m9720/m9740 - acuity brands · hydrel’s m9720/m9740 series modular in-grade lights are multi- ......
TRANSCRIPT
©2014-2017 Acuity Brands Lighting, Inc.03/20/17
M9720_M9740
9144 Deering Avenue | Chatsworth, CA 91311Phone: 866.533.9901 | www.hydrel.com
ORDERING INFORMATION (60HZ) EXAMPLE: M9720 A 70CMT6 MVOLT NSP FLC10 34B ISS LP BZ
DESCRIPTIONHydrel’s M9720/M9740 Series modular in-grade lights are multi-purpose units designed for up-lighting of architectural and landscape features. These adjustable units can be flushed mounted into a variety of substrates or landscape materials. The M9720/M9740 consists of a factory-sealed, thermally protected lamp module and encapsulated power module. The components are secured inside a heavy-duty polymer rough-in housing designed with channeled convective cooling, an integral junction box, and finish door trim assembly. These double lens units offer lamp module aiming, featuring Aim-Lock™ adjustment to allow for maintenance and re-lamping without re-aiming.
CATALOG NUMBER
NOTES
TYPE
Notes:1. Incandescent models available with 120 Volt only.2. MVOLT is standard on all fluorescent lamps. 3. All metal halide lamps are supplied with MVOLT GEB electronic ballast, except for 347 volt .4. NSP only available with T4 or T6 lamps.5. Not available with T6 lamps or E17 lamps.6. PAR 38 lamps only available with SP or FL distributions.7. FLC5 lens recommended with WWD distribution.8. Meets ADA requirements for coefficient of friction. 9. Not available with FLC10.10. ISS not available with WWD distribution, fluorescent or P38 lamp type.
M9720/M9740Modular In-Grade LuminaireDouble Lens
Model Door Material Lamp Type Voltage Distribution6 Lens
M9720 Round
M9740 Square
A Aluminum
B Bronze
SS Stainless Steel
INCANDESCENT1 MH3 HPS
P3883I PAR38, Med. 35CMT6 T6, G-12 50S E17, Med.
100Q T4 150CMT6 T6, G-12 100S E17, Med.
150Q T4 50M E17, Med. 150S E17, Med.
250Q T4 70M E17, Med.
FLUORESCENT2 70CM E17, Med.
18TRT Triple Tube, GX24q2 100M E17, Med.
26TRT Triple Tube, GX24q3 100CM E17, Med.
32TRT Triple Tube, GX24q3 150M E17, Med.
42TRT Triple Tube, GX24q3 150CM E17, Med.
P3870M PAR38, Med.
P3870CM PAR38, Med.
P38100M PAR38, Med.
P38100CM PAR38, Med.
P38150M PAR38, Med.
P38150CM PAR38, Med.
120
208
240
277
347
MVOLT
NSP4 Narrow Spot
SP Spot
NFL Narrow Flood
MFL Medium Flood
FL5 Flood
WFL Wide Flood
WWD7 Wall Wash Distribution
FLC Flat Lens Clear
FLC5 Flat Lens Clear, 5º Axial Spread
FLC10 Flat Lens Clear, 10º tilt
FLC20 Flat Lens Clear, 20º tilt
FLF Flat Lens Frosted
FLCAS Flat Lens Clear, Anti-Slip
FLC5AS Flat Lens Clear, 5º Axial Spread, Anti-Slip
Lens (cont.) Conduit Entries Accessories Options Lamp Finish16
FLCSR8 Flat Lens Clear Slip Resistant
FLC5SR8 Flat Lens Clear, 5º Axial Spread, Slip Resistant
FLC10SR8 Flat Lens Clear, 10º tilt, Slip Resistant
FLC20SR8 Flat Lens Clear, 20º tilt, Slip Resistant
CLC Convex Lens, Clear
CLF Convex Lens, Frosted
12B 1/2” NPT Bottom
12S 1/2” NPT Side
34B 3/4” NPT Bottom
34S 3/4” NPT Side
Internal Trim Ring11
IHL9 Honeycomb Louver BTR Brass Round
ISS10 Source Shield BTS Brass Square
LSF9 Linear Spread Filter STR Stainless Round
CFAMB9 Color Filter Amber STS Stainless Square
CFBLU9 Color Filter Blue Rings & Masks
CFGRN9 Color Filter Green PRR Protective Ring Round
CFRED9 Color Filter Red PRS Protective Ring Square
WWL Wall Wash Louver GM Grout Mask
External11
GS Glare Shield
LC Lexan Cover
LS Light Shield
RG12 Rock Guard
PC2112 Potting Compound
Fusing
SF13 Single Fuse
DF14 Double Fuse
Ballasting
GEB Electronic Ballast
LDIM15 0-10 Dimming
LP Lamp Included
BL Black
BZ Bronze
DDB Dark Bronze
DNA Natural Alum.
GN Green
GR Gray
SND Sand
STG Steel Gray
TVG Terra Verde Green
WH White
__Z17 Zinc Undercoat (i.e. BLZ)
Specifications
L: 12”305 mm
W: 12”305 mm
H: 16”407 mm
Suitable For Wet Locations11. These accessories are not available with the SS door.12. RG are not available with CLC or CLF lenses.13. SF is only available with 120, 277 or 347 volts on HID only.14. DF is only available with 208, 220 or 240 volts on HID only.15. LDIM available with 26TRT, 32TRT, & 42TRT lamps, 0-10 Volt dimming.16. Finishes are only available on the Aluminum doors.17. Add Zinc undercoat for harsh environments.
©2014-2017 Acuity Brands Lighting, Inc.03/20/17
M9720_M9740
9144 Deering Avenue | Chatsworth, CA 91311Phone: 866.533.9901 | www.hydrel.com
DOOR MATERIAL: Cast Aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert or Stainless Steel. Available in round or square door trim.
