machine for lh 30 c industrial applications -...
TRANSCRIPT
TB_LH30C_enUS.indd 12 15.10.13 08:30
Operating Weight: 62,500 – 69,100 lbEngine Output (SAE J1349): 173 HP / 129 kWEngine Output (ISO 9249): 175 HP / 129 kW
LH 30 Clitronic̀
Machine for Industrial Applications
2 LH 30 C Litronic Machine for Industrial Applications
Technical Data
EngineRating per SAE J1349 �������������� 173 HP (129 kW) at 1,800 rpmRating per ISO 9249 ���������������� 175 HP (129 kW) at 1,800 rpmModel ������������������������������� Liebherr D934 according to stage IIIB / Tier 4iType ��������������������������������� 4 cylinder in-line Bore/Stroke ������������������� 4.8/5.9 in Displacement ����������������� 427,17 in3
Engine operation ������������������� 4-stroke diesel Common-Rail turbo-charged and after-cooled reduced emissions
Harmful emissions values ���������� in accordance with EPA/CARB-40CFR stage Tier 4 interimEmission control �������������������� Liebherr particle filterCooling ������������������������������ water-cooled with integrated motor oil coolerAir cleaner ��������������������������� dry-type air cleaner with pre-cleaner, primary
and safety elementsFuel tank ���������������������������� 127 galEngine idling ������������������������ sensor controlledElectrical system Voltage ������������������������ 24 V Batteries ����������������������� 2 x 135 Ah/12 V Alternator ���������������������� three phase current 28 V/100 A
Hydraulic SystemHydraulic pump for attachment and travel drive ��������������� two Liebherr variable flow, swashplate pumps (double
construction) Max. flow ���������������������� 2 x 57 gpm Max. pressure ����������������� 5,076 psiHydraulic pumpregulation and control �������������� Liebherr-Synchron-Comfort-system (LSC) with elec-
tronic engine speed sensing regulation, pressure and flow compensation, load sensing and torque controlled swing drive priority
Hydraulic tank ���������������������� 50 galHydraulic system ������������������� 114 galHydraulic oil filter ������������������� 1 main return filter with integrated partial micro filtration
(5 µm)Hydraulic oil cooler ����������������� compact cooling system consisting cooling unit for
water, hydraulic oil and charge air with stepless thermostatically controlled fan
MODE selection �������������������� adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for espe-cially economical and environmentally friendly opera tion or for maximum material handling and heavy-duty jobs
S (Sensitive) ������������������� for precision work and lifting through very sensitive movements
E (ECO) ������������������������ for especially economical and environmentally friendly operation
P (Power) ���������������������� for maximum digging power and heavy duty jobs P+ (Power-Plus) ��������������� for highest performance and for very heavy duty
applications, suitable for continuous operationEngine speed andperformance setting ���������������� stepless alignment of engine output and hydraulic
power via engine speedTool Control (Option) ��������������� ten preadjustable pump flows and pressures for add on
tools
Hydraulic ControlsPower distribution ������������������ via control valve with integrated safety valves, simulta-
neous and independent operation of travel drive, swing drive and work
Servo circuit Attachment and swing �������� with hydraulic pilot control and proportional joystick
levers Travel �������������������������� with proportionally functioning foot pedals or adjusted
with a plugable leverAdditional functions ���������������� via switch or electroproportional foot pedalsOption ������������������������������� proportional control, proportionally acting transmitters
on the joysticks for additional hydraulic functions
Swing DriveDrive ��������������������������������� Liebherr swashplate motor with torque control and
integrated brake valveTransmission ����������������������� Liebherr planetary reduction gearSwing ring �������������������������� Liebherr, sealed single race ball bearing swing ring,
internal teethSwing speed ������������������������ 0 – 8 rpm steplessSwing torque ����������������������� 55,317 lbf ftBrake �������������������������������� holding brake (spring applied – pressure released)Option ������������������������������� pedal controlled positioning swing brake
UppercarriageType ��������������������������������� slewing platform made from high-strength steel plate,
designed for the toughest requirements
Operator’s CabCab ���������������������������������� safety cab structure with individual windscreens or
featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspen-sion, sounddamping insulating, tinted laminated safety glass, separate shades for the sunroof window and windscreen
Operator’s seat Standard ���������� air cushioned operator’s seat with headrest, lap belt, seat heater, manual weight adjustment, adjustable seat cushion inclination and length and mechanical lumbar vertebrae support
Operator’s seat Comfort(Option) ������������������������������ in addition to operator’s seat standard: lockable hori-
zontal suspension, automatic weight adjustment, adjust able suspension stiffness, pneumatic lumbar vertebrae support and passive seat climatisation with active coal
Operator’s seat Premium(Option) ������������������������������ in addition to operator’s seat comfort: active elec tronic
weight adjustment (automatic readjustment), pneumatic low frequency suspension and active seat climatisation with active coal and ventilator
Control system ��������������������� joysticks with arm consoles and swivel seatOperation and displays ������������ large high-resolution operating unit, selfexplanatory,
colour display with touchscreen, video-compatible, numerous setting, control and monitoring options, e.g. air conditioning control, fuel consumption, machine and tool parameters
Air-conditioning ��������������������� automatic air-conditioning, recirculated air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; recirculated air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme out-side temperatures, sensors for solar radiation, inside and outside temperatures
Noise emissionISO 6396 ���������������������������� LpA (inside cab) = 71 dB(A)2000/14/EC ������������������������� LWA (surround noise) = 102 dB(A)
UndercarriageVersions ����������������������������� EW, LCType ��������������������������������� torsion-resistant box design made from high-strength
steel plate, designed for the toughest requirementsDrive ��������������������������������� per side of undercarriage one Liebherr swashplate
motor with brake valves acting on both sidesTravel speed ������������������������ 0 – 2.5 mph stepless EW-Undercarriage 0 – 2.9 mph stepless LC-Undercarriage 0 – 1.9 mph stepless (creeper speed) EW-Undercarriage 0 – 1.9 mph stepless (creeper speed) LC-UndercarriageTrack components ����������������� B 60, maintenance-freeTrack pads �������������������������� triple grouserHolding brake ����������������������� wet, maintenance-free multi disc brakes
AttachmentType ��������������������������������� high-strength steel plates at highlystressed points
for the toughest requirements. Complex and stable mountings of attachment and cylinders
Hydraulic cylinders ����������������� Liebherr cylinders with special seal system. Shock absorption
Bearings ���������������������������� sealed, low maintenance
Complete MachineLubrication �������������������������� central lubrication system for uppercarriage and
attachment, automatically
LH 30 C Litronic Machine for Industrial Applications 3
Dimensions EW
Choice of Cab Elevation EWCab Elevation LFC (Rigid Elevation)
Cab Elevation LHC (Hydraulic Elevation)
Increase Type LFC 80 LFC 120 LFC 150
Height 2’7” 3’11” 4’11”
B 11’4” 12’ 8” 13’ 8”C 13’1” 14’ 5” 15’ 5”D 2’8” 2’ 8” 2’ 8”
A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be removed and replaced by a transport device. The dimension C is in this machine design for all rigid cab elevations 11’6”.
Increase Type LHC 255B1 8’ 9”B2 17’ 1”C1 10’ 6”C2 18’10”D1 4’ 6”D2 4’11”E 10’ 4”
The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke.
US_H0417
8'6"
8'6"
13'5"
2'6"
3'5"
1'7"
2'
12'6"
14'5"
14'11"
4'2"
9'6"
14'9"
7'6"
18'6"
17'7"
18'3"
10'6"
D
BC
H0418
B1C1
B2C2
E
D1D2
4 LH 30 C Litronic Machine for Industrial Applications
Choice of Cab Elevation LCCab Elevation LFC (Rigid Elevation)
Cab Elevation LHC (Hydraulic Elevation)
Dimensions LC
Increase Type LFC 80 LFC 120 LFC 150
Height 2’ 7” 3’11” 4’11”
B 11’ 1” 12’ 5” 13’ 4”C 12’10” 14’ 2” 15’ 2”D 2’ 8” 2’ 8” 2’ 8”
A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be removed and replaced by a transport device. The dimension C is in this machine design for all rigid cab elevations 11’3”.
Increase Type LHC 255B1 8’ 5”B2 16’10”C1 10’ 3”C2 18’ 7”D1 4’ 6”D2 4’11”E 10’
The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke.
US_H0419
8'2"
8'6"
11'3"
2'6"
3'3"
1'7"
2'
7'10"
9'10"
10'3"
3'11"
9'11"
12'7"
6'3"
18'11"
15'2"
17'6"
10'3"
D
BC
H0418
B1C1
B2C2
E
D1D2
LH 30 C Litronic Machine for Industrial Applications 5
Attachment AF10Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type angled mono boom 21’4”, industrial-type flat angled stick 13’1” and clamshell model GM 20B/1.70 yd3 shells for loose material.
