mapei general catalogue me jan 2013 uae

GENE

RAL

CATA

LOGU

E, M

IDDL

E EA

ST J

ANUA

RY 2

013

HEAD OFFICEMAPEI S.p.A. Via Cafiero, 22 - 20158 MilanTel. +39-02-37673.1 Fax +39-02-37673.214Internet: www.mapei.comE-mail: [email protected]

GENERAL CATALOGUE

MIDDLE EAST

JANUARY

2013

ADHESIVES • SEALANTS • CHEMICAL PRODUCTS FOR BUILDING

C.P

. MK

014

(UA

E) 0

1/13

UNITED ARAB EMIRATESI.B.S (INNOVATIVE BUILDING SOLUTIONS) LLC P.O. Box: 73869, Dubai - United Arab EmiratesTel. +971-4-815 6666 Fax +971-4-815 6655Internet: www.mapei.aeE-mail: [email protected]

GENERAL CATALOGUEMIDDLE EAST

JANUARY

2013

2

INDEX BY SECTOR

12 1. SCREEDS AND SMOOTHING COMPOUNDS 14 1.1 Screeds 15 1.2 Sand and cement screeds 15 1.3 Smoothing compounds 18 1.4 Products for levelling substrates

20 2. PRODUCTS FOR SOUNDPROOFING

24 3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS

34 4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 36 4.1 Hydraulic binder based adhesives 40 4.2 Synthetic resin-based adhesives 41 4.3 Reactive adhesives

44 5. GROUTS FOR CERAMIC TILES 46 5.1 Cementitious grouts 47 5.2 Epoxy grouts 48 5.3 Ready-to-use paste products

50 6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE

54 7. ELASTIC SEALANTS AND ADHESIVES 56 7.1 Acetic silicone sealants 57 7.2 Polyurethane sealants and adhesives 59 7.3 Neutral silicone sealants 59 7.4 Hybrid sealants and adhesives 60 7.5 Other sealants 62 7.6 Adhesive for PVC 62 7.7 Accessories and primers for sealants

64 8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET 66 8.1 Adhesives for wooden and laminate floors 67 8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet

72 9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 74 9.1 Adhesives in water dispersion 77 9.2 Reactive adhesives 78 9.3 Adhesives for synthetic grass 79 9.4 Polychloroprenic contact adhesive 79 9.5 Cementitious adhesive

80 10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS

82 10.1 Complementary products for laying ceramic tiles and stone material 83 10.2 Complementary products for laying resilient and textile coverings 84 10.3 Accessories, abrasive disks and products for the maintenance of parquet

90 11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 92 11.1 Resin based products100 11.2 Cementitious based products101 11.3 Complementary products for resin and cementitious floors

106 12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCEPlease refer to the relevant technical data sheet on www.mapei.ae for more information.

3

110 13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS112 13.1 Consolidating masonry and render by injecting slurry112 13.2 Consolidating various types of weak and crumbly substrates (porous stone, brickwork,

tuff, installation mortar, render, etc.) by impregnating113 13.3 Horizontal chemical barrier against capillary rising damp113 13.4 Dehumidifying masonry with binders and mortars for render115 13.5 Lime based transpirant render115 13.6 “Structural” reinforced render116 13.7 Skimming of dehumidifying transpirant and structural renders117 13.8 Installing and pointing brick, stone, tuff and mixed masonries

118 14. RESTORATION OF WOODEN STRUCTURES

122 15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS

126 16. PRODUCTS FOR THE RESTORATION OF CONCRETE128 16.1 Protection of steel reinforcement rods 129 16.2 Repairs to concrete with compensated-shrinkage mortar and binders

136 17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES

144 18. PRODUCTS FOR ANCHORING AND RAPID FIXING

150 19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE

154 20. PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES

158 21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING160 21.1 Strengthening concrete and steel structures167 21.2 Strengthening masonry structures

168 22. PRODUCTS FOR THERMAL INSULATION

176 23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS

180 24. WALL PROTECTIVE AND DECORATIVE COATINGS

194 25. WATERPROOFING SYSTEMS196 25.1 Waterproofing structures below ground level200 25.2 Waterproofing structures above ground level205 25.3 Sealing and waterproofing joints and fillets

210 26. ADMIXTURES FOR CONCRETE212 26.1 Admixtures for concrete221 26.2 Superficial form-release agents and curing compounds

224 27. MAPEI SOLUTIONS - INSTALLATION OF STONE MATERIALS

228 28. SELECTION CHARTS

4

ALPHABETICAL INDEX

PAGE PAGE PAGEIdrostop Mastic 206Idrostop PVC BI/BE ME 206Idrostop Soft 206Injectors Ø 23 161Isolastic 37

K Kerabond T 37

Keracolor FF 46Keracolor GG 46Keracolor PPN 52Keracolor SF 46Keracrete 38Keracrete Powder 38Keraflex 38Keraflex Easy 38Keraflex Maxi S1 39Kerafloor 39Keralastic 41Keralastic T 41Keranet 82Kerapoxy 42/47Kerapoxy Adhesive 42Kerapoxy Cleaner 82Kerapoxy CQ 47Kerapoxy Design 47Kerapoxy IEG 48Kerapoxy P 48Keraseal 82Keraset 39

L Lampocem 146

Lamposilex 196Lignobond 66Livigum 27

M Malech 28/186

Mape-Antique Allettamento 117Mape-Antique CC 113Mape-Antique F21 112Mape-Antique FC Civile 116Mape-Antique FC Grosso 116Mape-Antique FC Ultrafine 116Mape-Antique I 112Mape-Antique Intonaco NHL 115Mape-Antique LC 113Mape-Antique MC 113Mape-Antique MC Macchina 114Mape-Antique Rinzaffo 114Mape-Antique Strutturale NHL 115/117Mape-Asphalt Repair 0/8 108Mapeair AE 10 216Mapeband 206Mapeband PE 120 207Mapeband TPE 207Mapecem 14Mapecem Pronto 14Mapecoat DW 25 92/186Mapecoat I 24 92Mapecoat I 600 W 28/92Mapecoat I 600 W Lucido 28/92Mapecoat I 620 W 93Mapecoat I 650 WT 93Mapecoat W 186Mapecolor Paste 93Mapecontact 79Mapecrete Creme Protection 93Mapecrete LI Hardener 94Mapecrete Stain Protection 94Mapecryl Eco 74Mapecure CA 222Mapecure E 222Mapecure S 222Mapecure SRA 129/216Mapefast C 216Mapefast CF/P and Mapefast CF/L 216Mapefer 128Mapefer 1K 128Mapefibre NS12/NS18 217Mapefibre ST24/ST42 15/217Mapefill 146Mapefill GP ME 146Mapefill R 146Mapefill SP ME 147Mapefinish 138Mapefix EP 147Mapefix PE SF 147Mapefix VE SF 147Mapeflex AC-FR 60Mapeflex AC-P 60Mapeflex AC-PRO 60Mapeflex AC4 60

Mapeflex Blackfill 61Mapeflex Firestop 1200°C 61Mapeflex MS45 59Mapeflex PB25 57Mapeflex PB27 57Mapeflex PU20 57Mapeflex PU21 57Mapeflex PU30 58/207Mapeflex PU40 58/207Mapeflex PU45 58/208Mapeflex PU50 SL 58/208Mapeflex PU65 59Mapefloor Binder 930 94Mapefloor Cleaner ED 102Mapefloor CPU/HD 94Mapefloor CPU/MF 95Mapefloor Decor 700 95Mapefloor EP19 95Mapefloor Filler 102Mapefloor Finish 50 95Mapefloor Finish 52 W 96Mapefloor Finish 53 W/L 96Mapefloor Finish 54 W/S 96Mapefloor Finish 55 96Mapefloor Finish 630 97Mapefloor I 300 SL 97Mapefloor I 300 SL TRP 97Mapefloor I 320 SL CONCEPT 97Mapefloor I 350 SL 98Mapefloor I 500 W 98Mapefloor I 900 98Mapefloor I 910 98Mapefloor I 914 99Mapefloor Maintenance Kit 102Mapefloor PU 400 99Mapefloor PU 410 99Mapefloor Wax Remover 102Mapefluid N140 217Mapefluid N180 217Mapefluid N190 218Mapefluid N300 218Mapefluid N350 218Mapefluid N360 218Mapefluid N400 219Mapefluid N400 PC 219Mapefluid N500 219Mapefluid PZ500 219Mapefluid PZ504 220Mapefoam 62/208Mapeform Eco 31 223Mapeform Eco 61 223Mapeform Eco 91 223Mapeform Eco Oil 223Mapegel 50 196MapeGlitter 48Mapegrid B 250 161Mapegrid G 120 162Mapegrid G 220 162Mapegrout 430 129Mapegrout BM 129Mapegrout Fast-Set 129Mapegrout FMR 130Mapegrout Hi-Flow 130Mapegrout Hi-Flow GF 130Mapegrout Hi-Flow TI 20 108/130Mapegrout LM2K 131Mapegrout SV 108/131Mapegrout SV Fiber 108/131Mapegrout SV T 109/131Mapegrout T60 ME 132Mapegrout T80 132Mapegrout ME05 132Mapegrout ME06 132Mapegrout Thixotropic 133Mapegum PU 1K 202Mapegum WPS 202Mapelastic 202Mapelastic AquaDefense 202Mapelastic Foundation 197Mapelastic Guard 138Mapelastic Smart 203Mapelay 83Mapelectric CP1 84Mapelux Lucida 103Mapelux Opaca 103Mapenet 150 203Mapeplast CNI 220Mapeplast LA Powder 220Mapeplast RP100 220Mapeplast RP200 221Mapeprim SP 28

A Additix PE 101

Adesilex FIS13 170Adesilex G19 77Adesilex G19 Conductive 77Adesilex G20 77Adesilex MT32 74Adesilex P4 18/36Adesilex P9 36Adesilex P9 Express 36Adesilex P10 36Adesilex P22 40Adesilex PG1 152/160Adesilex PG1 Rapid 152/160Adesilex PG2 152/160Adesilex PG4 152/205Adesilex T Super 62Antipluviol 182Antipluviol S 182Antipluviol W 182Aquaflex 178/200Aquaflex Roof 201Aquaflex Roof HR 201

B Biblock 26 C Carboplate 160

Carbotube 161Cleaner H 84Cleaner L 85Colorite Beton 182Colorite Matt 183Colorite Performance 183Consolidante 8020 112

D Drain Front 201

Drain Vertical/Drain Lateral 201Duresil EB 183Dursilite 183Dursilite Matt 184Dynamon MR1000 212Dynamon PC1100 212Dynamon SC950 15/212Dynamon SP5100 212Dynamon SP5300 213Dynamon SP5600 213Dynamon SP5610 213Dynamon SR1000 213Dynamon SR1300 214Dynamon SR1380 214Dynamon SR3300 214Dynamon SR3500 214Dynastone Color 100

E Eco Prim Grip 26

Eco Prim PU 1K 26Eco Prim PU 1K Turbo 26Eco Prim T 27Elastocolor Net 184Elastocolor Paint 184Elastocolor Primer 184Elastocolor Rasante 185Elastocolor Rasante SF 185Elastocolor Tonachino Plus 185Elastocolor Waterproof 185Elastorapid 37Epojet 153/161Epojet LV 153Eporip 27/153Eporip Turbo 27/153Epoxy Speed 101Expancrete 215Expanfluid ME 215

F Fiberplan 15

Fix & Grout Brick 40Flexcolor 48Form-Release Agent DMA 1000 221Form-Release Agent DMA 2000 222Fuga Fresca 82Fugolastic 46

G Granirapid 37/79 H I Idrocrete DM 215

Idrocrete S 215Idrosilex 196Idrosilex Pronto 196Idrostop 205Idrostop B25 205

Please refer to the relevant technical data sheet on www.mapei.ae for more information.

5

PAGE PAGE PAGEMapeproof 197Mapeproof CD 197Mapeproof LW 197Mapeproof Mastic 198Mapeproof Seal 198Mapeproof Swell 198Mapequarz 83Maperod C 162Maperod G 162Mapeshield E 25 128Mapeshield I 128Mapeshield S 156Mapesil 300°C 56Mapesil AC 56/208Mapesil BM 59Mapesil LM 59Mapesil Z 56Mapesil Z Plus 56Mapesilent Band R 22Mapesilent Panel 22Mapesilent Roll 22Mapesilent Tape 22Mapesilent Underwall 23Mapesonic CR 23Mapesonic Strip 23Mapestone PFS 2 52Mapestone PFS PCC 2 52Mapestone TFB 60 52Mapestop 113Mapetex Sel 203Mapetex System 83Mapetherm AR1 170Mapetherm AR1 GG 170Mapetherm Ba 170Mapetherm Cork 171Mapetherm Dripnose Bead 171Mapetherm EPS 171Mapetherm FIX 171Mapetherm FIX 9 172Mapetherm FIX B 172Mapetherm M. Wool 172Mapetherm Net 172Mapetherm Profil 173Mapetherm Profil Ba 173Mapetherm Profil E 173Mapetherm Profil V 173Mapetherm Profil W 174Mapetherm Tile Fix 15 83Mapetherm XPS 174Mapetop N AR6 100Mapewood Gel 120 120Mapewood Paste 140 120Mapewood Primer 100 120MapeWrap 11 163MapeWrap 12 163MapeWrap 21 163MapeWrap 31 163MapeWrap B UNI-AX 164MapeWrap C BI-AX 164MapeWrap C Fiocco 164MapeWrap C QUADRI-AX 164MapeWrap C UNI-AX 165MapeWrap EQ Adhesive 165MapeWrap EQ Net 165MapeWrap G Fiocco 165MapeWrap G QUADRI-AX 166MapeWrap G UNI-AX 166MapeWrap Primer 1 166MapeWrap S Fabric 166MapeWrap S Fiocco 167Monofinish 138Monolastic 203

N Nivoplan 18/138

Nivorapid 15 P Pianocem M 16

Pianodur R 16Planicrete 29/221Planigrout 300 SP 148Planipatch 16Planitop 100 139Planitop 110 139Planitop 200 139Planitop 207 139Planitop 210 140Planitop 217 140Planitop 400 133Planitop 510 140Planitop 517 140Planitop 530 141

Planitop 540 141Planitop 560 141Planitop 580 141Planitop Fast 330 18/142Planitop G40 ME 133Planitop HDM 167Planitop HDM Maxi 167Planitop HDM Restauro 167Planitop Smooth & Repair 133Planopur 16Plastimul 198Plastimul 1K Super Plus 199Plastimul 2K Plus 199Plastimul 2K Reactive 199Plastimul 2K Super 199Plastimul Primer 200Porocol 124Porocol FF 124PoroMap Finitura 116PoroMap Intonaco 114PoroMap Intonaco Macchina 114PoroMap Rinzaffo 115PoroMap Rinzaffo Macchina 115Primer 3296 29/112Primer BI 29/204Primer EP 29/62Primer ER Rustop 30/99Primer FD 62Primer G 30Primer G Conductive 30/84Primer KL 30Primer M 31/63Primer MF 31Primer MF EC Plus 31Primer P 31/63Primer for Aquaflex 178/200Primer PU60 32/63Primer S 32Primer SN 32/100Prosfas 32Pulicol 2000 84Purtop 400 M 204Purtop 600 204Purtop 1000 204Purtop Primer Black 205

Q Quartz 0.25 103

Quartz 0.5 103Quartz 1.2 33/104Quartz 1.9 104Quarzolite Base Coat 186Quarzolite Graffiato 187Quarzolite Paint 187Quarzolite Tonachino 187Quarzolite Tonachino Plus 187

R Re-Con Zerø 221

Resfoam 1 KM 200Rete 320 104

S Silancolor AC Paint 188

Silancolor AC Tonachino 188Silancolor Base Coat 188Silancolor Cleaner Plus 188Silancolor Graffiato 189Silancolor Paint 189Silancolor Paint Plus 189Silancolor Primer 189Silancolor Primer Plus 190Silancolor Tonachino 190Silancolor Tonachino Plus 190Silexcolor Base Coat 190Silexcolor Graffiato 191Silexcolor Marmorino 191Silexcolor Paint 191Silexcolor Primer 191Silexcolor Tonachino 192Silwood 67Silwood Decking 67Stabilcem 134

T Thinner for adhesives 33

Thinner PU 33Topcem 14Topcem Pronto 14Triblock Finish 142Triblock P 33

U Ultrabond Eco 185 74

Ultrabond Eco 375 74

Ultrabond Eco 380 75Ultrabond Eco 520 75Ultrabond Eco 571 2K 77Ultrabond Eco 575 66Ultrabond Eco Fix 75Ultrabond Eco S955 1K 66Ultrabond Eco Tack 75Ultrabond Eco V4 SP 76Ultrabond Eco V4 SP Conductive 76Ultrabond Eco V4 SP Fiber 76Ultrabond MS Rapid 61Ultrabond P-R9 85Ultrabond P902 2K 66Ultrabond P990 1K 67Ultrabond S965 1K 67Ultrabond Super Grip 61/76Ultrabond Turf 2 Stars 78Ultrabond Turf PU 1K 78Ultrabond Turf PU 2K 78Ultrabond Turf Tape 100 78Ultracoat Aqua Plus 68Ultracoat Binder 68Ultracoat Clean Polish 85Ultracoat Clean WPM 85Ultracoat Easy Plus 68Ultracoat EL 68Ultracoat High Traffic 69Ultracoat Oil 69Ultracoat Oil Care 69Ultracoat Pad 86Ultracoat Polish Remover 86Ultracoat Premium Base 69Ultracoat Roller Combi 86Ultracoat Roller Finish 86Ultracoat Roller Oil 87Ultracoat Roller Plus 87Ultracoat Roller Quick 87Ultracoat SR 87Ultracoat Steel Spatula 88Ultracoat Toning Base 70Ultracoat Universal Base 70Ultracoat Universal Cleaner 88Ultracolor Plus 47Ultralite S1 39Ultralite S2 40Ultramastic 2 40Ultramastic III 41Ultramastic 5 41Ultraplan 17Ultraplan Eco 17Ultraplan Eco 20 17Ultraplan Maxi 17Ultratop 100Ultratop Living 101Ultratop Stucco 101

V Vinavil 03V 178 W WallGard Graffiti Barrier 192

WallGard Graffiti Remover Gel 192

Mapei’s world is one of values based on the quality of construction work. In “Mapei

City / World”, interpreted and created by the renowned illustrator Carlo Stanga, each

one of the most prestigious references represented is a vivid reminder of one of the

15 Mapei product ranges.Mapei’s articulated, concrete contribution to

the world of construction as a leading player, each and every day, on the most varied

sites all around the globe, corresponds to the freedom of expression and fantasy in

each design. Mapei is always by your side, wherever you are, to make your construction

dreams become a concrete reality.

PRODUCTS FOR THE REPAIR OF MASONRY

PRODUCTS FOR CEMENTITIOUS AND RESIN FLOORING

PRODUCTS FOR STRUCTURAL STRENGTHENING

PRODUCTS FOR RESILIENT AND TEXTILE MATERIALS

PRODUCTS FOR BUILDING

PRODUCTS FOR CERAMICS AND STONES

ADMIXTURES FOR CONCRETE

GRINDING AIDS FOR CEMENTS

PRODUCTS FOR WOODEN FLOORING

PRODUCTS FOR ACOUSTIC INSULATION

ELASTIC SEALANTS AND ADHESIVES

PRODUCTS FOR THERMAL INSULATION

WALL PROTECTIVE AND DECORATIVE COATINGS

PRODUCTS FOR WATERPROOFINGPRODUCTS FOR

UNDERGROUND CONSTRUCTIONS


“Mapei City, Mapei World”

No need for greenwashing

( )To develop eco-sustainable products, you cannot wash them green. You have to invest in research and have your products certified by internationally recognized institutions.Mapei’s long-lasting commitment to the environment results in plenty of products which have been awarded international certifications and contribute to achieving eco-sustainable buildings.

Mapei’s technologically-advanced products, certified according to the most strict and demanding international standards, have always played a major part in the design and creation of large building projects, representing Italian excellence all around the world. Safe products for the environment, workers and end users.

Certification-proof


From Mapei, safe products for the environment, workers and end users:

Trust on Mapei for your eco-sustainable project.

• based on the innovative R&D labs of Mapei Group• formulated with recycled, ultra-light raw materials• developed to reduce energy consumption• manufactured locally by eco-sustainable plants• very low VOC content• certified according to the most strict and demanding standards

certification-proof


DESIGN GUIDE

ARCHITECTURALSOLUTIONS

www.mapei.itREGISTER TO ENTER

AN INTERACTIVE MANUAL DEDICATED TO DESIGNERS AND PROFESSIONALS TO CONSULT OVER THE WEB. FOLLOW THE SIMPLE PROCEDURES AND DOWNLOAD TECHNICAL SPECIFICATIONS AND DRAWING ATTACHMENTS TO CARRY OUT LARGE AND SMALL LEED-CERTIFIED PROJECTS IN COMPLIANCE WITH CURRENT STANDARDS.

CERTIFIED QUALITY AND COMMITMENT TO THE ENVIRONMENT...beyond apparent sustainability


MAPEI APPLIES QUALITY, ENVIRONMENTAL, HEALTH AND SAFETY MANAGEMENT SYSTEMS CERTIFIED ACCORDING TO INTERNATIONAL STANDARDS ISO 9001, ISO 14001 AND OHSAS 18001

No. 250CERTIQUALITY

Since 1994, MAPEI SpA has applied a Quality System certified by Certiquality in compliance with ISO 9001 standards. The number of MAPEI group subsidiaries which boasts this certification is increasing each year.

Mapei SpA’s Italian-based facilities apply an Environmental Management System certified by Certiquality in compliance with ISO 14001 standards.As with the quality system, this certification is being applied in an increasing number of the group’s facilities.

Both Italian-based production facilities have successfully completed OHSAS 18001 certification for their Occupational Health and Safety Management System.

Both Mapei SpA’s facilities have been awarded a Certificate of Excellence, issued by Certiquality to those facilities which have certified quality, environmental and health and safety management systems.

The group’s main production facility also adopts EMAS III (Environmental Management and Audit Scheme), the European Union’s environmental management system certified according to the European Regulation EC 1221/2009.

MAPEI LAYING PRODUCTS AND SYSTEMS COMPLY WITH THE REQUIREMENTS OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION (CPR 305/2011, formerly CPD)Adhesives for ceramic and stone tiles, renders, screed materials, masonry mortars, products for restoring and protecting concrete, admixtures for concrete, fixing systems, thermal insulation systems, etc. comply with European Standards and carry the CE mark, as required by the CPR. Special logos are used in catalogues and on technical data sheets to indicate a product which meets the requirements and its relative reference standard, for example:

EN 998-1 EN 12004 EN 13813

EN 1504 EN 934

Other logos indicate the characteristics of the product according to the designation of the relative European Standards

IN C

OMPL

IA

NCE WITH EUROPEAN STANDARDS

ADHESIVES FOR CERAMIC TILE

S

IN COMPLIANCE WITHEUROPEAN STANDARD

EN 15824EXTERNAL AND INTERNAL PLASTERS

BASED ON ORGANIC BINDERS


SURFACE PROTECTIONSYSTEMS FOR CONCRETE

EN 1504-2 (C)

MC-IRPRINCIPLES


REPAIR MORTAR

R2EN 1504-3

RENDERING AND

PLASTERING MORTAR


GP-CS IIIEN 998-1

MASONRY MORTAR


EN 998-2

T-M5

LAYING SYSTEMS FOR RESILIENT, TEXTILE, WOOD AND CERAMIC FLOORING AND COATINGS ARE CERTIFIED IN COMPLIANCE WITH THE “INDOOR AIR QUALITY” REQUIREMENTS OF INTERNATIONALLY-RECOGNISED INSTITUTES AND LABORATORIES

®EMICODEGEV

Since 2005 these products, tested and certified by internationally-qualified institutes, have earned the right to carry the “EC1” (very low emission level of volatile organic compounds) mark, and the “EMICODE EC1 PLUS” (very low emission level of volatile organic compounds-PLUS) mark. Both marks are awarded by the GEV Institute (Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V.), an association which checks emission levels of products used for floors, adhesives and various materials used in the building industry, and of which MAPEI is a member.

The certification of these products was recently widened to include “Der Blaue Engel”, a German ecology label which identifies products which respect the environment, floor layers and end users.

And finally, the “Green Label Plus” mark issued by the Carpet and Rug Institute, proves that a product has been tested and certified by an independent laboratory, a further guarantee for clients that they are purchasing a material which complies with the most severe requirements regarding low emissions.

Certification of Mapei’s Quality, Environmental, Health and Safety Management systems are issued by accredited standards bodies recognised at an international level

MAPEI CONCRETELY PROMOTES SUSTAINABILITY BY JOINING INTERNATIONAL PROGRAMMES AND ORGANISATIONS…LEED - Leadership in Energy and Environmental DesignCertification developed by the US Green Building Council for the design and construction of eco-compatible constructions.

Responsible Care Programme

Mapei SpA has been part of the chemical industry’s world-wide Responsible Care programme since 1992, and communicates data which is published in the annual Responsible Care report.

…AND DEVELOPING TECHNOLOGICALLY-ADVANCED PRODUCTS AND SOLUTIONS WHICH CONTRIBUTE TO SAFEGUARDING THE ENVIRONMENT AND OUR HEALTH…

Our commitment to the environmentMapei products help designers and contractors create innovative projects certified LEED “The Leadership in Energy and Environmental Design”, in compliance with the Green Building Council.

Low DustMapei’s Low Dust technology allows dust emissions during the mixing, working and application phases of powdered products to be reduced by 90%, with advantages for the environment and the health of floor layers.

BioBlockThis Mapel technology impedes the formation and proliferation of various types of mould in damp conditions. Drop

Effect

DropEffectMapei technology based on the use of special hydrophobising additives, allows surfaces to be highly water repellent, less prone to attract dirt and have excellent durability.

The quality of air inside buildingsA label applied on construction products for internal applications sold in France from the 1st of January 2012 (and from 1/9/2013 for products on the market since before this date). It is similar to the energy efficiency label applied on household appliances, and indicates the class of the product (A+ is the highest and C is the lowest) regarding the emission of volatile organic compounds (VOC).Ref. French Decree n° 2011-321 and successive issues.

A+ A B C

ÉMISSIONS DANS L’AIR INTÉRIEUR*

A+* INFORMATION SUR LE NIVEAU D’EMISSION DE SUBSTANCES VOLATILES DANS L’AIR INTERIEUR,

PRESENTANT UN RISQUE DE TOXICITE PAR INHALATION, SUR UNE ECHELLE DE CLASSE ALLANT DE A+ (TRES FAIBLES EMISSIONS) A C (FORTES EMISSIONS)

* Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions)

A+ A B C

ÉMISSIONS DANS L’AIR INTÉRIEUR*

A+

SCREEDS AND SMOOTHING COMPOUNDS

14

1. SCREEDS AND SMOOTHING COMPOUNDS

MapecemSpecial quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds.

TECHNICAL DATA:Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0 to 8 mm) and with 80-160 kg of water according to the moisture content of the inerts.Workability time: 20-30 minutes.Set to light foot traffic: after 2-3 hours.Waiting time before laying: – 3 hours for ceramic tiles and stone material;– 24 hours for resilient and wood coverings.Residual humidity after 24 hours: less than 2%.Storage: 12 months.Application: tapping and flattening with a straight edge.Consumption: 3.5-4.5 kg/m² per cm of thickness.Packaging: 20 kg bags.

TECHNICAL DATA:Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water.Workability time: 20-30 minutes.Set to light foot traffic: after 2-3 hours.Waiting time before laying: – 3 hours for ceramic tiles and stone material;– 24 hours for resilient and wood coverings.Residual humidity after 24 h.: less than 2%.Storage: 12 months.Application: tapping and flattening with a straight edge.Consumption: 20 kg/m² per cm of thickness.Packaging: 25 kg bags.

Mapecem ProntoPre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds.

TECHNICAL DATA:Recommended mixing ratio: 200-250 kg of TOPCEM with 1 m3 of aggregate (diameter from 0-6 mm) and 110-130 kg of water for dry graded aggregate.Workability time: 60 minutes.Set to light foot traffic: after 12 hours.Waiting time before laying: 24 hours for ceramic tiles, 2 days for stone material, 4 days for resilient and 7 days for wood coverings.Residual humidity after 4 days: less than 2%.Storage: 12 months in original packaging in a dry place.Application: mixer and straight edge.Consumption: 2-2.5 kg/m² per cm of thickness.Packaging: 20 kg bags.

TopcemSpecial prebagged, polymer modified hydraulic binder for normal setting, fast drying (4 days) and controlled shrinkage screeds.

TECHNICAL DATA:Mixing ratio: 1 bag of 25 kg of TOPCEM PRONTO with 1.7 litres of water.Workability time: 40-60 minutes.Set to light foot traffic: after 12 hours.Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in original packaging in a dry place.Application: poured, compacted and floated.Consumption: 18-20 kg/m² per cm of thickness.Packaging: 25 kg bags.

Topcem ProntoPreblended, ready to use mortar with normal setting and controlled shrinkage for fast-drying screeds (4 days).

1.1 Screeds ____________________________________________________________________________________

EN 13813

15

TECHNICAL DATA:Dosage: from 1 to 7 kg per cubic metre of mix.Packaging: 6 kg polyethylene bags.

Mapefibre ST24/ST42Structural polymer fibres for cementitious concrete and screeds. May be used to completely or partially substitute conventional reinforcement. Available in lengths of 24 and 42 mm.

TECHNICAL DATA:Dosage: 0.25 to 1 litre per 100 kg of total cementitious material.Packaging: 25 kg jerrycans, 200 litre drums and 1000 litre mega drums.

Dynamon SC950High performance proprietary screed additive.

TECHNICAL DATA:Where to use: internal ceramic, natural stone, resilient and wooden floors.Workability time: 20-30 minutes.Thickness applied: from 3 to 10 mm.Set to light foot traffic: approx. 3 hours.Waiting time before laying: 12 hours for ceramic tiles, natural stone, parquet and resilient coverings.Colour: pinky grey.Application: trowel or rake.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Consumption: 1.5 kg/m² per mm of thickness.Packaging: 25 kg bags.

FiberplanSelf-levelling, fibre-reinforced, quick-hardening smoothing compounds for thicknesses of from 3 to 10 mm.Particularly recommended for wood.

TECHNICAL DATA:Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coatings.Workability time: 15 minutes.Thickness applied: from 1 to 20 mm.Set to light foot traffic: approx. 2 hours.Waiting time before laying: 4-6 hours for ceramic tiiles and natural stone, 12 hours for parquet and resilient coverings.Colour: grey.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: metal trowel.Consumption: 1.6 kg/m² per mm of thickness.Packaging: 25 kg bags.

NivorapidQuick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces.

1.2 Sand and cement screeds _____________________________________________________________________

NEW

NEW

1.3 Smoothing compounds _______________________________________________________________________

C25-F7LEVELLING

COMPOUNDS

A2 -s1fl

CT

EN 13813

LEVELLINGCOMPOUNDS

C40-F10A2 -s1fl

EN 13813

16


TECHNICAL DATA:Workability time: 20-25 minutes.Application temperature range: from +10°C to +30°C. Set to light foot traffic: after approximately 12 hours.Waiting time before laying: approx. 15 hours.Colours: Comp. A: beige, comp. B: brown.Application: rake or smooth metal trowel.Storage: 24 months.Consumption: approx. 1.5 kg/m² per mm of thickness.Packaging: 14 kg units.

PlanopurTwo-component, self-levelling, flexible, polyurethane levelling compound for all types of substrate, especially the deformable type.

TECHNICAL DATA:Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coatings.Workability time: approx. 10 minutes.Thickness applied: from 0 to 10 mm.Set to light foot traffic: approx. 2 hours.Waiting time before laying: 4-6 hours for ceramic tiles and natural stone, 12 hours for resilient coverings.EMICODE: EC1 Plus - very low emission.Colour: grey.Storage: 12 months.Application: trowel.Consumption: 1.5 kg/m² per mm of thickness.Packaging: 25 kg bags.

PlanipatchFine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces.

2C25-F7

LEVELLINGCOMPOUNDS

C35-F71

CEMENTITIOUSSCREED

EN 13813

EN 13813

TECHNICAL DATA:Where to use: internal floors and walls for resilient coatings.Workability time: 4 hours.Thickness applied: from 1 to 5 mm.Set to light foot traffic: from 4 to 24 hours according to the surrounding temperature.Waiting time before laying: 3 days for resilient coverings.Colour: grey.Storage: 12 months.Application: trowel.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 25 kg bags.

Pianocem MThixotropic cementitious smoothing compound for thicknesses from 1 to 15 mm, including on vertical surfaces.

TECHNICAL DATA:Where to use: internal floors for resilient coatings.Workability time: 20÷30 minutes.Thickness applied: up to 3 mm.Set to light foot traffic: 3 hours.Waiting time before laying: 12 hours for resilient coverings.Colour: grey.Storage: 12 months.Application: trowel or rake.Consumption: 1.5 kg/m² per mm of thickness.Packaging: 25 kg bags.

Pianodur RFine-grained, ultra quick-setting self-levelling smoothing compound for thicknesses up to 3 mm, for floors subject to intense traffic.

17

TECHNICAL DATA:Where to use: internal floors for concrete pavements, terrazzo, ceramic, natural stone and magnesite floors.Workability time: 20-30 minutes.Thickness applied: from 1 to 10 mm.Set to light foot traffic: 3-4 hours.Waiting time before laying: 12 hours for ceramic tiles and natural stone, 24 hours for resilient flooring and carpet.Application: trowel,squeegee or pump.EMICODE: EC1 R - very low emission.Colour: grey.Storage: 12 months in a dry place in original unopened packaging.Consumption: 1.6 kg/m² per mm of thickness.Packaging: 23 kg bags.

Ultraplan Eco 20Rapid hydrating, fast-drying self-levelling compound.

TECHNICAL DATA:Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.Workability time: 20-30 minutes.Thickness applied: from 1 to 10 mm.Set to light foot traffic: approx. 3 hours.Waiting time before laying: 12 hours for ceramic tiles, natural stone and resilient coverings, 24 hours for wood.Application: trowel, rake or pump.EMICODE: EC1 R Plus - very low emission.Colour: pinky grey.Storage: 12 months.Consumption: 1.6 kg/m² per mm of thickness.Packaging: 23 kg bags.

Ultraplan EcoSelf-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC).

TECHNICAL DATA:Where to use: internal floors for ceramic, natural stone, resilient and wood floor coverings.Workability time: 20-30 minutes.Thickness applied: from 1 to 10 mm.Set to light foot traffic: approx. 3 hours.Waiting time before laying: 12 hours for ceramic tiles, natural stone, resilient and wood coverings.Application: trowel, spiked roller or pump.EMICODE: EC1 R Plus - very low emission.Colour: grey.Storage: 12 months in a dry place in original unopened packaging.Consumption: 1.6 kg/m² per mm of thickness.Packaging: 23 kg bags.

UltraplanUltra-fast drying self-levelling compound for thickness from 1 to10 mm.

C25-F7LEVELLING

COMPOUNDS

A2 -s1fl

CT

EN 13813

TECHNICAL DATA:Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.Workability time: 30-40 minutes.Thickness applied: from 3 to 30 mm.Set to light foot traffic: approx. 3 hours.Waiting time before laying: from 12 to 24 hours for ceramic tiles and natural stone, from 24 to 72 hours for resilient and wood coverings (according to thickness).Application: trowel or pump.EMICODE: EC1 R Plus - very low emission.Colour: grey.Storage: 12 months.Consumption: 1.7 kg/m² per mm of thickness.Packaging: 25 kg bags.

Ultraplan MaxiSelf-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 30 mm.

C25-F7LEVELLING

COMPOUNDS

A2 -s1fl

CT

EN 13813

C20-F5

C35-F7LEVELLING

COMPOUNDS

A2 -s1fl

18


TECHNICAL DATA:Where to use: internal walls and floors for ceramic and natural stone coatings.Workability time: approximately 20 minutes.Thickness applied: from 3 to 30 mm.Waiting time before laying ceramic and natural stone: 4 hours, varies according to the surrounding temperature.Application: smooth trowel.Colour: grey.Storage: 12 months.Consumption: 1.45 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop Fast 330Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

RENDERING AND PLASTERING MORTAR

IN COMPLIANCE WITHEUROPEAN STANDARD•••

GP-CS IVEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

TECHNICAL DATA:Where to use: on floors for ceramic and natural stone coatings.Workability time: more than 60 minutes.Thickness applied: from 3 to 20 mm.Set to light foot traffic: approx. 4 hours.Application: N° 6 or 10 rounded notched trowel.EMICODE: EC1 R Plus - very low emission.Colour: grey.Storage: 12 months.Consumption: 4-10 kg/m².Packaging: 25 kg bags.

Adesilex P4Quick-hardening cementitious levelling compound for internal and external surfaces.

1.4 Products for levelling substrates _______________________________________________________________

TECHNICAL DATA:Where to use: on walls for ceramic and natural stone coatings.Workability time: 2-3 hours.Thickness applied: from 2 to 30 mm.Waiting time before laying ceramic and natural stone: 4 hours, according to thickness.Application: trowel.Colours: grey and white.Storage: 12 months.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 25 kg bags.

NivoplanSmoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 30 mm.

EN 12004

IN C

OMPL

IANCE WITH EUROPEAN STANDARDS CEM

ENTITIOUS ADHESIVE FOR CERAMIC T

ILES

EN 12004

PRODUCTS FOR SOUNDPROOFING

22

2. PRODUCTS FOR SOUNDPROOFING

TECHNICAL DATA:Thickness: 3 mm.Width: 100 mm.Length: 25 m.Packaging: boxes containing 12 rolls 25 m long.

Mapesilent TapeAdhesive sealing tape made in closed-cell expanded polyethylene.

TECHNICAL DATA:Tensile strength:– longitudinal: 700 N/50 mm.– transversal: 500 N/50 mm.Impact strength: 900 mm.Resistance to static perforation: 15 kg.Impermeability to water: > 100 KPa.Reaction to fire: F.Apparent dynamic stiffness (S’t): 15 MN/m³.Dynamic stiffness for calculation purposes (S’): 47 MN/m³.Reduction of noise from footsteps when installed (∆Lw): 42 dB.Reduction of noise caused by footsteps under laboratory conditions (∆Lw(*)): 24 dB.Thermal resistance (R): 0.145 m²K/W.Nominal Thickness: 8 mm.Format: 10 x 1 m rolls with a 5 cm border along the sides.Weight: 1.8 kg/m².Packaging: pallets containing 160 m².

(*) Measured in an independent laboratory on a 14 cm thick normalised reinforced concrete floor with a surface area of 10 m² and an upper acoustic chamber (according to UNI EN ISO 140-8).

Mapesilent RollSheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene fabric with a 5 cm wide self-adhesive border along the sides.

TECHNICAL DATA:Tensile strength:– longitudinal: 700 N/50 mm;– transversal: 500 N/50 mm.Impact strength: 900 mm.Resistance to static perforation: 15 kg.Impermeability to water: > 100 KPa.Reaction to fire: F.Apparent dynamic stiffness (S’t): 10 MN/m³.Reduction of noise from footsteps when installed (∆Lw): 42 dB.Reduction of noise caused by footsteps under laboratory conditions (∆Lw(*)): 24 dB.Thermal resistance (R): 0.313 m²K/W.Nominal thickness: 13 mm.Format: 1000 mm x 1000 mm tiles.Weight: 5 kg/m².Packaging: pallets containing 75 m².

(*) Measured in an independent laboratory on a 14 cm thick normalised reinforced concrete floor with a surface area of 10 m² and an upper acoustic chamber (according to UNI EN ISO 140-8).

Mapesilent PanelTiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre.

TECHNICAL DATA:Thickness: 5 mm.Width at base: 50 mm.Height: 100 mm / 160 mm.Length: 50 m.Packaging: cellophane package with 4 rolls 50 m long.

Mapesilent Band RClosed-cell, expanded polyethylene adhesive strip applied to perimeter walls and around the edges of elements which pass through screeds to avoid the formation of acoustic bridges.

23

TECHNICAL DATA:Thickness: 3 mm.Width: 5 cm.Length: 11 m.Packaging: boxes of 11 m 4 rolls.

Mapesonic StripSelf-adhesive perimeter strip positioned around the edge of flooring and any pillars passing through the flooring to prevent the formation of acoustic bridges, specific for use with MAPESONIC CR.

TECHNICAL DATA:Thickness: 2 mm and 4 mm.Format:– 30 x 1 m (2mm thick) sheets.– 20 x 1 m (4 mm thick) sheets.Density (kg/m³): 700.Colours: brown-black.Tensile strength EN ISO 1798 (N/mm²): 0.6.Elongation at failure EN ISO 1798 (%): 20.Reduction of noise from footsteps EN ISO 140-8: 10 dB.Certified: Technical Report N. PX21361-1.

Mapesonic CRSoundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors.

TECHNICAL DATA:Thickness: 2.5 mm.Width: 14 cm and 33 cm.Length: 10 m.Packaging:pallets containing 161 x 14 cm wide rolls.pallets containing 69 x 33 cm wide rolls.

Mapesilent UnderwallElasto-plastomeric soundproofing strip made from bitumen and special polymers sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene fabric, positioned underneath perimeter walls and partitions.

NEW

NEW

PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS

26

3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS

TECHNICAL DATA:Consistency: liquid.Colour: brown.Set to light foot traffic: 30-40 minutes.Waiting time before laying parquet using reactive adhesives: min. 2 hours, max. 24 hours.Waiting time before laying parquet or smoothing layer on surfaces sprinkled with quartz: 12-24 hours.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: roller or brush.Consumption: 0.2-0.4 kg/m² per coat.Packaging: 10 kg drums.

Eco Prim PU 1K TurboOne-component, solvent-free, moisture curing, rapid-drying polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.

TECHNICAL DATA:Consistency: liquid. Colour: brown.Set to light foot traffic: after 9-10 hours.Waiting time before laying parquet using reactive adhesives: min. 24 hours, max. 3 days.Waiting time before laying parquet or smoothing layer on surfaces sprinkled with quartz: 36 hours.EMICODE: EC1 R - very low emission.Storage: 12 months.Application: roller or brush.Consumption: 0.2-0.4 kg/m².Packaging: 10 kg drums.

Eco Prim PU 1KOne-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.

TECHNICAL DATA:Consistency: creamy liquid.Colour: grey.Waiting time before applying render: 15-20 minutes.Waiting time before applying smoothing compounds: 30 minutes.EMICODE: EC1 Plus - very low emission.Storage: 12 months.Application: roller or brush.Consumption: 0.20-0.30 kg/m².Packaging: 10 kg and 5 kg drums.

Eco Prim GripReady-to-use bonding promoter and primer made from synthetic acrylic resin and silica inerts with a very low emission level of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles.

TECHNICAL DATA:Consistency: comp. A: thick liquid; comp. B: liquid.Colours: comp. A: straw yellow; comp. B: amber.Mixing ratio: comp. A : comp. B = 1 : 1.Workability time: 30-40 minutes.Storage: 24 months.Application: brush, roller or spray.Consumption: 0.10-0.15 kg/m².Packaging: 2.5 kg + 2.5 kg drums.

BiblockTwo-component, epoxy curing product in water dispersion for concrete with consolidating and anti-dust properties.

27

TECHNICAL DATA:Consistency: comp. A: fluid paste;comp. B: fluid paste.Colours: comp. A: grey; comp. B: white.Mixing ratio: comp. A : comp. B = 3 : 1.Setting time: 24 hours.Workability time: 60 minutes.Open time: 5 hours.Storage: 24 months.Application: brush, trowel or by pouring.Consumption: 1.35 kg/dm³.Packaging: 2 kg and 10 kg kits.

EporipTwo-component epoxy adhesive for monolithic sealing cracked screeds.

TECHNICAL DATA:Consistency: fluid liquid.Colour: white.Dilution rate: as is on non-absorbent surfaces, 1 : 1 or 1 : 2 on absorbent surfaces.Waiting time before applying smoothing compounds: 1-5 hours according to the surrounding conditions and the absorption of the substrate.EMICODE: EC1 Plus - very low emission.Storage: 12 months.Application: roller or brush.Consumption: 0.10-0.20 kg/m².Packaging: 5 and 20 kg drums.

Eco Prim TSolvent-free acrylic primer with a very low emission level of volatile organic compounds (VOC) for absorbent and non-absorbent substrates.

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

TECHNICAL DATA:Consistency: thick liquid.Colour: white.Dilution rate: with water at a ratio of 1 : 4 - 1: 5 for priming.Storage: 12 months. Protect from frost.Consumption: according to dilution rate.Packaging: 5, 10 and 25 kg drums.

LivigumAdmixture for cementitious mortar and smoothing compounds.

TECHNICAL DATA:Consistency: comp. A: fluid paste; comp. B: fluid paste.Colours: comp. A: grey; comp. B: white.Mixing ratio: comp. A : comp. B = 500 : 8.Setting time: 20-30 minutes.Workability time: 7 minutes.Storage: 12 months.Application: pouring.Consumption: 1.7 kg per dm³ of filled cracks.Packaging: 508 g metal cans (component A: 500 g; component B: 8 g).

Eporip TurboTwo-component, quick-hardening polyester resin for monolithic sealing cracked screeds.

