malek tabbal - aub.edu.lb · ahmad mansour physics: study of the superconducting properties of the...
TRANSCRIPT
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
1/25
Malek Tabbal Professor of Physics, Associate Dean
Director of USAID University Scholarship Programs
Faculty of Arts & Sciences, American University of Beirut, Riad El Solh 1107 2020,
Beirut, Lebanon.
Tel: 01-350000-4280/4, Fax: 01-744461, E-mail: [email protected]
===============================================================
A. EDUCATION, SCHOLARSHIP & EXPERIENCE
EDUCATION
Ph.D Applied Physics, École Polytechnique de Montréal, Canada, 1994.
M.S. Physics, American University of Beirut, Beirut, Lebanon, 1988.
B.S. Physics, American University of Beirut, Beirut, Lebanon 1986.
RESEARCH EXPERTISE
- Laser interaction with matter: Pulsed Laser Deposition (PLD) of thin films and Pulsed Laser
Melting (PLM) of materials.
- Electron Paramagnetic Resonance (EPR) and magnetic properties of materials.
- Plasma processing and diagnostics for applications in thin film growth.
- Materials for Energy Applications.
ACADEMIC APPOINTMENTS
2011-pres. Director of the AUB USAID-University Scholarship Programs II, IV V
and VI. Office of the Provost, AUB, Beirut, Lebanon.
2009-pres. Associate Dean of the Faculty of Arts & Sciences and Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon
2008-09 Chairman & Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon
2007-08 Chairman & Associate Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon
2006-07 Associate Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
2/25
2005-06 Visiting Scholar (On research leave from AUB). Materials Science
Group, School of Engineering & Applied Sciences, Harvard University,
Cambridge (MA) USA.
2004-05 Associate Professor & Chairman.
Department of Physics, American University of Beirut, Beirut, Lebanon.
2003-04 Associate Professor & Acting Chairman.
Department of Physics, American University of Beirut, Beirut, Lebanon.
2002-03 Associate Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon.
1997-2002 Assistant Professor.
Department of Physics, American University of Beirut, Beirut, Lebanon.
Invited Professor.
Institut National de la Recherche Scientifique (INRS)-Énergie et
Matériaux, Varennes, Québec, Canada.
1995-97 Post-Doctoral Fellow.
(INRS)-Énergie et Matériaux, Varennes, Québec, Canada.
1992-93 Teaching Assistant: Département de Génie Physique, École
Polytechnique, Montréal.
1991-94 Ph.D student and Research Fellow, Département de Génie Physique,
École Polytechnique, Montréal, Canada.
1989 Instructor: Department of Physics, A.U.B., Beirut, Lebanon.
1988-89 MS Student and Research Assistant, Department of Physics, A.U.B.,
Beirut, Lebanon.
1986-87 Teaching Assistant, Department of Physics, A.U.B., Beirut, Lebanon
AWARDS & SCHOLARSHIPS
2015 Research Fellowship for Invited Professor at the LNIO (Laboratoire de
Nanotechnologie et d’Instrumentation Optique) Université de Technologie
de Troyes, France.
2014-15 Abdul Hamid Hallab Regional External Program (REP) Service
Excellence Award, AUB.
2005-06 Arab Fund Distinguished Scholar Award.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
3/25
2005-06 Fulbright Scholar Award: spend one full academic year at Harvard
University, Cambridge, MA, working in the field of laser processing of
materials.
2003-04 Teaching Excellence Award: American University of Beirut: one of the
two teaching excellence awards given per year at AUB.
1997-2002 Invited Professor at the INRS-Énergie et Matériaux, Varennes, Québec,
Canada.
1997-98 Long Term Faculty Development Grant award from the University
Research Board of AUB to spend two months at the Institut National de la
Recherche Scientifique (INRS)-Énergie et Matériaux, in Canada.
1995-97 Post-doctoral Fellowship at the Institut National de la Recherche
Scientifique (INRS)-Énergie et Matériaux, Varennes, Québec, Canada:
one of two fellowships given per year on a competitive basis.
1989-94 Bourse d’Excellence de la Francophonie (full scholarship) from the
Canadian Government for Ph.D. study at the École Polytechnique de
Montréal, in Canada
1989 Deutscher Akademischer Austausch Dienst (German Academic
Exchange Service) Scholarship for Ph.D. study in Germany: declined.
1987-88 Elmer and Mamdouha Bobst research assistantship for graduate study
at AUB, Beirut, Lebanon.
1984-86 Hariri Foundation scholarship for undergraduate study in Physics AUB,
Lebanon.
PATENT PROPOSAL SUBMITTED TO HARVARD
2006 “Point Defect Engineered Si Light-Emitting Diode at 1.218 μm” by J. Bao, Malek
Tabbal et al. US Provisional Patent filed on Nov. 13, 2006 (GC 8431, HU2844).
PUBLICATIONS
More than 60 articles in international journals; more than 70 contributions to
scientific conferences. See attached lists at the end of the CV.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
4/25
INVITED RESEARCH LECTURES AND WORKSHOPS
Mar. 2014 “Making Silicon an Infra-red material”, Part of the Materials Science
Seminar Series, AUB.
April 2013 “A Story about Silicon, Lasers and Solar Cells”, Part of the Physics
Research Seminar Series organized by the Physics Students Society
(AUB).
May 2011 “Harvesting energy through thermoelectrics: Optimizing materials for
power generation and cooling”, Part of the Kamal A. Shair CRSL
Research Conference, AUB.
May 2010 “Applications of RBS in the characterization of laser processed thin
films”, part of the Lebanese Atomic Energy Commission Workshop on
Principles and Applications of Nuclear Techniques, LCNRS, Beirut.
May 2007 “Excimer laser processing of advanced materials”, Part of the Physics
Research Seminar Series organized by the Physics Students Society
(AUB).
June 2006 “Thin film and surface processing using excimer lasers” (Host: Dr. F.
Vollmer) Rowland Institute at Harvard, Cambridge, MA.
Mar. 2006 “Control of the structural and bonding properties of thin films grown by
remote plasma assisted pulsed laser deposition” (Host: Prof. C. B. Arnold)
Princeton University, Princeton, NJ.
Oct. 2005 “Growth and characterization of pulsed laser deposited chromium oxide
thin films” (Hosts: Profs. M. J. Aziz & F. Spaepen)
Harvard University, Cambridge, MA.
May 2004 “Graphitic nano-clustering in amorphous carbon based thin films”, Part of
the Materials Science Forum ‘04.
Sept. 2002 “Synthesis of nitride thin films by Laser Ablation Assisted by a Nitrogen
Surface Wave Plasma”, (Host: Prof. M. D. Calzada)
University of Cordoba, Cordoba, Spain.
Sept. 2002 “Pulsed Laser Deposition: from amorphous films to epitaxy” (Host: Dr. E. Fogarassy)
CNRS-PHASE, Strasbourg, France
Apr. 1999 “Remote plasma processing of materials”, Part of the Materials Science
Forum ‘99.
REVIEWER FOR INTERNATIONAL RESEARCH JOURNALS AND GRANTS
AGENCIES
- Professional research journals: Applied Physics A: Materials Science &
Processing, Thin Solid Films, Diamond and Related Materials, Applied Surface
Science, Surface and Coatings Technology, Materials Science in Semiconductor
Processing.
- Grant and funding proposals: Qatar National Research Fund (QNRF), Arab
Science & Technology Foundation (ASTF), Lebanese National Council for
Scientific Research (LNCSR); University Research Board of AUB; Natural
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
5/25
Sciences and Engineering Research Council of Canada (NSERC); CEDRE
Lebanese Ministry of Education and Higher Education & French Ministry of
Foreign Affairs; Iraqi Research Development Initiative (IRDI); Conseil Franco-
Quebecois de Cooperation Universitaire (CFQCU).
OTHER RESEARCH RELATED ACTIVITIES
- Member of the organizing committee of the first AUB Symposium on Materials
Science and Energy, Beirut, April 2014.
- Member and Treasurer of the CEDRE French-Lebanese Research
Collaboration Program Ministry of Education and Higher Education & French
Ministry of Foreign Affairs (2013-2016).
- Member of the organizing committee of the first Mediterranean Conference on
Innovative Materials and Applications, CIMA 2011, Beirut, March 2011.