Undercarriage EWPad width in 24”Weight lb 67,700 Ground pressure on request
Dimensions
Industrial Stick 13’1” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
17,4* 17,4* 15,3* 15,3* 16’ 4” 20,7* 20,7* 17,8* 17,8* 13,0* 13,0* 23’ 2” 20,6* 20,6* 17,6* 17,6* 15,5* 15,5* 12,2* 12,2* 27’ 6” 22,0* 22,0* 18,2* 18,2* 15,6* 15,6* 13,1* 13,1* 11,9* 11,9* 30’ 5” 35,3* 35,3* 24,7* 24,7* 19,4* 19,4* 16,1* 16,1* 13,7* 13,7* 12,0* 12,0* 32’ 4” 17,7* 17,7* 27,7* 27,7* 20,6* 20,6* 16,6* 16,6* 13,6 13,7* 11,6 12,1* 33’ 2” 6,0* 6,0* 29,0* 29,0* 21,2* 21,2* 16,7* 16,7* 13,3 13,5* 11,4 11,4* 33’ 5” 9,0* 9,0* 25,2* 25,2* 20,6* 20,6* 16,1* 16,1* 12,6* 12,6* 10,6* 10,6* 32’10” 23,4* 23,4* 18,4* 18,4* 14,4* 14,4* 10,7* 10,7* 9,5* 9,5* 31’ 5”
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
30
35
25
20
15
10
5
0
-5
-10
-15
8
10
12
11
9
7
H0446
35 30 25 20 15 10 5 0
1112 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6mft m
ft
32'8"22'6"
US_H0447
9'10'6"
6 LH 30 C Litronic Machine for Industrial Applications
Attachment AF10
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type angled mono boom 21’4”, industrial-type flat angled stick 13’1” and clamshell model GM 10B/1.31 yd3 shells for loose material.
Undercarriage LCPad width in 24”Weight lb 63,700Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 13’1” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 LC 40 LC 35 LC 30 LC 25 LC 20 LC 15 LC 10 LC 5 LC 0 LC – 5 LC – 10 LC
16,7* 16,7* 15,6* 15,6* 15’ 8” 20,7* 20,7* 17,1 17,8* 13,1* 13,1* 22’11” 20,6* 20,6* 17,2 17,5* 12,0 15,5* 10,4 12,2* 27’ 4” 21,9* 21,9* 16,8 18,1* 11,9 15,6* 8,8 12,7* 8,7 11,9* 30’ 4” 34,8* 34,8* 24,5* 24,5* 16,1 19,3* 11,5 16,1* 8,7 13,4 7,8 12,0 32’ 2” 21,2* 21,2* 23,0 27,5* 15,2 20,5* 11,1 16,5* 8,5 13,1 7,3 11,3 33’ 2” 6,0* 6,0* 21,2 29,0* 14,4 21,2* 10,6 16,7* 8,2 12,9 7,1 11,0 33’ 5” 8,7* 8,7* 20,2 25,5* 13,7 20,7* 10,2 16,1* 8,0 12,6 7,1 10,7* 32’11” 19,9 23,7* 13,4 18,6* 10,0 14,5* 8,0 10,9* 7,5 9,6* 31’ 7”
30
35
25
20
15
10
5
0
-5
-10
-15
8
10
12
11
9
7
H0432
35 30 25 20 15 10 5 0
12 11 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6mft m
ft
33'22'10"
US_H0424
8'8"10'3"
LH 30 C Litronic Machine for Industrial Applications 7
Attachment GA10
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with rigid cab elevation, industrial-type straight mono boom 19’, industrial-type angled stick 13’1” and grapple model GM 65/0.78 yd3 semi-closed tines.
Undercarriage LCPad width in 24”Weight lb 62,500Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 13’1” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 LC 40 LC 35 LC 30 LC 25 LC 20 LC 15 LC 10 LC 5 LC 0 LC – 5 LC – 10 LC
23,1* 23,1* 19,7* 19,7* 11’11” 22,6* 22,6* 15,8* 15,8* 14,4* 14,4* 20’ 6” 23,0* 23,0* 16,8 19,6* 11,8 14,1* 11,5 12,8* 25’ 5” 23,7* 23,7* 16,7 19,8* 11,8 16,9* 9,5 12,1* 28’ 7” 29,5* 29,5* 25,1 25,8* 16,2 20,6* 11,6 17,1* 8,8 13,3 8,5 11,9* 30’ 7” 43,3* 43,3* 23,6 28,6* 15,5 21,6* 11,3 17,3 8,7 13,2 8,0 12,1* 31’ 8” 12,0* 12,0* 22,1 30,1* 14,8 22,0* 10,9 16,9 8,5 13,0 7,8 11,4* 31’11” 11,3* 11,3* 21,2 28,3* 14,3 20,9* 10,7 16,0* 8,4 11,5* 8,0 9,9* 31’ 4” 20,9 23,3* 14,1 17,8* 10,5 13,3* 9,0 1,0* 28’ 5”
30
35
25
20
15
10
5
0
-5
-10
-15
8
10
12
11
9
7
H0440
35 30 25 20 15 10 5 0
11 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6mft m
ft
30'10"18'4"
US_H0441
7'10"
8 LH 30 C Litronic Machine for Industrial Applications
Attachment GK10
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type straight mono boom 19’, industrial-type stick with tipping kinematics 13’1” and sorting grab SG 25/0.72 yd3 tines.
