Name

I.D. No. Date:

0 1 2 3 4 5

General

1 Selection & use of appropriate PPE 0 10

Planer

2 Isolate machine prior to setting fences 0 10

3 Accurate setting of fence to 90° to the infeed table 0

4 Correct setting of bridge guard and blade exposure 0 10

5 Correct orientation of material 0

6 Correct setting of bridge guard lead in for planing face side & edge 0

7 Correct and safe procedure when surfacing material (Hand positions) 0 10

Thickeness Planer

8 Correct and safe procedure when thicknessing material (Feed & Depth) 0

Rip Saw

Sedgwick Saw Jet Saw

9 Correct and safe setting of safety guards 0

10 Correct setting of rip fence for ripping material 0

11 Safe procedure for ripping (Hand positions & use of push sticks) 0

12 Correct setting of rip fence for cross-cutting 0 10

13 Correct and safe procedure for cross-cutting 0

14 Safe removal of waste during machining 0

15 Return Machine to safe settings 0

Overall

1,2,4,7& 12 are critical fail points.

If you score '0' in any element you will automatically fail the test

Comments:

Pass Fail

Score

Planer / Thicknesser / Rip saw

Note

Minimum score to pass is 85