- Chair of “Time-resolved Imaging and Ablation Fundamentals” (Lasers &
Applications in Science & Technology LASE 07 conferences) SPIE Photonics
West 2007, San Jose CA, Jan. 2007.
- Program committee member of LAMOM XIII within the LASE 08
conferences, part of the SPIE Photonics West 2008 meeting , San Jose, CA, Jan.
2008.
- Member of the Selection Panel for the Fulbright Awards from Lebanon,
December 2007.
B. TEACHING
UNDERGRADUATE COURSES
Physics 101 (4 credits) Freshman level calculus based Classical Mechanics 1998 and 2007
Physics 226 (3 credits) Senior level Solid State Physics 1997-98, 05…
Physics 103 (3 credits) Freshman level non-calculus Classical Mechanics 2008-…
Physics 204 (3 credits) Classical Physics for Life Sciences 1998-2007-09
Physics 205 (3 credits) Modern Physics for Life Sciences 1998-2004
Physics 231B (3 credits) Senior level Introduction to Plasma Physics 2001
Physics 220 (3 credits) Junior level Electromagnetic theory (with Dr. Christidis) 2002
Physics 101 L (1 credit) Freshman level Classical Mechanics Laboratory 2007
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
6/25
Physics 257L (3 credits) Senior level Advanced Physics Laboratory (with Dr. Christidis) 2002
Physics 204L (1 credit) Classical Physics for Life Sciences Laboratory (Supervisor) 1997-present
Physics 205L (1 credit) Modern Physics for Life Sciences Laboratory (Supervisor) 1998-present
Physics 210L (1 credit) Sophomore level introductory Physics Lab. (Supervisor) 2007
Physics 211L (1 credit) Sophomore level Electricity and Magnetism Lab. (Supervisor) 2007-08
Physics 226 (3 credits) Solid State Physics (Writing Intensive Course as of 2010-11) 1999-present
GRADUATE COURSES
Physics 309B (3 credits) Surface Physics and Thin Film Physics 2002, 03 & 07
Physics 310B (3 credits) Electron Paramagnetic Resonance, with Profs. Isber & Christidis 2001
Physics 392 J (3 credits) Fundamentals of the heteroepitaxial growth, with Prof. Kazan 2011
SUPERVISION OF GRADUATE MS THESES AT AUB
Reham Abu Amer Crystalline and optical properties of ZnO nanoparticles
synthesized by a solvent based technique
2015
Tamara Ayyash Reflectivity-based technique for the determination of the
dielectric properties of materials: application to silicon carbide
2014
Mona Bahja Characterization of tyre pottery production using pixe and xrf
techniques and cluster analysis
2013
Nancy Rahbany Optical characterization of AlGaN thin films (co-adviser) 2012
Wassim Kassem Pulsed Laser Deposition of W thin films on graphite for fusion
applications.
2011
Abeer Al Mohtar Investigation of the oxidation of tungsten using a microwave
remote plasma
2011
Mirvat Shams Eddine Optical Analysis of Boron Nitride Thin Films (Co-adviser) 2011
George Al Makdessi Development and characterization of a low pressure plasma
system for the surface modification of materials
2010
Maya Abi Akl
Phase control of MnO2 thin films by plasma assisted laser
Ablation. Debs award for academic excellence.
2009
Noura Abdallah Probe measurements in low pressure expanding microwave
Excited plasmas
2009
Diala Haidar
Optical Emission Spectroscopy of Oxygen Microwave Plasma
For oxide thin film growth applications
2008
Elias Hannoun
Electron paramagnetic resonance investigation of
the nanostructure of unhydrogenated silicon carbide thin films
2006
Charbel Madi Remote plasma assisted pulsed laser deposition
of chromium oxide thin films
2006
Aurore Said Amorphous to crystalline phase transition in pulsed
laser deposited silicon carbide
2004
Samer Kahwaji Growth of chromium oxides by laser ablation of Cr2O3. 2004
MEMBERSHIP IN THESES COMMITTEES AT AUB
Remi Fayad Hematite and titania inverse opals and inverse
photonic glass nanostructured films for solar energy
conversion and water splitting
2014
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
7/25
Ali Abi Khalil Interpolation between Linearized and Atomistic Models
for Accurate Calculation of the Lattice Thermal Conductivity in the Full
Temperature Range
2012
Micheal Kattoura PhD Mechanical Engineering: Multiscale dislocation dynamics modeling of
the high strain rate deformation in copper single crystal under monotonic,
cyclic, & shock loading
2013
Lamiss Zaydouny Physics: Fluid motion in a cylindrical container subject to
electromagnetic forces
2010
Farah Hariri Computational Sciences: Simulating bi-dimensional turbulent
plasmas using the Hasegawa-Mima model
2010
Rima Hajjar Physics: Massive gas jets interaction with magnetically confined
plasmas
2010
Khaled Mourad Physics: A simple theoretical description of the production of
atomic O in a cold plasma under steady state conditions
2010
Ghina Mahmood Physics: Production of 13
C in asymptotic giant branch stars 2009
Mayssa El Harakeh Chemistry: Photoelectrochemical studies of CdS Quantum Dot Assemblies
in Polyelectrolyte and on Photonic Crystals for Energy Conversion
2009
Ahmad Mansour Physics: Study of the superconducting properties of the
new high temperature superconductors TlBa2Ca2Cu3-xCoxO8.5
2005
Maryze Markarian Chemistry: Self-assembly and catalytic activity of metal and
semiconductor nanoparticles in polyelectrolytes.
2005
Faten Masri Education: The relationship between students’ views about
knowing and learning physics and their understanding of physics.
2004
MEMBERSHIP IN RESEARCH THESES COMMITTEES OUTSIDE AUB Rana Nicolas
Univ Tech Troyes, France
PhD: Squeezing light in nanoparticle plasmonic
metasurface: from nanometric to atomically thin spacer
2015
Abeer Al Mohtar
Univ Tech Troyes, France
PhD: Localized Surface Plasmon and Phonon Polaritons by
Mid-IR Spectroscopy and Near-Field Nanoscopy
2015
Juliana Jaramillo
Ecole Centrale, France
PhD: Tuning the thermal conductivity of polycrystalline films
via multiscale structural defects and strain
2015
Zeinab Koeik Beirut Arab Univ
MS: Transport Theoretical Studies in Semiconductor
nanowires
2015
Slyman Karishi
Lebanese Univ.
PhD: Theoretical Investigation of Terahertz Collective
Oscillations in Electron Devices
2014
Raafat Mawassi
Beirut Arab Univ
PhD: Effect of nano-scale oxides addition on the physical
properties of high temperature superconductors
2013
Cynthia El Eid
Lebanese University
PhD: Synthesis and characterisation of novel iron oxide
and carbide nanostructures (in french).
2010
Huda Hammour
Beirut Arab Univ
MS: Theoretical Calculations with
Spin-Orbit Coupling of the Molecule LaS
2010
Bassel Abdel Samad
J. Monnet Univ. France
PhD: Growth and properties of YIG thin films for
Microwave applications (in French). Rapporteur
2009
Sandra Rizk
Univ. Nancy, France
PhD: Synthesis and characterization of carbon based
Nanostructures par plasma CVD; Committee president
2009
Houssam Jawhari
Beirut Arab Univ
MS: Single & double minimum potential for a collision
by light nucleus of a heavy alkaline.
2009
SUPERVISION OF STUDENT RESEARCH TRAINING PROJECTS W. Kassem (AUB)
undergraduate
Pulsed Laser Deposition on W thin films AY 2008-09
M. Yang (Mt Hoyloke) Langmuir probe measurements in Ar expanding plasmas Summer 2008
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
8/25
undergraduate
O. Malaeb (AUB)
undergraduate
Calibration of the temperature of a substrate heater using an
optical pyrometer.
AY 2006-07
K. Temsah (AUB)
undergraduate
Grain size determination of pulsed laser deposited thin films
using Atomic Force Microscopy.
Summer 2007
D. Woolf (Harvard)
Ph.D. student
Redesigning a UV-VIS-IR Photospectrometer for Reflection
and Transmission Measurements on Millimeter-sized Samples.
Spring 2006
M. Tsuchya (Harvard)
Ph.D. student
Photoresponsivity Measurement of Pulsed Laser Melted
Silicon Supersaturated with Sulfur.