Undercarriage LCPad width in 24”Weight lb 63,600Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 13’1” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 LC 40 LC 35 LC 30 LC 25 LC 20 LC 15 LC 10 LC 5 LC 0 LC – 5 LC – 10 LC
26,4* 26,4* 20,4* 20,4* 13’ 4” 23,3* 23,3* 16,0 18,3* 14,2 14,6* 21’ 4” 22,4* 22,4* 16,3 18,9* 11,2 16,2* 10,4 12,6* 26’ 23,1* 23,1* 16,2 19,1* 11,3 16,2* 8,6 11,7* 29’ 1” 23,3* 23,3* 24,6 25,1* 15,7 19,9* 11,0 16,5* 8,2 12,8 7,7 11,3* 31’ 1” 42,6* 42,6* 23,1 27,9* 15,0 20,9* 10,7 16,7* 8,1 12,7 7,2 11,3* 32’ 2” 6,3* 6,3* 21,5 29,3* 14,2 21,3* 10,3 16,4 7,9 12,5 7,1 10,0* 32’ 5” 7,4* 7,4* 20,5 27,5* 13,7 20,2* 10,0 15,2* 7,8 10,8* 7,2 8,3* 31’11” 20,1 22,5* 13,4 17,1* 9,9 12,5* 8,4 9,3* 28’ 5”
30'10"18'6"
US_H0434
7'7"10'3"
30
35
40
45
25
20
15
10
5
0
-5
-10
-15
8
11
12
13
14
9
10
7
H0435
3540 30 25 20 15 10 5 0
13 1112 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
mft m
ft
LH 30 C Litronic Machine for Industrial Applications 9
Attachment AF11
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type angled mono boom 21’4”, industrial-type flat angled stick 16’5” and clamshell model GM 20B/1.70 yd3 shells for loose material.
Undercarriage EWPad width in 24”Weight lb 68,000Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 16’5” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
14,8* 14,8* 12’ 8” 13,8* 13,8* 11,2* 11,2* 22’ 1” 15,9* 15,9* 13,5* 13,5* 10,0* 10,0* 27’ 7” 15,8* 15,8* 14,2* 14,2* 11,7* 11,7* 9,5* 9,5* 31’ 4” 16,5* 16,5* 14,5* 14,5* 13,0* 13,0* 9,3* 9,3* 33’10” 21,9* 21,9* 17,9* 17,9* 15,2* 15,2* 13,2* 13,2* 10,5* 10,5* 9,3* 9,3* 35’ 6” 38,1* 38,1* 25,4* 25,4* 19,4* 19,4* 15,9* 15,9* 13,5* 13,5* 10,8 11,4* 9,6* 9,6* 36’ 5” 13,9* 13,9* 28,1* 28,1* 20,7* 20,7* 16,4* 16,4* 13,4 13,5* 10,7 11,1* 10,0 10,1* 36’ 6” 10,6* 10,6* 28,5* 28,5* 20,9* 20,9* 16,4* 16,4* 13,1 13,2* 10,4* 10,4* 9,7* 9,7* 36’ 12,4* 12,4* 25,7* 25,7* 19,7* 19,7* 15,4* 15,4* 12,1* 12,1* 9,0* 9,0* 34’ 8” 21,7* 21,7* 17,0* 17,0* 13,3* 13,3* 9,9* 9,9* 9,7* 9,7* 30’ 4”
32'8"19'2"
US_H0445
9'10'6"
30
35
40
25
20
15
10
5
0
-5
-10
-15
-20
8
10
12
13
11
9
7
H0444
3540 30 25 20 15 10 5 0
111213 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6
-7mft m
ft
10 LH 30 C Litronic Machine for Industrial Applications
Attachment AF11
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type angled mono boom 21’4”, industrial-type flat angled stick 16’5” and clamshell model GM 10B/1.31 yd3 shells for loose material.