28


TECHNICAL DATA:Consistency: comp. A: liquid; comp. B: liquid.Colours: comp. A: blue; comp. B: white.Mixing ratio: comp. A : comp. B = 1 : 1.Workability time: approximately 1 hour.Waiting time before applying smoothing compound: from 1 to 3 hours.Maximum waiting time before applying smoothing compound: 24 hours.Application: brush, roller or smooth trowel.Storage: 24 months. Protect from frost.Consumption: 0.1-0.2 kg/m².Packaging: 4+4 kg drums;2+2 kg drums.

Mapeprim SPTwo-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces.

TECHNICAL DATA:Consistency of mix: fluid.Colour of mix: opaline.Mixing ratio: comp. A: comp. B = 2.3 : 3.6.Workability time: 2-3 hours.Dust dry at +23°C and 50% R.H.: 3-4 hours (first coat); 6-8 hours (second coat).Final hardening time: 7 days.Application temperature range: from +8°C to +35°C.Storage: 24 months in its original sealed packaging.Application: roller, spray or airless spray.Consumption: 300-500 g/m² according to the absorption.Packaging: 5.9 kg kits (A + B).

Mapecoat I 600 WTwo-component transparent epoxy primer in water dispersion.

TECHNICAL DATA:Consistency of mix: fluid.Colour of mix: opaline.Mixing ratio: comp. A: comp. B = 2.3 : 3.6.Workability time: 2-3 h.Dust dry at +23°C - 50% R.H.: – 3-4 h (first coat); – 6-8 h (second coat).Final hardening time: 7 days.Application temperature range: from +8°C to +35°C.Storage: 24 months in its original sealed packaging.Application: roller, spray or airless spray.Consumption: 300-500 g/m² according to absorption.Packaging: 5.9 kg kits (A + B).

Mapecoat I 600 W LucidoTwo-component, shiny, transparent epoxy primer in water dispersion.

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 15.Dilution rate: ready-to-use; 30-50% of water for surfaces with low absorbency.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption (kg/m²): 0.10-0.15.Packaging: 2 and 10 kg.

MalechWater-based acrylic undercoat and bonding promoter with a smooth finish.

29

TECHNICAL DATA:Consistency: liquid.Colour: opaline.Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate.Drying time: 1-5 days.Waiting time before laying with vinyl adhesive: when dry.Storage: 12 months.Application: brush, roller or watering can.Consumption: 0.1-0.5 kg/m².Packaging: 5 and 10 kg drums.

Primer 3296Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds.

TECHNICAL DATA:Consistency: liquid.Dry solids content: 40%.Storage: 24 months.Consumption:– for adhesive slurry: 100-150 g/m²;– to prepare screeds and render: 50-80 kg/m³.Packaging: 5, 10 and 25 kg canisters and 12x1 kg packages.

PlanicreteSynthetic latex rubber to improve adhesion and strength of cementitious mortars.

TECHNICAL DATA:Colour: transparent.Consistency: fluid liquid.Density according to EN ISO 2811-1 (g/cm³): 0.96.Dry solids content (%): 10.Storage: 24 months in its original sealed packaging.Application temperature range: from +5°C to +35°C.Ready for painting over: 2-4 hours.Drying time: 5-6 hours at +20°C.Consumption: 0.20 kg/m² per coat, depending on the type of the substrates.Packaging: 10 kg.

Primer BISynthetic resin primer in solvent, specific for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.

TECHNICAL DATA:Minimum waiting time: 24 hours according to the porosity of the substrate.Consistency: liquid.Colour: transparent.Mixing ratio: comp. A : comp. B = 1 : 1.Workability time: 4-5 hours.Storage: 24 months.Application: brush, roller or watering can.Consumption: 0.5-0.7 kg/m².Packaging: 5+5 kg drums.

Primer EPTwo-component epoxy primer in solvents for consolidating and waterproofing cementitious screeds and industrial floors.

30


TECHNICAL DATA:Consistency: liquid.Colour: pinky transparent.Dilution rate: PRIMER KL : PRIMER MF = 1: 6.Drying time: 5 minutes.Storage: 12 months.Application: cotton rag.Consumption: 0.3-0.4 kg/m².Packaging: boxes 0f 12x0.8 litre bottles and 8 kg metal drums.

Primer KLBonding promoter in solvent for two-component epoxy, epoxy-polyurethane and polyurethane adhesives and thinner for PRIMER MF.

TECHNICAL DATA:Consistency: liquid.Colour: black.Drying time: minimum 2 hours.Electrical resistance: 50,000 ohm.Storage: 24 months. Protect from frost.Application: brush.Consumption: 0.1-0.15 kg/m².Packaging: 10 kg drums.

Primer G ConductiveDark-coloured, solvent-free conductive synthetic resin primer in water dispersion.

TECHNICAL DATA:Consistency: liquid.Colour: blue.Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate.Drying time: 2 hours according to the dilution rate and the absorption of the substrate.Application: brush.EMICODE: EC1 - very low emission.Storage: 24 months. Protect from frost.Consumption: 0.1-0.2 kg/m² according to use.Packaging: 5, 10 and 25 kg drums and 12x1 kg boxes.

Primer GSynthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

TECHNICAL DATA:Mixing ratio: comp. A: comp B. = 100 : 30.Colour of mix: white.Consistency of mix: liquid.Dry substances content (%): 70.Density of mix (kg/m³): 1,100.Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm).Workability time: 15-20 minutes at +20°C.Surface temperature: at least +10°C.Pot life: 6 h at +20°C.Varnishing: after 6-8 h at +20°C.Dusty dry: after 2 h at +20°C.Final hardening time: 24 h.Storage: 6 months in its original sealed packaging.Application: by brush, roller or airless spray system.Consumption: 0.2 kg/m².Packaging: 5 kg kits (A + B).

Primer EP RustopTwo-component epoxy primer for metal surfaces.

31

TECHNICAL DATA:Consistency: liquid.Colour: transparent yellow.Mixing ratio: comp. A : comp. B = 3 : 1.Waiting time before laying floors or applying smoothing compound: 24-48 hours according to the surrounding temperature.Workability time: 90 minutes.Storage: 24 months.Application: brush.Consumption: 0.20-0.30 kg/m².Packaging: 1 kg (Comp. A 0.750 kg + Comp. B 0.250 kg) and 6 kg (Comp. A 4.5 kg + Comp. B 1.5 kg) boxes.

Primer MFTwo-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as anti-dust impregnator on concrete floors.

TECHNICAL DATA:Consistency: liquid.Colour: transparent.Inflammable: no.Application temperature: from +5°C to +35°C.Drying time: 40 minutes.Storage: 12 months.Application: brush.Consumption: 1.5-2 g/m (for a 1 cm deep joint).Packaging: 250 g bottles.

Primer MOne-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces.

TECHNICAL DATA:Consistency: liquid.Colour: transparent yellow.Mixing ratio: comp. A : comp. B = 4 : 1.Waiting time before laying floors or applying smoothing compound: 24 hours.Workability time: 40 minutes.EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Application: roller, brush or flat trowel.Consumption: 0.2-0.3 kg/m² per coat.Packaging: 5 kg units (A + B).

Primer MF EC PlusTwo-component, solvent-free, low-viscosity, epoxy primer with a very low emission level of volatile organic compounds for consolidating and waterproofing cementitious substrates.

TECHNICAL DATA:Application of sealant: after 20’.Colours: transparent.Application: brush.Consumption: 150 g/m² (10-50 g/metre of treated 1 cm-deep joint).Packaging: 150 g canisters.

Primer POne-component primer for sealants applied on plastics.

32


TECHNICAL DATA:Consistency: liquid.Colour: transparent.Drying time: according to the absorbency of the substrate.Storage: 24 months. Protect from frost.Application: brush, flat brush or rollerConsumption: 0.5-0.7 kg/m².Packaging: 25 kg tanks.

ProsfasWater-based, solvent-free consolidator with high penetration properties for cementitious substrates.

TECHNICAL DATA:Mixing ratio: component A : component B = 80 : 20.Colour of mix: neutral.Consistency of the mix: dense fluid.Density of mix (kg/m³): 1500.Viscosity of the mix (mPa·s): 1,200.Pot life: 30 min.Application temperature range: from +8°C to +35°C.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 12 hours.Final setting time: 7 days.Application: flat American trowel or smooth trowel.Consumption: 0.3-0.6 kg/m² per coat, depending on the absorbency and characteristics of the substrate.Packaging: 20 kg units:– component A = 16 kg;– component B = 4 kg.

Primer SNTwo-component epoxy primer with fillers.May be coloured with MAPECOLOR PASTE.

TECHNICAL DATA:Consistency: liquid.Colour: pink.Waiting time between each coat: 20-30 minutes.Waiting time before laying coating: approx. 12 hours.Application: brush or roller.Storage: 24 months. Protect from frost.Consumption: 0.1 kg/m² per coat.Packaging: 5 kg bottles.

Primer SWaterproofing primer in water dispersion.

TECHNICAL DATA:Consistency: liquid.Colour: brown.Dilution ratio: from 25 to 100% with THINNER PU.Set to light foot traffic: 3-8 hours according to dilution ratio.Hardening time: 24 hours.Waiting time before laying with reactive adhesive: 2-7 days.Storage: 12 months.Application: brush, roller or watering can.Consumption: 0.4-1.2 kg/m².Packaging: 10 kg drums.

Primer PU60Moisture curing polyurethane resin for consolidating and waterproofing damp screeds.

33

TECHNICAL DATA:Consistency: comp. A liquid; comp. B liquid; comp. C powder.Colours: comp. A white; comp. B white; comp. C white.Mixing ratio: comp. A : comp. B : comp. C = 12 : 38 : 50.Workability time: 30-40 minutes.Waiting time between first and second coat: 4-6 hours.Waiting time before laying floors or applying smoothing compound: 18 hours.Maximum waiting time before laying floors or applying smoothing compound: 7 days.Storage: 24 months.Application: brush or roller.Consumption: 0.5 kg/m².Packaging: 5 kg drums (A+B+C).

Triblock PThree-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates.

TECHNICAL DATA:Colours: grey - beige.Grain size: 0.7-1.2.Packaging: 25 kg bags.

Quartz 1.2Calibrated silica sand to improve the bond on resin or epoxy primers.

TECHNICAL DATA:Consistency: liquid.Colour: transparent.Inflammable: yes.Storage: 12 months.Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate considered.Packaging: 9 kg drums.

Thinner PUThinners for PRIMER PU60.

Thinner for adhesivesN.B. Packaging approved according to ADR as specified in Ministerial Decree 22/2/1990.

ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL

36

4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL

TECHNICAL DATA:Pot life of mix: approx. 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Colour: white.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-5 kg/m².Packaging: 25 kg bags.

Adesilex P10High performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic and marble mosaic.

TECHNICAL DATA:Pot life of mix: 60 minutes.Open time: approx. 20 minutes.Waiting time before grouting:– on walls: after 4 hours;– on floors: after 6 hours.Set to light foot traffic: after 6 hours.Ready for use: after 3 days.Colours: grey.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-4 kg/m².Packaging: 25 kg bags.

Adesilex P9 ExpressHigh performance, fast setting cementitious adhesive with no vertical slip for ceramic tiles and stone materials.

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: 30 minutes.Waiting time before grouting:– on walls: after 4-8 hours depending on absorbency;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Colours: grey and white.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-4 kg/m².Packaging: 25 kg bags.

Adesilex P9High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles.

TECHNICAL DATA:Where to use: floors only.Pot life of mix: more than 60 minutes.Open time 20 minutes.Waiting time before grouting: 4 hours.Set to light foot traffic: approx. 4 hours.Ready for use: approx. 24 hours.Colour: grey.Application: N° 6 or 10 notched rounded trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Consumption: 4-10 kg/m².Packaging: 25 kg bags.

Adesilex P4High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material (thickness of adhesive from 3 to 20 mm).N.B. May also be used for smoothing internal and external surfaces.

Conformity of Adesilex P4 is declared in ITT certificate n° 25070275/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and as declared in ITT certificate n° 1220.6/10/R03 NPU issued by the Istitute ITB Katowice (Poland)

4.1 Hydraulic binder based adhesives ______________________________________________________________

EN 12004

IN C

OMPL

IANCE WITH EUROPEAN STANDARDS CEM

ENTITIOUS ADHESIVE FOR CERAMIC T

ILES

EN 12004

IN CO

MPLIANCE WIT H INT ER NAT IONAL STANDARDS CEM

ENT IT IO US A D H E SIV E FO R CE R AMIC T

ILES

ISO 1 3 0 0 7

37

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: >20 minutes.Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Colours: grey and white.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-5 kg/m².Packaging: 25 kg paper bags.

Kerabond TCementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm).

TECHNICAL DATA:KERABOND T+ISOLASTIC:Pot life of mix: 8 hours.Open time: 20-30 minutes (ADESILEX P10 + ISOLASTIC diluted 1:1 with water - 30 minutes).Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 - 36 hours.Set to light foot traffic: after 24-36 hours.Ready for use: 14 days.Deformability according to EN 12004: S2 - highly deformable (ADESILEX P10 + ISOLASTIC diluted 1:1 with water - S1 deformable).Application: Medium sized notched trowel.Storage: 12 months in a dry place in original unopened packaging.Packaging: 25 kg drums.

IsolasticLatex additive to provide elasticity to cement based adhesives - KERABOND T and ADESILEX P10. When KERABOND T is mixed with ISOLASTIC, it forms high-performance (C2E/S2), highly deformable adhesives with extended open time. When ADESILEX P10 is mixed with ISOLASTIC (dilution rate 1:1 with water), it forms a high-performance, deformable adhesive with extended open time (C2E/S1).

TECHNICAL DATA:Pot life of mix: 60-75 minutes.Open time: ≥30 minutes.Waiting time before grouting: 3 hours.Set to light foot traffic: approx. 2-3 hours.Ready for use: approx. 24 hours (3 days for basins and swimming pools).Deformability according to EN 12004: S2 - highly deformable.Colours: grey and white.Application: N° 4, 5, 6 or 10 notched trowel.Storage: part A: 12 months; part B: 24 months. Protect from frost.Consumption: 3-8 kg/m².Packaging: ELASTORAPID white: 31.25 kg kitcomp. A: 25 kg / comp. B: 6.25 kg.ELASTORAPID grey: 31.25 kg kitcomp. A: 25 kg / comp. B: 6.25 kg.

ElastorapidTwo-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of adhesive up to 10 mm).

Conformity of Elastorapid is declared in ITT certificate n° 25070277/Gi (TUM) and 25080024/Gi (TUM) issued by the Technische Universität München laboratory (Germany).

EN 12004

IN

COMP

LIA

NCE WITH EUROPEAN STANDARDS CEMENTITIOUS ADHESIVE FOR CER

AMIC

TIL

ES

EN 12004

C2FTES2

IN CO


ENT IT IO US A D H E SI V E FO R C E R AMIC T

ILES

ISO 1 3 0 0 7

TECHNICAL DATA:Consistency: comp. A: powder; comp. B: thick liquid.Colours: comp. A: grey and white; comp. B: greenish white.Mixing ratio: GRANIRAPID white:

comp. A: 22.5 kg + comp. B: 5.5 kg. GRANIRAPID grey: comp. A: 25 kg; comp. + B: 5.5 kg.

Pot life of mix: 45 minutes.Application temperature range: from +5°C to +40°C.Open time: 20 minutes.Setting time: approx. 2 hours.Set to light foot traffic: after 3-4 hours.Ready for use: after approx. 24 hours (basins and swimming pools can be filled after 3 days).EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Application: N° 4, 5, 6 or 10 notched trowel.Consumption: 3-8 kg/m².Packaging: GRANIRAPID white: 28 kg kit

comp. A: 22.5 kg bag; comp. B: 5.5 kg bucket. GRANIRAPID grey: 30.5 kg kit comp. A: 25 kg bag; comp. B: 5.5 kg bucket.

GranirapidHigh performance, deforamable, fast setting two-component cementitious adhesive for ceramic tiles and stone material.

38


TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: 4-8 hours;– on floors: 24 hours.Set to light foot traffic: approx. 24 hours.Ready for use: approx. 14 days.Colours: white and grey.Application: N° 4, 5, 6 or 10 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Consumption: 2-5 kg/m².Packaging: 25 kg bags.

Keraflex EasyEasy-to-apply, high-performance cementitious adhesive with good back-buttering properties, for ceramic and stone tiles. Very low emission level of volatile organic compounds. Particularly suitable for laying large porcelain tiles on large spreads of flooring areas, applied at a thickness up to 10 mm.

Conformity of Keraflex Easy is declared in ITT certificates n° 25080254/Gi and n° 25080400/Gi (TUM) issued by the Technische Universität München laboratory (Germany).

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Colours: grey and white.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-4 kg/m².Packaging: 25 kg bags

KeraflexHigh performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Keracrete PowderReady to use mixture of sand and cement mixed with KERACRETE latex. This mixture forms a high-performance adhesive with no vertical slip and is suitable for ceramic tiles, glass mosaic and stone material (thickness of adhesive up to 5 mm).

Conformity of Keracrete + Keracrete Powder is declared in ITT certificate n° 25040276/Gi (TUM) and 25080247/Gi (TUM) issued by the Technische Universität München laboratory (Germany).

TECHNICAL DATA:KERACRETE + KERACRETE POWDER:Pot life of mix: 90 minutes.Open time: 20 minutes.Waiting time before grouting:- on walls: 4-6 hours;- on floors: 24 hours.Set to light foot traffic: approx. 3 days.Ready for use: approx. 14 days (21 days for basins and swimming pools).Colours available: – KERACRETE POWDER: grey and white.Application: N° 5, 6 or 10 notched trowel.EMICODE: EC1 R Plus - very low emission.Mixing ratio: 4 kg with 1 kg of KERACRETE.Storage: – KERACRETE: 24 months. Protect from frost.– KERACRETE POWDER: 12 months.Consumption: – 0.5-1 kg/m² of KERACRETE;– 2-4 kg/m² of KERACRETE POWDER.Packaging: KERACRETE: 5, 10 and 25 kg drums;KERACRETE POWDER: 25 kg bags.

KeracreteSynthetic latex rubber mixed with KERACRETE POWDER (white or grey) or with sand and cement (thickness up to 5 mm).

EN 12004

IN C

OMPL

IANCE WITH EUROPEAN STANDARDS

CEMENTITIOUS ADHESIVE FOR CERAMIC

TIL

ES

EN 12004

EN 12004

IN C

OMPL



TIL

ES

EN 12004

IN CO



ILES

ISO 1 3 0 0 7

EN 12004

IN C

OMPL



TIL

ES

EN 12004

39

TECHNICAL DATA:Pot life of mix: 6-8 hours.Open time: >20 minutes.Waiting time before grouting:– on walls: after 4-8 hours depending on absorbency;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Colours: grey and white.Application: N° 4, 5 or 6 notched trowel.EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Consumption: 2-5 kg/m².Packaging: 20 kg bags.

KerasetCementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: 20 minutes.Waiting time before grouting:– on walls: 6-8 hours;– on floors: 24-36 hours.Set to light foot traffic: approx. 24-36 hours.Ready for use: approx. 14 days.Colours: grey and white.Application: N° 6 or 10 notched trowel or trowel for KERAFLOOR.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 25 kg bags.

KerafloorCementitious adhesive for ceramic tiles (thickness of adhesive up to 15 mm).

Conformity of Kerafloor is declared in ITT certificates n° 25050161/Gi and n° 25080270/Gi (TUM) issued by the Technische Universität München laboratory (Germany).

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Deformability according to ISO13007-1 and EN 12002: S1 - deformable.Colours: white and grey.Application: notched trowel.Storage: 12 months in a dry place in original unopened packaging.Consumption: - bond ceramic tiles: 1.2 kg/m² per mm of thickness.- bond panels: 4-7 kg/m²Packaging: 25 kg bags.

Keraflex Maxi S1High performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone (thickness of adhesive up to 15 mm).

IN CO



ILES

ISO 1 3 0 0 7

C2TE S1

EN 12004

IN C

OMPL



TIL

ES

EN 12004

IN CO



ILES

ISO 1 3 0 0 7

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: after 4-8 hours;– on floors: after 24 hours.Set to light foot traffic: 24 hours.Ready for use: 14 days.Deformability according to EN 12004: S1 - deformable.Colour: grey.Application: N° 5 or 6 notched trowel.Storage: 12 months in a dry place in original unopened packaging.Consumption: 0.8 kg/m² per mm of thickness.Packaging: 15 kg bags.

Ultralite S1Single-component, high-performance, flexible, lightweight, cementitious adhesive with no vertical slip, long open time, and extremely high yield. Suitable for the installation of ceramic tiles, stone and thin porcelain gres tiles.

IN CO



ILES

ISO 1 3 0 0 7

C2TE S1

Contains > 20% recycled content

40


TECHNICAL DATA:Open time: 20 minutes.Adjustment time: up to 30-35 minutes according to the absorption of the substrate, the tiles and the surrounding conditions.Waiting time before grouting: 12-24 hours.Set to light foot traffic: approx. 2 days.Ready for use: approx. 7 days.Deformability: highly deformable.Colour: white.Application: N° 4, 5 or 6 notched trowel.Storage: 24 months. Protect from frost.Consumption: 1.5-2.5 kg/m² on walls; 3-4 kg/m² on floors.Packaging: 12, 16 and 25 kg drums.

Ultramastic 2Ready-to-use, high performance adhesive paste with no vertical slip for laying ceramic tiles.

Conformity of Ultramastic 2 is declared in ITT certificate n° 25070251/Gi issued by the Technische Universität München laboratory (Germany).

TECHNICAL DATA:Open time: 20 minutes.Adjustment time: 30-35 minutes.Grouting: clean off adhesive which runs out of the joint with a damp brush within 20 minutes (depending on surrounding conditions).Colours: white, grey and beige.Application: notched trowel or brush.Storage: 24 months.Consumption: 1.4-4.2 kg/m².Packaging: 12 and 5 kg drums.

Fix & Grout BrickReady to use, high-performance adhesive paste with BioBlock® anti-mould technology for bonding brick slips and light weight cementitious and synthetic resin conglomerate decorative elements on internal and external surfaces.

Conformity of Fix & Grout Brick is declared in ITT certificate n° 25080309/Gi (TUM) issued by the Technische Universität München laboratory (Germany)

TECHNICAL DATA:Where to use: walls only.Open time: ≥ 30 minutes.Waiting time before grouting: 24 hours.Ready for use: 7-14 days.Deformability: highly deformable.Colour: white.Application: N° 4 or 5 notched trowel.Storage: 24 months. Protect from frost.Consumption: 1.5-2.5 kg/m².Packaging: 5, 12 and 25 kg drums and 1x12 packs.

Adesilex P22Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm).

Conformity of Adesilex P22 is declared in ITT certificate n° 25040268/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2009-B-4835/01 and 2009-B-4835/04 issued by the Istitute MPA Dresden (Germany).

TECHNICAL DATA:Pot life of mix: more than 8 hours.Open time: > 30 minutes.Waiting time before grouting:– on walls: 4-8 hours;– on floors: 24 hours.Set to light foot traffic: approx. 24 hours.Ready for use: approx. 14 days.Deformability according to EN 12004: S2 - highly deformable.Colour: grey and white.Application: n° 4, 5, 6 or 10 notched trowel.Storage: 12 months.Consumption: 0.8 kg/m² per mm of thickness, equivalent to 1.5-2.5 kg/m².Packaging: 15 kg sacks.

Ultralite S2One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and stone, ideal for thin porcelain tiles.

Conformity of Ultralite S2 is declared in ITT certificates n° 25110055/AG (TUM) and 25110056/AG (TUM) issued by the Technische Universität München laboratory (Germany).

EN 12004

IN C

OMPL

IANCE WITH EUROPEAN STANDARDS D

ISPERSION ADHESIVE FOR CERAMIC T

ILES

EN 12004

4.2 Synthetic resin-based adhesives _______________________________________________________________

EN 12004

Contains > 20% recycled content

IN C

OMPL



TIL

ES

EN 12004

C2E S2

EN 12004

IN C

OMPL



ILES

EN 12004

IN C

OMPL



ILES

EN 12004

EN 12004

41

TECHNICAL DATA:Open time: 50 minutes.Waiting time before grouting: 12 hours.Set to light foot traffic: approx. 12 hours.Ready for use: approx. 7 days.Deformability: highly deformable.Colours: grey and white.Application: N° 4 or 5 notched trowel.Storage: 24 months.Consumption: 2.5 -5 kg/m².Packaging: 5 and 10 kg units (A:B = 94:6 parts in weight).

Keralastic TTwo-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material.

Conformity of Keralastic T is declared in ITT certificates n° 2504321/Gi and n° 25040471 (TUM) issued by the Technische Universität München laboratory (Germany) and in 2008-B-2748/16.1, 2008-B-2748/17.1 and 2008-B-2748/18.1 certificates issued by the Istitute MPA Dresden (Germany).

TECHNICAL DATA:Open time: ≥ 30 minutes.Adjustment time: up to 50 minutes according to the absorption of the substrate, the tiles and the surrounding conditions.Waiting time before grouting: 12-24 hours.Set to light foot traffic: approx. 2 days.Ready for use: approx. 7 days.Deformability: highly deformable.Colour: white.Application: N° 4, 5 or 6 notched trowel.Storage: 24 months. Protect from frost.Consumption:– 1.5-2.5 kg/m² on walls;– 3-4 kg/m² on floors.Packaging: 5 and 16 kg drums.

TECHNICAL DATA:Open time: 50 minutes.Waiting time before grouting: 12 hours.Set to light foot traffic: approx. 12 hours.Ready for use: approx. 7 days.Deformability: highly deformable.Colours: grey and white.Application: N° 4 or 5 notched trowel.Storage: 24 months.Consumption: 2.5 -5 kg/m².Packaging: 5 and 10 kg units (A:B = 94:6 parts in weight).

Ultramastic 5Ready-to-use, high-performance adhesive paste with no vertical slip and long open and adjustment time for ceramic tiles. Ideal for absorbent substrates.

Conformity of Ultramastic 5 is declared in ITT certificate n° 25080235/Gi issued by the Technische Universität München laboratory (Germany).

KeralasticTwo-component, high-performance polyurethane adhesive for ceramic tiles and stone material.

Conformity of Keralastic is declared in ITT certificate n° 25040320/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in 2008-B-2748/13.1, 2008-B-2748/14.1 and 2008-B-2748/15.1 certificates issued by the Istitute MPA Dresden (Germany).

TECHNICAL DATA:Open time: ≥ 30 minutes.Adjustment time: up to 35-40 minutes according to the absorption of the substrate, the tiles and the surrounding conditions.Waiting time before grouting: 12-24 hours.Set to light foot traffic: approx. 2 days.Ready for use: approx. 7 days.Deformability: highly deformable.Colour: white.Application: N° 4, 5 or 6 notched trowel.Storage: 24 months. Protect from frost.Consumption:– 1.5-2.5 kg/m² on walls;– 3-4 kg/m² on floors.Packaging: 1, 5, 12 and 16 kg drums.

Ultramastic IIIReady-to-use, high-performance adhesive paste with no vertical slip and long open time, for laying ceramic tiles on walls and floors (thickness of adhesive up to 5 mm).

Conformity of Ultramastic III is declared in ITT certificate n° 25040266/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2009-B-4835/06 and 2009-B-4835/09 issued by the Istitute MPA Dresden (Germany).

EN 12004

IN C

OMPL



ILES

EN 12004

EN 12004

IN C

OMPL



ILES

EN 12004

EN 12004

IN C

OMPL


REACTION RESIN ADHESIVE FOR CERAMIC T

ILES

EN 12004

4.3 Reactive adhesives __________________________________________________________________________

EN 12004

IN C

OMPL



ILES

EN 12004

42


TECHNICAL DATA:Pot life of mix: 45 minutes.Open time: 30 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals.Colours: 26 different colours from the MAPEI “Coloured Grouts” range.Application: suitable trowel.EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Consumption:- for grouting: according to the size of the joints;- for bonding: 2-4 kg/m².Packaging: 5 and 10 kg units and 12x2 kg boxes.

KerapoxyTwo-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm).

Conformity of Kerapoxy is declared in ITT certificate n° 25040322/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2008-B-2748/7.1, 2008-B-2748/8.1 and 2008-B-2748/9.1 issued by the Istitute MPA Dresden (Germany)

TECHNICAL DATA:Pot life of mix: 45 minutes.Open time: 60 minutes.Set to light foot traffic: approx. 10-12 hours.Ready for use: 2 days.Colours: grey and white.Application: suitable notched trowel.Storage: 24 months.Consumption: 1.5 kg/m² per mm of thickness.Packaging: 10 kg units.

Kerapoxy AdhesiveTwo-component epoxy adhesive with no vertical slip for ceramic tiles and stone material.

Conformity of Kerapoxy Adhesive is declared in ITT certificate n° 25070399/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2008-B-2748/4.1, 2008-B-2748/5.1 and 2008-B-2748/6.1 issued by the Istitute MPA Dresden (Germany).

EN 12004

IN C

OMPL



ILES

EN 12004

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

EN 12004

IN C

OMPL



ILES

EN 12004

GROUTS FOR CERAMIC TILES

46

TECHNICAL DATA:Pot life of mix: approx. 2 hours.Waiting time before finishing: 10-20 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 7 days.Colour: white.Application: rubber MAPEI trowel or rake.Finishing: MAPEI sponge or Scotch-Brite® pad.EMICODE: EC1 R Plus - very low emission.Storage: 12 months (22 kg bags), 24 months (5 kg bags).Consumption: according to the size of the joints.Packaging: 22 kg bags and 4x5 kg boxes, according to the colour.

Keracolor SFFine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.

TECHNICAL DATA:Pot life of mix: approx. 2 hours.Waiting time before finishing: 10-20 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 7-10 days.Colours: 18 different colours from the MAPEI “Coloured Grouts” range.Application: rubber MAPEI trowel or rake.Finishing: MAPEI sponge or Scotch-Brite® pad.EMICODE: EC1 R Plus - very low emission.Storage: 12 months (22-25 kg bags), 24 months (5 kg bags).Consumption: according to the size of the joints.Packaging: 25 kg bags and 4x5 kg boxes, according to the colour.

Keracolor GGPre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.

TECHNICAL DATA:Pot life of mix: approx. 2 hours.Waiting time before finishing: 10-20 minutes.Set to light foot traffic: 24 hours.Ready for use: 7 days.Colours: 18 different colours from the MAPEI range.Application: MAPEI trowel or rubber float.Finishing: MAPEI sponge.EMICODE: EC1 R Plus - very low emission.Storage: 12 months (25 kg bags), 24 months (5 kg and 15 kg bags) in a dry place in original unopened packaging.Consumption: according to the size of the joints.Packaging: 15 kg, 25 kg bags and 4x5 kg boxes, according to the colour.

Keracolor FFHigh performance, polymer-modified, water-repellent, cement-based grout with DropEffect® technology for joints up to 6 mm.

TECHNICAL DATA:FUGOLASTIC + KERACOLOR:Pot life of mix: approx. 2 hours.Waiting time before finishing: 10-20 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 7-10 days.Application: rubber MAPEI trowel or rake.Finishing: MAPEI sponge or Scotch-Brite® pad.Storage of FUGOLASTIC: 24 months. Protect from frost.Consumption: according to the size of the joints.Packaging: 5, 10 and 25 kg drums and 12x1 kg packages.

FugolasticPolymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF.

5. GROUTS FOR CERAMIC TILES

5.1 Cementitious grouts __________________________________________________________________________

47

TECHNICAL DATA:Pot life of mix: 45 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: after 4 days surfaces may be exposed to chemicals.Colours: 21.Application: rubber MAPEI trowel.Finishing: MAPEI cellulose sponge.EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Consumption: according to the size of the joints.Packaging: 3 kg units. 10 kg units for colours:113 cement grey, 114 anthracite, 132 beige, 282 bardiglio grey, 283 sea blue, 290 cream.

Kerapoxy CQEasy-to-apply, two-component, anti-acid epoxy mortar with excellent cleanability properties for grouting joints at least 2 mm wide.

TECHNICAL DATA:Pot life of mix: 45 minutes.Open time: 30 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals.Colours: 26 different colours from the MAPEI “Coloured Grouts” range.Application: suitable trowel.EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Consumption:- for grouting: according to the size of the joints;- for bonding: 2-4 kg/m².Packaging: 5 and 10 kg units and 12x2 kg boxes.

KerapoxyTwo-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm).

Conformity of Kerapoxy is declared in ITT certificate n° 25040322/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2008-B-2748/7.1, 2008-B-2748/8.1 and 2008-B-2748/9.1 issued by the Istitute MPA Dresden (Germany)

TECHNICAL DATA:Pot life of mix: 20-25 minutes.Waiting time before finishing: 15-30 minutes.Set to light foot traffic: approx. 3 hours.Ready for use: 24 hours (48 hours for basins and swimming pools).Colours: 26 different colours from the MAPEI “Coloured Grouts” range.Application: rubber trowel.Finishing: MAPEI sponge or Scotch-Brite® pad.EMICODE: EC1 Plus - very low emission.Storage: – 12 months (23 kg bags);– 24 months (1 and 5 kg bags).Consumption: according to the size of the joints.Packaging: 23 kg bags and 4x5 kg and 9x1 kg boxes, according to the colour.

Ultracolor PlusHigh-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.

5.2 Epoxy grouts ________________________________________________________________________________

EN 12004

IN C

OMPL



ILES

EN 12004

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

TECHNICAL DATA:Pot life of mix: 45 minutes.Open time (adhesive): 30 minutes.Adjustment time (adhesive): 60 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: after 4 days surfaces may be exposed to chemicals.Colours: 15: 700 translucent (neutral), 702 silver grey, 710 ice white, 716 pink, 720 pearl grey, 728 dark grey, 729 sahara, 730 turquoise, 731 dark brown, 740 blue, 744 mandarin, 750 red, 760 gold, 770 anthracite and 799 white.Application: suitable trowel.Finishing: MAPEI cellulose sponge.EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Consumption: according to the size of the joints.Packaging: 3 kg units.

Kerapoxy DesignTwo-component, anti-acid, decorative, translucent epoxy mortar for grouting glass mosaic, ceramic tiles and stone material, used in combination with MAPEGLITTER for a particularly attractive and high quality finish.May also be used for bonding.

EN 12004

IN C

OMPL



ILES

EN 12004

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

48

5. GROUTS FOR CERAMIC TILES

TECHNICAL DATA:Waiting time before finishing: from 15-20 minutes, according to surrounding conditions and absorption of the tiles.Set to light foot traffic: 48 hours.Ready for use: 7 days.Colours: 100 white, 111 silver-grey and 132 beige 2000.Application: rubber trowel.Finishing: Scotch-Brite® pad and MAPEI sponge.Storage: 12 months.Consumption: according to the size of the joints.Packaging: 10 kg tubs.

FlexcolorReady-to-use, polymer filler paste with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints in ceramic tiles 2 to 10 mm wide.

TECHNICAL DATA:Maximum dosage: 10% in weight of KERAPOXY DESIGN.Colours: silver and light gold. 22 other colours available upon request.Packaging: boxes of 10x100 g packets.

MapeGlitterPolyester, aluminium and epoxy resin metal-effect coloured glitter mixed with used for mixing with KERAPOXY DESIGN.

TECHNICAL DATA:Pot life of mix: 45 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals.Colours: 113 and 130.Application: rubber MAPEI trowel.Finishing: Scotch Brite® pad and MAPEI sponge (or single-head rotary polisher with Scotch Brite® type abrasive felt disk and rubber rake).Storage: 24 months.Consumption: according to the size of the joints.Packaging: 10 kg units.

Kerapoxy PEasy-to-apply, two-component, anti-acid epoxy mortar with good cleanability properties for grouting joints at least 3 mm wide.

TECHNICAL DATA:Pot life of mix: 45 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals.Colours: 113 and 130.Application: rubber MAPEI trowel.Finishing: Scotch Brite® pad and MAPEI sponge (or single-head rotary polisher with Scotch Brite® type abrasive felt disk and rubber rake).EMICODE: EC1 R Plus - very low emission.Storage: 24 months.Consumption: according to the size of the joints.Packaging: 10 kg units.

Kerapoxy IEGTwo-component epoxy mortar with extremely high chemical resistance for grouting joints at least 3 mm wide.

5.3 Ready-to-use paste products __________________________________________________________________

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

IN C

OMPL


EN 13888

REACTION RESIN GRO

UT

SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE

52

6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE

TECHNICAL DATA:Mixing ratio: 1 25 kg sack of MAPESTONE TFB 60 with 1.8-2 l of water.Waiting time before putting into service: 7 days.Grouting joints: fresh on fresh.Storage: 12 months.Consumption: 20 kg/m² per centimetre of thickness.Packaging: 25 kg.

Mapestone TFB 60Pre-blended mortar with high compressive strength and good resistance to de-icing salts and freeze-thaw cycles, exposure class XF4, for installation screeds for architectonic stone flooring.

TECHNICAL DATA:Pot life of mix: 20 minutes.Set to foot traffic: 6 hours.Waiting time before putting into service: 7 days.Colour: grey.Application: rubber MAPEI trowel or rake.Cleaning: MAPEI sponge or Scotch-Brite® pad (or single-head rotary polisher with Scotch Brite® type abrasive felt disk). As an alternative, hydro-cleaner once it has started to harden.Storage: 12 months.Consumption: according to the size of the joints and slabs.Packaging: 25 kg.

Mapestone PFS PCC 2Pre-blended, polymer-modified mortar with a low modulus of elasticity, high compressive strength and good resistance to de-icing salts and freeze-thaw cycles, exposure class XF4, for grouting architectonic stone floors.

TECHNICAL DATA:Pot life of mix: 20 minutes.Set to foot traffic: 6 hours.Waiting time before putting into service: 7 days.Colour: grey.Application: rubber MAPEI trowel or rake.Cleaning: MAPEI sponge or Scotch-Brite® pad (or single-head rotary polisher with Scotch Brite® type abrasive felt disk). As an alternative, hydro-cleaner once it has started to harden.Storage: 12 months.Consumption: according to the size of the joints and slabs.Packaging: 25 kg.

Mapestone PFS 2Pre-blended mortar for grouting architectonic stone floors, exposure class XF4, with high compressive strength and good resistance to de-icing salts and freeze-thaw cycles.

TECHNICAL DATA:Pot life of mix: 20 minutes.Set to light foot traffic: 1 hour.Ready for use: 3 days for light to medium traffic, 7 days for heavy traffic.Colour: 113 cement grey.Application: rubber MAPEI trowel or rake.Cleaning: MAPEI sponge or Scotch Brite® pad (or single-head rotary polisher with Scotch Brite® type abrasive felt disk). As an alternative, hydro-cleaner once it has started to harden.Storage: 12 months.Consumption: according to the size of the joints and slabs.Packaging: 25 kg bags.

Keracolor PPNHigh-strength, quick-setting pozzolan mortar with very low water absorption for grouting paved floors with joints from 5 to 30 mm wide subject to heavy loads and intense traffic.

ELASTIC SEALANTS AND ADHESIVES

56

TECHNICAL DATA:Movement in service: 20%.Modulus of elasticity at 100% elongation: 0.36 N/mm².Shore A hardness: 18.Workability time: 25’.Colours: transparent and white.Application: extrusion gun.Consumption: 2.8 metres per 280 ml cartridge (10x10 mm section).Packaging: 280 ml cartridges.

Mapesil Z PlusMould-resistant acetic silicone sealant for sanitary fittings for movements up to 20%.

TECHNICAL DATA:Movement in service: 20%.Modulus of elasticity at 100% elongation: 0.36 N/mm².Shore A hardness: 18.Workability time: 25’.Colours: transparent and black.Application: extrusion gun.Consumption: 2.8 metres per 280 ml cartridge (10x10 mm section).Packaging: 280 ml cartridges.

Mapesil ZAcetic silicone sealant for glass for movements up to 20%.

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 20.Workability time: 20 minutes.Colours: transparent + 26 colours coordinated with the “MAPEI Coloured Grouts” range.Application: extrusion gun.Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapesil ACPure, anti-mould, acetic silicone sealant with BioBlock® technology for movements up to 25%.

Certification: ISO 11600 F 25 LM.DIN 18540BS 5889ASTM C 920TT S 00230CTT S 001543A

7. ELASTIC SEALANTS AND ADHESIVES

7.1 Acetic silicone sealants _______________________________________________________________________

TECHNICAL DATA:Movement in service: 20%.Modulus of elasticity at 100% elongation: 0.60 N/mm².Shore A hardness: 20.Workability time: 6’ (+23°C, 50% R.H.).Colours: black.Application: extrusion gun.Consumption: 3.0 metres per 300 ml cartridge (10x10 mm section).Packaging: 300 ml cartridge.

Mapesil 300°CAcetic silicone sealant for high temperatures.

57

TECHNICAL DATA:Movement in service: 5%.Shore A hardness: 65.Workability time: 45 minutes.Set to light foot traffic: 24-36 hours.Colour: 113 grey.Application: by pouring.Consumption: 0.15 kg/m (10x10 mm section).Packaging: 5 kg drums (A+B).

Mapeflex PU21Two-component, high-strength, castable epoxy-polyurethane sealant for movements up to 5%.

TECHNICAL DATA:Movement in service: 10%.Shore A hardness: 50.Workability time: 45 minutes.Set to light foot traffic: 24-36 hours.Colour: 113 grey.Application: by pouring.Consumption: 0.14 kg/m (10x10 mm section).Packaging: 10 kg drums (A+B).

Mapeflex PU20Two-component, high-strength, castable epoxy-polyurethane sealant with high chemical resistance for movements up to 10%.

ISO 11600 F 7.5 P

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 12.Workability time: 45 minutes.Set to light foot traffic: 24 hours.Colour: black.Application: by pouring.Consumption: 0.14 kg/m (10x10 mm section).Packaging: 10 kg drums (A+B).

Mapeflex PB27Two-component, castable, modified-polyurethane sealant resistant to hydrocarbons with a low modulus of elasticity, for movements up to 25%.

ISO 11600 F 25 LM

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 20.Workability time: 30 minutes.Set to light foot traffic: 24 hours.Colour: black.Application: trowel, extrusion gun.Consumption: 0.14 kg/m (10x10 mm section).Packaging: 10 kg drums (A+B).

Mapeflex PB25Two-component, thixotropic, modified-polyurethane sealant resistant to hydrocarbons with a low modulus of elasticity, for movements up to 25%.

ISO 11600 F 25 LM

7.2 Polyurethane sealants and adhesives ___________________________________________________________

58

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.32 N/mm².Shore A hardness: 20.Workability time: 90 minutes.Colour: grey.Application: by pouring with extrusion gun.Consumption: 6.0 metres per 600 ml soft-cartridge (10x10 mm section).Packaging: 600 ml soft-cartridges.

Mapeflex PU50 SLPaintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%.

ISO 11600 F 25 LM

TECHNICAL DATA:Movement in service: 20%Modulus of elasticity at 100% elongation: 0.80 N/mm².Shore A hardness: 40.Workability time: 1 hour.Colours: – white, grey, black (300 ml cartridge);– grey, black (600 ml soft cartridge).Certification: ISO 11600 F 20 HM, certified in Poland as suitable for contact with drinking water.EMICODE: EC1 R - very low emission.Application: extrusion gun.Consumption: – 3.0 metres per 300 ml cartridge; – 6.0 metres per 600 ml tube (10x10 mm section).Packaging: 300 ml cartridges, 600 ml soft-cartridges.

Mapeflex PU45Paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%.

ISO 11600 F 20 HM

TECHNICAL DATA: Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.33 N/mm².Shore A hardness: 25.Workability time: 4 hours.Colours: white and grey (other colours upon request).EMICODE: EC1 R - very low emission.Application: extrusion gun.Consumption: – 3.0 metres per 300 ml cartridge; – 6.0 metres per 600 ml soft-cartridges (10x10 mm

section).Packaging: 300 ml cartridges, 600 ml soft-cartridges.

Mapeflex PU40Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%.

ISO 11600 F 25 LM


TECHNICAL DATA:Movement in service: 10%.Shore A hardness: 65.Workability time: 35 minutes.Set to light foot traffic: 24-36 hours.Colour: 113 grey.Application: trowel, extrusion gun.Consumption: 0.15 kg/m (10x10 mm section).Packaging: 5 kg drums (A+B).

Mapeflex PU30Two-component, high-strength, thixotropic epoxy-polyurethane sealant with high chemical resistance for movements up to 10%.

ISO 11600 F 7.5 P

59

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 20.Workability time: 15 minutes.Colours: transparent, 100 white, 110 grey, 112 grey, 113 cement grey, 114 anthracite, 120 black, 130 jasmine and 132 beige 2000 (see “MAPEI Coloured Grouts”).Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapesil LMNeutral silicone anti-mould sealant with BioBlock® technology for stone for movements up to 25%.

ISO 11600 F 25 LMISO 11600 G 25 LMASTM C 920ASTM C 1248DIN 18540DIN 18545-2BS 5889TT S 00230CTT S 001543A

TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 25.Workability time: 15 minutes.Colours: transparent, grey, copper and dark brown.Application: extrusion gun.Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapesil BMNeutral silicone sealant for metal-work for movements up to 25%.

