
Additional view
Light Up or Drop Lens Detail
Light Up or Drop Lens
Housing
Light Up Lens 6mm Drop Lens 37mm
Page 9 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Lens
3” (76mm)
Qty 1 Sensor - Beginning
1 7/16” (37mm)Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer.
Beginning of Run
M36LED Direct
Occupancy Vacancy Daylight Harvesting Driver Compatibility
Enlighted FS-D22 (E) See Enlighted’s website for full capabilities SR
Philips EasySense SNS102 (P) √ √ √ SR
Sensor Switch MSD EZ (S) √ √ √ DIM
Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming.
Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.
Sensor Ordering Chart
Quantity Sensor Settings*
x Number of Sensors E Enlighted FS-D22
P Philips Easy Sense SNS102
S Sensor Switch MSD EZ
1 Daylight
2 Occupancy/Vacancy
3 Daylight/Occupancy/Vacancy
* Settings not available with Enlighted
Fixture LengthLit Section*
Enlighted FS-D22 (E)Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D22 spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. *Please contact Enlighted for complete details prior to specifying. *Sensor can control up to 4 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Philips EasySense SNS102 (P)Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS102 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra (www.illumra.com/easysense). **Please contact Philips for complete details prior to specifying. *Sensor can control up to 10 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Sensor Switch MSD EZ (S)Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoLED 0-10V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. *Please contact Sensor Switch for complete details prior to specifying.*Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above.
Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise
Qty 2 Sensor - Beginning and End (9’ fixtures and longer)
Notes: 1. For spacing between sensors, please consult the sensor manufacturer. 2. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout.
* Lit section will be the fixture length minus 3” for sensor plate.
Page 10 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory.
The minimum standard lengths for “L” shapes:- IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)- IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)( Exception is that the IL90 & V90’s can be joined directly to provide a 4’ x 4’ nominal shape).
*For sensors in configurations, please consult factory.
Standard Direct shapes/configurations:
The minimum standard lengths for “T” & “X” shapes:- IT90 = 4’ nominal on the short leg and 8’ nominal on the long side- IX90 = 8’ nominal for either direction
Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Project Specific Direct shapes/configurations:
"B" Housing
"B"
Hou
sing
"B1" Housing
"B1"
Hou
sing
"E" Housing
"E"
Hou
sing
"E1"
Ref
.
"E1" Ref."C" Housing
"D"
Hou
sing
"D1"
Ref
.
"C1" Ref.
"A" Housing
"A"
Hou
sing
"A1" Housing
"A1"
Hou
sing
IL90 - Lit Horizontal corner
V90 - Lit Inside corner
IT90 - Lit "T" section IX90 - Lit "X" section
BottomView
BottomView
BottomView
SideView
Direct Lit Corner and Section - Dimensions
IL90 V90 IT90 IX90
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
“A” Housing (Outside) 2' - 13/16" 631
“A1” Housing (Inside) 1' - 11 3/8" 594
“B” Housing (Outside) 2' - 2 5/16" 669
“B1” Housing (Inside) 1' - 11 1/2" 597
“C” Housing 2' - 13/16" 631
*“C1” Ref. 2' - 1/8" 612
“D” Housing 4' - 3/16" 1224
* “D1” Ref. 2' - 1/8" 612
“E” Housing 4' - 3/16" 1224
* “E1” Ref. 2' - 1/8" 612
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Page 11 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
259
517
776
1034
1
2
Maximum Candela = 1034 Located At Horizontal Angle = 90, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
LW Optics / 36W LED / 4000K CCT
M36LED Direct
Photometry
447
893
1340
1786
1
2
Maximum Candela = 1786 Located At Horizontal Angle = 90, Vertical Angle = 9.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
MI Optics / 36W LED / 4000K CCT