Undercarriage LCPad width in 24”Weight lb 63,950Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 16’5” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 LC 40 LC 35 LC 30 LC 25 LC 20 LC 15 LC 10 LC 5 LC 0 LC – 5 LC – 10 LC
15,4* 15,4* 11’ 8” 13,4* 13,4* 11,3* 11,3* 21’ 7” 15,9* 15,9* 12,4 13,2* 10,1* 10,1* 27’ 4” 15,8* 15,8* 12,5 14,2* 9,2 11,4* 8,6 9,5* 31’ 1” 16,5* 16,5* 12,3 14,5* 9,1 13,0* 7,5 9,3* 33’ 8” 21,7* 21,7* 16,7 17,7* 11,9 15,1* 8,9 13,2* 6,9 10,3* 6,8 9,3* 35’ 5” 37,4* 37,4* 24,2 25,2* 15,8 19,3* 11,4 15,9* 8,6 13,3 6,8 10,5 6,4 9,6* 36’ 4” 14,8* 14,8* 22,1 28,0* 14,7 20,6* 10,8 16,4* 8,3 12,9 6,6 10,3 6,2 9,7 36’ 7” 10,6* 10,6* 20,5 28,5* 13,9 20,9* 10,3 16,4 8,0 12,6 6,5 10,2 6,2 9,8 36’ 1” 12,3* 12,3* 19,7 25,8* 13,3 19,9* 10,0 15,5* 7,8 12,2* 6,5 9,0* 34’11” 19,5 22,1* 13,1 17,2* 9,8 13,4* 7,8 10,1* 7,5 9,5* 30’11”
33'2"19'8"
US_H0424
8'8"10'3"
30
40
35
25
20
15
10
5
0
-5
-10
-15
-20
8
10
12
13
11
9
7
H0423
3540 30 25 20 15 10 5 0
12 1113 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-7
-4
-6
mft m
ft
LH 30 C Litronic Machine for Industrial Applications 11
Attachment GA12
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with rigid cab elevation, industrial-type straight mono boom 22’4”, industrial-type angled stick 16’5” and grapple model GM 65/0.78 yd3 semi-closed tines.
Undercarriage EWPad width in 24”Weight lb 66,900Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 16’5” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
17,3* 17,3* 14,3* 14,3* 17’ 5” 17,2* 17,2* 11,5* 11,5* 11,4* 11,4* 25’ 17,4* 17,4* 15,2* 15,2* 10,2* 10,2* 30’ 17,5* 17,5* 15,1* 15,1* 13,3* 13,3* 9,6* 9,6* 33’ 5” 21,7* 21,7* 18,1* 18,1* 15,4* 15,4* 13,4* 13,4* 10,8 11,4* 9,3* 9,3* 35’10” 20,8* 20,8* 24,5* 24,5* 19,3* 19,3* 15,9* 15,9* 13,5* 13,5* 10,7 11,4* 9,3* 9,3* 37’ 5” 42,1* 42,1* 27,3* 27,3* 20,5* 20,5* 16,4* 16,4* 13,4 13,6* 10,6 11,2* 9,3 9,4* 38’ 2” 5,7* 5,7* 28,7* 28,7* 21,0* 21,0* 16,5* 16,5* 13,0 13,3* 10,4 10,7* 8,6* 8,6* 38’ 5” 6,2* 6,2* 21,7* 21,7* 20,3* 20,3* 15,8* 15,8* 12,6* 12,6* 9,7* 9,7* 7,5* 7,5* 37’11” 19,8* 19,8* 18,1* 18,1* 14,2* 14,2* 11,0* 11,0* 7,8* 7,8* 7,0* 7,0* 36’ 14,3* 14,3* 11,3* 11,3* 8,7* 8,7* 29’ 5”
33'8"21'2"
US_H0439
7'10"
30
45
40
35
25
20
15
10
5
0
-5
-10
-15
-20
8
10
12
14 H0438
13
11
9
7
3540 30 25 20 15 10 5 0
12 1113 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6
-7mft m
ft
12 LH 30 C Litronic Machine for Industrial Applications
Attachment GA12
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with rigid cab elevation, industrial-type straight mono boom 22’4”, industrial-type angled stick 16’5” and grapple model GM 65/0.78 yd3 semi-closed tines.
