main sound system manual
DESCRIPTION
Main Sound System ManualTRANSCRIPT
![Page 1: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/1.jpg)
Sound System (Speakers, Controller, Microphones)
Speaker Stands:
Open the speaker stands, using the bottom knob displayed in the image below, to a
suitable width (ask DJ for confirmation that your width is good).
![Page 2: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/2.jpg)
Once your speaker stands are placed correctly, pull the aluminum piece to the top by
pressing in on the side buttons and pulling up.
![Page 3: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/3.jpg)
Place your speaker scrim onto the speaker stand. Then place your speaker onto the
aluminum pole and then loosen the top knob to lift the speaker to the desired height.
Once the height is set correctly tighten the knob.
![Page 4: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/4.jpg)
Speakers:
With your speaker on the scrimmed speaker stand plug the XLR and power cables into
the back of the speaker as shown below.
![Page 5: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/5.jpg)
Controller (SX):
Open the SX and pull the power cable (see image below) and plug it in.
![Page 6: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/6.jpg)
Take the USB and put it through the hole on the left side (facing the SX as in the first
image above).
Lastly, plug the other end of the XLR from the speaker into the back of the SX as shown
below.
![Page 7: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/7.jpg)
Microphones:
Pull the base out of the case and plug the XLR into the back as well as the power adapter.
Be sure to loop the power adapter as seen below to prevent accidental unplugging.
For the main microphone plug the other end of the XLR into the “Mic 1” XLR input of
the back of the SX.
![Page 8: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/8.jpg)
For the toast or backup microphone plug the ¼” adapter into the “Mic 2” input of the SX.
![Page 9: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/9.jpg)
Main Microphone
![Page 10: Main Sound System Manual](https://reader038.vdocument.in/reader038/viewer/2022102819/55cf9299550346f57b97d6c2/html5/thumbnails/10.jpg)
Toast/Backup Microphone