Spring 2006
N. Ghandoor
(U. of Toulon, France).
Stress determination in chromium oxides thin films by X-ray
diffraction.
Summer 2005
Rafif Hamam (AUB)
undergraduate
Set-up of an ICCD camera for applications in imaging and
optical spectroscopy.
Spring 2005
Sandra Rizk (USJ)
undergraduate
Resistivity measurements of carbon nitride thin films
using the Van der Pauw technique.
AY 2003-04
G. Haidar (AUB)
undergraduate
Measurements of electron density in nitrogen low pressure
plasma using a resonant cavity.
Summer 2002
M. Kazopoulo (AUB)
undergraduate
Development of a low pressure radio-frequency surface wave
plasma
AY 1999-2000
FACILITATOR/PRESENTER IN TEACHING WORKSHOPS TO AUB
FACULTY
October 2014 Interactive lecturing in large classes, Part of the “Faculty Seminar on
Learning and Teaching Excellence”.
April 2011 Session II: Interactive lecturing in large classes Part of the “Faculty
Seminar on Learning and Teaching Excellence”.
May 2009 Session IV: Interactive lecturing in large classes Part of the “Faculty
Seminar on Learning and Teaching Excellence”.
March 2008 Session III: Strategies for teaching large classes, Part of the “Faculty
Seminar on Learning and Teaching Excellence”.
March 2007 Session IV: The lecture and handling large classes, Part of the “Faculty
Seminar on Learning and Teaching Excellence”.
Feb. 2007 Seminar on Developing a Teaching Portfolio, with Profs. Nesreen
Ghaddar (Mechanical Engineering) and Saouma BouJaoude (Education).
March 2005 Session IV: Teacher Oriented Methods I (Lecture, Handling Large
Lecture Classes), Part of the “Faculty Seminar on Learning and Teaching
Excellence”, with Prof. Ahmad Smaili (Mechanical Engineering).
February 2005 Seminar on Developing a Teaching Portfolio, with Profs. Nuhad Dumit
(Nursing), Saouma BouJaoude (Education).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
9/25
March 2004 Session II: Teacher Oriented Methods I (Lecture, Handling Large
Lecture Classes) Part of the “Faculty Seminar on Learning and Teaching
Excellence”, with Dr. Amal Bouzeineddine (Education).
March 2003 Session V: Teacher Oriented Methods I (Lecture, Handling Large
Lecture Classes) Part of the “Faculty Seminar on Learning and Teaching
Excellence”, with Dr. Amal Bouzeineddine (Education).
INVITED PRESENTER IN TEACHING/ACADEMIC WORKSHOPS TO NON-
AUB FACULTY
May 2010 Scientific publications as an indicator of research activities in the
Faculty of Arts and Sciences at AUB, Workshop on Scientific
Publications at USEK, Lebanon.
Nov. 2007 Interactive Lecturing, a 2-day workshop attended by selected Faculty
members from Qatar University.
Sept. 2003 Integrating Science and Math through Computer-Based Laboratories,
Part of two-day workshop attended by teachers from Lebanese high
schools, with Profs. Murad Jurdak and Saouma BouJaoude (Education).
TEACHING WORKSHOPS ATTENDED AT AUB
Sept. 2007 “Program & Course Learning outcomes”, 2-day workshop presented by
a group of AUB professors.
April 2004 “Problem Based Learning”, presented by Prof. George Watson,
University of Delaware.
Nov. 2002 “How to make a teaching portfolio”, presented by Profs. Nesreen
Ghaddar (Mechanical Engineering) and Nuhad Dumit (Nursing).
Spring 2002 Semester long workshop “Faculty Seminar on Learning and Teaching
Excellence” organized by the Center of Teaching & Learning at AUB.
June 2000 Workshop on Teaching Effectiveness, presented by Prof. Yezdi Bhada,
Georgia State University.
May 2000 Cooperative Learning Workshop by Drs. David & Roger Johnson, Univ.
of Minnesota.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
10/25
CONTRIBUTIONS TO EDUCATION RELATED MEETINGS
4- M. Khoury and M. Tabbal, “Reflecting on the three-year cycle of PLO assessment
at AUB”, Center of Teaching and Learning Annual Conference, AUB, Beirut,
February 2014.
3- M. Tabbal, “Interactive lecturing in introductory science classes”, Innovative Ideas
session, 10th
Annual Science and Math Teachers Conference, AUB, Beirut,
November 2007.
2- M. Tabbal, “Enhancing student understanding of physical concepts by computer
assisted experimentation” Practical Interactive session, 7th
Annual Science and Math
Teachers Conference, AUB, Beirut, May 2003.
1- M. Tabbal, “Computer assisted experimentation in teaching laboratory Physics”,
Practical Interactive session, 6th
Annual Science and Math Teachers Conference,
AUB, Beirut, May 2002.
C. SERVICES TO UNIVERSITY AND PROFESSION
ADVISING OF STUDENTS
1998-04;0709 Freshman students advisor, with 40 to 50 students per year; contributed to
the major the restructuring of the AUB Freshman program to make it more
flexible and to the implementation of the Freshman Residential
Orientation Program (FROP).
2007-… Physics students’ advisor.
MEMBERSHIP IN PROFESSIONAL ASSOCIATIONS
American Vacuum Society (AVS) affiliated to the American Institute of Physics
(AIP).
SPIE: The International Society for Optical Engineering.
Institute of Physics (IOP).
MEMBERSHIP IN AUB COMMITTEES
Within the Department of Physics
Member of the Program Review Committee (2010-…)
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
11/25
Departmental Committee on developing Course Learning Outcomes (2008-10)
Departmental Committee on developing Program Learning Outcomes (2007-08)
Member of Ph.D. program committee (2002-05).
Member of the departmental committee to enhance graduate student enrollment in
Physics (2002-03).
Within the Faculty of Arts & Sciences
Chair of the Students’ Academic Affairs Committee (2009-…).
Chair of the search committee for the UPP director (2010-…).
Acting Chair of the Curriculum Committee (2006-2009).
Member of the Research Committee (2008-present).
Member of the Student Affairs Committee (2002-04).
Member of the Administrative Committee (2002-04).
Member of the Environmental Ad-hoc Committee (1999-2001).
Member of the Administrative Committee (1999-2001).
Member of the Library Committee (1998-2000).
University Wide
Member of the Institutional Review Committee for Chemistry and PSPA.
Chair of the University Research Board (2009-2011).
Member of the Center for Teaching and Learning (CTL) advisory committee.
Member of the Strategic Review Committee-Team 4 on Research and Graduate
Education.
Member of the University Senate (2009-…).
Member of the University Research Board (2008-…).
Coordinator of the FAS Departments Assessment of Program Learning Outcomes
project.
Member of the FAFS expanded Advisory Committee for promotion (2008-09).
Moderator of Open meeting on the Self-Study Review for Accreditation (Nov. 2008).
Member of the Working Group V on Faculty for Accreditation (2007- 08).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
12/25
Member of the Task Force on admission requirements to the AUB medical school
(2007- 08).
Member of the University Learning Outcomes Coordination Committee (2006-09).
Member of the Medical Admission Committee of the Faculty of Medicine (2000-
present).
Member/Recorder of Task Team XIV for Accreditation: Assessment of Student
Learning (2001-03).
Regional and External Program
Dean Representative on all FAS projects with REP (2013-present).
Member/FAS coordinator of the Ahfad University for Women Team in Sudan (2014-
present).
Member of the AUB D-RASATI II Team in Lebanon (2014-present).
Member of the AUB D-RASATI Team in Lebanon (2011-2013).
Member of the AUB Team for the Qatar University project in Qatar (2007- 2008).
Member of the AUB Team for the Dhofar University project in the Sultanate of
Oman (2004- 2007).
Consultant for the Al Mana College of Health Sciences project in Saudi Arabia
(2004-05).
Member of the AUB Team for the Kingdom Schools project in Saudi Arabia (1999-
2003).
OTHER UNIVERSITY SERVICES
Coordinator of the AUB projects presented at Science Days 2010.