ISO 11600 F 25 LMISO 11600 G 25 LM

TECHNICAL DATA:Shore A hardness: 80.Workability time: 2-3 hours.Colour: black.Application: by pouring.Consumption: 1.2 kg/litre (10x10 mm section).Packaging: 10 kg drums (A+B).

Mapeflex PU65Two-component, castable polyurethane sealant for sealing joints in roads up to surface level, mixed with QUARTZ 0.5 sand at a ratio of up to 1:1 in weight. Setting and hardening may be accelerated by adding a specific liquid accelerator.

7.3 Neutral silicone sealants ______________________________________________________________________

7.4 Hybrid sealants and adhesives _________________________________________________________________

TECHNICAL DATA:Movement in service: 20%.Modulus of elasticity at 100% elongation: 0.80 N/mm².Shore A hardness: 40.Workability time: 20’ (+23°C, 50% R.H.).Colours: white, grey.Certification: ISO 11600 F 20 HM, certified in Poland as suitable for contact with drinking water.EMICODE: EC1 R Plus - very low emission.Application: extrusion gun.Consumption: 3.0 meters per 300 ml cartridge (10x10 mm section).Packaging: 300 ml cartridge.

Mapeflex MS45Hybrid sealant and adhesive with a high modulus of elasticity.

ISO 11600 F 20 HM

60

TECHNICAL DATA:Movement in service: 12.5%.Modulus of elasticity at 50% elongation: 0.12 N/mm².Shore A hardness: 20.Workability time: 15 minutes.Colours: white and grey.Application: gun for soft-cartridges.Consumption: 5.5 metres per 550 ml soft-cartridge (10x10 mm section).Packaging: 550 ml soft-cartridges.

Mapeflex AC-PROPro-grade paintable acrylic sealant for movements up to 12.5%.

TECHNICAL DATA:Movement in service: 12.5%.Modulus of elasticity at 50% elongation: 0.10 N/mm².Shore A hardness: 15.Workability time: 15 minutes.Colour: white.Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapeflex AC-PPaintable acrylic sealant with a render-effect finish for movements up to 12.5%.


TECHNICAL DATA:Movement in service: 12.5%.Modulus of elasticity at 50% elongation: 0.12 N/mm².Shore A hardness: 25.Workability time: 10 minutes.Colour: grey.Consumption: 5.5 metres per 550 ml soft-cartridge (10x10 mm section).Packaging: 550 ml soft-cartridges.

Mapeflex AC-FRPaintable acrylic sealant for fire-break joints with movements up to 12.5%.Resistant to fire for up to 212 minutes.

EN 1366-4

TECHNICAL DATA:Movement in service: 12.5%.Modulus of elasticity at 50% elongation: 0.20 N/mm².Shore A hardness: 19.Workability time: 5 minutes.Colours: white and grey.Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapeflex AC4Paintable acrylic sealant for movements up to 12.5%.

ISO 11600 F 12.5 P up

7.5 Other sealants ______________________________________________________________________________

61

TECHNICAL DATA:Viscosity: creamy thixotropic paste.Density: 1.45 kg/l.Open time: 10-15 minutes.Initial tensile strength: 25 N/cm².Final tensile strength: 400 N/cm² (wood/wood).Initial shear strength: 250 N/cm² (wood/wood).Final shear strength: 300 N/cm² (wood/wood).Hardening time: 24-48 hours.Dry solids content: 70%.EMICODE: EC1R Plus - very low emission.Colour: white.Application: extrusion gun.Consumption: 15 metres per 310 ml cartridge (φ 5 mm bead).Packaging: 310 ml cartridges.

TECHNICAL DATA:Viscosity: thixotropic paste.Density: 1.55 kg/l.Open time: 5’.Initial tensile strength: 25 N/cm².Final shear strength: 300 N/cm².Hardening time: 2 h.EMICODE: EC1R Plus - very low emission.Colour: white.Application: gun.Consumption: 5 metres per 300 ml cartridge (triangular section).Packaging: 300 ml cartridges.

Ultrabond Super GripAdhesive for mounting internal fixtures.

Ultrabond MS RapidRapid-setting assembly adhesive for internal and external use with a high sucker effect.

TECHNICAL DATA:Movement in service: plastic product.Dry solids content: 90%.Elongation at failure: 65%.Colours: black.Application: extrusion gun, trowel.Consumption: 3.0 meters per 300 ml cartridge (10x10 mm section).Packaging: 300 ml cartridge.

Mapeflex BlackfillBituminen sealant.

TECHNICAL DATA:Movement in service: none.Workability time: 6’ (+23°C, 50% R.H.).Final hardening time: 4 mm / 24 hours.Colours: grey.Application: extrusion gun, trowel.Consumption: 3.0 meters per 300 ml cartridge (10x10 mm section).Packaging: 300 ml cartridge.

Mapeflex Firestop 1200°CRefractory grout.

NEW

62


TECHNICAL DATA:Application of sealant: after 60 minutes.Colour: transparent straw yellow.Application: brush.Consumption: 3-9 g/m (1 cm-deep joint).Packaging: 200 g bottles.

Primer FDOne-component primer for silicone sealants.

TECHNICAL DATA:Workability time after mixing: 4-5 hours.Application of sealant: after 24 hours:Colour: transparent.Application: brush and roller.Consumption: 0.5-0.7 kg/m².Packaging: 10 kg met. drums (A+B).

Primer EPTwo-component epoxy primer in solvent for consolidating and waterproofing cementitious screeds and industrial floorings.

TECHNICAL DATA:Density: 40 kg/m³.Diameters and packaging: Ø 6 mm, boxes of 550 mØ 10 mm, boxes of 550 mØ 15 mm, boxes of 550 mØ 20 mm, boxes of 350 mØ 25 mm, boxes of 200 mØ 30 mm, boxes of 160 m

MapefoamClosed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints.Supplied in rolls in various lengths according to the diameter of the foam.

7.7 Accessories and primers for sealants ___________________________________________________________

TECHNICAL DATA:Viscosity: fluid liquid.Final tensile strength: like the bonded PVC-pipe.Dry solids content: 35%.Colour: red.Application: brush.Consumption: according to requirements.Packaging: 90 g tubes.

Adesilex T SuperAdhesive for welding high-pressure PVC pipes.

7.6 Adhesive for PVC ____________________________________________________________________________

63

TECHNICAL DATA:Application of sealant: after 24 hours:Colour: brown.Application: brush, roller or watering can.Consumption: 0.4-1.2 kg/m².Packaging: 10 kg met. drums.

Primer PU60One-component primer for MAPEFLEX PB25 and MAPEFLEX PB27, polyurethane sealants.

TECHNICAL DATA:Application of sealant: after 40 minutes.Colour: brown.Consumption: 1.5-2 g/m (1 cm - deep joint).Packaging: 250 g bottles.

Primer MOne-component solvent-free primer for polyurethane adhesives for non-absorbent surfaces.

TECHNICAL DATA:Application of sealant: after 20’.Colours: transparent.Application: brush.Consumption: 150 g/m² (10-50 g/metre of treated 1 cm-deep joint).Packaging: 150 g bottles.

Primer POne-component primer for sealants applied on plastics.

ADHESIVES AND FINISHING PRODUCTS FOR PARQUET

66

TECHNICAL DATA:Consistency: comp. A: paste; comp. B: paste.Colour: comp. A: beige or brown; comp. B: off-white.Mixing ratio: comp. A : comp. B = 90 : 10.Pot life of mix: 60-70 minutes.Open time: 1 hour.Set to light foot traffic: after 24 hours.Sanding: after 3 days.Storage: 24 months.Application: N° 2 or 4 notched trowel for wood.Consumption: 1.0-1.5 kg/m².Packaging: 10 kg drums (A+B).

Ultrabond P902 2KTwo-component epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic, marble, and terrazzo floors, etc.Also suitable for heated substrates.

TECHNICAL DATA:Consistency: creamy paste.Colour: beige.Open time: 50-60 minutes.Set to light foot traffic: after 12 hours.Sanding: after 3 days.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: N° 2 or 4 notched trowel for wood.Consumption: 800-1200 g/m².Packaging: 15 kg plastic drums.

Ultrabond Eco S955 1KOne-component, isocyanate and solvent-free, sililated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet.

TECHNICAL DATA:Consistency: creamy paste.Colour: beige.Open time: approximately 25 minutes.Final hardening time: 24 hours.EMICODE: EC1 Plus - very low emission.Storage: 24 months. Protect from frost.Application: extrusion pistol.Consumption: 325 ml every 12 metres.Packaging: 310 ml cartridges.

Ultrabond Eco 575Solvent-free, synthetic polymer adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for bonding base-boards in place.

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid paste.Colour: comp. A: dark brown or beige; comp. B: off-white.Mixing ratio: comp. A : comp. B = 90 : 10.Pot life of mix: 60 minutes.Open time: 1 hour.Setting time: 5 hours.Set to light foot traffic: after 24 hours.Sanding: after 3 days.Storage: 24 months.Application: N° 2 or 4 notched trowel for wood. Consumption: 800-1000 g/m².Packaging: 5 kg and 10 kg drums (A+B).

LignobondTwo-component, water and solvent-free epoxy-polyurethane adhesive for laying parquet. Suitable for laying any size and type of wood on all substrates.Ideal for heated screeds.

8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET

8.1 Adhesives for wooden and laminate floors _______________________________________________________

67

TECHNICAL DATA:Consistency: creamy paste.Colour: white, oak, iroko, doussie, wengè, teak, walnut, cherry, beech, maple and birch.Open time: 10-20 minutes.Sanding: after 24 hours. After sanding, the product may be varnished.EMICODE: EC1 - very low emission.Storage: 12 months.Application: extrusion pistol loaded with cartridge of product.Consumption: according to the size of the joint to be filled, calculating that its density is equal to 1.75 g/cm³.Packaging: 310 ml cartridges.

SilwoodAcrylic sealant in water dispersion for wooden floors.

TECHNICAL DATA:Consistency: creamy paste.Colour: beige.Open time: 110 minutes.Set to light foot traffic: after 12 hours.Sanding: after 3 days.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: N° 2 or 4 notched trowel for wood.Consumption: 800-1200 g/m².Packaging: 15 kg plastic drums.

Ultrabond S965 1KOne-component, isocyanate and solvent-free, sililated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet.

TECHNICAL DATA:Consistency: creamy paste.Colour: beige and brown.Open time: 110 minutes.Set to light foot traffic: after 12 hours.Sanding: after 3 days.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: N° 2 or 4 notched trowel for wood.Consumption: 0.8-1 kg/m².Packaging: 7 and 15 kg aluminium bags contained in plastic drums. Boxes containing 20x600 cc soft-cartridges.

Ultrabond P990 1KOne-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old wooden, ceramic, marble and terrazzo floors, etc.Also suitable for heated substrates.

TECHNICAL DATA:Consistency: paste.Colour: black.Sanding and varnishing: 4-5 days after removing traces of excess product.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: extrusion gun.Consumption: according to the size of the joint.Packaging: 600 ml soft-cartridges.

Silwood DeckingSolvent and isocyanate-free, sililated polymer sealant with very low emission level of volatile organic compounds (VOC) with a low modulus of elasticity, suitable for sealing all types of wooden floors on internal and external substrates.Ideal for sealing joints in external wooden floors and joints between different types of flooring materials.

8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet ___________________________________

68


TECHNICAL DATA:Consumption: from 5% to 10% of the consumption of the varnish according to the dilution rate.Packaging: 1 litre drums, 6x1 l boxes.

Ultracoat ELSlow-evaporating mixture to increase the open time of varnish for parquet.

TECHNICAL DATA:Consistency: liquid gel.Colour: transparent.Density (g/cm³): 1.0.Brookfield Viscosity (mPa·s): 6000/8000.Storage: 12 months.Application temperature range: from +10°C to +35°C.Sanding: after approx. 1 hour.Varnishing: after 100-120 mins. with water-based varnishing cycles.Consumption: 100-120 g/m² per coat.Packaging: 5 litre drums.

Ultracoat BinderSolvent and NMP-free, water-based binder, mixed with wood flour filler from any type of wood, for grouting wooden floors. Suitable for ULTRACOAT water-based varnishing cycles and ULTRACOAT OIL.

TECHNICAL DATA:Consistency: liquid gel.Colour: off-white.Density (g/cm³): 1.0.Brookfield Viscosity (mPa·s): 2000-3000.Storage: 12 months.Application temperature range: from +10°C to +35°C.Sanding: after approx. 1 hour.Varnishing: after 2 hours with water-based varnish cycles.Consumption: 100-120 g/m² per coat.Packaging: 5 litre drums, 2x5 l boxes.

Ultracoat Aqua PlusSolvent and NMP-free, odourless, water-based binder, mixed with wood flour filler, for grouting wooden floors. Suitable for ULTRACOAT water-based varnishing cycles and ULTRACOAT OIL.

TECHNICAL DATA:Consistency: liquid.Colour: transparent.Gloss factor: extra matte (10 gloss), matte (30 gloss) and satin (60 gloss).Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water or with ULTRACOAT EL.Sanding: after 8 hours.Painting: after 3 hours, and within a maximum of 5 hours.Ready for use: 36-48 hours.Storage: 12 months.Application: roller or brush.EMICODE: EC1 - very low emission level.Consumption: 70-90 g/m² per coat.Packaging: 5 litre drums, 2x5 l boxes.

Ultracoat Easy PlusOne-component, water-based polyurethane varnish with very low emission level of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors. Suitable for floors subject to frequent pedestrian use.

69

TECHNICAL DATA: comp. A comp. BConsistency: liquid liquid.Colour: milky white transparent.Density (kg/m³): 1.030 1.075.Storage: 12 months 12 months.EMICODE: EC1 R - very low emission level.Duration of mix: 2 hours.Mixing ratio: comp. A: comp. B = 5 : 1 (in volume).Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or with ULTRACOAT EL.Sanding: after 12 hours.Varnishing (without sanding): after 2 hours, within 5 hours.Consumption: 80-100 g/m² per coat.Packaging: 6 litre kits (A+B), 2x6 l boxes.

Ultracoat Premium BaseTwo-component, NMP-free, water-based undercoat with very low emission of volatile organic compounds and high insulating capacity, for preparing solid and pre-sanded wooden floors and wooden floors under repair for water-based finishing cycles.

TECHNICAL DATA:Consistency: fluid.Storage: 24 months. Protect from frost.Application: wax spreader.Drying time: 30-60 minutes at +20°C. Complete hardening after 24 hours.Set to light foot traffic: 1 hour.Ready for use: 3 days.Consumption: approx. 15 g/m².Packaging: 5 litre drums, 2x5 l boxes.

Ultracoat Oil CareNatural drying resin oil in water dispersion for finishing wooden floors treated with oil.

TECHNICAL DATA: comp. A comp. BConsistency: liquid liquid.Colour: transparent off-white.Density of Ultracoat High Traffic 10 gloss (g/cm³): 1.040 1.060.Density of Ultracoat High Traffic 30 gloss (g/cm³): 1.030 1.120.Density of Ultracoat High Traffic 60 gloss (g/cm³): 1.040 1.080.Storage: 12 months.Dusty dry: 25 mins.Touch dry: 40 mins.Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water.Sanding: after 12 hours.Varnishing (without sanding): after 2 hours, within 5 hours.Ready for service: 36-48 hours.Gloss factor: (10-30-60 gloss).Consumption: first coat 80-100 ml/m²; successive coats 50-70 ml/m².Packaging: 11 l kits (A+B) 2x5.5 l.

Ultracoat High TrafficTwo-component, NMP-free, 100% polyurethane water-based varnish with high resistance to wear and abrasion and very low emission of volatile organic compounds for wooden floors. Suitable for floors subject to extremely high pedestrian use.

TECHNICAL DATA:Consistency: fluid.Storage: 24 months. Once opened a skin forms on the surface and then hardens with time.Application: with a roller or trowel (ULTRACOAT OIL ROLLER/ULTRACOAT STEEL SPATULA).Consumption:– absorbent floors: approx. 150 g/m²;– floors with low absorbency: approx. 70 g/m².Packaging: 5 litre drums, 2x5 l boxes.

Ultracoat OilNatural drying oil resin for treating wooden floors with an oil finish.

FIRE RESISTANT PROTECTION

SYST

EM


SYST

EM

ULTRACOAT


SYST

EM


SYST

EM

ULTRACOAT

70


TECHNICAL DATA:Consistency: liquid.Colour: transparent.Storage: 12 months.Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL.Sanding: after 2 hours.Varnishing (without sanding)(for three-coat cycles): after 2 hours, within 5 hours.Consumption: 80-100 g/m² per coat.Packaging: 5 litre units.

Ultracoat Universal BaseOne-component, NMP-free, water-based rapid undercoat with very low emission of volatile organic compounds, for wooden floors.

TECHNICAL DATA: comp. A comp. BConsistency: liquid liquidColours: milky white transparentDensity (g/cm³): 1.030 1.075Storage: 12 months 12 monthsPot life of mix: 2 hours.Mixing ratio: comp. A : comp. B = 5 : 1 (in volume).Maximum permitted dilution ratio (Dir. 2004/42/EC): 10% with clean water or ULTRACOAT EL.Buffing: after 16/24 hours.Varnishing without sanding: after 2 hours and within 5 hours.Consumption: 80-100 g/m² per coat.Packaging: 6 l units (A+B).

Ultracoat Toning BaseTwo-component, water-based toning undercoat with high insulating properties, very low emissions of volatile organic compounds (VOC) and no NMP for preparing solid and pre-sanded wooden floors and wooden floors under repair prior to applying Ultracoat water-based finishing cycles.

NEW

ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS

74

TECHNICAL DATA:Colour: light beige.Waiting time: 10-20 minutes.Open time: 50 minutes.Set to foot traffic: 3-4 hours.Waiting time before putting into service: approx. 48 hours.Storage: 12 months in its original sealed packaging.Application: N° 1 or 2 trowel.Consumption: 0.25-0.35 kg/m².Packaging: 16 kg drums.

Ultrabond Eco 375Adhesive in water dispersion with a strong and quick initial bond, long open time, for vinyl floors.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: from 0 to 10 minutes.Open time: maximum 30 minutes.Set to light foot traffic: 2-3 hours.Ready for use: 24 hours.EMICODE: EC1 - very low emission.Storage: 24 months. Protect from frost.Application: N° 1 or 3 notched trowel.Consumption: 0.3-0.45 kg/m².Packaging: 16 kg drums.

Ultrabond Eco 185Solvent-free, quick-setting synthetic polymer adhesive in water dispersion with a very low emission level of volatile organic compounds (VOC) for bonding textile flooring and coverings.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: 0-10 minutes.Open time: maximum 30 minutes.Set to light foot traffic: after 2 hours.Ready for use: approximately 24 hours.EMICODE: EC1 - very low emission.Storage: 12 months in its original packaging. Protect from frost.Application: N° 1, 2 or 3 notched trowel.Consumption: 0.25-0.45 kg/m².Packaging: 16 and 25 kg drums.

Mapecryl EcoAcrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC).

TECHNICAL DATA:Consistency: creamy paste.Colour: whiteWaiting time: from 0 to 10 minutes.Open time: maximum 30 minutes.Storage: 12 months. Protect from frost.Application: N°1 notched trowel on the wall or, after dilution, by roller on the coating.Consumption: 0.15-0.25 kg/m².Packaging: 5 and 20 kg drums.

Adesilex MT32Adhesive in water dispersion for laying all types of wall coatings: tufted wallpaper, flock-print, heavy fabrics, glass fibre fabrics, etc.

9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS

9.1 Adhesives in water dispersion _________________________________________________________________

75

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: 30 minutes - 12 hours.Set to light foot traffic: immediately after laying.Ready for use: immediately after laying.EMICODE: EC1 - very low emission.Storage: 12 months. Protect from frost.Application: N° 1 trowel or by roller.Consumption: 0.10-0.20 kg/m².Packaging: 10 kg drums.

Ultrabond Eco FixAdhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: from 0 to 20 minutes. Open time: 15-20 minutes.Set to light foot traffic: approximately 3 hours.Ready for use: 24 hours. EMICODE: EC1 Plus - very low emission.Storage: 12 months. Protect from frost.Application: notched trowel.Consumption: consumption varies according to the flatness of the substrate, the type of backing on the flooring material and the type of trowel used, and ranges from 0.3 to 0.5 kg/m².Packaging: 16 kg drums.

Ultrabond Eco 520Adhesive in water dispersion with a strong initial bond and very low emission level of volatile organic compounds (VOC), specially formulated for linoleum.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: 10-20 minutes.Open time: 70 minutes.Set to light foot traffic: 3-4 hours.Ready for use: 48 hours.EMICODE: EC1 Plus - very low emission.Storage: 12 months. Protect from frost.Application: N° 1 or 2 notched trowel.Consumption: 0.25-0.35 kg/m².Packaging: 16 kg drums.

Ultrabond Eco 380Adhesive in water dispersion with a strong initial bond, long open time and very low emission level of volatile organic compounds (VOC) for vinyl floors.

TECHNICAL DATA:Consistency: liquid.Colour: light beige.Waiting time: 30 minutes - 12 hours.Set to light foot traffic: immediately after laying.Ready for use: immediately after laying.EMICODE: EC1 - very low emission.Storage: 12 months.Application: by roller.Consumption: 0.1-0.2 kg/m².Packaging: 15 kg drums.

Ultrabond Eco TackAdhesive with permanent tack in water dispersion with a very low emission of volatile organic compounds for self-laying textile squares.

76


TECHNICAL DATA:Consistency: creamy paste.Colour: white.Open time: 10-15 minutes.Final hardening time: 24-48 hours.EMICODE: EC1R Plus - very low emission.Storage: 24 months. Protect from frost.Application: extrusion pistol.Consumption: 15 metres per 310 ml cartridge (φ 5 mm bead).Packaging: 310 ml cartridges.

Ultrabond Super GripAdhesive for mounting internal fixtures.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: approximately 10-20 minutes (30-40 minutes on non-absorbent substrates).Open time: 30-40 minutes.Set to foot traffic: 24 hours.Ready for service: 72 hours.EMICODE: EC1 Plus - very low emission level.Storage: 12 months. Protect from freezing weather.Application: N° 1 or 2 notched trowel.Consumption: 0.25-0.4 kg/m².Packaging: 16 kg drums.

Ultrabond Eco V4 SP FiberMulti-purpose, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres, particularly suitable for laying rubber and PVC flooring.

TECHNICAL DATA:Consistency: creamy paste.Colour: light grey.Waiting time: from 0 to 10 minutes.Open time: 15 minutes.Set to light foot traffic: 2-4 hours.Ready for use: after approx. 24-48 hours.Electrical resistance: 100,000 ohm.EMICODE: EC1 Plus - very low emission.Storage: 12 months. Protect from freezing weather.Application: notched trowel.Consumption: 0.3-0.4 kg/m².Packaging: 16 kg drums.

Ultrabond Eco V4 SP ConductiveLight-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring.

TECHNICAL DATA:Consistency: creamy paste.Colour: light beige.Waiting time: approximately 10-20 minutes (30-40 minutes on non-absorbent surfaces).Open time: 40-45 minutes.Set to light foot traffic: 24 hours.Ready for use: 72 hours.EMICODE: EC1 Plus - very low emission.Storage: 12 months. Protect from frost.Application: N° 1 or 2 notched trowel.Consumption: 0.25-0.4 kg/m².Packaging: 8 and 16 kg drums.

Ultrabond Eco V4 SPMulti-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and carpet flooring.

NEW

NEW

NEW

77

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour: comp. A: beige, comp. B: transparent.Mixing ratio: comp. A : comp. B = 94 : 6.Pot life of mix: 40-50 minutes.Open time: 1 hour.Setting time: 10 hours.Set to light foot traffic: 12-24 hours.Ready for use: 3 days at +23°C.Storage: 24 months.Application: N° 1 or 3 notched trowel.Consumption: 0.35-0.50 kg/m².Packaging: 5 and 10 kg drums.

Adesilex G20Two-component, low-viscosity epoxy-polyurethane one-buttering adhesive, for bonding resilient floors on internal and external absorbent and non-absorbent substrates.Also available in a rapid version.

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour: comp. A: black; comp. B: straw yellow.Mixing ratio: comp. A : comp. B = 90 : 10.Pot life of mix: 30 minutes.Open time: 50 minutes.Setting time: 5 hours.Set to light foot traffic: 12-24 hours.Ready for use: 3 days.Electrical resistance: 150,000 ohm.Storage: 24 months.Application: N° 1 or 3 notched trowel.Consumption: 0.3-0.45 kg/m².Packaging: 10 kg drums.

Adesilex G19 ConductiveTwo-component epoxy-polyurethane one-buttering adhesive, for bonding resilient conductive flooring on both absorbent and non-absorbent substrates.

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour: comp. A: beige, red, green or black; comp. B: straw yellow.Mixing ratio: comp. A : comp. B = 94 : 6.Pot life of mix: 50-60 minutes.Setting time: 9 hours.Set to light foot traffic: 12-24 hours.Ready for use: 3 days at +23°C.Storage: 24 months.Application: N° 1 or 3 notched trowel.Consumption: 0.4-1.0 kg/m².Packaging: 5 and 10 kg drums.

Adesilex G19Two-component epoxy-polyurethane one-buttering adhesive, for bonding resilient floors on internal and external absorbent and non-absorbent substrates.Also available in a rapid version.

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour:– comp. A: grey;– comp. B: brown.Mixing ratio: comp. A : comp. B = 86 : 14.Pot life of mix: approximately 30 minutes.Open time: 50-60 minutes.Setting time: approximately 4 hours.Set to light foot traffic: 12-24 hours.Ready for use: after 3 days.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: N° 1 or 3 notched trowel.Consumption: 0.3-0.6 kg/m².Packaging: 10 kg drums.

Ultrabond Eco 571 2KTwo-component, low-viscosity polyurethane adhesive with no water or solvents for bonding internal and external PVC and rubber flooring.

9.2 Reactive adhesives __________________________________________________________________________

NEW

NEW

NEW

78


TECHNICAL DATA:Thickness: 0.100 mm.Height of roll: 400 mm.Length of roll: 300 metres.

Ultrabond Turf Tape 100Jointing strip for fixing synthetic grass sheets in place and marking out lines for various sporting disciplines.

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour: green and red.Mixing ratio: comp. A : comp. B = 90 : 10.Pot life of mix: 60 minutes.Application temperature range: from 0°C to +35°C.Open time: 70-80 minutes.EMICODE: EC1 R Plus - very low emission.Set to light foot traffic: 12-24 hours.Storage: 12 months.Application: N° 3 or 4 notched trowel.Consumption: 0.4-0.5 kg per metre of 40 mm wide jointing strip (10 kg of adhesive for 20-25 metres of jointing strip).Packaging: 10 kg drums.

Ultrabond Turf PU 2KTwo-component polyurethane adhesive for bonding jointing strips between sheets of synthetic grass with very low emission level of volatile organic compounds (VOC).

TECHNICAL DATA:Consistency: comp. A: thick paste; comp. B: fluid liquid.Colour: comp. A: green/red/white; comp. B: brown.Inflammable: no.Mixing ratio: comp. A : comp. B = 90 : 10.Pot life of mix: 30 minutes.Application temperature range: from 0°C to +35°C.Open time: 40-45 minutes.EMICODE: EC1 R - very low emission.Set to light foot traffic: after 12-24 hours.Storage: 12 months.Application: N° 3 or 4 notched trowel.Consumption: 0.4-0.5 kg per metre of 40 mm wide jointing strip (10 kg of adhesive for 20-25 metres).Packaging: 10 kg drums.

Ultrabond Turf 2 Stars2-component, rapid-setting polyurethane adhesive with very low emission of volatile organic compounds (VOC) for bonding synthetic grass.

TECHNICAL DATA:Consistency: creamy paste.Colour: green.Inflammable: no.Application temperature range: from 0°C to +35°C.Open time: 80-100 minutes.Set to light foot traffic: 12 hours.Storage: 12 months.Application: N° 3 or 4 notched trowel.Consumption: 0.30-0.35 kg per metre of 40 mm wide jointing strip (10 kg of adhesive for 22-25 metres of jointing strip).Packaging: 7 and 15 kg drums and 600 ml aluminium soft-cartridges.

Ultrabond Turf PU 1KOne-component, ready-to-use, polyurethane adhesive for bonding jointing strips between sheets of synthetic grass.

9.3 Adhesives for synthetic grass __________________________________________________________________

NEW

79

TECHNICAL DATA:Consistency: comp. A: powder; comp. B: thick liquid.Colours: comp. A: grey and white; comp. B: greenish white.Mixing ratio: GRANIRAPID white:

comp. A: 22.5 kg + comp. B: 5.5 kg. GRANIRAPID grey: comp. A: 25 kg; comp. + B: 5.5 kg.

Pot life of mix: 45 minutes.Application temperature range: from +5°C to +40°C.Open time: 20 minutes.Setting time: approx. 2 hours.Set to light foot traffic: after 3-4 hours.Ready for use: after approx. 24 hours (basins and swimming pools can be filled after 3 days).EMICODE: EC1 R Plus - very low emission.Storage: 12 months in a dry place in original unopened packaging.Application: N° 4, 5, 6 or 10 notched trowel.Consumption: 3-8 kg/m².Packaging: GRANIRAPID white: 28 kg kit

comp. A: 22.5 kg bag; comp. B: 5.5 kg bucket. GRANIRAPID grey: 30.5 kg kit comp. A: 25 kg bag; comp. B: 5.5 kg bucket.

GranirapidHigh performance, deforamable, fast setting two-component cementitious adhesive for rubber tiles with a dove-tail back.

TECHNICAL DATA:Colour: – adhesive: transparent; – reinforcement: orange.Weight per m²: 0.38 kg/m².Application temperature range: from +15°C to +35°C.Waiting time: none, bonds immediately.Set to foot traffic: immediate.Ready for use: immediate.Storage: 12 months.Height of roll: 35, 65, 85 and 240 mm.Length of roll: 50 m.Packaging– 35 mm: boxes containing 8x50 m long rolls;– 65 mm: boxes containing 4x50 m long rolls;– 85 mm: boxes containing 3x50 m long rolls;– 240 mm: boxes containing 1x50 m long roll.

MapecontactReinforced adhesive strip for laying profiles, base-boards, covings and resilient and textile coatings on steps.

9.4 Polychloroprenic contact adhesive ______________________________________________________________

9.5 Cementitious adhesive ________________________________________________________________________

COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS

82

TECHNICAL DATA:Consistency: highly fluid liquid.Set to light foot traffic: 12 hours.Ready for use: 3 days.Application: rag dipped in the product.Storage: 24 months.Consumption: 100-200 g/m² per coat.Packaging: 10 kg metal drums and 18x1 kg packages.

KerasealProtective, impregnating paint for porous tiles (Tuscany terracotta, etc.).

TECHNICAL DATA:pH of liquid: 12Waiting time before rinsing: several minutes. In the case of larger residues, leave the solution to react for longer or repeat the cleaning operation.Storage: 24 months.Application: by spray.Consumption: according to requirements.Packaging: – 0.75 kg spray bottles;– 5 kg canisters.

Kerapoxy CleanerSpecial cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY DESIGN and KERAPOXY CQ) from the surface of ceramic and glass coverings.

TECHNICAL DATA:pH of liquid: 1.13.Waiting time before rinsing: 5 minutes, according to the consistency of the dirt; keep applying until stains have been completely removed. Rinse well after cleaning.Storage: 24 months.Consumption: according to requirements.Packaging:– concentrated powder: 4x5 and 18x1 kg packages;– liquid ready for use: 5, 10 and 25 kg canisters and

12x1 kg packages;– 0.75 kg spray bottles.

KeranetAcid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid (15% in solution).

TECHNICAL DATA:Colour: available in 26 different colours.Application: by brush or bottle.Consumption: according to the size of the joint.Packaging: 1 kg tins and 160 g bottles.

Fuga FrescaAcrylic resin paint in water dispersion to bring back the colour of tile joints in ceramic tiles.

10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS

10.1 Complementary products for laying ceramic tiles and stone material ________________________________

83

TECHNICAL DATA:Length: 25 m.Width: 2 m.Thickness: 1.2 mm.Weight: 1.1 kg/m².Packaging: 25 m rolls. Weight of roll approx. 57 kg.

MapelayPVC waterproofing and isolating sheet reinforced with glass fibres, for laying internal resilient and fabric floors on substrates which have cracks, which are particularly dirty or damp or which are subject to capillary-action rising damp.

TECHNICAL DATA:– MAPETEX: width: 100 cm and 200 cm.– MAPETEX STRIP: width: 50 mm and 410 mm.Application: see Technical Data Sheet.Packaging: MAPETEX: 2 m x 50 m rolls; 1 m x 50 m rolls.MAPETEX STRIP: 50 mm x 25 m rolls; 410 mm by 10 m rolls; 410 mm x 5 m rolls.

Mapetex SystemSystem for laying removable ceramic tiles and stone material. Also used for isolating and anti-fracture layers.

TECHNICAL DATA:Use: added as an aggregate or for sprinkling on surfaces.Consumption:– as aggregate; mixing ratio of MAPEQUARZ: cement

from 1:1 to 2:1;– for sprinkling; from 2 to 5 kg/m².

MapequarzDry quartz aggregates with no impurities used for making cementitious mortar for tile joints or for sprinkling on surfaces to clean grout.

10.2 Complementary products for laying resilient and textile coverings ___________________________________

TECHNICAL DATA:Length of plug: 230 mm.Diameter of screw: 7 mm.Diameter of plug: 10 mm.Diameter of hole: 10 mm.Minimum depth of hole in reinforced cement and masonry: from 45 mm to 100 mm.Maximum thickness to be fastened: 160 mm.Packaging: boxes of 100 plugs.

Mapetherm Tile Fix 15Expansion plugs with 7 mm diameter zinc-plated steel screws for fastening up to 160 mm thick panels, supplied with a 10 mm diameter nylon plug and heat-stop washer.

84

TECHNICAL DATA:Packaging: plastic bottles with 80 damp wipes (20x30 cm).

Cleaner HDamp wipes for cleaning hands.

TECHNICAL DATA:Consistency: gel.Colour: transparent.Inflammable: yes.Application temperature range: from +10°C to +35°C.Removal time:– adhesives in water dispersion or in solution:

5 minutes;– reactive adhesives: 60 minutes.Storage: 24 months.Application: trowel.Consumption: 0.3 kg/m².Packaging: 2.5 kg drums.

Pulicol 2000Solvent gel for removing adhesive and paint.

TECHNICAL DATA:Consistency: liquid.Colour: black.Application temperature range: from +5°C to +40°C.Drying time: minimum 2 hours.Electrical resistance: 50,000 ohm.Storage: 24 months. Protect from frost.Application: brush.Consumption: 0.1-0.15 kg/m².Packaging: 10 kg drums.

Primer G ConductiveDark-coloured, solvent-free conductive synthetic resin primer in water dispersion.

10.3 Accessories, abrasive disks and products for the maintenance of parquet ____________________________


TECHNICAL DATA:Consistency: fluid paste.Colour: black.Density: 1.05 kg/dm³.pH: no.Inflammable: no.Consumption: see Technical Data Sheet.Packaging: 2.5 kg drums.

Mapelectric CP1Solvent-free conductive admix added to primers, smoothing compounds, adhesives and grouting mortars for laying ceramic floors.

85

TECHNICAL DATA:Consistency: liquid.Colour: brown.Inflammable: no.Application temperature range: from +10°C to +35°C.Sanding: 24 hours.Set to light foot traffic: 24 hours.Storage: 6 months.Application: by extrusion from the nozzle on the canister.Consumption: 1-2 ml for each hole to be injected.Packaging: 0.5 kg canisters.

Ultrabond P-R9One-component, moisture curing, expansive polyurethane adhesive used by injection, for fastening and repairing parquet elements which are not perfectly bonded to the substrate.

TECHNICAL DATA:Consistency: liquid.Colour: transparent.Inflammable: yes.Application temperature range: from +5°C to +35°C.Drying time: 24 hours.Storage: 12 months.Application: cotton rag.Consumption: 5-20 g/m².Packaging: 1 litre bottles (0.85 kg) in boxes of 12 bottles.

Cleaner LCleaning solution for pre-finished parquet.

TECHNICAL DATA:Dilution: – routine maintenance: 100 ml - 10 l of water;– floors with high volume of traffic: neat.Application: special microfiber applicator or cotton cloth.Drying time: approx. 20-30 minutes.Storage: 24 months in its original packaging.Consumption: 80-100 m² of undiluted product.Packaging: 12 x 1 litre.

Ultracoat Clean PolishSpecial product, supplied ready-to-use in dilution, developed specifically for routine maintenance work on wooden floors in residential and commercial environments treated with water-based varnishes from the ULTRACOAT range.

TECHNICAL DATA:Dilution ratio: – routine maintenance: 100 ml - 10 litres of water;– floors with high volume of traffic: neat.Application: cotton cloth or special microfiber applicator.Surface marks: undiluted product.Drying time: approx. 30 minutes at room temperature (+20°C), according to the type of substrate and amount applied.Storage: 24 months in its original packaging at +20°C.Consumption: – 80-100 m² per litre of diluted product. – Approx. 20 m² for undiluted product.Packaging: 12 x 1 litre.

Ultracoat Clean WPMReady-to-use product, supplied ready-to-use in dilution, developed specifically for routine maintenance work on wooden floors in residential and commercial environments treated with matt and extra-matt water-based varnishes from the ULTRACOAT range.

86


Ultracoat Roller FinishMedium-haired roller (4 mm) recommended for applying ULTRACOAT EASY PLUS and ULTRACOAT HIGH TRAFFIC (second and successive coats).

Ultracoat Roller CombiSpecial grip for ULTRACOAT ROLLER.

Ultracoat PadPads used for polishing and cleaning parquet floors.Packaging: boxes of 5 pads.

TECHNICAL DATA:Dilution rate: in 10 litres of hot water (+25°C): 75 to 250 ml.Application: cotton cloth or special microfiber applicator.Consumption: approx. 80-100 m² per litre.Routing cleaning: 75 ml in 10 litres of water at +25°C.Deep-down cleaning: 250 ml in 10 litres of water at +25°C.Storage: 24 months in its original packaging.Packaging: 12 x 1 litre.

Ultracoat Polish RemoverConcentrated de-waxing solution, developed specifically for removing ULTRACOAT CLEAN POLISH / ULTRACOAT CLEAN WPM from finished wooden floors. It may also be used to remove small marks from the surface of floors treated with varnishes from the ULTRACOAT range.

87

Ultracoat SRAbrasive mesh disks in silica carbide for sanding parquet floors.

Ultracoat Roller QuickAir-tight container for storing ULTRACOAT ROLLER after being used and then cleaned.Packaging: boxes of 20 pieces.

Ultracoat Roller PlusLong-haired roller (6 mm) recommended for applying undercoats of ULTRACOAT PREMIUM BASE and ULTRACOAT UNIVERSAL BASE. Thanks to its special composition and length of the fibres, the roller helps to impregnate floors perfectly.ULTRACOAT ROLLER PLUS may also be used to spread the first coats of ULTRACOAT EASY PLUS and ULTRACOAT HIGH TRAFFIC directly (without undercoat).

Ultracoat Roller OilShort-haired roller (2.5 mm) recommended for applying ULTRACOAT OIL. The special structure of the roller helps to quickly spread the product without leaving excess product on the surface so application is quicker and consumption is reduced.

88

TECHNICAL DATA:Dilution ratio: 1/2-2 dl in 10 litres of water.Application: wrung cloth or floor cleaning machine.Packaging: 12 x 1 litre.

Ultracoat Universal CleanerIs a concentrated detergent developed for cleaning varnished and oiled wooden floors. Also suitable for routine floor cleaning operations and for particularly dirty floors.


Ultracoat Steel SpatulaSpecial spatula recommended for spreading ULTRACOAT AQUA PLUS, ULTRACOAT LS and ULTRACOAT OIL. Made entirely from stainless steel, when used to apply ULTRACOAT AQUA PLUS it avoids staining the pavement due to discolouring of the high quantity of tannin in certain types of wood. Adjustable flexibility to make grouting operations easier and to guarantee correct filling of even larger joints. Its special shape with rounded corners helps to avoid the formation of streaks of material on the surface of the floor, which makes it particularly recommended for spreading on ULTRACOAT OIL and ULTRACOAT PREMIUM BASE.

PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS

92

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Colour of mix: white, grey (Ral 7001) and neutral.Application temperature range: from +5°C to +30°C.Workability time: 30-40 minutes.Setting time of film: 4-5 hours.Waiting time between first and second coat: 6-24 hours.Final hardening time: 3 days.Storage: 12 months in its original sealed packaging.Application: brush, roller or airless spray.Consumption: 400-600 g/m² per coat.Packaging: 5 kg kits (A + B): neutral and grey; 15 kg kits (A+B): neutral.

Mapecoat I 24Two-component epoxy paint for anti-acid coatings on concrete surfaces.

TECHNICAL DATA:Consistency: component A thick paste, component B fluid paste.Colour: component A white, component B transparent.Density (EN ISO 2811-1) (g/cm³): component A 1.43, component B 1.003.Dilution rate: supplied ready to use.Waiting time between each coat: 6-24 hours.Complete hardening time: 7 days.Application temperature range: from +5°C to +30°C.Cleaning: ethanol.Storage: 24 months.Application: roller, brush or spray.Consumption (kg/m²): 0.4-0.6 (per coat).Packaging: 5 kg kits (A + B).

Mapecoat DW 25Two-component epoxy paint used to form a coating for use on concrete surfaces that are in contact with drinking water and foodstuffs.

11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS

11.1 Resin based products _______________________________________________________________________

PI-MC-PR-RC-IR


PRINCIPLES


PI-MC-PR-RC-IR


PRINCIPLES


EN 1504-2

EN 1504-2

TECHNICAL DATA:Consistency of mix: fluid.Colour of mix: opaline.Mixing ratio: comp. A: comp. B = 2.3 : 3.6.Workability time: 2-3 hours.Dust dry at +23°C and 50% R.H.: 3-4 hours (first coat); 6-8 hours (second coat).Final hardening time: 7 days.Application temperature range: from +8°C to +35°C.Storage: 12 months in its original sealed packaging.Application: roller, spray or airless spray.Consumption: 300-500 g/m² according to the absorption.Packaging: 5.9 and 11.8 kg kits (A + B).

Mapecoat I 600 WTwo-component transparent epoxy primer in water dispersion.

TECHNICAL DATA:Consistency of mix: fluid.Colour of mix: opaline.Mixing ratio: comp. A: comp. B = 2.3 : 3.6.Workability time: 2-3 h.Dust dry at +23°C - 50% R.H.: – 3-4 h (first coat); – 6-8 h (second coat).Final hardening time: 7 days.Application temperature range: from +8°C to +35°C.Storage: 24 months in its original sealed packaging.Application: roller, spray or airless spray.Consumption: 300-500 g/m² according to absorption.Packaging: 5.9 kg kits (A + B).

Mapecoat I 600 W LucidoTwo-component, shiny, transparent epoxy primer in water dispersion.

93

TECHNICAL DATA:Appearance: paste.Colour: 19 different RAL colours.Dry substances content: 99 ± 1.Application temperature range: from +10°C to +30°C.Storage: 12 months in its original sealed packaging.Application: mixed with epoxy products during preparation.Consumption: 0.7 kg per kit (A+B) of PRIMER SN, MAPEFLOOR I 300 SL and MAPEFLOOR I 500 W.Packaging: 0.7 kg buckets.

Mapecolor PasteSystem for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 350 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 400, MAPEFLOOR PU 410, PRIMER SN and MAPEFLOOR DECOR 700.

N.B.: other RAL colours available upon request (minimum quantity 25 kg).

TECHNICAL DATA:Mixing ratio: comp. A: comp. B = 50:100.Colour of mix: opaline.Consistency of mix: fluid.Application temperature range: from +12°C to +30°C.Workability time: 40 minutes.Dusty dry: 3 hours.Setting time: 8-9 hours.Set to light foot traffic: 24 hours.Final hardening time: 7 days.Storage: 12 months in its original sealed packaging.Application: short-haired or medium-haired roller or airless spray system.Consumption: 0.100-0.250 kg/m² per coat according to the absorption of the substrate.Packaging: 15 kg kits (A + B).

TECHNICAL DATA:Mixing ratio: comp A : comp B = 20 : 80.Consistency of mix: fluid.Workability time: 40 min.Dust dry: 3-4 h.Touch dry: 4-5 h.Waiting time between first and second coat: 6-24 h according to temperature and level of humidity.Complete hardening time: 7 days.Storage: 12 months in its original packaging in a dry area away from sources of heat at a temperature of between +5°C and +30°C.Consumption: approximately 0.25 kg/m² per coat. Consumption depends on the characteristics of the substrate on which the product is applied and the application method used, and may increase if the surface on which it is applied is uneven.Packaging: 15 kg kits (A + B).

Mapecoat I 620 WTwo-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems.

Mapecoat I 650 WTTwo-component epoxy paint in water dispersion with a ceramic-effect finish and low dirt-retaining surface for finishing off support walls in tunnels.

TECHNICAL DATA:Colour: yellowish white.Appearance: creamy.Density (g/cm³): 0.9.Dry substances content (%): 80.Flash point (ISO 3679): +64°C.Storage: 12 months in its original sealed packaging.Application: squeegee, (airless) spray system, brush or roller.Consumption: 0.1-0.4 kg/m² according to the level of absorption of the concrete.Packaging: 25 kg drums.