ROUGH-IN SECTION: Injection molded polymer with integral junction box for thru- branch wiring. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environments. The rough-in houses the lamp and power module components and top door finishing section.
LAMP MODULE: Stainless steel housing, factory-sealed and purged of all moisture for longer component life. The lamp module is suspended below the top door lens in a surface adjustable, 15° tilt mechanism. The insulating air layer helps to reduce surface temperatures. Active optical lenses are also available. Lens is sealed with silicone gasket and stainless steel clamp band assembly with single fastener. Electrical connection to lamp module is done through a submersible quick pull plug connector with gold-plated contacts. Unit is thermally protected. LAMP INCLUDED.
LAMP TYPE: Incandescent: PAR38 or T4 quartz halogen, 250W max. Fluorescent: Compact fluorescent, 42 Watt max. HID: T6 or E17, 150 Watt max. If a specific lamp is desired, specify manufacturer’s lamp number. Most lamps can be supplied. LAMP INCLUDED.
VOLTAGE: See ordering guide.
DISTRIBUTIONS: See ordering guide.
FINISHING SECTION: Double lens design includes door assembly with 360° Aim-LockTM lamp module support and tilt ring. Module indexing provides easy maintenance and relamping without re-aiming. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners.
POWER MODULE: Ballast is encapsulated in a custom designed heatdissipating epoxy resin that also eliminates all moisture intrusion to the ballast. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module. Standard ballast is high power factor; fluorescent electronic or HID magnetic.
CONDUIT ENTRIES: Two (2) bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 in3 (410 ccm)
ACCESSORIES: See Ordering Guide.
FINISH: Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted. See ordering guide.
LISTING: U.L., C.E.
WARRANTY: 1-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
FEATURES & SPECIFICATIONS
M9700 Series Assembly consists of the
following individual components parts
MRIS97 Rough-In Housing
MFS97 Finishing Section
MACL Lamp Module
MHSL97 Power Module
ORDERING INFORMATION (50HZ) EXAMPLE: M9720 SS 70CMT6 MVOLT NSP FLC10 16B ISS LP IEC
Notes:1. All metal halide lamps are supplied with MVOLT GEB electronic ballast.2. PAR 38 lamps only available with SP or FL distributions.3. NSP only available with T4 or T6 lamps.4. Not available with T6 lamps.5. FLC5 lens recommended with WWD distribution.6. Meets ADA requirements for coefficient of friction.
Model Door Material Lamp Type Voltage Distribution2 Lens
M9720 Round
M9740 Square
A Aluminum
B Bronze
SS Stainless Steel
INCANDESCENT MH1
P3883I PAR38, E27 35CMT6 T6, G-12
100Q Tubular, B15d 150CMT6 T6, G-12
150Q Tubular, B15d 70M Ellip., E27
250Q Tubular, B15d 70CM Ellip., E27
FLUORESCENT 100M Ellip., E27
18TRT Triple Tube, GX24q2
100CM Ellip., E27
26TRT Triple Tube, GX24q3
150M Ellip., E27
32TRT Triple Tube, GX24q3
150CM Ellip., E27
42TRT Triple Tube, GX24q3
HPS
70S Ellip., E27
22050HZ
23050HZ
24050HZ
MVOLT
NSP3 Narrow Spot
SP Spot
NFL Narrow Flood
MFL Medium Flood
FL4 Flood
WFL Wide Flood
WWD5 Wall Wash Distribution
FLC Flat Lens Clear
FLC5 Flat Lens Clear, 5º Axial Spread
FLC10 Flat Lens Clear, 10º tilt
FLC20 Flat Lens Clear, 20º tilt
FLF Flat Lens Frosted
FLCAS Flat Lens Clear, Anti-Slip
FLC5AS Flat Lens Clear, 5º Axial Spread, Anti-Slip
FLCSR6 Flat Lens Clear Slip Resistant
FLC5SR6 Flat Lens Clear, 5º Axial Spread, Slip Resistant
FLC10SR6 Flat Lens Clear, 10º tilt, Slip Resistant
FLC20SR6 Flat Lens Clear, 20º tilt, Slip Resistant
CLC Convex Lens, Clear
CLF Convex Lens, Frosted
Conduit Entries Accessories Options Lamp Finish11 Listing
16B PG16 Bottom
16S PG16 Side
20B M20 Bottom
20S M20 Side
Internal Trim Ring9
IHL7 Honeycomb Louver BTR Brass Round
ISS8 Source Shield BTS Brass Square
LSF7 Linear Spread Filter STR Stainless Round
CFAMB7 Color Filter Amber STS Stainless Square
CFBLU7 Color Filter Blue Rings & Masks
CFGRN7 Color Filter Green PRR Protective Ring Round
CFRED7 Color Filter Red PRS Protective Ring Square
WWL Wall Wash Louver GM Grout Mask
External9
GS Glare Shield
LC Lexan Cover
RG10 Rock Guard
PC2112 Potting Compound
Ballasting
GEB Electronic Ballast
LP Lamp Included
BL Black
BZ Bronze
DDB Dark Bronze
DNA Natural Alum.
GN Green
GR Gray
SND Sand
STG Steel Gray
TVG Terra Verde Green
WH White
__Z12 Zinc Undercoat (i.e. BLZ)
IEC International Electro-technical Commission
Suitable For Wet Locations7. Not available with FLC10.8. ISS not available with WWD distribution, fluorescent or or P38 lamp type.9. These accessories are not available with the SS door.10. RG not available with CLC or CLF lenses11. Finishes are only available on the Aluminum doors.12. Add Zinc undercoat for harsh environments.