Co-organizer of the Materials Science Forum at AUB, a semester long series of
research lectures from AUB and international researchers working in the field of
materials science: (1998-99 with Prof. J. Schlenoff (Chemistry); 2003-04 and 2004-
05 with Prof. L. Halaoui, Chemistry).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
13/25
Representative (along with Prof. R. Sultan from Chemistry) of AUB and Lebanon at
the “International Conference on Materials Research and Education: Future Trends
and Opportunities” organized by the Materials Research Institute, Doha, Qatar, April
2005.
Judge of school students projects in the Science, Math and Technology Fair organized
by the Department of Education at AUB (2002-04).
Advisor to the Physics Student Society (2001-2004).
Organizer of the Physics Department Open House (1999-2003).
Presenter of the Faculty of Arts and Sciences programs at the AUB open house
(2002-04).
LANGUAGES: Fluent in English, French and Arabic.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
14/25
D- PUBLICATIONS
61- S. Isber, N. Skaff, M. Roumie and M. Tabbal, “Growth of Co2MnAl Thin Films by
Pulsed Laser Deposition”, European Journal of Physics: Web of Conferences 75,
03008 (2014).
60- N. Rahbany, M. Kazan, M. Tabbal, R. Tauk, J. Jabbour, J. Brault, B. Damilano and
J. Massies “Measurement of the effect of plasmon gas oscillation on the dielectric
properties of p- and n-doped AlxGa1−xN films using infrared spectroscopy” J. Appl.
Phys. 114, 053505 (2013).
59- I. Umezu, J. M. Warrender, S. Charnvanichborikarn, A. Kohno, J. S. Williams, M.
Tabbal, D. G. Papazoglou, X.-C. Zhang and M. J. Aziz, “Emergence of very broad
infrared absorption band by hyperdoping of silicon with chalcogens” J. Appl. Phys.
113 , 213501 (2013).
58- M. Kazan, M. Tabbal, P. Masri, “Infrared analysis of the effect of Ge at the
interface between 3C-SiC and Si” Diamond & Related Materials 22, p. 23 (2012).
57- M. Shamseddine, M. Kazan, M. Tabbal, “Model for the unpolarized infrared
reflectivity from uniaxial polar materials: Effects of anisotropy, free carriers, and
defects” Infrared Physics & Technology 55, p. 112 (2012)
56- W. Kassem, M. Tabbal, M. Roumie, “Pulsed Laser Deposition of Tungsten Thin
Films on Graphite” Advanced Materials Research 324, 77-80 (2011).
55- M. Roumie, B. Abdel Samad, M. Tabbal, M. Abi-Akl, M.-F. Blanc-Mignon, B.
Nsouli, “Effect of deposition temperature on the properties of sputtered YIG films
grown on quartz” Mater. Chem. Phys., 124, 188-191 (2010).
54- B.P. Bob, A. Kohno, S. Charnvanichborikarn, J. M. Warrender, I. Umezu, M.
Tabbal, J. S. Williams, M. J. Aziz, “Fabrication and Sub-Bandgap Optical
Properties of Silicon Supersaturated with Chalcogens by Ion Implantation and
Pulsed Laser Melting” J. Appl. Phys., 107, 123506- (2010).
53- M.Tabbal, Taegon Kim, David N. Woolf, Byungha Shin, Michael J. Aziz
“Fabrication and sub-bandgap absorption of single crystal Si supersaturated with Se
by pulsed laser mixing” Appl. Phys. A: Materials Science & Processing, 98, 589-
594 (2010).
52- S. Isber, E. Majdalani, M. Tabbal, T. Christidis, K. Zahraman, B. Nsouli “Study of
manganese oxide thin films grown by pulsed laser deposition” Thin Solid Films,
517, 1592-1595 (2009).
51- M. Tabbal, M. Abi-Akl, S. Isber, E. Majdalani, T. Christidis, “Synthesis of nano-
grained MnO2 thin films by laser ablation” Proc. SPIE 7201, 720104 (2009).
50- J. Bao, S. Charnvanichborikarn, Y. Yang, M. Tabbal, B. Shin, J. Wong-Leung, J. S.
Williams, M. J. Aziz and F. Capasso, “Point Defect Engineered Silicon Sub-
Bandgap LED at 1.218 mm” Proc. SPIE 6800, 68000T (2008).
49- M. Tabbal, T. Kim, J. M. Warrender, M. J. Aziz, B. L. Cardozo and R. S. Goldman,
“Formation of single crystal sulfur supersaturated silicon based junctions by pulsed
laser melting” J. Vac. Sci. Technol. B 25 1847-1852 (2007).
48- M. Tabbal, M.J. Aziz, C. Madi, S. Charnvanichborikarn, J.S. Williams, and T.C.
Christidis, "Excimer laser processing of novel materials for optoelectronic and
spintronic applications" Proc. SPIE 6458, 645803 (2007).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
15/25
47- J. Bao, M. Tabbal, T. Kim, S. Charnvanichborikarn, J. S. Williams, M. J. Aziz, and
F. Capasso, "Point defect engineered Si sub-bandgap light-emitting diode," Opt.
Express 15, 6727-6733 (2007).
46- M. Roumie, M. Tabbal, B. Nsouli, A. Said, “Determination of stoichiometry in
silicon carbide materials using Elastic Backscattering Spectrometry", Nuclear Inst.
and Methods in Physics Research B, 260 (2007) 637–641.
45- M. Tabbal, A. Said, E. Hannoun, T.C. Christidis, “Amorphous to crystalline phase
transition in pulsed laser deposited SiC”, Appl. Surf. Sci. 253 7050–7059 (2007).
44- C. Madi, M. Tabbal, T. Christidis, S. Isber, B. Nsouli and K. Zahraman
“Microstructural characterization of chromium oxide thin films grown by remote
plasma assisted pulsed laser deposition”, Journal of Physics: Conference Series 59
600–604 (2007).
43- M. Tabbal, S. Kahwagy , T. Christidis, B. Nsouli and K. Zahraman “Pulsed Laser
Deposition of nanostructured dichromium trioxide thin films” Thin Solid Films 515,
1976 (2006).
42- S. Isber, R. Awad , M. Tabbal, A.I. Abou-Aly, B. Nsouli, K. Zahraman. A.
Mansour and A. Faraj, “Superconductivity properties of Tl-1223 substituted by
Iron” Journal of Physics: Conference Series 43, 450 (2006),
41- M. Tabbal, T. Christidis, S. Isber, P. Mérel, M.A. El Khakani and M. Chaker, A.
Amassian and L. Martinu, “Correlation between the sp2 phase nanostructure and the
physical properties of unhydrogenated carbon nitride” J. Appl. Phys. 98, 044310
(2005).
40- S. Isber, M. Tabbal, T. Christidis, F. Terki and S. Charar “Exchange Coupling in
Spins Quartet of Dimeric Polyoxoanions [M4(H2O)2(GeW9O34)2]12-
(M = Mn2+
,
Cu2+
)”, J. Mag. Mag. Mater. 291, 985 (2005).
39- S. Isber, M. Tabbal, T. Christidis, S. Charar, F. Terki, M. Ishii, “Crystal-field
investigations and magnetic properties of Nd3+
-doped Bi4Si3O12”, Phys. Rev. B 71,
014405 (2005).
38- K. T. Holman, H. H. Hammud, S. Isber, M. Tabbal “One-dimensional coordination
polymer [Co(H2O)4(pyrazine)] (NO3)2.2H2O with intra- and inter- chain H-bonds :
synthesis, structures and magnetic properties”, Polyhedron 24, 221 (2005).
37- S. Isber, R. Awad , A.I. Abou-Aly, M. Tabbal and J. M. Kaouar, “Electric
Resistivity and Magnetic Susceptibility studies of Tl-1223 substituted by Cobalt”,
Supercond. Sci. Technol. 18, 311 (2005).
36- M. Tabbal, P. Mérel and M. Chaker, “Effect of process parameters on the
mechanical properties of carbon nitride thin films synthesized by plasma assisted
pulsed laser deposition” Appl. Phys. A. 79, 1365 (2004).
35- T. Christidis, M. Tabbal, S. Isber and S. Rizk, “Temperature dependence of the
electron paramagnetic resonance of unhydrogenated carbon nitride”, Diamond
Relat. Mater. 13, 1561 (2004).