Mapecrete Creme ProtectionSolvent-free, silane-based, thixotropic water repellent in watery dispersion, ideal for hydrophobic treatments on concrete.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

NEW

94


TECHNICAL DATA:Mixing ratio: A/B/C = 3.2/3.2/25.Colour of mix: grey, beige, ochre, red and green.Consistency of mix: thick.Pot life of mix at +20°C: 25 minutes.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 8 hours.Final hardening time: 4 days.Compressive strength: 65 N/mm².Flexural strength: 16 N/mm².Storage: 12 months in its original sealed packaging.Application: smooth trowel.Consumption: 1.9 kg/m² per mm of thickness.Packaging: 31.4 kg kits (A+B+C).

Mapefloor CPU/HDThree-component, high-strength polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 6 to 9 mm.

TECHNICAL DATA:Colour of mix: transparent.Consistency of mix: fluid.Workability time: 70 minutes.Complete Set to light foot traffic time: 48 hours.Application temperature range: from +8°C to +30°C.Binder/inert consumption: 1:20.Compressive strength after 7 days at +23°C (EN 196-1): 12.47 N/mm².Flexural strength after 7 days at +23°C (EN 196-1): 5.19 N/mm².Storage: 12 months in its original sealed packaging.Application: rake, straight-edge, smooth trowel and mechanical vibro-compactor.Consumption: 1.0 kg/m² per cm of thickness.Packaging: 5 kg drums.

Mapefloor Binder 930One-component, aliphatic polyurethane binder for decorative open-pore floors made with natural aggregates.

TECHNICAL DATA:Application temperature range: from +10°C to +30°C.Absorption by immersion in oil (%): 0.32.Capillary absorption EN 13057 (kg/m²∙h0.5): 0.25.Storage: 12 months in its original sealed packaging.Application: by spray, airless spray or brush.Consumption: 0.1-0.3 kg/m² according to the level of porosity of the concrete.Packaging: 25 kg tanks.

Mapecrete Stain ProtectionHydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in a watery solution.

TECHNICAL DATA:Application temperature range: from +5°C to +40°C.Minimum waiting time for the product to penetrate: 30 min.Loss of material with Taber abrasion test ISO 5940 (mg): 35.Capillary absorption EN 13057 (kg/m²∙h0.5): 1.3.Storage: 12 months in its original sealed packaging.Application: by spray with a low pressure pump.Consumption: 0.2-0.4 kg/m² according to the level of porosity of the concrete.Packaging: 25 kg tanks.

Mapecrete LI HardenerSurface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete with a dry shake finishing treatment.

95

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 100 : 3.33.Colour of mix: transparent.Consistency of mix: fluid.Bucholz hardness (after 7 days at +23°C): 90.Dust dry (at +23°C and 50% R.H.): 6 hours.Set to light foot traffic (at +23°C and 50% R.H.): 24 hours.Final hardening time: 7 days.Taber Test (after 7 days at +23°C and 50% R.H., CS17 disk, 1000 cycles, 1000 g): 20 mg.Storage: 12 months in its original sealed packaging.Application: short-haired roller, such as mohair.Consumption: 0.1-0.2 kg/m² per coat according to absorption.Packaging: 5 kg kits (A + B).

Mapefloor Finish 50Two-component, moisture curing, aliphatic transparent polyurethane finishing product.

TECHNICAL DATA:Mixing ratio: A/B/C = 7.5/2.5/90.Consistency of mix: damp sand.Application temperature range: from +5°C to +30°C.Workability time: from 30 to 40 minutes.Set to light foot traffic: 6 hours.Ready for use: 12 hours.Resistance to temperatures: from -20°C to +120°C.Resistance to ageing: excellent.Resistance to oils: excellent.Resistance to acids and alkalis: excellent.Compressive strength after 7 days: (EN 196/1): 50 N/mm².Flexural strength after 7 days: (EN 196/1): 20 N/mm².Taber abrasion resistance after 7 days (H22 disk - 1000 g - 1000 revs): 1.1 g.Storage: 24 months in its original sealed packaging.Application: trowel and smooth metal trowel.Consumption: 20 kg/m² per cm of thickness;Packaging: 10 kg kits.

Mapefloor EP19Three-component acid and wear-resistant epoxy mortar for floors.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 1 : 4.Colour of mix: cream.Consistency of mix: paste.Dust dry at +23°C and 50% R.H.: 2 hours.Set to light foot traffic at +23°C and 50% R.H.: 12 hours.Final hardening time: 7 days.Compressive strength after 7 days: (DIN EN 196): 70 N/mm².Flexural strength after 7 days: (DIN 1048): 30 N/mm².Modulus of elasticity (DIN 1048): 15000 N/mm².Taber abrasion resistance after 7 days (CS17 disk - 1000 g - 1000 revs): 50 mg.Storage: 24 months in its original sealed packaging.Application: smooth trowel.Consumption: from 1 to 1.5 kg/m² per coat according to the characteristics of the substrate and type of decorative finish required.Packaging: 10 kg kits (A + B).

Mapefloor Decor 700Two-component, solvent-free epoxy paste in water dispersion to create floors with a trowel-effect or mottled finish.May be coloured with MAPECOLOR PASTE.

B2,0AR0,5-IR20-Bfl-s1

SRSYNTHETIC

RESINS

EN 13813



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

TECHNICAL DATA:Mixing ratio: A/B/C = 4.2/4.2/20.Colour of mix: grey, beige, ochre, red and green.Consistency of mix: thick fluid.Pot life of mix at +20°C: 15 minutes.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 24 hours.Final hardening time: 4 days.Compressive strength: 60 N/mm².Flexural strength: 21 N/mm².Storage: 12 months in its original sealed packaging.Application: smooth trowel or rake with spacers.Consumption: 6 kg/m² for self-levelling coats (3 mm thick).Packaging: 28.4 kg kits (A + B + C).

Mapefloor CPU/MFThree-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 4 mm.

96


TECHNICAL DATA:Mixing ratio: comp A : comp B = 5.1 : 4.Colour of mix: Ral 7032 - Ral 1015 - Ral 7046 - Ral 7000 - Ral 7001 - Neutral.Consistency of mix: fluid paste.Density of mix (kg/m³): 1,250.Viscosity of mix (mPa·s): 1,200 ± 200.Pot life at +23°C: 1 h.Dust dry at +23°C: 7-8 h.Application temperature range: from +5°C to +30°C.Set to foot traffic at +23°C: 24 h.Final hardening time at +23°C: 3 days.Maximum deformation after 7 days at +23°C + 14 days at +50°C (%): 120.Tear strength after 7 days at +23°C + 14 days at +50°C (N/mm): 21.5.Taber abrasion resistance (CS 10 disk - 1,000 g - 1,000 revs) after 7 days at +23°C (mg): 35 ± 5.Storage: 6 months in its original sealed packaging.Application: roller or airless spray system.Theoretical consumption: 0.15-0.35 kg/m².Packaging: 8 and 9.1 kg kits (A+B).

Mapefloor Finish 55Two-component, aliphatic, highly-flexible polyurethane finish resistant to wear and UV rays.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 10 : 1.Colour of mix: transparent.Consistency of mix: fluid.Workability time: 15-20 minutes at +23°C.Varnishing: from 3 to 5 hours.Sanding: after 12 hours.Set to the touch: 40 minutes.Dust dry at +23°C and 50% R.H.: 40 minutes.Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours.Final hardening time: 12 hours at +23°C.Gloss: 50.Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 22 mg.Storage: 12 months in its original sealed packaging.Application: short-haired roller such as mohair or airless spray system.Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating material.Packaging: 11 litre units.

Mapefloor Finish 54 W/STwo-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems.

EN 13813

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 10 : 1.Colour of mix: transparent.Consistency of mix: fluid.Workability time: 15-20 minutes at +23°C.Varnishing: from 3 to 5 hours.Sanding: after 12 hours.Set to the touch: 40 minutes.Dust dry at +23°C and 50% R.H.: 40 minutes.Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours.Final hardening time: 12 hours at +23°C.Gloss: 80.Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 22 mg.Storage: 12 months in its original sealed packaging.Application: short-haired roller such as mohair or airless spray system.Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating material.Packaging: 11 litre units.

Mapefloor Finish 53 W/LTwo-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 87 : 13.Colour of mix: opaline.Consistency of mix: fluid.Workability time: 30 minutes.Dust dry (at +23°C and 50% R.H.): 20-35 minutes.Set to light foot traffic (at +23°C and 50% R.H.): 12 hours.Final hardening time: 7 days.Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 50 mg.Bucholz hardness (after 7 days): 71.Storage: 12 months in its original sealed packaging.Application: short-haired roller such as mohair, by spray or airless spray system.Consumption: 0.1-0.2 kg/m² per coat according to the absorption of the substrate.Packaging: 5.4 kg kits (A + B).

Mapefloor Finish 52 WTwo-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments.

EN 13813



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

97

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 100 : 22.Colour of mix: light grey, dark grey, light blue, dark blue and red.Consistency of mix: fluid.Compressive strength after 7 days at +23°C (DIN EN 196-1): 52 N/mm².Flexural strength after 7 days at +23°C (DIN EN 196-1): 31 N/mm².Surface hardness (shore D): 75.Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 80 mg.Storage: 12 months in its original sealed packaging.Application: smooth trowel.Consumption: 3 kg/m².Packaging: 16.8 kg kits (A + B).

Mapefloor I 320 SL CONCEPTSelf-levelling epoxy coating with a coloured granular finish for abrasion-resistant floors.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 100 : 50.Colour of mix: transparent.Consistency of mix: fluid.Pot life of mix: approx. 30 minutes.Dust dry at +23°C and 50% R.H.: 6 hours.Set to light foot traffic at +23°C and 50% R.H.: 24 hours.Final hardening time: 7 days.Compressive strength (ASTM D 695): 55 N/mm².Flexural strength (ISO 178): 25 N/mm².Surface hardness (shore D): 80.Taber Test CS17 disk, 1000 cycles, 1000 g (DIN 52108): 80 mg.Storage: 12 months in its original sealed packaging.Application: N° 7 notched trowel.Consumption: 1-1.5 kg/m².Packaging: 18 kg kits (A + B).

Mapefloor I 300 SL TRPTwo-component, transparent, non-yellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Colour of mix: neutral.Consistency of mix: thick fluid.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 24 hours.Final hardening time: 7 days.Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg.Storage: 24 months in its original sealed packaging.Application: by roller or flat or notched trowel.Consumption: – 2.0 kg/m² for 2 mm thick self-levelling coatings on

substrates primed with PRIMER SN;– 0.9 kg/m² for intermediate layers in 3 mm thick non-slip

coatings on substrates primed with PRIMER SN;– 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick

non-slip coatings on substrates primed with PRIMER SN.Packaging: 8 and 20 kg kits (A + B).

Mapefloor I 300 SLTwo-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick.May be coloured with MAPECOLOR PASTE.


SRSYNTHETIC

RESINS

EN 13813

B2,0AR0,5-IR20-Cfl-s1

SRSYNTHETIC

RESINS

TECHNICAL DATA:Mixing ratio: comp. A: comp. B: = 10 : 0.15.Colour of mix: transparent, milky.Consistency of mix: fluid.Dry substances content (3 h - 105°C) (%): 23.Density of mix (kg/m³): 1,028.Viscosity of mix (mPa·s): 25 (# 1 - 100 rpm).Workability time: 60 min.Surface temperature: from +12°C to +30°C.Varnishing: after 6-8 h at +23°C.Dust dry at +23°C and 50% R.H.: 2 h.Abrasion resistance (Taber abrasimeter) (CS 17 disk - 500 revs - 1,000 g) after 7 days (mg): 65.Set to light foot traffic at +23°C and 50% R.H.: 24 h.Final hardening time: 4 days.Storage: 12 months in its original sealed packaging.Application: short-haired roller such as mohair or a suitable airless spray system.Consumption: 0.15-0.2 kg/m² according to the grade of porosity and absorption of the substrate.Packaging: 10, 150 kg kits (A + B).

Mapefloor Finish 630Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors.

EN 13813

98


TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 100 : 50.Colour of mix: transparent amber.Consistency of mix: thick fluid.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 12 hours.Final hardening time: 7 days.Storage: 12 months in its original sealed packaging.Application: – for priming: roller or smooth trowel;– for mortar: rake and aluminium straight edge.Consumption: – for priming: 0.3-0.5 kg/m² according to the absorption

of the substrate.– for mortar: according to the thickness to be applied.Packaging: 15 kg kits (A + B).

Mapefloor I 910Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings.

TECHNICAL DATA:Mixing ratio: comp. A: comp. B = 50 : 100.Colour of mix: transparent amber.Consistency of mix: thick fluid.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 12 hours.Final hardening time: 7 days.Storage: 12 months in its original sealed packaging.Application: – as bonding promoter: roller or smooth trowel;– for mortar: rake and aluminium straight edge.Consumption: – as bonding promoter: 0.5-0.7 kg/m²;– for mortar: recommended ratio for mortar: 1 kg of

MAPEFLOOR I 900 ( A+B ) per 8-13 kg of QUARTZ 1.9, consumption depends on the thickness to be applied.

Packaging: 15 kg kits (A + B).

Mapefloor I 900Two-component epoxy binder used for preparing trowelled mortar with a consistency similar to a mortar screed for industrial floors.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 1 : 12.Colour of mix: neutral.Consistency of mix: thick fluid.Pot life of mix at +20°C: 20 minutes.Dust dry at +23°C and 50% R.H.: 3-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 16 hours.Final hardening time: 7 days.Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 110 mg.Storage: 12 months in its original sealed packaging.Application: notched or smooth trowel or notched rake.Consumption: – for 2 mm thick smooth self-levelling coatings on substrates primed

with MAPECOAT I 600 W: 4 kg/m²;– for 5 mm thick, multi-layered non-slip systems:

as first layer: MAPEFLOOR I 500 W 2-2.5 kg/m²; QUARTZ 0.5 5 kg/m²; as second layer: MAPEFLOOR I 500 W 2-2.5 kg/m²; QUARTZ 0.5 5 kg/m²; as finishing layer: MAPEFLOOR I 500 W 0.5-0.7 kg/m²


Mapefloor I 500 WTwo-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors.May be coloured with MAPECOLOR PASTE.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 75 : 25.Colour of mix: neutral.Consistency of mix: thick fluid.Pot life of mix at +20°C: 35 minutes.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 24 hours.Final hardening time: 7 days.Taber Test after 7 days, CS17 disk, 1000 cycles, 1000 g, at +23°C - 50% R.H.: 70 mg.Storage: 12 months in its original sealed packaging.Application: by roller or flat or notched trowel.Consumption: – for 2 mm thick self-levelling coatings on substrates primed

with PRIMER SN: 2.0 kg/m²;– for intermediate layers in 3 mm thick, multi-layer, non-slip

coatings on substrates primed with PRIMER SN: 0.9 kg/m²;– for finishing layers in 1 mm and 3 mm thick multi-layer,

non-slip coatings on substrates primed with PRIMER SN: 0.6 kg/m².


Mapefloor I 350 SLTwo-component, multi-purpose, neutral-coloured epoxy formulate, with “class 1” and Euro-class “Bfl - s1” fire resistance for industrial floor coatings up to 4 mm thick.May be coloured with MAPECOLOR PASTE.


SRSYNTHETIC

RESINS

EN 13813


SRSYNTHETIC

RESINS

EN 13813

99

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 81 : 19.Colour of mix: neutral.Consistency of mix: fluid.Pot life at +20°C: 41 minutes.Dusty dry: 2-4 hours.Set to light foot traffic: 24 hours.Final hardening time: 7 days.Elongation (DIN 53504): approx. 180%.Shore A hardness after 28 days: 89.Storage: 6 months in its original sealed packaging.Application: smooth or notched trowel.Consumption:1. As an intermediate layer in the MAPEFLOOR PARKING SYSTEM:

MAPEFLOOR PU 410 + MAPECOLOR PASTE: 1.0 kg/m² with QUARTZ 0.25: 0.3 kg/m²; sprinkling of quartz 0.1-0.5 mm: 4.0 kg/m².

2. As a multi-layered, flexible, non-slip coating layer (1.5-3 mm): MAPEFLOOR PU 410 + MAPECOLOR PASTE: 0.9 kg/m² with QUARTZ 0.5: 0.27 kg/m²; sprinkling of quartz 0.1-0.5 mm on fresh product: 3.0 kg/m².

3. As a flexible, self-levelling layer (2-3 mm): MAPEFLOOR PU 410 + MAPECOLOR PASTE + QUARTZ 0.25: 4.0 kg/m².

Packaging: 19.2 kg kits (A + B).

Mapefloor PU 410Two-component, self-levelling, neutral-coloured, flexible polyurethane fillerized binder.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 24 : 76.Colour of mix: neutral.Consistency of mix: thick fluid.Pot life at +23°C: 59 minutes.Dusty dry: 4-6 hours.Set to light foot traffic: 24 hours.Final hardening time: 7 days.Elongation (DIN 53504): approx. 470%.Shore A hardness after 28 days: 70.Storage: 6 months in its original sealed packaging.Application: notched trowel.Consumption: from 1.5 to 2 kg/m² according to the condition of the substrate.Packaging: 19.75 kg kits (A + B).

Mapefloor PU 400Two-component, self-levelling, neutral-coloured, highly flexible polyurethane binder with fillers.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Colour of mix: amber yellow.Consistency of mix: fluid.Density of the mix: 1080 kg/m³.Pot life at +23°C: approximately 30 minutes.Dust dry at +23°C and 50% R.H.: 3-4 hours.Set to light foot traffic at +23°C: 12 hours.Final hardening time: 7 days.Pull-out after 7 days at +23°C - 50% R.H.: > 2.5 N/mm² (failure of concrete).Pull-out on damp surfaces after 7 days at +23°C - 50% R.H.: 2.4 N/mm² (failure of concrete).Storage: 24 months in its original sealed packaging.Application: rubber trowel, roller or brush.Consumption: 300 g/m² (according to the absorption of the substrate).Packaging: 28 kg metal drums (comp. A : 21 kg - comp. B : 7 kg).

Mapefloor I 914Two-component epoxy primer for waterproofing concrete bridges before applying bitumen systems.

TECHNICAL DATA:Mixing ratio: comp. A : comp B = 100 : 30.Colour of mix: white.Consistency of mix: liquid.Dry substances content (%): 70.Density of mix (kg/m³): 1,100.Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm).Workability time: 15-20 minutes at +20°C.Surface temperature: at least +10°C.Pot life: 6 h at +20°C.Varnishing: after 6-8 h at +20°C.Dusty dry: after 2 h at +20°C.Final hardening time: 24 h.Storage: 6 months in its original sealed packaging.Application: by brush, roller or airless spray system.Consumption: 0.2 kg/m².Packaging: 5 kg kits (A + B).

Primer ER RustopTwo-component epoxy primer for metal surfaces.

100


TECHNICAL DATA:Mixing ratio: component A : component B = 80 : 20.Colour of mix: neutral.Consistency of the mix: dense fluid.Density of mix (kg/m³): 1500.Viscosity of the mix (mPa·s): 1,200.Pot life: 30 min.Application temperature range: from +8°C to +35°C.Dust dry at +23°C and 50% R.H.: 2-4 hours.Set to light foot traffic at +23°C and 50% R.H.: 12 hours.Final setting time: 7 days.Application: flat American trowel or smooth trowel.Consumption: 0.3-0.6 kg/m² per coat, depending on the absorbency and characteristics of the substrate.Packaging: 20 kg units:– component A = 16 kg;– component B = 4 kg.

Primer SNTwo-component epoxy primer with fillers.May be coloured with MAPECOLOR PASTE.

TECHNICAL DATA:Colour: white, beige, light grey, red, anthracite and standard.Mixing ratio: 20-22 parts of water per 100 parts by weight of ULTRATOP.Applicable thickness: from 5 to 40 mm.Self-levelling: yes.Workability time: 15 minutes.Setting time: 60 minutes.Set to light foot traffic: 3-4 hours.Compressive strength after 28 days at +23°C: ≥ 40 N/mm².Flexural strength after 28 days at +23°C: ≥ 11 N/mm².Böhme abrasion resistance after 28 days at +23°C: 9 cm³/50 cm².Storage: 12 months in its original sealed packaging.EMICODE: EC1 R - very low emission.Application: by hand or mortar pump.Consumption: 16.5-17.5 kg/m² per cm of thickness.Packaging: 25 kg bags.

UltratopSelf-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.

TECHNICAL DATA:Appearance: rounded coloured granules in assorted sizes from 4 to 15 mm.Colour: white, yellow, orange, red, brown, green and blue.Density of granules according to UNI EN 1097-6:2002: 2.34 g/cm³.Water absorption according to UNI EN 1097-6:2002: 4.5.Wear resistance according to UNI EN 1097-1 2004 (Micro Deval): 13.Compressive strength according to UNI EN 1015-11:2001: >100 N/mm².Storage: 24 months in its original sealed packaging.Application: loose or mixed with ULTRATOP.Consumption: mixed with ULTRATOP: 10 kg/m² per cm of thickness.Packaging: 25 kg bags.

Dynastone ColorColoured cementitious aggregates for decorating cementitious floors and urban architectural features.

11.2 Cementitious based products _________________________________________________________________

C40-F10CEMENTITIOUS

SCREED

A9-A2 -s1fl

C70-F7A6-A1fl

CEMENTITIOUSSCREED

EN 13813

EN 13813

TECHNICAL DATA:Colour of mix: light grey, anthracite, light green, brown and red.Density of mix (kg/m³): 2,200.pH of mix: >12.5.Application temperature range: from +5°C to +35°C.Compressive strength EN 13892/2 (N/mm²): 40 (after 1 day); 70 (after 28 days).Flexural strength EN 13892/2 (N/mm²): 7 (after 1 day) 9 (after 28 days).Bond strength on concrete (substrate in MC 0.40 - water/cement ratio = 0.40) according to EN 1766 (N/mm²): ≥ 2 (after 28 days).Impermeability to water - penetration depth - EN 12390/8 (mm): < 5.Coefficient of capillary absorption EN 1062/3 (kg/m²·h0.5): < 0.1.Böhme abrasion resistance EN 13892/3: Class 6.Reaction to fire EN 13501: Euroclass A1.Storage: 12 months in its original sealed packaging.Application: by sprinkling.Consumption:– manual application: from 1.5 to 2.5 kg/m² per coat;– mechanical application: from 3 to 5 kg/m².Packaging: 25 kg bags.

Mapetop N AR6Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives.

101

TECHNICAL DATA:Consumption: 2-3% of the total weight of the epoxy binder used (A+B).Packaging: 5 kg drums.

Epoxy SpeedSolvent-free accelerator for epoxy primers.

TECHNICAL DATA:Appearance: powder.Colour: white.Density: 960 kg/m².Consumption: 2-5% by weight on the weight of the resin.Packaging: 1 kg drums.

Additix PEAdmixture to make epoxy and polyurethane products thicker with a thixotropic consistency.

TECHNICAL DATA:Colour: white, beige, light grey, red, anthracite and standard.Application: rubber trowel.Consumption: according to the micro-porosity.Packaging: 5 kg drums.

Ultratop StuccoGrout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP.

TECHNICAL DATA:Colour: white, light grey, anthracite and natural.Mixing ratio: 19-21 parts of water per 100 parts by weight of ULTRATOP LIVING.Applicable thickness: from 5 to 15 mm.Self-levelling: yes.Workability time: 15 minutes.Setting time: 60-80 minutes.Set to light foot traffic: 3-4 hours.Compressive strength after 28 days at +23°C: ≥ 32 N/mm².Flexural strength after 28 days at +23°C: ≥ 9 N/mm².Böhme abrasion resistance after 28 days at +23°C: 11 cm³/50 cm².Storage: 12 months in its original sealed packaging.EMICODE: EC1 R - very low emission.Application: by hand or mortar pump.Consumption: 16.5-17.5 kg/m² per cm of thickness.Packaging: 25 kg bags.

Ultratop LivingSelf-levelling, ultra-quick setting mortar with special hydraulic binders, applied at a thickness between 5 and 15 mm to create abrasion-resistant internal floors

11.3 Complementary products for resin and cementitious floors _________________________________________

C30-F7A12-A2fl-s1

CEMENTITIOUSSCREED

EN 13813

102


TECHNICAL DATA:Appearance: liquid.Colour: pink.Solubility in water: soluble.Solubility in oil: insoluble.Storage: 12 months in its original sealed packaging.

Mapefloor Wax RemoverDe-waxing, multi-action detergent for removing all types of metallic wax including the double-reticulation type, such as MAPELUX LUCIDA or MAPELUX OPACA.

TECHNICAL DATA:Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost.Packaging: MAPEFLOOR KIT MANUTENZIONE is made up of the following products:– MAPELUX LUCIDA: 1x5 kg;– MAPEFLOOR WAX REMOVER: 1x5 kg;– MAPEFLOOR CLEANER ED: 2x5 kg.

Mapefloor Maintenance KitA series of products for cleaning and periodic maintenance of floors to guarantee their performance characteristics and attractive finish.

TECHNICAL DATA:Consumption: 5-10 g/m².Packaging: 0.3 kg drums.

Mapefloor FillerCalibrated fillers added to MAPEFLOOR FINISH 50, MAPEFLOOR FINISH 52 W, MAPEFLOOR FINISH 53 W/L, MAPEFLOOR FINISH 54 W/S and MAPECOAT I 620 W to form a non-slip finish.

TECHNICAL DATA:Appearance: opaque liquid.Colour: green.Solubility in water: soluble.Storage: 12 months in its original sealed packaging.Application: by hand or rendering machine:Packaging: 10 kg drums.

Mapefloor Cleaner EDDetergent for normal degreasing operations of floors.

103

TECHNICAL DATA:Colour: light grey.Maximum size of inerts: 0.5 mm.

Quartz 0.5Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems.



TECHNICAL DATA:Appearance: emulsion.Colour: bluish-white.Application temperature range: from +10°C to +30°C.pH: 8.4 ± 0.2.Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost.Application: special wax spreader.Consumption: 50 g/m².Packaging: 10 kg drums.

Mapelux OpacaDouble-reticulating, high-strength matte metallic wax.

TECHNICAL DATA:Appearance: emulsion.Colour: bluish-white.Application temperature range: from +10°C to +30°C.pH: 8.4 ± 0.2.Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost.Application: special wax spreader.Consumption: 50 g/m².Packaging: 10 kg drums.

Mapelux LucidaDouble-reticulation, high-strength shiny metallic wax.

104


TECHNICAL DATA:Weight: 350 g/m².Mesh size: 15.7 x 10.1 mm.Packaging: 50 x 1 m rolls

Rete 320Glass fibre mesh for reinforcing epoxy systems.

TECHNICAL DATA:Colour: light grey.Maximum size of inerts: 1.9 mm.Consumption: recommended ratio for mortar: 10-13 kg of QUARTZ 1.9 per kg of MAPEFLOOR I 900 (A+B).

Quartz 1.9Mixture of calibrated spherical quartz used as a filler in MAPEFLOOR I 900 for preparing mortar with a consistency similar to a mortar screed.



PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE

108

12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE

TECHNICAL DATA:Maximum size of aggregate: 8 mm.Minimum applicable thickness: 20 mm.Maximum applicable thickness: 70 mm.Step-on time: immediate.Application temperature range: from 0°C to +35°C.Final hardening time: approximately 1 hour (at +20°C).Storage: 9 months.Application: trowel, spatula, rake or shovel.Consumption: approximately 23 kg/m² per centimetre of thickness.Packaging: 14 kg Alu-pack bags.

Mape-Asphalt Repair 0/8One-component, ready-to-use reactive asphalt, applied cold, for repairing holes in roads.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water.Pot life of mix: 15 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Colour: grey and black.Application: pouring into formwork.Consumption: 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SVQuick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place.


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT HI-FLOW TI 20 with 14-16 parts of water and 0.25% of MAPECURE SRA.Pot life of mix: approximately 1 hour (at 20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout Hi-Flow TI 20Flowable shrinkage-compensated, fibre-reinforced, high-ductility cementitious mortar, with stiff steel fibres for repairing concrete.


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water.Pot life of mix: approximately 20 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SV FiberHi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing concrete.

Polvere + Fibre

Powder + Fibers


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

Polvere + Fibre

Powder + Fibers

109

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV T with 12.5-13.5 parts of water.Pot life of mix: 10 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Colour: black.Application: gauging trowel or trowel.Consumption: 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SV TQuick-setting and hardening, compensated-shrinkage thixotropic mortar for repairing concrete and fixing drains, manholes and urban fittings in place.


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS

112

13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS

Mape-Antique F21Super-fluid, salt-resistant, fillerized, hydraulic binder, based on lime and ECO-POZZOLAN, for making injection slurries for consolidating masonry and render, including the frescoed one.

TECHNICAL DATA:Maximum diameter of aggregate: 100 µm.Mixing ratio: 100 parts of MAPE-ANTIQUE F21 with approx. 60 parts of water (10.2 l of water for each 17 kg bag of product).Workability time of fresh mortar: approx. 40 minutes.Fluidity of the mixture: < 30 sec. Sulphate resistance: high.Saline efflorescence: absent.Storage: 12 months.Application: injection.Consumption: approx. 1.04 kg/dm³ (of cavities to be filled).Packaging: 17 kg bags.

TECHNICAL DATA:Maximum diameter of aggregate: 100 µm.Mixing ratio: 100 parts of MAPE-ANTIQUE I with 35 parts of water (7 l of water for each 20 kg bag of product).Workability time of fresh mortar: 60 minutes.Fluidity of the mixture: < 30 sec.Sulphate resistance: high.Saline efflorescence: absent.Storage: 12 months.Application: injection.Consumption: approx. 1.40 kg/dm³ (of cavities to be filled).Packaging: 20 kg bags.

Mape-Antique ISuper-fluid, salt-resistant, fillerized, hydraulic binder, based on lime and ECO-POZZOLAN, for making injection slurries for consolidating masonry.

TECHNICAL DATA:Dry solids content: 3%.Storage: 12 months.Application: brush, roller or spray.Consumption: 0.1-1.0 kg/m² (according to the type of substrate and depth to be consolidated).Packaging: 10 kg metal drums.

Consolidante 8020Reversible consolidator in solvent for the conservative restoration of porous stone substrates, lime render and layers of paint.

TECHNICAL DATA:Dry solids content: 15%.Storage: 12 months.Application: brush, roller or watering can.Consumption: 0.1-0.5 kg/m² (according to the absorption and porosity of the surface to be treated).Packaging: 5 and 10 kg canisters.

Primer 3296Consolidating and anti-dust acrylic primer in water dispersion.

13.1 Consolidating masonry and render by injecting slurry _____________________________________________

13.2 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, tuff, installation mortar, render, etc.) by impregnating _____________________________________________

113

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE CC with 14-16 parts of water (3.5-4 l of water for each 25 kg bag of product).Porosity of the mix while still fresh: > 20%.Coefficient of permeability to water vapour: ≤ 10 µ.Workability time of fresh mortar approx. 1 hour.Minimum applicable thickness: 20 mm.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type R mortar, category CS II.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Colour: light pink.Application: gauging trowel.Consumption: 15 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique CCMacroporous, salt-resistant dehumidifying render, based on lime and ECO-POZZOLAN, for restoring old masonry, including on buildings of historical interest.

TECHNICAL DATA:Mixing ratio:– 0.5-2.5 mm sand: 500 kg/m³ of MAPE-ANTIQUE LC

with 1,000 kg/m³ of sand and 225 l/m³ of water;– 0.5-5 mm sand: 450 kg/m³ of MAPE-ANTIQUE LC

with 1,150 kg/m³ of gravel and 210 l/m³ of water;– 0-8 mm sand: 400 kg/m³ of MAPE-ANTIQUE LC

with 1,300 kg/m³ of gravel and 200 l/m³ of water;Storage: 12 months.Application: trowel or by pouring.Consumption: approximate (per cm of thickness):– 5.0 kg/m² with fine sand (0.5-2.5 mm);– 4.5 kg/m² with coarse sand (0.5-5 mm);– 4.0 kg/m² with gravel (0-8 mm).Packaging: 20 kg bags.

Mape-Antique LCSalt-resistant, hydraulic binder based on lime and ECO-POZZOLAN, to be mixed with aggregates in various grain sizes to make dehumidifying renders and masonry mortars.

13.4 Dehumidifying masonry with binders and mortars for render _______________________________________



R-CS IIEN 998-1

EN 998-1

TECHNICAL DATA:Dimension of particles: 20-60 nm.Mixing ratio in water: 1 : 15-19.Silane/siloxane content: 100%.Duration of solution: 24 hours.Storage: 12 months.Application: by gravity or suitable injection pump.Consumption: according to the absorption of the masonry. Approximately 8-9 kg/m of solution for a 40 cm thick wall, corresponding to 0.4-0.6 kg of MAPESTOP.Packaging: 1 kg metal can with spout.

MapestopAgent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry.

13.3 Horizontal chemical barrier against capillary rising damp ___________________________________________

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE MC with 14-16 parts of water (3.5-4 l of water for each 25 kg bag of product).Porosity of the mix while still fresh: > 20%.Coefficient of permeability to water vapour: ≤ 10 µ.Workability time of fresh mortar approx. 60 minutes.Minimum applicable thickness: 20 mm.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type R mortar, category CS II.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Colour: white.Application: gauging trowel.Consumption: 15 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique MCMacroporous, salt-resistant dehumidifying render, based on lime and ECO-POZZOLAN, for restoring old masonry, including on buildings of historical interest.



R-CS IIEN 998-1

EN 998-1

114


TECHNICAL DATA:Maximum diameter of aggregate: 1 mm.Mixing ratio: 100 parts of POROMAP INTONACO MACCHINA with approx. 21 parts of water.Porosity of the mortar while still fresh: > 20%.Coefficient of permeability to water vapour: ≤ 13 µ.Workability time of mortar: approx. 60 minutes.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type R mortar, category CS II.Storage: 12 months.Application: continuous-mixing rendering machine.Consumption: 11.5-13 kg/m² (per cm of thickness).Packaging: 20 kg bags.

PoroMap Intonaco MacchinaPre-blended, salt-resistant dehumidifying and insulating mortar for repairing damp stone, brick and tuff walls; applied using a rendering machine.

TECHNICAL DATA:Maximum diameter of aggregate: 1 mm.Mixing ratio: 100 parts of POROMAP INTONACO with 20-22 parts of water.Porosity of the mortar while still fresh: > 25%.Coefficient of permeability to water vapour: ≤ 10 µ.Workability time of mortar approx. 60 minutes.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type R mortar, category CS II.Storage: 12 months.Application: gauging trowel.Consumption: 10-11.5 kg/m² (per cm of thickness).Packaging: 20 kg bags.

PoroMap IntonacoPre-blended, salt-resistant dehumidifying and insulating mortar for repairing damp stone, brick and tuff walls, applied by hand.

TECHNICAL DATA:Maximum size of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE MC MACCHINA with 19-21 parts of water (4.75-5.25 litres of water per 25 kg bag of product).Porosity of the mortar while still fresh: >20%.Coefficient of permeability to water vapour: ≤ 10 μ.Workability time of fresh mortar: approx. 60 min.Minimum applicable thickness: 20 mm.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type R mortar, category CS II.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Colours: white.Application: continuous-mixing rendering machine.Consumption: 16 kg/m² (per cm of thickness).Packaging: 25 kg bags.

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE RINZAFFO with 25-27.5 parts of water (5-5.5 l of water for each 20 kg bag of product).Porosity of the mix while still fresh: 6%.Coefficient of permeability to water vapour: ≤ 30 µ.Workability time of fresh mortar approx. 1 hour.Maximum applicable thickness: 5 mm.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Application: continuous-mixing rendering machine or gauging trowel.Consumption: 7.5 kg/m² (for a 5 mm thick layer).Packaging: 20 kg bags.

Mape-Antique MC MacchinaMacroporous, salt-resistant dehumidifying render, based on lime and ECO-POZZOLAN, for restoring old masonry, including on buildings of historical interest.

Mape-Antique RinzaffoSalt-resistant, transpirant scratch-coat mortar, based on lime and ECO-POZZOLAN, used as first layer when applying dehumidifying, transpirant and “structural” renders.



R-CS IIEN 998-1

EN 998-1



R-CS IIEN 998-1

EN 998-1



GP-CS IIEN 998-1



GP-CS IVEN 998-1

EN 998-1

EN 998-1

NEW

115

TECHNICAL DATA:Maximum diameter of aggregate: 1.4 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE INTONACO NHL with 19-21 parts of water (4.75-5.25 l of water for each 25 kg bag of product).Porosity of the mortar while still fresh: 20%.Coefficient of permeability to water vapour: ≤ 12 µ.Workability time of fresh mortar: approx. 60 minutes.Minimum applicable thickness: 10 mm.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-1 - type GP mortar, category CS II.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: continuous-mixing rendering machine or gauging trowel.Consumption: approx. 14.5 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique Intonaco NHLTranspirant base render based on natural hydraulic lime and ECO-POZZOLAN, for application on existing masonry, including that of historical interest, and on new construction.

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of POROMAP RINZAFFO MACCHINA with approx. 18 parts of water.Coefficient of permeability to water vapour: < 20 µ.Workability time of mortar approx. 60 minutes.Maximum applicable thickness: 5 mm.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Application: continuous-mixing rendering machine.Consumption: 7.5-8 kg/m² (for a 5 mm thick layer).Packaging: 25 kg bags.

PoroMap Rinzaffo MacchinaPre-blended, salt-resistant mortar applied using a rendering machine before applying POROMAP INTONACO MACCHINA dehumidifying and insulating mortar.

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of POROMAP RINZAFFO with 17-18.6 parts of water.Coefficient of permeability to water vapour: < 20 µ.Workability time of mortar: approx. 60 minutes.Maximum applicable thickness: 5 mm.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Application: gauging trowel.Consumption: 7.5-8 kg/m² (for a 5 mm thick layer).Packaging: 25 kg bags.

PoroMap RinzaffoPre-blended, salt-resistant mortar applied by hand before applying POROMAP INTONACO dehumidifying and insulating mortar.

13.5 Lime based transpirant render ________________________________________________________________



GP-CS IIEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE STRUTTURALE NHL with 16-17 parts of water (4-4.25 l of water for each 25 kg bag of product).Porosity of the mortar while still fresh: 7%.Coefficient of permeability to water vapour: 60 µ.Workability time of fresh mortar: approx. 60 minutes.Minimum applicable thickness: 10 mm.Maximum applicable thickness per layer: 40 mm.Classification:– EN 998-1 - type GP mortar, category CS IV;– EN 998-2 - type G mortar, class M 15.Storage: 12 months.Application: continuous-mixing rendering machine or gauging trowel.Consumption: approx. 17 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique Strutturale NHLHigh-performance mortar for transpirant render and masonry work, based on natural hydraulic lime and ECO-POZZOLAN, particularly suitable for making “reinforced” and installation mortar.

13.6 “Structural” reinforced render _____________________________________________________________



GP-CS IVEN 998-1

EN 998-1

MASONRY MORTAR


G-M15EN 998-2

EN 998-2

116

TECHNICAL DATA:Maximum diameter of aggregate: 300 µm.Mixing ratio: 100 parts of POROMAP FINITURA with 24-26 parts of water.Workability time of mortar: approx. 60 min.Maximum applicable thickness per layer: 2 mm.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Application: smooth metal trowel.Consumption: 1.4 kg/m² (per mm of thickness).Packaging: 25 kg bags.

PoroMap FinituraCement-free, light-coloured fine mortar for finishing off dehumidifying renders applied on stone, brick and tuff masonry.

TECHNICAL DATA:Maximum size of aggregate: < 100 µm.Mixing ratio: 100 parts of MAPE-ANTIQUE FC ULTRAFINE with 30-32 parts of water (6-6.4 l of water for each 20 kg bag of product).Workability time of fresh mortar: approx. 60 min.Maximum applicable thickness per layer: 1 mm.Classification: EN 998-1 - GP type mortar, category CS II.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Application: flat metal trowel.Consumption: approx. 1.3 kg/m² (per cm of thickness).Packaging: 20 kg bags.

Mape-Antique FC UltrafineSalt-resistant, transpirant ultrafine texture skimming mortar, based on lime and ECO-POZZOLAN for a smooth finish on render.

TECHNICAL DATA:Maximum size of aggregate: 600 µm.Mixing ratio: 100 parts of MAPE-ANTIQUE FC GROSSO with 18-20 parts of water (4.5-5 l of water for each 25 kg bag of product).Workability time of fresh mortar: approx. 60 min.Maximum applicable thickness per layer: 3 mm.Classification: EN 998-1 - GP type mortar, category CS IV.EMICODE: EC1 R - very low emission.Storage: 12 months.Application: flat metal trowel.Consumption: approx. 1.4 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique FC GrossoSalt-resistant, transpirant large-texture skimming mortar, based on lime and ECO-POZZOLAN for a rough finish on render.




GP-CS IVEN 998-1

EN 998-1



GP-CS IIEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1

13.7 Skimming of dehumidifying, transpirant and “structural” renders _________________________________

TECHNICAL DATA:Maximum size of aggregate: 400 µm.Mixing ratio: 100 parts of MAPE-ANTIQUE FC with 24-26 parts of water (6-6.5 l of water for each 25 kg bag of product).Workability time of fresh mortar: approx. 60 min.Maximum applicable thickness per layer: 2 mm.Classification: EN 998-1 - GP type mortar, category CS IV.EMICODE: EC1 R Plus - very low emission.Storage: 12 months.Colour: white or light pink.Application: flat metal trowel.Consumption: approx. 1.4 kg/m² (per mm of thickness).Packaging: 25 kg bags.

Mape-Antique FC CivileSalt-resistant, transpirant fine-texture skimming mortar, based on lime and ECO-POZZOLAN, for a natural finish on render.

EN 998-1



GP-CS IVEN 998-1

117

TECHNICAL DATA:Maximum diameter of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE STRUTTURALE NHL with 16-17 parts of water (4-4.25 l of water for each 25 kg bag of product).Porosity of the mortar while still fresh: 7%.Coefficient of permeability to water vapour: 60 µ.Workability time of fresh mortar: approx. 60 minutes.Minimum applicable thickness: 10 mm.Maximum applicable thickness per layer: 40 mm.Classification:– EN 998-1 - type GP mortar, category CS IV;– EN 998-2 - type G mortar, class M 15.Storage: 12 months.Application: continuous-mixing rendering machine or gauging trowel.Consumption: approx. 17 kg/m² (per cm of thickness).Packaging: 25 kg bags.

Mape-Antique Strutturale NHLHigh-performance mortar for transpirant render and masonry work, based on natural hydraulic lime and ECO-POZZOLAN, particularly suitable for making “reinforced” and installation mortar.

TECHNICAL DATA:Maximum size of aggregate: 1.5 mm.Mixing ratio: 100 parts of MAPE-ANTIQUE ALLETTAMENTO with 18-20 parts of water (4.5-5 l of water for each 25 kg bag of product).Porosity of the mortar while still fresh: 6%.Coefficient of permeability to water vapour: µ 15/35.Workability time of fresh mortar: approx. 60 min.Minimum applicable thickness: 5 mm.Maximum applicable thickness per layer: 30 mm.Classification: EN 998-2 - G type mortar, class M 5.Storage: 12 months.Application: trowel.Consumption: 16.5 kg/m² (per cm of thickness).Packaging: 25 kg sacks.

Mape-Antique AllettamentoSalt-resistant masonry mortar, based on natural hydraulic lime and ECO-POZZOLAN, for installation layers and pointing on “natural finish” masonry.

13.8 Installing and pointing brick, stone, tuff and mixed masonries ____________________________________



GP-CS IVEN 998-1

EN 998-1

MASONRY MORTAR


G-M15EN 998-2

EN 998-2

MASONRY MORTAR


G-M5EN 998-2

EN 998-2

RESTORATION OF WOODEN STRUCTURES

120

14. RESTORATION OF WOODEN STRUCTURES

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 1 : 1.Workability time: 30-40 minutes.Final hardening time: 12-24 hours.Storage: 24 months.Application: roller, brush or pipe cleaner.Consumption: approx. 150 g/m².Packaging: 1 kg units (comp. A = 0.5 kg and comp. B = 0.5 kg).

Mapewood Primer 100Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 2 : 1.Workability time: 1 hour.Setting time: 4-5 hours.Final hardening time: 7 days.Storage: 24 months.Application: metal trowel.Consumption: 1.59 kg/dm³ (of cavities to be filled).Packaging: 3 kg units (comp. A = 2 kg and comp. B = 1 kg).

Mapewood Paste 140Thixotropic epoxy adhesive for restoring wooden structural elements.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Workability time: 40’.Setting time: 50’.Final hardening time: 7 days.Storage: 24 months.Application: pouring or injection.Consumption: 1.01 kg/dm³ (of cavities to be filled).Packaging: 2.5 kg units (comp. A = 2 kg and comp. B = 0.5 kg).

Mapewood Gel 120Gel epoxy adhesive for restoring wooden structural elements.

ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS

124

15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS

TECHNICAL DATA:Maximum diameter of aggregate: 1 mm.Mixing ratio: 100 parts of POROCOL FF with 27-29 parts of water.Pot life of mix: approximately 2-3 hours.Minimum applicable thickness: 1 mm.Maximum applicable thickness: 1 cm per layer.Classification: EN 998-1 - type GP mortar, category CS III.EN 998-2 - type T mortar, class M5.Storage: 12 months.Application: notched or smooth trowel.Consumption: – as adhesive for flat block walls: 2-4 kg/m²;– as skimming layer for flat block walls: 1.2 kg/m² per

mm of thickness.Packaging: 25 kg bags.

Porocol FFOne-component, fine-grained, white cementitious mortar for laying cellular-concrete blocks and for smoothing over the surface in layers of up to 10mm thick.Fire resistance class according to EN 1364-1 EI 240 - E 120.

TECHNICAL DATA:Maximum diameter of aggregate: 1 mm.Mixing ratio: 100 parts of POROCOL with 23-25 parts of water.Pot life of mix: approximately 2-3 hours.Minimum applicable thickness: 1 mm.Maximum applicable thickness: 1.5 cm per layer.Classification: EN 998-1 - type GP mortar, category CS III.EN 998-2 - type T mortar, class M5.Storage: 12 months.Application: notched or smooth trowel.Consumption:– as adhesive for flat block walls: 5-7 kg/m²;– as skimming layer for flat block walls: 1.4 kg/m² per

mm of thickness.Packaging: 25 kg bags.

PorocolCementitious adhesive mortar for expanded block masonry, fire resistance class REI 180.



GP-CS IIIEN 998-1



GP-CS IIIEN 998-1

EN 998-1

EN 998-1

MASONRY MORTAR


EN 998-2

T-M5

MASONRY MORTAR


EN 998-2

T-M5

EN 998-2

EN 998-2

PRODUCTS FOR THE RESTORATION OF CONCRETE

128

TECHNICAL DATA:Mapeshield I 10 10/10 10/20External surface: 100 x 50 mm ± 10% 100 x 50 mm ± 10%Height: 12 mm ± 10% 15 mm ± 10%Weight: 230 g ± 10% 320 g ± 10%Storage: 12 months.Application: directly on steel reinforcement.Consumption: according to the density of steel reinforcement.Packaging: boxes of 24 pieces.Mapeshield I 30 30/10 30/20External surface: 300 x 50 mm ± 5% 300 x 50 mm ± 5%Height: 10 mm ± 10% 12 mm ± 10%Weight: 450 g ± 10% 570 g ± 10%Storage: 12 months.Application: directly on steel reinforcement.Consumption: according to the density of steel

reinforcement.Packaging: boxes of 12 pieces.

Mapeshield IPure zinc anodes coated with a special conductive paste, for galvanic cathodic protection against corrosion of steel reinforcement in new structures and in structures requiring repair.

TECHNICAL DATA:Thickness of plate: 0.25 mm.Height: 25 cm.Weight: 3.15 kg/m² ± 5%.Storage: 12 months.Application: external surfaces of concrete.Consumption: according to the density of steel reinforcement.Packaging: wooden boxes with 1 roll 25 m x 25 cm wide.

Mapeshield E 25Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods.

TECHNICAL DATA:Maximum dimension of aggregate: 0.5 mm.Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water.Pot life of mix: approximately 1 hour.Minimum applicable thickness: 2 mm.Waiting time between each coat: approximately 2 hours.Waiting time before applying mortar: 6-24 hours.Classification: EN 1504-7.Storage: 12 months.Application: brush in two coats.Consumption: 100 g/m for 8 mm diameter rebar (2 mm of product applied).Packaging: boxes of 4x5 kg bags.

Mapefer 1KOne-component, anti-corrosion cementitious mortar for steel reinforcement rods.

TECHNICAL DATA:Maximum dimension of aggregate: 0.5 mm.Mixing ratio: comp. A : comp. B = 3 : 1.Pot life of mix: approximately 1 hour.Minimum applicable thickness: 2 mm.Waiting time between each coat: approximately 2 hours.Waiting time before applying mortar: 6-24 hours.Classification: EN 1504-7.Storage: 12 months.Application: brush in two coats.Consumption: 120 g/m for 8 mm diameter rebar (2 mm of product applied).Packaging: 2 kg kits:– 1.5 kg bag (comp. A);– 0.5 kg bottle (comp. B).

MapeferTwo-component, anti-corrosion cementitious mortar for steel reinforcement rods.

16. PRODUCTS FOR THE RESTORATION OF CONCRETE

16.1 Protection of steel reinforcement rods __________________________________________________________


EN 1504-7REINFORCEMENT CORROSION

PROTECTION

EN 1504-7


EN 1504-7REINFORCEMENT CORROSION

PROTECTION

EN 1504-7

129

TECHNICAL DATA:Maximum dimension of aggregate: 1 mm.Mixing ratio: 100 parts of MAPEGROUT FAST-SET with 15-16 parts of water.Pot life of mix: approximately 10 minutes (at +20°C).Minimum applicable thickness: 5 mm.Maximum applicable thickness: 2-2.5 cm per layer.Classification: EN 1504-3 - class R3 structural mortar.Storage: 12 months.Application: trowel or gauging trowel.Consumption: 18 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout Fast-SetFibre-reinforced, quick setting and hardening, controlled-shrinkage mortar for repairing concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT BM comp. A with 18.8 parts of MAPEGROUT BM comp. B.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 3.5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months (comp. A); 24 months (comp. B).Application: trowel, gauging trowel or rendering machine.Consumption: approximately 21 kg/m² per cm of thickness.Packaging: 29.7 kg kits:– 25 kg vacuum-packed polyethylene bags (comp. A);– 4.7 kg drums (comp. B).

Mapegrout BMTwo-component cementitious mortar with a low modulus of elasticity for repairing concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 1 mm.Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 5 mm.Maximum applicable thickness: 3.5 cm per layer.Classification: EN 1504-3 - class R3 structural mortar.Storage: 12 months.Application: trowel, gauging trowel or rendering machine, including the continuous-mixing type.Consumption: 17 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout 430Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

TECHNICAL DATA:Consistency: liquid.Storage: 12 months.Consumption:– mortar: 0.25% in weight of pre-blended mix;– concrete and beton: 5-8 l/m³.Packaging: 20 kg drums.

Mapecure SRACuring admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks.


REPAIR MORTAR

R3EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

EN 1504-3


REPAIR MORTAR

R3EN 1504-3

EN 1504-3

16.2 Repairs to concrete with compensated-shrinkage mortar and binders ________________________________

130

1. MASSETTI E RASATURE

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT HI-FLOW with 13-14 parts of water and 0.25% of MAPECURE SRA.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 4 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 21 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout Hi-FlowFibre-reinforced, controlled-shrinkage mortar for repairing concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT FMR with 17-18 parts of water.Pot life of mix: approximately 1 hour (at 20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: gauging trowel, trowel or rendering machine.Consumption: 19 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout FMRShrinkage-compensated, sulphate-resistant, thixotropic mortar fibre-reinforced with flexible, alloy metal fibres, particularly suitable for repairing concrete structures where higher ductility is required.


REPAIR MORTAR

R4EN 1504-3

EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

Polvere + Fibre

Powder + Fibers

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT HI-FLOW GF with 14-16 parts of water and 0.25% of MAPECURE SRA.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 21 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout Hi-Flow GFHi-flow, shrinkage-compensated cementitious mortar reinforced with inorganic fibres, for repairing concrete structures where higher ductility is required.

Polvere + Fibre

Powder + Fibers


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT HI-FLOW TI 20 with 14-16 parts of water and 0.25% of MAPECURE SRA.Pot life of mix: approximately 1 hour (at 20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout Hi-Flow TI 20Flowable shrinkage-compensated, fibre-reinforced, high-ductility cementitious mortar, with stiff steel fibres for repairing concrete.


131

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV T with 12.5-13.5 parts of water.Pot life of mix: 10 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Colour: black.Application: gauging trowel or trowel.Consumption: 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SV TQuick-setting and hardening, compensated-shrinkage thixotropic mortar for repairing concrete and fixing drains, manholes and urban fittings in place.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water.Pot life of mix: approximately 20 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: pouring into formwork.Consumption: approximately 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SV FiberHi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water.Pot life of mix: 15 minutes (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Colour: grey and black.Application: pouring into formwork.Consumption: 20 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout SVQuick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place.

TECHNICAL DATA:Maximum dimension of aggregate: 1.6 mm.Mixing ratio: 100 parts of MAPEGROUT LM2K comp. A with 21 parts of MAPEGROUT LM2K comp. B.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 3 mm.Maximum applicable thickness: 2 cm per layer.Classification: EN 1504-3 - class R3 structural mortar.Storage: 12 months (comp. A); 24 months (comp. B).Application: gauging trowel, trowel or rendering machine.Consumption: approximately 21 kg/m² per cm of thickness.Packaging: 30.25 kg kits: – 25 kg vacuum-packed polyethylene bags (comp. A); – 5.25 kg drums (comp. B).

Mapegrout LM2KTwo-component, thixotropic, fibre-reinforced, cementitious mortar with a low modulus of elasticity and added organic corrosion inhibitor for repairing concrete, applied in a single layer at a thickness of 3 to 20 mm.


REPAIR MORTAR

R4EN 1504-3

EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

Polvere + Fibre

Powder + Fibers


REPAIR MORTAR

R3EN 1504-3

EN 1504-3

132


TECHNICAL DATA:Maximum dimension of aggregate: 4 mm.Mixing ratio: 3.2-3.4 litres of water per 25 kg bags.Pot life of mix: approx. 1 hour (at +20°C and 50% RH)Minimum applicable thickness: 3 cm.Maximum applicable thickness: 25 cm Storage: 12 months.Application: pouring into formwork.Consumption: 20 kg/m2 per cm of thincknessPackaging: 25 kg bags.

Mapegrout ME 06High strength, shrinkage compensated, super flow micro-concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 4 mm.Mixing ratio: 3.1-3.3 litres of water per 25 kg bags.Pot life of mix: approx. 1 hour (at +20°C and 50% RH)Maximum applicable thickness: up to 22 cmStorage: 12 months.Application: pouring into formwork.Yield: 12.7 ltrs/25kg.Packaging: 25 kg bags.

Mapegrout ME 05High performance, shrinkage compensated, high-flow micro-concrete and thick section grout.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT T80 with 15-17 parts of water (approx. 3.75-4.25 litres per 25 kg bags) and 0.25% of MAPECURE SRA (one 0.25 kg bottle for 4 bags of MAPEGROUT T80).Pot life of mix: approx. 1 hour.Minimum applicable thickness: 1 cm.Maximum applicable thickness: 6 cm per layer on vertical surfaces and 3 cm per layer on overhead applications.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: trowel or spray with piston or worm-screw type rendering machine.Yield:13 litres/25 kg.Packaging: 25 kg bags.

Mapegrout T80Single component sulphate and chloride resistant, fibre-reinforced thixotropic mortar for the repair of concrete.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT T60 ME with 15 parts of water (approx. 3.75-4.25 litres per 25 kg bags) and 0.25% of MAPECURE SRA (one 0.25 kg bottle for 4 bags of MAPEGROUT T60 ME).Pot life of mix: approx. 1 hour.Minimum applicable thickness: 1 cm.Maximum applicable thickness: 6 cm per layer on vertical surfaces and 3 cm per layer on overhead application.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: trowel or spray with piston or worm-screw type rendering machine.Consumption: 12.6 kg/m² per cm of thickness.Packaging: 25 kg bags.

Mapegrout T60 METhixotropic, sulphate and chloride resistant, fibre-reinforced structural repair mortar.


133

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP SMOOTH & REPAIR with 19-21 parts of water.Pot life of mix: approximately 20 minutes (at 20°C).Minimum applicable thickness: 3 mm.Maximum applicable thickness: 4 cm per layer.Classification: – EN 1504-3 - class R2 non-structural mortar.– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Application: gauging trowel or trowel.Consumption: approximately 15 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags and 20 kg boxes (4x5 kg packets).

Planitop Smooth & RepairQuick-setting, fibre-reinforced, controlled-shrinkage cementitious mortar for repairing and smoothing concrete, may be applied in various thicknesses from 3 mm to 40 mm in a single layer.

TECHNICAL DATA:Maximum dimension of aggregate: 2 mm.Mixing ratio: 100 parts of PLANITOP G40 ME with 17-19 parts of water.Pot life of mix: approx. 1 hour (at +23°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 5 cm per layer.Classification: EN 1504-3: R3.Storage: 12 months.Application: trowel or spray applied.Consumption: 16 kg/m² per cm of thickness.Packaging: 25 kg bags.

Planitop G40 MELow shrinkage, polymer modified cementitious repair mortar.


REPAIR MORTAR

R3EN 1504-3

EN 1504-3


REPAIR MORTAR

R4EN 1504-3

EN 1504-3

TECHNICAL DATA:Maximum dimension of aggregate: 0.5 mm.Mixing ratio: 100 parts of PLANITOP 400 with 15-16 parts of water.Pot life of mix: approximately 10 minutes (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 4 cm per layer.Classification: EN 1504-3 - class R3 structural mortar.Storage: 12 months.Application: trowel or gauging trowel.Consumption: 18.5 kg/m² per cm of thickness.Packaging: 25 kg bags; 20 kg boxes (4x5 kg packets).

Planitop 400Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 cm.Maximum applicable thickness: 3-3.5 cm per layer.Classification: EN 1504-3 - class R4 structural mortar.Storage: 12 months.Application: gauging trowel, trowel or rendering machine.Consumption: 19 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapegrout ThixotropicFibre-reinforced, controlled-shrinkage mortar for repairing concrete.



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2


REPAIR MORTAR

R2EN 1504-3

EN 1504-3

134


TECHNICAL DATA:Mixing ratio: - injection slurry: 100 parts of STABILCEM with 30-32 parts of water;- mortar, beton and concrete: according to the consistency and performance required from the aggregate.Storage: 12 months.Application: injection and pouring into formwork.Consumption:– injection slurry: 1.6 kg/dm³ of cavities to be filled;– mortar and beton: 350-550 kg/m³;– concrete: 300-400 kg/m³.Packaging: 20 kg bags.

StabilcemExpansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete.


SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES

138

TECHNICAL DATA:Mixing ratio: 100 parts of NIVOPLAN with 25 parts of water.Pot life of mix: 2-3 hours (at +23°C).Minimum applicable thickness: 2 mm.Maximum applicable thickness: 3 cm per layer.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Colour: grey and white.Application: trowel or gauging trowel.Consumption: 14 kg/m² per cm of thickness.Packaging: 25 kg bags.

NivoplanSmoothing mortar for indoor and outdoor walls and ceilings.

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 100 parts of MONOFINISH with 18-19 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 2-3 mm per layer.Classification: – EN 1504-3 - class R2 non-structural mortar.– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Application: trowel.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 22 kg vacuum-packed polyethylene bags.

MonofinishOne-component, normal-setting cementitious mortar for smoothing concrete and cementitious render.

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 2-3 mm per layer.Classification: – EN 1504-3 - class R2 non-structural mortar.– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months (comp. A); 24 months (comp. B).Application: trowel.Consumption: 2 kg/m² per mm of thickness.Packaging: 30 kg kits:– 24 kg bags (comp. A);– 6 kg drums (comp. B).

TECHNICAL DATA:Mixing ratio: 3 parts of MAPELASTIC GUARD comp. A with 1 part of MAPELASTIC GUARD comp. B.Pot life of mix: approximately 1 h (at 20°C).Minimum applicable thickness: 2 mm per layer.Classification: EN 1504-2 - coating (C) principles PI, MC and IR.Storage: 12 months (comp. A); 24 months (comp. B).Application: trowel or by spray with a rendering machine.Consumption:approximately 1.7 kg/m² per mm of thickness (by trowel).approximately 2.2 kg/m² per mm of thickness (by spray).Packaging:32 kg kits:– 24 kg bags (comp. A);– 8 kg canisters (comp. B).

MapefinishTwo-component cementitious mortar for finishing off concrete.

Mapelastic GuardTwo-component, elastic cementitious mortar for protecting large concrete structures subjected to high stress.

17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES



EN 1504-2 (C)

MC-IRPRINCIPLES



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

EN 1504-2


REPAIR MORTAR

R2EN 1504-3

EN 1504-3



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2


REPAIR MORTAR

R2EN 1504-3

EN 1504-3



GP-CS IVEN 998-1

EN 998-1

NEW

139

TECHNICAL DATA:Maximum dimension of aggregate: 0.7 mm.Mixing ratio: 100 parts of PLANITOP 207 with 17-19 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer (6 mm in 2 layers with MAPENET 150 sandwiched between).Classification: – EN 998-1 - type GP mortar, category CS IV;– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colour: grey and white.Application: trowel.Consumption: approximately 1.5 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 207Water-repellent cementitious skimming mortar with a medium-textured, natural finish for concrete and plastic, glass and porcelain coverings.

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP 200 with 20-23 parts of water.Pot life of mix: approximately 1 hour and 30 minutes (at 20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer (6 mm in 2 layers with MAPENET 150 sandwiched between).Classification: – EN 998-1 - type GP mortar, category CS IV;– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colour: grey and white.Application: trowel.Consumption: approximately 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 200Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.

TECHNICAL DATA:Maximum dimension of aggregate: 0.1 mm.Mixing ratio: 100 parts of PLANITOP 110 with 30 parts of water (approx. 6 litres of water per 20 kg bag).Pot life of mix: approx. 1 hour.Applicable thickness: 1 mm per layer.Storage: 12 months.Colour: grey.Application: flat trowel, wet sponge float.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 20 kg bags.

Planitop 110Single-component, normal setting cementitious mortar for smoothing concrete surfaces.

TECHNICAL DATA:Maximum dimension of aggregate: 0.2 mm.Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water.Pot life of mix: 20-30 minutes (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer.Classification: EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Application: trowel.Consumption: 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 100Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render.



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2



GP-CS IVEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1

140


TECHNICAL DATA:Maximum size of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP 210 with 21-24 parts of water.Pot life of mix: approximately 1 h (at 20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm (6 mm in 2 layers with MAPENET 150 embedded between the layers).Classification:EN 998-1 - GP type mortar, category CS IV.EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colours: grey and white.Application: trowel.Consumption: approximately 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 210Water-repellent, cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic coatings.

TECHNICAL DATA:Maximum size of aggregate: 1 mm.Mixing ratio: 100 parts of PLANITOP 217 with 19-22 parts of water.Pot life of mix: approximately 1 h (at 20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm (6 mm in 2 layers with MAPENET 150 embedded between the layers).Classification:EN 998-1 - GP type mortar, category CS IV.EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colours: grey and white.Application: trowel.Consumption: approximately 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

TECHNICAL DATA:Maximum size of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP 510 with 28-31 parts of water.Pot life of mix: approximately 1 h (at 20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm.Classification: EN 998-1 - type GP mortar, category CS II.Storage: 12 months.Colours: grey and white.Application: trowel.Consumption: approximately 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

TECHNICAL DATA:Maximum size of aggregate: 1 mm.Mixing ratio: 100 parts of PLANITOP 517 with 20-22 parts of water.Pot life of mix: approximately 1 h (at 20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm.Classification: EN 998-1 - type GP mortar, category CS III.Storage: 12 months.Colours: grey and white.Application: trowel.Consumption: approximately 1.3 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 217Water-repellent cementitious skimming mortar with a coarse-textured, natural finish for concrete and plastic coatings.

Planitop 510Lime-cement skimming mortar with a fine-textured, natural finish for render.

Planitop 517Lime-cement skimming mortar with a coarse-textured, natural finish for render.



GP-CS IIEN 998-1

EN 998-1



GP-CS IVEN 998-1

EN 998-1



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2



GP-CS IIIEN 998-1

EN 998-1

NEW

NEW

NEW



GP-CS IVEN 998-1

EN 998-1



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

NEW

141



GP-CS IVEN 998-1

EN 998-1



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

TECHNICAL DATA:Maximum dimension of aggregate: < 0.1 mm.Mixing ratio: 100 parts of PLANITOP 580 with 60 parts of water.Pot life of mix: approximately 50 minutes (at +23°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer.Storage: 12 months.Colour: white.Application: trowel.Consumption: approximately 0.8 kg/m² per mm of thickness.Packaging: 15 kg bags.

Planitop 580Lime-gypsum skimming mortar for internal render.

TECHNICAL DATA:Maximum dimension of aggregate: < 0.1 mm.Mixing ratio: 100 parts of PLANITOP 560 with 39-43 parts of water.Pot life of mix: approximately 2 hours (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 2 mm.Classification: EN 998-1 - type GP mortar, category CS IV.Storage: 12 months.Colour: white.Application: trowel.Consumption: approximately 1.1 kg/m² per mm of thickness.Packaging: 20 kg bags.

Planitop 560Lime-cement skimming mortar with an ultra-fine-textured finish for render.

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP 540 with 24-26 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer.Classification: – EN 998-1 - type GP mortar, category CS IV;– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colour: grey and white.Application: trowel.Consumption: approximately 1.2 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 540Water-repellent cementitious skimming mortar with a fine-textured, natural finish for render and concrete.



GP-CS IVEN 998-1

EN 998-1

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 100 parts of PLANITOP 530 with 24-27 parts of water.Pot life of mix: approximately 2 hours (at +20°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm.Classification: – EN 998-1 - type GP mortar, category CS IV;– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Colour: grey and white.Application: trowel.Consumption: approximately 1.25 kg/m² per mm of thickness.Packaging: 25 kg bags.

Planitop 530Lime-cement skimming mortar with a fine-textured, natural finish for render and concrete.



GP-CS IVEN 998-1

EN 998-1



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

142


TECHNICAL DATA:Maximum dimension of aggregate: 1 mm.Mixing ratio: 100 parts of PLANITOP FAST 330 with 18-20 parts of water.Pot life of mix: 20 minutes (at +20°C).Minimum applicable thickness: 3 mm.Maximum applicable thickness: 3 cm per layer.Classification: – EN 998-1 - type GP mortar, category CS IV;– EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Application: trowel.Consumption: 14.5 kg/m² per cm of thickness.Packaging: 25 kg vacuum-packed polyethylene bags.

Planitop Fast 330Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2

TECHNICAL DATA:Maximum dimension of aggregate: 0.2 mm.Mixing ratio:comp. A : comp. B : comp. C = 4.8 : 15.2 : 80.Pot life of mix: 40 minutes (at +23°C).Minimum applicable thickness: 1 mm.Maximum applicable thickness: 3 mm per layer (up to 5 mm on limited areas).Classification: – EN 1504-2 - coating (C) principles MC and IR.Storage: 12 months.Application: trowel or rendering machine.Consumption: 2 kg/m² per mm of thickness.Packaging: 31.25 kg kits:– 1.5 kg drums (comp. A);– 4.75 kg drums (comp. B);– 25 kg bags (comp. C).

Triblock FinishThree-component, epoxy-cementitious mortar for smoothing damp substrates.



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2



GP-CS IVEN 998-1

EN 998-1

PRODUCTS FOR ANCHORING AND RAPID FIXING

146

18. PRODUCTS FOR ANCHORING AND RAPID FIXING

TECHNICAL DATA:Maximum dimension of aggregate: 2 mm.Mixing ratio: – Flowable mix: 3.1 - 3.2 l of water per 25 kg of

MAPEFILL GP ME.– Fluid mix: 4.4 - 4.6 l of water per 25 kg of MAPEFILL

GP ME.Pot life of mix: 1 hour (at +20°C).Maximum applicable thickness: 6 cm per layer.Storage: 12 months.Application: pouring.Yield: 13-14 litres of grout.Packaging: 25 kg bags.

Mapefill GP MEGeneral purpose non-shrink cementitious grout.

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water.Pot life of mix: approximately 1 hour (at +20°C).Maximum applicable thickness: 6 cm per layer.Classification: EN 1504-6.Storage: 12 months.Application: pouring.Consumption: 1.95 kg/m³ of cavities to be filled.Packaging: 25 kg vacuum-packed polyethylene bags.

MapefillFluid expansive mortar for anchoring objects in place.

TECHNICAL DATA:Maximum dimension of aggregate: < 0.1 mm.Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.Pot life of mix: approximately 1 minute (at +23°C).Storage: 12 months.Application: trowel or gauging trowel.Consumption: 1.8 kg/dm³ of cavities to be filled.Packaging: 25 kg bags, boxes of 4x5 kg packets and packages of 9x1 kg cartridges.

LampocemReady-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.


EN 1504-6ANCHORING MORTAR

EN 1504-6



EN 1504-6

TECHNICAL DATA:Maximum dimension of aggregate: 2.5 mm.Mixing ratio: 100 parts of MAPEFILL R with 17-18 parts of water.Pot life of mix: approximately 45 minutes (at +20°C).Maximum applicable thickness: 6 cm per layer.Classification: EN 1504-6.Storage: 12 months.Application: pouring.Consumption: 1.95 kg/m³ of cavities to be filled.Packaging: 25 kg vacuum-packed polyethylene bags.

Mapefill RQuick-hardening, fluid expansive mortar for quickly anchoring objects in place.

147

European Technical Approvaloption 1 for cracked concrete

European Technical Approvaloption 7 for non cracked concrete

M8 ÷ M30Ø8 ÷ Ø32

TECHNICAL DATA:Suitable substrates: all full and perforated substrates, such as concrete and concrete derivates, brickwork, mixed masonry and wood.Recommended perforation technique: drill or hammer-drill.Condition of hole for application: clean, dry, damp or wet.Application temperature range of substrate: -10°C/+35°C.Workability time at +20°C: 6’.Final hardening time at +20°C: 45’ (dry substrate), 90’ (wet substrate).Recommended diameter of fastener: from M8 to M30, from Ø8 to Ø32.Certification available: CE symbol; ETA option 7 (fasteners in compressive side); ETA rebar option (added reinforcement fasteners); reaction to fire.Application: extrusion gun.Packaging: 300 ml, 380 ml.

Mapefix VE SFStyrene-free, hybrid vinyl resin chemical fastener for structural loads and construction bars.

TECHNICAL DATA:Maximum dimension of aggregate: 2 mm.Mixing ratio: – Flowable mix: 4.0 - 4.2 l of water per 25 kg of

MAPEFILL SP ME.– Fluid mix: 5.1 - 5.3 l of water per 25 kg of MAPEFILL

SP ME.Pot life of mix: 1 hour (at +20°C).Maximum applicable thickness: 6 cm per layer.Storage: 12 months.Application: pouring.Yield: 13-14 litres of grout.Packaging: 25 kg bags.

TECHNICAL DATA:Suitable substrates: all full and perforated substrates, such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock.Recommended perforation technique: drill, hammer drill, core drilling, diamond-tipped tools.Condition of hole for application: clean, dry or damp or wet.Workability time at +20°C: 30’.Final hardening time at +20°C: 10 h (dry substrate), 20 h (wet substrate).Recommended diameter of fastener: from M8 to M39, from Ø8 to Ø40.Certification available: CE mark; ETA option 7 (fasteners in compressive side); ETA option 1 (fasteners in tensile side); reaction to fire.Application: extrusion gun.Packaging: 385 ml.

Mapefill SP MEPremium super flow non-shrink cementitious grout.

Mapefix EPPure epoxy resin chemical fastener for structural loads.

TECHNICAL DATA:Suitable substrates: all perforated substrates; may also be used on concrete, brickwork and mixed masonry.Recommended perforation technique: drill or hammer-drill.Condition of hole for application: clean, dry or damp.Application temperature range of substrate: +5/+35°C.Workability time at +20°C: 6’.Final hardening time at +20°C: 45’ (dry substrate), 90’ (wet substrate).Recommended diameter of fastener: from M8 to M24.Certification available: CE mark; ETA option 7 (fasteners in compressive side).Application: extrusion gun.Packaging: 300 ml, 380 ml.

Mapefix PE SFStyrene-free, polyester resin chemical fastener for light loads.


M8 ÷ M24

European Technical Approvalpost installed rebar


M8 ÷ M30Ø8 ÷ Ø32

148


TECHNICAL DATA:Maximum dimension of aggregate: 2 mm.Mixing ratio:comp. A : comp. B : comp. C = 4 : 1.5 : 22.5.Pot life of mix: 75 minutes (at 23°C).Maximum applicable thickness: 5 cm per layer.Storage: Comp. A & B - 24 months in original packaging in a dry area;Comp. C - 12 months in original packaging in a dry area.Application: pouring.Consumption: 2.10 kg/m² per mm of thickness.Packaging:28 kg packages:– 4 kg of comp. A;– 1.5 kg of comp. B;– 22.5 kg of comp. C.

Planigrout 300 SPHigh-performance easy-flow three-component epoxy grout.

18. PRODUCTS FOR ANCHORING AND RAPID FIXING

PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE

152

19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Pot life of mix: 70 minutes (at +23°C).Minimum applicable thickness: 1-2 mm.Maximum applicable thickness: 1 cm per layer.Classification: EN 1504-4.Storage: 24 months.Application: trowel.Consumption: 1.60-1.65 kg/m² per mm of thickness.Packaging:6 kg kits:– 4.5 kg drums (comp. A);– 1.5 kg drums (comp. B).

30 kg kits:– 22.5 kg drums (comp. A);– 7.5 kg drums (comp. B).

Adesilex PG4Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Pot life of mix: 50 minutes (at +23°C).Minimum applicable thickness: 1-2 mm.Maximum applicable thickness: 1 cm per layer.Classification: EN 1504-4.Storage: 24 months.Application: trowel.Consumption: 1.65-1.75 kg/m² per mm of thickness.Packaging: 6 kg kits:– 4.5 kg drums (comp. A);– 1.5 kg drums (comp. B).

Adesilex PG2Two-component thixotropic epoxy adhesive with long workability time for structural bonds.


Adesilex PG1 RapidTwo-component, rapid-setting thixotropic adhesive for structural bonds.



Adesilex PG1Two-component thixotropic epoxy adhesive for structural bonding.

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

153

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 500 : 8.Pot life of mix: 7 minutes (at +23°C).Storage: 12 months.Application: brush or pouring.Consumption: 1.7 kg/l of cavities to be filled.Packaging:boxes of 6x508 g kits:– 500 g metal drums (comp. A);– 8 g tubes (comp. B).

Eporip TurboTwo-component, quick-hardening polyester resin for monolithic sealing of cracked screeds.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Pot life of mix: 60 minutes (at +23°C).Classification: EN 1504-4.Storage: 24 months.Application: brush or pouring.Consumption:– second pours: 0.5-2 kg/m²;– sealing cracks: 1.35 kg/l of cavities to be filled.Packaging:2 kg kits:– 1.5 kg drums (comp. A);– 0.5 kg drums (comp. B).

10 kg kits:– 7.5 kg metal drums (comp. A);– 2.5 kg drums (comp. B).

EporipTwo-component epoxy adhesive for monolithic sealing of cracks in screeds.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Pot life of mix: 70 minutes (at +23°C).Classification: EN 1504-5.Storage: 24 months.Application: injection or pouring.Consumption:– sealing cracks: 1.1 kg/l of cavities to be filled;– bonding concrete to steel: 1.1 kg/m² per mm of

thickness.Packaging:2.5 kg kits:– 2 kg drums (comp. A);– 0.5 kg bottles (comp. B).

Epojet LVTwo-component epoxy resin with a very low viscosity for injecting into micro-cracks.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Pot life of mix: 40 minutes (at +23°C).Classification: EN 1504-5 and EN 1504-6.Storage: 24 months.Application: injection or pouring.Consumption:– sealing cracks: 1.1 kg/l of cavities to be filled;– bonding concrete to steel: 1.1 kg/m² per mm of


4 kg kits:– 3.2 kg drums (comp. A);– 0.8 kg bottles (comp. B).

EpojetTwo-component, super-fluid epoxy resin applied by injecting.

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-5


CONCRETE INJECTION

EN 1504-5

EN 1504-5


CONCRETE INJECTION

EN 1504-5



EN 1504-6

PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES

156

20. PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES

TECHNICAL DATA:Thickness of plate: 0.80 mm.Height: – MAPESHIELD S 100: 10 cm;– MAPESHIELD S 200: 20 cm;– MAPESHIELD S 300: 30 cm.Weight: 0.70 kg/m² ± 5%.Storage: 12 months.Application: on the surface of metal structures.Packaging:– MAPESHIELD S 100: boxes containing 5 rolls

10 cm x 50 m;– MAPESHIELD S 200: boxes containing 3 rolls

20 cm x 50 m;– MAPESHIELD S 300: boxes containing 2 rolls

30 cm x 50 m.

Mapeshield SZinc plate with adhesive backing for galvanic cathodic protection against the corrosion of steel structures exposed to atmospheric conditions.

COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING

160

TECHNICAL DATA:Modulus of elasticity: 170 - 200 - 250 GPa.Fibre content: 68% - 68% - 65%.Thickness: 1.4 mm.Width: 50, 100 and 150 mm.Resistant section: 70, 140 and 210 mm².Tensile strength (MPa): 3,100 - 3,300 - 2,500.Elongation at failure: 2% - 1.4% - 0.9%.Packaging: 25 m rolls.

CarboplatePultruded carbon fibre plate impregnated with epoxy resin with a protective plastic film on both faces.


Adesilex PG2Two-component thixotropic epoxy adhesive with long workability time for structural bonds.


Adesilex PG1 RapidTwo-component, rapid-setting thixotropic epoxy adhesive for structural bonds.



Adesilex PG1Two-component thixotropic epoxy adhesive for structural bonding.

21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING

21.1 Strengthening concrete and steel structures ____________________________________________________

EN 1504-4


STRUCTURAL BONDING

EN 1504-4


STRUCTURAL BONDING

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4

EN 1504-4

161

TECHNICAL DATA:Type of fibre: basalt fibre.Weight: 250 g/m².Mesh size: 6 x 6 mm.Tensile strength (MPa): ≥ 3000.Elongation at failure: 2%.Packaging: 1 m x 50 m rolls.

Mapegrid B 250Primed basalt-fibre mesh (250 g/m²) for structural reinforcement of stone, brick, tuff and concrete surfaces.

TECHNICAL DATA:Outside diameter: 23 mm.Length: 80 mm.Diameter of hole: 5 mm.

Injectors Ø 23Plastic injectors with a non-return valve for injecting epoxy resin.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Pot life of mix: 40 minutes (at +23°C).Classification: EN 1504-5 and EN 1504-6.Storage: 24 months.Application: injection or pouring.Consumption:– sealing cracks: 1.1 kg/l of cavities to be filled;– bonding concrete to steel: 1.1 kg/m² per mm of


4 kg kits:– 3.2 kg drums (comp. A);– 0.8 kg bottles (comp. B).

EpojetTwo-component, super-fluid epoxy resin applied by injecting.

TECHNICAL DATA:Tensile modulus of elasticity: 170,000 N/mm².Content of fibre by weight: 68%.Tensile strength: 3,100 N/mm².Outside diameter: 10 mm.Inside diameter: 8 mm.Elongation at failure: 1.6%.Packaging: boxes of 10x2 m rolls.

CarbotubePultruded carbon fibre tube impregnated with epoxy resin for reinforced injections in masonry.

EN 1504-5


CONCRETE INJECTION

EN 1504-5



EN 1504-6

162


TECHNICAL DATA:Tensile modulus of elasticity: 40,800 N/mm².Fibre content: 75%.Transversal section: 71.26 mm².Tensile strength: 760 N/mm².Nominal diameter: 9.53 mm.Packaging: boxes of 10x6 m rolls.

Maperod GPultruded carbon fibre rods impregnated with epoxy-modified vinylester resin for structural reinforcement of damaged reinforced concrete, brick, stone and tuff elements.

TECHNICAL DATA:Modulus of elasticity: 155,000 N/mm².Fibre content: 71%.Transversal section: 73.9 mm².Tensile strength: 2,000 N/mm² .Single shear strength: 75 N/mm² .Nominal diameter: 9.7 mm.Packaging: boxes of 10x2 m rolls.

Maperod CPultruded carbon fibre tube impregnated with epoxy resin for structural strengthening of damaged concrete and masonry elements.

TECHNICAL DATA:Type of fibre: A.R. type glass fibre.Weight: 225 g/m².Mesh size: 25 x 25 mm.Tensile strength (kN/m): 45.Elongation at failure: < 3%.Packaging: 45.70 m x 90 cm rolls.

Mapegrid G 220Alkali-resistant, primed glass fibre mesh for structural “reinforced” strengthening of stone, brick and tuff substrates.

TECHNICAL DATA:Type of fibre: A.R. type glass fibreWeight: 125 g/m².Mesh size: 12.7 x 12.7 mm.Tensile strength (kN/m): 30.Elongation at failure: < 3%.Packaging: 25 m x 45 cm rolls.

Mapegrid G 120Pre-primed, alkali-resistant (A.R.) glass fibre mesh, for localised reinforced “strengthening” of masonry substrates.

163

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Workability time: 40 minutes (at +23°C).Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate).Brookfield Viscosity: 7,000 mPa·s (rotor 3 - 5 revs).Consumption: according to the type and width of the fabric.Packaging:5 kg kits:– 4 kg drums (comp. A);– 1 kg drums (comp. B).

MapeWrap 31Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 4 : 1.Workability time: 40 minutes (at +23°C).Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate).Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs).Consumption: according to the type and width of the fabric.Packaging:5 kg kits:– 4 kg drums (comp. A);– 1 kg drums (comp. B).

MapeWrap 21Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Workability time: 60 minutes (at +23°C).Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate).Classification: EN 1504-4.Application: trowel.Consumption: 1.55 kg/m² per mm of thickness.Packaging:6 kg kits:– 4.5 kg drums (comp. A);– 1.5 kg drums (comp. B).

MapeWrap 12Two-component, slow-setting, thixotropic epoxy grout for evening out concrete surfaces.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Workability time: 40 minutes (at +23°C).Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate).Classification: EN 1504-4.Application: trowel.Consumption: 1.55 kg/m² per mm of thickness.Packaging:6 kg kits:– 4.5 kg drums (comp. A);– 1.5 kg drums (comp. B).

MapeWrap 11Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces.

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4


STRUCTURAL BONDING

EN 1504-4


STRUCTURAL BONDING

EN 1504-4


STRUCTURAL BONDING

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

EN 1504-4EN 1504-4

EN 1504-4

164


TECHNICAL DATA:Weight: 380-760 g/m².Equivalent thickness of dry fabric: 0.053-0.106 mm.Tensile strength (MPa): > 4.800.Tensile modulus of elasticity (GPa): 230.Width: 30-48.5 cm.Elongation at failure: 2.1%.Packaging: 50 m rolls.

MapeWrap C QUADRI-AXBalanced, high-strength, quadri-directional carbon fibre fabric.

TECHNICAL DATA:Diameters available: 6, 8, 10 and 12 mm.Equivalent surface area of dry fabric: diam. 6 mm 15.70 mm²;diam. 8 mm 21.24 mm²;diam.10 mm 26.79 mm²;diam.12 mm 31.40 mm²;Modulus of elasticity: 230,000 N/mm².Tensile strength: 4,830 N/mm².Elongation at failure: 2%.Packaging: 10 m rolls.

MapeWrap C FioccoCarbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin).

TECHNICAL DATA:Weight: 230-360 g/m².Equivalent thickness of dry fabric: 0.064-0.10 mm.Tensile strength (MPa): > 4.800, > 4.800.Tensile modulus of elasticity (GPa): 230-230.Width: 20-40 cm.Elongation at failure: 2.1%.Packaging: 50 m rolls.

MapeWrap C BI-AXBalanced, high-strength, bi-directional carbon fibre fabric.

TECHNICAL DATA:Weight: 400-600 g/m².Equivalent thickness of dry fabric: 0.143-0.214 mm.Tensile strength (N/mm²): > 4.840.Tensile modulus of elasticity (GPa): 89.Width: 40 cm.Elongation at failure: 2%.Packaging: 50 m rolls.

MapeWrap B UNI-AXUnidirectional, high strength basalt fibre fabric. The fibre is available in two weights with the same width.

165

TECHNICAL DATA:Type of fibre: E type glass.Diameters available: 6, 8, 10 and 12 mm.Equivalent surface area of dry fabric: diam. 6 mm 16.34 mm²;diam. 8 mm 21.45 mm²;diam. 10 mm 27.58 mm²;diam. 12 mm 32.69 mm².Modulus of elasticity: 80,700 N/mm².Tensile strength: 2,560 N/mm².Elongation at failure: > 3%.Packaging: 10 m rolls.

MapeWrap G FioccoGlass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin).

TECHNICAL DATA:Weight: 300-600 g/m².Equivalent thickness of dry fabric: 0.166-0.333 mm.Tensile strength: 4,830 N/mm².Tensile modulus of elasticity (GPa): 230.Elongation at failure: 2%.Width: 10 - 20 - 40 cm.Packaging: 50 m rolls.

MapeWrap C UNI-AXHigh-strength, unidirectional carbon fibre fabric with a high modulus of elasticity (230,000 N/mm²).A version with a very high modulus of elasticity (390,000 N/mm²) with the same weight and width is also available upon request, called MAPEWRAP C UNI-AX HM.

TECHNICAL DATA:Consistency: gel.Colour: milky white.Storage: 12 months (protect from freezing weather).Final hardening time: 24 hours.EMICODE: EC1 Plus - very low emissions.Consumption: 0.5-0.6 kg/m².Packaging: 6 kg drums.

MapeWrap EQ AdhesiveOne-component, ready-to-use, polyurethane-based adhesive in watery dispersion with very low emission level of volatile organic compounds (VOC) for impregnating MAPEWRAP EQ NET bi-directional, primed glass fibre fabric.

TECHNICAL DATA:Type of fibre: type E primed glass fibre.Weight: 285 g/m².Equivalent thickness of dry fabric: 0.057 mm.Tensile strength: > 1600 N/mm².Tensile modulus of elasticity: 42 GPa.Width: 100 cm.Elongation at failure: 4%.Packaging: 50 m rolls.

MapeWrap EQ NetBi-directional, primed glass fibre fabric to protect secondary partition walls in buildings from seismic activity.

NEW

NEW

NEW

NEW

166

TECHNICAL DATA:Type of fibre: metallic fibre.Weight (metallic fibres only): 2,100 g/m².Load-resistant area per unit of width: 373,80 m²/m.Tensile strength: > 2.845 N/mm².Tensile modulus of elasticity: 210,000 N/mm².Elongation at failure: > 2.6%.Width: 30 cm.Packaging: 25.00 m rolls.

MapeWrap S FabricUnidirectional, high-strength metal fibre fabric for structural strengthening.

TECHNICAL DATA:Mixing ratio: comp. A : comp. B = 3 : 1.Workability time: 90 minutes (at +23°C).Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate).Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs).Consumption: 250-300 g/m².Packaging:2 kg kits:– 1.5 kg drums (comp. A);– 0.5 kg drums (comp. B).

MapeWrap Primer 1Two-component epoxy primer specifically formulated for the MAPEWRAP system.


TECHNICAL DATA:Type of fibre: E type glass.Weight: 300-900 g/m².Equivalent thickness of dry fabric: 0.16-0.48 mm.Tensile strength: 2,560 N/mm².Tensile modulus of elasticity (GPa): 80.7.Elongation at failure: 3-4%.Width: 30-60 cm.Packaging: 50 m rolls.

MapeWrap G UNI-AXUnidirectional, high strength glass fibre fabric.

TECHNICAL DATA:Type of fibre: E type glass.Weight: 1140 g/m².Equivalent thickness of dry fabric: 0.1096 mm.Tensile strength (MPa): 2,600.Tensile modulus of elasticity (GPa): 73.Width: 30-48.5 cm.Elongation at failure: 3.5-4%.Packaging: 50 m rolls.

MapeWrap G QUADRI-AXBalanced, quadri-directional glass fibre fabric.

167

TECHNICAL DATA:Maximum dimension of aggregate: 1.5 mm.Mixing ratio: 1 25 kg comp. A with 1 drums of comp. B.Pot life of mix: approximately 1 hour (at +20°C).Thickness applied: from 3 to 10 mm per layer.Classification: EN 998-1 - type GP mortar, category CS IV and EN 998-2 - type G mortar, class M15.Storage: 12 months (comp. A); 24 months (comp. B).Application: gauging trowel, trowel or rendering machine.Consumption: approximately 1.9 kg/m² per mm of thickness.Packaging:30 kg kits:– 25 kg bags (comp. A);– 5 kg drums (comp. B).

Planitop HDM RestauroTwo-component, pre-blended, high-ductility hydraulic lime (NHL) and ECO-POZZOLAN-based light-coloured mortar, particularly recommended for “reinforced” structural strengthening of masonry substrates in combination with MAPEGRID G 120, MAPEGRID G 220 or MAPEGRID B 250 and for evening out stone, brickwork and tuff substrates.

TECHNICAL DATA:Maximum dimension of aggregate: 1 mm.Mixing ratio: 3.7 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B.Pot life of mix: approximately 1 hour (at +20°C).Maximum applicable thickness: 25 mm.Classification: EN 1504-3 - class R2 non-structural mortar.Storage: 12 months (comp. A); 24 months (comp. B).Application: gauging trowel, trowel or rendering machine.Consumption: approximately 1.85 kg/m² per mm of thickness.Packaging: 31.75 kg kits:– 25 kg vacuum-packed polyethylene bags (comp. A);– 6.25 kg drums (comp. B).