Undercarriage LCPad width in 24”Weight lb 63,500Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 16’5” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 LC 40 LC 35 LC 30 LC 25 LC 20 LC 15 LC 10 LC 5 LC 0 LC – 5 LC – 10 LC
16,9* 16,9* 14,7* 14,7* 16’ 8” 17,0* 17,0* 11,5* 11,5* 24’ 8” 17,4* 17,4* 12,2 15,2* 9,0 10,3* 29’ 8” 17,4 17,4* 12,2 15,1* 9,0 13,3* 7,5 9,6* 33’ 2” 21,6* 21,6* 17,0 18,1* 12,0 15,4* 8,9 13,4* 6,8 10,5 6,6 9,3* 35’ 8” 24,3* 24,3* 16,2 19,2* 11,5 15,9* 8,7 13,3 6,8 10,4 6,1 9,3* 37’ 4” 41,6* 41,6* 23,2 27,1* 15,2 20,4* 11,0 16,4* 8,4 12,9 6,6 10,2 5,8 9,0 38’ 2” 5,9* 5,9* 21,1 28,7* 14,2 21,0* 10,4 16,4 8,1 12,6 6,5 10,1 5,6 8,6* 38’ 5” 6,1* 6,1* 19,8 22,2* 13,4 20,4* 10,0 15,9 7,8 12,3 6,3 9,8* 5,7 7,6* 37’11” 9,0* 9,0* 19,2 19,7* 13,0 18,3* 9,7 14,3* 7,6 11,2* 6,3 8,0* 6,0 6,9* 36’ 2” 12,8 14,6* 9,6 11,6* 7,6 8,6* 7,5 8,5* 30’ 2”
34'1"21'8"
US_H0443
7'10"
30
35
40
45
25
20
15
10
5
0
-5
-10
-15
-20
8
10
12
13
14
11
9
7
H0442
3540 30 25 20 15 10 5 0
111213 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6
-7mft m
ft
LH 30 C Litronic Machine for Industrial Applications 13
Attachment GK12
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with hydr. cab elevation, industrial-type straight mono boom 22’4”, industrial-type stick with tipping kinematics 16’5” and sorting grab SG 30/1.11 yd3 tines.
Undercarriage EWPad width in 24”Weight lb 69,100Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 16’5” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
18,9* 18,9* 14,5* 14,5* 18’ 6” 17,3* 17,3* 13,0* 13,0* 11,3* 11,3* 25’10” 16,7* 16,7* 14,5* 14,5* 11,4* 11,4* 9,9* 9,9* 30’ 7” 16,8* 16,8* 14,5* 14,5* 12,6* 12,6* 9,2* 9,2* 33’11” 19,5* 19,5* 17,5* 17,5* 14,7* 14,7* 12,7* 12,7* 10,3 10,8* 8,8* 8,8* 36’ 4” 15,2* 15,2* 23,2* 23,2* 18,6* 18,6* 15,2* 15,2* 12,8* 12,8* 10,2 10,7* 8,6* 8,6* 37’11” 41,3* 41,3* 26,6* 26,6* 19,7* 19,7* 15,7* 15,7* 12,8* 12,8* 10,0 10,5* 8,3* 8,3* 38’ 8” 27,9* 27,9* 20,2* 20,2* 15,7* 15,7* 12,5 12,6* 9,9 10,0* 7,3* 7,3* 38’11” 3,4* 3,4* 17,8* 17,8* 19,5* 19,5* 15,1* 15,1* 11,8* 11,8* 9,0* 9,0* 6,2* 6,2* 38’ 5” 17,1* 17,1* 17,3* 17,3* 13,4* 13,4* 10,3* 10,3* 7,1* 7,1* 6,2* 6,2* 36’ 13,5* 13,5* 10,5* 10,5* 7,9* 7,9* 29’ 6”
33'8"19'
US_H0449
9'8"
10'6"
30
35
40
45
50
25
20
15
10
5
0
-5
-10
-15
8
10
12
13
14
15
16
11
9
7
H0448
354045 30 25 20 15 10 5 0
1112131415 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-4
-6mft m
ft
14 LH 30 C Litronic Machine for Industrial Applications
Attachment GA13
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with rigid cab elevation, industrial-type straight mono boom 23’11”, industrial-type angled stick 18’1” and grapple model GM 65/0.78 yd3 semi-closed tines.