34- M. Tabbal, T. Christidis, S. Isber, M. A. El Khakani, P. Mérel, and M. Chaker,
“Graphitic nanoclustering in pulsed laser deposited amorphous carbon and carbon
nitride thin films” Thin Solid Films, 453-454, 234 (2004).
33- P. Mérel, M. Tabbal and M. Chaker, “Phase segregation in pulsed laser deposited
carbon nitride thin films” Diamond Relat. Mater. 12, 1075 (2003).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
16/25
32- A. Errebbahi, F. Terki, S. Charar, C. Fau, S. Isber, M. Tabbal, T. C. Christidis, D.
Ravot, J. C. Tedenac and Z. Golacki “Investigation of the effect of annealing on the
magnetic properties of Sn1-xEuxTe single crystals”, J. Mag. Mag. Mater., 248, 68
(2002).
31- T.C. Christidis, S. Isber, M.Tabbal, U. Kortz and D. Ravot, “Magnetic properties of
cadmium copper tetrachloride tetrahydrate”, J. Mag. Mag. Mater., 242-245, 939
(2002).
30- J. Margot, F. Vidal, M. Chaker, T.W. Johnston, A. Aliouchouche, M. Tabbal, S.
Delprat, O. Pauna and D. Benhabib, “Sustaining power per electron for a large low-
pressure argon magnetoplasma reactor: experiment and isothermal model results”,
Plasma Sources Sci. Technol. 10, 556 (2001).
29- T. Christidis, M. Tabbal, S. Isber, M. A. El Khakani, and M. Chaker, “Comparative
ESR study of hydrogenated and non-hydrogenated amorphous silicon carbide thin
films”, Appl. Surf. Sci.184/1-4, 270 (2001).
28- P. Mérel, M. Chaker, M.Tabbal and H Pépin, “Structural and electrical
characteristics of epitaxial GaN thin films grown using a hybrid pulsed laser
deposition system, Appl. Surf. Sci. 177, 165 (2001).
27- M. Tabbal, M. Kazopoulo, T.C. Christidis and S. Isber, “Enhancement of the
molecular nitrogen dissociation levels by Ar dilution in surface wave sustained
plasmas” Appl. Phys. Lett. 78, 2131 (2001).
26- M.Tabbal, P. Mérel, M. Chaker and H Pépin, “Pulsed laser deposition of c-axis
oriented aluminum nitride thin films on silicon”, Eur. J. Phys.: AP. 14, 115 (2001).
25- S. Isber, T.C. Christidis, M.Tabbal, S. Charar and M. Goiran, “High-frequency
EPR of Co2+
in CdSe”, Physica B 293, 304 (2001).
24- M. Tabbal, T. Christidis, S. Isber, and M. Kazopoulo, “Nitrogen atom production in
N2, Ar/N2 and He/N2 surface wave discharges” ISPC-15 Proc., 6, 2237-2242
(2001).
23- M. Kazopoulo, M. Tabbal, T. Christidis, and S. Isber, “Characterization of a
nitrogen surface wave discharge for the deposition of nitride thin films”,
Proceedings of the 2nd
French-Lebanese Colloquium on Materials Science, 41
(2000).
22- M.Tabbal, S. Isber, T.C. Christidis, M.A. El Khakani and M. Chaker “Effect of
deposition temperature on the optical transmission and paramagnetic centers in
pulsed laser deposited amorphous silicon carbide thin films”, J. Appl. Phys. 88,
5127 (2000).
21- M.Tabbal, P. Mérel, M. Chaker, M.A. El Khakani, E.G. Herbert, B.N. Lucas and
M.E. O’Hern, “Synthesis of DLC thin films by PLD: optimization of process
parameters”, Surf. Coat. Technol., 116-119, 450 (1999).
20- P. Mérel, M. Chaker, H Pépin and M.Tabbal, “Epitaxial growth of GaN thin films
using a hybrid pulsed laser deposition system”, Mat. Res. Soc. Symp. Proc., 572,
401 (1999).
19- M.Tabbal, P. Mérel, M. Chaker, “Synthesis of nitride thin films by pulsed laser
deposition assisted by a nitrogen surface wave plasma”, ISPC-14 Proc., 3, 1099
(1999).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
17/25
18- M.Tabbal, P. Mérel, M. Chaker, M.A. El Khakani, E.G. Herbert, B.N. Lucas and
M.E. O’Hern, “Effect of laser intensity on the microstructural and mechanical
properties of pulsed laser deposited diamond-like-carbon thin films”, J. Appl. Phys.,
85, 3860 (1999).
17- P. Mérel, M.Tabbal, M. Chaker, A. Ricard and M. Moisan, “Influence of the field
frequency on the nitrogen atom yield in the remote plasma of an N2 high frequency
discharge”, Plasma Sources Sci. Technol., 7, 550 (1998).
16- P. Mérel, M.Tabbal, S. Moisa, M. Chaker and J. Margot, “Direct evaluation of the
sp3 carbon atom content in DLC thin films by XPS”, Appl. Surf. Sci., 136, 105
(1998).
15- M.Tabbal, P. Mérel, S. Moisa, M. Chaker, A. Ricard and M. Moisan, “XPS and
FTIR analysis of nitrogen incorporation in CNx thin films”, Surf. Coat. Technol.,
98, 1092 (1998).
14- P. Mérel, M. Tabbal, M. Chaker and M. Moisan, “The influence of atomic nitrogen
flux on the composition of carbon nitride thin films”, Appl. Phys. Lett., 71, 3814
(1997).
13- J. Margot, M. Chaker, L. St-Onge, M.Tabbal, A.Aliouchouche, O.Pauna, C.Alinot
andt C.Kliagine, “High-frequency magnetoplasmas in electronegative gases”, J.
Phys.IV C4, 7 (1997) 295.
12- M.Tabbal, M.Meunier, R.Izquierdo, B.Beau and A.Yelon, “Laser-CVD of W
schottky contacts on GaAs using WF6 and SiH4”, J. Appl. Phys., 81, 6607 (1997).
11- M.Meunier, R.Izquierdo, M.Tabbal, S.Evoy, P.Desjardins, M.-H.Bernier,
J.Berthomeu, N.Elyaagoubi, M.Suys, E.Sacher and A.Yelon, “Laser Induced
Deposition of W and Cu”, Mater. Sci. Eng., B45, 200 (1997).
10- M.Tabbal, R.Izquierdo, M.Meunier, C.Pépin and A.Yelon, “Surface
characterization in excimer laser induced deposition of W on GaAs from WF6 and
H2”, Appl. Surf. Sci., 108, 417 (1997).
9- M.Tabbal, P. Mérel, S. Moisa, M. Chaker, A. Ricard and M. Moisan, “X-ray
Photoelectron Spectroscopy of carbon nitride films deposited by graphite laser
ablation in a nitrogen post-discharge”, Appl. Phys. Lett. 69, 1698 (1996).
8- M.Meunier, P. Desjardins, M.Tabbal, N. Elyaagoubi, R.Izquierdo and A.Yelon,
“Laser processing of tungsten from WF6 and SiH4”, Appl. Surf. Sci., 86, 475
(1995).
7- M.Meunier, M.Suys, M.Tabbal, R.Izquierdo, A.Yelon et E.Sacher, “Excimer laser-
induced metallization for in-situ processing on Si and GaAs”, Appl. Surf. Sci.,
79/80, 208 (1994).
6- M.Meunier, P.Desjardins, R.Izquierdo, M.Tabbal and M.Suys, “Excimer Laser for
in-situ Processing in Microelectronics”, in "Excimer Lasers: the Tools,
Fundamentals of their interaction with matter, fields of applications", NATO ASI
Series, 265, 319 (1994).
5- M.Meunier, M.Tabbal, M.Suys, R.Izquierdo, A.Yelon, E.Sacher and S.Poulin,
“Excimer Laser-Induced Metallization for Si and GaAs Microelectronics”, SPIE
Proc., 2045, 84 (1993).
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
18/25
4- M.Tabbal, R.Izquierdo, M.Meunier and A.Yelon, "Surface Interaction Between
WF6 and GaAs under UV Illumination", MRS Symp. Proc. 282, 191 (1993).
3- A.Lecours, R.Izquierdo, M.Tabbal, M.Meunier and A.Yelon, “Laser Induced
Deposition of Tungsten on GaAs from WF6”, J. Vac. Sci. Technol., B11, 51 (1993).