Planitop HDM MaxiTwo-component, high-ductility, pozzolan-reaction mortar applied in layers up to 25 mm thick for evening out stone, brickwork and tuff substrates before applying MAPEGRID G 120, MAPEGRID G 220 or MAPEGRID B 250.

TECHNICAL DATA:Maximum dimension of aggregate: 0.4 mm.Mixing ratio: 3.7 parts of PLANITOP HDM comp. A with 1 part of PLANITOP HDM comp. B.Pot life of mix: approximately 1 hour (at +20°C).Thickness applied: 2-3 mm per layer.Classification: EN 1504-2 - surface protection systems for concrete.EN 1504-3 - class R2 non-structural mortar.Storage: 12 months (comp. A); 24 months (comp. B).Application: gauging trowel, trowel or rendering machine.Consumption: approximately 1.8 kg/m² per mm of thickness.Packaging: 30.5 kg kits:– 24 kg vacuum-packed polyethylene bags (comp. A);– 6.5 kg drums (comp. B).

Planitop HDMTwo-component, high-ductility, pozzolan-reaction mortar applied in layers up to 6 mm thick for “reinforced” structural strengthening of masonry substrates in combination with MAPEGRID G 120, MAPEGRID G 220 or MAPEGRID B 250 and for smoothing and levelling surfaces in concrete, stone, brickwork and tuff.

TECHNICAL DATA:Type of fibre: high-strength carbon.Diameters available: 10 and 12 mm.Load-resistant area per unit of width: diam.10 mm 4,300 mm²/m;diam.12 mm 5,200 mm²/m.Maximum load per unit of width: diam.10 mm 8,969.8 kN/m;diam.12 mm 10,847.2 kN/m.Thickness: diam.10 mm 4.30 mm;diam.12 mm 5.20 mm.Modulus of elasticity: 210,000 N/mm².Tensile strength: 2,086 N/mm².Elongation at failure: > 2%.Packaging: 10 m rolls.

MapeWrap S FioccoHigh-strength, steel fibre cord for structural strengthening.

21.2 Strengthening masonry structures _____________________________________________________________


REPAIR MORTAR

R2EN 1504-3

EN 1504-3



EN 1504-2 (C)

MC-IRPRINCIPLES

EN 1504-2


REPAIR MORTAR

R2EN 1504-3

EN 1504-3

MASONRY MORTAR


G-M15EN 998-2

MASONRY MORTAR


G-M25EN 998-2

EN 998-2

EN 998-2



GP-CS IVEN 998-1

EN 998-1

PRODUCTS FOR THERMAL INSULATION

170

22. PRODUCTS FOR THERMAL INSULATION

TECHNICAL DATA:Composition: aluminium:Colour: grey.Sizes available mm: 40, 50, 60, 80 and 100.Dimensions m: 2.50.Packaging: packages of 20 pieces.

Mapetherm BaAluminium starting profiles with drip channel, available in sizes 40, 50, 60, 80 and 100 mm.

TECHNICAL DATA:Consistency: powder.Colour: grey and whiteDensity (g/cm³): 1.4.Application temperature range: from +5°C to +35°C.Mixing ratio: 21-24% with water (by weight).Cleaning: water.Storage: 12 months.Application: trowel.Consumption (kg/m²): – 4.0-6.0 kg/m² depending on bonding technique;– 1.35-1.55 kg/m² per mm of thickness when used as

smoothing compound (recommended: approx. 4 mm in 2 coats).

Packaging: 25 kg.

Mapetherm AR1 GGOne component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems.

ETA 10/0024ETA 10/0025

TECHNICAL DATA:Consistency: powder.Colour: grey.Density (g/cm³): 1.3.Application temperature range: from +5°C to +35°C.Mixing ratio: 21-24% with water (by weight).Cleaning: water.Storage: 12 months.Application: trowel.Consumption (kg/m²):– 4.0-6.0 kg/m² according to the bonding technique

used;– 1.3-1.5 per mm of thickness when used as

smoothing compound (recommended: approx. 4 mm in 2 coats).

Packaging: 25 kg.

Mapetherm AR1One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems.

ETA 04/0061ETA 10/0024ETA 10/0025

TECHNICAL DATA:Consistency: thick paste.Colour: white.Density (g/cm³): 1.5.Application temperature range: from +5°C to +35°C.Mixing ratio: 1 part of ADESILEX FIS13 with 0.7 parts of 42.5 cement (by weight).Cleaning: water.Storage: 24 months.Application: trowel.Consumption (kg/m²): – 1.8-3.2 depending on bonding technique;– 1-1.2 per mm of thickness for smoothing and

levelling.Packaging: 15 and 25 kg.

Adesilex FIS13Adhesive and smoothing and levelling compound in water dispersion mixed with cement for thermal insulation systems.

ETA 04/0061

171

TECHNICAL DATA:Composition: synthetic material with zinc-plated steel nail.Colour: grey.Sizes available mm: 108, 128, 148.Packaging: boxes of 100 pieces.

Mapetherm FIXStud for fixing insulating panels and composite insulating systems in place, with a plug with a metal/nylon pin and polypropylene body.

ETA 09/0394

TECHNICAL DATA:Composition: sintered expanded polystyrene.Colour: white.Thickness available mm: 40, 50, 60, 80 and, 100.Dimensions of panel mm: 1000 x 500.Packaging: from 3 to 7.5 m² (according to the thickness).

Mapetherm EPSExtruded sintered polystyrene insulating panels for thermal insulation systems.

ETA 10/0025

TECHNICAL DATA:Composition: expanded cork.Colour: brown.Thickness available mm: 40, 50, 60, 80 and 100.Dimensions of panel mm: 1000 x 500.Packaging: from 1.5 to 4 m² (according to the thickness).

Mapetherm CorkCork insulating panels for thermal insulation systems.

TECHNICAL DATA:Composition: PVC.Colour: white.Dimensions m: 2.50.Packaging: packs of 20 profiles.

Mapetherm Dripnose BeadPVC corner profile with drip channel and 10 cm wide alkali-resistant glass fibre mesh for door and window openings. May be used as a drip channel for balconies and projecting features.

NEW

172


TECHNICAL DATA:Composition: 100% glass fibre.Colour: white.Mesh size (mm): 4.15 x 3.8.Weight of primed mesh (g/m²): approx. 150.Storage: unlimited.Packaging: 50x1 m rolls.

Mapetherm NetAlkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems.

ETA 10/0024ETA 10/0025ETA 04/0061

TECHNICAL DATA:Composition: high density glass wool.Colour: yellow.Thickness available mm: 40, 50, 60, 80 and 100.Dimensions of panel mm: 1200 x 600.Packaging: from 2.88 to 7.2 m² (according to the thickness).

Mapetherm M. WoolHigh-density, glass wool insulating panels for thermal insulation systems.

ETA 10/0024

TECHNICAL DATA:Composition: nylon and zinc/chrome-plated steel.Colour: grey.Sizes available mm: 45.Packaging: boxes of 100 pieces.

Mapetherm FIX BNylon self-tapping studs in zinc/chrome-plated steel.

TECHNICAL DATA:Composition: polypropylene.Colour: grey.Sizes available mm: 83.Packaging: boxes of 500 pieces.

Mapetherm FIX 9Polyprpoylene fastener.

173

Mapetherm Profil BaPVC profile with drip channel and 10 cm wide alkali-resistant glass fibre mesh for MAPETHERM Ba starter profiles.



Mapetherm Profil EPVC profile with 10 cm wide alkali-resistant glass fibre mesh and a flexible membrane for flat expansion joints.


Mapetherm Profil VPVC profile with 10 cm wide alkali-resistant glass fibre mesh and a flexible membrane for corner expansion joints.

TECHNICAL DATA:Composition: aluminium:Colour: grey.Dimensions m: 2.50.Packaging: boxes of 100 pieces.

Mapetherm ProfilPre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre mesh.

NEW

NEW

NEW

174


TECHNICAL DATA:Composition: extruded polystyrene.Colour: blue.Thickness available mm: 40, 50, 60, 80 and 100.Dimensions of panel mm: 1200 x 600.Packaging: from 2.88 to 6.48 m² (according to the thickness).

Mapetherm XPSPolystyrene insulating panels for thermal insulation systems.

ETA 04/0061

TECHNICAL DATA:Composition: PVC.Colours: white.Dimensions m: 2.50.Packaging: packs of 30 profiles.

Mapetherm Profil WAdhesive PVC profile with 10 cm wide alkali-resistant glass fibre mesh and a flexible membrane for the inside edge of window openings.

NEW

PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS

178

23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS

TECHNICAL DATA:Consistency: fluid liquid.Colour: red.Density (EN ISO 2811-1) (g/cm³): approx. 1.08.Dry solids content: (EN ISO 3251) (%): approx. 50.Dilution rate: ready to use; 25% of water if applied by pump.Waiting time before applying other products: 1- 2 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or pump.Consumption (kg/m²): approx. 0.2-0.3.Packaging: 5, 10 and 25 kg.

Vinavil 03V Specially for asbestosTemporary encapsulation of asbestos-cement panels.

TECHNICAL DATA:Consistency: paste.Colour: grey and white.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 15.Dilution rate: 5-10% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush, trowel or spray.Consumption (kg/m²): approx. 0.4 (for one coat of the product).Packaging: 5, 10 and 25 kg.

AquaflexLiquid membrane used to form a permanent shell around asbestos cement and for flexible waterproofing membranes.

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 0.96.Dry solids content: (EN ISO 3251) (%): approx. 10.Dilution rate: ready to use; 30-40% of nitro thinners for surfaces with poor absorbency.Waiting time before applying other products: 6-8 hours.Application temperature range: from +5°C to +35°C.Cleaning: white spirit or nitro thinners.Storage: 24 months.Application: roller, brush or spray.Consumption (kg/m²): approx. 0.16.Packaging: 6 kg.

Primer for AquaflexSynthetic resin primer in solvent, specifically formulated for bitumen surfaces in asbestos cement and surfaces with unknown adherence properties.

WALL PROTECTIVE AND DECORATIVE COATINGS

182

24. WALL PROTECTIVE AND DECORATIVE COATINGS

TECHNICAL DATA:Consistency: thick liquid.Colour: colours from the colour chart range or other colours using the ColorMap® automatic colouring systemDensity (EN ISO 2811-1) (g/cm³): approx. 1.27.Dry solids content: (EN ISO 3251) (%): approx. 59.Dilution rate: 10-15% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.25-0.3 kg/m² (for two coats).Packaging: 20 kg.

Colorite BetonSemi-transparent, anti-carbonatation acrylic paint with a smooth finish for internal and external surfaces.

TECHNICAL DATA:Consistency: liquid.Colour: milky.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Active substance content (%): 8.Dilution rate: supplied ready to use.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.2-1 kg/m² (for one coat of the product, according to the absorbency of the substrate).Packaging: 2 and 10 kg.

Antipluviol WTransparent, silane and siloxane water-repellent impregnator in watery solution.

TECHNICAL DATA:Consistency: liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 0.8.Active substance content (%): 9.Dilution rate: supplied ready to use.Surface drying time: 1 hour.Application temperature range: from +5°C to +35°C.Cleaning: solvent (benzene, white spirit, etc.).Storage: 24 months.Application: roller, brush or spray.Consumption: 0.1-1 kg/m² (for one coat of the product, according to the absorbency of the substrate).Packaging: 5 and 10 kg.

Antipluviol SUltra high-performance, transparent, siloxane resin water-repellent impregnator.

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 1.02.Dry solids content: (EN ISO 3251) (%): approx. 5.Dilution rate: supplied ready to use.Surface drying time: 1-2 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.1-0.5 kg/m² (for one coat of the product, according to the absorbency of the substrate).Packaging: 5 and 25 kg.

AntipluviolHigh-performance, silicone water-repellent in watery solution for external walls.

Drop Effect



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

Drop Effect

Drop Effect

183

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.50.Dry solids content: (EN ISO 3251) (%): approx. 65.Dilution rate: 15-20% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.3-0.4 kg/m² (for two coats of the product).Packaging: 5 and 20 kg.

DursiliteWashable water-based paint with low dirt pick-up for internal walls.

TECHNICAL DATA:Consistency: component A fluid paste, component B fluid paste.Colour: component A beige, component B black.Density (g/cm³): component A 1.75, component B 1.40.Dry solids content: (EN ISO 3251) (%): component A 100, component B 1.00.Dilution rate: ready to use.Complete hardening time: 7 days.Application temperature range: from +5°C to +30°C.Cleaning: nitro solvent or white spirit.Storage: 12 months.Application: roller, brush or spray.Consumption: 0.4-0.5 kg/m² (for one coat of the product).Packaging: 10 kg kits (A + B).

Duresil EBTwo-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces.


Colorite PerformanceProtective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colours.


Colorite MattHighly-transpirant water-based paint for internal and external use with excellent hiding power.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

PI-MC-RC-IR


PRINCIPLES


EN 1504-2

184


TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 0.96.Dry solids content: (EN ISO 3251) (%): approx. 10.Dilution rate: ready to use; 30-40% of nitro thinners for surfaces with poor absorbency.Waiting time before applying other products: 6-8 hours.Application temperature range: from +5°C to +35°C.Cleaning: white spirit or nitro thinners.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.10-0.15 kg/m².Packaging: 10 kg.

Elastocolor PrimerSolvent-based high-penetration consolidating primer to even out surfaces.

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.37.Dry solids content: (EN ISO 3251) (%): approx. 63.Dilution rate: 10-15% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.2-0.4 kg/m² (for one coat of the product).Packaging: 20 kg.

Elastocolor PaintElastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces.

TECHNICAL DATA:Composition: 100% glass fibre.Colour: white.Mesh size (mm): 2.7 x 2.7.Weight of primed mesh (g/m²): approx. 61.Storage: unlimited.Packaging: 50x1 m rolls.

Elastocolor NetAlkali-resistant glass fibre mesh for reinforcing ELASTOCOLOR RASANTE and ELASTOCOLOR RASANTE SF.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

TECHNICAL DATA:Consistency: thick liquid.Colours: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.60.Dry solids content (EN ISO 3251) (%): approx. 65.Dilution rate: 15-20% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: waterStorage: 24 months.Application: brush, roller or spray.Consumption: 0.3-0.4 kg/m² (for two coats of product).Packaging: 5 and 20 kg.

Dursilite MattTranspirant, high opacity, washable water-based wall paint for internal use.

NEW

185

TECHNICAL DATA:Consistency: thick liquid.Colour: colours from the colour chart range using the ColorMap® automatic colouring systemDensity (EN ISO 2811-1) (g/cm³): approx. 1.18.Dry solids content: (EN ISO 3251) (%): approx. 59.Dilution rate: as is or diluted with 5-10% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller or brush.Consumption: – 0,3-0,5 kg/m² (for two coats of the product) for

structures which are not immersed in water;– 0,6-0,8 kg/m² (for two/three coats of the product) for

structures which are immersed in water.Packaging: 20 kg.

Elastocolor WaterproofWaterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water.

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.47.Dry solids content: (EN ISO 3251) (%): approx. 77.Dilution rate: as is or diluted with 5% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: trowel, roller, brush or spray.Consumption: – trowel: 700-800 g/m² per coat;– brush or roller: approx. 500 g/m² per coat;– spray 800-1000 g/m² per coat.Packaging: 20 kg.

TECHNICAL DATA:Consistency: paste.Colours: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.70.Dry solids content (EN ISO 3251) (%): approx. 80.Dilution rate: ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: trowel.Consumption: 1.2 mm: 1.9-2.3 kg/m².Packaging: 20 kg.

Elastocolor Rasante SFFibre-reinforced elastomeric, thick-layered finishing product with high filling properties, for internal and external surfaces.

Elastocolor Tonachino PlusElastic, water-repellent, anti-mildew and anti-mould, hygienising, elastomeric coating product for internal and external surfaces.Available in the following grain sizes: 1.2 mm.

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.35.Dry solids content: (EN ISO 3251) (%): approx. 67.Dilution rate: as is or diluted with 5% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush, trowel or spray.Consumption: – trowel: 300-400 g/m² per coat;– brush or roller: approx. 400 g/m² per coat;– spray 400-700 g/m² per coat.Packaging: 20 kg.

Elastocolor RasanteFibre-reinforced, elastomeric, high flexibility finishing product with good defect covering capacity, for internal and external applications.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

DropEffectNEW

186


TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.68.Dry solids content: (EN ISO 3251) (%): approx. 65.Dilution rate: as is or diluted with 5% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.3-0.5 kg/m² (for one coat of the product).Packaging: 20 kg.

Quarzolite Base CoatColoured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces.

ETA 10/0024ETA 10/0025

TECHNICAL DATA:Consistency: component A fluid paste, component B thick paste.Colour: component A transparent, component B white or grey.Density (EN ISO 2811-1) (g/cm³): component A 1.1, component B 1.4.Dilution rate: supplied ready to use.Waiting time between each coat: 6-24 hours.Complete hardening time: 8-10 days.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: roller, brush or spray.Consumption: 0.25-0.3 kg/m² (for one coat of the product).Packaging: 20 kg kits (A + B).

Mapecoat WTwo-component, epoxy paint in water dispersion for protecting cementitious substrates.

PI-MC-PR-RC-IR


PRINCIPLES


EN 1504-2

TECHNICAL DATA:Consistency: component A thick paste, component B fluid paste.Colour: component A white, component B transparent.Density (EN ISO 2811-1) (g/cm³): component A 1.43, component B 1.003.Dilution rate: supplied ready to use.Waiting time between each coat: 6-24 hours.Complete hardening time: 7 days.Application temperature range: from +5°C to +30°C.Cleaning: ethanol.Storage: 24 months.Application: roller, brush or spray.Consumption (kg/m²): 0.4-0.6 (per coat).Packaging: 5 kg kits (A + B).

Mapecoat DW 25Two-component epoxy paint used to form a coating for use on concrete surfaces that are in contact with drinking water and foodstuffs.

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 15.Application: roller, brush or spray.Dilution rate: ready to use; 30-35% of water for surfaces with low absorbency.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Consumption: 0.10-0.15 kg/m².Cleaning: water.Storage: 24 months.Application: brush, roller or spray.Consumption: 0,10-0,15 kg/m².Packaging: 2 and 10 kg.

MalechAcrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

187

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.85 (according to the grain size).Dry solids content: (EN ISO 3251) (%): approx. 85.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: stainless steel or plastic float.Consumption: – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m².Packaging: 20 kg.

Quarzolite Tonachino PlusHigh-protection, mould and mildew-resistant acrylic coating product with good sanitising properties, for internal and external surfaces.Available in the following granulometries: 1.2 mm and 1.5 mm.

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size).Dry solids content: (EN ISO 3251) (%): approx. 85.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: stainless steel or plastic float.Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m²; – 2.0 mm: 2.6-3.0 kg/m².Packaging: 20 kg.

Quarzolite TonachinoHigh-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces.Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.

ETA 10/0024ETA 10/0025


Quarzolite PaintAcrylic paint with micro-granular quartz with a smooth finish for long-lasting protection of internal and external surfaces.


Quarzolite GraffiatoHighly protective acrylic scratch-effect coating product for evening out surface defects on internal and external surfaces.Available in the following granulometries: 1.2 mm and 1.8 mm.

ETA 10/0024ETA 10/0025

EN 15824

V2 W3A2-s1 d0


EXTERNAL AND INTERNAL PLASTERSBASED ON ORGANIC BINDERS

EN 15824

EN 15824

V2 W3A2-s1 d0



EN 15824

EN 15824

V2 W3A2-s1 d0



EN 15824

188


TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): //.Dilution rate: 300% of water.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: manual spray or brush.Consumption: 0.2-1 kg/m² (ready-to-use solution).Packaging: 1 and 5 kg.

Silancolor Cleaner PlusHygienising detergent in watery solution.

DropEffect

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.68.Dry solids content: (EN ISO 3251) (%): approx. 66.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.3-0.5 kg/m² (for one coat of the product).Packaging: 20 kg.

Silancolor Base CoatWater-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces.

ETA 10/0024ETA 10/0025

EN 15824

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.55.Dry solids content (EN ISO 3251-1) (%): approx. 66.Dilution rate: 10-15% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.2-0.4 kg/m² (for two coats of the product).Packaging: 20 kg.

Silancolor AC PaintWater-repellent acrylic-siloxane paint with high resistance to UV rays for internal and external surfaces.

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.70.Dry solids content (EN ISO 3251-1) (%): approx. 80.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: stainless steel or plastic float.Consumption: 1.2 mm: 1.9-2.3 kg/m².Packaging: 20 kg.

Silancolor AC TonachinoWater-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces.Available in the following granulometries: 1.2 mm.

V1 W3A2-s1 d0



EN 15824

189

TECHNICAL DATA:Consistency: fluid liquid.Colour: milky.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 12.Dilution rate: supplied ready to use.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.1-0.15 kg/m².Packaging: 10 kg.

Silancolor PrimerTranspirant siloxane undercoat with a smooth finish.


Silancolor Paint PlusTranspirant, water-repellent, anti-mildew and mould hygienising siloxane paint for internal and external surfaces.


Silancolor PaintTranspirant, water-repellent, siloxane paint resistant to aggressive environments for internal and external surfaces.


Silancolor GraffiatoTranspirant, water-repellent, scratch-effect siloxane coating product with good defect covering properties for internal and external surfaces.Available in the following granulometries: 1.2 mm and 1.8 mm.

ETA 10/0024ETA 10/0025

DropEffect

EN 15824

V1 W2A2-s1 d0



EN 15824

Drop Effect

Drop Effect

190


TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.61.Dry solids content: (EN ISO 3251) (%): approx. 66.Dilution rate: as is or 5% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: roller, brush or spray.Consumption (kg/m²): 0.3-0.5 (for one coat of the product).Packaging: 20 kg.

Silexcolor Base CoatTranspirant, coloured silicate undercoat with a smooth finish and good filling properties for internal and external surfaces, according to DIN 18363 Standards.

ETA 10/0024ETA 10/0025


Silancolor Tonachino PlusTranspirant, water-repellent, anti-mildew and mould siloxane hygienising and coating product for internal and external surfaces.Available in the following granulometries: 0.7 mm and 1.2 mm.

EN 15824

EN 15824

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size).Dry solids content: (EN ISO 3251) (%): approx. 80.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: stainless steel or plastic float.Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m²; – 2.0 mm: 2.6-3.0 kg/m².Packaging: 20 kg.

Silancolor TonachinoTranspirant, water-repellent, thick-layered siloxane coating product with high filling properties for internal and external surfaces.Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.

ETA 10/0024ETA 10/0025

TECHNICAL DATA:Consistency: fluid liquid.Colour: milky.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 5.Dilution rate: supplied ready to use.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush or spray.Consumption: 0.1-0.3 kg/m².Packaging: 2 and 10 kg.

Silancolor Primer PlusSilane and siloxane, anti-mildew and mould insulating undercoat in water emulsion.

DropEffect

V1 W3A2-s1 d0



EN 15824

V1 W3A2-s1 d0



EN 15824

DropEffect

Drop Effect

191

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 0.9.Dry solids content: (EN ISO 3251) (%): approx. 14.Dilution rate: supplied ready to use.Waiting time before applying other products: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: roller, brush or spray.Consumption: 0.1-0.15 kg/m².Packaging: 10 kg.

Silexcolor PrimerHighly transpirant silicate undercoat with a smooth finish, according to DIN 18363 Standards.

ETA 04/0061

TECHNICAL DATA:Consistency: thick liquid.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.46.Dry solids content: (EN ISO 3251) (%): approx. 55.Dilution rate: 20% of SILEXCOLOR PRIMER.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: roller, brush or spray.Consumption: 0.35-0.45 kg/m² (for two coats of the product).Packaging: 20 kg.

Silexcolor PaintHighly-transpirant silicate paint with a high chemical bond for internal and external surfaces, according to DIN 18363 Standards.

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.61.Dry solids content: (EN ISO 3251) (%): approx. 67.Dilution rate: supplied ready to use.Waiting time between each coat: 12 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: trowel.Consumption: 0.8-1.0 kg/m² (according to the type of finish required).Packaging: 5 and 20 kg.

Silexcolor MarmorinoHighly-decorative, fine-grained, silicate mineral coating product in paste form with high chemical resistance for internal and external surfaces, according to DIN 18363 Standards.


Silexcolor GraffiatoHighly transpirant, scratch-effect silicate coating product with defect-covering properties for internal and external surfaces, according to DIN 18363 Standards.Available in the following granulometries: 1.2 mm and 1.8 mm.

ETA 10/0024ETA 10/0025

EN 15824

V1 W2A2-s1 d0



EN 15824

192


TECHNICAL DATA:Consistency: liquid gel.Colour: straw yellow.Density (EN ISO 2811-1) (g/cm³): approx. 0.85.Application: brush.Dilution rate: supplied ready to use.Usage time: approx. 20 minutes.Application temperature range: from +5°C to +35°C.Consumption: 0.1-0.2 kg/m².Cleaning: water.Storage: 12 months.Packaging: 5 kg.

WallGard Graffiti Remover GelThixotropic detergent for cleaning surfaces damaged by graffiti.

TECHNICAL DATA:Consistency: fluid liquid.Colour: white.Density (EN ISO 2811-1) (g/cm³): approx. 0.98.Dry solids content: (EN ISO 3251) (%): approx. 14.Dilution rate: supplied ready to use.Drying time: approx. 20 minutes.Application temperature range: from +5°C to +35°CCleaning: water.Storage: 12 months.Application: roller, brush or spray.Consumption: 0.05-0.15 kg/m².Packaging: 5 and 20 kg.

WallGard Graffiti BarrierAnti-graffiti protective barrier.

TECHNICAL DATA:Consistency: paste.Colour: white or various colours using the ColorMap® automatic colouring system.Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size).Dry solids content: (EN ISO 3251) (%): approx. 80.Dilution rate: supplied ready to use.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 12 months.Application: stainless steel or plastic float.Consumption: 0.7 mm: 1.7-2.0 kg/m²; 1.2 mm: 1.9-2.3 kg/m²; 1.5 mm: 2.2-2.6 kg/m²; 2.0 mm: 2.6-3.0 kg/m².Packaging: 20 kg.

Silexcolor TonachinoHighly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces.Available in the following granulometries: 0.7 mm,1.2 mm, 1.5 mm and 2.0 mm.

ETA 04/0061ETA 10/0024ETA 10/0025

EN 15824

V1 W2A2-s1 d0



EN 15824

WATERPROOFING SYSTEMS

196

TECHNICAL DATA:Consistency: comp A (liquid), comp B (liquid), comp C (solid).Viscosity of mix (mPa·s): < 5.Storage: 12 months at a temperature of between +10°C and +30°C.Mixing ratio: comp A: (comp B/water) : comp C (weight) = 20 : (1/20) : 0.3.Consumption:approximately 1 kg/l (of cavities to be filled).Packaging: 21.3 kg kits: – comp A 20 kg;– comp B 1 kg;– comp C 0.3 kg.

Mapegel 50Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers.

TECHNICAL DATA:Consistency: fine powder.Workability time at 20°C: approximately 1 minute.Storage: 12 months.Mixing ratio: 100 g of LAMPOSILEX with 28 g of water.Minimum application temperature: +5°C.Consumption: 1.8 kg/dm³ of cavities to be filled.Packaging: 5 kg drums.

LamposilexUltra quick-setting and hardening hydraulic binder for blocking seeping water.

TECHNICAL DATA:Consistency: powder.Pot life of mix: approximately 1 hour.Classification: EN 1504-2.Storage: 12 months.Consumption: 1.6 kg/m² per mm of thickness.It is advised:- for slight moisture penetration: 2 - 3 kg/m²;- for water retaining structures of reservoirs: 4 - 4.5

kg/m²;- for retaining water with a pressure of up to 1 bar:

6 -7 kg/m².Packaging: 25 kg bags.

Idrosilex ProntoOsmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures.

TECHNICAL DATA:Consistency: powder or liquid.Pot life of mix: approximately 1 hour.Storage: 12 months.Consumption:– IDROSILEX LIQUID: 3-5 kg/m² every 100 kg of

cement;– IDROSILEX POWDER: 2-4 kg/m² every 100 kg of

cement.Packaging: – IDROSILEX LIQUID: 6 and 25 kg drums;– IDROSILEX POWDER: boxes of 25x1 kg.

IdrosilexBulk powder or liquid water-repellent for cementitious mortar.

25. WATERPROOFING SYSTEMS

25.1 Waterproofing structures below ground level ____________________________________________________



EN 1504-2 (C)

MC-IRPRINCIPLES

197

TECHNICAL DATA:Lower layer of geo-textile fabric: polypropylene fabric, 140 g/m².Upper layer of geo-textile fabric: non-woven polypropylene fabric, 220 g/m².Layer of bentonite: natural sodium.Aeric mass of bentonite (EN 14196) (12% humidity): 5.1 kg/m².Swelling index (ASTM D 5890): 27 ml/2 g.Coefficient of permeability (ASTM D 5887): < 1E-11 m/s.Static perforation (EN ISO 12236): 2400 N (-50 N).Longitudinal tensile strength (EN ISO 10319): > 14.0 kN/m (-0.5 kN/m).Transversal tensile strength (EN ISO 10319): > 14.0 kN/m (-0.5 kN/m).Peeling (ASTM D 6496): > 420 N/m.Bond strength to concrete (ASTM D 903): > 3.5 N/mm.Thickness of product (EN 964-1): 6.0 mm.Seal of overlaps: the geo-composite product is self-sealing.Packaging: 1.1 m x 5 m rolls;2.5 m x 22.5 m rolls;5 m x 40 m rolls.

MapeproofBentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces.

TECHNICAL DATA:Consistency: thixotropic.Mixing ratio: comp. A: comp. B = 2.2 : 1.Pot life of mix: approximately 1 hour (at +20°C).Application temperature range: from +5°C to +40°C.Minimum applicable thickness: 2 mm in 2 coats.Classification: EN 1504-2 - coating (C) principles PI, MC and IR.Storage: 12 months.Application: roller or spray.Consumption: – by roller: 1.65 kg/m² per mm of thickness;– by spray: 2.2 kg/m² per mm of thickness.Packaging: 32 kg kits:component A: 22 kg bags;component B: 10 kg drums.

Mapelastic FoundationTwo-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

EN 1504-2

1213-CPD-4489

TECHNICAL DATA:Lower layer of geo-textile fabric: polypropylene fabric, 120 g/m². Upper layer of geo-textile fabric: non-woven polypropylene fabric, 220 g/m².Layer of bentonite: natural sodium.Aeric mass of bentonite (EN 14196) (12% humidity): 4.1 kg/m².Swelling index (ASTM D 5890): 27 ml/2 g.Coefficient of permeability (ASTM D 5887): < 1E-11 m/s.Static perforation (EN ISO 12236): 1800 N (-50 N).Longitudinal tensile strength (EN ISO 10319): > 12.0 kN/m (-0.5 kN/m).Transversal tensile strength (EN ISO 10319): > 12.0 kN/m (-0.5 kN/m).Peeling (ASTM D 6496): > 385 N/m.Bond strength to concrete (ASTM D 903): > 2.7 N/mm.Thickness of product (EN 964-1): 5.0 mm.Seal of overlaps: the geo-composite product is self-sealing.Packaging: – 2.5 m x 22.5 m rolls; – 5 m x 40 m rolls.

Mapeproof LWBentonite waterproofing sheets for use on horizontal and vertical structures below ground level with a maximum water table of 5 metres.

TECHNICAL DATA:Packaging: boxes of 500 pieces.

Mapeproof CDWashers used to fasten MAPEPROOF bentonite sheets in place.

1213-CPD-4489

198


TECHNICAL DATA:Consistency: thick paste.Density: 1.2 g/cm³.pH: 10.Dry solids content: 75%.Storage: 24 months.Mixing ratio of first coat (primer): dilute PLASTIMUL with 45-50% of water.Drying time: 3-6 hours.Mixing ratio of second reinforced layer (thickness 3 mm): neat PLASTIMUL.Minimum application temperature: +5°C.Packaging: 12 and 30 kg drums.

PlastimulBitumen waterproofing emulsion for general purpose use.

TECHNICAL DATA:Consistency: thixotropic paste.Solubility: non-soluble in water.Dry solids content: 90%.Storage: 12 months.Application temperature range: from +5°C to +40°C.Volumetric expansion in water: minimum 100%.Formation of skin: 180-200 min.Polymerisation time: 2 mm every 9 hours.Consumption: approximately 320 ml every 3 metres.Shore A hardness (DIN 53505): 32.Elongation (DIN 53504): > 700%.Ultimate strength (DIN 53504): 2.5 N/mm².Modulus of elasticity at 100% elongation (DIN 53504): 0.55 N/mm².Tear strength (ISO 34-1): 10 N/mm.Water-tightness: 1 atm.Packaging: boxes containing 6 320 ml cartridges.

Mapeproof SwellHydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol.

TECHNICAL DATA:Montmorillonite (XRD): > 95%.Free swelling (ASTM D 5890): > 27 ml/2 g.Fluid loss (ASTM D 5891): < 18 ml.Absorption of methylene blue: > 400 mg/g.Liquidity limit (UNI 10040): > 550%.Water absorption (ASTM E 946/43): > 750%1500/1000 Marsh viscosity: 38-40”.pH of filtered water: 9.Packaging: 25 kg paper bags.

Mapeproof SealNatural sodium bentonite in powder form for localised strengthening of waterproofing layers made using MAPEPROOF bentonite sheets.

TECHNICAL DATA:Density: 1.50 kg/dm³.Composition: – 50% natural sodium bentonite:– 50% non-toxic plasticising agents.Behaviour in water: the bentonite hydrates freely and swells.Behaviour in air: does not dry.Packaging: 15 kg drums.

Mapeproof MasticBentonite paste made from natural sodium bentonite and plasticising additives for sealing elements which pass through surfaces.

199

TECHNICAL DATA:Consistency: pasteDensity: 1.20 g./cm³.pH: 10.Dry solids content: 66%.Storage: 12 months.Application temperature range: from +5°C to +30°C.Mixing ratio: comp A : comp B = 22 : 8.Workability time: 2 hours.Drying time: approximately 1-2 days.Resistance to water: approx. 2 days.Resistance to rain: after approx. 4 hours.Resistance to heat (DIN 52123): ≥ 70°C.Crack-bridging according to DIN 28052: ≥ 2 mm at +4°C.Consumption: 1.2 kg/m² per mm of thickness of fresh product according to the type of substrate.Packaging: 30 kg units (A+B = 22+8).

Plastimul 2K PlusTwo-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres.

TECHNICAL DATA:Consistency: paste.Density: 0.65 g/cm³.pH: 10.Dry solids content: 60%.Storage: 12 months.Application temperature range: from +5°C to +30°C.Drying time: approximately 2 days.Resistance to water: after complete hardening approx. 2 days.Resistance to rain: after approx. 4 hours.Resistance to heat (DIN 52123): ≥ 70°C.Crack-bridging according to DIN 28052: ≥ 2 mm at +4°C.Consumption: 0.65 kg/m² per mm of thickness of fresh product according to the type of substrate.Packaging: 19.5 kg drums.

Plastimul 1K Super PlusMono-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres and rubber granules.

TECHNICAL DATA:Consistency: paste.Density: 0.75 g/cm³.pH: 10.Dry solids content: 66%.Storage: 12 months.Application temperature range: from +5°C to +30°C.Mixing ratio: comp A: comp B = 4 : 1.Workability time: 3 hours.Drying time: approximately 1-2 days.Resistance to water: approx. 2 days.Resistance to rain: after approx. 4 hours.Resistance to heat (DIN 52123): ≥ 70°C.Crack-bridging according to DIN 28052: ≥ 2 mm at +4°C.Consumption: 0.75 kg/m² per mm of thickness of fresh product according to the type of substrate.Packaging: 22 kg units (A+B = 17.6 + 4.4).

Plastimul 2K SuperTwo-component, solvent-free, quick-drying, low-shrinkage, high-flexibility bitumen waterproofing emulsion containing polystyrene spheres.

TECHNICAL DATA:Consistency: liquid.Mixing ratio: A:B=10:1.Density comp. A: 1 kg/dm³.pH comp. A: 11.5-12.5.pH comp. B: 6.5-8.5.Storage: 6 months.Application temperature range: from +5°C to +30°C.Resistance to rain (DIN 52461): immediate.Complete drying time: approx. 2 days.Resistance to water (DIN EN ISO 2812-2): no discolouring of the water or visible change to the film.Resistance to heat (DIN 52123): ≥ +70°C.Crack-bridging at 4°C (DIN 28052-6): ≥ 2 mm.Elongation at failure (DIN 53504): > 800%.Consumption: 1 kg/m² per mm of thickness.Packaging:Component A: 30 kg drums and 1000 kg tanks;Component B: 25 kg canisters.

Plastimul 2K ReactiveTwo-component, solvent-free, eco-compatible, highly-flexible, rapid-drying, instant bitumen waterproofing emulsion, applied by airless spray.

NEW

200

Plastimul PrimerSolvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range.

TECHNICAL DATA:Consistency: thixotropic liquid.Density: 1 g/cm³.pH: 10.Dry solids content: 30%.Storage: 12 months.Application temperature range: from +5°C to +30°C (temperature of substrate).Condition of substrate: dry, slightly damp.Application of coating products: after hardening.Consumption: 0.2-0.3 kg/m².Packaging: 30 kg drums.

TECHNICAL DATA:Mixing ratio: resin: catalyst = 1: 0.1-0.2 in weight.Storage: 6 months.Application: injection.Consumption: In the open air, a mixture of 1 kg of RESFOAM 1 KM (resin) + 0.1 kg of RESFOAM 1 KM AKS (catalyser) forms 50 litres of foam upon contact with 0.1 litre of water.Packaging:– RESFOAM 1 KM (resin): 20 kg plastic drums.– RESFOAM 1 KM AKS (catalyser): 1 kg plastic drums.

Resfoam 1 KMOne-component, super-fluid polyurethane resin applied by injection for waterproofing concrete and masonry structures and ground and rocks subject to intense percolating water. The setting time may be regulated.

TECHNICAL DATA:Consistency: paste.Colour: grey and white.Density (EN ISO 2811-1) (g/cm³): approx. 1.01.Dry solids content: (EN ISO 3251) (%): approx. 15.Dilution rate: 5-10% of water.Waiting time between each coat: 24 hours.Application temperature range: from +5°C to +35°C.Cleaning: water.Storage: 24 months.Application: roller, brush, trowel or spray.Consumption (kg/m²): approx. 0.4 (for one coat of the product).Packaging: 5, 10 and 25 kg.

AquaflexLiquid membrane used to form a permanent shell around asbestos cement and for flexible waterproofing membranes.

TECHNICAL DATA:Consistency: fluid liquid.Colour: transparent.Density (EN ISO 2811-1) (g/cm³): approx. 0.96.Dry solids content: (EN ISO 3251) (%): approx. 10.Dilution rate: ready to use; 30-40% of nitro thinners for surfaces with poor absorbency.Waiting time before applying other products: 6-8 hours.Application temperature range: from +5°C to +35°C.Cleaning: white spirit or nitro thinners.Storage: 24 months.Application: roller, brush or spray.Consumption (kg/m²): approx. 0.16.Packaging: 6 kg.

Primer for AquaflexSynthetic resin primer in solvent, specifically formulated for bitumen surfaces in asbestos cement and surfaces with unknown adherence properties.


25.2 Waterproofing structures above ground level ____________________________________________________

201

TECHNICAL DATA:Consistency: paste.Application temperature range: from +5°C to +35°C.Waiting time between first and second coat: approximately 8 hours.Set to foot traffic: 12 hours at +23°C.Minimum applicable thickness: 1 mm in 2 coats.Colour: white, grey, brick red and oxide red.Storage: 24 months.Application: roller, brush or spatula.Consumption: 1.3 kg/m² per mm of thickness.Packaging: 5 kg drums.

Aquaflex RoofReady-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces.

TECHNICAL DATA:Consistency: paste.Application temperature range: from +5°C to +35°C.Waiting time between first and second coat: 8-12 hours.Set to foot traffic: 12 hours at +23°C.Colours: high-reflectance white.Storage: 24 months.Application: roller, brush or trowel.Consumption:– 1.3 kg/m² per mm of thickness on cementitious

substrates;– 0.9 kg/m² for two coats on bituminous substrates.Packaging: 20 kg drums.

Aquaflex Roof HRFibre-filled liquid membrane in water emulsion with high solar reflectance and thermal emittance with a solar reflectance index (SRI) of 105.

TECHNICAL DATA:Colour: ivory and copper.Packaging: boxes of 5 pieces.

Drain FrontTPE angular pipe union for terraces and balconies.

TECHNICAL DATA:Diameter: 50, 70 and 100 mm.Packaging: 1 kg kits including:– vertical or lateral polypropylene drain-pipe

available in 3 diameters (50, 75 and 90 mm) for DRAIN LATERAL and 5 diameters (50-75-82-90-100 mm) for DRAIN VERTICAL, with a welded 400x400 mm polypropylene drain-cover;

– telescopic extension;– “anti-odour” plug;– removable stainless steel grate.

Drain Vertical/Drain LateralKit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc.

NEW

202


TECHNICAL DATA:Consistency: paste.Application temperature range: from +5°C to +35°C at +23°C and 50% R.H..Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.).Waiting time before laying coating: 3-4 hours (at +23°C and 50% R.H.)..Minimum applicable thickness: 0.8 mm in 2 coats.Storage: 24 months.Application: roller, brush or trowel.Consumption: 1.3 kg/m² per mm of thickness.Packaging: 15 kg drums.

Mapelastic AquaDefenseReady-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces.

TECHNICAL DATA:Consistency of mix: plastic-trowable.Mixing ratio: comp. A: comp. B = 3 : 1.Pot life of mix: approximately 1 hour.Application temperature range: from +5°C to +40°C.Minimum applicable thickness: 2 mm in 2 coats.Classification: EN 1504-2 - coating (C) principles PI, MC and IR.Storage: 12 months.Application: trowel or by spray.Consumption: – trowel: 1.7 kg/m² per mm of thickness;– spray: 2.2 kg/m² per mm of thickness.Packaging: 32 kg units: Comp. A: 24 kg bags + Comp. B: 8 kg drums.

MapelasticTwo-component, flexible cementitious coating for the protection and waterproofing of concrete surfaces, balconies, terraces, bathrooms, showers and swimming pools.

TECHNICAL DATA:Consistency: creamy paste.Density of the mix: 1500 kg/m³.Storage: 12 months.Application temperature range: from +5°C to +35°C.Hardening time for a 2 mm thick layer: 12 hours.Waiting time before laying ceramic tiles: 12-24 hours.Set to light foot traffic: 12-24 hours.Tensile strength: 1.6 N/mm².Elongation at failure: 140%.Tear strength: 10.5 N/mm.In service temperature range: from -20°C to +70°C.Resistance to 5% lactic acid solution: excellent.Resistance to 5% acetic acid solution: excellent.Resistance to 5% hydrochloric acid solution: excellent.Resistance to 3% potassium hydroxide solution: excellent.Consumption: 1.4 kg/m² per mm of thickness.Packaging: 15 kg aluminium bags contained in plastic drums.

Mapegum PU 1KOne-component, solvent-free, flexible polyurethane membrane for flexible waterproofing coats and bonds for new ceramic floors on new and old balconies and terraces without removing the old ceramic coating.

TECHNICAL DATA:Consistency: paste.Density of the mix: 1.45 g/cm³.pH: 9.Dry solids content: 75%.Storage: 24 months.Minimum filming temperature: +5°C.Application temperature range: from +5°C to +35°C.Time for complete drying of a 2 mm thick layer: 5 hours at 23°CTime for complete drying of a 2 mm thick layer: 12 hours at 5°C.Waiting time before laying coating: 12-24 hours.Resistance to temperature variations: excellent.Resistance to ageing: excellent.Resistance to solvents and oils: fair.Resistance to acids and alkalis: fair.In service temperature range: from -30°C to +100°C.Consumption: 1.5 kg/m² per mm of thickness.Packaging: 5, 10 and 25 kg drums.

Mapegum WPSQuick-drying flexible liquid membrane for waterproofing internal surfaces.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

203

TECHNICAL DATA:Consistency of mix: fluid, may be applied by brushMixing ratio: comp. A: comp. B = 2 : 1.Pot life of mix: approximately 1 hour.Application temperature range: from +5°C to +40°C.Minimum applicable thickness: 2 mm in 2 coats.Classification: EN 1504-2 - coating (C) principles PI, MC and IR.Storage: 12 months.Application: brush, roller or spray.Consumption: – brush or roller: 1.6 kg/m² per mm of thickness;– spray: dependent upon site conditions and trials.Packaging: 30 kg units: Comp. A: 20 kg bags + Comp. B: 10 kg drums.

Mapelastic SmartTwo-component, highly flexible cementitious coating, to be applied by brush, roller or spray for waterproofing concrete surfaces such as foundations, retaining walls, balconies, terraces, basins and swimming pools and for protection against aggressive chemical agents.

TECHNICAL DATA:Consistency of mix: plastic-trowable.Dry solids content: 100%.Storage: 12 months.Mixing water: 31-33%.Pot life of mix: approximately 1 hour.Application temperature range: from +5°C to +35°C.Minimum thickness per coat: 1 mm.Maximum thickness per coat: 2 mm.Consumption: 1.1 kg/m² per mm of thickness.Packaging: 20 kg vacuum-packed polyethylene bags.