Undercarriage EWPad width in 24”Weight lb 67,350Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 18’1” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
15,7* 15,7* 13’ 8” 15,2* 15,2* 11,2* 11,2* 23’10” 16,8* 16,8* 14,6* 14,6* 9,7* 9,7* 29’10” 16,5* 16,5* 14,3* 14,3* 12,7* 12,7* 8,9* 8,9* 34’ 16,7* 16,7* 14,4* 14,4* 12,7* 12,7* 10,9 11,2* 8,5* 8,5* 37’ 1” 17,5* 17,5* 14,8* 14,8* 12,8* 12,8* 10,9 11,2* 8,3* 8,3* 39’ 4” 23,9* 23,9* 18,7* 18,7* 15,4* 15,4* 13,0* 13,0* 10,7 11,1* 8,6 9,3* 8,3* 8,3* 40’ 8” 41,2* 41,2* 26,6* 26,6* 19,9* 19,9* 15,9* 15,9* 13,2* 13,2* 10,4 11,1* 8,5 9,0* 8,0 8,2* 41’ 6” 4,0* 4,0* 27,9* 27,9* 20,4* 20,4* 16,0* 16,0* 12,8 13,1* 10,2 10,7* 8,4 8,5* 7,5* 7,5* 41’ 7” 4,6* 4,6* 16,3* 16,3* 19,9* 19,9* 15,5* 15,5* 12,4 12,5* 10,0 10,0* 7,4* 7,4* 6,6* 6,6* 41’ 1” 7,2* 7,2* 15,3* 15,3* 17,9* 17,9* 14,2* 14,2* 11,3* 11,3* 8,8* 8,8* 5,8* 5,8* 39’ 8” 16,9* 16,9* 14,6* 14,6* 11,8* 11,8* 9,3* 9,3* 6,8* 6,8* 34’ 8”
35'3"21'6"
US_H0437
8'8"
30
45
40
35
25
20
15
10
5
0
-5
-10
-15
-20
8
10
12
14
15
13
11
9
7
H0436
354045 30 25 20 15 10 5 0
12 1114 13 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-7
-4
-6
mft m
ft
LH 30 C Litronic Machine for Industrial Applications 15
Attachment GA14
Dimensions
Operating Weight and Ground PressureThe operating weight includes basic machine with rigid cab elevation, industrial-type straight mono boom 25’7”, industrial-type angled stick 19’8” and grapple model GM 65/0.78 yd3 semi-closed tines.
Undercarriage EWPad width in 24”Weight lb 67,800Ground pressure on request
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24” wide triple grouser pads. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.
Industrial Stick 19’8” 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft Under- ft carriage ft in 45 EW 40 EW 35 EW 30 EW 25 EW 20 EW 15 EW 10 EW 5 EW 0 EW – 5 EW – 10 EW
13,3* 13,3* 11,4* 11,4* 21’10” 15,7* 15,7* 13,3* 13,3* 9,4* 9,4* 29’ 1” 15,9* 15,9* 13,8* 13,8* 12,2* 12,2* 8,5* 8,5* 34’ 2” 13,7* 13,7* 12,1* 12,1* 10,7* 10,7* 7,9* 7,9* 37’11” 16,2* 16,2* 13,9* 13,9* 12,1* 12,1* 10,7* 10,7* 8,7 8,9* 7,6* 7,6* 40’ 8” 17,0* 17,0* 14,3* 14,3* 12,3* 12,3* 10,8* 10,8* 8,7 9,3* 7,5* 7,5* 42’ 8” 21,0* 21,0* 18,2* 18,2* 14,9* 14,9* 12,6* 12,6* 10,6 10,8* 8,5 9,2* 7,3 7,5* 44’ 40,4* 40,4* 26,0* 26,0* 19,3* 19,3* 15,4* 15,4* 12,8* 12,8* 10,3 10,8* 8,4 9,1* 7,0 7,2* 44’ 8” 2,8* 2,8* 25,4* 25,4* 19,9* 19,9* 15,6* 15,6* 12,6 12,7* 10,0 10,6* 8,2 8,7* 6,5* 6,5* 44’10” 3,4* 3,4* 12,6* 12,6* 19,4* 19,4* 15,2* 15,2* 12,1 12,3* 9,7 10,0* 8,0 8,0* 5,8* 5,8* 44’ 5” 5,6* 5,6* 12,0* 12,0* 17,6* 17,6* 14,0* 14,0* 11,3* 11,3* 9,1* 9,1* 6,9* 6,9* 4,9* 4,9* 43’ 5” 13,5* 13,5* 14,7* 14,7* 12,0* 12,0* 9,7* 9,7* 7,5* 7,5* 5,5* 5,5* 39’ 2”
36'11"21'10"
US_H0422
10'2"
30
50
45
40
35
25
20
15
10
5
0
-5
-10
-15
-20
-25
8
10
12
14
16
15
13
11
9
7
H0421
354045 30 25 20 15 10 5 0
12 1114 1315 10 9 7 5 3 18 6 4 2 0
6
4
2
0
1
3
5
-2
-1
-3
-5
-7
-4
-6
-8mft m
ft
Shells for Loose Material
with with with with ribbed perforated ribbed perforated shells shells shells shells
16 LH 30 C Litronic Machine for Industrial Applications
Variety of Tools
Shells for loose material with cutting edge (without teeth)Clamshell Model GM 20BCutting width of shells ft in 3’3” 3’11” 5’3”Capacity yd3 1.70 1.96 2.62For loose material, specific weight up to lb/yd3 2,528 2,528 2,528Weight lb 2,987 3,120 3,417
Multiple Tine Grapples open tines semi-closed tines closed tines
Grapple Model GM 65 (5 tines)Capacity yd3 0.52 0.78 0.52 0.78 0.52 0.78 Weight lb 2,535 2,712 2,833 3,120 2,921 3,351
Crane Hook with SuspensionMax. load lb 27,558Height with suspension ft in 3’1”Weight lb 212
Magnet Devices/Lifting MagnetsGenerator kW 13/17 13/17Electromagnets with SuspensionPower kW 8.8 8.5/10Diameter of magnet ft in 4’1” 4’5”Weight lb 2,888 3,748
Wood GrappleGrapple Model GB 20BClaw width ft in 2’8” 2’8” 2’8”Size in2 2,015 2,325 2,635Height of grapple, closed ft in 9’8” 9’10” 10’Weight lb 3,693 3,805 3,913
Sorting GrappleGrapple Model SG 30Cutting width of shells ft in 3’3” 3’3” 3’9” 3’9”Capacity yd3 0.98 1.11 1.18 1.31Max. closing force lb 17,640 17,640 17,640 17,640Weight incl. adapter plate lb 3,595 3,550 3,770 3,725
LH 30 C Litronic Machine for Industrial Applications 17
Equipment
• = Standard, + = Option* = optionally extendable after one year
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.