2- M.Meunier, R.Izquierdo, P.Desjardins, M.Tabbal, A.Lecours and A.Yelon, "Laser
Direct Writing of Tungsten from WF6", Thin Solid Films, 218, 137 (1992).
1- M.Tabbal, A.Lecours, R.Izquierdo, M.Meunier and A.Yelon, "Surface Studies of
Laser Processing of W on GaAs from WF6", MRS Symp. Proc. 236, 117 (1992).
CONTRIBUTIONS TO INTERNATIONAL SCIENTIFIC MEETINGS
(Presenting author in underlined, * indicates invited presentation)
75- R. Abu Amer, M. Kazan, D. Patra, M. Tabbal, “Crystalline and optical properties
of ZnO nanoparticles synthesized by a solvent based technique”, poster
presentation, European Materials Research Society Spring Meeting, Lille, France,
May 2015.
74- G. Al Makdessi and M. Tabbal, Characterization of low pressure oxygen remote
plasma for the growth of functional oxide thin films, European Materials Research
Society Spring Meeting, Lille, France, May 2015.
73- M. Tabbal, S. Isber, N. Skaff, Growth of Cobalt Manganese Aluminum thin films
by Pulsed Laser Deposition”, poster presentation, Magnetism 2014, Manchester,
UK, April 2014.
72- M. Tabbal, N. Rahbany, M. Kazan, “IR reflectivity analysis of p-doped and n-
doped AlGaN”, poster presentation, European Materials Research Society Spring
Meeting, Strasbourg, France, May 2013.
71- M. Roumie, M. Bahja, M. Tabbal, “Characterization of Tyr Pottery Production
Using PIXE”, oral presentation, European Materials Research Society Spring
Meeting, Strasbourg, France, May 2013.
70- M. Tabbal, "Remote plasma oxidation of tungsten thin films”, poster presentation,
Plasma Physics Group Annual Conference, Oxford, UK, April 2012.
69- M.Tabbal, M. Kazan, “Probing the crystallinity and interface in 3C-SiC/Ge/Si
heterostructures by the infrared reflectivity technique”, poster presentation,
Interdisciplinary Surface Science Conference-18, Warwick, UK, April 2011.
68- M. Tabbal, M. Abi-Akl, M. Kazan, S. Isber, T. Christidis, “Phase control of
manganese dioxide thin films by plasma assisted pulsed laser deposition”, oral
presentation, Novel Aspects of Surfaces and Materials-3, Manchester, UK, April
2010.
67- M.Tabbal, W. Kassem, M. Roumie, G. Y. Antar, “Pulsed laser deposition of
tungsten thin films on graphite for magnetic fusion applications”, poster
presentation, Novel Aspects of Surfaces and Materials-3, Manchester, UK, April
2010.
66- G. Al Makdessi, M. Tabbal, N. Abdallah, G. Y. Antar, “Probe measurements in
low pressure expanding microwave plasmas”, Poster presentation, 10th
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
19/25
International Workshop on the Interrelationship between Plasma Experiments in
Laboratory and Space, Djurönäset, Sweden, June 2009.
65- M. Tabbal, M. Abi-Akl, D. Haidar, N. Abdallah, “Control of bonding and
nanostructural properties of manganese oxide films grown by plasma assisted PLD”,
oral presentation, European Materials Research Society Spring Meeting,
Strasbourg, France, June 2009.
64- M. Tabbal, M. Abi-Akl, S. Isber, T. Christidis, “Investigation of the growth of
nano-grained MnO2 thin films by laser ablation”, poster presentation, European
Materials Research Society Spring Meeting, Strasbourg, France, June 2009.
63- M. Roumie, B. Abdel Samad, M. Tabbal, M. Abi Akl, M.-F. Blanc-Mignon, B.
Nsouli, “Effect of deposition temperature on the properties of sputtered YIG films”
poster presentation, European Materials Research Society Spring Meeting,
Strasbourg, France, June 2009.
63- A. Kohno, B. Bob, S. Charnvanichborikarn, J. Warrender, M. Tabbal, D.
Papazoglou, J. S. Williams, and M. J. Aziz, “Sub-bandgap light absorption and
carrier concentration in chalcogen doped silicon single crystal”, 69th Autumn
Meeting of The Japan Society of Applied Physics, Aichi (Japan), Sept. 2008.
62- M. Tabbal, M. Abi-Akl, N. Abdallah, S. Isber, “Synthesis of nano-grained MnO2
thin films by laser ablation” Oral presentation, SPIE Photonics West 2009, San Jose
(CA), USA, January 2009.
61- T. Christidis, D. Haidar-Ahmad, M. Abi-Akl, C. Madi, M. Tabbal, “Measurement
of atomic oxygen concentration in a microwave plasma for film growth by PLD”
Poster presentation, 2nd
General conference of the Condensed Matter Division of
the European Physical Society, Sapienza Università di Roma, Rome (Italy) 2008.
60- M. Abi-Akl, M. Tabbal, E. Majdalani, S. Isber, T. Christidis, “Synthesis of nano-
grained MnO2 thin films by Pulsed Laser Deposition” Poster presentation, 1st
International School on “Laser-surface interactions for new materials production:
tailoring structure and properties”, Venice, (Italy) 2008.
59- S. Charnvanichborikarn, Y. Yang, J. Bao, M. Tabbal, T. Kim, Y.Y.J. Wong-Leung,
J.S. Williams, M.J. Aziz, “Point Defect Engineered Sub-Bandgap Si Light-Emitting
Diode” Oral presentation, IUMRS-International Conference on Electronic Materials
2008, Sydney (Australia) July 2008.
58- B. Bob, S. Charnvanichborikarn, J. M. Warrender, A. Kohno, M. Tabbal, J.S.
Williams, D. Papazoglou, M.J. Aziz, “Chalcogen Doping for Infrared
Optoelectronic Si” Oral presentation, IUMRS-International Conference on
Electronic Materials 2008, Sydney (Australia) July 2008.
57*- M. Tabbal, “Control of the structural and bonding properties of oxide thin films
grown by remote plasma assisted pulsed laser deposition” Oral presentation , PLD
2008, Huckelhoven (Germany) June 2008.
56- J. Warrender, B. Bob, M. Aziz, S. Charnvanichborikarn, J. Williams, M. Tabbal, A.
Kohno “Chalcogen dopants for infrared optoelectronic Si” Poster presentation,
American Physics Society Meeting, New Orleans (LA), March 2008.
55- M. Tabbal, M. J. Aziz, F. Zhao and D. N. Woolf, “Fabrication of Se supersaturated
Si by pulsed laser mixing”, SPIE Photonics West 2008, Oral presentation, San Jose
(CA), Jan. 2008.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
20/25
54*- J. Bao, M. Tabbal, S. Charnvanichborikarn, J. S. Williams, M. J. Aziz and F.
Capasso, “Point Defect Engineered Silicon Sub-Bandgap LED at 1.218 mm” Invited
oral presentation, SPIE, Microelectronics, MEMS, and Nanotechnology, Australian
National University, Canberra (Australia) Dec. 2007.
53*- J. Bao, M. Tabbal, T. Kim, S. Charnvanichborikarn, J. S. Williams, M. J. Aziz and
F. Capasso, “Laser Processing of a Point Defect Engineered Silicon Sub-Bandgap
LED at 1.218 mm” Invited oral presentation, European Materials Research Society
Spring Meeting, Strasbourg (France), May 2007
52- M. Tabbal, T. G. Kim, J. M. Warrender, D. N. Woolf, M. J. Aziz, “Synthesis of
highly absorbing chalcogen super-saturated silicon by pulsed laser melting” Poster
presentation, European Materials Research Society Spring Meeting, Strasbourg
(France), May 2007
51*- M. Tabbal, M. J. Aziz, C. Madi S. Charnvanichborikarn, J. S. Williams, T. C.
Christidis, “Excimer laser processing of novel materials for optoelectronic and
spintronic applications”, Photonics West 2007, Invited oral presentation, San Jose
(CA) Jan. 2007.
50- M. Tabbal, T. G. Kim, J. M. Warrender, M. J. Aziz, J. M. Bao, F. Capasso, B.