MonolasticOne-component cementitious waterproofing mortar.

TECHNICAL DATA:Weight: 80 g/m².Thickness: 0.6 mm.Tensile strength: 5 KN/m.Deformation at maximum strain:– 90% in a longitudinal direction;– 60% in a transversal direction.Packaging: 25 m x 1 m rolls.

Mapetex SelMacro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes.

TECHNICAL DATA:Colour: blue.Weight: 150 g/m² ± 5%.Mesh size: 4x4.5 mm.Storage: unlimited.Packaging: 50 m x 1 m rolls.

Mapenet 150Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.



EN 1504-2 (C)

PI-MC-IRPRINCIPLES

204


TECHNICAL DATA:A/B ratio (by volume): 100/100.Mechanical characteristics (after 7 days at +23°C):– tensile strength (DIN 53504) (N/mm²): 25.3;– elongation at failure (DIN 53504) (%): 350;– tear strength (ISO 34-1) (N/mm): 96;– shore A hardness (DIN 53505): 90;– glass transition temperature (°C): -46.Application: by spray with a high-pressure bi-mixer pump.Consumption: 2 kg/m² per 2 mm of thickness.Packaging:– component A: 220 kg drums;– component B: 225 kg drums.

Purtop 1000Two-component, solvent-free, polyurethane membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site for storage tanks, basins and hydraulic works in general.

TECHNICAL DATA:A/B ratio (by volume): 100/88.Mechanical characteristics (after 7 days at +23°C):– tensile strength (DIN 53504) (N/mm²): 6.5;– elongation at failure (DIN 53504) (%): 450;– tear strength (ISO 34-1) (N/mm): 33;– shore A hardness (DIN 53505): 70;– glass transition temperature (°C): -50.Application: by spray with a high-pressure bi-mixer pump.Consumption: 2 kg/m² per 2 mm of thickness.Packaging:– component A: 210 kg drums;– component B: 220 kg drums.

Purtop 600Two-component, solvent-free, hybrid polyurethane membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings on new and old buildings directly on site (not suitable for vehicles).

TECHNICAL DATA:A/B ratio (by volume): 100/100.Mechanical characteristics (after 7 days at +23°C):– tensile strength (DIN 53504) (N/mm²): 14;– elongation at failure (DIN 53504) (%): 400;– tear strength (ISO 34-1) (N/mm): 55;– shore A hardness (DIN 53505): 70;– glass transition temperature (°C): -50.Application: by spray with a high-pressure bi-mixer pump.Consumption: 2 kg/m² per 2 mm of thickness.Packaging:– component A: 210 kg drums;– component B: 225 kg drums.

Purtop 400 MTwo-component, solvent-free, hybrid polyurethane membrane applied by spray using a high-pressure bi-mixer pump, for waterproofing new constructions or repairing old structures, such as bridge and viaduct joists.

TECHNICAL DATA:Colour: transparent.Consistency: fluid liquid.Density according to EN ISO 2811-1 (g/cm³): 0.96.Dry solids content (%): 10.Storage: 24 months in its original sealed packaging.Application temperature range: from +5°C to +35°C.Ready for painting over: 2-4 hours.Drying time: 5-6 hours at +20°C.Consumption: 0.20 kg/m² per coat, depending on the type of the substrates.Packaging: 10 kg.

Primer BISynthetic resin primer in solvents, specifically developed for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.

EN 1504-2

EN 1504-2

EN 1504-2

PI-MC-PR-RC-IR


PRINCIPLES


PI-MC-PR-RC-IR


PRINCIPLES


PI-MC-PR-RC-IR


PRINCIPLES


205

TECHNICAL DATA:Consistency: liquid.Colours: black.Application temperature range: from +5°C to +35°C.Hardening time: 1-3 hours.

Purtop Primer BlackOne-component solvent primer, specific for improving adhesion of asphalt flooring on surfaces waterproofed with products from the PURTOP range.

TECHNICAL DATA:Workability time: 75 min.Setting time: 5 hours.Final hardening time: 7 days.Application: trowel or smooth trowel.Consumption: 1.55 kg/m² per mm of thickness.Packaging: 30 kg (A+B) and 6 kg (A+B).

Adesilex PG4Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds.

TECHNICAL DATA:Shape: pre-formed tape.Sizes available:20x10 mm (IDROSTOP 10);20x15 mm (IDROSTOP 15);20x25 mm (IDROSTOP 25).Storage: 12 months.Solubility in water: insoluble.Application temperature range using IDROSTOP MASTIC as an adhesive: from +10°C to +40°C.Waiting time before casting if laying has been carried out using IDROSTOP MASTIC: 24 hours.Waiting time before casting if fixed in place with nails or screws: not required.Waterproofness: up to 5 atm.Maximum width of joint: 7 mm.Packaging: IDROSTOP 10: 6x10 m rolls;IDROSTOP 15: 6x7 m rolls;IDROSTOP 25: 6x5 m rolls.

IdrostopHydrophilic, expanding rubber profiles for waterproof working joints.

TECHNICAL DATA:Shape: pre-formed tape.Size: 20x25 mm.Storage: 24 months.Solubility in water: non-soluble.Application temperature range: from -5°C to +50°C.Waiting time before casting: not required.Packaging: 6x5 m rolls.

Idrostop B25Hydro-expanding bentonite jointing material for sealing construction joints.

25.3 Sealing and waterproofing joints and fillets _____________________________________________________

EN 1504-4


STRUCTURAL BONDING

EN 1504-4

NEW

206


TECHNICAL DATA:Tensile strength: > 2 N/mm².Elongation at failure: > 400%.Tear strength: > 100 N/mm.In service temperature range: from -30°C to +60°C.Packaging: – 120 mmx50 m rolls;– 120 mmx10 m rolls;– 90° and 270° angular pieces;– gaskets for outlets, sizes 120x120 mm and

400x400 mm;– special cross and T pieces.

MapebandAlkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths.

TECHNICAL DATA:Shape: pre-formed strip.Size: 25x20 mm.Solubility in water: non-soluble.Waterproofing capacity: up to 8 bar.Application: bonded in place using MAPEFLEX MS 45 or ULTRABOND MS RAPID one-component adhesives.Application temperature range: from –15°C to +60°C.Packaging: 6 x 5 m rolls.

Idrostop SoftHydro-expansive, high-flexibility bentonite jointing profile for waterproofing construction joints and second pours of concrete.

TECHNICAL DATA:Hardness (Shore A) - ISO 868, ASTM D2240: > 80.Tensile strength (N/mm²) - ISO 527, ASTM D638: 14.Breaking strain (%) - ISO 527, ASTM D638: min 300.Packaging: 12 metre rolls wrapped in polyethylene.Storage: Store in a dry area at temperature between +10°C and +60°C.Available profiles:Idrostop PVC BIC ME 25 (width 25 cm)

Idrostop PVC BIE ME 25 (width 25 cm)

Idrostop PVC BEC ME 25 (width 25 cm)

Idrostop PVC BEE ME 25 (width 25 cm)

Idrostop PVC BI/BE MEWaterproofing construction and expansion joints in civil, industrial and water retaining or excluding structures.

TECHNICAL DATA:Consistency: thixotropic paste.Dry solids content: 100%.Storage: 12 months.Solubility: non-soluble in water.Application temperature range: from +10°C to +40°C.Formation of skin at 23°C and 50% R.H.: approximately 20 minutes.Polymerisation time: approximately 3-4 mm every 24 hours.Modulus of elasticity at 100% elongation: 1.3 MPa.Elongation at failure: 350-450%.Resistance to temperatures: from -40°C to +100°C.Waiting time before casting: 24 hours.Consumption: approximately 250 ml for 10 metres of IDROSTOP.Packaging: boxes containing 24x290 ml cartridges.

Idrostop MasticOne-component adhesive for laying IDROSTOP.

NEW

207

TECHNICAL DATA:Colours: white and grey (other colours available upon request).Movement when in service: 25%.Modulus of elasticity with 100% elongation: 0.3 N/mm².Shore A hardness: 20.Workability: 4 hours.Application: extrusion pistol.EMICODE: EC1 R - very low emssion.Consumption: – 3.0 meters every 300 ml cartridge;– 6.0 meters every 600 soft-cartridge (10x10 mm

section).Packaging: 300 ml cartridges; 600 ml soft-cartridges.

Mapeflex PU40Polyurethane sealant with a low modulus of elasticity with movements up to 25%.

ISO 11600 F 25 LM

TECHNICAL DATA:Movement in service: 10%.Shore A hardness: 65.Workability time: 35 minutes.Set to light foot traffic: 24-36 hours.Colour: 113 grey.Application: trowel, extrusion gun.Consumption: 0.15 kg/m (10x10 mm section).Packaging: 5 kg drums (A+B).

Mapeflex PU30Two-component, high-strength, thixotropic epoxy-polyurethane sealant with high chemical resistance for movements up to 10%.

ISO 11600 F 7.5 P

TECHNICAL DATA:Thickness of tape: approximately 0.7 mm.Resistance to water under pressure: 1.5 bar.Elongation at failure: > 135%.In service temperature range: from -5°C to +30°CPackaging: – 120 mmx50 m rolls;– 120 mmx10 m rolls;– 90° and 270° angular pieces;– gaskets for outlets, sizes 120x120 mm and

425x425 mm.

TECHNICAL DATA:Sizes available: – 17 cm (MAPEBAND TPE 170);– 32.5 cm (MAPEBAND TPE 325).Width of expanding zone:– MAPEBAND TPE 170: 50 mm;– MAPEBAND TPE 325: 165 mm.Thickness: 1.2 mm.Ultimate strength: > 4.5 N/mm².Elongation at failure: > 650%.Bending at low temperatures: < -30°C.Resistance to atmospheric agents and UV rays: > 5000 ore.Resistance to roots: no roots pass through.Inflammability class: B2.Waterproofness: ≤ 0.6 N/mm².Resistance to temperatures: from -20°C to +80°C.Maximum elongation of expanding zone:– 5 mm (MAPEBAND TPE 170);– 10 mm (MAPEBAND TPE 325).Packaging: 30 m rolls.

Mapeband PE 120PVC tape for waterproofing systems made from liquid membranes.

Mapeband TPETPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.

208


TECHNICAL DATA:Movement when in service: ± 25%.Modulus of elasticity at 100% elongation: 0.35 N/mm².Shore A hardness: 20.Workability: 10’.Shore A hardness: 20.Colours: transparent and the 26 colours coordinated with the “MAPEI Coloured Grouts” collection.Application: extrusion pistol.Consumption: 3.1 metres every 310 ml cartridge (10x10 mm section).Packaging: 310 ml cartridges.

Mapesil ACPure, anti-mould, acetic silicone sealant for movements up to 25%.

ISO 11600 F 25 LMDIN 18540BS 5889ASTM C 920TT S 00230CTT S 001543A

TECHNICAL DATA:Density: 40 kg/m³.Tensile strength: 30 N/mm².Water absorption: none.Colour: grey.In service temperature range: from -40°C to +80°C.Packaging: Ø 6 mm, boxes of 2500 mØ 10 mm, boxes of 550 mØ 15 mm, boxes of 550 mØ 20 mm, boxes of 350 mØ 25 mm, boxes of 200 mØ 30 mm, boxes of 160 m

MapefoamClosed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints.Supplied in hanks, total length proportional to the diameter.

TECHNICAL DATA:Elongation at failure: > 1000%.Movement when in service: ± 25%.Set to light foot traffic: according to the depth of the joint.Ready for use: according to the depth of the joint.Shore A hardness: 18.Colour: grey.Application: casting with an extrusion pistol.Storage: 12 months.Consumption: 6.0 metres every 600 tube (10x10 mm section).Packaging: boxes of 20 pieces (600 ml soft-cartridges).

Mapeflex PU50 SLCastable polyurethane sealant with a low modulus of elasticity for movements up to 25%.

ISO 11600 F 25 LM

TECHNICAL DATA:Movement when in service: ± 20%.Modulus of elasticity with 100% elongation: 0.80 N/mm².Shore A hardness: 40.Workability: 10’.Colour: – white, light grey, 113 dark grey and black (300 ml

cartridges);– light grey and black (600 ml soft-cartridges).Application: extrusion pistol.Certification: ISO 11600 F20 HM, GEV EC1 R.Application: extrusion pistol.EMICODE: EC1 R - very low emssion.Consumption: – 3.0 meters every 300 ml cartridge;– 6.0 meters every 600 pieces (10x10 mm section).Packaging: – 600 ml soft-cartridges;– 300 ml cartridges.

Mapeflex PU45Polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%.

ISO 11600 F 20 HM

ADMIXTURES FOR CONCRETE

212


TECHNICAL DATA:Dosage: 0.8 to 2.5 litres per 100 kg of total cementitious material.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Dynamon MR1000Concrete superplasticiser based on modified acrylic polymer; developed specifically for ready mix concrete industries; where the highest levels of concrete quality and performance is required.

TECHNICAL DATA:Dosage: - Standard precast concrete production: 0.5 to 2.0

litres per 100 kg of total cementitious material;- Hollow core slabs production: 0.5 to 1.5 litres per

100 kg of total cementitious materials.Packaging: 200 litre jerrycans; 1000 litre mega drums; and available in bulk on request.

Dynamon PC1100Special hyperplasticising admixture for high quality precast concrete & hollow core slabs.

TECHNICAL DATA:Dosage: 0.25 to 1 litre per 100 kg of total cementitious material.Packaging: 25 kg jerrycans, 200 litre drums and 1000 litre mega drums.

Dynamon SC950High performance proprietary screed additive.

TECHNICAL DATA:Dosage: - High performance concrete: from 0.5 to 1.5 litres per

100 kg of total cementitious material;- Self compacting concrete: from 0.8 to 2.0 litres per

100 kg of total cementitious material.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Dynamon SP5100Hyperplasticising admixture based on polymer modified polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high compressive strengths, long slump retention and self compacting concrete.

26. ADMIXTURES FOR CONCRETE

26.1 Admixtures for concrete _____________________________________________________________________

EN 934-2T 11.1-11.2ASTM C494

Type D and G

EN 934-2T 3.1-3.2-7ASTM C494

Type A,F

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

213

TECHNICAL DATA:Dosage: - High performance concrete: from 0.5 to 1.5 litres per

100 kg of total cementitious material;- Self compacting concrete: from 0.8 to 2.0 litres per


Dynamon SP5300Hyperplasticising admixture based on new generation polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, long slump retention and self consolidating & self compacting concrete.

TECHNICAL DATA:Dosage: - Typical dosage: from 0.5 to 1.5 litres per 100 kg of

total cementitious material;- High performance concrete: from 0.8 to 2.0 litres per


Dynamon SP5600Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, long slump retention and self consolidating & self compacting concrete.

TECHNICAL DATA:Dosage: - Typical dosage: from 0.5 to 1.5 litres per 100 kg of

total cementitious material;- High performance concrete: from 0.8 to 2.0 litres per


Dynamon SP5610Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, particularly suitable for hollow core production.

TECHNICAL DATA:Dosage: - Normal concrete: 0.5 to 1.5 litres per 100 kg of total

cementitious material;- High performance concrete: 0.8 to 2.0 litres per 100

kg of total cementitious material.Packaging: 200 litre jerrycans; 1000 litre mega drums; and available in bulk on request.

Dynamon SR1000Third generation superplasticiser based on modified acrylic polymer; developed specifically for ready mix concrete industries; requiring the highest concrete quality and performance.

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

EN 934-2T 11

ASTM C494Type G and F

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

EN 934-2T 11

ASTM C494Type G and F

214


TECHNICAL DATA:Dosage: 0.8 to 2 litres per 100 kg of total cementitious material.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Dynamon SR1300Superplasticiser based on modified acrylic polymer; developed especially for high flow concrete with extended slump retention in hot climates. Especially suitable for use in concrete mixes containing silica fume and other pozzolanic materials.

Dosage: - High performance concrete: from 0.5 to 1.5 litres per

100 kg of total cementitous material;- Self compacting concrete: 0.5 to 2.0 litres per 100 kg

of total cementitous material.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Dynamon SR3300Hyperplasticising admixture based on polymer modified polycarboxylate ether for high performance and self compacting concrete mixes.

TECHNICAL DATA:Dosage: 0.8 to 2 litres per 100 kg of total cementitious material.Packaging: 200 litre jerrycans; 1000 litre mega drums; and available in bulk on request.

Dynamon SR1380Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, specially designed to improve the rheology of precast concrete.

Dosage: - High performance concrete: from 0.5 to 1.5 litres per

100 kg of total cementitous material;- Self compacting concrete: 0.5 to 2.0 litres per 100 kg

per 100 kg of total cementitous material.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Dynamon SR3500Superplasticiser based on modified acrylic polymer for concrete with very low water cement ratio, high compressive strengths and long slump retention.

EN 934-2T 11.1-11.2ASTM C494/C494M-99a

Type D and G

EN 934-2ASTM C494/C494M-99a

Type F and G

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

EN 934-2EN206

ASTM C494Type F and G

215

TECHNICAL DATA:Dosage: add between 5 and 8% on the amount of cement in the mix.Packaging: 25 kg vacuum-packed polyethylene sacks.

TECHNICAL DATA:Dosage: from 0.2 to 1.2 kg every 100 kg of cement.Packaging: 25 kg canisters.

ExpancreteExpansive admix for controlled-shrinkage concrete.

Idrocrete SBulk water-repellent, waterproofing admixture.

NEW

TECHNICAL DATA:Dosage: from 0.2 to 1 kg every 100 kg of cement.Packaging: 25 kg drums.

Idrocrete DMBulk water-repellent admixture.Particularly recommended for concrete with a damp earth consistency.

TECHNICAL DATA:Dosage: 3 - 6% by weight of cement.Packaging: 9 and 15 kg bags.

Expanfluid MEExpanding agent for shrinkage-free fluid grouts for post-tension cable injection.

NEW

216


TECHNICAL DATA:Dosage: 1-2 kg every 100 kg of cement.Packaging: – boxes of 24x1 kg; – 6, 12 and 30 kg drums.

Mapefast CF/P and Mapefast CF/L(ex Antifreeze S Powder and Antifreeze S Liquid)Chloride-free anti-freeze admixture to ensure regular setting times of cementitious mortar and concrete at temperatures down to -10°C.Also suitable for pre-compressed concrete.

TECHNICAL DATA:Dosage: 1-2 kg every 100 kg of cement.Packaging: 7, 13 and 30 kg drums.

Mapefast C(ex Antifreeze Liquid)Setting and hardening accelerator admixture for cementitious mortar.Allows work to be carried out at temperatures down to -10°C.

TECHNICAL DATA:Consumption: Mortar: 0.25-0.5% by weight of the mortar.Concrete and beton: 5-8 l/m³.Packaging: 20 kg drums.

Mapecure SRACuring admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks.

NEW

TECHNICAL DATA:Dosage: 0.4 - 0.8 litres/100 kg of binder.Packaging: supplied in bulk; 1000 litre tanks; 200 litre drums; and 25 kg cans.

Mapeair AE 10(ex Mapeplast PT1)Air entraining admixture for concrete resistant to freeze/thaw cycles.

NEW

NEW

217

NEW

TECHNICAL DATA:Dosage: 0.4-0.8 kg m³ of concrete or mortar.Packaging: boxes of 30x0.6 kg each.

TECHNICAL DATA:Dosage: from 1 to 7 kg per cubic metre of mix.Packaging: 6 kg polyethylene bags.

Mapefibre NS12/NS18Virgin, mono-filament polypropylene fibres for mortar and concrete, available in diameters of 12 and 18 mm.

Mapefibre ST24/ST42Structural polymer fibres for concrete and cementitious screeds. May be used to completely or partially substitute conventional reinforcement.Length of fibres: 24 and 42 mm.

TECHNICAL DATA:Dosage: 0.5 - 3.0 Litres/100 kg of total cementitious materials.Packaging: 25 litre jerrycans; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapefluid N180Water-reducing, superplasticiser/retarder for concrete.

TECHNICAL DATA:Dosage: 0.5 - 2.0 Litres/100 kg of total cementitious materials.Packaging: 25 litre jerrycans; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapefluid N140Water-reducing superplasticiser for concrete.

NEW

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

EN 934-2T 2, 10, 11.1 & 11.2

ASTM C494Type A, B, D and G

BS 5075: Part 1

NEW

218

TECHNICAL DATA:Dosage: 0.5 and 2 litres/100 kg of total cementitious materials..Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Mapefluid N350High range water reducing superplasticiser for high strength concrete and concrete containing high proportions of GGBS and silica fume.

TECHNICAL DATA:Dosage: - Standard concrete production: from 0.5 to 1.5 litres

per 100 kg of total cementitous materials;- High performance concrete: 0.5 to 2.0 litres per

100 kg of total cementitous materials.Packaging: 25 litre jerrycans; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapefluid N360High range water reducing superplasticiser for high strength concrete and concrete containing high proportions of GGBS and silica fume.


TECHNICAL DATA:Dosage: 0.5 - 3.0 Litres/100 kg of total cementitious materials.Packaging: 25 litre jerrycans; 200 litre drums; 1000 litre megadrums; and available in bulk on request.

Mapefluid N190Water-reducing, superplasticiser developed specifically for ready mix concrete industries; requiring the highest concrete quality and performance.

TECHNICAL DATA:Dosage: 0.5 - 2 litres/100 kg of total cementitious materials..Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Mapefluid N300High range water reducing superplasticiser for concrete containing fly ash, GGBS, and silica fume.

EN 934-2T 11

ASTM C494Type F, G

EN 934-2T 2, 10, 11.1 & 11.2

ASTM C494Type A, B, D and G

BS 5075: Part 1

EN 934-2T 11

ASTM C494Type F, G

EN 934-2T 11

ASTM C494Type F, G

219



100 kg of total cementitous materials.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Mapefluid N400High range water reducing superplasticiser for high strength concrete and concrete containing high proportions of cement replacement materials.



100 kg of total cementitous materials.Packaging: 25 litre containers; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapefluid N400 PCHigh range water reducing superplasticiser for high strength concrete and concrete containing high proportions of cement replacement materials.

TECHNICAL DATA:Dosage: - Standard concrete production: 0.5 to 1.2 litres per

100 kg of total cementitous materials;- High performance concrete: 1.0 to 2.0 litres per 100

kg of total cementitous materials.Packaging: 25 litre drums; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapefluid N500High range water reducing superplasticiser for all types of high durability concretes.

TECHNICAL DATA:Dosage: from 20 to 60 kg per m³ of mix.Packaging: 11 kg vacuum-packed polyethylene bags.

Mapefluid PZ500Pozzolanic-activity super-plasticiser in powder form for high-quality mortar and concrete.

EN 934-2T 3

ASTM C494Type F,G

EN 934-2T 3

ASTM C494Type F

EN 934-2T 3.1-3.2-7ASTM C494

Type F,G

220


TECHNICAL DATA:Dosage: from 20 to 60 kg per m³ of mix.Packaging: 11 kg bags.

Mapefluid PZ504Pozzolanic-activity super-plasticiser in powder form for high-quality mortar and concrete and a low loss in workability.

TECHNICAL DATA:Dosage: Required addition Predicted chloride rate of content kg/m³ MAPEPLAST CNI solution (l/m³) 1 2.50 2 5.0 3 7.50 4 10.0 5 12.50 7 17.50 8 20.0 10 25.0

Packaging: 200 litre jerrycans; 1000 litre mega drums; and available in bulk on request.

Mapeplast CNICalcium nitrite based corrosion inhibiting concrete admixture.

TECHNICAL DATA:Dosage: 0.5 kg for every m³ of mix.Packaging: 0.5 kg water-soluble bags.

Mapeplast LA PowderAdditive for fluid pumpable fill and light mortar and concrete.

TECHNICAL DATA:Dosage: 0.3 - 0.8 Liters/100 kg of total cementitious materials.Packaging: 25 litre jerrycans; 200 litre drums; 1000 litre mega drums; and available in bulk on request.

Mapeplast RP100Retarding plasticiser water reducing admixture.

EN 934-2T 2

ASTM C494Type B,D

EN 934-2ASTM G109and C494

Type C

221

TECHNICAL DATA:Dosage: 0.3 - 0.8 Liters/100 kg of total cementitious materials.Packaging: supplied in bulk; or 200 litre drums and 1000 litre totes available on request.

Mapeplast RP200Retarding water reducing plasticising admixture.

TECHNICAL DATA:Consistency: liquid.Dry solids content: 40%.Storage: 24 months.Consumption:– for adhesive slurry: 100-150 g/m²;– to prepare screeds and render: 50-80 kg/m³.Packaging: 5, 10 and 25 kg drums and 12x1 kg packages.

PlanicreteSynthetic latex rubber to improve adhesion and strength of cementitious mortar.

TECHNICAL DATA:Dosage: Component A: 0.5 kg/m³ of concrete to be treated;Component B: 6 kg/m³ of concrete to be treated.Packaging: Component A: 0.5 kg water-soluble bag;Component B: 1 kg water-soluble bag.

Re-Con ZerøTwo-component powdered product for recovering returned concrete from truck mixers.

NEW

TECHNICAL DATA:Application: brush or spray.Consumption: 10-30 g/m² of neat product.Packaging: 4.5, 23 and 9 kg drums.

Form-Release Agent DMA 1000Emulsionable form-release agent for wooden formwork. Emulsify one part of the product with 5-20 parts of water according to the type of formwork.

26.2 Superficial form-release agents and curing compounds ___________________________________________

NEW

EN 934-2T 2

ASTM C494Type B,D

222


TECHNICAL DATA:Application: brush or spray.Consumption: 20-40 g/m² according to the type of formwork used.Packaging: 4.5 and 23 kg drums.

Form-Release Agent DMA 2000Ready-to-use chemical/physical action form-release agent for metal formwork.

TECHNICAL DATA:Application: roller or spray.Consumption: 0.11-0.15 kg/m².Packaging: 10 kg drums.

Mapecure CAPaintable, film-forming, light-coloured acrylic curing agent in solvent for mortar and concrete.

TECHNICAL DATA:Application: spray.Consumption: – neat: 70-100 g/m²;– diluted: 1:1 with water: 140-200 g/m².Packaging: 25 kg drums.

Mapecure EAnti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds.

TECHNICAL DATA:Application: roller or spray.Consumption: 0.10-0.15 kg/m².Packaging: 24 kg drums.

Mapecure SFilm-forming curing agent in solvent to protect mortar and concrete from drying out too quickly when exposed to sunlight and winds.


223

TECHNICAL DATA:Application: by spray with suitable spray system.Consumption: from 15 to 25 g/m² on metal or plastic formwork.Packaging: 23 kg drums.

Mapeform Eco 31Chemical-action vegetable oil-based form-release agent in water emulsion to improve exposed surfaces. Particularly suitable for use on vertical surfaces. Also suitable for steam curing cycles.

NEW

TECHNICAL DATA:Application: by spray with suitable spray system.Consumption: from 15 to 25 g/m² on metal or plastic formwork.Packaging: 23 kg drums.

Mapeform Eco 61Chemical-action vegetable oil-based form-release agent in water emulsion to improve exposed surfaces. Particularly suitable for use on horizontal surfaces. Also suitable for steam curing cycles.

NEW

TECHNICAL DATA:Application: by spray with suitable spray system.Consumption: from 15 to 25 g/m² on metal or plastic formwork.Packaging: 4.5 and 23 kg drums.

Mapeform Eco 91Chemical-action vegetable oil-based form-release agent in water emulsion to improve exposed surfaces. Also suitable for steam curing cycles.

NEW

TECHNICAL DATA:Application: by spray with suitable spray equipment.Consumption: from 15 to 25 g/m² on metal or plastic formwork.Packaging: 23 kg drums.

Mapeform Eco OilChemical-action vegetable oil-based form release agent to make stripping concrete easier.

NEW

NEW

NEW

NEW

NEW

224

SELECTION CHARTS

LAYING CERAMIC TILES, MOSAICS AND STONE MATERIAL IN INTERIORS

≈ Rapid solution

225The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides.

MAPEI SOLUTIONS - INSTALLATION OF STONEMATERIALS

226

MAPEI SOLUTIONS FOR THE INSTALLATION OF STONE MATERIALThe choice of which type of adhesive to use when installing stone material must be made according to their dimensional stability and their sensitivity to water and thermal variations. On the contrary to ceramic tiles, stone material may curl considerably due to the presence of humidity which rises up from the adhesive layer of mortar bed. Furthermore, in the presence of water rising up from the substrate, screed or adhesive, stone materials may be stained and/or present unsightly efflorescence. Mapei has studied and developed a system, the only one of its kind in the world, to analytically classify stone material according to their sensibility to water, and which is based on the following test procedure:A damp felt is placed on the reverse side of the stone slab to simulate the humidity which rises up from the substrate (sand and cement mortar bed or traditional adhesive); by means of a series of high-precision, digital sensors a real-time recording of the deformation of the stone slab due to the humidity given off from the felt is carried out.

According to the amount of deformation (δ), measured after 6 hours after applying the damp felt, the stone material is divided into three classes (Tab. 2):

a) Class A: δ < 0.3 mmb) Class B: 0.3 δ < 0.6 mmc) Class C: δ 0.6 mm

For slabs in class A, the choice of adhesive will depend on factors other than the characteristics of the stone material (the size of the slab, type of substrate, service conditions of the material). For the materials in class B or class C, the test must be repeated, but a layer of fast-setting cementitious adhesve is used instead of the damp felt, to establish if the use of a fast-setting adhesive that blocks the movements in the first drying hours is sufficient for laying these particularly moisture sensitive materials, or it is necessary to use a water-free adhesive (epoxy or polyurethane).Table 1 lists the recommended Mapei adhesives for laying natural stone material or agglomerates, based on the dimensional stability for sensitvity to water and thermal variations in relation to their tendency to stain.

MAPEI UAE is privileged to have the country’s only stone testing machine.

MAP

EI’S

PRO

DUCT

S

MAPEI ADHESIVES FOR LAYING STONE MATERIAL ON CEMENT-BASED PLASTER AND SCREEDS

STONE MATERIAL STAININGDEFORMATION CLASS

A B** C***

Natural stone materialsCement-based agglomerates

LOCATION: Internal/External

not sensitiveKERAFLEX, ADESILEX P4, ADESILEX P9 EXPRESS,

KERABOND T+ISOLASTIC

GRANIRAPIDELASTORAPID

KERALASTICKERAPOXY

sensitiveGRANIRAPID

ELASTORAPIDGRANIRAPID

ELASTORAPIDKERALASTICKERAPOXY

Resin-based agglomerates*

LOCATION: Internal use only

not sensitive KERAFLEX MAXI S1GRANIRAPID

ELASTORAPIDKERALASTICKERAPOXY

sensitiveGRANIRAPID


KERALASTICKERAPOXY

* Because of the high coefficient of thermal expansion (>25 x 10-6 C-1 ) of slabs in resin-based artifical material, this type of material is not recommended for external dressings due to the very high risk of it coming unstuck from the support material. Also, when resin-based artificial material is used for internal applications, if it is laid in areas subject to direct sunlight (close to large shop windows, for example), whatever the stain sensitivity or deformation class of the matieral, it is necessary to use KERALASTIC.

** Materials belonging to classes B and C which after repeating the dimensional stability test with GRANIRAPID or ELASTORAPID, enter into class A (δ < 0.3 mm).

*** Materials belonging to classes B and C which, after repeating the dimensional stability test with GRANIDRAPID or ELASTORAPID, remain in classes B or C.

Tab. 1

227

A movement of less than 0.3 mm after 6 hours A movement of between 0.3 mm and 0.6 mm after 6 hours

A movement of more than 0.6 mm after 6 hours

Granite:BlackBlue ImpalaGreenMontorfanoRed

Various:Brazillian Pink QuartzCrystalline AlabasterMexican StoneOnyxPietra del SolPietra LaraVolvic stone

Marble:ArabesqueBrazillian WhiteBianco RosaBotticinoCarraraJacarandaMarquina BlackMotrico GreyPolished ParadiseRosa PortugaloRosso VeronaSerpentino ValmalencoStatuario VenatoThassos WhiteTravertine S. ClassicVenetian Gold

Agglomerates:Botticino (cement)Breccia Aurora (resin)Carrara White (cement)

Various:Arenite PrinceBlack ArdesiaBrazilian KoburkoCarona ArdesiaImperial BrownIndian ArdesiaSardinian Blue IgnimbriteSardinian Red Ignimbrite

Marble:AmethyistPietra CappellaniaTrachyt Weidenhahn

Agglomerates:Alpe Sabbiato (resin)Amarelo (resin)Diorite (cement)Giallo Camico (resin)Golden Yellow (cement)Marbrelys (resin)Zandobbio White (cement)

Porphyry:Bisanzio GreenGrey GreenMarronPeruvian PorphyryPredazzo RedSperanza GreenViolet

Various:Ardesua di CaronaGiada GreenMergozzo GreenPietra LaraVolvic Stone

Marble:Alpine Copper GreenAlpine GreenAver GreenGuatemalan Green

Agglomerates:Levantine Green (resin)Levantine Red (resin)Light Grey (cement)Portoro (resin)

The above classification, while corresponding to the company’s wide experience, is to be considered merely as an indicator.The tests on which it is based were carried out on samples which are not necessarily representative of all types of stone material belonging to the same mineralogical group.

CLASSIFICATION OF NATURAL AND ARTIFICIAL STONE MATERIALS ACCORDING TO THE DIMENSIONAL STABILITY TEST (SENSITIVITY TO WATER)

Class A Class B Class C

SOME OF THE MATERIALS TESTED BY MAPEI’S RESEARCH LABORATORIES

Tab. 2

228

SELECTION CHARTS

LAYING CERAMIC TILES, MOSAICS AND STONE MATERIAL IN INTERIORS

≈ Rapid solution


SELECTION CHARTS

230

SELECTION CHARTS

KEY

EPOXY-POLYURETHANE adhesive

ADHESIVES FOR INSTALLING THIN PORCELAIN TILES ON INTERNAL AND EXTERNAL SURFACES

Installation of thin porcelain tiles WITH glass fibre strengthening mesh on internal cementitious screeds or existing ceramic flooring

< 5000 cm2

(the longer side must be no more than 100 cm)

KERAFLEX MAXI S1

ULTRALITE S1GRANIRAPID

> 5000 cm2 ULTRALITE S2

KERABOND T + ISOLASTIC ELASTORAPID

Installation of thin porcelain tiles WITH glass fibre strengthening mesh on internal cementitious screeds with underfloor heated flooring

< 5000 cm2


KERAFLEX MAXI S1

KERABOND T + ISOLASTIC

ULTRALITE S2

ELASTORAPID

GRANIRAPID

> 5000 cm2 TECHNICAL RECOMMENDATION CAN

BE OBTAINED FROM THE LOCAL MAPEI REPRESENTATIVE

Installation of thin porcelain WITH or WITHOUT glass fibre strengthening mesh on internal walls

< 5000 cm2


KERAFLEX MAXI S1


> 5000 cm2 KERABOND T + ISOLASTIC

ULTRALITE S2 ELASTORAPID

Installation of thin porcelain tiles WITH or WITHOUT glass fibre strengthening mesh on waterproofed internal surfaces (such as MAPELASTIC or MAPEGUM WPS)

< 5000 cm2


KERAFLEX MAXI S1

ULTRALITE S1

ELASTORAPID

GRANIRAPID

> 5000 cm2 KERABOND T + ISOLASTIC ULTRALITE S2 ELASTORAPID

Installation of thin porcelain tiles WITH or WITHOUT glass fibre strengthening mesh on work benches, wooden furnishings, marine plywood and metal

< 5000 cm2

(the longer side must be no more than 100 cm) KERALASTIC

KERALASTIC TELASTORAPID *

> 5000 cm2

Installation of tiles WITHOUT glass fibre strengthening mesh on façades on cementitious render or reinforced concrete

< 5000 cm2


KERAFLEX MAXI S1

ULTRALITE S1ELASTORAPID


ULTRALITE S2

TECHNICAL RECOMMENDATION CAN BE OBTAINED FROM THE LOCAL MAPEI

REPRESENTATIVE

Installation of tiles WITH glass fibre strengthening mesh on façades on cementitious render or reinforced concrete

< 5000 cm2



ULTRALITE S2 ELASTORAPID *

> 5000 cm2 KERALASTIC T ELASTORAPID *

MAPETHERM TILE SYSTEM, for installing thin porcelain tiles on thermal insulation systems

< 5000 cm2




RECOMMENDED ADHESIVES

TYPE OF SUBSTRATE TILE FORMAT NORMAL SETTING FAST SETTING


Installation of thin porcelain tiles WITH glass fibre strengthening mesh on internal cementitious screeds or existing ceramic flooring

< 5000 cm2


KERAFLEX MAXI S1


> 5000 cm2 ULTRALITE S2

KERABOND T + ISOLASTIC ELASTORAPID

Installation of thin porcelain tiles WITH glass fibre strengthening mesh on internal cementitious screeds with underfloor heated flooring

< 5000 cm2


KERAFLEX MAXI S1


ULTRALITE S2

ELASTORAPID

GRANIRAPID

> 5000 cm2 TECHNICAL RECOMMENDATION CAN

BE OBTAINED FROM THE LOCAL MAPEI REPRESENTATIVE

Installation of thin porcelain WITH or WITHOUT glass fibre strengthening mesh on internal walls

< 5000 cm2


KERAFLEX MAXI S1




Installation of thin porcelain tiles WITH or WITHOUT glass fibre strengthening mesh on waterproofed internal surfaces (such as MAPELASTIC or MAPEGUM WPS)

< 5000 cm2


KERAFLEX MAXI S1

ULTRALITE S1

ELASTORAPID

GRANIRAPID

> 5000 cm2 KERABOND T + ISOLASTIC ULTRALITE S2 ELASTORAPID

Installation of thin porcelain tiles WITH or WITHOUT glass fibre strengthening mesh on work benches, wooden furnishings, marine plywood and metal

< 5000 cm2

(the longer side must be no more than 100 cm) KERALASTIC

KERALASTIC TELASTORAPID *

> 5000 cm2

Installation of tiles WITHOUT glass fibre strengthening mesh on façades on cementitious render or reinforced concrete

< 5000 cm2


KERAFLEX MAXI S1



ULTRALITE S2

TECHNICAL RECOMMENDATION CAN BE OBTAINED FROM THE LOCAL MAPEI

REPRESENTATIVE

Installation of tiles WITH glass fibre strengthening mesh on façades on cementitious render or reinforced concrete

< 5000 cm2



ULTRALITE S2 ELASTORAPID *

> 5000 cm2 KERALASTIC T ELASTORAPID *

MAPETHERM TILE SYSTEM, for installing thin porcelain tiles on thermal insulation systems

< 5000 cm2




RECOMMENDED ADHESIVES

TYPE OF SUBSTRATE TILE FORMAT NORMAL SETTING FAST SETTING

* Depending on the type of substrate. Please contact the local Mapei representative.