UndercarriageTrack pads, variants +Dozer blade +Undercarriage, variants +Tool equipment, extended +
Electric cooler +LiDAT Plus (extended Liebherr data transfer system) * •Bullet proof glass +Positioning swing brake +Proportional control +Radio Comfort (control via display) +Preparation for radio installation •Back-up alarm (acoustic signal is emitted traveling backward, can not be switched off) +Warning beacon on cab +Windscreen wiper, roof +Top guard +Front guard +Sun visor +Auxiliary heating, adjustable (week time switch) +Flashing light (xenon) +Electronic immobilizer +
Operator’s CabCab lights rear, halogen +Cab lights rear, LED 1300 lumen +Cab lights front, halogen •Cab lights front, LED 1300 lumen +Operator’s seat Standard •Operator’s seat Comfort +Operator’s seat Premium +Driving alarm (acoustic signal is emitted during travel, can be switched ON/OFF) +Fire extinguisher +Cab elevation, hydraulic (LHC) +Cab elevation, rigid (LFC) +Automatic air conditioning •
AttachmentBoom lights, 2 pieces, halogen •Boom lights, 2 pieces, LED 1300 lumen +Stick lights, 2 pieces, halogen •Stick lights, 2 pieces, LED 1300 lumen, with protection +Boom shutoff, ascending +AutoLift +Height limitation and stick shutoff, electronically +Boom cylinder cushioning +Industrial stick with quick coupling +Stick camera (with separate monitor), bottom side, with protection +Liebherr multi coupling system +Liebherr quick coupler, hydraulic or mechanical +Pipe fracture safety valves hoist cylinders •Pipe fracture safety valve stick cylinder •Quick coupling system LIKUFIX +Quick coupling system MH40/MH110 +Protection for piston rod, hoist cylinder +Overload warning device +Protection for stick +
UppercarriageRefuelling system with filling pump +Railing on uppercarriage +Generator +Main battery switch for electrical system •Protection for headlights +Protection for rear lights +
HydraulicsElectronic pump regulation •Liebherr hydraulic oil from – 4 °F to + 104 °F +Liebherr hydraulic oil, biologically degradable +Magnetic rod in hydraulic tank •Bypass filter +Preheating hydraulic oil +
EngineFuel anti-theft device +Liebherr particle filter •Reversible fan drive, fully automatic +Air pre-filter with dust discharge +Protective grid in front of cooler intake •Preheating fuel +Preheating coolant +Preheating engine oil +
Complete MachineLubrication
Central lubrication system for uppercarriage and attachment, automatically •
Special coatingSingle-coloured, grey parts excepted +Single-coloured, grey parts included (except undercarriage) +Multicoloured (except undercarriage) +
MonitoringRear view monitoring with camera •Side view monitoring with camera +
The Liebherr Group of Companies
Wide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high-value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes.
Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excel lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.
State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control techno logy for construction equipment and mining trucks.
Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 130 companies with over 38,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.
www.liebherr.us
RG
-BK
-RP
LH
B/V
F 11
6523
61-0
-10.
13_e
nUS
A
ll ill
ustr
atio
ns a
nd d
ata
may
diff
er fr
om s
tand
ard
eq
uip
men
t. S
ubje
ct t
o ch
ange
with
out
notic
e.
Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: [email protected] www.facebook.com/LiebherrConstruction