Cardozo, R. S. Goldman and J. S. Williams, “Optical and optoelectronic properties
of laser crystallized silicon supersaturated with sulfur” Gordon Research
Conference on Defects in Semiconductors, Poster presentation, New London (NH),
July 2006.
49- T. Christidis, E. Hannoun, M. Tabbal, “Investigation of the effect of substrate
temperature and annealing on pld-grown SiC thin films” 11th International
Conference on New Diamond Science and Technology (ICNDST) and 9th Applied
Diamond Conference (ADC), Rayleigh (NC), May 2006.
48- M. Tabbal, S. Kahwagy, T. Christidis, B. Nsouli. K. Zahraman, W. Stein and U.
Hangen, “Relationship Between the Nanostructure and Mechanical Properties of
Pulsed Laser Deposited Dichromium Trioxide Thin Films”, Oral presentation at the
Int. Conf. Met. Coat. Thin Films ’06, San Diego (CA), May 2006.
47- M. Tabbal, E. Hannoun, T.C. Christidis, S. Isber, “Electron Spin Resonance
investigation of the amorphous to crystalline transition in SiC thin films”, Poster
presentation at the 52nd
American Vacuum Society meeting Boston (MA),
November 2005.
46- C. Madi, M. Tabbal, T. Christidis, S. Isber, B. Nsouli and K. Zahraman
“Microstructural characterization of chromium oxide thin films grown by remote
plasma assisted pulsed laser deposition” Poster presentation at 8th
Conf. On Laser
Ablation (COLA ‘05) Banff (Canada), September 2005.
45- S. Isber, R. Awad , M. Tabbal, A.I. Abou-Aly, B. Nsouli, K. Zahraman. A.
Mansour and A. Faraj, “Superconductivity properties of Tl-1223 substituted by
Iron”, Poster presentation at the 7th
European Conference on Applied
Superconductivity (EUCAS 05) Vienna (Austria), September 2005.
44- M. Tabbal, S. Kahwaji, T. C. Christidis, S. Isber, B. Nsouli, K. Zahraman
“Mechanical properties of Cr2O3 coatings synthesized by laser ablation”, poster
presentation at European Materials Research Society (E-MRS) Spring Meeting,
Strasbourg (France), May 2005.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
21/25
43- M. Tabbal, T. C. Christidis, S. Isber, C. Madi and H. Itani, “Development of a
remote plasma assisted pulsed laser deposition system for the growth of oxide
materials”, poster presentation at European Materials Research Society (E-MRS)
Spring Meeting, Strasbourg (France), May 2005.
42- M. Tabbal, S. Kahwaji, T.C. Christidis, S. Isber, B. Nsouli, K. Zahraman, “Pulsed
laser deposition of Cr2O3 films”, poster presentation at the ICPEPA-4, Lecches
(Italy) September 2004.
41- S. Isber, M. Tabbal, T. Christidis, F. Terki and S. Charar “Exchange Coupling in
Spins Quartet of Dimeric Polyoxoanions [M4(H2O)2(GeW9O34)2]12-
(M = Mn2+
,
Cu2+
)”, oral presentation at JEMS 04, Dresden (Germany), September 2004.
40- M. Tabbal, T. Christidis and S. Isber, M. A. El Khakani, P. Mérel, and M. Chaker
“Correlation between the sp2 phase microstructure and physical properties of CNx”,
oral presentation at European Materials Research Society (E-MRS) Spring Meeting,
Strasbourg (France), May 2004.
39- M. Tabbal, S. Kahwaji, T.C. Christidis, S. Isber, B. Nsouli, K. Zahraman, “Growth
of Chromium oxides by Laser Ablation of Cr2O3”, oral presentation at European
Materials Research Society (E-MRS) Spring Meeting, Strasbourg (France), May
2004.
38- M. Tabbal, A. Said, T.C. Christidis, S. Isber, “Amorphous to crystalline phase
transition in pulsed laser deposited SiC, poster presentation at European Materials
Research Society (E-MRS) Spring Meeting, Strasbourg (France), May 2004.
37- T.C. Christidis, M. Tabbal, S. Isber, J.C. Orlianges and A. Catherinot, “EPR studies
of metal doped carbon films”, poster presentation at European Materials Research
Society (E-MRS) Spring Meeting, Strasbourg (France), May 2004.
36- M. Tabbal, P. Mérel and M. Chaker, “Effect of process parameters on the
mechanical properties of carbon nitride thin films synthesized by plasma assisted
pulsed laser deposition” oral presentation at 7th
Conf. On Laser Ablation (COLA
‘03) Crete (Greece), October 2003.
35- T. Christidis, M. Tabbal, S. Isber and S. Rizk, “Temperature dependence of the
electron paramagnetic resonance of unhydrogenated carbon nitride”, poster
presentation at Diamond 2003, Salzburg (Austria), September 2003.
34- M. Tabbal, “Nitrogen post-discharge assisted pulsed laser deposition of carbon
nitride thin films” oral presentation at the Conf. Int. Plasmas (CIP), Juan-Les-Pins
(France) July 2003.
33- M. Tabbal, T. Christidis and S. Isber, M. A. El Khakani, P. Mérel, and M. Chaker
“Graphitic nanoclustering in pulsed laser deposited DLC and CNx thin films”, poster
presentation at European Materials Research Society (E-MRS) Spring Meeting,
Strasbourg (France), June 2003.
32- P. Mérel, M. Tabbal and M. Chaker, “Phase segregation in pulsed laser deposited
carbon nitride thin films” poster presentation at Diamond 2002, Granada (Spain),
September 2002.
31- N. Braidy, M. A. El Khakani, M. Tabbal, T. Christidis and S. Isber, “Synthesis of
single wall carbon nanotubes by the double pulse laser evaporation technique”, oral
presentation at European Materials Research Society (E-MRS) Spring Meeting,
Strasbourg (France), June 2002.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
22/25
30- M. Tabbal, “Pulsed laser deposition of superhard amorphous carbon based thin
films” oral presentation at the Third French-Lebanese Conf. On Materials Science,
Beirut (Lebanon), May 2002.
29- M. Tabbal, S. Rizk, T. Christidis and S. Isber “Transport mechanisms in carbon
nitride materials” poster presentation at the Third French-Lebanese Conf. On
Materials Science, Beirut (Lebanon), May 2002.
28- T.C. Christidis, S. Isber, M.Tabbal, U. Kortz and D. Ravot, “Magnetic properties of
cadmium copper tetrachloride tetrahydrate”, Oral presentation at JEMS ‘01
Grenoble, (France) September 2001.
27- M. Tabbal, T. Christidis, S. Isber, and M. Kazopoulo, “Nitrogen atom production in
N2, Ar/N2 and He/N2 surface wave discharges”, poster presentation at the
International Symposium on Plasma Chemistry ISPC-15, Orléans, (France), July
2001.
26- M.Tabbal, P. Mérel and M. Chaker, “Optical emission studies of pulsed N2 RF
discharges and post-discharges”, poster presentation at ISPC-15, Orleans (France),
July 2001.
25- M.Tabbal, P. Mérel and M. Chaker, “Remote plasma assisted pulsed laser
deposition of CNx and GaN thin films”, oral presentation at European Materials
Research Society Spring Meeting (E-MRS), Strasbourg (France), June 2001.
24- T. Christidis, M. Tabbal, S. Isber, M. A. El Khakani, and M. Chaker, “Comparative
ESR study of hydrogenated and non-hydrogenated amorphous silicon carbide thin
films”, poster presentation at European Materials Research Society (E-MRS) Spring
Meeting, Strasbourg (France), June 2001.
23- M. Tabbal, T. Christidis, S. Isber, M.A. El Khakani, P. Mérel and M. Chaker,
“Paramagnetic centers in carbon based thin films”, poster presentation at the
Materials Research Society Spring Meeting, San Francisco, CA (U.S.A), April
2001.
22- T. Christidis, M. Tabbal, S. Isber, P. Mérel and M. Chaker, “Effect of nitrogen
incorporation on the paramagnetic centers in pulsed laser deposited amorphous
carbon thin films”, poster presentation at the Diamond 2000 Conference, Porto,
Portugal, September 2000.