232

SELECTION CHARTS

ADHESIVES FOR INSTALLING CERAMIC TILES, MOSAICS AND STONE ON INTERNAL FLOORS

Cementitious screeds and screeds made from special binders

ADESILEX P10 -KERABOND T

ADESILEX P9ADESILEX P9 EXPRESS

ADESILEX P9

KERAFLEX

GRANIRAPID

ADESILEX P9 EXPRESS

KERAFLEX

ADESILEX P9

GRANIRAPID

ADESILEX P9 EXPRESS

ELASTORAPID

KERALASTIC

GRANIRAPID

ELASTORAPID

KERALASTIC

KERAPOXY / KERAPOXY ADHESIVE

Concrete floor slabs and flooring

ADESILEX P10 +ISOLASTIC 50%

GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEX

ADESILEX P9 EXPRESS

GRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

ADESILEX P9 EXPRESS

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

Anhydrite screeds (with PRIMER G or ECO PRIM T)

ADESILEX P10

KERABOND T +ISOLASTIC

-

KERABOND T

ADESILEX P9

KERAFLEX

-ADESILEX P9

KERAFLEXGRANIRAPID KERAFLEX -

Heated screeds ADESILEX P10 +ISOLASTIC 50%

GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEX

ADESILEX P9 EXPRESS

GRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

Existing ceramic, terrazzo or natural stone floors


GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEXGRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

Surfaces waterproofed with MAPEGUM WPS or MAPELASTIC


GRANIRAPID

ELASTORAPID

KERAFLEX

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

ELASTORAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

KERALASTICMarine plywoodKERABOND T +

ISOLASTIC

KERALASTICELASTORAPID






KERALASTICELASTORAPID -

Existing PVC, rubber or linoleum floors


KERALASTIC

- KERALASTIC -KERALASTIC

KERAPOXY ADHESIVE- KERALASTIC - -

Metal surfaces KERALASTIC - KERALASTIC - KERALASTIC -KERALASTIC

KERAPOXY/ KERAPOXY ADHESIVE

-

KERALASTIC


-KERALASTIC


KEY

HYDRAULIC BINDER-BASED adhesive


EPOXY adhesive

FLOOR CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE

TYPE OF SUBSTRATE Glass mosaics or ceramic tiles Single-fired, double-fired or terracotta Porcelain tiles or klinker Dimensionally-stable stone (class A according to MAPEI classification system) not sensitive to staining

Stone with poor dimensional stability (class B according to MAPEI classification system) or stone sensitive to staining

Stone with no dimensional stability (class C according to MAPEI classification system) or resin-based recomposed material sensitive to heat

NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING



ADESILEX P10 -KERABOND T

ADESILEX P9ADESILEX P9 EXPRESS

ADESILEX P9

KERAFLEX

GRANIRAPID

ADESILEX P9 EXPRESS

KERAFLEX

ADESILEX P9

GRANIRAPID

ADESILEX P9 EXPRESS

ELASTORAPID

KERALASTIC

GRANIRAPID

ELASTORAPID

KERALASTIC


Concrete floor slabs and flooring


GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEX

ADESILEX P9 EXPRESS

GRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

ADESILEX P9 EXPRESS

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

Anhydrite screeds (with PRIMER G or ECO PRIM T)

ADESILEX P10


-

KERABOND T

ADESILEX P9

KERAFLEX

-ADESILEX P9

KERAFLEXGRANIRAPID KERAFLEX -

Heated screeds ADESILEX P10 +ISOLASTIC 50%

GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEX

ADESILEX P9 EXPRESS

GRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

Existing ceramic, terrazzo or natural stone floors


GRANIRAPID

ELASTORAPID

ADESILEX P9

KERAFLEXGRANIRAPID

KERAFLEX

ULTRALITE S1

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID



GRANIRAPID

ELASTORAPID

KERAFLEX

KERAFLEX MAXI S1

ELASTORAPID

GRANIRAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

ELASTORAPID

KERAFLEX

KERAFLEX MAXI S1

ULTRALITE S1

GRANIRAPID

ELASTORAPID

KERALASTICMarine plywoodKERABOND T +

ISOLASTIC







KERALASTICELASTORAPID -

Existing PVC, rubber or linoleum floors


KERALASTIC

- KERALASTIC -KERALASTIC

KERAPOXY ADHESIVE- KERALASTIC - -

Metal surfaces KERALASTIC - KERALASTIC - KERALASTIC -KERALASTIC


-

KERALASTIC


-KERALASTIC







234

SELECTION CHARTS

ADHESIVES FOR INSTALLING CERAMIC TILES, MOSAICS AND STONE ON INTERNAL WALLS

(*) apply PRIMER G or ECO PRIM T beforehand

Cementitious render or skim coats

ADESILEX P10ULTRAMASTIC III

-KERABOND TADESILEX P9

ADESILEX P22 ADESILEX P9 EXPRESS

ADESILEX P9KERAFLEX

ULTRAMASTIC III

ADEXILEX P9 EXPRESSGRANIRAPID

KERAFLEX

ADESILEX P9EXPRESS


KERALASTIC T


KERALASTIC TKERAPOXY / KERAPOXY ADHESIVE

ConcreteADESILEX P10 +ISOLASTIC 50%ULTRAMASTIC III

ELASTORAPID ADESILEX P9

KERAFLEXADESILEX P22

GRANIRAPID

KERAFLEXULTRALITE S1

KERAFLEX MAXI S1ULTRAMASTIC III


KERAFLEXKERAFLEX MAXI S1

ULTRALITE S1

ADESILEX P4GRANIRAPID

ELASTORAPID

Expanded or cellular cement blocks (with PRIMER G or ECO PRIM T)

ADESILEX P10ULTRAMASTIC 5


ULTRAMASTIC 5 ADESILEX P9 EXPRESS

ADESILEX P9KERAFLEX

ULTRAMASTIC 5

ADESILEX P9 EXPRESSGRANIRAPID


Lime-based skim coats or render (with PRIMER G or ECO PRIM T)

ADESILEX P10ULTRAMASTIC III (*)

-


ADESILEX P9ADESILEX P22 (*)

ADESILEX P9 EXPRESSADESILEX P9

KERAFLEXULTRAMASTIC III (*)



PlasterboardADESILEX P10

ULTRAMASTIC III -

ADESILEX P9KERAFLEX


ADESILEX P9KERAFLEX





ADESILEX P10 +ISOLASTIC 50% ELASTORAPID

ADESILEX P9KERAFLEX

KERAFLEX MAXI S1GRANIRAPID




ULTRALITE S1

Cement-fibre panels (with PRIMER G or ECO PRIM T)



ULTRAMASTIC 5-

ADESILEX P9KERAFLEX

ULTRAMASTIC 5GRANIRAPID


GRANIRAPID GRANIRAPID

KERALASTIC T

Metal surfaces KERALASTIC T - KERALASTIC T - KERALASTIC T - KERALASTIC T - -

WALLS CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





KEY

HYDRAULIC BINDER-BASED adhesive


EPOXY adhesive

READY-TO-USE DISPERSION adhesive


Cementitious render or skim coats

ADESILEX P10ULTRAMASTIC III

-KERABOND TADESILEX P9ADESILEX P22


KERAFLEXULTRAMASTIC III

ADEXILEX P9 EXPRESSGRANIRAPID

KERAFLEX

ADESILEX P9EXPRESS


KERALASTIC T


KERALASTIC TKERAPOXY / KERAPOXY ADHESIVE

ConcreteADESILEX P10 +ISOLASTIC 50%ULTRAMASTIC III

ELASTORAPID ADESILEX P9

KERAFLEXADESILEX P22

GRANIRAPID

KERAFLEXULTRALITE S1




ULTRALITE S1

ADESILEX P4GRANIRAPID

ELASTORAPID

Expanded or cellular cement blocks (with PRIMER G or ECO PRIM T)



ULTRAMASTIC 5 ADESILEX P9 EXPRESS

ADESILEX P9KERAFLEX

ULTRAMASTIC 5



Lime-based skim coats or render (with PRIMER G or ECO PRIM T)

ADESILEX P10ULTRAMASTIC III (*)

-


ADESILEX P9ADESILEX P22 (*)


KERAFLEXULTRAMASTIC III (*)



PlasterboardADESILEX P10

ULTRAMASTIC III -

ADESILEX P9KERAFLEX


ADESILEX P9KERAFLEX






ADESILEX P9KERAFLEX

KERAFLEX MAXI S1GRANIRAPID




ULTRALITE S1

Cement-fibre panels (with PRIMER G or ECO PRIM T)



ULTRAMASTIC 5-

ADESILEX P9KERAFLEX

ULTRAMASTIC 5GRANIRAPID


GRANIRAPID GRANIRAPID

KERALASTIC T

Metal surfaces KERALASTIC T - KERALASTIC T - KERALASTIC T - KERALASTIC T - -

WALLS CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





236

SELECTION CHARTS

ADHESIVES FOR INSTALLING CERAMIC TILES, MOSAICS AND STONE ON EXTERNAL SURFACES

(*) apply PRIMER G or ECO PRIM T beforehand


TYPE OF SUBSTRATE Glass mosaics or ceramic tiles Porcelain tiles, klinker, single-fired or terracotta Dimensionally-stable stone (class A according to MAPEI classification system) not sensitive to staining



NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING







ULTRALITE S1



ELASTORAPID GRANIRAPID

KERALASTIC TKERAPOXY / KERAPOXY ADHESIVESurfaces waterproofed with MAPELASTIC

ELASTORAPID

ULTRALITE S1ULTRALITE S2

KERAFLEX MAXI S1KERABOND T + ISOLASTIC

ELASTORAPID



Concrete



ELASTORAPID



KERALASTIC T


Cementitious render or concrete ADESILEX P10 +ISOLASTIC 50%




ELASTORAPID


KERAFLEX MAXI S1 KERABOND T + ISOLASTIC



ELASTORAPID

GRANIRAPIDKERALASTIC T


WALLS AND FAÇADES CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





Cementitious screeds, screeds made with special binders, concrete and surfaces waterproofed with MAPELASTIC






KERAFLEX MAXI S1



- - -

Fibreglass KERAPOXY / KERAPOXY ADHESIVE - KERAPOXY /

KERAPOXY ADHESIVE - KERAPOXY / KERAPOXY ADHESIVE - - - -

SWIMMING POOLS, TANKS, etc. CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





KEY HYDRAULIC BINDER-BASED adhesiveEPOXY-POLYURETHANE adhesiveEPOXY adhesive













ULTRALITE S1



ELASTORAPID GRANIRAPID

KERALASTIC TKERAPOXY / KERAPOXY ADHESIVESurfaces waterproofed with MAPELASTIC

ELASTORAPID



ELASTORAPID



Concrete



ELASTORAPID



KERALASTIC T


Cementitious render or concrete ADESILEX P10 +ISOLASTIC 50%




ELASTORAPID


KERAFLEX MAXI S1 KERABOND T + ISOLASTIC



ELASTORAPID

GRANIRAPIDKERALASTIC T


WALLS AND FAÇADES CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





Cementitious screeds, screeds made with special binders, concrete and surfaces waterproofed with MAPELASTIC






KERAFLEX MAXI S1



- - -

Fibreglass KERAPOXY / KERAPOXY ADHESIVE - KERAPOXY /

KERAPOXY ADHESIVE - KERAPOXY / KERAPOXY ADHESIVE - - - -

SWIMMING POOLS, TANKS, etc. CERAMIC TILES AND MOSAICS NATURAL/ARTIFICIAL STONE





238

SELECTION CHARTS

■ = fit for use • = particularly recommended by Mapei * = with FUGOLASTIC

GROUTS AND FLEXIBLE JOINTS

TYPE OF FINISHING MATERIAL WHERE TO USE

Mos

aic

Cotto

Cera

mic

tile

s

Ston

e

Deco

rativ

e el

emen

ts

in li

ghtw

eigh

t ce

men

titio

us

cong

lom

erat

e

Porp

hyry

and

roug

h-cu

t sto

ne

Resi

dent

ial

envi

ronm

ents

Bath

room

s an

d ki

tche

ns

Balc

onie

s an

d te

rrace

s

Swim

min

g po

ols

Saun

as a

nd

Turk

ish

bath

s

Supe

rmar

kets

Publ

ic b

uild

ings

Faça

de c

oatin

gs

Food

stuf

fs in

dust

ries

Mea

t fac

torie

s an

d oi

l ble

ndin

g fa

cilit

ies

Foot

path

s an

d co

urty

ards

Road

s an

d sq

uare

s w

ith li

mite

d tra

ffic

Road

s an

d sq

uare

s fo

r veh

icul

ar tr

affic

CEMENTITIOUS GROUTS

ULTRACOLOR PLUS(joints from 2 to 20 mm) ■ ■ • • • • • • • • • • ■

KERACOLOR SF(joints up to 4 mm) ■ ■ ■ ■ ■ ■* ■* ■*

KERACOLOR FF (joints up to 6 mm) ■ ■ ■ ■ ■ ■* ■* ■*

KERACOLOR GG(joints from 4 to 15 mm) ■ ■ ■ ■ ■ ■* ■* ■* ■ - •* ■ - •* ■* ■

EPOXY GROUTS

KERAPOXY (joints of at least 3 mm) ■ ■ ■ • ■ • • ■ ■ •KERAPOXY DESIGN (joints from 2 to 7 mm) • ■ ■ • ■ • • ■ •KERAPOXY P ■ ■ ■ • • •KERAPOXY CQ ■ ■ ■ ■ ■ ■ ■ • • •KERAPOXY IEG ■ •

READY-TO-USE PASTE PRODUCTS

FLEXCOLOR ■ ■ •FIX & GROUT BRICK • ■ ■

PRODUCTS FOR LAYING PORPHYRY AND ROUGH-CUT STONE

KERACOLOR PPN • ■ • • •MAPESTONE PFS • • • • •MAPESTONE PFS PCC2 • • • • •

FLEXIBLE JOINTS

MAPESIL AC • ■ • • • ■ • • ■ ■MAPESIL LM ■ • ■ • ■ • ■ ■ • ■ ■ ■ • ■MAPEFLEX PU21 ■ ■ ■ ■ ■ ■MAPEFLEX PU20 ■ ■ • • • •MAPEFLEX PU30 ■ ■ ■ ■ ■MAPEFLEX PU40 ■ ■ ■ ■ ■ ■ ■MAPEFLEX PU45 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■MAPEFLEX PU50SL ■ • ■ ■ ■ ■ • • •


TYPE OF FINISHING MATERIAL WHERE TO USE

Mos

aic

Cotto

Cera

mic

tile

s

Ston

e

Deco

rativ

e el

emen

ts

in li

ghtw

eigh

t ce

men

titio

us

cong

lom

erat

e

Porp

hyry

and

roug

h-cu

t sto

ne

Resi

dent

ial

envi

ronm

ents

Bath

room

s an

d ki

tche

ns

Balc

onie

s an

d te

rrace

s

Swim

min

g po

ols

Saun

as a

nd

Turk

ish

bath

s

Supe

rmar

kets

Publ

ic b

uild

ings

Faça

de c

oatin

gs

Food

stuf

fs in

dust

ries

Mea

t fac

torie

s an

d oi

l ble

ndin

g fa

cilit

ies

Foot

path

s an

d co

urty

ards

Road

s an

d sq

uare

s w

ith li

mite

d tra

ffic

Road

s an

d sq

uare

s fo

r veh

icul

ar tr

affic

CEMENTITIOUS GROUTS

ULTRACOLOR PLUS(joints from 2 to 20 mm) ■ ■ • • • • • • • • • • ■

KERACOLOR SF(joints up to 4 mm) ■ ■ ■ ■ ■ ■* ■* ■*

KERACOLOR FF (joints up to 6 mm) ■ ■ ■ ■ ■ ■* ■* ■*

KERACOLOR GG(joints from 4 to 15 mm) ■ ■ ■ ■ ■ ■* ■* ■* ■ - •* ■ - •* ■* ■

EPOXY GROUTS

KERAPOXY (joints of at least 3 mm) ■ ■ ■ • ■ • • ■ ■ •KERAPOXY DESIGN (joints from 2 to 7 mm) • ■ ■ • ■ • • ■ •KERAPOXY P ■ ■ ■ • • •KERAPOXY CQ ■ ■ ■ ■ ■ ■ ■ • • •KERAPOXY IEG ■ •

READY-TO-USE PASTE PRODUCTS

FLEXCOLOR ■ ■ •FIX & GROUT BRICK • ■ ■

PRODUCTS FOR LAYING PORPHYRY AND ROUGH-CUT STONE

KERACOLOR PPN • ■ • • •MAPESTONE PFS • • • • •MAPESTONE PFS PCC2 • • • • •

FLEXIBLE JOINTS

MAPESIL AC • ■ • • • ■ • • ■ ■MAPESIL LM ■ • ■ • ■ • ■ ■ • ■ ■ ■ • ■MAPEFLEX PU21 ■ ■ ■ ■ ■ ■MAPEFLEX PU20 ■ ■ • • • •MAPEFLEX PU30 ■ ■ ■ ■ ■MAPEFLEX PU40 ■ ■ ■ ■ ■ ■ ■MAPEFLEX PU45 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■MAPEFLEX PU50SL ■ • ■ ■ ■ ■ • • •

240

SELECTION CHARTS

MAPEI MORTARS FOR REPAIRING CONCRETE

SELECTION CHARTS

Normal-setting thixotropic mortars Rapid-setting thixotropic mortars Normal-setting castable mortars Rapid-setting castable mortars Cementitious binders

Map

egro

utTh

ixot

ropi

c

Map

egro

utT6

0 M

E

Map

egro

ut T

80

Map

egro

ut F

MR

Map

egro

ut

Easy

Flo

w

Map

egro

ut

Easy

Flo

w G

F

Map

egro

ut B

M

Map

egro

ut L

M2K

Map

egro

ut 4

30

Plan

itop

G40

ME

Map

egro

ut

Fast

-Set

Plan

itop

400

Map

egro

ut S

V T

Plan

itop

Smoo

th &

Rep

air

Map

egro

ut

Hi-F

low

Map

egro

ut

Hi-F

low

GF

Map

egro

ut

Hi-F

low

TI 2

0

Map

egro

ut M

E05

Map

egro

ut M

E06

Map

efill

GP

ME

Map

efill

SP

ME

Map

egro

ut S

V

Map

egro

utSV

Fib

er

Stab

ilcem

Stab

ilcem

SCC

Type of repair

Repair of concrete layer around reinforcement rods • • • • • • • • • • • • • • • • • • • • • • • •

Structural repair • • • • • • • • • • • • • • • • • • •

Classification according to EN 1504-3 Standards R4 R4 R4 R4 R4 R4 R4 R3 R3 R3 R3 R3 R4 R2 R4 R4 R4 R4 R4 / / R4 R4 / /

Application

Trowel/flat trowel • • • • • • • • • • • • • •

Continuous-mix rendering machine •

Rendering machine with pre-mixing unit • • • • • • • • •

By casting • • • • • • • • • • •

Civilconstruction

Repairs to the corners of beams and columns • • • • • • • • • • • •

Repairs to the edges of balconies • • • • • • • • • •

Repairs to ceilings • • • • • • • •

Repairs to gutters • • • • •

Repairs to parapets • • • • • • • • • •

Industrial construction

Fixing columns in place • • • • • • • •

Repairs to buffer panels • • • • • • • •

Repairs to floors • • • • • • • •

Repairs to beams and columns • • • • • • • • • • • • • • •

Fixing machinery in place • • • • • • • • •

Infra

stru

ctur

e

Brid

ges

and

viad

ucts

Repairs to piles • • • • • • • • • • • •

Repairs to beams • • • • • • • • • • • •

Repairs to the face of internal floor slabs • • • • • • • • •

Repairs to the face of external floor slabs • • • • • • • • • •

Repairs to pulvinoes • • • • • • • • • • • • • •

Repairs to reinforced concrete bearing elements • • • • • • • • • • • • • • • •

Repairs to kerbs • • • • • • • • •

Repairs to joints in motorways • • • • • •

Hydr

aulic

con

stru

ctio

n Repairs to walls • • • • • • • • •

Repairs to plateaus • • • • • • • • • • •

Repairs to joints • • • • • • • • • • •

Repairs to upstream faces • • • • • •

Repairs to downstream faces • • • • • •

Repairs to overflow channels • • • • • •

Highway maintenance

Fixing inspection shafts, manholes and urban fittings in place • • • • • • • • • •

241

Normal-setting thixotropic mortars Rapid-setting thixotropic mortars Normal-setting castable mortars Rapid-setting castable mortars Cementitious binders

Map

egro

utTh

ixot

ropi

c

Map

egro

utT6

0 M

E

Map

egro

ut T

80

Map

egro

ut F

MR

Map

egro

ut

Easy

Flo

w

Map

egro

ut

Easy

Flo

w G

F

Map

egro

ut B

M

Map

egro

ut L

M2K

Map

egro

ut 4

30

Plan

itop

G40

ME

Map

egro

ut

Fast

-Set

Plan

itop

400

Map

egro

ut S

V T

Plan

itop

Smoo

th &

Rep

air

Map

egro

ut

Hi-F

low

Map

egro

ut

Hi-F

low

GF

Map

egro

ut

Hi-F

low

TI 2

0

Map

egro

ut M

E05

Map

egro

ut M

E06

Map

efill

GP

ME

Map

efill

SP

ME

Map

egro

ut S

V

Map

egro

utSV

Fib

er

Stab

ilcem

Stab

ilcem

SCC

Type of repair

Repair of concrete layer around reinforcement rods • • • • • • • • • • • • • • • • • • • • • • • •

Structural repair • • • • • • • • • • • • • • • • • • •

Classification according to EN 1504-3 Standards R4 R4 R4 R4 R4 R4 R4 R3 R3 R3 R3 R3 R4 R2 R4 R4 R4 R4 R4 / / R4 R4 / /

Application

Trowel/flat trowel • • • • • • • • • • • • • •

Continuous-mix rendering machine •

Rendering machine with pre-mixing unit • • • • • • • • •

By casting • • • • • • • • • • •

Civilconstruction

Repairs to the corners of beams and columns • • • • • • • • • • • •

Repairs to the edges of balconies • • • • • • • • • •

Repairs to ceilings • • • • • • • •

Repairs to gutters • • • • •

Repairs to parapets • • • • • • • • • •

Industrial construction

Fixing columns in place • • • • • • • •

Repairs to buffer panels • • • • • • • •

Repairs to floors • • • • • • • •

Repairs to beams and columns • • • • • • • • • • • • • • •

Fixing machinery in place • • • • • • • • •

Infra

stru

ctur

e

Brid

ges

and

viad

ucts

Repairs to piles • • • • • • • • • • • •

Repairs to beams • • • • • • • • • • • •

Repairs to the face of internal floor slabs • • • • • • • • •

Repairs to the face of external floor slabs • • • • • • • • • •

Repairs to pulvinoes • • • • • • • • • • • • • •

Repairs to reinforced concrete bearing elements • • • • • • • • • • • • • • • •

Repairs to kerbs • • • • • • • • •

Repairs to joints in motorways • • • • • •

Hydr

aulic

con

stru

ctio

n Repairs to walls • • • • • • • • •

Repairs to plateaus • • • • • • • • • • •

Repairs to joints • • • • • • • • • • •

Repairs to upstream faces • • • • • •

Repairs to downstream faces • • • • • •

Repairs to overflow channels • • • • • •

Highway maintenance

Fixing inspection shafts, manholes and urban fittings in place • • • • • • • • • •

242

SELECTION CHARTS

MAPEI PRODUCTS FOR SKIMMING CONCRETE SURFACES AND RENDERS

* Apart from being fully “cured”, substrates must also be “dry”.

Gra

in s

ize:

(mm

):

TYPE OF SETTING

TYPE OF SUBSTRATECOMPOSITION COLOUR

ABSORBENT NON-ABSORBENT

No

rmal

Rap

id

Inte

rnal

ren

der

Ext

erna

l ren

der

“Fre

sh”

rend

er(w

ithin

24

hour

s o

f ap

plic

atio

n

“Cur

ed”

rend

er (m

ore

tha

n

24 h

our

s af

ter

app

licat

ion)

Co

ncre

te

Pla

stic

co

atin

g

Gla

ss m

osa

ics

Po

rcel

ain

tiles

Lim

e-ce

men

t

Cem

entit

ious

Lim

e-g

ypsu

m

Whi

te

Gre

y

Planitop 100 0.1 • • • •

Planitop 110 0.1 • • • • • • •

Planitop 200 0.4 • • • • • • • • • • •

Planitop 207 0.7 • • • • • • • • • • •

Planitop 210 0.4 • • • • • • • • •

Planitop 217 1.0 • • • • • • • • •

Planitop 510 0.4 • • • • • • • •

Planitop 517 1.0 • • • • • • • •

Planitop 530 0.4 • • • • • • • • •

Planitop 540 0.4 • • • • • • • •

Planitop 560 < 0.1 • • • • • • •

Planitop 580 < 0.1 • • •(*) • •

Planitop Fast 330 1.0 • • • • • • •

Planitop Smooth & Repair 0.4 • • • •

Mapefinish 0.4 • • • •

Monofinish 0.4 • • • •

243

Gra

in s

ize:

(mm

):

TYPE OF SETTING

TYPE OF SUBSTRATECOMPOSITION COLOUR

ABSORBENT NON-ABSORBENT

No

rmal

Rap

id

Inte

rnal

ren

der

Ext

erna

l ren

der

“Fre

sh”

rend

er(w

ithin

24

hour

s o

f ap

plic

atio

n

“Cur

ed”

rend

er (m

ore

tha

n

24 h

our

s af

ter

app

licat

ion)

Co

ncre

te

Pla

stic

co

atin

g

Gla

ss m

osa

ics

Po

rcel

ain

tiles

Lim

e-ce

men

t

Cem

entit

ious

Lim

e-g

ypsu

m

Whi

te

Gre

y

Planitop 100 0.1 • • • •

Planitop 110 0.1 • • • • • • •

Planitop 200 0.4 • • • • • • • • • • •

Planitop 207 0.7 • • • • • • • • • • •

Planitop 210 0.4 • • • • • • • • •

Planitop 217 1.0 • • • • • • • • •

Planitop 510 0.4 • • • • • • • •

Planitop 517 1.0 • • • • • • • •

Planitop 530 0.4 • • • • • • • • •

Planitop 540 0.4 • • • • • • • •

Planitop 560 < 0.1 • • • • • • •

Planitop 580 < 0.1 • • •(*) • •

Planitop Fast 330 1.0 • • • • • • •

Planitop Smooth & Repair 0.4 • • • •

Mapefinish 0.4 • • • •

Monofinish 0.4 • • • •

244

SELECTION CHARTS

BONDING AND SEALING

* = ULTRABOND SUPER GRIP is a product for internal use only •= Ideal ■ = Suggested

1-componentacetic silicone sealants

1-componentacrylic sealants

1-component sealants of other

formulations1-component

polyurethane sealants2-component

epoxy-polyurethane sealants2-component

modified polyurethane sealants1-component neutral

silicone sealants1-component hybrid

sealants

Map

esil

Z

Map

esil

Z Pl

us

Map

esil

AC

Map

esil

300°

C

Map

efle

x AC

4

Map

efle

x AC

-P

Map

efle

x AC

-PRO

Map

efle

x AC

-FR

Ultra

bond

Su

per G

rip*

Map

efle

x Fi

rest

op

1200

°C

Map

efle

x Bl

ackf

ill

Map

efle

x PU

40

Map

efle

x PU

45

Map

efle

x PU

50 S

L

Map

efle

x PU

21

Map

efle

x PU

20

Map

efle

x PU

30

Map

efle

x PB

27

Map

efle

x PB

25

Map

efle

x PU

65

Map

esil

BM

Map

esil

LM

Map

efle

x M

S45

Ultra

bond

MS

Rapi

d

seal

ing

exte

rnal

use

depuration plants • • ■ ■production areas ■ • • ■ ■storage tanks ■ • • • • ■safety basins ■ ■ ■ • • • • ■channels ■ ■ ■ • • ■airports • •road joints ■ •car parks ■ • ■ ■ • ■ ■terraces and floor slabs ■ • ■ • ■ • •tiled surfaces • ■ ■ ■ ■ ■external courtyards ■ • ■ • • ■ •swimming pools • •cracks and splits • • • • • ■ ■ •fillets between different materials ■ ■ ■ ■ ■ ■ ■ ■ • ■ • •roofs and coverings • ■ • ■metalwork • ■ • ■ventilated façades ■ • ■ • •façade joints ■ • ■ • ■refractory grout •high temperatures joints • •fire-break joints •fillets for glass/window and door wares • ■ • ■fillets for window and door wares/wall encasements ■ ■ ■ ■ • ■ • •

inte

rnal

use

structural joints • ■ ■ ■ ■ ■ ■ ■ ■ • ■cracks and splits • • ■ ■ • ■ •joints in industrial floors ■ • ■ • ■ ■ •joints in civil floors • ■ • ■ ■ ■ ■ ■ •fillets for sinks/kitchen worktops • • •fillets for walls/kitchen worktops • • •fillets for stone tiles •fillets between tiles ■ ■ • ■ ■ •fillets for sanitary wares • • •fillets for glass/window and door wares • ■ • ■fillets for window and door wares/wall encasements ■ ■ ■ ■ • ■ • •fillets for roller blind/wall encasements • ■ • •

bond

ing

stairway coatings • • • •kitchen worktops • • • •decorative panels • • • •insulating panels • • • •decorative profiles and ceiling roses • • • •window sills and parapets • • •base-boards and doorsteps • • • •signposts • • •bird deterrents • • •bathroom accessories • • • •tiles • • • •beading • • • •cable runs • • • •skirting boards • • • •heavy objects •rapid bonding •

245

1-componentacetic silicone sealants

1-componentacrylic sealants

1-component sealants of other

formulations1-component

polyurethane sealants2-component

epoxy-polyurethane sealants2-component

modified polyurethane sealants1-component neutral

silicone sealants1-component hybrid

sealants

Map

esil

Z

Map

esil

Z Pl

us

Map

esil

AC

Map

esil

300°

C

Map

efle

x AC

4

Map

efle

x AC

-P

Map

efle

x AC

-PRO

Map

efle

x AC

-FR

Ultra

bond

Su

per G

rip*

Map

efle

x Fi

rest

op

1200

°C

Map

efle

x Bl

ackf

ill

Map

efle

x PU

40

Map

efle

x PU

45

Map

efle

x PU

50 S

L

Map

efle

x PU

21

Map

efle

x PU

20

Map

efle

x PU

30

Map

efle

x PB

27

Map

efle

x PB

25

Map

efle

x PU

65

Map

esil

BM

Map

esil

LM

Map

efle

x M

S45

Ultra

bond

MS

Rapi

d

seal

ing

exte

rnal

use

depuration plants • • ■ ■production areas ■ • • ■ ■storage tanks ■ • • • • ■safety basins ■ ■ ■ • • • • ■channels ■ ■ ■ • • ■airports • •road joints ■ •car parks ■ • ■ ■ • ■ ■terraces and floor slabs ■ • ■ • ■ • •tiled surfaces • ■ ■ ■ ■ ■external courtyards ■ • ■ • • ■ •swimming pools • •cracks and splits • • • • • ■ ■ •fillets between different materials ■ ■ ■ ■ ■ ■ ■ ■ • ■ • •roofs and coverings • ■ • ■metalwork • ■ • ■ventilated façades ■ • ■ • •façade joints ■ • ■ • ■refractory grout •high temperatures joints • •fire-break joints •fillets for glass/window and door wares • ■ • ■fillets for window and door wares/wall encasements ■ ■ ■ ■ • ■ • •

inte

rnal

use

structural joints • ■ ■ ■ ■ ■ ■ ■ ■ • ■cracks and splits • • ■ ■ • ■ •joints in industrial floors ■ • ■ • ■ ■ •joints in civil floors • ■ • ■ ■ ■ ■ ■ •fillets for sinks/kitchen worktops • • •fillets for walls/kitchen worktops • • •fillets for stone tiles •fillets between tiles ■ ■ • ■ ■ •fillets for sanitary wares • • •fillets for glass/window and door wares • ■ • ■fillets for window and door wares/wall encasements ■ ■ ■ ■ • ■ • •fillets for roller blind/wall encasements • ■ • •

bond

ing

stairway coatings • • • •kitchen worktops • • • •decorative panels • • • •insulating panels • • • •decorative profiles and ceiling roses • • • •window sills and parapets • • •base-boards and doorsteps • • • •signposts • • •bird deterrents • • •bathroom accessories • • • •tiles • • • •beading • • • •cable runs • • • •skirting boards • • • •heavy objects •rapid bonding •

246

SELECTION CHARTS

WATERPROOFING

* = Exposed waterproofing layers

Horiz

onta

l and

ve

rtica

l sur

face

s

Fille

ts

Join

ts

Cros

s-m

embe

rs

Drai

ns

BATHROOMS and DAMP ENVIRONMENTSMapelastic •Mapelastic Smart •Mapelastic AquaDefense •Mapegum WPS •Monolastic •Mapeband • • •Mapeband PE 120 • • •Drain Lateral •Drain Vertical •SWIMMING POOLSMapelastic •Mapelastic Smart •Mapeproof Swell •Mapeband • •Mapeband TPE •Drain Vertical •BALCONIES and TERRACESAquaflex Roof* •Aquaflex Roof HR* •Mapelastic •Mapelastic Smart •Mapelastic AquaDefense •Monolastic •Mapenet 150 •Mapetex Sel •Mapeband • •Mapeband TPE •Mapeproof Swell •Drain Lateral •Drain Vertical •Drain Front •

247• After carrying out the render with Planitop HDM Maxi. • Special application.

Plat

eau

Post

-cas

t wal

ls

Pre-

cast

wal

ls

Rein

forc

ed c

oncr

ete

wal

ls w

ith n

egat

ive li

ft

Bric

k w

alls

with

ne

gativ

e lif

t

Lift

shaf

t

Pile

hea

ds

Stru

ctur

al jo

int

Cons

truct

ion

join

t

Thro

ugh

bodi

es

UNDERGROUND STRUCTURESMapeproof • • • • •Mapeproof LW • • • • •Mapeproof Mastic • •Mapeproof Swell • • • •Idrostop • • •Idrostop B25 • • • •Idrostop Soft • • • •Mapeband • •Mapeband TPE •Idrostop PVC BI/BE ME • • • • • •Idrosilex •Idrosilex Pronto • • • •Mapelastic Foundation • • • •Lamposilex • • • •Resfoam 1KM • • • •Plastimul •Plastimul 1K Super Plus •Plastimul 2K Plus •Plastimul 2K Super •

248

SELECTION CHARTS

Before applying dehumidifying render (made from MAPE-ANTIQUE LC mixed with aggregates, MAPE-ANTIQUE CC, MAPE-ANTIQUE MC or MAPE-ANTIQUE MC MACCHINA, always apply a layer of MAPE-ANTIQUE RINZAFFO, around 5 mm thick.

MAPE-ANTIQUE - REPAIR OF MASONRY

Mape-A

nti

que I

Su

per-

fluid

inje

ctio

n sl

urry

Mape-A

nti

que F

21

Supe

r-flu

id in

ject

ion

slur

ry

Mape-A

nti

que L

C

Bind

er fo

r mor

tar

Mape-A

nti

que

Rin

zaff

o

Sc

ratc

h-co

at m

orta

r

Mape-A

nti

que C

C

Dehu

mid

ifyin

g re

nder

Mape-A

nti

que M

C

De

hum

idify

ing

rend

er

Mape-A

nti

que M

C

Macc

hin

a

De

hum

idify

ing

rend

er

Mape-A

nti

que

Into

naco

NH

L

Tran

spira

nt re

nder

Mape-A

nti

que

Str

utu

rale

NH

L

Stru

ctur

al re

nder

Mape-A

nti

que F

CU

ltra

fine

Ultra

fine

-gra

ined

text

ure

plas

ter

Mape-A

nti

que F

CC

ivile

Fine

-gra

ined

text

ure

plas

ter

Mape-A

nti

que F

CG

ross

o

Coar

se te

xtur

e pl

aste

r

Mape-A

nti

que

Allett

am

ento

Mas

onry

and

poi

ntin

g m

orta

r

Consolidating “cement-core” walls and masonry in general where there are internal cracks, gaps and cavities by injection

Consolidating foundation elements, pillars, vaulted roofs and arches by injection

Consolidating structures with murals or elements of particular historical and artistic interest by injection

Restoring the adhesion between masonry substrates and render, including frescoed walls

Consolidating trellis vaulted ceilings by injection

“Stitching” fractures, wall bays, angle joints, etc.

(+ steel rods, MAPEROD or CARBOTUBE)

(+ steel rods, MAPEROD or CARBOTUBE)

“Tacking” or “cladding” operations(+ aggregates)

Scratch-coats on weak and/or porous masonry before applying transpirant and “structural” render

Site-mixed dehumidifying render with locally-sourced aggregates (+ aggregates)

Dehumidifying render

Transpirant render

Reinforced “structural” render (+ zinc-plated metallic mesh)

Skimming dehumidifying, transpirant and “structural” render

Building or rebuilding facing walls with site-mixed masonry mortar with locally- sourced aggregates (+ aggregates)

Building stone, brick tuff and mixed masonry

Pointing masonry joints on “exposed” masonry(+ aggregates)

Making “reinforced” joints or installation mortar (+ steel rods or MAPEROD)

Evening out external faces of vaulted roofs

Making reinforced “caps” on the external face of vaulted roofs (+ zinc-plated

metallic mesh)

Ideal

Possible

PROBLEMS

249249

Mapei GroupEurope

AUSTRIA - Mapei GmbHFräuleinmühle 2 A - 3134 Nußdorf ob der TraisenTel. +43-2783-8891 - Fax +43-2783-8893Internet: http://www.mapei.atE-mail: [email protected] in Nußdorf ob der TraisenDistribution centres in Wien, Hall in Tirol and Graz

BELGIUM - LUXEMBOURGMapei Benelux SA/NVZoning Industriel - Rue de l’Avenir, 40B - 4460 Grâce-HollogneTel. +32-4-2397070 - Fax +32-4-2397071Internet: http://www.mapei.beE-mail: [email protected]

BULGARIAMapei Bulgaria LTDBusiness Park Mladost 4Building 8A, floor 6 - 1766 Sofia, BulgariaTel. +359 (2) 4899775 - Fax +359 (2) 4898723Internet: http://www.mapei.bgPlant in Ruse

CROATIA - Mapei Croatia d.o.o.Purgarija 14 - Kerestinec10431 Sveta NedeljaTel. +385-1-3647789 - Fax +385-1-3647787Internet: http://www.mapei.hrE-mail: [email protected]

CZECH REPUBLIC Mapei spol. s r.o.Smetanova 192 - 77211 OlomoucTel. +420-585224580 Fax +420-585227209Internet: http://www.mapei.czE-mail: [email protected] centre in Prague

DENMARK - Mapei Denmark A/SFalkoner Allé 7,4 2000 FredriksbergTel. +45-69 60 74 80Fax +45-69 60 74 89Internet: http://www.mapei.dkE-mail: [email protected]

FRANCE - Mapei France SAZone Industrielle du TerroirAvenue Léon Jouhaux, 29 31140 Saint AlbanTel. +33-5-61357305Fax +33-5-61357314Internet: http://www.mapei.frE-mail: [email protected] in Saint Alban, Montgru Saint Hilaire and Saint Vulbas

GERMANY - Mapei GmbHBahnhofsplatz 10 - 63906 ErlenbachTel. +49-9372-98950Fax +49-9372-989548Internet: http://www.mapei.deE-mail: [email protected] in Weferlingen

GREAT BRITAIN - Mapei U.K. LtdMapei House - Steel Park Road - Halesowen - West Midlands B62 8HDTel. +44-121-5086970Fax +44-121-5086960Internet: http://www.mapei.co.ukE-mail: [email protected] in Halesowen

GREECE - Mapei Hellas SAP.O. Box 19243 - 34100 ChalkidaTel. +30-22620-71906 Fax +30-22620-71907Internet: http://www.mapei.grE-mail: [email protected] in Ritsona

HUNGARY - Mapei KftSport utca 2. - 2040 BudaörsTel. +36-23-501667 - Fax +36-23-501666Internet: http://www.mapei.huE-mail: [email protected] in Sóskút

NORWAY - Mapei ASVallsetvegen 6 - 2120 SagstuaTel. +47-62-972000 - Fax +47-62-972099Internet: http://www.mapei.noE-mail: [email protected] in Sagstua

POLAND - Mapei Polska Sp.z o.o.ul. Gustawa Eiffel’a 14, 44-109 GliwiceTel. +48-32-7754450 - Fax +48-32-7754471Sales office:ul. Chałubińskiego 8, 00-613 WarszawaTel. +48-22-5954200 - Fax +48-22-5954202Internet: http://www.mapei.plE-mail: [email protected] in Gliwice and Barcin

PORTUGAL - Lusomapei S.A.Business Parque Tejo XXIEstrada Nacional 1 - Km 29, Gelfas2600-659 Castanheira do RibatejoTel. +351 263 860 360Fax +351 263 860 369Internet: http://www.mapei.ptE-mail: [email protected] in Anadia

ROMANIA - Mapei Romania SRL14 Gen. Ion Dragalina Str. Sector 5 - BucarestTel. +40-21-3117819 Fax +40-21-3117821Internet: http://www.mapei.roE-mail: [email protected]

RUSSIAN FEDERATION - ZAO MapeiDerbenevskaya nab., 7, building 4, 3-d floorMoscow 115114 Russian FederationTel. +7-495-258-5520 - Fax +7-495-258-5521Internet: http://www.mapei.ruE-mail: [email protected] in Stupino

SLOVAK REPUBLIC - Mapei SK sroNádražná 39, 900 28 Ivanka pri DunajiTel. +421-2-4020 4511Fax +421-2-4020 4523Internet: http://www.mapei.skE-mail: [email protected]

SLOVENIA - Mapei dooKočevarjeva 2 - 8000 Novo MestoTel. +386-1-7865050/51Fax +386-1-7865055Internet: http://www.mapei.siE-mail: [email protected] centre in Grosuplje

Representative office in Serbia (Belgrado):Tel. +381-11-3474-694Fax +381-11-3474-695

SPAIN - Ibermapei SAC/Valencia 11 - Pol. Ind. Can Oller08130 Santa Perpetua de Mogoda (Barcelona)Tel. +34-93-3435050 Fax +34-93-3024229Internet: http://www.mapei.esE-mail: [email protected] in Amposta (Tarragona) and Cabanillas del Campo (Guadalajara)Distribution centres in Badalona (Barcelona), Onda (Castellón) and Marratxi (Mallorca)

SWEDEN - Mapei ABSmidesvägen 10, 6 tr. 17141 SolnaTel. +46-8-52509080Internet: http://www.mapei.seE-mail: [email protected]

SWITZERLAND - Mapei Suisse SA1642 Sorens / FRTel. +41-26-9159000 Fax +41-26-9159003Internet: http://www.mapei.chE-mail: [email protected] in Sorens

THE NETHERLANDS Mapei Nederland B.V.Twentepoort Oost 27 7609 RG AlmeloTel. +31-546-836040 Fax +31-546-836044Internet: http://www.mapei.nlE-mail: [email protected]

UKRAINE - Mapei Ukraine LLC02002, Kiev13. M. Raskovoy, 5th floorTel. +38-044-221-15-01, 221-15-02Fax +38-044-393-14-52Internet: http://www.mapei.uaE-mail: [email protected] centres in Zazimje village, 6, Radgospana str.

AUSTRALIA - Mapei Australia Pty Ltd12 Parkview Drive ArcherfieldBrisbane - Queensland 4108Tel. +61-7-3276 5000Fax +61-7-3276 5076Internet: http://www.mapei.com.auE-mail: [email protected] in Brisbane

CHINA - Mapei Construction Materials (Guangzhou) co. Ltd.Contact address: Room 2003-4, Hong Fu Loi International Building, No. 313, Yan Jiang Zhong Road, Guangzhou, China 510110Tel. (86-20) 8365 3489Fax (86-20) 8365 3481Internet: http://www.mapei.com.cn Email: [email protected] Plant in Conghua (Guangzhou)

CHINA - Mapei Construction Materials (Shanghai) co. Ltd.No. 6, Lane 8999, Hunan Road, Pudong New District, Shanghai, China 201314Tel. (86-21) 5818 0808Fax (86-21) 5818 0909Internet: http://www.mapei.com.cn E-mail: [email protected] Plant in Pudong New District (Shanghai)

HONG KONG S.A.R. Mapei China Ltd9/F, Linkchart Centre, 2 Tai Yip Street, Kwun Tong, Kowloon, Hong KongTel. +852-21486816 Fax +852-25121328Internet: http://www.mapei.com.hkE-mail: [email protected]

INDIA - Mapei Construction Products India Private Limited# 402, 3rd Floor, Tudor CourtNo. 40, Lavelle Road, Bangalore - 560 001Tel. +91 80 2222 1820, 2222 1840Fax +91 80 2222 1810Internet: www.mapei.comE-mail: [email protected] in Bangalore

KOREA - Mapei Korea Ltd.121-270, 14th floor, Hansol Gyoyuk Bldg, Iaan Sangam 2 danji 1653 Sangam-dong, Mapo-gu, SeoulTel. +82-2-6393-2300Fax. +82-2-6393-2323Internet: http://www.mapei.co.krE-mail: [email protected] in Jincheon (Chungcheongbuk-do)

MALAYSIA Mapei Malaysia Sdn BhdPT521, Batu 23 Jln Rawang/Jln Batang Berjuntai48000 Rawang - Selangor Darul EhsanTel. +603-60935799 Fax +603-60915801Internet: http://www.mapei.com.myE-mail: [email protected] in Rawang (Selangor Darul Ehsan)

NEW ZEALAND - Mapei New Zealand30 Fisher Crescent - Mt. WellingtonAuckland, New ZealandTel. +64-9-9211994 Fax +64-9-9211993Internet: http://www.mapei.co.nzE-mail: [email protected]

SINGAPORE - Mapei Far East Pte Ltd28, Tuas West Road Singapore 638383Tel. +65-68623488Fax +65-68621012 / 68621013Internet: http://www.mapei.com.sgE-mail: [email protected] in Singapore

UNITED ARAB EMIRATESI.B.S. (Innovative Building Solutions) L.L.C.Building No. 5, 2nd FloorGreen Community - Dubai Investment ParkP.O. Box 73869, Dubai, UAETel. +971-4-815 6666Fax +971-4-815 6655Internet: http://www.mapei.aeE-mail: [email protected] in Dubai

VIETNAM - Mapei Vietnam Ltd.Plot 8, Street No. 4, Northern Part of Chu Lai I.Z.Tam Hiep Commune, Nui Thanh District, Quang Nam Province - VietnamTel. (84-510) 3565 801-7Fax (84-510) 3565 800Internet: http://www.mapei.vnE-mail: [email protected]

Branch in Hanoi Capital:Tel. (84-4) 3928 7924-6Fax (84-4) 3824 8645E-mail: [email protected]

Branch in Danang City:Tel. (84-511) 3565 001-4Fax (84-511) 3562 976E-mail: [email protected]

Branch in Ho Chi Minh City:Tel. (84-8) 3512 1045 or 3899 2845Fax (84-8) 3899 2842E-mail: [email protected] in Chu Lai (Quang Nam Province)

Asia-Oceania

Africa

The AmericasARGENTINA - Mapei Argentina SARondeau 51, 1° floor, Wilde Buenos AiresTel. +54-11-42070009Fax +54-11-42171088Internet: http://www.mapei.com.arPlant in Buenos Aires

CANADA - Mapei Canada Inc.2900 Francis-Hughes AvenueLaval, QC H7L 3J5Tel. +1-450-662-1212Fax +1-450-662-0444Internet: http://www.mapei.comPlant in Vancouver (BC), Laval (QC),Maskinongé (QC), Brampton (ON)Distribution centre in Calgary (AB)

MESSICO Mapei de Mexico, S.A. DE C.V.Pirineos 515, Bodega 45Microparque SantiagoZona Ind. Benito JuarezQueretaro, Qro. CP 76128Tel. 0-1-800-696-2734Fax (442) 209-5024Internet: http://www.mapei.comE-mail: [email protected]

PANAMA - Mapei Construction Chemicals Panama S.A.Via Transistmica, Complejo Bodegas America - Panama CityTel./Fax +507 261 9549-50Internet: http://www.mapei.comE-mail: [email protected] in Panama City

PUERTO RICO - Mapei Caribe Inc.Road 2 km 26.2 BO. EspinosaDorado, Puerto Rico 00646Tel. (787) 270-4162Fax (787) 883-1669 Internet: http://www.mapei.comPlant in Dorado

U.S.A. - Mapei Corporation1144 East Newport Center DriveDeerfield Beach, Florida 33442Tel. +1-954-246-8888 / +1-888-300-4422Fax +1-954-246-8800Internet: http://www.mapei.comPlants in Tempe (AZ), Garland (TX),South River (NJ), Fort Lauderdale (FL),West Chicago (IL), Fredericksburg (VA),San Bernardino (CA), Dalton (GA)

VENEZUELA Mapei de Venezuela CACalle Orinoco Torre D&D PB Lc 11-12Urb. Las Mercedes - 1071 CaracasTel. +58-212-991-1797/+58-212-991-9423Fax +58-212-991-7623Internet: http://www.mapei.comE-mail: [email protected] in Caracas

SOUTH-AFRICA Mapei South Africa (Pty) LtdUnit 2C, Anchor Industrial ParkC/o Springbok and Taljaard RoadBartlett, Johannesburg, South AfricaTel. +27-11-5528476 Fax +27-11-5528449Internet: http://www.mapei.co.zaE-mail: [email protected] in Bartlett

HEAD OFFICE PLANTS• Strada Provinciale 159 - 20060 Robbiano di Mediglia (Milan) Tel. +39-02-906911 - Fax +39-02-90660575

• Via Mediana S.S. 148 km 81,3 - 04100 Latina Tel. +39-0773-2548 - Fax +39-0773-250391

DISTRIBUTION CENTRESASSUOLOVia Valle D’Aosta, 46 - 41049 Sassuolo (Modena)Tel. +39-0536-803116 - Fax +39-0536-805255

Office in RomeViale Libano, 28 - 00144 Rome Tel. +39-06-5929211 - Fax +39-06-59290337

Office in LecceVia Adriatica, 2 B (angolo viale Porta d’Europa)73100 LecceTel. +39-0832-246551 - Fax +39-0832-248472E-mail: [email protected]

MAPEI SpAVia Cafiero, 22 20158 Milan (Italy)Tel. +39-02-37673.1 Fax +39-02-37673.214http://www.mapei.com E-mail: [email protected]

GENE

RAL

CATA

LOGU

E, M

IDDL

E EA

ST J

ANUA

RY 2

013

HEAD OFFICEMAPEI S.p.A. Via Cafiero, 22 - 20158 MilanTel. +39-02-37673.1 Fax +39-02-37673.214Internet: www.mapei.comE-mail: [email protected]

GENERAL CATALOGUE

MIDDLE EAST

JANUARY

2013


C.P

. MK

014

(UA

E) 0

1/13

UNITED ARAB EMIRATESI.B.S (INNOVATIVE BUILDING SOLUTIONS) LLC P.O. Box: 73869, Dubai - United Arab EmiratesTel. +971-4-815 6666 Fax +971-4-815 6655Internet: www.mapei.aeE-mail: [email protected]

mapei general catalogue me jan 2013 uae

Documents

complementary products

reactive adhesives

waterproofing products

finishing products

polyurethane sealants

coloured sealants

hybrid sealants

elastic sealants