Catalog #: L36-1B35-40-MI-X-04-XX-UNVReport #: 11684969.03 Delievered Lumens: 2950 Input Watts: 36.64WEfficacy: 81 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 1786 @ 9.5° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 1.02 Spacing Criterion (Diagonal): 1.08
Catalog #: L36-1B35-40-LW-X-04-XX-UNVReport #: 11684969.01 Delievered Lumens: 2887 Input Watts: 36.74WEfficacy: 79 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 1034 @ .5° from VerticalSpacing Criterion (0-180): 1.24 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38
381
761
1142
1522
1
2
Maximum Candela = 1522 Located At Horizontal Angle = 90, Vertical Angle = 6.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
NB Optics / 36W LED /4000K CCT
Catalog #: L36-1B35-40-NB-X-04-XX-UNV Report #: 11684969.05 Delievered Lumens: 3529 Input Watts: 36.67WEfficacy: 96 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 1522 @ 6.5° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 1.14 Spacing Criterion (Diagonal): 1.26
Page 12 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Photometry
A2 Optics / 36W LED / 4000K CCT
A5 Optics / 36W LED / 4000K CCT
Catalog #: L36-1B35-40-A5-X-04-XX-UNVReport #: 11684969.06 Delievered Lumens: 3660 Input Watts: 36.73WEfficacy: 95 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 2219 @ 3° from VerticalSpacing Criterion (0-180): 1.10 Spacing Criterion (90-270): 0.84 Spacing Criterion (Diagonal): 1.00
BW Optics / 36W LED / 4000K CCT
Catalog #: L36-1B35-40-BW-X-04-XX-UNVReport #: 11684969.04 Delievered Lumens: 3193 Input Watts: 36.65WEfficacy: 87 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 1388 @ 40.5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 2.36 Spacing Criterion (Diagonal): 1.98
347
694
1041
1388
1
2
Maximum Candela = 1388 Located At Horizontal Angle = 90, Vertical Angle = 40.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
555
1110
1664
2219
12
Maximum Candela = 2219 Located At Horizontal Angle = 90, Vertical Angle = 3# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
621
1241
1862
2482
1
2
Maximum Candela = 2482 Located At Horizontal Angle = 0, Vertical Angle = 20# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
Catalog #: L36-1B35-40-A2-X-04-XX-UNVReport #: 11684969.07 Delievered Lumens: 3647 Input Watts: 36.69W Efficacy: 99 Power Factor: 0.990 Total Harmonic Distortion: 4.63 CCT: 3982KCRI: 83.9Max Candela: 2482 @ 20° from VerticalSpacing Criterion (0-180): 1.66 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.44
Page 13 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
M36LED Direct
LU Optics / 36W LED / 4000K CCT
Catalog #: L36-1B35-40-LU-X-04-XX-UNVReport #: 11684993.02 Delievered Lumens: 3102 Input Watts: 38.04WEfficacy: 82 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 1002 @ 1° from VerticalSpacing Criterion (0-180): 1.26 Spacing Criterion (90-270): 1.26 Spacing Criterion (Diagonal): 1.38
DR Optics / 36W LED / 4000K CCT
Catalog #: L36-1B35-40-DR-X-04-XX-UNVReport #: 11684993.01 Delievered Lumens: 3422 Input Watts: 37.95WEfficacy: 90 Power Factor: 0.989 Total Harmonic Distortion: 10.1 CCT: 3896KCRI: 95.7Max Candela: 600 @ 26.5° from VerticalSpacing Criterion (0-180): 1.26 Spacing Criterion (90-270): 1.62 Spacing Criterion (Diagonal): 1.62
150
300
450
600
1
2
Maximum Candela = 600.1 Located At Horizontal Angle = 90, Vertical Angle = 26.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
251
501
752
1002
1
2
Maximum Candela = 1002 Located At Horizontal Angle = 0, Vertical Angle = 1# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
Page 14 of 14 (Rev. 09/2017)
M36LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M36LED Direct
Photometry
CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine).
Light engine multiplier supplied for per foot values listed on page one (light engine).
4000K3500K3000K2700K
LightEngine Lumens Wattages1B45 1.258 1.2851B40 1.137 1.1401B35 1.000 1.0001B30 0.855 0.8381B25 0.766 0.7401B20 0.578 0.552
LWMINBA2A5BWLUDRVWVMVCVB 0.000
L36LEDDirectPhotometryMultiplierTable
CCTMultiplier
LightEngineMultiplier
1.0000.9720.9630.931
1.0221.2221.2681.2631.1061.0741.1850.0000.0000.000
LensMultiplier1.000