21- M. Tabbal, P. Mérel, T. Christidis, S. Isber and M. Chaker, “Effect of laser
intensity on the properties of CNx thin films synthesized using a hybrid pulsed laser
deposition system”, poster presentation at the Gordon Research Conference “Laser
Interaction with Materials” Andover, NH (U.S.A.) June 2000.
20- P. Mérel, M. Chaker, M.Tabbal and H Pépin, “Structural and electrical
characteristics of epitaxial GaN thin films grown a hybrid pulsed laser deposition
system”, oral presentation at the Micronet Annual Workshop, Ottawa (Canada),
April 2000.
19- T. Christidis, M. Tabbal, S. Isber, M.A. El Khakani and M. Chaker, “Investigation
of dangling bond content in pulsed laser deposited amorphous silicon carbide thin
films by electron spin resonance”, poster presentation at the 22nd
International EPR
Symposium, Denver (U.S.A.) August 1999.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
23/25
18- M.Tabbal, P. Mérel and M. Chaker, “Synthesis of nitride thin films by pulsed laser
deposition assisted by a nitrogen surface wave plasma”, oral presentation at ISPC-
14, Prague (Czech Republic), August 1999.
17- P. Mérel, M. Chaker and M.Tabbal, “Epitaxial growth of GaN thin films using a
hybrid pulsed laser deposition system”, poster presentation at the MRS Spring 99
Meeting, San Fransisco (U.S.A.) April 1999.
16- M.Tabbal, P. Mérel, M. Chaker, M.A. El Khakani, E.G. Herbert, B.N. Lucas and
M.E. O’Hern, “Synthesis of DLC thin films by PLD: Optimization of process
parameters”, oral presentation at PSE ’98, Garmisch-Partenkirchen (Germany),
September 1998.
15 P. Mérel, M. Chaker, A. Ricard, M. Moisan and M.Tabbal, “Influence of the
applied field frequency on the concentration of nitrogen atoms produced by a N2
surface-wave discharge”, poster presentation at ESCAMPIG 98, Dublin (Ireland)
August 1998.
14- M.Tabbal, O. Pauna, M. Chaker and J. Margot, “A surface wave based high-density
plasma source operated at 200 MHz”, poster presentation at the ICPIG XXIII,
Toulouse (France), July 1997.
13- P. Mérel, M.Tabbal, M. Chaker, A. Ricard and M. Moisan, “A high flux N atom
source based on a HF N2 discharge”, poster presentation at the ICPIG XXIII,
Toulouse (France), July 1997.
12*- J. Margot, M. Chaker, L. St-Onge, M.Tabbal, A.Aliouchouche, O.Pauna, C.Alinot
and C.Kliagine, “High-frequency magnetoplasmas in electronegative gases”, invited
oral presentation at the ICPIG XXIII, Toulouse (France), July 1997.
11- P. Mérel, Y. Beaudoin, M. Chaker, S. Delprat, M.A. El Khakani, S. Moisa, M.
Moisan, H. Pépin and M.Tabbal, “Synthesis of thin films materials by pulsed laser
deposition”, Micronet Annual Workshop, Ottawa (Canada), February 1997.
10- M.Tabbal, P. Mérel, S. Moisa, M. Chaker, A. Ricard and M. Moisan, “XPS and
FTIR of CNx thin films”, oral presentation at the fifth Int. Conf. On Plasma and
Surface Engineering , Garmish-Partenkirchen (Germany), September 1996.
9- F. Bounasri, M. Chaker, M.A. El Khakani, E. Gat, J. Margot, P. Mérel, S. Moisa, C.
Montcalm, J.F. Pelletier, H. Pépin, L. St-Onge and M. Tabbal, “Recent
developments for sub-quarter micron fabrication”, Micronet Annual Workshop,
Ottawa (Canada), January 1996.
8- M.Tabbal, M.Meunier, R.Izquierdo and A.Yelon, “Excimer Laser-CVD of W
Schottky diodes on GaAs using SiH4 and WF6”, poster presentation at the 7th
Canadian Conf. On Semiconductor Technology, Ottawa (Canada), August 1995.
7*- M.Meunier, M.Tabbal, N.Elyaagoubi, P.Desjardins, R.Izquierdo and A.Yelon,
“Laser Processing of Tungsten and its silicides from WF6 and SiH4”, invited oral
presentation at E-MRS, Strasbourg (France), May 1994.
6- M.Meunier, M.Suys, M.Tabbal, R.Izquierdo, A.Yelon and E.Sacher, “Excimer
laser-induced metallization for in-situ processing on Si and GaAs”, oral
presentationat the First International Conference on Photo-excited Processes and
Applications, Sendai (Japan), October 1993.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
24/25
5*- M.Meunier, P.Desjardins, R.Izquierdo, M.Tabbal and M.Suys, “Excimer Laser for
in-situ Processing in Microelectronics”, invited oral presentation at the NATO ASI
Workshop on Excimer Lasers: the Tools and the Applications NATO, Porto
Elounda Mare (Greece), September 1993.
4- M.Meunier, M.Tabbal, M.Suys, R.Izquierdo, A.Yelon, E.Sacher and S.Poulin,
“Excimer Laser-Induced Metallization for Si and GaAs Microelectronics”, oral
presentation at SPIE: Québec Optics 93, Québec (Canada), August 1993.
3- M.Tabbal, R.Izquierdo, M.Meunier and A.Yelon, “Surface Interaction Between
WF6 and GaAs under UV Illumination”, oral presentation at MRS, Boston,
December 1992.
2- M.Tabbal, C.Pépin, R.Izquierdo, M.Meunier and A.Yelon, “Characterization of
Laser-CVD of W on GaAs using WF6”, poster presentation at the 6th
Canadian
Conf. On Semiconductor Technology, Ottawa (Canada), August 1992.
1- M.Tabbal, A.Lecours, R.Izquierdo, M.Meunier and A.Yelon, “Surface Studies of
Laser Processing of W on GaAs from WF6”, oral presentation at MRS, Boston
(USA), December 1991.
CONTRIBUTIONS TO REGIONAL/NATIONAL SCIENTIFIC MEETINGS
(Presenting author in underlined, * indicates invited contribution)
8*- M. Tabbal, “Using laser to synthesize new materials: Pulsed Laser Deposition of
Thin Films”, Invited oral presentation at the First Regional Conference on Laser
Applications, Damascus, November 2002.
7- M. Tabbal, M. A. El- Khakani, P. Mérel, M. Chaker, T. Christidis and S. Isber,
“Pulsed Laser Deposition of Superhard Amorphous Carbon Based Thin Films” Oral
presentation at the 3rd
French-Lebanese conference on Materials Science, Beirut,
May 2002.
6- S. Rizk, M. Tabbal, T. Christidis, S. Isber, “Transport mechanisms in carbon nitride
CNx (0.16=x=0.25) materials” Poster presentation at the 3rd
French-Lebanese
conference on Materials Science, Beirut, May 2002.
5- M. Tabbal, M. Kazopoulo, T. Christidis and S. Isber “Investigation of nitrogen atom
production in Ar/N2 and He/N2 plasmas”, Oral presentation at the 14th
Science
meeting (LAAS), Beirut, November 2000.
4- T. C. Christidis, S. Isber, M.Tabbal, S. Charar and Z. Golacki, “Magnetization and
electron paramagnetic resonance of Pb1-xNdxSe and Pd1-xYbxSe compounds”, Poster
presentation at the 2nd
French-Lebanese conference on Materials Science, Beirut,
May 2000.
3- S. Isber, T.C. Christidis, M.Tabbal, S. Charar and M. Goiran, “High-frequency EPR
of Co2+
in CdSe and magnetization steps”, Poster presentation at the 2nd
French-
Lebanese conference on Materials Science, Beirut, May 2000.
________________________________________________________________________
______________
CV: Prof. Malek Tabbal, Department of Physics
American University of Beirut, Lebanon
25/25
2- M. Tabbal, M. Kazopoulo, T. Christidis and S. Isber “Characterization of an N2
surface wave discharge for the deposition of nitride thin films”, Oral presentation at
the 2nd
French-Lebanese conference on Materials Science, Beirut, May 2000.
1- M. Tabbal, “Environmental and Biotechnological Applications of Plasma-Based
Processes”, Oral Presentation at the Int. Conf. on Biotechnologies as a Catalyst for
National Development, Beirut, Oct. 1999.